Calende Schmiedepresse nakup rabljenega (134)

Leto izdelave: 2010, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Klieverik GTC81/1850SP FLOWLINE je zasnovan za učinkovito termosublimacijsko tiskanje posameznih kosov, omogoča pa tudi večkratno tiskanje na narezane liste in prenosni tisk iz role na rolo. Hsdpjzaq E Nofx Ag Aenu najv. širina materiala: 1650 mm hitrost: 0,1–2 m/s boben: 195 mm Maks. temperatura: 220°C Uporabljamo ga zelo malo, v zelo dobrem stanju.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HZQJ240620819, vrsta vhodnega toka: trifazni, skupna masa: 3.500 kg, vhodna napetost: 380 V, širina mize: 2.000 mm, premer valja: 470 mm, največja širina izdelka: 1.800 mm, delovna širina: 1.900 mm, Hongzhong sublimacijski kalander (rotacijski stroj za prenos toplote) Naprodaj: Profesionalni stroj za sublimacijski tisk / rotacijski stroj za prenos toplote podjetja Hongzhong Machinery. Zasnovan za težke industrijske obremenitve, ponuja visoko učinkovitost, zanesljivost in natančnost. Ključne lastnosti in prednosti: Sistem ogrevanja: Termični sistem ogrevanja bobna z oljem, ki zagotavlja enakomerno in stabilno porazdelitev temperature po celotni površini valja. Nadzor: Inteligentni vmesnik na dotik s programabilnim logičnim krmilnikom (PLC) (WEINVIEW) z večjezično podporo in alarmom za previsoko temperaturo. Funkcionalnost: Samodejno sledenje in poravnava valja/tkanine ter nadzor spremenljive hitrosti z inverterjem. Varnost: 4 stikala za izredno zaustavitev in samodejna funkcija ohlajanja s samodejnim izklopom, ko temperatura pade pod 80 °C. Uporaba: Idealen za tekstilno industrijo – podpira neprekinjen prenos materiala iz zvitka na zvitek in proizvodnjo kosov (izrezanih delov). Hnjdpfx Aoz Szc Hjg Asu Tehnične specifikacije in oprema: Napajanje: 3-fazno (380 V) Čas ogrevanja: približno 45 minut Oprema: Robustna delovna miza, sistemi za napenjanje zaščitne tkanine/papirja in sistem za prevzem/navijanje končnega materiala. Enostaven za upravljanje in vzdrževanje, zasnovan za dolgotrajno komercialno uporabo.

Leto izdelave: 2012, stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, KALANDRA, PRIMERNA ZA OBRAVNAVO NEPREKINJENIH TKANIN: • Tiskanje s prenosom. • Ponovna aktivacija direktnih barv. • Termofiksacija. • Ogrevani valj: 200 mm • Širina ogrevanega valja: 2000 mm Hnjdpfx Agjz Dh Tbj Aju • Širina delovnega območja: 1.850 mm • Skupna širina: 3300 mm • Skupna dolžina: 2300 mm • Skupna višina: 2100 mm

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2019, številka stroja/vozila: DF0195 - Rev.00, stiskalna sila: 40 t, C-Frame Press – Manufacturer Calende – 40 t C-Press – Table 750 × 720 mm For sale is a compact hydraulic single-column press (C-frame) from Calende, offering a pressing force of 40 t. This machine stands out for its high approach speeds, modern Siemens control system, and robust construction, making it ideally suited for assembly, straightening, and press-in operations. ===== Technical Data & Information: Single-Column Press Calende – 40 t C-Press ==== General Information - Manufacturer: Calende - Model: Single-Column Press - Design: C-frame press / Single-column press - Pressing force: 40 t - Machine weight: approx. 3.8 t - Dimensions (L × W × H): approx. 1,300 × 1,800 × 3,200 mm ==== Working Area - Passage width: 850 mm - Stroke: 500 mm - Max. working height: 700 mm - Table height: approx. 850 mm ==== Table & Ram - Table plate: 750 × 720 mm - Ram plate: 600 × 450 mm ==== Speeds - Approach speed: max. 140 mm/s - Pressing speed: 15 mm/s - Return speed: 140 mm/s ==== Hydraulics - Motor power: 12.7 kW - Return force: 4 t - Hydraulic tank volume: 160 l - Oil cooling: electric, 1.5 kW (max) ==== Control & Operation - Control system: Siemens S7-1200 - Monitor: WEG, 10" ===== Assembly operations, press-in operations, straightening operations, series production, workshop use, maintenance Hnedpfxsfhcc Ho Ag Aju Single-column press, C-press, hydraulic press, workshop press, press-in press, industrial press, die-spotting press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized quotation. Our hydraulic presses are manufactured in compliance with German machinery directives, European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with all aspects of the Brazilian national safety directive NR 12, which builds upon these standards. Our core strengths are special-purpose machine construction and press automation. We supply custom-built hydraulic presses at surprisingly competitive prices. For the hydraulics, we predominantly use components from leading European manufacturers.