Amada Cnc Stroj Za Prebijanje nakup rabljenega (87.202)

Stanje: rabljeno, CNC Press Brake AMADA Model HFBO 50 x 2000 Serial No.: HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8-axis CNC control - Operateur II Press capacity: 50 tons Working length: 2,090 mm Stroke: 200 mm Throat depth: 420 mm Clearance between side frames: 1,660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Iaedpfsw Iq Ugox Agtst Power supply: 400 V, 50 Hz, 20 A - 8-axis CNC control Operateur II: Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2 - 2 freely programmable back gauge fingers, adjustable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-type tool clamping for the upper tool (5 units AMADA Expert, 5 units UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - Upper tooling set, 11-piece, 30°, total length 1,675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) - Lower tooling, 2-piece, 88° - V8, total length 1,250 mm - consisting of: 1x 835 / 1x 415 mm - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book available Weight: 4,700 kg Good condition

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, obratovalne ure: 55.582 h, številka stroja/vozila: A0110A0058, model krmilnika: BOSCH PNC-P, laserska moč: 2.000 W, število mest v zalogovniku orodij: 21, TECHNICAL DETAILS Working area: 2500 x 1250 mm Max. sheet thickness: 4.0 mm Max. punching force: 165 kN Max. active hold-down force: 9 kN Max. workpiece weight: 120 kg Part chute max. part size: 300 x 500 mm Speeds X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X and Y): 108 m/min C-axis punching: 60 rpm C-axis thread forming: 180 rpm Max. stroke rate punching (F=1 mm): 600 strokes/min Max. stroke rate scribing: 1300 strokes/min Tools Number of tool and clamp positions: 21 Tool change time Single tool: 4.4 s Multitool: 2.2 s Laser data Guaranteed maximum power: 2000 W Laser model: TCF1 Power distribution: TEM∞ Beam quality² K (M²): 0.9 (1.1) Laser gas consumption (CO₂, N₂, He, Xe, CO) Cutting gas⁴: max. 1 cylinder premix gas p.a. Laser cutting head lens size: 5" MACHINE DETAILS Control model: BOSCH PNC-P Power-on hours: 25,582 h Electrical consumption of laser system: 65 kVA EQUIPMENT Robust C-frame Coordinate guidance with integrated linear scale 2 clamps Maintenance-free three-phase servo motors Brush tables HI-LAS high-pressure cutting Fast processing with SprintLas Programmable scan feed Quick-change cutting head APC capacitive height control Lens monitoring sensors Laser logbook function Compact nesting table Rotatable tool holder Automatic re-positioning unit with hold-down Automatic part chute Sliding part container Spray lubrication for punch 2 lubricant containers Punch slug extraction Chip container Hydraulic quick shut-off External control panel 15" TFT color touchscreen USB stick interface 3.5" floppy disk drive Safety device RJ45 network connection Network connectivity Comprehensive operating manual Remote diagnostics capability SPECIAL EQUIPMENT Thread forming function Softpunch function Height-adjustable clamp Reposition cylinder Vibration-damped installation Part chute sensor Spray lubrication for die Iedpfx Aoyv Ddregtsat Loading/unloading aid with brush Note: The machine has already been dismantled (by certified TRUMPF used machine partner) and is ready for shipment.

Leto izdelave: 2010, stanje: pripravljen za uporabo (rabljen), An Amada CNC turret punching machine and an automatic loading and unloading unit LKI Käldman (Amada) are available. 1) CNC turret punching machine Amada EMZ3610, year of manufacture: 2010, punching force: 300kN, X/Y travel: 2500mm/1525mm, X/Y travel with repositioning: 5000mm/1525mm, max. material thickness: 4.5mm, max. table load: 160kg. Travel speed X/Y: 100m/80m/min, axis speed: 128m/min, positioning accuracy: +/-0.1mm. Number of turret stations: 45, auto-index stations: 2xB/2xC, turret speed: 30rpm, stroke rate: 1000 strokes/min, machine weight: approx. 21,000kg. 2) Loading and unloading system LKI Käldman (Amada) MP Sheetcat 3015, year of manufacture: 2017, min. sheet dimensions X/Y: 1000mm/300mm, max. sheet dimensions X/Y: 3050mm/1525mm, sheet thickness: 0.8mm–6mm, max. sheet weight per pallet: 3000kg, suction cups: 34. Machine dimensions X/Y/Z: approx. 8400mm/3600mm/3100mm. Documentation available. An on-site inspection is possible. Iodpfxev Rp Tco Agtjat

