Casadei (Scm) Flexa 607 Xe nakup rabljenega (1.725)

Stanje: rabljeno, Leto izdelave: 2021, Numerical control MEGA 300 TS Panel height 60 mm PVC/ABS up to 3 mm Feed speed up to 22 m/min Electronically adjustable working height via CNC Motorized pressure belt with increased pressure Infeed system for small panels Panel support guide with electronic CNC adjustment Side roller conveyor with idle rollers for panel support Anti-adhesive unit Straightening unit with two electronically adjustable CNC motors Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA adhesive with glue tank and premelter Pressure roller group for straight profiles with electronically adjustable CNC pressure rollers Anti-adhesive group Nedst Hal Djpfx Altsld Milling unit with 2 motors and automatic tilt adjustment End trimming unit with 2 vertically stacked motors Trimming/corner rounding group with 2 tilting motors electronically adjustable via CNC Corner rounding unit with 4 motors Edge scraper unit electronically adjustable via CNC Glue scraper unit Oscillating brush unit Hot air dryer unit

Stanje: novo, Leto izdelave: 2025, Motorized thickness table adjustment with two speeds Digital display for working height Thickness table made of cast iron The thickness table is supported on four large trapezoidal-thread spindles for maximum stability and precision Four feed speeds Optionally available with two rollers in the thickness table Standard equipment includes noise protection and chip protection curtains at the infeed and outfeed sides Adjustable roller pressure Front infeed roller with helical gearing Outfeed roller with rubber coating High-performance industrial motor Equipment Details TERSA models with Tersa cutterblock Knife change in seconds When the machine starts, the knives are automatically tensioned by centrifugal force – self-locking The knife projection is set automatically without the need for setting jigs Work Table The work table is mounted on four large trapezoidal-thread spindles to ensure maximum stability under all operating conditions Standard equipment includes electric table adjustment Thanks to the special lifting device, the table position remains secure even without locking Helical-toothed steel infeed rollers ensure a constant and even wood feed Second, rubber-coated feed roller at outfeed Solid kickback devices prevent workpiece kickback A 4-knife cutterblock ensures optimal planing results Nodpsff Efaefx Altsld Dimensions and Weights Length approx. 1305 mm Width/Depth approx. 1080 mm Weight approx. 750 kg Dust Extraction Connection Extraction port diameter thicknesser: 150 mm Drive Power Main motor: 9 kW Installation Information Required space length: 1305 mm Required space width/depth: 1080 mm Required space height: 1197 mm Space requirement explanation: The dimensions consider maximum travel distances or usable lengths. Machine body length: 1305 mm Machine body width/depth: 725 mm Length: 1000 mm Width: 2000 mm Working area explanation: Please add the indicated measurements to the required space to obtain the recommended free installation area for the machine. Thicknesser Thickness table length: 630 mm Thickness table width: 1000 mm Minimum working height: 3.5 mm Maximum working height: 300 mm Minimum working length: 210 mm Maximum cutting depth: 8 mm Electrical Data Connection voltage: 400 V Phase(s): 3 phases Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 Speed: 4500 rpm Maximum planing width: 630 mm Feed Speed: 5/8/12/18 m/min Location: Ex stock 54634 Bitburg - available immediately -

