Stroji za brizganje - popolnoma električni

Engel Engel e-victory /740/400 (Hybrid) + easix KR10 Agilus, 2020

Stanje: rabljeno, Leto izdelave: 2020, obratovalne ure: 1.600 h, vpenjalna sila: 400 kN, delovna prostornina: 475 cm³, tlak vbrizgavanja: 1.650 letvica, skupna masa: 24.500 kg, premer polžastega transporterja: 55 mm, Dobavni pogoji: iz lokacije Dobavni rok: po dogovoru Plačilni pogoji: 100% pred prevzemom stroja, neto Lhjdpfx Afjv S H Rbs Sjl

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2016, Zapiralna sila: 110 t Premer polža: 22 mm Volumen vbrizga: 41 cm3 Razmerje L/D polža: 20 Izračunan delovni volumen: 41,8 cm3 Pravi vbrizgalni tlak: 2.864 bar Najv. vrtljaji polža: 500 min Polžni moment: 150 Nm Lhedpfx Afeu Eki So Sel Kontaktna sila šobe: 250/40 mm/kN Zunanji tok vbrizga: 76 cm3/s Grelna moč cilindra: 6,3 kW Število grelnih con: 4 Tip: Horizontalen Pogon: Električni

Stanje: dober (rabljeno), Leto izdelave: 2013, vpenjalna sila: 16.000 kN, Oprema: dokumentacija / priročnik, Zapiralna sila: 1600 t Premer vijaka: 135 mm Razdalja med stebri V: 1420 mm Razdalja med stebri H: 1870 mm Prostornina vbrizga: 9662 cm3 Tip: Horizontalen Pogon: Hidravlični Lodpfx Aoyh I Emof Sshl

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), Clamping force: 600 kN, weight: 9 t, operating hours: 3,638 h, equipped with ENGEL viper 20 handling robot. Lodpfxoh Nypfo Af Sshl

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, obratovalne ure: 8.000 h, vpenjalna sila: 500 kN, premer vijaka: 25 mm, injekcijska masa: 46 g, skupna višina: 1.779 mm, skupna masa: 4.200 kg, This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Included with the machine are a granulate dryer, an industrial robot, a conveyor belt, and temperature control units. Ideal for high-quality injection moulding processes. Please contact us for more information about this machine. Additional Equipment • Granulate dryer • Handling system • Conveyor belt – 1400 mm x 400 mm • Precision scale • Temperature control units – 2x HB-Therm Machine Advantages Technical Machine Advantages Ledpfex D Eccjx Af Sohl • Exceptional energy efficiency • Increased platen rigidity and mould safety • Fully electric direct drive • Ultra-precise direct drive motors with a response time of 0.1 ms • Displacement: 52 cm³ • Injection pressure: 2180 bar • Clamping platens: 520 x 570 mm Additional Information Control Unit Modern control system with NC5+ Automatic adjustment of mould height and clamping force Energy-saving routines Dimensions Machine depth: 4308 mm