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2018, številka stroja/vozila: DF0150, stiskalna sila: 63 t, Single-column press – Manufacturer Calende – 63 t C-frame press – Table 750 × 600 mm For sale is a robust hydraulic single-column press (C-frame press) from Calende with a pressing force of 63 t. This machine provides high operating speeds, a modern Siemens control system, as well as compact design, making it ideal for assembly, straightening, and pressing applications in industrial use. ==== Technical Data + Information: Single-column press Calende – 63 t C-frame ==== General Information - Manufacturer: Calende - Model: Single-column press - Design: C-frame press / single-column press - Press force: 63 t - Machine weight: approx. 5.1 t - Dimensions (L × W × H): approx. 1,500 × 1,600 × 2,995 mm ==== Working Area - Throat width: 700 mm - Stroke: 500 mm - Max. working height: 700 mm - Table height: 850 mm ==== Table & Ram - Table plate: 750 × 600 mm - Ram plate: 600 × 540 mm ==== Speeds - Approach speed: max. 140 mm/s - Pressing speed: 15 mm/s ==== Hydraulics - Motor power: 11 kW - Return force: 6 t - Oil tank volume: 150 l ==== Electrical & Control - Control voltage: 24 V - Frequency: 50 Hz - Control system: Siemens S7-1200 - Monitor: Siemens, 12" ===== Assembly work, pressing operations, straightening tasks, series production, workshop applications, maintenance Hnodpfjfhcc Uox Ag Aou Single-column press, C-frame press, hydraulic press, workshop press, assembly press, industrial press, tool adjustment press, tryout press, tool try out press Are you looking for a hydraulic press tailored to your application? Contact us for a custom offer. Our hydraulic presses are manufactured in accordance with German machinery guidelines, as well as the European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the national Brazilian safety guideline NR 12, which builds upon these standards. Our core competency is special-purpose machinery and press automation. We offer bespoke hydraulic presses at surprisingly affordable prices. For the hydraulics of our presses, we primarily use components from leading European manufacturers.

Leto izdelave: 2003, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ta stroj, izdelan leta 2003, je zahvaljujoč pravilnemu vzdrževanju in negi še vedno v odličnem tehničnem stanju. Ponuja vsestransko konfiguracijo z delovno širino 1.900 mm. Linija je opremljena z naslednjimi elementi: • Postaje za odvijanje surovega materiala • J-oblika za nanašanje površinskega materiala • Naprava za razprševanje prahu • Infrardeča grelna postaja Hedpfx Aez E S H Isg Aenu • Glava za laminiranje • Hladilni sistem • Sistem za nadzor napetosti • Osrednja enota za navijanje Pomembna značilnost je dodatni zgornji pritiskalni valj, ki omogoča proizvodnjo 3-plastnih laminiranih kompozitov v enem samem postopku. Odvisno od uporabe lahko stroj zlepi plasti s termoplastičnim lepilom, ki se dobavlja v obliki zvitka, s termoplastičnim prahom ali s kombinacijo obeh.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2018, številka stroja/vozila: DF0151 - Rev.00, stiskalna sila: 110 t, Single-column Press – Manufacturer Calende – 110 t C-Frame Press – Table 800 × 700 mm A high-performance hydraulic single-column press (C-frame) from Calende with a pressing force of 110 t is offered for sale. The machine features high dynamics via proportional valve control, modern Siemens automation, as well as extensive adjustment options, making it ideal for demanding assembly, straightening, and press-fit applications. ==== Technical Data & Information: Single-column Press Calende – 110 t C-Frame Press ==== General Specifications - Manufacturer: Calende - Model: Single-column Press - Design: C-frame press / Single-column press - Pressing force: 110 t - Machine weight: approx. 5 t - Dimensions (L × W × H): approx. 