Bn Laser Gmbh & Co. Kg Jewelliner Bn120Xt-Ha-X nakup rabljenega (117.424)

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: BN120XT-HA-X,

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, pritisk: 6 letvica, trajanje garancije: 60 meseci, notranja širina: 5.000 mm, notranja dolžina: 15.000 mm, notranja višina: 5.000 mm, filtrirna površina: 352 m², volumenski pretok: 22 m³/h, Oprema: dokumentacija / priročnik, osvetlitev, Blast house *up to 5 years warranty* for all blasting media, constructed from a steel frame/insulated panels, with filtration system, recirculating air system, abrasive recycling, 200l pressure blasting pot with automatic refilling, blast hose with dead-man control, breathing air system, LED lighting, wall cladding with 70 shore 4mm fabric-reinforced rubber, sweeping pit with bucket elevator. Abrasive return via sweeping pit with bucket elevator, optionally upgradable to cross screw conveyor with metering hood spanning the full width as a sweeping pit or as a complete flat conveyor floor. Iaedju Hy Tpjpfx Aa Uer Workpiece transport upgradeable: blast trolley with rail track, crane system, roof crane opening, etc. For glass bead blasting of stainless steel, upgradeable with appropriate magnetic drawer or electrically driven magnetic drum separator. For blasting with two different blasting media (ferrous and mineral), upgradeable with magnetic drum separator, final demagnetization stage, and second air sifter for media separation and cleaning. Safety features: emergency lighting with battery backup, emergency stop switches inside the cabin and outside, inspection window to blast chamber, gate/door end switches, dead-man control, pressure vessel quick venting. Warranty up to 5 years on selected components. 50 years of experience and more than 3,000 systems built in blast room engineering.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, pritisk: 6 letvica, trajanje garancije: 60 meseci, notranja širina: 4.000 mm, notranja dolžina: 6.000 mm, notranja višina: 3.000 mm, filtrirna površina: 99 m², volumenski pretok: 7 m³/h, Oprema: dokumentacija / priročnik, osvetlitev, Blast room for all types of abrasive media, constructed from steel with insulated panels, including filtration system, recirculating air system, abrasive media preparation, 200L automatic refill pressure blast pot, blast hose with deadman control, breathing air system, LED lighting, wall lining made of 70 Shore 4mm reinforced rubber sheet, sweep pit with bucket elevator. Abrasive media recovery via sweep pit with bucket elevator, upgradable to cross screw conveyor with dosing hood across the full width as a sweep pit or as a complete flat conveyor floor. Workpiece transport is retrofittable: blast trolley with rail bed, crane system, roof crane opening, etc. For glass bead blasting of stainless steel, upgradable with a suitable magnetic drawer or electrically driven magnetic drum separator. Iodpfou A A Tkex Aa Uoar For blasting with two different types of abrasive media (ferritic and mineral), upgradable with magnetic drum separator, final demagnetization stage, and a second air classifier for separation and cleaning of the abrasive media. Safety equipment: Emergency lighting with battery backup, emergency stop switches inside the cabin and externally, viewing window into the blast chamber, gate/door limit switches, deadman control, pressure vessel quick venting. Warranty of up to 5 years on various components. 50 years of experience and more than 3,000 systems installed in blast plant construction.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, pritisk: 6 letvica, trajanje garancije: 60 meseci, notranja širina: 5.000 mm, notranja dolžina: 10.000 mm, notranja višina: 5.000 mm, filtrirna površina: 250 m², volumenski pretok: 16 m³/h, Oprema: dokumentacija / priročnik, osvetlitev, Blast house *up to 5 years warranty* for all blasting media, constructed from a steel frame/insulated panels, with filtration system, recirculating air system, abrasive recycling, 200l pressure blasting pot with automatic refilling, blast hose with dead-man control, breathing air system, LED lighting, wall cladding with 70 shore 4mm fabric-reinforced rubber, sweeping pit with bucket elevator. Abrasive return via sweeping pit with bucket elevator, optionally upgradable to cross screw conveyor with metering hood spanning the full width as a sweeping pit or as a complete flat conveyor floor. Workpiece transport upgradeable: blast trolley with rail track, crane system, roof crane opening, etc. Iaedpfx Aeu Ey Dloa Uor For glass bead blasting of stainless steel, upgradeable with appropriate magnetic drawer or electrically driven magnetic drum separator. For blasting with two different blasting media (ferrous and mineral), upgradeable with magnetic drum separator, final demagnetization stage, and second air sifter for media separation and cleaning. Safety features: emergency lighting with battery backup, emergency stop switches inside the cabin and outside, inspection window to blast chamber, gate/door end switches, dead-man control, pressure vessel quick venting. Warranty up to 5 years on selected components. 50 years of experience and more than 3,000 systems built in blast room engineering.