Stanje: pripravljen za uporabo (rabljen), A Finn-Power CNC punching press is available. Press force: 300 kN, max. workpiece width: 4061 mm, max. workpiece length: 1528 mm, max. workpiece thickness: 8 mm, max. workpiece weight: 200 kg, rapid traverse X/Y: 80 m/min / 60 m/min. Turret stations: 20, turret speed: 30 rpm, tool type: thick turret, max. tool diameter: 89 mm. Travel speed: 100 m/min, punching accuracy: 0.1 mm, positioning accuracy: 0.08 mm, oil tank capacity: 330 l, max. operating pressure: 300 bar. Machine dimensions X/Y/Z: approx. 5900 mm / 6300 mm / 2500 mm, weight: approx. 13,500 kg, control: Siemens Sinumerik 840D. The machine table has been extended. No machine enclosure. Documentation available. An on-site inspection is possible. Iasdpovf Ix Hefx Agtet

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), A CNC turret punch machine by Amada for medium-format sheets, including an MP300 M loading unit, a Wilson X-Sharp grinding machine, and numerous standard and special punching tools is available. 1) CNC Turret Punch Machine Amada, year of manufacture: 2007, punching force: 300 kN, max. sheet dimensions X/Y: 3000mm/1500mm, max. sheet thickness: 6.35mm, stroke rate: 600 strokes/min, simultaneous positioning speed: 128 m/min, repeatability: +/- 0.1mm, machine dimensions X/Y/Z: approx. 5100mm/3200mm/2300mm, weight: approx. 18,000kg. 2) Automatic sheet loading and unloading system Amada MP 300 M, max. sheet dimensions X/Y: 3000mm/1500mm, min. sheet dimensions X/Y: 1000mm/300mm, sheet thickness range: 0.8mm-6mm, max. load per pallet: 3000kg, max. stacking height: 400mm, max. sheet weight: 170kg, max. pallets: 9, pallet change time: 25s, sheet loading time: 18s, weight: approx. 4900kg. 3) Tool grinding machine Wilson X-Sharp. Documentation available. On-site inspection is possible. Iaedpjwhp N Defx Agtot

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11.22-LP6122804, Finn-Power LP6 SWT je kombiniran CNC stroj za lasersko rezanje in prebijanje, zasnovan za visoko učinkovito obdelavo pločevine. Proizveden leta 2004, ta model združuje hidravlično prebijanje in rezanje z CO₂ laserjem, kar ga naredi primernega za kompleksne in raznolike proizvodne naloge. Iodpfx Agsxcnipotoat

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, Uporabno delovno območje: 3000 x 1500 mm Laserska glava: Klinge ali Precitec (opcijsko) Iedpfx Agoy It Ttjteat Povratna natančnost X/Y: 0,05 mm / 1000 mm Nosilnost mize: maks. 800 kg Maksimalna hitrost: 120 m/min Maksimalno pospeševanje: 1,5 g Potreba po plinu za rezanje: kisik in dušik Vlaknasti laser: IPG 2500 W Obdelava kovin: jeklo, nerjavno jeklo, obloženo nerjavno jeklo, pocinkano jeklo in aluminij (pri 1 kW) Teža: 7500 kg Zamenljiva delovna miza: Da (2 mizi, avtomatski menjalec miz) Ohišje: Da

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 280022, Štanca za profile Schüco za fasadno serijo FWS50 in FWS60 s podnožjem. Isdjy R D Akjpfx Agtsat

