Buchholz Of375 nakup rabljenega (35)

Stanje: rabljeno, Hydraulic power unit, hydraulic pump, hydraulic motor - Hydraulic power unit sourced from a Jungheinrich electric forklift - 2 drive units - Filter - Control valve - Hydraulic tank: 930/400/H360 mm - Dimensions: 1000/400/H800 mm Godpfeb Uht Ajx Ahmjbn - Weight: 288 kg

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Technical condition: very good, tested. This means the devices are calibrated, perform 100% complete measurements, and are regularly heated up at least once a month for 12 hours. It is possible to perform an on-site transformer oil test – naturally, the sample will be pre-checked to allow for comparative results, as seen in the photos. Gbedpfx Aszcmblehmon The MYRKOS chromatograph performs Dissolved Gas Analysis (DGA) in electrical insulating oils. It allows the detection of incipient faults in power transformers and other equipment containing insulating oil (reactors, instrument transformers). It also enables analysis of gases extracted from Buchholz relays! The MYRKOS chromatograph is extremely precise, compact, and provides comprehensive detection of key fault gas concentrations for oil condition assessment. A calibration gas standard (gas cylinder) ensures traceability with concentration reference standards. Prior to each analysis, the instrument is calibrated and a functional check is carried out. A specialized shake syringe (included) ensures correct volume ratios. An excellent solution for oil laboratories at power utilities and research institutes serving the power industry. The PPMReport software, including a Polish language version, is included. Built-in diagnostic tools: Duval Triangle and Rogers Ratios. Used by utilities, grid operators, and laboratories supporting the power and industrial sectors. The field version is equipped with a special pressurized carrier gas container (helium, purity 99.999%). Supplied with shake syringes for preparing a gas extraction pad, as well as syringes for calibration and air tests. TECHNICAL PARAMETERS: Number of detectable gases: 9 (Hydrogen H2, Methane CH4, Ethane C2H6, Ethylene C2H4, Acetylene C2H2, Carbon Monoxide CO, Carbon Dioxide CO2, Oxygen O2, Nitrogen N2) Measurement range for gas concentrations in oil: - H2: 5–60,000 ppm - Other gases: 1–60,000 ppm - O2: 60–100,000 ppm - N2: 500–100,000 ppm TECHNICAL DESCRIPTION: Gas chromatograph for Dissolved Gas Analysis (DGA) in insulating oils, suitable for both field and laboratory applications. The laboratory version comes with a shaker. The MYRKOS chromatograph analyzes concentrations of gases dissolved in insulating oil (DGA), enabling the detection of developing faults in power transformers or other apparatus containing insulating oil (such as reactors or instrument transformers). It also facilitates analysis of gas extracted from Buchholz relays. The MYRKOS is highly accurate, compact, and ensures full coverage for relevant fault gas concentrations needed for oil assessment. Condition: very good. We have two identical, fully operational units available. If two units are purchased, the price for one will be 50% lower. We recommend inspecting and testing the instrument on site before purchase (testing is possible). Last test performed: 21.11.2025, compared with another Myrkos unit (verification conducted in a certified laboratory). Available for inspection in Rzeszów.

Stanje: rabljeno, Leto izdelave: 1978, 10 MVA oil transformer, TuR Dresden, 30 / 10.5 kV with on-load tap changer (19 steps), vector group YNyn0, equipped with expansion vessel, Buchholz relay, air dryer, cooling fans, dial thermometer, year of manufacture 1978. Gbsdpfx Aet Akl Hjhmon

Stanje: rabljeno, Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, 3150 kVA oljni transformator, 20500V – 5 stopenj/6600V, z ekspanzijsko posodo, Buchholz rele, kazalčni termometer, Dyn5, letnik 1985, proizvajalec Asea Lepper, tip DOHH Gbedpsw In Htjfx Ahmon

