Ceetec Avtomat Za Brizganje Letvic nakup rabljenega (84.709)

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 2 h, hitrost pomika os X: 200 m/min, delovna širina: 400 mm, skupna dolžina: 2.150 mm, delovna višina: 950 mm, vhodna napetost: 400 V, skupna masa: 1.850 kg, priključek za stisnjen zrak: 8 letvica, Painting: Affordable. Fast. Perfect. Simple. The Ceetec IPS400 TopFlow Strip Spraying Machine – For manufacturers of strips, planing mills producing profile boards, and many others. You know the scenario: A traditional painting machine can take a relatively long time to set up depending on the operator, generates excessive overspray, provides only limited visibility, and requires thorough daily cleaning. Not so with the TopFlow: It stands out with ultra-quick changeover times, excellent visibility, and stores all your operator expertise – including mechanical parameters. Can it get any better? Everything in record time: 1. Colour change from 3 minutes. 2. Cleaning in 10 minutes. 3. Profile change in seconds! => One touch and the spray guns move into position Knowledge storage: All settings are saved in the program and remain available. Lsdpfxeffc Uns Anfjhg Economical: Even less overspray – and when it occurs, it's of the highest quality.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.000 mm, Pršilni avtomat Proizvajalec: Leif Lorentz Tip: B3 Primeren za vodne lake in izdelke na vodni osnovi. Delovna širina: 1000 mm Prehodna višina: ca. 110 mm Opremljen z: Ljdpexmrdxefx Anfjhg 1x visokotlačna batna črpalka Dete MX 32 Maks. vhodni zračni tlak: 0,8 MPa (8 bar) Razmerje tlaka: 32:1 Maks. delovni tlak: 25,6 MPa (256 bar) Maks. pretok pri prostem pretoku: 11 l/min 5x avtomatske airless brizgalne pištole Podajanje nastavljivo, transport obdelovanca preko transportnega traku (transportni trakovi obnovljeni!) Z integriranim sistemom za povrnitev laka: lak, lazuro ali olje se ujame in ponovno uporabi Integriran filtrirni sistem Stroj se trenutno čisti in tehnično pregleduje. Prodaja v delujočem stanju. Dobavni rok: ca. 3 tedne

Leto izdelave: 2016, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, A Wittmann automation system was newly installed in 2016 and used on a Netstal Synergy 2000. All documents, operating manuals, maintenance schedules, measurement diagrams, etc. are included, as well as control modules, power supply units, and control panels. The Wittmann picker can be used as a stand-alone unit. TECHNICAL DETAILS Travel distance X / Y / Z: 900 / 1800 / 3000 mm Lsdpfxspm Htgo Anfshg Load capacity: 15 kg Scope of supply: robot, console, support V/2614-3104, adapter, standard MB conveyor system, SE safety housing including safety door with SIPA MACHINE DETAILS System dimensions (LxWxH): 6560 x 4423 x 4154 mm Robot weight: 560 kg Power connection: 3PH/N/PE Mains voltage: 400 V Permissible voltage fluctuations: up to 10% Connected load: 11 kVA Frequency: 50-60 Hz Permissible frequency fluctuations: up to 2% Supply line fuse: 16 A Compressed air: max. 6 bar System function maintenance: min. 5 bar

Stanje: novo, Leto izdelave: 2005, Screw diameter: 60 mm Ljdpfx Ajvkqfaenfshg Shot weight in polystyrene: 607 g/PS Clamping force: 3200 kN Control system: SELOGICA Mould installation height: 300 mm Mounting platen: 1040 x 1040 mm Opening stroke: 700 mm Total power requirement: 96 kW Machine weight: approx. 17 t Space requirement: approx. 7 x 2.2 x 2.3 m This injection moulding machine is in very good condition, can be inspected at the seller’s site by appointment, and is offered including Multilift H. Operating hours: 42,878 h