Stanje: novo, Leto izdelave: 2025, Motorized thickness table adjustment with two speeds Digital display for working height Thickness table made of cast iron The thickness table is mounted on four large trapezoidal-thread spindles, ensuring maximum stability and precision Four feed speeds Optionally available with two rollers in the thickness table Standard noise and chip protection curtain at infeed and outfeed Adjustable roller pressure Front feed roller with helical toothing Outfeed roller with rubber coating Powerful industrial motor Equipment details TERSA models with Tersa cutterhead Knife changes in seconds When the machine starts, centrifugal force automatically tensions the knives—self-locking The knife projection is automatically set without using jigs Work table The work table is mounted on four large trapezoidal-thread spindles, guaranteeing maximum stability under all working conditions Standard with electric table adjustment Thanks to the special lifting system, the table position is reliably maintained even without locking Helically toothed steel feed rollers for constant and even wood feed Second, rubberized feed roller at outfeed Heavy-duty anti-kickback devices prevent workpiece kickback A 4-knife cutterhead ensures optimal planing results Dimensions & weights Length: approx. 1170 mm Width/depth: approx. 1003 mm Weight: approx. 660 kg Dust extraction connection Extraction port diameter (thickness): 150 mm Nljdped Hx E Ijfx Altsd Drive power Main motor: 7.5 kW Installation information Required length: 1170 mm Required width/depth: 1003 mm Required height: 1197 mm Note on required space: Dimensions account for maximum travel or working lengths. Machine body length: 1170 mm Machine body width/depth: 705 mm Length: 1000 mm Width: 2000 mm Note on working area: Please add the specified dimensions to the required space to obtain the recommended free installation area for the machine. Thicknessing Thickness table length: 520 mm Thickness table width: 1000 mm Min. working height: 3.5 mm Max. working height: 250 mm Min. working length: 210 mm Max. cutting depth: 8 mm Electrical data Connection voltage: 400 V Cutterhead Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 4500 rpm Max. planing width: 520 mm Feed Speed: 5/8/12/18 m/min

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, CASADEI F 25 LL FK – Spindle Moulder with Tilting Spindle and Table Extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced spindle moulder unit anchored to the worktable Especially sturdy design Smooth operation thanks to precision aggregates and high net weight Standard with forward/reverse spindle rotation and electronic interlock during direction change 5 speeds from 3000 - 10000 rpm Speed change is simple and convenient from the machine side Standard with MK 4 interchangeable spindle system Large cast iron worktable for permanent precision Easy handling due to controls and speed display on the front panel Fence with fine adjustment and aluminium fence jaws as standard Powerful industrial motors Equipment features: Spindle moulder fence Fence with crank/handwheel adjustment from the front With numeric display Interchangeable spindle MK 4 interchangeable spindle as standard on all CASADEI F 23 and F 25 models Optional sliding table Nsdodqzcxopfx Altold Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved guard for moulding operations Spindle rotation with forward/reverse switch MK 4 interchangeable spindle Fence with crank/handwheel adjustment from the front with numeric display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data: Worktable dimensions: 2500 x 810 mm Spindle tilt range: +45 to -45 degrees Usable spindle length for Ø 30-35 mm: 140 mm Usable spindle length for Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool Ø profiling: 250 mm Max. tenoning tool Ø: 350 mm Max. shaper tool Ø: 160 mm Max. lowerable tool Ø: 320 x 60 mm Speeds, 5-step: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction port Ø at fence: 1 x 120 mm Extraction port Ø under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, 5222454 LIBRA 45/2 RTC 135 Wide Belt Sander 5257433 “Z” Version for RTC 135 5257452 Vacuum table with electric fan 3kW 5257453 Oscillating belt air blow-off device for 5257454 Oscillating belt air blow-off device for 5257462 Reinforced motor 15 kW (20 HP) 5257485 Roller table at infeed and outfeed for 5257499 Grooved rubber pressure rollers, 2nd position 5257500 Grooved rubber pressure rollers, 3rd position Nlsdpfxoy Ehiwo Alted 5257504 Infinitely variable conveyor feed with inverter 5257605 Inspection door with window 5257606 LED lamp for internal lighting TECHNICAL DATA Dimensions and Weights Length (approx.) 1800 mm Width/Depth (approx.) 2000 mm Height (approx.) 2070 mm Extraction Connection Number of extraction ports: 2 Extraction port diameter: 200 mm Electrical Data Feed motor power: 0.8 kW Connection voltage: 400 V Line frequency: 50 Hz Height adjustment motor power: 0.25 kW Output power (main motor): 11 kW Sanding Unit Sanding belt length: 2150 mm Sanding belt width: 1370 mm Maximum sanding width: 1350 mm Feed Unit Feed speed: 4.5 / 9 m/min Workpiece Minimum workpiece height: 4 mm Maximum workpiece height: 170 mm Product Information EU 2023/2854 Type of data generated: Usage data Format of generated data: Common, machine-readable formats such as JSON Data volume: Up to 5 MB Continuous real-time data generation: Yes Data storage location: On the device and on a remote server Data access: On device and via physical as well as wireless interfaces Location: ex stock 54634 Bitburg - Available immediately -