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2013, laserska moč: 2.700 W, X working area max.: 2500 mm Y working area max.: 1250 mm Control: Rexroth IndraMotion MTX-based Laser power: 2700 watts Standard Equipment Machine - Sturdy, easily accessible C-frame - Coordinate guidance system for high-precision machining - Linear magazine with 23 tool stations and 2 clamps - Drives with maintenance-free three-phase motors - Repositioning device with programmable holddown - Foot switch for clamp closure - Alignment pin (right inside) - Ball tables - 2 part flaps 500 x 500 mm incl. sensor for part ejection - Two finished part containers - NitroLine - Focus Line - FastLine - FlyLine - Slag cone detection - Ejector cylinder for laser parts TRUMPF Laser - Laser TruFlow 2000 with LensLine and optimized standby - High-frequency excitation - Cooling unit - Laser control - Closed beam guidance - Fine filtration compressed air for beam pipe ventilation Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change device UTI with bus connection - ControlLine Punching Station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable holddown with manually adjustable force - Stroke counter for punches and threads - Spray lubrication for punches Iaodoy Saqmjpfx Agtjt - Punch slug extraction - Fill level calculation in punching console - Thread forming and tool lubrication level monitoring Control - TRUMPF control based on Rexroth IndraMotion MTX - Operating panel with 17" touch screen - Integrated technology data - Teleservice via internet - Programmable cutting gas pressure - Auto shut-off incl. wake-up mode - Program management - Production planning Data Transmission - Network connection RJ45 and USB interface Safety - CE marking - Two-beam light barriers - Monitoring system, including for gas pressure, temperature, cooling water - Emergency stop - Protection against stray radiation - Compact dedusting system + Brush tables + Lowerable die + MultiTool function + Softpunch function + Marking function + Chip conveyor with tilting container + Roll technology: roll knurling, roll deburring, roll shearing, roll stepping, roll beading, roll cutting + Spray lubrication for die + Blow-off device for small parts + 1x additional clamp + Smart Punch Monitoring (punch breakage monitoring) + Vibration-dampened installation + Repositioning cylinder + Warping detection + Parts conveyor for punching area + Parts conveyor for laser area + GripMaster (2500x1250) + Scissor lift table + Skeleton grid pallet + SheetMaster (2500x1250) (AK04) + Peeling system + Automatic clamp closing + HZP loading/unloading + TwinCarts loading station with toothed belt drive + TwinCarts unloading station with toothed belt drive

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, laserska moč: 4.000 W, X axis working area max.: 3050 mm Y axis working area max.: 1550 mm Control system: Rexroth IndraMotion MTX Laser power: 4000 watts Standard Equipment: Iedpfx Agjy Saqgjteat Machine - Sturdy, easily accessible C-frame - Precision coordinate guideways for high-accuracy machining - Linear tool magazine with 21 tool stations and 4 clamping claws - Drives with maintenance-free three-phase motors - Secondary clamping device with programmable hold-down - Foot switch for clamping claw closing - 2 containers for finished parts - Automatic shutdown feature Laser Station - TruFlow laser - High-frequency excitation - Cooling unit - TASC 3 laser control - Enclosed beam guide - Beam tube ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal Quick-Change Cutting Head Unit UTI with bus connection - LensLine - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine - FlyLine - PlasmaLine - High-speed cutting - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast hatch for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook functionality Punching Station - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down with adjustable pressure - Stroke counter for punches - Spray lubrication for punches - Punch slug extraction - Sheet deformation detection - Flap for punched parts 500 x 500 mm - Monitoring of material fill level in the punching console Control - Open control system based on Bosch Rexroth IntraMotion MTX - Operating panel with 15" TFT touchscreen - Program management and 80 GB storage capacity - Diagnostic function with laser logbook - Integrated technology database - Remote service (teleservice) Data Transfer - Network port RJ45 and USB interface Safety - CE marking - Multi-beam light curtains - Monitoring system for gas pressure, temperature, cooling water, etc. - Hydraulic emergency stop - Protection against stray radiation - Compact dust extraction unit - TruFlow 4000 - Vibration-damped installation - Thread forming function - MultiTool function - Chip conveyor with tipping container - Active die - Blow-off device for small parts - Brush tables with loading assistance - Marking function - Secondary cylinder - Sheet deformation detection