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 21.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.250 kN, premer vijaka: 40 mm, delovna prostornina: 217 cm³, tlak vbrizgavanja: 2.377 letvica, hod izmetalca: 150 mm, odmični hod: 600 mm, skupna dolžina: 4.480 mm, skupna širina: 1.510 mm, skupna višina: 2.190 mm, skupna masa: 6.000 kg, moč: 18,5 kW (25,15 KM), Oprema: dokumentacija / priročnik, In perfect shape. Lhsdpfx Ajwlhb Tonfjg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 23.905 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 600 kN, premer vijaka: 35 mm, delovna prostornina: 135 cm³, tlak vbrizgavanja: 2.221 letvica, odmični hod: 335 mm, skupna dolžina: 2.420 mm, skupna širina: 1.700 mm, skupna višina: 3.100 mm, skupna masa: 6.700 kg, Oprema: dokumentacija / priročnik, Prodajam vzdrževan stroj za brizganje ENGEL INSERT 200V/60 z le 23.905 delovnimi urami. Stroj je bil uporabljen izključno za vzorčenje. Ogled pod električnim tokom je možen kadarkoli! Tehnični podatki so vidni na slikah! Stroj je takoj na voljo! Lhodpfx Asy Iwlaonfjg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 1.600 mm, skupna širina: 1.400 mm, skupna višina: 3.350 mm, vhodna napetost: 400 V, skupna masa: 750 kg, vrsta vhodnega toka: trifazni, Lisec 2-stezni aplikator plute APKV-25/2, letnik 2001, smer delovanja levo/desno, v dobrem obratovalnem stanju. Ledpsy Tl Tcsfx Anfehg Stroj si je po dogovoru mogoče ogledati v našem skladišču v Hofkirchnu/Avstrija.

Stanje: rabljeno, Naprava za dovod zraka tip 3072 A 7300/3650 m³/h, največja grelna moč 83 kW, vroča voda 90/70 °C. Naprava za odvod zraka tip 72, 7000/3500 m³/h. Lokacija skladišča: Nattheim. Lhsdpfow I A N Aex Anfog

Stanje: rabljeno, Leto izdelave: 2003, vpenjalna sila: 150 kN, delovna prostornina: 399 cm³, tlak vbrizgavanja: 1.598 letvica, skupna masa: 7.500 kg, premer polžastega transporterja: 50 mm, Dobavni pogoji: iz lokacije Dobavni rok: po dogovoru Lhsdpfsy T Sm Nex Anfog Plačilni pogoji: 100% pred prevzemom stroja, neto

Stanje: rabljeno, Demag Ergotech 3300-840, stroj za brizganje plastike Demag, rabljeni stroj Proizvajalec: Demag, Sumitomo Model: Ergotech 3300-840 Skupne dimenzije (D x Š x V): 6,5 x 2,0 x 2,2 metra Lastna teža (brez olja): 13.800 kg TEHNIČNI PODATKI (GLEDE NA PREMER POLŽA) ----- Opis Enota "A" "B" "C" ----- Premer polža: [mm] 45 50 60 Razmerje L/D: [-] 20 20 20 Tlak vbrizgavanja (pri 400 °C): [bar] 2402 1946 1351 Volumen brizga: [cm3] 358 442 636 Teža brizga (PS): [g] 320 400 570 Moč grelca cilindra: [kW] 13,0 14,8 23,1 Vgrajena električna moč*: [kW] 58/68 60/70 68/78 ----- * Opomba: Vrednosti so višje pri električnem pogonu polža (WA). LASTNOSTI VBRIZGAVALNE ENOTE ----- Največji hod doziranja: 225 mm Maks. umik šobe: 470 mm Globina potopa šobe: 40 mm (SVO) / 30 mm (SPI) Sila pritiska šobe: 80 kN Električni pogon polža (WA): 20,5 kW Kapaciteta lijaka za material: 75 litrov SPLOŠNI IN HIDRAVLIČNI PODATKI ----- Kapaciteta rezervoarja za hidravlično olje: 700 litrov Lhedpfjx Sqi Hox Anfeg Moč črpalne enote: 45 / 55 kW Suh cikel (EUROMAP 6a): 1440 / 1600 h-1 Suh cikel (brez gibanja šobe): 1890 / 2100 h-1 Nenehna raven hrupa: 74 dB (A)