1,950 × 1,510 × 3,145 mm ==== Working Area - Pass-through width: 800 mm - Stroke: 500 mm - Max. working height: 700 mm Hnjdpfodxrqwjx Ag Aeu - Table height: approx. 900 mm ==== Table & Ram - Table plate: 800 × 700 mm - Ram plate: 800 × 600 mm - Ram plate thickness: 6 inches ==== Speeds - Approach speed: 5 – 195 mm/s - Pressing speed: 1 – 15 mm/s - Return speed: 5 – 140 mm/s ==== Hydraulics - Motor power: 20 kW - Retraction force: 11 t - Cylinder diameter: Ø 200 mm - Oil tank capacity: 400 l - Proportional valve for speed control ==== Control & Operation - Control system: Siemens S7-1200 - Monitor: Siemens, 10" - Program memory: up to 200 programs - HMI pressure regulation: 20 – 110 t - Siemens remote access for maintenance ==== Safety & Equipment - Light curtain: Schmersal, 700 mm - Motor: IE3 energy efficiency (CE compliant) ===== Assembly, press-fit, and straightening operations, series production, tool manufacturing, industrial production, maintenance Single-column press, C-frame press, hydraulic press, workshop press, press-fit press, industrial press, die setting press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses surpass Canadian and European safety requirements, as they fully comply with all points of the national Brazilian safety standard NR 12, which is based on these regulations. Our core strength is special-purpose machine construction and press automation. We supply tailor-made hydraulic presses at surprisingly affordable prices. The hydraulic systems of our presses primarily utilize components from leading European manufacturers.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2018, stiskalna sila: 110 t, Tool Tryout Press – Manufacturer: Calende – 110 t Assembly Press For sale is a tool tryout press from Calende with a maximum pressing force of 110 tons. The machine features a bolster and ram size of 1,990 × 1,000 mm each, a maximum working height of 1,000 mm, and is especially suited for tool adjustment, assembly, and tryout work in tool and mould making. ==== Technical Data & Information: Tool Tryout Press Calende – Assembly Press ==== General Information - Manufacturer: Calende - Model: Tool Tryout Press - Design: Assembly Press / Tool Tryout Press - Pressing Force: 110 t - Machine Weight: approx. 11 t - Total Power Requirement: 15 kW - Dimensions (L × W × H): approx. 2,640 × 3,200 × 3,650 mm ==== Working Area - Pass-Through Width: 1,500 mm - Max. Working Height: 1,000 mm - Ram Stroke / Travel: 650 mm - Table Height Above Floor: approx. 800 mm ==== Table and Ram - Table Size: 1,990 × 1,000 mm Hnedpfsfhcc Tox Ag Aeu - Ram Size: 1,990 × 1,000 mm - Column Diameter: 120 mm ==== Forces - Return Force: 11 t ==== Speeds - Approach Speed: 10 mm/s - Pressing Speed: 10 mm/s ==== Hydraulics - Oil Tank: 200 l - Electric Oil Cooling: 1.5 kW ===== Tool tuning, tool tryouts, tool assembly, mould making, tool making, die set inspection, tryout operations Tool Tryout Press, Tryout Press, Tool Tuning Press, Tool Try Out Press, Assembly Press, Tryout Press, Tool Testing Press, Hydraulic Press Looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are built according to German Machinery Directive as well as the European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with all aspects of the Brazilian national safety standard NR 12, which is based upon these directives. Our key strengths are custom machine construction and press automation. We offer bespoke hydraulic presses at surprisingly competitive prices. The hydraulics of our presses are predominantly equipped with components from leading European manufacturers.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1972, Uporabljen, mehanično pogonjen, 3-valjni kalander, zgornji valj premera 140 mm, zgornji rezalni valj dimenzij 2000x5 mm. Pregledan, usklajen z veljavnimi predpisi in preizkušen s strani inženirja za varnost, pripravljen za pregled in testiranje v skladišču. Dimenzije: 3500*1000*1200 mm, višina 1200 mm, teža približno 1600 kg. Hnodpfx Agezh Dhxj Aju

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Valjarna Tröster, približno 5 kg, premer valja približno 200 mm, širina valja približno 370 mm. Hodpjz Rmzxsfx Ag Aonu Funkcionalnost je ohranjena, varnostne naprave ne ustrezajo najnovejšim standardom, vendar so še vedno funkcionalne. Razstavitev in prevzem izvede kupec.