Leto izdelave: 2021, obratovalne ure: 60 h, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: X620DM-WL, We are selling a high-quality industrial videoscope. As plant engineers, we used this device to inspect weld seams inside pipelines. It delivers excellent image quality and is very easy to operate. Unfortunately, the probe length of 2 metres is no longer sufficient for our applications, so we need to sell it and purchase a model with a longer probe. The unit is only 3 years old. Original order confirmation details: Portable video endoscope, VTec X series - Forward or side view, white light - State-of-the-art CMOS camera technology - Bright, high-resolution 5.5" handset display Probe diameter: 6.1 mm +0.1 Probe length: 2.0 m Viewing direction: 0° / 90° Depth of field: 7 - 80 mm / 3 - 30 mm Field of view: 100° / 90° Illumination: White light, front LED, 3.22 lm; white light, side LED, 6.45 lm Camera resolution: Front 1280 x 960 px; Side 1280 x 960 px Monitor resolution: 1920 x 1080 px Articulation: ≤ 150° ±10 Articulation control: 4-way motorised joystick Power supply: Four 18650 Li-Ion batteries with protection circuit or mains adapter Operating conditions, protection class, weight: Hand unit: -10°C to +50°C, IP54, 1.50 kg Probe: -20°C to +70°C, IP67 Scope of delivery: - VTec X620DM-WL video endoscope - SD-USB memory card reader - HDMI cable - Mini USB data cable incl. USB power adapter - Battery charger incl. power adapter - Power adapter - Four 18650 Li-Ion batteries with protection circuit - User manual - Carrying case Rigid over-sheath with hand grip for 6 mm videoscopes Working length of sheath: 350 mm Including 1/4" tripod thread mount Ijdpfx Asu Ul A Noa Usar

Stanje: novo, Leto izdelave: 2026, Peskalni voziček 10t za peskalno napravo s pnevmatskim pogonom. Isdpfxsyyxfro Aa Ujar - Pnevmatski pogon za obremenitev 10 t - Obremenitev: 10 t - Dimenzije: D=2000mm Š=2000mm V=500mm - Za tirni sistem - S sprejemnimi površinami za vpenjanje obdelovancev - Rotacijska miza kot opcija

Stanje: novo, Leto izdelave: 2025, Turbine rotary table system Diameter: 1500 mm; 2 x 7.5 kW blast wheels If you have any questions regarding technical specifications, please contact us in writing or by phone. The machines are manufactured at the Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with our long-standing, well-known contact persons. Iodpfx Aaodtq Anj Ujar

Stanje: novo, Leto izdelave: 2025, Blast wheel machine, suspended rail type 1.15 2T Working area: Diameter = 1000 mm, Height = 1500 mm, Payload = 500 kg Iasdpfx Aaodrr U Ss Ujr Equipped with 2 blast wheels, each 7.5 kW, including filter system and airborne dust filter. For questions regarding technical specifications, please contact us in writing or by phone. The foundation of our machines is the manufacturing facility at the Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with their long-standing, well-known contacts.