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036721, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, razmak između stupova: 1.110 mm, delovna prostornina: 1.078 cm³, tlak vbrizgavanja: 1.877 letvica, injekcijska masa: 981 g, odmični hod: 3.200 mm, višina plošče: 1.540 mm, vrsta pogona: Hydraulisch, prosta razpetina: 3.200 mm, teža orodja: 2.200.000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX guide shoe, forces are optimally absorbed and the service life of your molds is increased. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM • MC 6 with 24" TFT color display featuring multitouch functions CLAMPING UNIT • Clamping force kN 6500 • Max. mold opening force kN 455 Lhsdpfxjw U N Ixe Af Sol • Clear width (h x v) mm 1110 x 960 • Mounting platen (h x v) mm 1540 x 1440 • Mold installation height, min. - max. mm 1550 (without center plate) • Max. opening stroke mm 3200 • Max. mold opening path mm 1650 • Max. mold weight kg 22000 INJECTION UNIT 1 SP2000 • Screw diameter/type mm 60 / Thermoplastic • Effective L/D ratio 23.3 • Injection pressure bar 2420 • Shot volume cm³ 792 • Shot weight at max. stroke for PS g 720 • Injection speed mm/s 140 • Injection flow cm³/s 396 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 72.2 • Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 • Screw diameter/type mm 70 / Thermoplastic • Effective L/D ratio 20 • Injection pressure bar 1877 • Shot volume cm³ 1078 • Shot weight at max. stroke for PS g 981 • Injection speed mm/s 140 • Injection flow cm³/s 539 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 98.3 • Nozzle contact force kN 82 ELECTRICAL PARAMETERS Connected load kW 341 • Power supply V/Hz 400/50 (3 phases with neutral conductor) WEIGHT AND DIMENSIONS • Net weight t 43.5 • Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT • Wear-resistant plasticizing unit • BluePower full insulation for plasticizing cylinder • Open nozzle • BluePower ServoDrive • Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) • Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) • Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) • Mold heating: 96-fold (3.5 kW) • Euromap interface for handling: E18 • Euromap interfaces (mainframe): E67, E77, E78, E63, E82.1 • Adaptive Process Control (APC+) • Graphic analysis package • Sliding table with turning unit, servo-driven • Vertical center plate • Parallel closing and opening pressing during the injection process with parallelism control between FWAP and center plate or BWAP and center plate • ColorForm interface: signal interface for integration of an RPM system • Electrical interface for HRS Flexflow system • Electrical interface and hydraulic valves for "1-K dummy operation" • Interface for connection of a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered on request. We look forward to your inquiry.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Zapiralna sila: 25 ton Razdalja med stebri: 270x270 mm Največja odprtina: 275 mm Višina orodja: 200 mm Velikost orodne plošče: 400 x 400 mm Ljdpfx Asvl Skgsf Sohl Premer polža: 18 mm Volumen vbrizga: 20 cm3 Masa brizga: 17 g Tlak vbrizga: 2500 bar Delovne ure: 38.035 h

Stanje: rabljeno, Leto izdelave: 2005, obratovalne ure: 70.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 4 kN, premer vijaka: 70 mm, Offer details: Stock No.: 14171 Manufacturer: Engel Machine type: ES 2050 - 400 HL Year of manufacture: 2005 Operating hours: 70,000 h Control system: CC200 Display language: German Location: D-52249 Eschweiler Clamping unit: Clamping force: 4,000 kN Platen size (h x v): 1,400 x 1,080 mm Minimum mold height: 350 mm Max. opening stroke: 1,300 mm Ejector stroke: 250 mm Ejector force (forward): 83 kN Injection unit: Screw diameter: 70 mm Injection pressure: 1,482 bar Stroke volume: 1,155 cm³ Ledpfxou Awals Af Sjhl Shot weight (PS): 1,040 g Injection rate: 419 cm³/s Screw speed: 183 rpm Nozzle contact force: 110 kN Electro-hydraulic equipment: Rated power, pump motor: 45 kW Dimensions and weights: Installation space approx.: 8.30 x 2.35 x 2.48 m Total weight: 31,200 kg Accessories: - Oscillation dampers - 2 x 24-circuit water manifold - Material hopper - Degassing screw Additional equipment: - Robot interface - 4 x hydraulic core pulls

Stanje: rabljeno, Leto izdelave: 1998, Automatic PET Bottle Blow Molding Machine Manufacturer: SIDEL Model: SBO 16/16 S1 Year of manufacture: 1998 Capacity: 16,000 bph for 1.5 L bottles and up to 19,000 bph for 0.5 L bottles Installed power: 347 kW Included in the set: - 1.5 L bottle molds - Preform feeder - Chiller unit Technical condition: The machine is used and was fully operational until disassembly. Currently, the machine is dismantled, packed in components, and prepared for transport. Lhodpeutni Rsfx Af Ssl Comes with comprehensive and original technical documentation.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2016, obratovalne ure: 390 h, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, skupna masa: 827 kg, Hladilna naprava Carrier Model: 30RBS-140B0181-ME, leto 2016, R410A, 135 kW (116.100 frig.), samo hlajenje, maksimalna poraba: 61 kW. Dimenzije: 2258x2050x1330 mm, ploščni izmenjevalnik, teža: 827 kg. Stroji so v celoti preizkušeni v našem skladišču, možno testiranje s plinom. Referenca: 1137 Lsdpoyfwuzjfx Af Sjhl