Leto izdelave: 1977, stanje: dober (rabljeno), številka stroja/vozila: 12200, Premer valjev: 400 mm Dolžina valjev: 1000 mm Hedpjy Ui Uysfx Ag Ajnu Maksimalni pritisk med valji: 2x450 kN

Stanje: skoraj kot novo (rabljeno), Dalian XK-550 valjčni mlin, kompleten (krmiljenje, hidravlika, motor). V dobrem stanju, tovarniško sestavljen, takoj pripravljen za uporabo. Tip: Dalian XK-550 Širina valjev: 550 mm Izvedba: zaprt industrijski valjčni mlin Delovna dolžina: 1500 mm Hjdpfxsy Eyy Uo Ag Aonu Hitrost valjev: 18–30 m/min Prenosno razmerje: 1:1,27 Nastavitev razmika: hidravlična Maks. razmik: cca. 0,5–12 mm Kapaciteta: 2–6 t/h Moč: 110 kW Material: valji iz kaljenega litega železa

Leto izdelave: 2017, obratovalne ure: 1.752 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Kalander Monti Antonio 72-3600 + Ploter Mimaki JV5 320s Kalander Monti Antonio 72-3600 Kalander v zelo dobrem tehničnem stanju, redno mazana. Premer valja: 200 mm Širina materiala: 3.200 mm Potreben pritisk: 6-8 bar Hitrost: 0,1 - 1,7 m/min Maks. temperatura: 230 °C Maksimalna poraba: 19 kWh, povprečna poraba: 13 kWh Delovni čas: 1752 h Prevoženih: 58.104 m Hnsdpfst Rhmksx Ag Aou K kalandru pripada grafični ploter Mimaki JV5-320s: Stroj v zelo dobrem tehničnem stanju, vse šobe prehodne, redno čiščena. 07.07.2023 so bile zamenjane vse tiskalne glave z opremo: -glava DX5 – 4 kos -damperji – 32 kosov -captopy – 4 kosi -črpalke – 4 kosi -FPC trakovi – 4 kosi -gobice Od takrat natisnjeno približno 1000 m. Skupni izpis stroja: 13.543 m.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, barva: zelen, The calender consists of the following assemblies: - Roller assembly (4 rollers) - Roller drive assembly - Frame assemblies - Travel mechanism - Control cabinet The roller assembly comprises 4 rollers of different diameters. The rollers are mounted on a common frame, which allows for adjustment of their relative positions (changing the gap between rollers). The gap between rollers 1 and 2 is adjusted using adjustment screws driven by MRA-63 type worm gear reducers. The gap between rollers 2 and 3 is adjusted manually by turning adjustment screws. Each roller has an independent drive, allowing for adjustment of the rotational speed. Roller speed and sheet thickness settings are controlled from the operator panel in the calender’s control cabinet. Above the last roller (no. 4), a pressure roller and disc knives for trimming the sheet’s outer edges are installed. The distance between the knives is adjustable, allowing the production of sheets with various widths. Roller diameters: Hjdpfswcxufsx Ag Asnu - Roller 1: 515.00 mm - Roller 2: 315.00 mm - Roller 3: 315.00 mm - Roller 4: 355.00 mm - Roller 5: 95.00 mm - Disc knife 6: 200.00 mm - Roller width: 230 cm - Working width of rollers: 210 cm - Total width: 300 cm - Height: 250 cm - Calender-extruder gap: 70 cm - Length with approach: 350 cm Power supply: - 3 x 400 V (32A) - Motors: 4 x 0.75 kW - Fans: 2 x 0.25 kW - Pumps: 2 x 1.1 kW - Travel motors: 2 x 0.25 kW - Central pump: 1 x 0.5 kW - Roller pressure motors: 2 x 0.25 kW - Shear knife motors: 2 x 0.15 kW

Leto izdelave: 2019, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2019062, Rabljen (2019), v zelo dobrem stanju, termo kalander z filcom za tisk. Širina: 2000 mm. Zanesljiva italijanska kakovost. Idealno za sublimacijski tisk in obdelavo tekstila. Čist, ustrezno vzdrževan in popolnoma funkcionalen. LASTNOSTI TISKALNEGA VALJA: Hodezuy Rvopfx Ag Aonu Premer: 200 mm (7,87 palca). Širina: 2000 mm (78,74 palca). Delovna širina: 1800 mm (70,87 palca). TEHNIČNI PODATKI: Nameščena moč: 14 kW/h Povprečna poraba električne energije: 9 kW/h Tlak stisnjenega zraka: 3-8 bar Mehanska hitrost: 0,1 - 1,7 m/min Celotne dimenzije: širina 3110 mm (122,44 palca), dolžina 1250 mm (49,21 palca), višina 1650 mm (64,96 palca). Neto teža: 950 kg Stroj izdelan v skladu s pravili CE. NADZOR NAD NAPETOSTJO: Nadzor nad napetostjo tiskalnega materiala: Vhod: zavora z ročnim nastavljanjem in ročnim nastavljalnikom napetosti tekstila. Izhod: tangencialno navijanje na filc. Nadzor nad napetostjo tiskalnega papirja: Vhod: diskovna zavora s pnevmatskim nastavljanjem. Izhod: navijanje s pnevmatsko napravo. Nadzor nad napetostjo zaščitnega papirja: Vhod: diskovna zavora s pnevmatskim nastavljanjem. Izhod: tangencialno navijanje na filc. En sam motor. Filc NOMEX z ročnim sistemom za nastavljanje napetosti in avtomatsko napravo za centriranje filca. Vgrajen sistem za zaščito filca v primeru izpada električne energije in/ali pomanjkanja stisnjenega zraka.

