Almi Al 150 Hs nakup rabljenega (21.939)

Stanje: novo, Leto izdelave: 2026, Motor: 4 kW Voltages: 230V 3-phase, 400V 3-phase, or 460V 3-phase Belt speed: 45 m/s, 4300 rpm Belt dimensions: 100×2000 mm / 150×2000 mm Godpozzk Aiofx Abtobt Grinding diameter: Ø20–Ø114.3 mm Grinding angle: 20° – 90° Operation: Lever and manual wheel controls 2-in-1 Tube Notcher The new AL150HS features a belt speed of 45 m/s due to its unique gearbox. By opening the rear hatch, the tube notcher can also be used as a belt grinding machine, ideal for deburring polished profiles. The AL150HS can be operated either via two handwheels or a lever—both options are available on the machine. The AL150HS allows you to grind material from Ø20 to Ø114.3 mm. Both the cross support and the carriage with rotating clamp are infinitely adjustable. This means all tube profiles can be ground at any desired angle from 20° to 90°. With the AL150HS by ALMI, square, rectangular, and round tubes with varying wall thicknesses and all standard materials can be processed. The ALMI belt adjustment system makes it even easier to set the grinding belt using the supplied hex key. The belt can be quickly tensioned, and the grinding rollers can be changed within seconds. High-Speed Grinding Thanks to new developments, ALMI has achieved a grinding speed of 45 m/s with the updated AL150HS. This provides the grinding belt with a longer service life, as higher grinding speed reduces heat generation in the material, resulting in less discoloration and fine dust.

Stanje: novo, Leto izdelave: 2026, Motor: 4 kW Belt speed: 30 m/s, 2800 rpm Belt dimensions: 100×2000 mm / 150×2000 mm Grinding diameter: Ø20–Ø114.3 mm Grinding angle: 20–90º Operation: Lever and manual wheel operation Weight: 260 kg Easy to operate The AL150 can be operated with two handwheels or with a lever. Both options are available on the machine. With the AL150, you can grind material from Ø20 up to Ø114.3 mm. The cross support and the carriage with swivel clamp are continuously adjustable. This means that all pipe profiles can be ground at any desired angle from 20° to 90°. The AL150 from ALMI grinds square, rectangular, and round pipes with various wall thicknesses and is suitable for all common materials. The ALMI belt tensioning system makes adjusting the grinding belt with the supplied hex key even easier. The sanding belt can be quickly tensioned, and the grinding rollers can be changed within seconds. 2-in-1 tube grinder Gbsdozzkzxopfx Abtot The AL150 is equipped with a deburring table, making it easy to deburr pipes, which makes the tube grinder multifunctional.

Stanje: novo, Condition: new Delivery time: approx. 2 - 4 weeks after order Country of origin: Netherlands Price: €7,733 Leasing rate: €149.25 Bestseller 1 Grinding belt dimensions: 150 x 2,000 mm Pipe diameter: 20 - 114.3 mm Lever adjustment: 1 Handwheel adjustment: 1 Motor power: 4 kW Weight: 270 kg Gbedpfxewirqts Abtst The new AL150HS 2-in-1 machine: belt grinder and pipe notcher. High belt speed with an improved drive system at 45 m/s. High-speed benefits: less fine dust, reduced discoloration, 2-3x longer belt life. The AL150HS model can be operated either with two handwheels or with a lever—both options are available on the machine. With the AL150HS, you can notch material from Ø20 to Ø114.3. The support cross and the carriage with a rotatable clamp are infinitely adjustable, allowing all pipe profiles to be notched at any desired angle from 30° to 90°. The ALMI AL150HS grinds square, rectangular, and round pipes of various wall thicknesses and is suitable for all common materials. Thanks to the ALMI belt adjustment system, setting the grinding belt with the supplied hex key is now even easier. The grinding belt can be quickly tensioned, and the grinding roller can be changed in seconds. The pipe notcher is equipped with a deburring table. Includes: 5 pcs. grinding belts, 1 pc. grinding roller Ø 42.4 mm (Representative photo)