Stanje: rabljeno, Leto izdelave: 2024, vpenjalna sila: 650 kN, delovna prostornina: 2.212 cm³, tlak vbrizgavanja: 2.090 letvica, skupna masa: 28.000 kg, premer polžastega transporterja: 80 mm, Dobavni pogoji: iz lokacije Dobavni rok: po dogovoru Plačilni pogoji: 100% pred prevzemom stroja, neto Lhjdpfx Anoy Tbzvefog

Stanje: rabljeno, Leto izdelave: 2011, Length 5,000 mm Width 100 mm Height 2,800 mm Year of manufacture 2011 Range+Heine coating system for the finishing of individual wood window parts and frames For sale on behalf of a customer ----- Lhedjy Ty E Hjpfx Anfjg Technical manufacturer description: Workpiece dimensions: Length: 5,000 mm Height: 2,800 mm Width: max. 100 mm Coating system: Designed for use with materials specified by the respective paint manufacturer, with a low solvent content (VOC value), water-based, and non-flammable. Capacity: min. 40 carrier bars/shift, approx. 60 window elements/shift (without forced drying) Process (1 cycle runs through twice): - Flood coating - Drying - Inspection / application of joint sealant - Spraying - Drying ----- Item 1: Conveyor Technology 1 Power + Free circular conveyor Routing according to drawing 11-138-010a Essentially consisting of: 3 drives with geared motors for the main chains with frequency-controlled speed (see layout). Various running rails, horizontal bends, chains, tensioning stations, pneumatically/electrically controlled stop stations 50 carrier bars, each 5,000 mm long (max. load 250 kg) Automatic tilting of carrier bars in drip section after flood coating unit 1 conveyor system control (Siemens S7-300 PLC) Programmable buffer storage Continuously adjustable drives. 1 lifting and lowering station for loading/unloading workpieces (max. stroke 2,000 mm) 1 set of steel construction for fastening the conveyor system ----- Item 2: Flood Coating Unit 1 flowcomat II-P 1 clear (colourless) priming unit Maximum workpiece width: approx. 180 mm Consisting of: 1 coating tunnel, 1 Flowcodrive swivel mechanism, 2 flooding lances, each with max. 3 nozzles installed. 1 accessory kit for cleaning the unit 1 external stainless steel sieve 1 paint supply 1 control unit ----- Item 3: Additions to flood coating unit 1 drip tray and drip area in the evaporation section behind the flood coating unit After flood coating, the carrier bars move into a drip buffer. Dripping coating material is collected on the PP non-stick collecting area (and drip channel) and returned to the flood coating unit. Rinse water is collected and pumped out from within the unit. All paint-contacting areas are made of PP for easy cleaning of dried paint. 1 humidification unit 1 control device for the humidification unit Complete with regulator for humidification volume 1 hygrostat for detecting room humidity and activating the humidification nozzles 3 humidification nozzles for the drip buffer 1 coagulation unit 1 R+H waco 200 coagulation unit – 200 l collection tank ----- Item 4: Top Coat Spray Booths 2 spray booths for topcoat application 2 extraction walls with sandwich panel cladding for the working area. Fan 16,000 m³/h Filter area: - 3 sets Ecola pre-separators - 1 set Paintstop filter - 1 set pocket filter Recirculation distribution ceiling, clamped in a frame design Air volume 12,000 m³/h Approx. 75% recirculated air – 25% exhaust operation (The exhaust air volume is taken from the factory hall) Installed on a building-side foundation as per layout 2 Prolac overspray recovery towers ----- Item 5: Addition to topcoat spray booths 3 humidification nozzles for the evaporation section after topcoat application ----...