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, delovna širina: 400 mm, vrsta pogona: Direktgetriebe, premer lijaka: 400 mm, nazivna moč: 7,5 kW (10,20 KM), število rezil: 33, največja hitrost vrtenja: 150 obr/min, premer rotorja: 300 mm, širina rotorja: 400 mm, perforacija sita: 6 mm, Neposreden pogon preko motorja z menjalnikom Brez nastavljanja zaradi posebnih rotor nožev Enostaven dostop za vzdrževanje in čiščenje Nizka raven hrupa in malo prahu pri mletju zaradi počasnega vrtenja rotorja Univerzalna uporaba v kombinaciji s številnimi opcijami Premer rotorja (mm): 300 Širina rotorja (mm): 400 Hitrost vrtenja rotorja (min-1): 150 Pogon (kW): 7,5 Gbodpfx Ahon Hqxfomjn Število rotor nožev: 33 Število stator nožev: 2 Velikost odprtin na situ (mm): > 6 Teža pribl. (kg): 550

Leto izdelave: 2026, stanje: novo, Slow-running beside-the-press granulator Rotor diameter (mm): 180 Rotor width (mm): 180 Rotor speed (rpm): 150 Drive (kW): 3 Number of rotor knives: 18 Number of stator knives: 2 Screen perforation (mm): >5 Weight approx. (kg): 140 The slow-running beside-the-press granulators of the GSL series are primarily used in injection moulding and blow moulding for inline size reduction of sprues and defective parts. With various hopper and extraction systems available, these machines can be flexibly integrated into existing installations. GSL 180 For granulating sprues from injection moulding and blow moulding processes Highlights of the GSL series: - Low noise operation due to the rotor’s low speed, inclined cut, and a multi-layer, sound-insulated hopper in sandwich construction - Powerful and efficient drive thanks to branded gear units - Easy maintenance, cleaning, and knife change The slow-running beside-the-press granulators of the GSL 180 series feature a closed rotor with a diameter of 180 mm. The machines are available in working widths from 120 mm up to 430 mm. The rotor consists of individual discs directly connected to the spur gear via an oversized drive shaft, ensuring efficient and low-maintenance power transmission. Gjdpfx Asqmik Iehmjbn The material to be granulated can be fed manually, via conveyor belt, or by robot through the generously sized, sound-insulated hopper with sandwich construction. As standard, the granulator is mounted on a low base frame with swivel castors. Discharge is via a suction pan mounted under the screen, with a pipe connection for a suction conveyor. Applications The slow-running beside-the-press granulators of the GSL 180 series are specifically designed for granulating sprues generated in injection moulding and blow moulding applications. The easy accessibility of the machine allows for quick colour and material changes. The low rotor speed also enables the processing of both soft and hard materials, guaranteeing high-quality material output with minimal dust.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, premer rotorja: 250 mm, širina rotorja: 450 mm, Optimization of an established concept. Shredding of large-volume blow molded parts as well as start and end pieces Godpfet Aagaox Ahmsbn In a compact redesign, the best features of the proven GST and GSC series have been integrated, with particular emphasis on weight, handling, and energy efficiency. These compact granulators are equipped with full sound insulation, resulting in extremely quiet operation. The granulators are available with a 250 mm rotor diameter and widths of 300, 450, and 600 mm. The curved back wall of the cutting chamber ensures aggressive material intake and prevents material jams. As with all ZERMA granulators, the rotor and stator knives can be adjusted outside the machine, reducing downtime during maintenance. The strongly tangential, curved back wall of the cutting chamber, combined with the aggressive open rotor design, ensures reliable material intake and minimizes the risk of blockages. These compact granulators are suitable for use in blow molding operations. They are ideal for recycling large-volume items such as bottles, canisters, and crates. Thanks to the low feed height, the machines can be easily loaded by hand or with a small conveyor. The low noise emissions and minimal footprint make this granulator the perfect solution for inline size reduction. 98T8Mrx Optional back wall with raised stator knife, M version: The feed method with a higher stator knife is better suited for thicker walled and more compact parts, such as injection molded components, profiles, and sheets. The cutting geometry and reduced aggressiveness of the rotor produce high-quality regrind regardless of material type or shape, such as injection molded parts, profiles, sheets, etc. Control system and switch cabinet: The integrated control system and operator panel not only meet all current safety regulations, but can also be customized to specific requirements. In addition, peripheral devices such as feed conveyors, metal detection, and discharge systems can be seamlessly integrated into the machine’s control system. For enhanced efficiency, there is also an optional intelligent energy saving function available, which reduces power consumption during idle times and can automatically start and stop the system based on the status of upstream equipment. Standard configuration with blower, power consumption 0.37 kW and 400 cyclone Rotor diameter (mm): 250 Rotor width (mm): 450 Drive power (kW): 7.5 Number of rotor knives: 3 x 2 Number of stator knives: 2 Screen perforation (mm): > 6 Weight approx. (kg): 700 Feed opening (mm): 380 x 450 Feed opening option for M version (mm): 295 x 450