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 23.291 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.200 mm, pomik osi Y: 1.400 mm, pomik po osi Z: 750 mm, dolžina mize: 3.200 mm, širina mize: 1.400 mm, TEHNIČNI PODATKI Pomik X-os: 3.200 mm Pomik Y-os: 1.400 mm Pomik Z-os: 750 mm Velikost mize: 3.200 x 1.400 mm PODROBNOSTI STROJA Vrsta krmiljenja: CNC Krmilni sistem: Heidenhain Obratovalne ure Obratovalni čas vretena: 23.291 h Delovni čas programa: 27.807 h Čas vklopa krmiljenja: 83.301 h Iodpfxoy R Dn Ho Agteat Čas vklopa stroja: 73.907 h

Stanje: rabljeno, CNC Universal Tool Grinding Machine SCHÜTTE Type BU 400 CNC 4 Machine - Defective - without control unit Machine not operational - no electrical function - without CNC control unit Serial No.: Year of manufacture 1990 4 axes (X, Y, Z, and R) Table clamping surface 1300 x 250 mm Centre distance 700 mm Centre height 155 mm Grinding length (X-axis) max. 400 mm Grinding width (Y-axis) max. 260 mm Grinding spindle speed max. 6000 rpm Grinding spindle drive 3 kW Power supply 380 Volt, 50 Hz, 25 Amp. - CNC control unit dismantled Iaodod Rmcmepfx Agtst Space requirement (L x W x H) 3800 x 2400 x 2300 mm Weight 3000 kg Machine not functional, CNC control unit missing. Mechanically in good condition, ideal for CNC retrofit Can be used as a source of spare parts or for refurbishment with a new control unit.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 8.948 h, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 9.500 obr/min, dolžina podajanja os X: 470 mm, dolžina pomika po osi Y: 330 mm, dolžina podajanja os Z: 660 mm, vrsta vhodnega toka: trifazni, premer brusilnega koluta: 200 mm, skupna masa: 4.500 kg, dolžina brušenja: 350 mm, hitrost pomika os X: 15 m/min, hitrost podajanja osi Y: 15 m/min, hitrost podajanja os Z: 15 m/min, moč motorja brusilnega vretena: 11.500 W, vhodna napetost: 400 V, leto zadnje generalne obnove: 2026, CNC stroj za brušenje orodij WALTER Helitronic Power TEHNIČNE ZNAČILNOSTI: Leto izdelave: 2008 CNC krmilje: FANUC Series 31i-model A5 Nameščena programska oprema: Tool Studio 3 Število osi: 5 Višina središč: 145 / 190 mm Hod X-os: 470 mm Hitropotezni pomik X-os: 15.000 mm/min Hod Y-os: 330 mm Hitropotezni pomik Y-os: 15.000 mm/min Hod Z-os: 660 mm Iaodoy Sxrpopfx Agtst Hitropotezni pomik Z-os: 15.000 mm/min Zasuk A-os: 360° Zasuk C-os: +/- 200° Maks. dolžina obdelovanca (čelno brušenje): 280 mm Maks. dolžina brušenja: 350 mm Maks. premer brušenja: 320 mm Maks. hitrost brusnega vretena: 9500 obr/min Moč motorja brusnega vretena: 11,5 kW Maks. premer brusnega kamna: 200 mm Delovne ure: 8948 h Tlak črpalke hladilne tekočine: 7 bar Pretok črpalke hladilne tekočine: 120 l/min Kapaciteta rezervoarja za mazanje: 400 l Napajalna napetost: 400 V Skupna priključna moč: 25 kVA Teža: 4500 kg OPREMA VKLJUČENA V CENO: 1x programska oprema TOOLSTUDIO 3 1x direktni pogon osi A (Hollow Shaft) 1x avtomatski sistem za vpenjanje orodij 1x sonda za merjenje RENISHAW LP2 1x izlovilec oljne megle DSL Air Technology tip AES-GAMMA 30 1x rezervoar za mazanje z papirnim filtrom 1x črpalka za hladilno tekočino GRUNDFOS 35x nosilec brusnega kolesa (opremljeni s CBN kolesi) 22x vpenjalne glave ISO50 1x vpenjalo SCHUNK 22x vpenjalni vložek (collet) 1x vpenjalo NIKKEN 13x vpenjalni vložek NIKKEN 1x kovinsko stojalo za nosilce brusnih koles in ISO50 nastavke 1x kalibracijska konica ISO50 za kalibracijo osi 1x kalibracijski disk za kalibracijo osi 1x set servisnih ključev Različna tehnična dokumentacija Stroj je mogoče videti pod napetostjo v naših prostorih po dogovoru. Cena po dogovoru, nakladanje na tovornjak vključeno v ceno. Možnost svetovne dostave. Podatki so zbrani po naših najboljših močeh, zato za točnost ne moremo jamčiti. Stroj za ostrenje orodij, rezkarjev, navojnih svedrov in spiralnih svedrov. Stroj je primerljiv z znamkami, kot so Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, Walter. Prav tako lahko pogledate valjčne ali ploskovne brusilne stroje, stružnice, obdelovalne centre in rezkalne stroje.