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), številka stroja/vozila: M 5046 Typ 101 000 432, Embossing calender for roll-to-roll processing (100 m/min). Hedpfx Ajhr Rlysg Aenu Sheet material can also be processed; separate feeding tables are included. Exchangeable cassette (fine linen texture). The machine is in very good condition with low operating hours. Machine book / operating manual included.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, OMEC 4-Roller Mechanical Plate Rolling Machine. Available for immediate delivery unless previously sold. Model: FX4.90.1330. Dual Pre-Bending. Working width: 1330 mm. Top and bottom roller diameter: 90 mm. Side roller diameter: 95 mm. Max plate thickness: 2, 2.5, 3 mm. (1.5 x D, 3 x D, 5 x D) Top and bottom rollers powered with equal output. Motorized side rollers for up/down movement. Front opening top roller. Roller hardening HRC 55/60, hardness depth: 2 mm. Special bearings for side rollers. External lever for roller tilt adjustment. Sheet clamping with bearing-supported device. 2-pedal foot control. Electrical panel compliant with “CE” standards. Millimeter indicator for sheet clamping position. 4-ROLLER MECHANICAL PLATE ROLL with complete dual pre-bending and front release system. The top roller is fixed, while the upward and downward movements are assigned to the side rollers and the bottom roller. Sheet clamping is exceptionally straightforward: after the sheet is placed between the top and bottom rollers, raising the bottom roller securely clamps the sheet. Power: 1.8 kW Dimensions (mm): 800 x 2100 x H 1300 Weight: 625 kg Hnedpfx Agjfh Skpe Aou Machine is supplied complete with: - Conical bending device on the top roller. - 2 digital readouts for side roller positioning. - Roller grinding/turning after hardening treatment. - Hardened rollers.

Stanje: pripravljen za uporabo (rabljen), Sertom brand hydraulic plate rolling machine, length 25,000 mm with loading feed, 2 lower rolls of 300 mm, upper roll of 318 mm, plate thickness capacity 14 mm. 22 kW for rotation, 5.5 kW for movements, 2.5 kW for support structure. Dimensions: 600x190x210(h) cm. Weight: 15,500 kg. Hedpfxjnr Npyo Ag Aonu

Stanje: novo, Leto izdelave: 2018, številka stroja/vozila: DF0163, stiskalna sila: 800 t, Forging Press – Manufacturer Calende – 800 t Double Column Press – Table 1,300 × 1,100 mm For sale is a high-performance forging press from manufacturer Calende in double-column design with a pressing force of 800 t. The machine features a table area of 1,300 × 1,100 mm, high operating speeds, and a robust construction, making it ideal for demanding forming, forging, and pressing applications in industrial manufacturing. ==== Technical Data & Information: Calende Forging Press – 800 t Double Column Press ==== General Specifications - Manufacturer: Calende - Model: Forging Press - Design: Double Column Press - Press Force: 800 t - Machine Weight: Approx. 40 t - Dimensions (L × W × H): 4,100 × 3,500 × 6,650 mm ==== Working Area - Stroke: 500 mm - Installation Height: 1,000 mm - Ram Height: 800 mm - Table Height: Approx. 950 mm Hedpfjdxvfpex Ag Aonu ==== Table and Ram - Table Size: 1,300 × 1,100 mm - Ram Area: 1,300 × 1,100 mm - Max. Table Load: 5 t - Table Deflection: Max. 0.2 mm (as per DIN) ==== Forces - Return Force: 80 t - Ejector Force: 150 t ==== Speeds - Approach Speed: 250 mm/s - Return Speed: 150 mm/s - Working Speed: 10 mm/s - Ejector Speed: 70 mm/s ==== Hydraulics - Main Cylinder: 1 unit - Column Diameter: 250 mm - Total Power Requirement: 85 kW - Oil Tank Capacity: 1,000 l - Electric Oil Cooling ==== Ejector - Stroke: 200 mm ==== Equipment (partially optional / to be confirmed) - Hydraulic power unit mounted on top - Peripheral maintenance balcony - Side panelling - Front and rear light barriers - Side safety doors (800 × 530 mm) ==== Special Features - Thermal insulation of ram and table by 30 mm insulation plate ===== Forging, forming technology, hot forming, cold forming, metal forming, industrial manufacturing, heavy-duty applications Forging press, double column press, hydraulic press, forming press, metalworking press, industrial press, heavy duty press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they fully comply