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: TH GST 4060 2411 001, skupna masa: 1.650 kg, premer rotorja: 400 mm, število rezil: 6, širina rotorja: 600 mm, moč: 22 kW (29,91 KM), The compact inline granulators of the GST series are designed for use in injection molding and blow molding operations. They are suitable for recycling, for example, voluminous parts such as bottles, canisters, crates, sprues, and injection-molded components. Due to the low feeding height, the machines can be easily loaded by hand or with a small conveyor belt. Low noise emissions and a small footprint make the GST series the perfect solution for inline size reduction. All GST series machines feature a compact, soundproofed machine frame and a noise-insulated feed hopper. The feed hopper can be opened and closed using a gas strut. The compact granulators are available with two rotor diameters (250 mm, 400 mm) and rotor widths ranging from 300 to 1000 mm. Smaller units feature an open F-rotor, while larger machines are equipped with the heavier S-rotor. The curved rear wall of the cutting chamber ensures aggressive material intake and prevents material blockages. Thanks to the modular design, the granulator can be easily extended with additional options such as replaceable wear plates. As with all ZERMA granulators, rotor and stator knives can be adjusted outside the machine to minimize downtime during maintenance. A setting jig is included in delivery. The control cabinet is firmly mounted to the outside of the sound enclosure, and all wiring is routed internally. Technical data: - Rotor diameter (mm): 400 - Rotor width (mm): 600 - Drive (kW): 22 - Rotor knives (rows): 3 x 2 - Stator knives (rows): 2 - Screen perforation (mm): > 8 Gbodpsy Dgpmofx Ahmsn - Cutting chamber (mm x mm): 400 x 600 - Weight (approx. kg): 2000

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Slow-speed beside-the-press granulator Rotor diameter (mm): 180 Rotor width (mm): 300 Rotor speed (rpm): 150 Drive power (kW): 4 Number of rotor knives: 30 Number of stator knives: 2 Screen perforation (mm): >5 Gsdpfxsyzrfue Ahmobn Weight approx. (kg): 180 The slow-speed beside-the-press granulators of the GSL 180 series feature a rotor diameter of 180 mm and working widths ranging from 120 to 430 mm. The rotor is directly driven by a gear motor. The low rotor speed ensures a pleasant noise level and optimal regrind quality. The special rotor knives can be resharpened multiple times, eliminating the need for complex adjustment work. The granulators are loaded via a noise-reducing sandwich-design feed hopper. Depending on the application, the machines can be equipped with different hopper variants. Optional low and high base frames are available. The regrind is extracted accordingly or collected in bags or a plastic container. Easy and quick maintenance is ensured via the Quick Snap quick-release system, which allows optimal accessibility.