Stanje: novo, Leto izdelave: 2026, Table Router SCM / CASADEI F 25 M LL FK Robust woodworking machine with spindle moulder tilting ±45° on both sides and MK4 interchangeable spindle Item number: 5220730 Brand: Holzkraft CASADEI - Heavy-duty steel and cast iron construction - Dynamically balanced spindle unit anchored to the worktable - Exceptionally robust design - Smooth running thanks to precision units and high machine weight - Standard with forward/reverse rotation and electronic interlock for direction change - Five speeds from 3,000 – 10,000 rpm - Speed change conveniently accessed from the machine side Nlsdpfxsy Ehcde Altod - MK 4 interchangeable spindle system as standard - Large cast iron worktable for lasting precision - Simple operation via controls and digital speed display on machine front - Large professional fence with fine adjustment and aluminium fence jaws, as standard - Fence adjustment via handwheel - Numeric display of spindle height setting, accurate to one-tenth of a millimetre - Powerful industrial motors TECHNICAL DATA Dimensions and Weights Weight (net): approx. 510 kg Dust Extraction Connection Number of extraction ports: 2 Extraction port diameter: 80 mm Number of fence extraction ports: 1 Fence extraction port diameter: 120 mm Worktable Worktable length: 2,500 mm Worktable width: 810 mm Table height: 923 mm Set-up Information Space requirements note: Dimensions account for maximum travel or usable lengths Work area length: 3,700 mm Work area width/depth: 5,000 mm Work area explanation: Please add stated figures to space requirements to calculate recommended free installation area for the machine Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Drive motor power: 7.0 kW Spindle Moulder Spindle tilt: -45° to +45° Spindle usable length: 140 / 180 mm Usable spindle length note: For spindle diameter Ø 30 – 35 mm / for spindle diameter Ø 40 – 50 mm Spindle stroke: 90 mm Interchangeable spindle: MK 4 Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm Maximum cutter diameters Max. lowerable cutter diameter: 320 x 60 mm Max. profiling cutter diameter: 250 mm Max. tenoning cutter diameter: 350 mm Max. moulding cutter diameter: 160 mm EQUIPMENT Equipment Spindle fence: Heavy-duty professional design with aluminium fence jaws and fine adjustment, frontside handwheel adjustment with digital numeric display Curved-cutting safety hood: ✔ Spindle height adjustment: motorized, with digital display Spindle tilt adjustment: motorized, with digital display Control: motorized adjustment for spindle height and tilt with digital display Control elements location: on machine body Table design: table extensions left and right and extendable workpiece support (total width 2,500 mm) Location: ex-stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Large surfacing tables made of grey cast iron The adjustment of the surfacing table is done via a precise parallelogram system, ensuring that the distance between the table ends and the cutter shaft remains constant in every position The large, stable fence made of anodized aluminum is easily adjustable and tiltable from 0° to 45° The fence tilt can be read from the operator's position Supplied as standard with auxiliary fence Large four-knife cutterhead, precision bearing Smooth operation due to precision unit and heavy cast construction Powerful industrial motor Maximum operator safety with utmost ease of use Chip removal display via scale Manual table adjustment Motor protection switch Equipment Details Including folding auxiliary fence for narrow workpieces Manual quick adjustment of chip removal with scale and clamping rotary knob Safety Guard The safety guard is foldable and designed to ensure operator protection without hindering the workflow TERSA Models with Tersa Cutterhead System No more adjustment or screwing Cutter knives change within seconds Self-locking Very low noise emission Perfect planing results Dimensions and Weights Length approx. 2750 mm Width/Depth approx. 1500 mm Weight approx. 680 kg Surfacing Total table length 2720 mm Infeed table length 1498 mm Max. chip removal 8 mm Fence length 1200 mm Fence height 190 mm Fence tilt range 90° - 45° Dust extraction connection Extraction port diameter 120 mm Drive Power Main motor 7 kW Installation Information Required length 2750 mm Required width/depth 1604 mm Space requirement explanation: Dimensions include maximum travel paths or usable lengths. Electrical Data Connection voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Cutterhead Type TERSA Diameter 120 mm Number of knives 4 pcs Nljdpfx Ajff Efcjltsd Speed 5000 rpm Max. planing width 520 mm Location: Ex-stock 54634 Bitburg - available immediately -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Compact wide belt sander with combination sanding unit Special features: - Activation and deactivation of the sanding pad from the control panel - Activation and deactivation of the roller from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning with push-button control Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipment includes grooved steel roller Ø 120 mm for calibration Precision adjustment of working height Clearly arranged control panel at the front Robust, pipe-reinforced monoblock steel frame, robot-welded, with working units mounted high for maximum rigidity Motorized height adjustment of the working table with digital display Electronically controlled sanding belt oscillation Feed conveyor with gear motor and two speeds Natural rubber feed belt with negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning for each unit with decimal correction for grit/thickness Universally usable for solid wood and veneer thanks to combination unit Entry-level model for small businesses Working width: 950 mm Equipment details Combination unit for calibration and sanding Grooved steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite backing Universal model for calibration and sanding work on solid wood, particleboard, and veneer Technical data Product length approx. 1388 mm | Product height approx. 1668 mm Product width/depth approx. 1545 mm Extraction connection Extraction nozzle diameter: 140 mm Electrical data Connection voltage: 400V | Current type: AC Phase(s): 3Ph | Mains frequency: 50Hz Feed motor power: 0.33 / 0.55 kW | Height adjustment motor: 0.25 kW Drive motor power: 7.5 kW Sanding unit Nljdpfx Alegf Sw Neted Sanding belt length: 1525 mm | Max. sanding width: 950 mm Sanding belt width: 970 mm Feed unit Feed speed: 4.5 / 9 m/min Workpiece Minimum workpiece height: 4 mm | Maximum workpiece height: 170 mm