with the national Brazilian safety standard NR 12, which builds upon these regulations. Our key strengths are special-purpose machine construction and press automation. We supply customized hydraulic presses at surprisingly competitive prices. The hydraulics of our presses primarily feature components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2019, stiskalna sila: 110 t, Single-column press – Manufacturer Calende – 110 t Straightening Press – Table 800 × 700 mm For sale is a compact hydraulic single-column press (C-frame) from manufacturer Calende with a pressing force of 110 t. This machine impresses with its space-saving design, robust performance data, and versatile application possibilities, making it ideal for straightening, assembly, and pressing operations. ==== Technical Data + Information: Single-column Press Calende – 110 t Straightening Press ==== General Information - Manufacturer: Calende - Model: Single-column press - Design: C-frame press / Single-column press - Pressing force: 110 t - Machine weight: approx. 4.5 t - Dimensions (L × W × H): approx. 1,650 × 1,150 × 2,800 mm ==== Working Area - Stroke: 400 mm - Max. working height: 500 mm - Table height: approx. 900 mm ==== Table & Ram - Table plate: 800 × 700 mm - Ram plate: 600 × 500 mm - Table cut-out: 150 × 150 mm ==== Speeds - Approach speed: 10 mm/s - Pressing speed: 10 mm/s - Rapid traverse: 10 mm/s ==== Hydraulics Hjdpsfxygtjfx Ag Asnu - Total power requirement: 11 kW - Retraction force: 11 t - Oil tank capacity: 250 l ==== Controls & Options - Monitor: Siemens, 7" - Option: Siemens S7-1200 control - Option: Side panels - Option: Light curtains front and rear ===== Straightening work, Assembly work, Press-fitting work, Workshop applications, Maintenance Single-column press, C-frame press, Hydraulic press, Straightening press, Workshop press, Press-fitting press, Industrial press, Tool tryout press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they meet all requirements of the national Brazilian safety directive NR 12, which builds upon them. Our major strength is special-purpose machine construction and press automation. We supply custom-built hydraulic presses at surprisingly competitive prices. The hydraulics of our presses are predominantly equipped with components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0325, stiskalna sila: 40 t, Tryout Press – Manufacturer Calende – 40 t For sale is a tool tryout press from the manufacturer Calende with a maximum pressing force of 40 t. The machine features a bolster and ram plate each measuring 1,320 × 600 mm, a maximum working height of 700 mm, and is ideally suited for tool adjustment, assembly, and tryout work in tool and mold making. ==== Technical specifications & information: Hnjdpfxofxykwj Ag Aeu Tryout Press Calende – Tryout Press ==== General Information - Manufacturer: Calende - Model: Tryout Press - Design: Tool Tryout Press - Pressing force: 40 t - Machine weight: approx. 3.5 t - Dimensions (L × W × H): 2,065 × 700 × 2,905 mm ==== Working Area - Passage width: 1,000 mm - Max. working height: 700 mm - Stroke: 400 mm - Table height above floor: approx. 750 mm ==== Table and Ram - Bolster plate: 1,320 × 600 mm - Ram plate: 1,320 × 600 mm - Column diameter: 100 mm ==== Forces - Return force: 4 t ==== Speeds - Approach speed: 10 mm/s - Pressing speed: 10 mm/s - Rapid traverse speed: 10 mm/s - Return speed: 25 mm/s ==== Hydraulics - Motor output: 8 kW - Oil tank: 200 l - Electric oil cooling: 1.5 kW ==== Options - Hydraulics and tank mounted on top of the press: €2,400 - Surrounding maintenance platform: €3,600 - Siemens S7-1200 control: €4,600 - Floor tray made of painted steel: €850 ===== Tool adjustment, tryout work, tool assembly, mold making, tool making, press tool inspection, tryout operations Tryout press, tool tryout press, tool adjustment press, try-out press, press for tool testing, hydraulic press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized quote. Our hydraulic presses are built in compliance with German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety standard NR 12, which is based on these regulations. Our core competence lies in special-purpose machine construction and press automation. We