Stanje: novo, številka stroja/vozila: G-CL-270-FN-EC-EX, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, volumenski pretok: 270 m³/h, raven hrupa: 61 dB, skupna višina: 755 mm, skupna dolžina: 400 mm, skupna širina: 500 mm, skupna masa: 60 kg, ISI G-CLEANER - ATEX Mechanical Air Filter Unit (without inlet plate / to be specified separately) Gsdpovrykhjfx Ahmjbn Model: 270 FN Design: Mobile Control: None ATEX: "e" II 3 G Zone 2 Horizontal, mobile mechanical air cleaner with EC radial fan for the extraction of gases in EX zones. TECHNICAL DESCRIPTION: Airflow Rate: - 320 m³/h (free blowing) - 240-270 m³/h (effective) (depends on installed filters, without extraction elements) Air Intake: Exhaust sound box at rear (optionally 1x100mm / 2x80mm / 4x50mm) Filter Configuration: - Coarse filter made from aluminium mesh - Z-line filter F9 - Activated carbon cassette with specially impregnated pressed granular carbon ATEX: Group II Gas/Dust Fan: according to ATEX II 2G Exh IIB T4 Gb Temperature class: T4 > 135°C Fan: Equipment category 2 Filter system: Equipment category 3 All electrical components supplied in explosion-proof design. Colour: RAL 7035 light grey (optional: special colour) Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Airflow: non-adjustable Noise level: 61 dB(A) Dimensions: Length 400 mm / Width 500 mm / Height 755 mm Weight: 60 kg

Stanje: novo, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, volumenski pretok: 1,6 m³/h, skupna višina: 20.000 mm, skupna dolžina: 5.500 mm, skupna širina: 6.600 mm, skupna masa: 130 kg, Oprema: Na voljo je tipska ploščica,

Stanje: novo, številka stroja/vozila: S-CL-100-FN-EC, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, volumenski pretok: 134 m³/h, skupna višina: 475 mm, skupna dolžina: 250 mm, skupna širina: 250 mm, skupna masa: 17 kg, Oprema: Na voljo je tipska ploščica, ISI S-CLEANER Mechanical Air Filtration Unit (Solder Fume Extraction) For up to 1 workstation Type: 100 FN Design: Semi-mobile (glide skids / no castors) Control: none Horizontally oriented, semi-mobile mechanical air purifier with EC radial fan for extracting soldering fumes. TECHNICAL SPECIFICATION: Airflow: - 134 m³/h (air volume) - 100 m³/h (effective air output) (depending on filter configuration, without extraction elements) Inlet connection: NW 50 mm (rear) Filter configuration: - Pre-filter - HEPA filter H13 - Activated carbon cassette (refillable) Gjdewpu Twjpfx Ahmebn Colour: RAL 7035 light grey Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-efficient EC technology Airflow: not adjustable Dimensions: Length 250 mm / Width 250 mm / Height 475 mm Weight: 16.5 kg

Stanje: novo, številka stroja/vozila: G-CL-350-FR-EC, vhodna napetost: 230 V, volumenski pretok: 350 m³/h, raven hrupa: 61 dB, skupna višina: 600 mm, skupna dolžina: 430 mm, skupna širina: 340 mm, skupna masa: 40 kg, ISI G-CLEANER Mechanical Air Filtration Unit Model: 350 FR Version: Mobile Control: Without Horizontal, mobile mechanical air cleaner with EC radial fan for the separation of gaseous substances. TECHNICAL DESCRIPTION: Airflow: - 390 m³/h (free blowing) - 350 m³/h (effective) (depends on filter assembly, without capture elements) Air inlet: Rear, top, with 4 connections, 50 mm each Filter configuration: - Pre-filter mat F5 - HEPA filter H13 according to DIN EN 1822-1 - Activated carbon cassette with 9 kg of specially impregnated, compressed shaped carbon Colour: RAL 7035 light grey (optional: special colours available) Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-efficient EC technology Airflow: adjustable Noise level: 61 dB (A) Dimensions: Length 430 mm / Width 340 mm / Height 600 mm Weight: 40 kg Gbodpfxsvrygpe Ahmsn