Stanje: novo, Leto izdelave: 2026, CASADEI Libra 35 – Wide Belt Sander, Dual-Belt Version Immediately Available – Ex stock 54634 Bitburg Technical Data: Sanding width: 1100 mm Min. / max. working height: 4 / 170 mm Sanding belt width: 1115 mm Sanding belt length: 1900 mm Feed speeds: 4.5 / 9 m/min Feed motor: 0.33 / 0.55 kW Table height adjustment motor: 0.25 kW Drive motor power: 11 kW Electrical voltage: 400 V Phase(s): 3 Ph Mains frequency: 50 Hz Length: 1650 mm Width/depth: 1820 mm Height: 1960 mm Illustration with optional equipment. Wide belt sander in dual-belt configuration for up to 1100 mm working width, with numerous equipment options for cost-conscious craftsmen and workshops. Robust mono-block steel machine frame, reinforced with tubular supports and high-mounted working units for maximum rigidity User-friendly operation thanks to clearly arranged control panel at the front Motorized table height adjustment Digital display for working height Electronically controlled sanding belt oscillation with reduced compressed air demand Automatic star-delta start for main motor Natural rubber feed belt with negative profile Support table with two rollers at infeed and outfeed of the feed belt Feed belt drive via geared motor with two speeds Flexible steel pressure bar before the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning for each unit with fine adjustment capability for the grit/belt thickness Quality – Made in Europe Version RTC: 1st unit: diagonally grooved steel roller Ø 120 mm, with fine adjustment for calibration 2nd unit: combination unit with fine adjustable working height for calibration and fine sanding; rubber-coated roller Ø 120 mm (45 Shore), and hard sanding pad with graphite plate on replaceable insert Scope of delivery: Working table height adjustment with electronic display of working height Oscillation of sanding belts via electronic system Rubber-coated grooved pressure roller at infeed, 1st position, with anti-backflow device (C.E.) Star-delta starting of main motors Grooved calibration steel roller Selector switch for sanding pad positioning from control panel Optional accessories: Nlodpfx Alscr S Ecjtsd – Semi-hard flat sanding pad – Automatic belt centering system Location: Ex stock Bitburg – at a special price