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: JEWELliner XS30-PRO Std, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 400 mm, skupna višina: 500 mm, skupna dolžina: 600 mm, skupna masa: 55 kg, trajanje garancije: 12 meseci, vrsta nastavitve višine: električni, širina odprtine vrat: 400 mm, višina odprtine vrat: 200 mm, valovna dolžina laserja: 1.064 nm, Developed, manufactured, and tested in Germany. JEWELliner "XS-PRO" Standard model available with 30W CW includes: An electric lift door, auto-focus functionality, and a compact machine footprint, allowing the device to fit in various workspaces. - Developed and manufactured in Germany - Further models, power ratings, and options available upon request. Engraving laser – marking laser – laser with "Laser Class 1" safety enclosure. Our JEWELliner "XS-PRO" Standard model marking laser is designed for engraving and marking all metals, selected plastics, and ceramics. The machine dimensions are L60 x W40 x H50 cm, allowing for space-saving integration into production environments. Applications: Jewelry, metalworking, and advertising industries Sample materials: Steel, stainless steel, gold, silver, titanium, aluminum, brass, copper, bronze, carbon fiber, ceramic, and Makrolon (polycarbonate). Application possibilities: - Graphic engraving (logos, drawings, sketches) - Photo engraving - Barcode (linear, Data Matrix, QR code) - Serial number marking - Inside ring engraving (e.g., name, date, symbol, script) optional - Outside ring engraving (e.g., name, continuous graphic/pattern) optional - Bangle (bracelet) inside and/or outside engraving – optional - Text engraving (straight text, circular text, arc text, text symbols) - Handwriting engraving - Fingerprint engraving - Micro engraving (micro text down to min. 0.25 mm character size) - Rotary engraving (markings on round or curved surfaces) optional Compact construction, all components are integrated in the housing and adequately air-cooled! The machine is maintenance-free! Standard equipment JEWELliner "XS" PRO (BN30XS-HRA): - Fiber laser unit with beam deflection head and focusing module - Laser Class 1 safety housing with 200x140 mm protective viewing window - Automatic door opening - Emergency stop switch - 180° view of marking area within the enclosure - Z-axis with electrically operated auto-focus - Includes BNMARK5 marking software! Made in Germany! Developed by BN Laser - Optional: rotary axis with removable jewelry chuck Technical specifications / data: Laser type: Fiber laser Output power CW: 30W Available frequency range: 22,000 - 820,000 Hz Connection: USB 2.0 Wavelength: 1064nm Lens (standard): F-Theta 163 Marking field size: 110 x 110 mm – smaller available upon request Focus depth: approx. 1.7 mm Min. character height: 0.25 mm Min. line width: 0.023 mm Cooling: Air-cooled Iaodpfx Aajc Rmy Ne Uer Maintenance: Maintenance-free Power supply: AC 110V/240V – 50/60Hz, short-circuit protected Dimensions: L600 x W400 x H500 mm Weight: approx. 55 kg The marking laser is ready for operation upon delivery and can be quickly integrated into your production environment. We are happy to produce engraving samples for you as well. Images may differ from actual product.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: JEWELliner "XS" PRO Modell "Premium", vrsta vhodnega toka: Klimatska naprava, laserska moč: 30 W, skupna širina: 400 mm, skupna višina: 500 mm, skupna dolžina: 600 mm, skupna masa: 55 kg, trajanje garancije: 12 meseci, vrsta nastavitve višine: električni, širina odprtine vrat: 400 mm, višina odprtine vrat: 200 mm, valovna dolžina laserja: 1.064 nm, Developed, manufactured, and tested in Germany. JEWELliner "XS" model "Premium" available with 30W CW and camera Iaedpfxjppxmkj Aa Usr - Electric lift door – auto-focus – compact machine size - - Developed and manufactured in Germany - Further models, power ratings, and options available on request. Engraving laser – marking laser – laser marker with "Laser Class 1" protective enclosure. Our JEWELliner "XS-PRO" model "Premium" marking laser is suitable for marking and engraving all metals, select plastics, and ceramics. The machine dimensions are L60 x W40 x H50 cm, allowing for space-saving integration into production environments. Applications: Jewelry, metal, and advertising industries. Material examples: Steel, stainless steel, gold, silver, titanium, aluminum, brass, copper, bronze, carbon, ceramics, Makrolon. Application possibilities: - Graphic engraving (logo, drawing, hand-drawing) - Photo engraving - Barcode (bar code, Data Matrix, QR code) - Serial number marking - Inner ring engraving (e.g., name, date, symbol, handwritten)—optional - Outer ring engraving (e.g., name, continuous graphic, continuous pattern)—optional - Bangle engraving inside and/or outside—optional - Text engraving (straight text, circle text, text arc, text symbols) - Handwriting engraving - Fingerprint engraving - Micro engraving (microtext down to min. 0.25 mm character height) - Rotary engraving (marking on round or curved surfaces)—optional Compact construction, all components integrated in the housing and efficiently air-cooled! The machine is maintenance-free! Standard equipment JEWELliner "XS" PRO (BN30XS-HRA): - Fiber laser unit with deflection head and focus module - Laser Class 1 safety housing with 200x140 mm viewing window - Automatic door opening - Emergency stop switch - 180° view of the marking area within the housing - Z-axis with auto-focus – motorized - Rotary axis with removable jewelry chuck - Incl. marking software (final configured) - High-resolution industrial camera USB 3.1 Technical specifications / data: Laser type: fiber laser Output power CW: 30W Available frequency range: 1.8 - 2,000kHz Connection type: USB 2.0 Wavelength: 1064nm Lens (delivered): F-Theta 163 Marking field size: 110 x 110 mm (smaller sizes available) Focusing range: approx. 1.7 mm Min. character height: 0.25 mm Min. line width: 0.023 mm Cooling: air-cooled Maintenance: maintenance-free Power supply: AC 110V/240V – 50/60Hz, short-circuit proof Dimensions: L600 x W400 x H500 mm Weight: approx. 55 kg The marking laser is ready for operation immediately after delivery and can be quickly integrated into your own production process. We are also happy to produce engraving samples for you. Images and illustrations may differ.