Stanje: rabljeno, Leto izdelave: 2005, Obdelovalna dimenzija: 3000 x 1600 x 180 mm Visokotlačna črpalka 60 KM / 45 kW Model E-60 Delovni tlak 4.130 BAR Poraba vode 4,69 litra/min. Programska oprema Watercad-CAM Samodejna optimizacija reza Lokacija zaloge: Stranka Iaedpjxgfbqefx Agtjt

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 32 t, delovna višina: 200 mm, model krmilnika: Siemens 840D, delovna dolžina: 2.150 mm, TEHNIČNI PODATKI Dolžina upogibanja: 2.150 mm Maksimalna višina upogiba: 200 mm Minimalna dolžina/širina med upogibi: 160–350 mm Pritisna sila: 32 t Isdoy D Ihwepfx Agteat PODROBNOSTI STROJA Krmiljenje: Siemens 840D Dimenzije in teža Dimenzije (D x Š x V): 8.500 x 7.000 x 2.850 mm Teža: 30.000 kg OPREMA Avtomatska menjava orodja Manipulator Obratni upogibni cikel Sistem za centriranje pločevine Dodatna zgornja orodja Sistem za nalaganje in razkladanje

Leto izdelave: 1993, stanje: delavnici obnovljeno (rabljeno), leto – 1993 / 2020 popolnoma obnovljen s sistemom PLC vodenja največji premer cevi: 100 mm debelina stene – 10 mm največja dolžina vleka cevi – 6000 / 12000 mm krivljenje s trnom do debeline stene cevi 4 mm; krivljenje brez trna od debeline stene 5,0 do 10 mm natančnost kota krivljenja ± 0,2 ° skupna priključna moč – 50 kW teža stroja pribl. 6 t Ijdsiau Uuepfx Agtjat

Stanje: rabljeno, CNC stroj za zobniško rezkanje GLEASON PFAUTER P60 Ijdjyuzggopfx Agtjat

Stanje: rabljeno, CNC stroj za rezkanje zobnikov GLEASON PFAUTER P60 Iedjyuzgaopfx Agtoat

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Helmerding stiskalnica Tip: KDH 315/2100/2 Pritiskalna sila 3.150 kN Višina hoda 40-200 mm Število hodov 20-100 1/min Nastavitev berana 120 mm Vgradna višina 500 mm Površina mize 2.000 x 1.200 mm Površina berana 2.000 x 1.100 mm Teža stroja 44.000 kg Helmerding valjčni podajalnik Tip: EWH 800/150 Širina traku 100 - 800 mm Debelina traku 0,5 - 6,0 mm Helmerding ravnalni stroj Isdpfxjy R Elye Agtjat Tip: R-70/800/9-S Širina traku 100 - 800 mm Debelina traku 0,5 - 5,0 mm Premer ravnalnih valjev 70 mm Število ravnalnih valjev 9 kos Helmerding odvijalna kolutnica Tip: HE-4/800/MOT/HYD Širina traku 100 - 800 mm Največja teža koluta 4.000 kg Notranji premer koluta 508 mm Zunanji premer koluta 1.000 - 1.600 mm