Stanje: novo, številka stroja/vozila: D-CL-440-FR-EC, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, volumenski pretok: 450 m³/h, raven hrupa: 58 dB, skupna višina: 1.430 mm, skupna dolžina: 450 mm, skupna širina: 550 mm, skupna masa: 50 kg, Oprema: Na voljo je tipska ploščica, vrtilna hitrost brezstopenjsko nastavljiva, ISI D-CLEANER Mechanical Air Filtration Unit (Dust) Model: 440 FR Version: Mobile Control: None Horizontal, mobile mechanical air cleaner with EC radial fan for dust extraction. TECHNICAL DESCRIPTION: Airflow: - 450 m³/h (free-blowing) (depends on installed filter media, without capture elements) Air inlet: Baffle plate as pre-separator Intake nozzle: 100 mm (left side) Filter configuration: - Filter cartridge (dust class M according to DIN EN 60335-2-69 Annex AA) - Cartridge cleaning via compressed air rotating nozzle Colour: RAL 7035 light grey (optional: custom colour) Gbjdpfx Ahevrxc Aemon Voltage: 230 V Frequency: 50 Hz Protection rating: IP54 Fan technology: energy-efficient EC technology Airflow: adjustable Noise level: 58 dB(A) Dimensions: Length 450 mm / Width 550 mm / Height 1430 mm Weight: 50 kg

Stanje: novo, številka stroja/vozila: S-CL-250-FN-EC, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, volumenski pretok: 250 m³/h, skupna višina: 600 mm, skupna dolžina: 340 mm, skupna širina: 430 mm, skupna masa: 35 kg, Oprema: Na voljo je tipska ploščica, ISI S-CLEANER Mechanical Air Filtration Unit (Solder Fume) for up to 2 workstations Type: 250 FN Version: Mobile Control: none Horizontal, mobile mechanical air purifier with EC radial fan for the filtration of solder fume. TECHNICAL DESCRIPTION: Airflow: - 240 m³/h (nominal airflow) - 170 m³/h (effective air output) (depends on filter configuration, without extraction hoods) Suction ports: 2 x NW 50 mm (rear) Filter configuration: - Prefilter G4 - HEPA filter H13 - Activated carbon cassette (2.5 kg, refillable) Colour: RAL 7035 light grey (custom colour on request) Gjdpfx Ahjvrylfomobn Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Airflow output: not adjustable Dimensions: Length 340 mm / Width 430 mm / Height 600 mm Weight: 35 kg

Stanje: novo, številka stroja/vozila: C-CL-360-FR-EC, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, volumenski pretok: 390 m³/h, raven hrupa: 58 dB, skupna višina: 1.190 mm, skupna dolžina: 900 mm, skupna širina: 550 mm, trajanje garancije: 12 meseci, Oprema: Na voljo je tipska ploščica, ISI C-CLEANER Mechanical Air Filter Unit Model: 360 FR Design: Mobile Control: None Gbedpfxovrw T Hj Ahmsn Horizontal, mobile mechanical air purifier equipped with an EC radial fan for the extraction of gases and particulates. TECHNICAL DESCRIPTION: Airflow: - 390 m³/h (free blowing) - 360 m³/h (effective) (depends on filter configuration, without extraction arms) Air Inlet: with impact plate as pre-separator Filter Configuration: - Filter cartridge made of polyester fleece (Dust Class M) - Pre-filter mat G4 - HEPA filter H13 - Refillable activated carbon cassette, capacity: 3 kg To maintain consistent suction performance, the filter cartridge can be cleaned at regular intervals using compressed air via a ball valve. Colour: RAL 7035 light grey (special colours upon request) Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan Technology: Energy-efficient EC technology Air flow rate: variable Noise level: 58 dB(A) Dimensions: Length 900 mm / Width 550 mm / Height 1190 mm