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: BN20XS "Standard", dolžina gredi: 1.064 mm, teža obdelovanca (maks.): 5 kg, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 20 W, vrsta hlajenja: zrak, skupna širina: 400 mm, skupna višina: 500 mm, skupna dolžina: 600 mm, delovno območje: 70 mm, skupna masa: 30 kg, trajanje garancije: 12 meseci, vrsta nastavitve višine: električni, maks. debelina aluminijaste pločevine: 3 mm, širina odprtine vrat: 400 mm, višina odprtine vrat: 350 mm, pomik po osi Z: 100 mm, JEWELliner "XS2" model: "Standard" with 20W CW laser power. - Developed and manufactured in Germany (proven) - Other models, laser powers, and options available on request. Engraving laser – marking laser – laser marking system with “Laser Class 1” protective housing. Iodpeppxlmsfx Aa Uear Our JEWELliner "XS2" marking laser is suitable for marking and engraving all metals, selected plastics, and ceramics. The compact housing size of L50 x W40 x H50 cm allows for space-saving integration into production environments. Applications: Jewelry, metal, and advertising industries Sample materials: Steel, stainless steel, gold, silver, titanium, aluminum, brass, copper, bronze, carbon, ceramics, Makrolon Application possibilities: - Graphic engraving (logos, drawings, hand sketches) - Photo engraving - Barcode (barcode, data matrix, QR code) - Serial number marking - Optional: inner ring engraving (e.g. name, date, symbol, handwriting) - Optional: outer ring engraving (e.g. name, continuous graphic, continuous pattern) - Optional: bangle engraving (inside and/or outside) - Text engraving (straight text, circular text, arched text, text symbols) - Handwriting engraving - Fingerprint engraving - Micro-engraving (micro text, minimum font size 0.15 mm) - Optional: rotary engraving (marking on round or curved surfaces) Compact design—all components are installed in the housing and sufficiently air-cooled! The machine is maintenance-free! Standard equipment JEWELliner "XS2" (BN20XS2-HR): - Fibre laser unit with deflection head and focus module - Laser Class 1 protective housing with 140 x 100 mm protective viewing window - Manual door opening - Emergency stop switch - 180° field of view of the marking area inside the housing - Electrically adjustable Z-axis - Includes marking software (configurable) - Rotary axis included Technical specifications/data: Laser type: fibre laser CW output power: 20W Available frequency range: 28-64kHz Connection type: USB 2.0 Wavelength: 1064nm Standard lens: F-Theta 163 Marking field size: 70 x 70 mm (smaller sizes possible) Focal range: approx. 1.0 mm Minimum character height: 0.15 mm Minimum line width: 0.020 mm Cooling: air-cooled Maintenance: maintenance-free Power supply: AC 110V/240V – 50/60Hz, short-circuit proof Dimensions: L500 x W400 x H500 mm Weight: approx. 30kg The marking laser is ready for operation immediately after delivery and can be quickly integrated into your production process. Sample engravings can be produced on request. Images and illustrations may vary!