Leto izdelave: 2023, obratovalne ure: 5.027 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Ponujamo zelo dobro ohranjenega robotskega manipulatorja Halter CNC Automation Millstacker Premium 25 za CNC rezkalne stroje, letnik 2023. -- Zelo malo delovnih ur Prilagoditve, ki so bile izvedene po naročilu in odstopajo od serijske opreme: 1. Dodana individualna odlagalna pozicija (pri nas po toboganu v vodno kopel). Pri tej nastavitvi je lahko z neobdelanimi kosi opremljenih vseh 12 skladiščnih pozicij – pri odlaganju na mizo je to možno le pri 11 pozicijah. 2. Individualna prilagoditev smeri postavitve v magazinu. Tako je možno daljše/večje kose polagati vzdolž med palice, kadar vstavljanje preko diagonalnih kotov ni več mogoče. Iaodpfx Agsy Nmmijtet 3. Dodatno izdelan komplet daljših podpornih palic za varno pozicioniranje večjih kosov. V primeru vprašanj ali če potrebujete več informacij, nam pišite ali nas pokličite.

Stanje: novo, Leto izdelave: 2024, TP Turret Punch Presses Durma TP series turret punch presses enable you to achieve top-quality results thanks to precise and fast turret operation, enhanced hydraulics, and 3 automatic index stations. Featuring a movable table, part unloading bin, automatic clamps, CAD/CAM software, and a control unit, Durma turret punch presses are user-friendly. Automation systems increase both operator safety and productivity, minimizing downtime while maximizing safety. Punching force: 30 tons Working area: 3,000+R x 1,500 mm X-axis travel: 3,000+R mm (repositioning) Y-axis travel: 1,500 mm Y-axis speed: 60 m/min X-axis speed: 70 m/min Combined X+Y speed: 92 m/min Max. strokes per minute (1 mm steps, 1 mm sheet thickness): 1,100 1/min Max. strokes per minute (25 mm steps, 1 mm sheet thickness): 325 1/min Max. marking speed: 1,200 1/min Main cylinder stroke: 40 mm Max. punching stroke: 25 mm Max. cutting capacity with fixed tool station – steel: 6 mm Max. cutting capacity with fixed tool station – stainless steel: 3 mm Max. cutting capacity with index station – steel: 3 mm Max. cutting capacity with index station – stainless steel: 1.5 mm Tool changer (27 stations, without tools and holders): 11 x A-station fixed: 0.8–12.7 mm Iasdpfx Ageg Admfotet 11 x B-station fixed: 12.8–31.7 mm 2 x C-station fixed: 31.8–50.8 mm 1 x D-station fixed: 50.9–88.9 mm 3 x D-station index: 50.9–88.9 mm Positioning accuracy: +/- 0.1 mm Repeatability: +/- 0.05 mm Tool changer rotation speed: 22 rpm Auto-index rotation speed: 150 rpm Max. sheet weight: 200 kg Table height: 940 mm Air pressure: 6 bar Max. punching diameter (D-station): 88.9 mm Motor power: 7.5 kW Main dimensions: Height: 2,310 mm Width without light barriers: 6,300 mm Width with light barriers: 8,300 mm Length without light barriers: 6,650 mm Length with light barriers: 7,650 mm Weight: 19,500 kg