Stanje: dober (rabljeno), Leto izdelave: 2010, Raven odlagalni trak za avtomatizacijo (na primer vmesno odlaganje 'duharske izmene', pufer). Sestavljen iz dveh trakov: na enem so prazne škatle, na drugem pa napolnjene škatle. Oba transportna trakova sta opremljena s standardom EUROMAP67. Zaradi tega se lahko trakova programirata skupaj s strojem in odvzemnim robotom. Proizvajalec: KRAUSS MAFFEI Leto izdelave: 2010 Dolžina transportnih trakov: vsak po 6,00 m Skupna širina transportnih trakov: 1,75 m Lhodpfsy Spixjx Anfsg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 138337-100, vpenjalna sila: 9.000 kN, premer vijaka: 105 mm, tlak vbrizgavanja: 1.931 letvica, hod izmetalca: 300 mm, odmični hod: 2.100 mm, TEHNIČKI DETALJI Ljdpfx Ajy T Hprsnfjhg Prečnik puža: 105 mm Hod puža: 525 mm Odnos L/D puža: 22 Teorijski volumen šuta: 4.545 cm³ Pritisak ubrizgavanja: 1.931 bar Maksimalna brzina obrtanja puža: 167 o/min Maksimalni kapacitet plastifikacije: 151 g/s Obrtni moment puža: 8.000 Nm Hod mlaznice / Sila potiska mlaznice: 950 mm / 129 kN Protok ubrizgavanja: 725 cm³/s Protok ubrizgavanja sa duplom pumpom (opcija): 906 cm³/s Protok ubrizgavanja vazduha sa rezervoarom (opcija): 1.812 cm³/s Snaga grejanja cilindra: 53,9 kW Broj zona grejanja: 7 Sila zatvaranja: 9.000 kN Maksimalni hod otvaranja: 2.100 mm Min./Max. visina alata: 500 – 1.000 mm Veličina ploča: 1.720 x 1.550 mm Razmak stubova: 1.200 x 1.000 mm Hod izbacivača: 300 mm Sila izbacivača: 165 kN Sila otvaranja alata: 300 kN DETALJI MAŠINE Snaga pumpe: 90 kW Snaga grejanja: 53,9 kW Zapremina rezervoara za ulje: 1.100 l Dimenzije i masa Dimenzije mašine (D x Š x V): 10.100 x 3.400 x 2.700 mm Masa: 35.200 kg

Stanje: rabljeno, Leto izdelave: 2004, Brizgalni stroj Boy 22D, letnik 2004 Lodpfxsy Tv Ids Anfehg Brizgalni stroj Boy 22D, letnik 1999

Stanje: rabljeno, Leto izdelave: 2013, Brizgalni stroj Arburg 630H 2500-1300, letnik 2013 Brizgalni stroj Husky H4 300 RS55/50, letnik 2018 Lhjdpfx Asy Tv E Nonfeg

Stanje: rabljeno, Leto izdelave: 2005, Injection Moulding Machine Manufacturer: Krauss Maffei Model: KM350 /1900 C2 Year of Manufacture: 2005 Clamping Force: 3,500 kN Mould Opening Force: 220 kN Drive Force Moving Platen: Opening: 105 kN Closing: 95 kN Clamping Plate (W x H): 1,060 x 1,095 mm Clear Space Between Tie Bars (W x H): 710 x 710 mm Mould Opening Stroke: 920 mm Min. Mould Installation Height: 380 mm Max. Daylight: 1,300 mm Ejector Stroke: 250 mm Ejector Force Forward/Return: 95 / 48 kN Pump Motor: 75 kW Installed Heating Capacity: 30 kW Heater Zones (Barrel Heating): 6 Dry Cycle Time: 1,550 1/h Oil Capacity: 720 l Dimensions & Weight: Net Weight with Control Cabinet: approx. 16.0 t (L x W x H): 6,510 x 2,040 x 2,380 mm Max. Mould Weight: 4,780 kg Injection Unit: Working Capacity: 1900 Screw Diameter: 70 mm Injection Pressure: 1,778 bar Shot Volume: 1,047 cm³ Shot Weight for PS: 953 g Injection Flow Rate: 527 cm³/s Screw Speed Standard / Option: min⁻¹ 285/349 Screw Speed Standard or Stage 1: 95 PS Screw Speed Option or Stage 2: 117 PS Nozzle Contact Force: 82 kN Fully hydraulic two-platen clamping system Lodpfx Aoxu Uvaenfshg PV control for injection unit MC4 32-bit microprocessor control Integrated operator panel with TFT colour display and 3.5” floppy disk drive for data backup Plasticizing: 1 complete thermoplast plasticizing unit in wear-resistant design, screw diameter 70 mm with non-return valve and open nozzle Nozzle radius: 15.00 mm Nozzle orifice: 6.00 mm 19526ä