Stanje: rabljeno, Leto izdelave: 2012, No. 3268 Cutting and Processing Center Schirmer BAZ 1000-G6 / VU "Basic" Used, year of manufacture 2012 Comprising: - Cutting and Processing Center Schirmer BAZ 1000-G6 / VU "Basic" - Steel Cutting Automatic Saw Schirmer SZA 450 - Buffer Screwing Station Schirmer - Bar Processing Center Schirmer SBZ I Cutting and Processing Center Schirmer BAZ 1000-G6 / VU "Basic" - Cutting length 300 – 3900 mm - Automatic feed magazine for 9 profiles up to max. 6500 mm length - Automatic transfer station - Feed device for PVC profiles up to 6500 mm length with NC-controlled gripping clamp, positioning speed up to 150 m/min - Profile length measuring device incl. optimization software - Automatically adjustable profile guides - Processing station designed as a G-Module "Ultra Speed" Processing operations on PVC profiles: - Drainage and ventilation slots/holes in frame, sash, and transom profiles, handle hole drilling for front doors, striker plate markings, lock case milling - Height measuring device to detect profile tolerances - Gasket cutting device - VU saw unit with twin saw aggregates 2x 45° - Standard saw unit with 1 saw aggregate, swiveling range +45° to -45° - Conveyor belt for waste disposal - NC-controlled gripping clamp for bar outfeed, positioning speed up to 180 m/min - PC machine control: 7-slot ATX industrial PC, Microsoft Win XP Prof., software: TwinCAT NCI - Horizontal circulating buffer for transferring profiles to the steel insertion station and screwing station for steel insertion station with 8 insertion slots - Monitor for steel length display - Automatic label printer Steel Cutting Automatic Saw Schirmer SZA 450 - Automatic feed magazine, max. profile length 6000 mm, profile width 25 – 50 mm, profile height 15 – 60 mm, wall thickness max. 4 mm - Feed device - Standard saw unit for 90° cuts - Automatic bar outfeed - Belt conveyor - Discharge device Gedpfxsy Nnnnj Ahmobn - Steel remnant processing - Steel length measurement in the steel loading magazine Buffer Screwing Station Schirmer - Feed device for PVC profiles up to 3900 mm in length - Automatically adjustable profile guides - Screw station - Steel insertion fingers for reinforcement profiles up to 200 mm insertion depth Bar Processing Center Schirmer SBZ I - Feed device for PVC profiles up to 3900 mm in length - Automatically adjustable profile guides - Probe for automatic determination of zero point at the profile start - Drilling station with 4-axis CNC control, 2 axes vertical, 1 axis horizontal, 1 axis X-feed - NC-controlled gripping clamp for bar outfeed - Special version belt conveyor for transverse discharge - Lock part visualization software including monitor - Screw station with screw feeding - Helmet rail with balancer for bar screw unit - Bar screw unit with automatic screw feeding System performance: Approx. 120 window units 1400 x 1500 mm / 8 hours If the machine is upgraded with an additional screw unit at the buffer screwing station, the output increases to approx. 160 units / 8 hours Sale on behalf of customer, ex location near 30625 Hannover, without dismantling, without transport and assembly To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. For used machines, any warranty is excluded; sold as seen.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, obratovalne ure: 7.006 h, delovna prostornina: 7.960 cm³, vrtilni moment: 1.403 Nm, nazivna moč: 180 kW (244,73 KM), TEHNIČNI PODATKI Prostornina motorja: 7,96 l Nazivna moč: 180 kW (245 KM) pri 1.800 vrt./min Največji navor: 1.403 Nm pri 1.150 vrt./min PODATKI O STROJU Obratovalne ure: pribl. 7.006 h OPREMA Avtomatski samospojni diferencial na obeh oseh Mokre lamelne zavore na obeh oseh Elektronski nadzor oprijema za zahtevne terenske pogoje Kombiniran inch-zavorni sistem Gjdpfxsyarufj Ahmobn Hlajenje po potrebi Brezstopenjski pogon XPower od 0 do 40 km/h Brezobrabna delovna zavora z

Stanje: rabljeno, Leto izdelave: 1979, 31,5 MVA energetski transformator, 110 kV / 10,5 kV s preklopnikom stopenj (19 stopenj), z ekspanzijsko posodo, Buchholz relejem, sušilcem zraka, vezalna skupina Yy0, na voljo dokumentacija o transformatorju. Gjdpfjrk Nrtsx Ahmjbn