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, številka stroja/vozila: AE/033731, Funkcionalnost: popolnoma funkcionalen, največja višina reza: 60 mm, premer žaginega lista: 300 mm, vrtljajska hitrost (min.): 4.650 obr/min, skupna masa: 3.006 kg, višina mize: 950 mm, Podatki o panelni žagi Glavne tehnične specifikacije avtomatske panelne žage AXO 200 podjetja Casadei Busellato so naslednje: Parameter Vrednost Dolžina reza 3800 mm Maksimalni izmet žage 60 mm Moč glavnega motorja 9 kW Moč motorja za podrezovanje 1,3 kW Število prijemnikov (standard) 6 Premer glavne žage 300 mm Premer žage za podrezovanje 160 mm Hitrost vrtenja glavne žage 4650 vrt/min Hitrost vrtenja žage za podrezovanje 5850 vrt/min Višina delovne mize 950 mm Tiskalnik za nalepke Zebra GK4 20T Stroj je namenjen rezanju naslednjih plošč: MDF, plošče iz lesnih vlaknenih plošč, lepenka, laminat, drugi materiali na osnovi lesa. Konstrukcijske značilnosti vključujejo trden jeklen okvir, avtomatski pomikalnik, ki ga nadzira numerično krmiljenje, mizo z zračnim blazinom, ki olajšuje premikanje plošč, in možnost nadgradnje z dodatnimi prijemniki ter optimizacijo rezanja. Žaga je v neprekinjeni uporabi 1/4 delovnega časa do konca oktobra 2026. Pomoč pri nakladanju žage. Nledpozkbhzefx Altod Razstavljanje za transport: 500 EUR. Nakladanje na tovornjak: 300 EUR.

Stanje: novo, Leto izdelave: 2024, Tip 205. Novo. Električno dviganje in spuščanje z digitalnim prikazom. Nagibna vretena do 45 stopinj. Velika mizarska miza z merilom in ustavljalcem. Pomik mize 1200 mm. Izmenljivo rezkalno vreteno. Opremljen z zgornjo vpenjalno glavo za čelne rezkarje. Stabilen rezkarski omejevalnik z fino nastavitvijo in števcem. Pripravljeno za podajalnike. Kakovostni stroj priznanega proizvajalca Casadei / SCM. Prilagodljiv stroj, ki zavzame malo prostora. Nledpeuh Sxkefx Altsd Organiziramo dostavo po vsej Evropi.