offer custom-built hydraulic presses at surprisingly affordable prices. For the presses' hydraulics, we predominantly use components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0319, stiskalna sila: 125 t, Tool Tryout Press – Manufacturer Calende – 125 t Assembly Press For sale is a tool tryout press from Calende with a maximum pressing force of 125 t. The machine is equipped with both a bolster and a ram plate measuring 1,300 × 600 mm, offers a maximum working height of 700 mm, and is particularly suitable for tool tuning, assembly, and tryout tasks in tool and mould making. ==== Technical Data + Information: Tool Tryout Press Calende – Assembly Press ==== General Information - Manufacturer: Calende - Model: Tool Tryout Press - Design: Assembly Press / Tool Tryout Press - Pressing force: 125 t - Machine weight: approx. 6 t - Dimensions (L × W × H): 2,540 × 933 × 3,000 mm ==== Working Area - Throat width: 1,000 mm - Stroke: 500 mm - Max. working height: 700 mm - Table height above floor: approx. 850 mm ==== Table and Ram - Bolster plate: 1,300 × 600 mm - Ram plate: 1,300 × 600 mm - Column diameter: 120 mm ==== Forces - Return force: 12 t ==== Speeds - Advance speed: 10 mm/s - Pressing speed: 10 mm/s - Rapid forward speed: 10 mm/s - Return speed: 25 mm/s ==== Hydraulics - Motor power: 11 kW - Oil tank: 250 l - Electric oil cooling: 1.5 kW Hnjdsfxykpopfx Ag Aju ===== Tool tuning, tool tryout, tool assembly, mould making, toolmaking, press tool testing, tryout work Tool tryout press, tryout press, tool tuning press, tool try out press, assembly press, tryout press, tool testing press, hydraulic press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses surpass Canadian and European safety requirements, as they comply in all aspects with the Brazilian NR 12 safety directive, which is based on these standards. Our core strength lies in special purpose machinery and press automation. We supply custom hydraulic presses at surprisingly competitive prices. The hydraulic systems of our presses are equipped primarily with components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0369, stiskalna sila: 220 t, Straightening Press – Manufacturer Calende – 220 t Double-Column Press – Table 2,000 × 600 mm For sale is a high-performance straightening press by Calende in double-column design with a pressing force of 220 t. The machine features a large working width of 1,500 mm, a robust construction, and state-of-the-art control technology, making it ideal for straightening, bending, and forming operations in industrial production environments. ==== Technical Data & Information: Straightening Press Calende – 220 t Double-Column Press ==== General Information - Manufacturer: Calende - Model: Straightening Press - Design: Double-column press - Pressing force: 220 t - Machine weight: approx. 5.2 t - Dimensions (L × W × H): approx. 4,000 × 1,950 × 2,900 mm ==== Working Area - Pass-through width: 1,500 mm - Stroke: 400 mm - Max. working height: 500 mm - Table height: approx. 900 mm Hnsdpefxyivofx Ag Aeu ==== Table and Ram - Table size: 2,000 × 600 mm - Ram plate: 2,000 × 400 mm ==== Forces - Return force: 20 t ==== Speeds - Approach speed: up to 10 mm/s - Working speed: 10 mm/s - Return speed: 25 mm/s - Rapid traverse: 10 mm/s ==== Hydraulics - Total power requirement: 30 kW - Oil tank volume: 500 l - Electric oil cooling: max. 1.5 kW ==== Control and Measurement Technology - Travel measurement system: Turck or Balluff - Control system: Siemens S7-1500 or Pilz PSS 4000 - Monitor: Siemens or Omron ===== Straightening, bending, forming technology, metalworking, maintenance, series production, component correction Straightening press, double-column press, hydraulic press, press brake, forming press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in accordance with German machinery guidelines, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with all aspects of the Brazilian national safety standard NR 12, which builds upon these standards. Our great strength lies in custom machine engineering and press automation. We offer tailor-made hydraulic presses at surprisingly affordable prices. For the hydraulics systems, we mainly use components from leading European manufacturers.