Leto izdelave: 1990, stanje: generalkompletno obnovljen (rabljeno), Our top seller! Extremely dynamic short-circuit strength, making it excellently suited for tough industrial use with frequent switching operations, high electrical loads, and harmonic content. Robust tank construction. Reduced losses (Po/Pk between B-A' and A-C'). Available with Elastimold external cone plug-in bushings; of course, also available with porcelain bushings on the HV/LV side. The transformer is always equipped with a dial thermometer featuring 2 contacts and a drag pointer, and optionally with DGPT2 comprehensive transformer protection. Godpfx Ae A Nbvehmjbn Expansion tank version with 2-float Buchholz relay available. Production batches of up to 35 units possible. 12 months warranty.

Stanje: novo, Extraction capacity of filter unit at connection*: 2,600 m³/h (free intake) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz, 3Ph+PE Noise level*: 66 dB(A) Dimensions L/W/H in mm: L 1160 / W 508 / H 545 Colour: RAL 7035 Weight: 111 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter configuration Special voltage or special colour available on request OPTIONAL: With pre-filter package Gbodpfxopkwauo Ahmsn Application: Extraction of oil mist, emulsion mist (in emulsions with higher oil content), and smoke, for small to very large machine workspaces | Oil mist separator Your benefits from the ELBARON series: - 18 device variants available - Directly from the manufacturer - ISI-TRONIC optional (digital filter control) - Electronically controlled EC fan as standard - Adjustable speed and air output - Available as simplex (single-stage) or duplex (two-stage) - Various air performances available - Adaptable to pollutant load and air performance needs - Wide range of installation and connection accessories - Quality made in Germany We developed the ELBARON® filter series for use in pure oil machining applications and for the separation of oil mist and smoke (oil mist separator). For many years, the digital electrostatic air filters of the ELBARON® series have counted among the most powerful filter units on the market and are in use worldwide. Our filter units are already optionally digitized and can, for example, be controlled via laptop. The ELBARON® device series comprises 18 device variants and can be optimally configured in size and performance for your application. ELBARON® units impress with long service lives and absolute operational reliability. Our electrostatic filter cells are dimensioned to achieve the best possible filtration efficiencies, service lives, and trouble-free operation from an economic perspective.

Leto izdelave: 2021, stanje: novo, Air filter for indoor air purification of aerosols such as viruses, bacteria, pollen, and dust ISI AIR CLEANER – adjustable up to 1600 m³/h – 230 V – suitable for large rooms up to 160 m³ Airflow rate: adjustable up to 1600 m³/h Room size: suitable for up to 160 m³ Power consumption: 69 – 209 W Operating voltage: 230V 50/60Hz, 5m power cable with Schuko plug (EU4) (plug & play) Noise level*: 38.2 – 48.1 db(A at 1 m) Dimensions L/W/H in mm: L 550 / W 660 / H 2000 Colour: Base: RAL 7016, Upper part: RAL 7035 Weight: 130 kg Manufacturer: ISI Industrieprodukte GmbH Scope of delivery: 1 pc. ISI AIRCLEANER FT1 1 pc. Fine dust filter, ISO 16080 ePM1-90% 1 pc. HEPA Filter H14, EN1822 Delivery condition: ex works Buchholz (Westerwald), packaging only, immediately available Gbodjh Rfcnspfx Ahmon Application: Currently, air purifiers have gained recognition mainly due to the coronavirus pandemic. In general, air purifiers are recommended even outside of a pandemic, as they can significantly improve air quality. Even after the pandemic, seasonal pathogens such as influenza circulate during the colder months. Asthmatics and allergy sufferers benefit year-round from the filtration of pollen and other allergens provided by an air purifier. Functionality: The indoor air is drawn in at the underside of the filter unit. In the pre-filter section, dust and larger particles are removed from the air. A subsequent, highly effective HEPA H14 filter system eliminates 99.995% of particles and aerosols—which may contain pathogens—from the air. Your advantages: - High-efficiency EC fan as standard - Variable speed and airflow adjustment - Long service life and simple filter replacement - Low noise level - Separation efficiency up to 99.95% - Quality Made in Germany