Leto izdelave: 2024, stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Iajdpfjhx Elfsx Aa Ujr Screw speed [rpm]: 20–200 Screw axial pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency inverter Drive power [kW]: max. 2.5 Reduction gearbox with integrated axial bearing Weight [kg]: approx. 160 Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Max. processing temperature [°C]: 300 Control cabinet and operator panel The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 20.331 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 970 mm, dolžina polnilne odprtine: 1.800 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 750 kg, skupna masa: 33.000 kg, Good day, We hereby offer, subject to prior sale, a used, complete baling line consisting of a baler from the manufacturer HSM, type VK 8818 R-FU including conveying technology and wire tying stations. The following technical data have been taken from the operating manual and manufacturer brochures. We assume no liability for the correctness or completeness of this information. Technical Data Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours, as of September 2025 Number of bales pressed: 29,020 bales, as of September 2025 Main press force: 1,000 kN Specific press force: 120 N/cm² Shear-edge ejector press force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time in idle operation: 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2000 mm Drive capacity: 2 x 45 kW, frequency-controlled Total connected load: 110 kW Total current consumption: 213 A Fuse protection: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput rates at bulk density of 20 kg/m³: 12.86 t/hour bulk density of 50 kg/m³: 32.15 t/hour Bale weight at a bale length of approx. 1.2 m: 650 to 750 kg per bale, depending on material Hydraulic oil tank volume: 2,000 L HVI 46 PLC: Siemens S7-300 Operator panel: Siemens TP 700 Dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions with conveyor technology: 35,000 x 8,480 x 7,745 mm (L x W x H) Weight baler: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional special equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to standard 2 x 45 kW motors at the same output Manual activation/deactivation of wire tying strands to save tying wire with non-expanding materials Shear-edge ejector with 121 kN press force Wire break/end sensor monitoring, with baler shut-off in the event of wire breakage or wire end Bale slide Optical warning signal mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor technology) is in good, immediately operational condition and has been cleaned, lubricated, and maintained weekly by the operator in accordance with the manufacturer’s specifications. Technical Data Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain belt conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Length of feed belt: 7,000 mm Length of ascending belt: 14,500 mm Length of goose neck: 1,550 mm Inclination: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Ijdpjyz Af Esfx Aa Usar Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: - HSM VK 8818 R-FU baler - Service platform - Bale slide - Wire deflection stations - Wire spool trolleys (without wire spools) - Stadler KF 1800 chain belt conveyor - Crosswise sliding belt conveyor - Pit cover from the feed conveyor to the pit - Second control cabinet for baler operation at the conveyor - Machine documentation in English Delivery time: The entire plant has already been dismantled and stored, and will be ready for loading shortly after payment is received. We would be pleased if this or one of our other balers is of interest to you. Your service team, Mertens & Frowein GmbH

Stanje: novo, Leto izdelave: 2025, Priprava abraziva 1x pometna jama 1x vedričasti transporter 1x zračni separator 1x električno vibracijsko sito 1x bunker za abraziv Iodpfx Aaew Ivvco Usar 1x tlačna peskalna naprava 200 l 1x peskalna cev, peskalna šoba, varnostno stikalo, krmilni kabel 1x krmilna omarica Opcijska oprema: - Prečna polžna transportna naprava čez celotno širino peskalne hale (tudi kot dodatni zalogovnik za večurno peskanje) - Razširitev na 2 abraziva: feritno in mineralno - Bubenski magnetni separator - Končna stopnja demagnetizacije - Magnetni predal

Stanje: novo, Leto izdelave: 2025, Blast Container High Cube Basic with Sweep Floor Shovel Hopper for approx. 4 pressure vessel fillings + blast vessel filling for extended blasting operation without refilling. Type SC.20FHC.5800 Basic Standard equipment, ready for operation: (Fill blasting media and connect power and compressed air) - 1x Control cabinet with emergency stop, Siemens Logo - 1x Pressure blast vessel - 1x Pressure regulator and water separator - 1x Blast hose DN 25 with 8mm nozzle - 1x Remote control with dead man's switch - 1x Media loading box/bunker - 1x Blast media sieve + coarse particle collection bin - 1x Vertical separator with blast dust extraction (dust reduction during blasting) - 1x Filter unit with pre-chamber separator - 1x Extraction wall as louvre/baffle separator - 1x Rubber wall cladding, 4mm with fabric reinforcement - 1x Tread plate floor 3/5 - 1x LED lighting - 1x Emergency lighting, door end switch, emergency stop Iaodpfjw Ivk Tsx Aa Uor - 1x Breathing air filter - 1x Blasting helmet - 1x Blasting gloves - 1x Suit Options: - Side Door Open, container can be fully opened on the side for easy forklift loading - Container widening - Container extension - Crane roof hatch - Crane rail 500 kg - C-profile rail for powder coating equipment - Blast trolley - Filter with Big Bag - HEPA after-filter for contaminated dusts, e.g., when blasting stainless steel - Stainless steel tread plate floor for stainless steel blasting - Aluminum tread plate floor - And much more on request!

Stanje: novo, Leto izdelave: 2026, Peskalni voziček 5t z baterijskim pogonom za peskalno napravo - Nosilnost 5t - Za tirni sistem - Baterijski pogon - Daljinsko upravljanje - Dimenzije: dolžina 3000 mm, širina 1000 mm Isdpfxoyyxido Aa Ujar - Površine za namestitev držal za obdelovance

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Ročni strojni voziček za peskalno napravo, nosilnost 5 t - D= 3000 mm, Š= 1500 mm, V= 500 mm - Nosilnost: 5 t - Peskalni voziček s obročastimi valji za tirnice v peskalni hali - Profili postavljeni pokonci, da lahko peskalni material odteče - Vlečne zanke za viličarja Iaodpjyyxa Nsfx Aa Uor - Vrtljiva miza na voljo kot opcija

Stanje: rabljeno, kapaciteta rezervoarja: 8.750 l, GÉNÉRAL Forme : rectangulaire Remarques : Chaque cuve dispose de 2 plaques de refroidissement à l'intérieur ; 1 trou d'homme d’environ 300 x 400 mm en fond frontal ; pieds équipés de vis à calotte mobiles et réglables en hauteur (éventuellement pas complets pour tous les pieds ; les calottes n'ont pas été prises en compte dans la hauteur totale, celle-ci s’élèvera en cas d’utilisation) ; les pieds sont légèrement décalés. Largeur totale : 1 620 mm Hauteur totale : 2 700 mm Longueur totale : 2 950 mm Chauffage/Refroidissement : présent Localisation : Brême Plaque signalétique : Volume : 8 750 litres Matériau en contact avec le produit : V2A 1.4301 (AISI304) État : occasion Dernière utilisation : stockage de vin Iodpfeycktrex Aa Ujar CUVE Type de support : sur pieds Nombre de pieds : 4 pcs MANTEAU CHAUFFANT/REFROIDISSANT Tempérage intérieur : plaque de refroidissement ÉQUIPEMENT Vidange : DN40 DIN 11851 QUALITÉ DES MATÉRIAUX Matériau du système de tempérage : inox Matériau des pieds : inox