Leto izdelave: 2017, stanje: zelo dobro (rabljeno), Linija za laminiranje s plamenom, delovna širina 2.000 mm, leto izdelave 2017. Oprema je v zelo dobrem stanju in je bila uporabljena le občasno. Predvsem se je uporabljala za enoslojno laminiranje PVC folije s tanko PU peno za embalažno industrijo. Linija je izdelana na varjeni jekleni konstrukciji in dobavljena v predhodno sestavljenih modulih. Vključuje laminacijsko enoto s plamenom s tremi vodno hlajenimi, natančnimi kalandrirnimi valji s prevleko iz trdega kroma. Osrednji valj je fiksiran; dva zunanja valja sta motorizirana in nastavljiva po položaju. Širina laminacijske reže je nastavljiva do 50 mm, z natančnostjo pozicioniranja ±0,1 mm. Nastavitve se nadzorujejo in prikazujejo na HMI (človeško-strojni vmesnik). Gorilna sekcija ima dva standardna gorilnika tipa 40 z vodnim hlajenjem, zamenljive nosilce šob, pnevmatsko pozicioniranje in izpušne nape. Plinska kontrolna postaja s sistemom za mešanje plina in zraka je zasnovana za utekočinjeni naftni plin (UNP); intenzivnost plamena se električno nastavlja in prikazuje na HMI. Oprema za podajanje in obdelavo materiala vključuje valje za razprostiranje in usmerjanje preje, sinhronizirane gumijaste valje za vnos materiala, odvijalnik podložnega materiala s pnevmatskim dvigom valja in odvijalnik pene za valje do premera 2.400 mm. Vključen je varilni stroj za penaste folije tipa FSE 2000/20. Akumulator tekstila TA L ima kapaciteto približno 100–200 m (odvisno od materiala), največjo delovno širino 2.000 mm, mizo iz nerjavečega jekla, odvijalnik valja in napravo za polaganje materiala. Hnjdpfxsz E S Hhs Ag Aou Linija ima avtomatski sistem za usmerjanje robov penastega materiala GR3 z optoelektronskim senzorjem in električno gnanim usmerjevalnim okvirjem; nastavljiv odmik roba 5–20 mm. Enota za obrezovanje robov BTB 01 ima dva električno gnana rotacijska noža, nastavljivo širino reza in varnostne zaščite. Podaljšane gredi nožev so na voljo kot dodatna možnost; naprava za razrez v sredini je vključena v obseg dobave. Za transport končnih izdelkov skrbijo sinhronizirani valji za odvijanje, vključno s pnevmatskim tlačnim valjem. Osrednji odvijalnik ima ročno nastavljivo napetost, z avtomatsko kompenzacijo glede na premer navijanja; smer navijanja je izbirljiva. Merilno kolo registrira dolžino izdelka. Nadzorni sistem PLC zagotavlja elektronsko sinhronizacijo glavnega in pomožnega pogona; pomožne hitrosti so nastavljive za ±10 % glede na glavni pogon in prikazane na HMI. Izpust materiala pod podom je na voljo kot dodatna možnost. Tehnični podatki: • Leto: 2017 • Največja delovna širina: 2.000 mm • Širina kalandrirnega valja: 2.200 mm • Hitrost proizvodnje: do 60 m/min, spremenljiva • Električni priključek: 400/230 V, 50 Hz, trifazni + nevtralni • Priključna moč: pribl. 14 kW • Hladilna voda: pribl. 2,5 m³/h; priključki 1" • Stisnjen zrak: 6 bar • Gorivo: UNP; 60–100 mbar; poraba do pribl. 12 kg/h, odvisno od nastavitve gorilnika • Višina navijanja: 1.100 mm • Teža: pribl. 6.000 kg • Prostor za namestitev: pribl. 17 × 4 m Lahko uredimo transport do vaše tovarne, namestitev in usposabljanje operaterjev. Za podrobno ponudbo nas kontaktirajte.

Stanje: rabljeno, Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, največja širina izdelka: 1.400 mm, Prodaja se oprema za navijanje valjev, lepljenje, tiskanje in zlaganje. Hodpfx Agsz Rn A Rs Ajnu -Dve tiskalni enoti s sistemom razpršilne plošče, -Kalander Cassoli s sistemom za vtiskovanje vzorcev. -Naprava za laminiranje folij, oprema za zlaganje s sistemom za ustvarjanje trikotnih zložkov. -Stroj za pakiranje zvitih izdelkov, širina do 1400 mm. -Stroj za pakiranje Hugo Beck za zložene izdelke je prav tako na voljo za prodajo. Dodatne podrobnosti si lahko ogledate na slikah.