Leto izdelave: 2021, stanje: novo, ebmpapst EC radial module, backward-curved, single inlet, with spider mounting bracket Type: K3G250-PR04-H2 Motor: M3G084-DF ePhase: 1~ Rated voltage: 230 VAC Voltage range: 200 - 277 VAC Frequency: 50/60 Hz Data specification type: ml Gbodpfxji D Ei As Ahmon Speed: 3080 rpm Power input: 500 W Current consumption: 2.3 A Min. ambient temperature: -25°C Max. ambient temperature: 40°C The fans are brand new and in original packaging, 18 pieces per pallet, production year 10/2021. Several pallets available. Including packaging ex works 53567 Buchholz (Westerwald), Germany. We are happy to arrange freight. Please inquire about shipping costs, specifying the destination location.

Stanje: novo, Leto izdelave: 2023, Extraction capacity at nozzle* (filter unit): 2600 m³/h (free blowing) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz, 3Ph+PE Noise level*: 65 dB(A) Gbsdpfx Aoh Rdxnohmjn Dimensions (L/W/H in mm): L 9755 / W 508 / H 545 Colour: RAL 7035 Weight: 90 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter configuration Special voltage or special colour available on request OPTIONAL: With pre-filter package Field of application: Extraction of oil mist, emulsion mist (for emulsions with higher oil content) and smoke, suitable for small to very large machine workspaces | Oil mist separator Your advantages with the ELBARON series: - 18 device variants available - Direct from the manufacturer - ISI-TRONIC (digital filter control) optional - Electronically controlled EC fan as standard - Adjustable speed and air flow - Available as simplex (single-stage) or duplex (two-stage) - Wide range of air flow capacities available - Adaptable to pollutant load and required air flow - Extensive range of installation and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining processes involving pure oil and for separating oil mist and smoke (oil mist separator). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already optionally digitalised and can, for example, be controlled via laptop. The ELBARON® range comprises 18 device variants and can be perfectly tailored in size and capacity to your specific application. ELBARON® units impress with long service life and absolute operational reliability. Our electrostatic filter cells are dimensioned to ensure, from an economic perspective, optimum filtration efficiencies, long service lives, and trouble-free operation.

Stanje: novo, Extraction capacity (filter unit at nozzle*): 980 m³/h Total power consumption*: 0.71 kW Operating voltage: 400 V, 50/60 Hz, 3Ph+PE Noise level*: 68 dB(A) Dimensions L/W/H in mm: L 1290 / W 345 / H 595 Colour: RAL 7035 Weight: 79 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter configuration Special voltages or colours available on request Gedpfx Aeh Rfbqohmjbn Application: Separation of emulsion mist, suitable for medium to very large machine workspaces. Your benefits with the COBARON series: - 15 device variants available - Direct from the manufacturer - ISI-TRONIC standard (digital filter control system) - Electronically controlled EC fan as standard - Adjustable speed and air volume - Available with various filter configurations - High-quality filter media for pre-filter and main filter stages - Separation efficiencies up to 99.95% - Extensive range of mounting and connection accessories - Flexible adaptation to your application - Optimised service life - Quality Made in Germany With COBARON, we offer a filtration system that accommodates today’s wide range of machining processes and their respective contaminant profiles. Even within the standard range, the COBARON combination filter system offers various filter configurations and thus can be variably adapted to numerous applications. The different expansion stages of the COBARON series have been specifically developed for applications that are borderline cases for many filter systems (mechanical or electrostatic). Combining both proven filter principles in the appropriate application increases the effectiveness of air filtration and extends service intervals. COBARON can be operated as a purely mechanical filter device with various filter stages, or additionally configured with an electrostatic filter cell. Our filter units already come standard with digitalisation features and, for example, can be controlled via laptop.