Stanje: novo, Condition: New Delivery time: approx. 2–4 weeks from order Country of origin: Netherlands Price: €6,352 Leasing rate: €122.59 Abrasive belt dimensions: 150 x 2,000 mm Pipe diameter: 20–114.3 mm Lever adjustment: 1 Handwheel adjustment: 1 Motor power: 4 kW Weight: 270 kg The AL150 model can be operated either with two handwheels or with a lever. Both options are available on the machine. With the AL150 you can notch material from Ø20 to Ø114.3 mm. The support cross and carriage with rotating clamp are infinitely adjustable. This allows all pipe profiles to be notched at any required angle from 30° to 90°. Godoynmqdjpfx Abtebt The ALMI AL150 machines out square, rectangular, and round pipes with various wall thicknesses and is suitable for all common materials. Thanks to the ALMI belt adjustment system, setting the abrasive belt with the supplied hex key is now even easier. The abrasive belt can be quickly tensioned, and the grinding rollers can be changed within seconds. The pipe notchers are equipped with a deburring table. Including 5 abrasive belts and 1 grinding roller Ø42.4 mm (Product image for reference)

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, ALMI AL-U za iztek cinka v ceveh z zunanjim premerom od Ø22 do Ø76 mm Orodje za izrez cevi za iztek cinka v ceveh z zunanjim premerom od Ø22 do Ø76 mm Gbjdezzk Dyepfx Abtst Za izrezovanje prezračevalnih rež v okrogle in pravokotne kovinske cevi od 22 mm zunanjega premera naprej Enostavna namestitev na steno Maks. debelina stene: 3 mm jeklo, 2,5 mm nerjavno jeklo, teža 7 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, ALMI stroj za izsekavanje cevi AL2 za cevi z zunanjim premerom Ø48,3 (1 1/2″) in Ø60,3 (2”) mm Stroj za izsekavanje cevi za cevi z zunanjim premerom Ø48,3 (1 1/2″) in Ø60,3 (2”) mm enostavna montaža na steno idealen za dvojne kotne spoje maks. debelina stene: 3 mm jeklo, 2,5 mm nerjavno jeklo, teža 15 kg Gbsdpfx Aozzk Dmjbtet

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, ALMI stroj za izrezovanje cevi AL1 za cevi z zunanjim premerom Ø26,9 (3/4″), Ø33,7 (1″) in Ø42,4 (1 ¼”) mm Gsdpfx Aozzk Dgobtsbt Stroj za izrezovanje cevi za cevi z zunanjim premerom Ø26,9 (3/4″), Ø33,7 (1″) in Ø42,4 (1 ¼”) mm enostavna montaža na steno idealno za dvojne kotne spoje maksimalna debelina stene: 3 mm jeklo, 2,5 mm nerjavno jeklo, teža 8 kg

Stanje: novo, Maximum sheet thickness: 5.0 mm Pipe diameter: 27.9 – 61.0 mm Motor: 400 Volt Total power requirement: 2.2 kW Machine weight: approx. 87.0 kg The AL1-2E electric tube notcher is started at the push of a button, with the notching tool running continuously. This allows you to process new workpieces continuously without having to restart the machine each time. With the electrically powered AL1-2E tube notcher, you can notch pipe outer diameters of Ø 26.9 (3/4”), Ø 33.7 (1”), Ø 42.4 (1 ¼"), Ø 48.3 (1 ½"), Ø 60.3 (2"). Do you frequently notch pipes? Then the electrically driven AL1-2E tube notcher with its 2.2 kW electric motor is exactly what you need. The motor is integrated with a special eccentric shaft that drives the notching tool. In addition, the motor is equipped with an on/off switch with zero-voltage release and a protective cover. Gedpfx Absxaardstjbt Features: - Electric-motor-driven pipe notching machine - For pipes 27.9 – 34.8 – 42.8 – 49.0 and 61.0 mm - Operating manual