Stanje: zelo dobro (rabljeno), SCM Casadei C 41 C, univerzalni kombinirani stroj za obdelavo lesa z odvzemnikom prahu FT 200 Naprodaj je univerzalni kombinirani stroj za obdelavo lesa SCM Casadei C 41 C, izdelan leta 2016. Stroj je bil kupljen nov pri podjetju Hudek Zagreb d.o.o. in je bil uporabljen v proizvodnji. Je v popolnoma delujočem stanju, pregled in testiranje sta možna po predhodnem dogovoru na njegovi trenutni lokaciji v Antunovacu, Hrvaška. Stroj združuje več postopkov obdelave lesa v eni kompaktni enoti: Strigalno ravnanje Debelinski planer Žaganje Oblikovanje z vretenom Vrtanje in izdelava utorov Označevanje Uporaba drsnega stola Nodsznbyxjpfx Altjld Identifikacija stroja: Proizvajalec: SCM Industria S.p.A. Znamka: SCM Casadei Model: C 41 C Tip: C 41 Označba: Univerzalni kombinirani stroj za obdelavo lesa Leto izdelave: 2016 Različica z oznako CE Država izdelave: San Marino Teža stroja: 628 kg Strigalni in debelinski planer: Delovna širina: 410 mm Dolžina strigalnega planerskega stola: 1.800 mm Debelina obdelovancev: 3,5–230 mm Hitrost podajanja debelinskega planerskega stroja: 7 m/min Krožna žaga: Nagibna žaga: 90–45° Maksimalni premer žaginega lista: 315 mm Maksimalna višina reza: 100 mm Maksimalna širina reza na desni strani: 900 mm Enota za označevanje Drsni stol Drsni stol: Dolžina drsnega stola: 2.310 mm Oblikovalni stroj z vretenom: Hitrosti vretena: 3.500 / 7.500 / 10.000 vrt/min Premer vretena: 30 mm Uporabna višina vretena: 120 mm Enota za vrtanje in izdelavo utorov: Pomik stola: X 160 / Y 105 / Z 115 mm Vretenčna glava Wescott: 0–16 mm Električna in varnostna oprema: Trije motorji: 3 × 5,0 kW Napajalna napetost: 400 V, trifazna Frekvenca: 50 Hz Nazivni tok, prikazan na ploščici stroja: 10 A Zavore motorjev Gumb za izklop v sili Različica CE Priložena oprema: Priložen je odvzemnik prahu FT 200 z nazivno močjo 1,1 kW, vključno s fleksibilno cevjo za odsesavanje. Stanje in razpoložljivost: Stanje: rabljen in delujoč Predhodno uporabljen v proizvodnji Razpoložljivost: takoj Pregled in testiranje sta možna po predhodnem dogovoru Lokacija: Antunovac, blizu Osijeka, Hrvaška Cena: 7.500 EUR plus DDV Cena je pogajljiva za resnega kupca po ogledu stroja.

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Širina brušenja 1100 mm Min. ÷ maks. delovna višina 4÷170 mm Širina brusnega traku 1115/1370 mm Dolžina brusnega traku 2150 mm 2 hitrosti podajanja 4,5-9 m/min Podajalni motor 0,45/0,8 kW Moč motorja za nastavitev mize 0,25 kW Moč motorja (KM) za enoglave ali dvoglave stroje 11 kW (15) 50 Hz Nlsdjxwwgyspfx Altjd Delovni tlak 6 bar

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, številka stroja/vozila: AB00007338, Funkcionalnost: popolnoma funkcionalen, moč: 3,5 kW (4,76 KM), vhodni tok: 8 A, vhodna frekvenca: 50 Hz, višina obdelovanca (maks.): 84 mm, skupna masa: 177 kg, SCM Minimax E10 ročna oblepljivačica rubova proizvedena od strane SCM Group (Italija). Stroj je namijenjen za oblaganje rubova ravnih i zakrivljenih ploča koristeći ABS, PVC i melaminske trake za rubove. Idealan je za izradu namještaja po mjeri, recepcijskih pultova, šankova, zakrivljenih komponenti i za unutarnje montaže. Stroj je u vrlo dobrom stanju, potpuno ispravan i spreman za trenutni rad. Specifikacije: Proizvođač: SCM Group Model: Minimax E10 Godina: 2018. Napajanje: 400V / 3 faze Nodjy Uwq Njpfx Altjld Upravljanje nožnom pedalom Sustav zagrijanog lonca za ljepilo Valjak za nanošenje ljepila Pogodno za ravne i zakrivljene ploče Mobilna ruka za potporu trake za rubove Kompaktna industrijska konstrukcija Jednostavno rukovanje i podešavanje Tehnički podaci: Debljina trake: 0,4 – 3 mm Visina trake: 10 – 84 mm Debljina ploče: 8 – 80 mm Minimalni unutarnji radijus: cca. 25 mm Brzina pomaka: 4 / 8 m/min Instalirana snaga: cca. 3,5 kW Stroj je moguće pogledati i isprobati pod naponom.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Sliding table length: 3200 mm Cutting width at rip fence: 1350 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 200 mm Scorer: yes Saw blade height adjustment: motorized Saw blade tilt adjustment: motorized Rip fence adjustment: manual Saw blade angle display: digital Cutting height display: digital Rip fence display: scale Crosscut scale display: scale Saw blade diameter: 550 mm Speeds: 3000 / 4000 / 5000 rpm Motor power: 7.5 kW Nlsdpfx Aokuzd Heltod Motor brake: yes / automatic Extraction connection: 100 mm and 120 mm Machine length: 3600 mm Machine width: 2000 mm Weight: 1000 kg

Stanje: rabljeno, prevoženi kilometri: 1.001 km, prva registracija: 01/2009, barva: črn, voznikova kabina: drugo, vrsta prenosa: drugo, Leto izdelave: 2009, Oprema: žerjav, Vehicle location: Bovenden, Bucket width: 500 mm! Equipped with Kinshofer suspension and rotator. ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE. Subject to change, prior sale, and errors excepted! Nledpfx Aloi Rk S Sstjd

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Dolžina reza: 4300 mm Globina reza: 4300 mm Glavna rezalna enota Enota za predrez 1 fiksna prednja miza s zračnim curkom 3 premične prednje mize z zračnim curkom Potiskna konzola s približno 7 objemkami Programska oprema OSI Plus Njdpjznz Uisfx Altsld Teža približno 3277 kg. Na voljo v nekaj tednih.

Stanje: rabljeno, težka precizna formatna krožna žaga SCM SI 550 E Class Različica: tesarstvo - mizarstvo Dolžina reza: 3200 mm Širina reza: cca 1500 mm Glavni motor: 11 kW 3 hitrosti: 2500/3000/4200 o/min Kotni prislon z dolžinsko kompenzacijo Žagin list do Ø 550 mm Električno dvigovanje in nagibanje žaginega lista z digitalnimi prikazi Stroj iz upokojitve / prva dostava 2011 Stroj delavniško pregledan, v VRHUNSKEM STANJU Na zalogi v Liebochu Nlodpozi Sctofx Altod

Stanje: zelo dobro (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Delovno območje X: 4120 mm Delovno območje Y: 1750 mm Pomik obdelovanca po osi Z: 300 mm Elektrovreteno s 5 osmi, moč 13,5 kW Število vreten za vertikalno vrtanje: 13 Število vreten za horizontalno vrtanje X: 6 Število vreten za horizontalno vrtanje Y: 4 1 žaga za reže v smeri X Linearna menjava orodja s 16 položaji Krožna menjava orodja s 16 položaji Menjava orodja s sistemom za prevzem, položaj za žago Prevzem žage na skladišču z 1 položajem Delovna miza z 8 ležaji 1 vakuumska črpalka s pretokom 250 m3/h Njdpfx Alszncbdoteld Konzola z računalnikom PC Eye-M Pro Programska oprema: Maestro Active Daljinski upravljalnik TecPAD Transportni trak za odrezke Varnostni sistem PRO-SPACE Približna teža: 6695 kg.

Stanje: dober (rabljeno), C.E. Nlsdpfszn I Hfsx Altsd

Stanje: novo, Equipment: Height adjustment of the brush units via handwheel with numeric display Brush diameter 200 mm Machine in standard design, CE compliant Technical data: Working width: 600 mm Max. working height: 300 mm Extraction nozzle diameter: 2 x 140 mm Carpet feed motor power: 0.37 kW Feed speed variable: 3 - 20 m/min Brush unit motor power: 4.0 kW each (optionally 5.5 kW) Machine weight: approx. 750 kg Nsdodd Hi Ejpfx Alteld Further technical data: see brochure attached Including ACCESSORIES: - Steel brush, brass-coated, Ø 200 mm - TYNEX brush, Ø 200 mm Note regarding used machines: • Errors in technical data and prior sale reserved. • Stated prices are ex works – free loading! • The machines have been cleaned and functionally tested. • All machines are sold as inspected with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: novo, Clean air extraction / dust extractor Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA The fan is installed downstream of the filter Extraction motor energy efficiency class: IE3 Nominal airflow: 1,448 m³/h Nominal negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter of extraction inlet: 160 mm Filter surface area: 9.21 m² Residual dust content: < 0.1 mg/m³ Maximum sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg PM VERSION Automatic filter cleaning with pneumatic system, operating a wiper frame Njdpfxsr A Eq Rs Altold

Stanje: novo, Leto izdelave: 2023, Robust steel grey cast iron construction Milling spindle can be tilted backwards from 0° to -45° Forward and reverse rotation of the milling spindle Large-sized milling unit made of grey cast iron, mounted directly to the table Solid and precise cast iron table Standard swing-type milling guard Aluminium sliding table with ball contact system Torsion-resistant, highly precise, smooth-running, and reliable in daily operation 10-year SCM warranty against wear on the guideways Nlodpoiknp Rjfx Alted Milling spindle supported at the top with precision ball bearings for minimal bearing load and maximum service life Precise milling fence with rapid adjustment and fine adjustment with scale at the fence jaw Integrated extraction port Large milling table opening enables use of larger tooling Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Work table L x W = 1000 x 435 mm Table height 900 mm Sliding table length 1000 mm Sliding table width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle tilt 0° to -45° Usable spindle length 100 mm Maximum table overhang 130 mm Spindle speeds 3500/7000/10000 rpm Spindle diameter 30 mm Maximum retractable tool diameter 180 mm

Stanje: novo, Adjustment of infeed table using parallelogram system Chip removal display via graduated scale Simultaneous height adjustment and locking of work tables, complete with anti-tilt mechanism Quick conversion system for switching from surfacing to thickness planing (CE Version) Featuring a dedicated support for opening surfacing tables and an automatic pneumatic positioning system for the extraction hood, with hydraulic assistance "READY" electronic control includes: – Thickness table adjustment – Manual, semi-automatic, and automatic modes with 99 storable work programs – Additional functions: calculator and operating hours counter Automatic star-delta starting for main motor Machine table with height adjustment via 4 steel threaded spindles Rubber-coated outfeed feed roller Interchangeable feed rollers Segmented pressure shoes at infeed Cutter block and setting gauge for planer knives Micro-safety switches for correct positioning of surfacing tables and extraction hoods Surfacing guard (CE version) Automatic motor brake on main motor Thermal overload relay Emergency stop switch Lockable main switch CE declaration of conformity Technical data: Usable working width [mm]: 520 Total table length [mm]: 2310 Cutter block diameter [mm]: 120 Motor power [kW]: 9.0 Hz 50, 400 V Cutter block speed [rpm]: 5000 4 knives [mm]: 35 x 3 x 520 Aluminium surfacing fence [mm]: 1200 x 190 Surfacing fence tilting from 90° to -45° Nljdpfx Aed Akyzjltjd Min./max. planing height [mm]: 3 / 250 Feed speed for thicknessing [m/min]: 5-8-12-18 Extraction hood diameter surfacing [mm]: 120 Extraction hood diameter thickness [mm]: 120 Including options: - "TERSA" cutter block with disposable reversible knives - Tiltable auxiliary fence for thin workpieces

Stanje: novo, Digital version with motorized thickness table adjustment • Helical-toothed steel feed roller for constant and uniform material feed • Material feed with two speeds • Extra-long surfacing tables enable easy and precise planing of workpieces • Work tables are made of stress-relieved, annealed cast iron—durable, distortion-free, and highly resistant • Surfacing tables open to the rear simultaneously for minimal setup times • The high machine weight ensures maximum precision and smooth operation • Powerful industrial motor • Robust steel/cast iron construction • Chip removal from as little as 0.2 mm (with a minimum workpiece thickness of 3 mm) thanks to the helical-toothed feed roller—ideal for efficient planing of precious timber Technical Data: Working width 410 mm Cutterhead diameter (mm) 95 mm Nlsdpfx Asdvn Hwsltsd Max. chip removal 5 mm Total surfacing table length 2200 mm Thickness table dimensions 410 x 775 mm Thickness table feed speed 6/12 m/min Min./max. working height thickness table 3 – 240 mm Min. working length thickness 180 mm Motor power 5.0 kW, 400V, 50 Hz Including the following options: • Motorized thickness table adjustment with digital display • Fold-down auxiliary fence for thin workpieces • TERSA cutterhead system