Leto izdelave: 2015, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: A-150016, AUTOMATED ADHESIVE APPLICATION MACHINE, SURFACE GANTRIES AND AUTOMATED INSERTING UNIT FOR METAL SHEET INLAYS This system is part of a larger production line; please also refer to our other listings for more information. The offered system includes 3 provisioning stations for cover layers, an automated adhesive application machine for sandwich bonding, a lay-up conveyor for the manual assembly of the inlay/ribbing, surface gantries for the handling of cover layers, and an automated inserting unit for metal sheet inlays/reinforcement points. Iaedpfxsyt Nm Sj Aa Usr COMPONENT DIMENSIONS (from previous production): L/W min: 2000mm x 1500mm L/W max: 8000mm x 2500mm H min: 12mm H max: 60mm MATERIALS (from previous production): GRP, sheet metal, plywood, wood/PU strips, PVC, Styrofoam GLUING PORTAL FOR CONTOUR & SURFACE APPLICATION (of cover layers & inlays): Number of needle valves for surfaces: 104 Number of needle valves for contour: 1 Adhesive system: 1C-PUR Number of nozzles for water spray unit: 8 ANCILLARY UNITS: Climatic chamber (storage for 1C-PUR adhesive) Vacuum pump for surface gantries Punching unit

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 6034, potovalna razdalja osi X: 7.200 mm, pomik osi Y: 450 mm, pomik po osi Z: 590 mm, hitro pomikanje X-os: 50 m/min, hitri pomik os Y: 25 m/min, hitri pomik na osi Z: 25 m/min, nazivna (navidezna) moč: 45 kVA, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: Bahnsteuerung iTNC 530, skupna višina: 2.900 mm, skupna dolžina: 12.500 mm, skupna širina: 4.810 mm, skupna masa: 14.000 kg, hitrost vretena (min.): 100 obr/min, največja hitrost vretena: 12.000 obr/min, obratovalni tlak: 7 letvica, The BZ 7000 is designed exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastics, and wood (chipboard and solid wood). URBAN CNC Machining Center BZ 7000 • Year of manufacture: 04/2008 • Control: HEIDENHAIN contouring control iTNC 530 • 4 axes • Travel paths X / Y / Z axes: 7200 / 450 / 590 mm • Working area X / Y / Z axes: 7000 / 400 / 350 mm • Weight: 14 t Equipment - Robust base structure as a welded frame construction - Linear ball guideways on all axes - Milling spindle unit: 100 - 12,000 rpm, tool holder SK 40 Drives: - X-axis (50 m/min) by rack-and-pinion drive - Y/Z axes (25 m/min) by ball screw drive - B-axis 9,000°/min - Swiveling operator panel - Automatic central lubrication - Traveling tool changer for 12 tool holders SK 40 - Coolant emulsion system - Machine lamp Ijdpfx Aaeyzxfno Uoar - Safety fence - Electronic handwheel integrated into the control panel - Chip drawers - Laser scanner - Minimum quantity lubrication Technical Data - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per cycle: approx. 600 l/min at 6 bar - Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz - Control voltage: 24 V DC - Rapid traverse: X-Y-Z 50 – 25 – 25 m/min - Infinitely variable feed: 0 – 5,000 mm/min - Tool change: disc changer with 12 tool stations SK 40 - Tool holder: SK 40 - Tool clamping: hydraulic - Coolant system: emulsion, 300 liters - Spindle speed: 100 – 12,000 rpm - Speed correction: 80 – 120% - Drilling capacity in St 60 / Al: up to 28 mm Ø - Thread cutting capacity in St 60 / Al: up to M24 - Position measuring system: rotary encoder/length measuring system - Positioning accuracy: 0.025 mm - Repeatability: 0.015 mm - Control: HEIDENHAIN iTNC 530 M, 4 controlled axes - Data interface: V 24/RS - 232 - C - Travel paths X / Y / Z axes: 7,200 / 450 / 590 mm - Working area X / Y / Z axes: 7,000 / 400 / 350 mm - Space requirement with safety fence: approx. 60 m² (12.5 x 4.8 m) - Machine weight with accessories: approx. 14 t - Sound emission: average sound pressure level 79 dB (A)