Stanje: rabljeno, Leto izdelave: 2018, Avtomatski etiketirni stroj, podajalnik etiket Macro SP12 desni RA1956 Proizvajalec: Schwinn Model: Macro SP 12 Leto izdelave: 2018 Usmeritev: desna Prehod etikete: do 115 mm Hitrost etiketiranja: 1–18 m/min Največji premer koluta z etiketami: 300 mm Lhjdpfxjk Abm As Anfjg Premer tulca 40 mm z adapterjem prilagodljiv Priključek: euro vtič 230/50Hz Integrirano krmiljenje z nastavitvenimi parametri, upravljalnimi vhodi in izhodi, signalizacijo napak, ... Dodatna oprema: Zunanji zagon AP 010-500 vakuumski aplikatorski modul Kombinacija za vzdrževanje in upravljanje Adapter za tulec AP 031 predhodno opozorilo – zaloga etiket Montažni okvir Nadzorna omarica Opozorilna luč, 3-stopenjska

Stanje: rabljeno, Leto izdelave: 2018, Ser. št. 221921, krmilna enota, proizvajalec Engel, tip CC300, zapiralna sila 1.700 t, 2 brizgalni enoti, vrtljiva miza, vgradna višina min./max. 800 – 1.600 mm, razmik plošč 3.350 mm, svetla širina/v. 1.850 / 1.415 mm, 16 kaskad, 64 vročih kanalov, hidravlični vleki jeder 4 (DS) / 4 (AS), premer polža 105 / 50 mm, brizgalna masa 4.050 / 410 g, obratovalne ure 22.401, teža stroja 75.400 kg, temperiranje orodja, proizvajalec Oni, tip Rhytemper FlexControl 32, 4x 8-kratni blok moduli 125 °C, 6-kratni blok moduli 125 °C, vizualizacijska enota, ročni manipulacijski sistem za odvzem kosov, proizvajalec Engel, tip Viper 60, 5 osi (X,Y,Z,C,B-os), razdalja šob 300 mm, letnik 2018, ser. št. 221938, ohišje za dele, izhodni transportni trak, mobilni transportni trak, proizvajalec Engel, tip BGR FB100 KMAT, letnik 2018, ser. št. 2144098, dolžina cca 4.200 mm, širina 1.000 mm, zunanja temperirna naprava in doziranje materiala nista vključena v ponudbo. Poškodbe: puščajoče hidravlične cevi. Lhedpfoy I R Tqjx Anfsg

Stanje: rabljeno, Leto izdelave: 2018, Serial no. 221920, control unit: Engel CC300, clamping force 800 t, 2 injection units, rotary table, min./max. mould height 500–1,100 mm, platen distance 2,100 mm, clear opening horizontal/vertical 1,170/1,000 mm, 8 cascades, 48 hot runner zones, core pulls hydraulic 2 (DS) / 4 (AS), screw diameter 80/60 mm, shot weight 1,800/250 g, operating hours 28,236, machine weight 30,000 kg, mould temperature control unit Oni Rhytemper FlexControl 30, 3x 8-way block modules 125 °C, 6-way block module 125 °C, visualization unit, take-out handling Engel Viper 20 (X, Y, Z, B axes), nozzle spacing 300 mm, year 2018, serial no. 221937, conveyor with enclosure, belt conveyor Engel BGR FB100 KMAT, year 2018, 2102958, L/W approx. 3,500 x 800 mm, external temperature control unit and material dosing not included in the scope of delivery. Ledpfx Aey I R Inenfshg