Stanje: novo, Maximum sheet thickness: 5.0 mm Tube diameter: 27.9 – 61.0 mm Motor: 400 Volt Total power requirement: 2.2 kW Machine weight: approx. 93.0 kg The electric tube notcher AL1-2U is started at the push of a button, with the notcher running continuously. This allows you to process new parts continuously without having to restart the machine each time. Gedpfx Aboxaadmetsbt With the electrically powered AL1-2U tube notcher, you can notch external tube diameters of Ø 26.9 (3/4”), Ø 33.7 (1”), Ø 42.4 (1 ¼”), Ø 48.3 (1½”), Ø 60.3 (2”). Additionally, this notcher is suitable for producing downspout notches in round and rectangular metal tubes. You can notch tube outside diameters from ø 20.0 to 60.3 mm. Do you frequently notch tubes? Then the electrically driven AL1-2U notcher with its 2.2 kW electric motor is the right choice for you. The motor forms one unit with the special eccentric shaft that drives the notching tool. In addition, the motor is equipped with an on/off switch with zero-voltage release and a protective cover. Features: - Electric motor driven tube notching machine - Includes notching station for downspout cut-outs - For tubes 27.9, 34.8, 42.8, 49.0 and 61.0 mm - Operating manual included

Stanje: dober (rabljeno), Leto izdelave: 1998, Offer 24339 Technical Specifications: - Belt dimensions: 2000 x 100 mm - Surface grinding opening: 400 x 100 mm - Support vice – angle adjustable: 90° to 30° - Fine adjustment of support via hand lever - Belt speed: 30 m/sec - Contact wheel / grinding roller for approx. Ø 42 mm - Drive: 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H 1200 x D 1200 mm Gsdst Uzxnopfx Abtjbt - Weight approx. 225 kg - Contact rollers: 33.7, 42, 48 mm

Stanje: dober (rabljeno), Leto izdelave: 1996, Offer 24337 Technical Data: - Belt dimensions: 2000 x 100 mm - Surface grinding aperture: 400 x 100 mm - Adjustable support vise: 90° to 30° - Fine adjustment of support via hand lever - Belt speed: 30 m/sec - Contact wheel / grinding roller for approx. Ø 42 mm - Drive: 400 V / 2880 rpm / 3 kW Gbsdpfxjvbfh Ro Abtst - Space requirement approx.: W 700 x H 1200 x D 1200 mm - Weight approx.: 225 kg - Various contact rollers

Stanje: dober (rabljeno), Leto izdelave: 1995, Offer 24315 Technical Data: - Belt dimension: 2000 x 100 mm - Surface grinding opening: 400 x 100 mm - Support vice – angle adjustable: 90° - 30° - Fine adjustment of support via handwheels - Belt speed: 30 m/sec - Contact wheel / grinding roller diameter: Ø 42 mm Gedpjt Stfhjfx Abtobt - Drive: 400 V / 2880 rpm / 3 kW - Required space: approx. W 700 x H 1200 x D 1200 mm - Weight: approx. 225 kg - 10 contact grinding rollers approx. diameters: 10 + 18 + 22 + 24 mm - 28 + 33 + 36 + 48 + 60 + 68 mm

Stanje: novo, Stanje novo Dobavni rok približno 2–4 tedne od naročila Država izvora Nizozemska Cena 5104 € Leasing rata 98,51 € Premer cevi 3/4" 26,9 mm, 1" 33,7 mm, mm Maks. debelina stene ogljikovega jekla 5 mm Gedpfx Abjyui S Rotsbt Maks. debelina stene nerjavečega jekla 3 mm Teža 87 kg Z motornim izsekačem cevi AL1-2E lahko izsekavate cevi z zunanjimi premeri Ø 26,9 (3/4"), Ø 33,7 (1"), Ø 42,4 (1 1/4"), Ø 48,3 (1 1/2") in Ø 60,3 (2"). Pogosto izsekavate cevi? Potem je motorizirani izsekač cevi AL1-2E z 2,2 kW elektromotorjem prava rešitev za vas! Motor tvori enoto s posebno ekscentrično gredjo, ki poganja izsekovalno orodje. Poleg tega ima motor vgrajeno stikalo za vklop/izklop z zaščito pred izpadom napetosti in zaščitni pokrov. Prednosti na prvi pogled: visoka produktivnost, nizka investicija, enostavno in hitro upravljanje, več premerov takoj na voljo in idealen za dvojne kotne spoje.

Stanje: novo, Condition: new Delivery time: approx. 2 - 4 weeks from order Country of origin: Netherlands Price: €5,932 Lease rate: €114.49 Pipe diameter: 3/4" 26.9 mm, 1" 33.7 mm, mm Max. wall thickness for construction steel: 5 mm Max. wall thickness for stainless steel: 3 mm Weight: 93 kg With the AL1-2U pipe notcher, you can notch pipes with outside diameters of Ø 26.9 (3/4"), Ø 33.7 (1"), Ø 42.4 (1 1/4"), Ø 48.3 (1 1/2"), Ø 60.3 (2") and PIPES FOR ZINC OUTLETS WITH OUTSIDE DIAMETERS FROM Ø22 TO Ø76. Gsdpfeyui Sqox Abtobt Do you frequently notch pipes? Then the AL1-2U pipe notcher with a 2.2 kW electric motor is the right solution for you! The motor forms a single unit with the special eccentric shaft that drives the notching tool. Furthermore, the motor is equipped with an on/off switch with undervoltage protection and a safety cover. Advantages at a glance: high productivity, low investment, simple and quick operation, multiple diameters immediately available, and ideal for double corner joints.

Stanje: novo, Stanje novo Dobavni rok cca. 2–4 tedne od naročila Država izvora Nizozemska Gedpfx Abeyq Svdotobt Cena 811 € Premer cevi: 3/4" 26,9 mm, 1" 33,7 mm, mm Najv. debelina stene ogljikovega jekla: 3 mm Najv. debelina stene nerjavečega jekla: 2,5 mm Teža: 8 kg Z izsekovalcem cevi AL1 lahko izsekavate cevi z zunanjimi premeri Ø26,9 (3/4"), Ø33,7 (1") in Ø42,4 (1 1/4"). Ročno upravljane naprave so enostavne za uporabo na steni – z izsekovalci cevi ALMI je piljenje ali rezkanje cevi stvar preteklosti. Velika prednost v primerjavi z drugimi orodji je, da lahko z enim kompletom izsekate več premerov, ne da bi morali menjati dele. Prednosti na kratko: visoka produktivnost, nizka investicija, enostavno in hitro upravljanje, več premerov takoj na voljo ter idealno za dvojne kotne spoje.

Stanje: novo, Zustand neu Lieferzeit ca. 2 - 4 Wochen ab Auftrag Ursprungsland Niederlande Preis 1063 € Rohrdurchmesser 1 1/4" 42,4, 1 1/2" 48,3 mm Max. Wandstärke Baustahl 3 mm Max. Wandstärke Edelstahl 2.5 mm Gewicht 15 kg Gedpfeyq Su Tjx Abtobt Mit dem Rohrausklinker AL3 können Sie Rohre mit den Außendurchmessern Ø42.4 (1 1/4") und Ø48.3 (1 1/2") ausklinken. Die Geräte mit Handbedienung sind einfach an der Wand zu befestigen. Mit ALMI Rohrausklinkern gehört Feilen oder Fräsen von Rohren der Vergangenheit an. Der große Vorteil gegenüber anderen Ausklinkwerkzeugen ist, dass mit nur einem Satz mehrere Durchmesser ausgeklinkt werden können, ohne erst Teile wechseln zu müssen. Die Vorteile auf einen Blick: hohe Produktivität, geringe Investition, einfache und schnelle Bedienung, mehrere Durchmesser sofort verfügbar und ideal für doppelte Eckverbindungen.

Stanje: novo, Zustand neu Lieferzeit ca. 2 - 4 Wochen ab Auftrag Ursprungsland Niederlande Preis 979 € Rohrdurchmesser 1 1/2" 48,3 mm, 2" 60,3 mm Max. Wandstärke Baustahl 3 mm Max. Wandstärke Edelstahl 2,5 mm Gewicht 15 kg Gsdpjyq Su Hefx Abtebt Mit dem Rohrausklinker AL2 können Sie Rohre mit Außendurchmessern von Ø48,3 (1 1/2") und Ø60,3 (2") ausklinken. ALMI-Produkte durchlaufen eine strenge Qualitätskontrolle, bevor sie auf den Markt kommen. Im Gegensatz zu Stanzknickmaschinen mit separaten Hilfswerkzeugen ist der Rohrausklinker von ALMI jederzeit sofort erhältlich. Zudem liegt der Preis unter den Kosten des betreffenden Hilfsmittels einer solchen Maschine. Die Vorteile auf einen Blick: Hohe Produktivität, geringe Investition, einfache und schnelle Bedienung, mehrere Durchmesser sofort verfügbar und ideal für doppelte Eckverbindungen.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Complete robotic welding cell with rotary table and enclosure Robot: KUKA KR 150 R2700 extra Payload: 150 kg Reach: 2,090 mm Equipped with welding gun (Dalex, new in 2018) including cooling system (closed-circuit water cooling) A complete second welding gun (manufacturer: ARO) is included in the scope of delivery Dedicated cooling unit integrated in the system Gedpjnr E Ensfx Abtobt Automatic rotary table with 10-position indexing (currently set up as 5-position for ongoing production) Workstation for loading and unloading parts is well-lit and secured with light barriers System control via Siemens PLC, programmed by HS Automation Siemens operator panel for system operation mounted at the loading station on a swivel arm All components enclosed within a safety housing with security door. The installation can still be inspected under power.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, Certificirano po DGUV do: 09/2027, leto zadnje generalne obnove: 2026, skupna širina: 1.200 mm, skupna višina: 1.300 mm, vhodna frekvenca: 50 Hz, lastna masa: 2.000 kg, skupna masa: 2.000 kg, vrsta vhodnega toka: trifazni, električna varovalka: 63 A, Vrhunski spiralni mešalnik Kemper SP 150 AL z 2 posodami Mešalnik za največ 250 kg testa Priprava testa s pokrovom z 2 časovnima stikaloma in 2 prestavami Priključna napetost 400 V, vtič 63A-CEE Mere: 1200 x 1550 x 1300/2000 mm (Š x G x V) Rabljen stroj, prenovljen z garancijo + paket servisnih storitev Kakovost izpod rok specializiranega podjetja! Izkoristite več kot 35 let izkušenj! Možnosti: Gbodpfow S Sncjx Abtet Storitev dostave dodatne posode Pogodba o vzdrževanju Odkrijte naš svet pekovskih strojev!

Stanje: novo, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €28,450 Leasing rate: €543.40 Bending length: 1,550 mm Max. bending capacity – construction steel: 7 mm Max. sheet thickness without pre-bending at D=5x top roller: 7 mm Max. sheet thickness without pre-bending at D=1.5x top roller: 4.5 mm Max. sheet thickness with pre-bending at D=5x top roller: 4.5 mm Gbjdjyb Szhepfx Abtst Max. sheet thickness with pre-bending at D=1.5x top roller: 3.5 mm Top roller diameter: 150 mm Bottom roller diameter: 150 mm Side roller diameter: 130 mm Rolling speed: 1.5 / 6 m/min Motor power: 4 kW Length: 3,750 mm Width: 960 mm Height: 1,100 mm Weight: 2,500 kg 4 rollers Top roller driven by hydraulic motor and planetary gearbox, lower rollers driven by gear and cardan shaft Hydraulic adjustment of lower and side rollers Digital display for lower and side roller positions Hardened rollers Cone bending device Hydraulic release of top roller Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE directive OPTIONS: (Delivery time with options approx. 10 weeks) Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: Maximum sheet thickness is 50% of rated capacity Cone length must be max. 30% or more than 60% of roller length Hardened rollers are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €31,600 Leasing rate: €603.56 Bending length: 2,050 mm Max. bending capacity - mild steel: 6 mm Max. plate thickness without pre-bending at D=5x top roll: 6 mm Max. plate thickness without pre-bending at D=1.5x top roll: 4 mm Max. plate thickness with pre-bending at D=5x top roll: 4 mm Max. plate thickness with pre-bending at D=1.5x top roll: 3 mm Top roll diameter: 150 mm Lower roll diameter: 150 mm Side roll diameter: 130 mm Rolling speed: 1.5 / 6 m/min Motor power: 4 kW Length: 4,250 mm Width: 960 mm Height: 1,100 mm Weight: 2,800 kg 4 rolls Top roll driven by hydromotor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of the lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Movable control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Gbjdpfx Ajyb Szbobtot Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: Max. plate thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 131/04, skupna širina: 2.400 mm, skupna višina: 3.100 mm, skupna dolžina: 3.200 mm, vrsta vhodnega toka: trifazni, skupna masa: 3.000 kg, delovna širina: 1.500 mm, delovna višina: 180 mm, moč: 50 kW (67,98 KM), Storti obdelovalni stroj za les GSI/150-AL (2004). Polavtomatska proizvodna linija, za katero sta potrebna dva operaterja za vstavljanje lesa na dvojno dolgo mizo. Stroj omogoča proizvodnjo palet po standardih Združenega kraljestva (1200 x 1000 mm), evropskih palet (1200 x 800 mm) in palet z možnostjo dvosmernega dostopa. Gsdpfxeydm H De Abtsbt Cena ni navedena – sprejemamo ponudbe.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, used Kemper spiral mixer SP 150 AL, mobile, overhauled, for 150 kg flour, 2 timers (overhauled), with 1 stainless steel bowl, additional bowl available on request, stainless steel spiral, newly painted, new electrics, new bearings, new V-belts, No. 6726916/610047, 400 V, 50 A, 50 Hz Gsdpfeukgumjx Abtjbt

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2005, skupna dolžina: 10.000 mm, CNC 5000 control with 17-inch color TFT touchscreen. - Automatic cutting via rotary shear - Double set of hydraulic clamps for sheet metal holding (short and long) Upper beam with water bending groove, oil filling, fastening and leveling materials, safety stop rail along the full machine length, emergency stop integrated in foot pedal for the upper beam and folding beam, second foot pedal for two-person operation, upper beam safety device, and two short part holding fingers. The machine is professionally repaired, overhauled, and cleaned by a specialist and is fully operational. A functional test will be performed. Sheet width: 10,000 mm Steel sheet thickness: 1.5 mm Aluminum sheet thickness: 2.5 mm Stainless steel sheet (VA) thickness: 1.5 mm Back gauge width: 150 - 1150 mm Color: light blue/light grey Total power required: 400 V Required space: 12,500 x (2,367 x 700) + fence 2,070 mm Insertion depth: 1,150 mm Machine weight: 18,500 kg Positioning speed: 250 mm/sec Gsdpfx Abownyu Dstjbt Number of uprights: 8 pcs Number of clamping jaws: 8 Bending angle: 145 degrees

Stanje: novo, Condition: New Delivery time: Approx. 2 weeks from order Country of origin: Netherlands Price: €4,785 Abrasive belt dimensions: 100 x 2,000 mm Tube diameter: 20 - 76.1 mm Manual lever adjustment: 1 Handwheel adjustment: 1 Motor power: 3 kW Weight: 220 kg The AL100U-02 model can be operated either with two handwheels or with a lever. Both options are available on the machine. With the AL100 U-02 model, you can notch material from Ø20 to Ø76 mm. The support cross and carriage with rotating clamp are continuously adjustable. This allows you to notch all tube profiles at any desired angle from 30° to 90°. The ALMI AL100U-02 is capable of notching square, rectangular, and round tubes with various wall thicknesses and is suitable for all common materials. Thanks to the ALMI belt adjustment system, setting the abrasive belt using the supplied hex key is now even easier. The abrasive belt can be quickly tensioned, and changing the grinding rollers takes only a few seconds. All tube notchers are equipped with a deburring table. Gjdpfx Abswir Dmstebt Incl. 5 pcs. sanding belts, 1 pc. grinding roller Ø 42.4 mm