Stanje: rabljeno, Leto izdelave: 1991, consisting of: - SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m²) - Feed tank 1,200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l compensation tank - Shell and tube heat exchanger - Compressed air reduction station - Control cabinet with operator panel Machine (additional description): Juice heating system for pasteurization Capacity: 100 hl/h Permissible operating pressure (PWT): 16 bar, test pressure 20.8 bar Heat exchange surface: 21 m² Length: 5.6 m Width: 2 m Height: 2.4 m Ijdpfjvcqy Ujx Aa Uear Control / Operation: Control cabinet with push-button operation Material: Stainless steel Base construction: Frame Equipment: 2 x tanks; Plate heat exchanger; Shell and tube heat exchanger; 2 x product pumps; Measuring, sensor and control technology, various valves and other fittings

Stanje: dober (rabljeno), Leto izdelave: 2011, obratovalne ure: 40.000 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 88 t, širina odprtine za polnjenje: 990 mm, dolžina polnilne odprtine: 1.800 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, skupna masa: 23.000 kg, kapaciteta rezervoarja za olje: 2.000 l, moč: 90 kW (122,37 KM), volumenski pretok: 643 m³/h, Good day, We hereby offer, without obligation, a used baling press including conveyor belt, wire tying stations, and bale chute, manufactured by HSM GmbH + Co. KG, model VK 8818 FU. The following technical data have been taken from the manufacturer's operating manual and brochures, for which we do not assume any liability for accuracy or completeness. Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours (as of July 2025) Main press force: 880 kN Specific pressing force: 107 N/cm² Feed opening dimensions: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency controlled Iaodjymmtcepfx Aa Ujr Tying: 5-fold horizontal, fully automatic Press dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions including conveyor system: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: The machine was used at a recycling facility for compacting paper, cardboard, and film. The press is in good condition and will be replaced by a new, larger press in May/June 2026. Until then, the machine can be viewed in operation with material feed. We would be pleased if this press is of interest to you. Your service team, Mertens & Frowein GmbH

Stanje: novo, Leto izdelave: 2026, Tlačna peskalna kabina za notranje peskanje cevi z vrtljivo mizo in ročnim načinom peskanja Ijdpfx Asyn Inwea Usar - Filtrirna naprava - Vrtljiva miza s prizmo za vstavljanje kot podpora cevi - Pogonska notranja cevna šoba - Možnost shranjevanja programa: pot gibanja, hitrost podajanja, funkcija izpihovanja - Zunanja peskalna šoba z oscilacijo (opcija)

Stanje: novo, Leto izdelave: 2026, Pressure blasting cabinet, 4-axis controlled, for cleaning moulds, steel rings, die casting moulds, tyre moulds, press tools, etc. The travel path of the blasting nozzles is freely programmable. Includes 2 automatic nozzles and 1 manual blasting nozzle for post-cleaning of parts. Fitted with a Hardox turntable and screw conveyor for durable operation of the blasting system. For any technical questions, please contact us in writing or by phone. Iajdsdrtanopfx Aa Uor The machines are manufactured at our Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with our long-standing, well-known representatives.

Stanje: novo, Leto izdelave: 2026, Vis sans fin de transport d'abrasif de 5 m avec capot doseur pour installation en tant que vis de transfert transversal vers l'élévateur à godets en bout de hall (insertion d'abrasif sur toute la largeur du hall à l'aide d'un chariot élévateur). - 5 m + sortie vers l'élévateur à godets, vis à ailettes pleines Ø250 mm avec spires de 5 mm d'épaisseur. - Peut servir de réservoir d'abrasif. La grenailleuse se réapprovisionne automatiquement si nécessaire via une sonde de niveau. - Selon la profondeur d'installation, permet d’effectuer des opérations de grenaillage jusqu'à 24 heures sans nettoyage du hall. Iodpfxjynz Ids Aa Ujar - Nettoyage du hall possible en 10 minutes avec un chariot élévateur ou un chargeur sur pneus. - Très faibles coûts d'entretien et de réparation par rapport à un plancher convoyeur complet. - Particulièrement adaptée pour des pièces très lourdes. - Coûts d’acquisition inférieurs à ceux d’un plancher convoyeur complet. - Coûts de fondation réduits par rapport à un plancher convoyeur complet. - Peut être insérée sur toute la largeur du hall, contrairement à une fosse de balayage. - Garantie longue durée très élevée.