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), YASDA YBM Vi40 CNC Jig Boring Machine / Machining Center Impeccable condition of the machine Incl. accessories (see photos) For the full photo series: See attached PDF file (from page 4 onwards) TECHNICAL DATA Ijdpfspqx H Tsx Agtjat Travel Paths X-axis: 900 mm Y-axis: 500 mm Z-axis: 450 mm Distance from table surface to spindle nose: 100 to 550 mm Rotary Table Diameter: 400 mm Pallet load capacity: 200 kg Table surface configuration: 44 x M12 threaded holes C-axis: 360° Swivel axis (B-axis) movement range: ±110° Distance between center of swivel axis and rotary table: 0 mm Rotation axis (C-axis): 100 rpm Max. rotation of swivel axis: 20 rpm Motor for rotation axis: 4.2 kW Motor for swivel axis: 4.5 kW Spindle Type: SA40-24,000-18.5 Spindle speed range: 100 – 24,000 rpm Programming of spindle speed range: Direct input of a 5-digit S code Number of spindle speed ranges: 1 Type of spindle taper: HSK-63A Inner diameter of spindle bearing: 65 mm Rapid Traverse Speed: X, Y, Z axes: 20,000 mm/min Feed: X, Y, Z axes: Max. 5,000 mm/min C-axis: 100 rpm B-axis: 20 rpm Minimum input increment: 0.0001 mm/deg Automatic Tool Changer: 60 tools Tool selection method: Random access Tool shank type: HSK-63 A Max. tool diameter: 100 mm Max. tool diameter with adjacent tools: 70 mm Max. tool length: 250 mm Max. tool weight: 7 kg Tool balance grade: Within G2.5 Machine dimensions: 3,220 x 3,885 x 3,515 mm Machine weight: 15,000 kg No guarantee is given for the correctness, completeness, or timeliness of the information provided.

Leto izdelave: 2003, stanje: zelo dobro (rabljeno), Schneeberger DMR Gemini CNC Tool Grinding Machine TECHNICAL DATA Control: GE Fanuc 160, 5-axis simultaneous Software: Schneeberger Quinto Measuring System X, Y and Z axes: 0.1 μm A-axis: 0.0001° C-axis: 0.0001° Grinding Head Power: 15 kW Speed: 50 – 10,000 rpm Spindle nose: HSK 50 Max. grinding wheel diameter: 250 mm Max. number of grinding wheels: 6 Linear Axes X-axis, travel: 380 mm Feed rate: 20,000 mm/min Resolution: 0.0001 mm Ratio: 1:1 Power: 1.0 kW / 3 Nm Y-axis, travel: 300 mm Feed rate: 5,000 mm/min Resolution: 0.0001 mm Ratio: 24:4 Power: 1.6 kW / 8 Nm Z-axis, travel: 280 mm Feed rate: 20,000 mm/min Resolution: 0.0001 mm Ratio: 1:1 Power: 1.0 kW / 3 Nm Rotary Axes C-axis: 210° Speed: 72°/s Resolution: 0.0001° Power: 1.6 kW / 8 Nm C' axis: ±180° Speed: 90°/s Iasdpfx Aomqni Aogtot Resolution: 0.0001° Retraction: Hydraulic A-axis: ±360° Speed: 225°/s Resolution: 0.0001° Power: 1.0 kW Nose: ISO 50 Centre height: 210 mm Dimensions and Weight Length: 1,700 mm Depth: 2,270 mm Height: 2,260 mm Weight: 8,000 kg We assume no liability for the correctness, completeness or currentness of the information provided.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, CNC center za vrtanje plošč in samodejno vstavljanje moznikov Kombinirana vrtalna glava: - do 6 vertikalnih vreten - integrirana horizontalna vretena (tipična konfiguracija 3+3) Samodejno vstavljanje moznikov z integriranim lepilom Vgrajen sistem lepljenja Avtomatsko centralno mazanje CNC krmiljenje z zaslonom na dotik Čitalnik kod Iedpfx Aoy Rftdsgtjat Skupna moč: 6,7 kW

Stanje: rabljeno, Servo press brake SAFAN type SMK-P 50-2550 TS1 Press brake machine with 4-axis CNC control Serial no.: MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Max. tool installation height: 414 mm Iaodpfx Asxpqy Dogtst Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volts, 50 Hz, 9 kW - 4-axis CNC control SAFAN, software version 5.07 TS1; Y1 and Y2 axes for the press beam - 2-axis backgauge: X-axis for depth adjustment, R-axis for height adjustment - 2 stop fingers, manually adjustable laterally (Z1, Z2) - Press beam drive via 2 servo motors and belt drive - Infinitely adjustable working speed - Operation via electric foot switch and/or 2-hand control panel - 13 clamping holders for upper tool UKB system, type 50.571 (UKB system A) - Tool holder for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB system B) - Without press brake tools (new tooling from UKB costs approx. €3,600 net) - Displayed total operating hours: 8,120 h - Total strokes: 1,049,789 cycles Required space (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition