Abus Ls / 4000 Mm X 250 Kg nakup rabljenega (110.645)

Stanje: novo, Load capacity in kg: 250 kg Reach: 4000 mm Height: 3425 mm (underside of jib) Total column height: 4,025 mm Slewing range: 270 degrees Total weight: approx. 375 kg Description: - Load capacity: 250 kg - Outreach: 4000 mm - Overall height: 4025 mm - Crane painted in RAL 1007 daffodil yellow - Design standard: DIN 15018 - Crane classification: H2/B2 - Operating environment: indoor use - Size/boom profile: LS36 / Form C 110x90 - Height to underside of jib: 3425 mm - Operating voltage: 3/PE~50 Hz 400 V - Control type: direct control - Protection class: IP55 - Slewing range (nominal): 270° - Manual slewing Including: - Anchor rods, size LS 36 - Comprising 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Foundation fixation, incl. accessories Electric chain hoist: - Chain hoist type: GM 2 250.6-1, single strand - Painted in RAL 5017 - Traffic blue - Lifting capacity: 250 kg Itodpfx Asxak D Reb Aeg - Hook path: 4000 mm - Highest hook position: 3034 mm - Calculation basis: FEM 9.901 - Mechanism group: 2m / M5 - Lifting, 2-speed (pole-changing): 1.5 / 6 m/min - Lifting motor power: 0.09 / 0.35 kW - Duty cycle: 60% ED Image shows a similar crane system.

Stanje: novo, Load capacity: 500 kg Outreach: 4000 mm Height: 3425 mm (underside of jib) Total column height: 4215 mm Slewing range: 270 degrees Total weight: approx. 550 kg Description: - Power supply to the trolley - Festoon cable system, cable sag approx. 800 mm - Floor operation via pendant control Including: - ABUS electric chain hoist - Chain hoist type GM 2 500.4-2, 2-fall - Painted in RAL 5017 traffic blue - Load capacity: 500 kg - Hook travel: 3000 mm - Maximum hook position: 2965 mm - Calculated according to FEM 9.901 Itodpfexak H Eox Ab Aog - Mechanism group 2m / M5 - Lifting, 2-speed (pole-changing), 1 / 4 m/min - Lifting motor power: 0.09 / 0.35 kW - Duty cycle: 60% ED - Switching cycles: 360 c/h Overload protection The crane system meets the requirements of the Machinery Directive 2006/42/EC and the currently applicable accident prevention regulations DGUV Regulation 52 (formerly BGV D6). Including: - Anchor rod set L200 (type LS 200) - Consists of 8 pcs. M27 mm x 800 mm with 1 steel template (500/8) - For foundation fixing, including grouting accessories To align the slewing crane, an installation gap between the column base and the building floor must be provided. The installation gap is to be grouted by the customer after approx. 4 weeks of crane operation. Image shows a similar crane system.

Stanje: novo, Load capacity in kg: 1000 kg Reach: 4000 mm Height: 3000 mm (underside of jib) Total column height: 3790 mm Slewing range: 270 degrees Itodjxak Hxopfx Ab Aeg Total weight: approx. 525 kg Description: - Festoon cable power supply for trolley - Drag chain, cable sag approx. 800 mm - Operation from floor using pendant control Including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, double-strand - Painted in RAL 5017 traffic blue - Lifting capacity 1 t - Hook travel 3000 mm - Maximum hook position 2442 mm - Design basis FEM 9.901 - Mechanism group 2m / M5 - Lifting, 2-speed (pole-switchable) 1.3 / 5 m/min - Lifting power 0.22 / 0.9 kW - Duty cycle 60% ED - Switching frequency 360 c/h Overload protection The crane system complies with the requirements of Machinery Directive 2006/42/EC as well as current UVV regulations DGUV Regulation 52 (formerly BGV D6). Included: - Anchor rods L200 (set) size LS 200 - Consisting of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - For foundation anchoring, including grouting accessories For alignment of the slewing jib crane, a mounting gap between the column base and the building floor must be provided. The mounting gap is to be grouted by the customer after approx. 4 weeks of crane operation. Illustration shows a similar crane system.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, skupna višina: 3.500 mm, skupna dolžina: 15.000 mm, skupna širina: 6.500 mm, nosilnost: 100 kg, Used ABUS and Yale single-girder crane runway system EHB – HB110S profile – incl. GM2 100 electric trolley For sale: a used ABUS single-girder crane runway system (EHB) equipped with HB110S crane runway profiles. The system is suitable for light to medium-duty internal lifting and transport applications in workshops, production environments and warehouses. Technical specifications: Manufacturer: ABUS Kransysteme / Yale Year of manufacture: 2023 and 2021 Type: EHB single-girder runway crane Profile type: HB110S (500kg capacity) Iodpsyyq Ilsfx Ab Aetg Fitted with current collectors. Available runway lengths: 12,250 mm 14,000 mm 12,250 mm 14,750 mm 15,750 mm Cross beams / suspension beams: Length: 6,500 mm Quantity: 5 units (each length has 1 suspension beam and chain hoist) Lifting equipment: ABUS electric trolley Type: GM2 100 The system is suitable for expansion or integration into an existing EHB suspension crane installation. Ideal for efficient internal transport of materials and components within a production area. Delivery: As shown / dismantled from operation including crane documentation, drawings and photos. For more information, additional photos or a quotation, please feel free to contact us. Price per unit: from € 3,250.00 3 x Abus, 2 x Yale. Also available as a lot: 5 units.

Stanje: rabljeno, Wall-mounted slewing crane DEMAG type KBK 2 Demag serial no. jib arm: KBK-982 040 44 Demag serial no. wall bracket: 85104044 Year of manufacture: 2000 Load capacity: 500 kg Jib outreach: 4000 mm Slewing range: 270° Wall mounting plate: 1170 x 440 mm Height underside jib to top edge wall bracket: 1000 mm Flange plate wall bracket to centre of pin: 270 mm Total length flange plate wall bracket to jib tip: 4330 mm - Jib profile C-profile rail DEMAG KBK 2 - Trolley for C-profile rail DEMAG KBK 2 - Original paint, yellow Dead weight: 170 kg In very good condition Itedjtqwrvopfx Ab Ajg Price without chain hoist – Chain hoist or crane also available in the shop.

Stanje: novo, x-axis travel: 4000 mm y-axis travel: 2000 mm z-axis travel: 250 mm Pump output for flushing: 37 kW Control: Siemens PLC touch screen, direct import of usable DXF files Max. output pressure: 5500 bar Abrasive delivery system for waterjet cutting machines – fill weight 350 kg OMAX vacuum sensor for monitoring abrasive feed to the nozzle Sensor for monitoring pump pressure In waterjet cutting, water is pressurized up to 5500 bar. Depending on the requirements and workpiece, it is then forced through a nozzle with a diameter between 0.01 and 0.08 mm. Since the waterjet process works without heat input, material deformation is avoided. By adding abrasive, waterjet cutting achieves maximum precision with tolerances of +/- 0.01 mm. Our flexible production enables both vertical and bevel cuts. We are happy to receive your custom CAD files. Waterjet technology provides significant advantages for industry, trade, and custom prototyping. It is also environmentally friendly as waterjet cutting operates dust-free and steam-free, while also conserving material. Waterjet cutting: example gallery What already sounds impressive in theory is even more striking in the finished product. We have compiled a selection of images to demonstrate our capabilities in waterjet cutting. Click through our sample gallery to see what is possible with this modern processing technology. Waterjet will find the ideal solution for your application! Advantages - No deformation in the cutting area - Cutting without thermal input - Material saving - High precision: +/- 0.1 mm - Cutting area: x = 4010 mm; y = 2010 mm; z = 250 mm - Flexible manufacturing - Vertical and bevel cuts - Acceptance of your CAD data formats: DXF, DWG, IGES, STP, STEP, PRT, JPT, JAM - Environmentally friendly, dust- and steam-free We cut everything! Itsdpfed Ab Uuex Ab Ajg All materials shaped, including: - Aluminium - Steel - Brass - Copper & bronze - Other precious metals - Glass - Granite & marble - Tiles - composites - Foam material cuts - Rubber - Plastics - Plexiglas Optional: Oil cooler                                                                € 10,725.00 Water filtration system                                              € 1,430.00 Sludge extraction system                                            € 10,725.00 Professional water treatment system                        € 10,725.00 An oil cooler must be present during commissioning!!! Operation for longer than 1 hour is only possible with an oil cooler.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, skupna masa: 37.700 kg, skupna višina: 2.927 mm, skupna dolžina: 29.100 mm, skupna širina: 6.344 mm, nosilnost: 40.000 kg, moč: 32 kW (43,51 KM), glavna hitrost dviga: 8.000 mm/min, fina hitrost dviga: 1.300 mm/s, delovna višina: 15.000 mm, prosta razpetina: 28.800 mm, Oprema: dokumentacija / priročnik, Lemmens / Abus double girder overhead crane with Abus GM7000 hoist, year of manufacture 2008, lifting capacity 40,000 KG, available lifting height 15 meters, equipped with Abus joystick control and ramshorn hook, well maintained, extensively documented, will be removed from service in working condition. Speeds: - Crane travel: 6.0 - 60.0 m/min (frequency controlled) - Trolley travel: 7.5 / 30 m/min - Hoisting/lowering: 1.3 - 8.0 m/min (frequency controlled) Required clearance above crane rail: 2,142 mm Isdpfx Ajx A A T Asb Astg Crane will be dismantled for road transport. Transport must be arranged by the buyer (2x trucks for 29-meter length, 1x truck for hoist and end carriages). A total of 8 identical cranes will become available, the first units will be dismantled in week 51. Keywords: overhead crane, bridge crane, cranes, workshop crane, warehouse crane, hoist, gantry crane, Abus, Demag, Kone

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, skupna višina: 5.050 mm, skupna dolžina: 5.000 mm, nosilnost: 500 kg, globina grla: 4.000 mm, delovna višina: 4.000 mm, Oprema: dokumentacija / priročnik, Nerabljen konzolni stebrni žerjav. Doseg: 400 cm. Skupna višina: 505 cm. Nosilnost: 500 kg. Zasukljiv za 270 stopinj. Dvigalo z žično vrvjo in lahko vodljivim vozičkom. Vse vključeno, vključno z vijaki in kemičnimi sideri za betonska tla. Žerjav je potrebno samo sestaviti in je nato takoj pripravljen za uporabo. Popolnoma nerabljen, letnik 2022, vendar nikoli razpakiran. CE dokumenti itd. na voljo. Iodpsy Ecp Esfx Ab Aetg Prevoz je možno organizirati. Na voljo tudi druge velikosti stebrnih konzolnih žerjavov: 500 kg, doseg 600 cm, višina 750 cm. 1200 kg, doseg 500 cm, višina 750 cm. 1600 kg, doseg 500 cm, približno 700 cm višine.

Stanje: dober (rabljeno), Leto izdelave: 1986, Škarjasta dvižna miza, škarjasta dvižna ploščad, enostavna škarjasta miza, hidravlična dvižna ploščad -Škarjasta dvižna miza: z tehtalno enoto in premičnim podvozjem, vsaka brez krmiljenja in prikazovalnika teže -Nosilnost: 2000 kg Iedpfxjw Hyfms Ab Ajtg -Platforma: 4000 x 1420 mm -Mere v spuščeni legi: višina 430/675 mm -Mere v dvignjeni legi: višina 1145/1390 mm -Premični podvozje: razmak koles za tirnico 1100 mm -Transportne dimenzije: 1420/4000/V675 mm -Teža: 2600 kg

Stanje: rabljeno, Wall-mounted slewing crane with hoist, slewing drive, and trolley ABUS Wall-Mounted Slewing Crane Type VW (3200kg x 6250mm) Serial No. 152 B8-16589596-0010 Year of manufacture: 2014 Capacity: 3200 kg Slewing range: 180° Projection (boom tip to wall): approx. 6640 mm Minimum projection (crane hook to wall): approx. 1450 mm Maximum projection (crane hook to wall): approx. 6250 mm Trolley travel: approx. 4800 mm Hook distance from boom tip: approx. 400 mm Distance from top edge of slewing motor to crane hook: approx. 1500 mm Boom length without wall bracket (slewing bearing): 6530 mm Overall height with wall bracket (slewing bearing) and additions: 2590 mm (total height) - Boom profile: double-T steel (height 600 x width 220 mm) - Electrically slewed boom via geared motor (2 speeds) - Slewing via electric drive with end and preliminary limit switches Itedpfxowzmi Io Ab Asg - Slewing angle end positions with electric end and pre-limit switches - Paint finish (ABUS yellow - original paint) - 2 wall flanges 340 x 280 mm, each with 6 holes Ø 27 mm - Mounting surface for wall flanges W x H = 340 x 2500 mm Very good condition Hoist, Electric Wire Rope Hoist Trolley ABUS Type GM 800.3200H-202.41 6000.4.E100.20 Serial No. 250 B8-16589596-0010 Year of manufacture: 2014 Load capacity: 3200 kg Reeving: 4/1 Lifting height max.: 6 meters Lifting speed: 5 m/min Creep lifting speed: 0.8 m/min Trolley travel speed: approx. 4.5 and 19 m/min - Controlled via radio remote control and emergency operation via pendant cable - Trolley travel with electric drive, with end and preliminary limit switches - Approx. 20 operating hours - Last inspection April 2024 at 19 operating hours Weight of wire rope hoist: 250 kg Space required for transport (L x W x H): 6640 x 1400 x 2470 mm Total weight boom with wire rope hoist: 1500 kg Very good condition

Stanje: zelo dobro (rabljeno), Heavy-duty wooden pallets with 3 runners Accessible from all four sides Length: 1680 mm Width: 1250 mm Board thickness: 45 mm Weight: 82.5 kg Several units available Iodpsl Uvv Tofx Ab Astg

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 001491U, na prodaj Ijdpfx Abew I N T Us Astg Enonadstropni mostni žerjav pribl. 7.550 mm x 500 kg

Stanje: rabljeno, številka stroja/vozila: 001490U, naprodaj Ijdjw I Rrxjpfx Ab Astg Enonostni mostni žerjav ± 8.900 mm x 500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 37.000 mm, skupna širina: 4.000 mm, skupna višina: 3.750 mm, delovna višina: 500 mm, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Lisec IG Line 4000 x 2500 mm (2001/2007), left/right, for triple-glazed units, models as per Lisec model catalogue and 4-sided stepped units: - RTVN-32/25WE, washing machine infeed (3.2 m length), year 2007 (!) Ijdsy Sv Sgopfx Ab Astg - RTL-25VN, washing machine with 6 brushes for Low-E, including 1 hot water tank, 1 sand filter, and 1 blower, year 2007 (!) - RTVN-16/25ST, washing machine outfeed (1.6 m length), year 2007 (!) - RSVN-38/25A, frame setting zone, year 2001 - RTVN-15/25MZ, measuring zone for gas press, year 2001 - RTVN-11/25ST, infeed conveyor for gas press (or extension for measuring zone), year 2001 - FPS-36/25U2T, argon gas press, year 2001 - RTVN-16/25ST, gas press outfeed 1, year 2001 - RTVN-16/25ST, gas press outfeed 2, year 2001 - APKV-25/2, 2-lane cork applicator, year 2001 - RTVN-15/25VFE, sealing line infeed with glass and frame measuring device as well as barcode reader for special shapes, year 2001 - VFL-1DS/25, sealing robot, including options for triple-glazed units (2 sealing cycles), 4-sided stepped units (bottom 0–50 mm, front, rear, and top 0–140 mm) as well as special shapes as per the Lisec specials catalogue, Beckhoff PC, Lenze servo motors and controllers, year 2001 - DOS-1PUD + SID, material dosing for PU (base 2 x 200 liters, liquid hardener 200 liters) and SI (base 200 liters, hardener 20 liters), year 2001 All machines were fully functional until dismantling and are now available from stock in Hofkirchen, Austria and from stock in Oroshaza, Hungary.

Leto izdelave: 2009, stanje: dober (rabljeno), Tirni voz, platformni voziček, transportni voziček za težke tovore, transportni voziček, voziček za težke tovore, električni težki tirni voziček, tirni voziček, prikolica -Proizvajalec: Seacom, tirni voziček z pogonom -Tip: GWN 40t -Povečanje mase: dva tirna vozička v sklopu do 80t z ID36864 -Platforma: 4000 x 2500 mm Iedeyam H Aepfx Ab Ajtg -Nosilnost: 40.000 kg -Pogon: z električnim reduktorskim motorjem -Tirna širina: 1500 mm (1420/1580) -Širina kolesne steze: 80 mm -Skupne dimenzije: 4060/2500/H770 mm -Lastna teža: 2400 kg

Stanje: zelo dobro (rabljeno), Transportni valji, valji za transportne trakove, rezervni valji, transportni trak, valjčna proga, nosilni valji - Valji za transportne trakove: transportni valji premera 40 mm - Transportna širina: 250 mm - Namestitev: enostransko, kroglični ležaji, glejte fotografije - Količina: na voljo 8 transportnih valjev - Cena: na kos Itedpfx Aoxyf N Ijb Aog - Dimenzije: 395/70/V70 mm - Teža: 3,2 kg/kos.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 37.000 mm, skupna širina: 4.000 mm, skupna višina: 3.750 mm, delovna višina: 500 mm, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Lisec insulating glass line 4000 x 2500 mm (1990/2001), left/right: - RTV-27/25, inlet extension for washing machine, year of manufacture 1990 - RTV-38/25WE, washing machine inlet with glass thickness measurement and automatic low-E detection, year of manufacture 1990 - VHW-25V8, washing machine with 8 brushes for low-E, including 2 sand filters, 2 hot water tanks and blower, year of manufacture 1990 - RTVN-32/25ST, washing machine outlet, year of manufacture 2001 - RSVN-38/25A, frame assembly station, year of manufacture 2001 - RTVN-15/25MZ, measuring zone for gas filling press, year of manufacture 2001 - RTVN-11/25ST, press inlet (or extension for measuring zone), year of manufacture 2001 - FPS-36/25U2T, gas filling press for Argon, year of manufacture 2001 - RTVN-16/25ST, outlet 1 gas filling press, year of manufacture 2001 Iedjy Sv Twspfx Ab Aotg - RTVN-16/25ST, outlet 1 gas filling press, year of manufacture 2001 - APKV-25/2, 2-track cork applicator, year of manufacture 2001 - RTVN-15/25VFE, sealing line infeed, with glass and frame scanning as well as special shapes barcode reader, year of manufacture 2001 - VFL-1DS/25, automatic sealing system, including options for triple units (2 sealing passes), stepped units (bottom 0-50 mm, front, rear and top 0-140 mm), and special shapes in accordance with Lisec special shape catalogue, Beckhoff PC, year of manufacture 2001 - DOS-1PUD + SID, material dosing for PU (base 2 x 200 litres, liquid hardener 200 litres) and SI (base 200 litres, hardener 20 litres), year of manufacture 2001 Available now from our warehouse in Hofkirchen/Austria

Stanje: dober (rabljeno), Included in the scope of delivery: 01x Shelf connector, used Material color: Sendzimir galvanized L-profile dimensions: (see below) 298 x 81 mm (4 round holes, Ø 9 mm) 250 x 30 mm (one slotted hole) Center-to-center round hole: 278 | 50 mm Rack spacing: approx. 250 mm Weight: approx. 0.600 kg / piece 04x Hexagon bolts, M8 x 20, grade 8.8 04x Hexagon nuts, M8 04x Washers, M8 Isdpfx Absi Dtcns Aetg General information about the item: This item is only available for pickup. If transport or shipping of this item is desired, additional costs will be incurred, which can be requested from us separately and will depend on the delivery location and order volume.

Stanje: novo, Mezzanine Platform 4,000 x 10,000 mm, Load Capacity 500 kg/m² Scope of delivery includes: 4 columns, single-sided 100 x 100 x 3 mm 2 columns, double-sided 100 x 100 x 3 mm 4 main beams, C-profile C+300 x 3 x 3,990 mm 10 cross beams, Sigma profile S+300 x 2 x 4,800 mm 20 mounting brackets 3 cross braces 18 chipboard panels P6, 3,000 x 850 x 38 mm, lower side white, upper side natural incl. fastening material incl. load capacity signs Dimensions, Technical Data Steel structure: 4,000 x 10,000 mm Floor area: approx. 40 sq m Deck surface height: up to 3,500 mm (freely selectable) (other heights on request) Clear height below structure: deck surface minus 338 mm Load capacity: 500 kg/m² Columns: 100 x 100 x 3 mm Main beams: C-profiles C+300 x 3 mm Cross beams: Sigma profiles S+300 x 2 mm Decking: 38 mm chipboard, one side white Isdpfxjd Hl Nis Ab Aotg Columns available in the following standard RAL colours: RAL 7035, light grey RAL 7016, anthracite grey RAL 3000, flame red RAL 5003, sapphire blue Other colours on request! Accessories such as stairs, railings, etc. are not included in the offer but can be supplied at an extra charge (prices on request).

Stanje: novo, Mezzanine Platform 8,000 x 5,000 mm, Load Capacity 500 kg/m² Dimensions / Technical Specifications Steel Structure Dimensions: 8,000 x 5,000 mm Floor Area Dimensions: 8,000 x 5,000 mm Usable Floor Area: approx. 40 m² Top Edge of Floor Surface Height: up to 3,500 mm (freely selectable) Clear Height Underneath: Top edge minus 338 mm Net Load Capacity: 500 kg/m² evenly distributed load Scope of Delivery Includes: 6 steel tube uprights, 100 x 100 x 3 mm 4 main beams C+300 x 3 x 3,990 mm (perforated) 9 cross beams S+300 x 2 x 4,800 mm (closed) 18 mounting brackets 3 cross braces 18 particle boards, P6, 3,000 x 850 x 38 mm, underside white, top side natural incl. fastening material incl. load capacity signage Uprights available in the following standard RAL colours: Ral 7035, light grey Ral 7016, anthracite grey Ral 3000, flame red Ral 5003, sapphire blue (Other colours available upon request!) Main and cross beams are galvanized We also manufacture mezzanine platforms to custom dimensions. Prices upon request! Accessories, such as stairs, railings, etc., are not included in the scope of delivery. These can be supplied at an additional cost (prices upon request) Our Range of Services (prices upon request): Assembly and installation Please observe our general assembly conditions Racking Inspection Iedped Htr Hjfx Ab Astg Rack inspection according to DIN EN 15635 performed in accordance with BGR 234 visual inspection requirements for all racking systems Delivery with our own vehicle fleet (unloading not included)

Stanje: novo, Mezzanine Platform 16,000 x 5,000 mm, Load Capacity 500 kg/m² Dimensions / Technical Data Steel Structure Dimensions: 16,000 x 5,000 mm Maximum Floor Area Dimensions: 16,000 x 5,000 mm Usable Floor Area: approx. 80 m² Top Edge of Floor Height: up to 3,500 mm (freely selectable) Itsdpfjd Htr Tjx Ab Aeg Clear Height Below Structure: top edge minus 338 mm Net Load Capacity: 500 kg/m² evenly distributed load Scope of Delivery Includes: 10 columns, one-sided 100 x 100 x 3 mm 8 main beams C+300 x 3 mm, L = 3,990 mm 18 cross beams S+300 x 2 mm, L = 4,800 mm 36 mounting brackets 4 cross braces 33 chipboard panels P6, 3,000 x 850 x 38 mm, underside white, top surface natural incl. fastening material incl. load rating signs Columns available in the following standard RAL colors: Ral 7035 light grey Ral 7016 anthracite grey Ral 3000 flame red Ral 5003 sapphire blue (other colors available upon request) Main and cross beams galvanized Accessories, such as stairs, railings, etc., are not included in the scope of delivery. These can be supplied at an additional cost (prices on request). Our Services at a Glance: (prices on request) Assembly/Installation Please observe our general assembly terms and conditions. Racking Inspection Racking inspections according to DIN EN 15635, carried out in accordance with BGR 234 requirements for visual inspection of all racking systems Delivery with our own fleet (unloading not included)

Stanje: novo, skupna dolžina: 5.000 mm, skupna višina: 3.000 mm, skupna širina: 4.000 mm, nosilnost: 500 kg, Mezzanine platform 4,000 x 5,000 mm, load capacity 500 kg / m² Itodpsd Hl D Dofx Ab Aog Scope of delivery includes: - 4 columns, one-sided, 100 x 100 x 3 mm - 2 main beams C+300 x 3 x 3,990 mm (perforated) - 5 cross beams S+300 x 2 x 4,800 mm (closed) - 10 mounting brackets - 2 cross braces - 9 chipboards P6, 3,000 x 850 x 38 mm, underside white, top side natural Incl. fastening material Incl. load capacity signs Dimensions, technical data: - Steel construction: 4,000 x 5,000 mm - Floor area: approx. 20 sqm - Height of top edge of flooring: freely selectable up to 3,500 mm (other heights on request) - Clear height underneath: top edge minus 338 mm - Load capacity: 500 kg / m² - Columns: 100 x 100 x 3 mm - Main beams: C-profiles C+300 x 3 mm (perforated) - Cross beams: Sigma-profiles S+300 x 2 mm (closed) - Flooring: 38 mm chipboard, one side white, P6 Columns available in the following standard RAL colours: - RAL 7035, light grey - RAL 7016, anthracite grey - RAL 3000, flame red - RAL 5003, sapphire blue Other colours on request! Accessories such as staircase, railings, etc. are not included in the scope of delivery. These accessories can be supplied for an additional charge.

Stanje: novo, skupna dolžina: 12.000 mm, skupna višina: 3.000 mm, skupna širina: 5.000 mm, nosilnost: 500 kg, Mezzanine platform 12,000 x 5,000 mm, load capacity 500 kg/m² Dimensions / Technical Specifications: Steel structure dimensions: 12,000 x 5,000 mm Floor area dimensions: 12,000 x 5,000 mm Usable floor area: approx. 60 m² Top edge of finished floor height: up to 3,500 mm (individually selectable) Clear height below structure: Top edge minus 338 mm Net load capacity: 500 kg/m² evenly distributed load Scope of delivery includes: 8 columns, one-sided 100 x 100 x 3 mm 6 main beams C+300 x 3 mm, L = 3,990 mm (perforated) 13 cross beams S+300 x 2 mm, L = 4,800 mm (closed) 26 mounting brackets 3 cross bracing sets 24 chipboards P6, 3000 x 850 x 38 mm, bottom white, top natural finish Including all fastening materials Including load capacity signage Ijdpfxjd Htr Rs Ab Astg Columns available in the following standard RAL colours: - RAL 7035 light grey - RAL 7016 anthracite grey - RAL 3000 flame red - RAL 5003 sapphire blue (other RAL colours available on request) Main and cross beams galvanized We also manufacture mezzanine platforms to any other required dimensions. Prices on request. Accessories such as stairs, handrails, etc. are not included in the standard scope of delivery. These can be supplied at additional cost (prices on request). Our range of services: (prices on request) Assembly and installation Please observe our general assembly conditions Racking inspection Racking inspection in accordance with DIN EN 15635 performed to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (offloading not included)

Stanje: novo, Mezzanine Platform 4,000 x 15,000 mm, Load Capacity 500 kg/m² Scope of delivery includes: - 4 uprights, single-sided, 100 x 100 x 3 mm - 4 uprights, double-sided, 100 x 100 x 3 mm - 6 main beams, C+300 x 3 x 4,190 mm - 15 cross beams, S+300 x 2 x 4,800 mm - 30 mounting brackets Itjdsd Htryepfx Ab Ajg - 4 cross braces - 27 chipboard panels, P6, 3000 x 850 x 38 mm, underside white, topside natural - Including fastening materials - Including load capacity signage Dimensions & Technical Data Steel construction: 4,000 x 15,000 mm Floor area: approx. 60 sqm Top edge floor covering: up to 3,500 mm, freely selectable (other heights on request) Clear height underside: top edge minus 338 mm Load capacity: 500 kg/m² Uprights: 100 x 100 x 3 mm Main beams: C-section, C+300 x 3 mm Cross beams: sigma section, S+300 x 2 mm Floor covering: 38 mm chipboard, one side white Uprights available in standard colours: - RAL 7035, light grey - RAL 7016, anthracite grey - RAL 3000, flame red - RAL 5003, sapphire blue Other colours available on request. Accessories such as stairs, railings etc. are not included in the scope of supply. These can be supplied at extra cost (prices on request). Our Services at a Glance: (Prices on request) - Assembly and installation (please observe our general assembly conditions) - Racking inspection in accordance with DIN EN 15635, carried out according to BGR 234 requirements for visual inspection of all racking systems - Delivery with our own fleet (without unloading)

Stanje: dober (rabljeno), Obseg dobave vključuje: 01x CS-profil, rabljeno Barva materiala: sendzimir pocinkano Skupna dolžina: 5.550 mm Dimenzija profila: CS 250 x 50 x 40 mm Iedpfx Asx R Ambeb Aetg Teža / kos: ca. 45,00 kg Debelina materiala: ca. 2,5 mm Vaše kontaktne osebe v našem podjetju: G.: Andre Evering G.: Mario Klöver G.: Falk Deutsch Splošne informacije o izdelku: Ta artikel je na voljo le za osebni prevzem. Dodatni prevoz ali pošiljanje tega artikla je povezano z dodatnimi stroški, ki jih je mogoče posebej pridobiti pri nas glede na lokacijo dostave oziroma obseg dobave.