Stanje: rabljeno, Leto izdelave: 2018, Ser. št. 221903, krmiljenje, proizvajalec Engel, tip CC300, zapiralna sila 400 t, vgradna višina 450 - 950 mm, razmak plošč 1.450 mm, 8 kaskad, 24 vročih kanalov, hidravlični izvleki jedra 2 (DS) / 4 (AS), premer polža 60 mm, masa izstrelka 750 g, obratovalne ure 30.738, teža stroja 24.100 kg, temperiranje orodja, proizvajalec Oni, tip Rhytemper FlexControl 8, 2x 4-kratni blok moduli 125 °C, vizualizacijska enota, roka za izdelke, proizvajalec Engel, tip Viper 20 EP8, 5 osi (X, Y, Z, C, B-os), razdalja med šobami ni pomembna le pri 1-K, l. 2018, ser. št. 221917, ohišje za izdelke, transportni trak za izhod, proizvajalec Engel, tip FL4600 B600HLI, l. 2018, ser. št. 2101471, eksterno temperirno napravo in dozator materiala nista vključena v ponudbo. Lhodpfx Anoy I Rxmjfog

Stanje: rabljeno, Leto izdelave: 2023, obratovalne ure: 22 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61035145, vpenjalna sila: 1.200 kN, premer vijaka: 35 mm, delovna prostornina: 393 cm³, tlak vbrizgavanja: 2.429 letvica, injekcijska masa: 140 g, minimalna višina orodja: 200 mm, izmetalna sila: 33.000 N, hod izmetalca: 120 mm, odmični hod: 950 mm, vgradna višina: 450 mm, skupna dolžina: 5.650 mm, skupna širina: 1.820 mm, skupna višina: 1.950 mm, skupna masa: 6.700 kg, ogrevalna zmogljivost: 15,5 kW (21,07 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 570 mm, teža orodja: 600.000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The base injection molding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection molding, enabling you to respond quickly and innovatively to market requirements. It combines high performance, easy operation, and short delivery times. It can be used in a wide range of applications, for example in the packaging industry, electrical and electronics industry, medical technology, and the automotive industry. Your benefits: – Optimized price-performance ratio for a wide range of applications – High energy efficiency thanks to the all-electric machine concept – Realization of demanding delivery times thanks to the base machine concept with a wide range of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year 2013) CONTROL SYSTEM  MC P1 with 15" TFT color display with multitouch functions CLAMPING UNIT  Clamping force kN 1200  Maximum mold opening force kN 180  Tie bar spacing (h x v) mm 520 x 470  Mounting platen (h x v) mm 690 x 640  Mold height min. - max. mm 180 - 450  Maximum opening stroke mm 850  Maximum mold opening travel mm 450  Ejector drive electric  Ejector stroke mm 120  Ejector force forward/backward kN 27 / 33  Ejector speed forward/backward mm/s 300 / 300 Lhsdpfx Anjy Rmwdsfjg  Maximum mold weight kg 850 INJECTION UNIT  Screw diameter / type mm 35 / standard  Effective L/D ratio 22.9  Injection pressure bar 2429  Shot volume cm³ 154  Shot weight at max. stroke for PS g 140  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive / speed 1/min 374  Plasticizing rate (standard screw)4) g/s 18.9  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 22.7  Installed heating power kW 11.5  Power supply V / Hz 200 / 50 3-phase with neutral WEIGHT AND DIMENSIONS  Net weight with control cabinet t 6.7  Length x width x height m 5.18 x 1.76 x 1.90 ADDITIONAL EQUIPMENT  Wear-resistant plasticizing unit  BluePower full insulation for plasticizing cylinder  Open nozzle  Air valve 1-fold (BWAP)  Pneumatic control hot runner shut-off 1-fold  Electrical interface pneumatic cascade 4-fold  Euromap interface for handling E18 + E67  Euromap interface (central computer) E67, E77  Water manifold 4-fold  Electrical pre-equipment for hydraulic auxiliary unit  Automatic central lubrication  Adaptive Process Control (APC)  Injection-compression molding circuit  Graphic analysis package  Swivel device for injection unit The machine is located at our plant in Parsdorf and is available at short notice. Additional options can be offered upon request. We look forward to your inquiry.

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 1.609 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61008195, vpenjalna sila: 800 kN, premer vijaka: 40 mm, razmak između stupova: 420 mm, delovna prostornina: 201 cm³, tlak vbrizgavanja: 2.500 letvica, injekcijska masa: 183 g, minimalna višina orodja: 400 mm, izmetalna sila: 22.600 N, hod izmetalca: 150 mm, odmični hod: 750 mm, skupna dolžina: 3.960 mm, skupna širina: 1.480 mm, skupna višina: 2.020 mm, skupna masa: 3.550 kg, ogrevalna zmogljivost: 10,9 kW (14,82 KM), vrsta pogona: Hadraulisch, prosta razpetina: 470 mm, teža orodja: 1.000.000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The fully hydraulic CX series impresses with exceptionally compact, efficient, and flexible two-platen machines. The highly compact two-platen concept with a cantilevered clamping unit provides generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with the BluePower servo drive further establishes a powerful foundation to meet the highest demands and to provide the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G01 (Order 38648713) CONTROL SYSTEM - MC 6 with TFT color display and multitouch functionality CLAMPING UNIT - Clamping force: kN 800 - Max mold opening force: kN 55 - Tie bar clearance (h x v): mm 470 x 420 - Mounting plate size (h x v): mm 670 x 670 - Mold installation height min.-max.: mm - Maximum daylight opening: mm 750 - Max. mold opening stroke: mm 500 - Ejector drive: hydraulic - Ejector stroke: mm 150 - Ejector force forward/return: kN 23 / 10 - Ejector speed forward/return: mm/s 760 / 800 - Max. mold weight: kg 1000 INJECTION UNIT - Screw diameter / Type: mm 40 / Standard (other diameters available) - Effective L/D ratio: 20 - Injection pressure: bar 1860 - Stroke volume: cm³ 201 - Shot weight at max. stroke for PS: g 183 - Injection speed: mm/s 100 - Injection flow: cm³/s 126 - Screw drive/speed: rpm 295 - Plasticizing rate (standard): g/s 12.3 - Nozzle contact force: kN 50 ELECTRICAL PARAMETERS - Connected load: kW 15.0 - Installed heating capacity: kW 10.9 - Power supply: V/Hz 400 / 50, 3 phase with neutral WEIGHT AND DIMENSIONS - Net weight with control cabinet: t 3.55 - Length x width x height: m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - 1 additional temperature control zone for nozzle heating Lsdpfx Ajy Rlmwonfshg - Air valve, single (BWAP) - Pneumatic control for hot runner closure, single - Hydraulic core pull, single (BWAP) - Euromap interface for handling: E18, E63 - Euromap interface (central computer): E67, E77 - Adaptive Process Control (APC) - Injection-compression mode - Graphics analysis package The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered upon request. We look forward to your inquiry.

Stanje: rabljeno, Leto izdelave: 2012, obratovalne ure: 56.500 h, vpenjalna sila: 50 kN, delovna prostornina: 59 cm³, tlak vbrizgavanja: 2.500 letvica, skupna masa: 2.900 kg, premer polžastega transporterja: 25 mm, Dobavni pogoji: FCA Pegnitz Lsdpfx Aey N Eccenfjhg Dobavni rok: po dogovoru Plačilni pogoji: 100 % plačilo pred prevzemom stroja, čisti neto

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.000 kN, premer vijaka: 130 mm, izmetalna sila: 139.000 N, odmični hod: 1.030 mm, širina plošče: 1.500 mm, višina plošče: 1.620 mm, TECHNICAL DETAILS Clamping force: 8,000 kN Platen size (H x V): 1,620 x 1,500 mm Clear space between columns (H x V): 1,120 x 1,000 mm Mould height: 500 – 1,050 mm Maximum platen distance: 2,080 mm Opening stroke: 1,030 mm Ejector stroke: 350 mm Ejector force: 139 kN Mould weight: 7,200 kg Lhjdpfx Aney T Hz Ijfog Injection system Screw diameter: 130 mm Shot volume: 7,300 cm³ Shot weight (PS): 6,640 g Injection pressure: 1,300 bar Screw length: 20 L/D Electrical and hydraulic equipment Pump motor rating: 110 kW Heating capacity: 79 kW Oil tank capacity: 1,300 L MACHINE DETAILS Machine dimensions (L x W x H): 12.3 m x 2.7 m x 2.7 m Total weight: 33,500 / 9,700 kg