3D-Systems 3D Tiskalnik Fdm nakup rabljenega (35.138)

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Serie number D00794, obratovalne ure: 9.230 h, Z naprintalnikom so vključeni naslednji materiali: • 14 gradbenih plošč (7 neuporabljenih) • 0,5 koluta podpornega materiala (434,6 cm³) • 0,25 koluta ABS-CF10 (219,9 cm³) • 3 polni koluti ABS-CF10 (en odprt, vendar neuporabljen) • 2 polna koluta črnega PC/ABS • 5 polnih kolutov podpornega materiala • 1 rabljena modelna tiskalna glava (PC/ABS) (1.296 ur) • 1 rabljena podporna tiskalna glava (2.835,5 ur) Gedpfx Aney N Dhqjfsit • 1 rabljena TPU tiskalna glava (549 ur) • 1 rabljena ABS/CF10 tiskalna glava (330,5 ur) • 2 novi modelni tiskalni glavi (za podporni ali modelni material, brez polnila, brez TPU)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Markforged Type: X7 Gen 2 3D Printer The X7 prints industrial-grade manufacturing fixtures, jaws, tools, jigs, and end-use parts. It is designed for production use and prints parts stronger than machined aluminum, at a fraction of the cost. It combines excellent surface quality, build volume, and reliability. Accelerate production with Turbo Print and verify dimensional accuracy with Giodpovvlduofx Anfet Blacksmith adaptive manufacturing technology, exclusive to the X7. Technical data: Printer features Process: Fused Filament Fabrication, continuous fiber reinforcement Build volume: 330 x 270 x 200 mm (13 x 10.6 x 7.9 in) Weight: 48 kg (106 lbs) Footprint: 584 x 483 x 914 mm (23 x 19 x 36 in) Print bed: Kinematic coupling – flatness up to 80 μm precise Laser: In-process inspection, active print calibration, bed leveling Extrusion system: 2nd generation extruder, out-of-plastic and out-of-fiber detection Power supply: 100–240 VAC, 150 W (2A peak) RF module: 2.4 GHz Wi-Fi frequency range, 802.11 b/g/n standards Materials Available plastics: Onyx, Onyx FR, Onyx ESD, Nylon White, P-PLA, S-TPU 95A Available fibers: Carbon fiber, Carbon fiber FR, fiberglass, aramid fiber (Kevlar®), HSHT fiberglass Tensile strength: 800 MPa (25.8x ABS, 2.6x 6061-T6 Aluminum) * Tensile modulus: 60 GPa (26.9x ABS, 0.87x 6061-T6 Aluminum) * Part characteristics Layer height: 100 μm standard, 50 μm minimum, 250 μm maximum Infill: closed-cell infill; multiple geometries available Software Eiger Cloud: Slicing, part and build job management (additional options available for extra charge) Security: 2-factor authentication, org admin access, single sign-on Blacksmith: Adaptive manufacturing platform (additional purchase required) Year of manufacture: 2020 Last maintenance in December 2024 Sold from current location Condition: used Scope of delivery: (see pictures) One spool each of Kevlar, fiberglass, and carbon fiber, 11 partially used Onyx filament spools (Subject to change and error in technical data, all details are without obligation!) If you have further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Here we offer you a 3D-SYSTEMS 3D printer. The ZPrinter ProJet 660 Pro 3D printer features a large build volume, allowing for the production of large models without prior sectioning. Additionally, the large base area increases productivity when printing many small models in a single print run. This is a 3D color printer with impressive productivity and color accuracy. The ProJet ColorJet color 3D printers from “3D Systems”—also known as ZPrinter—use ColorJet CJP ‘binder jetting’ technology, printing layer-by-layer directly in a powder bed. As a result, even for complex and detailed prints, these 3D printers do not require dedicated support structures. The unfused powder supports the components during printing and is then semi-automatically recycled. Areas of application include: communication of form and design, installation analysis, initial functional testing, variant trials, form development, design, research & development, marketing, sales, master patterns for thermoforming, dental models, presentations, and more... This is the best ColorJet 3D color printer in its class for applications with the highest demands, setting new standards in full-color 3D printing systems. Technical data: ZPrinter ProJet 660 Pro 3D Printer Build envelope: 254 x 381 x 203 mm Colors: 390,000 colors (5 print heads including black) Resolution: 600 x 540 dpi Minimum feature size: 0.1 mm Automation: Fully automated (including automated setup and self-monitoring, automated powder loading, automated recycling and removal of powder, snap-in binder cartridges, intuitive control panel) Vertical build speed: 28 mm/hour Material options: High-performance composite material Layer thickness: 0.089–0.102 mm Number of jets: 1,520 Details: ZPrinter ProJet 660 Pro 3D Printer Supported file formats: STL, VRML, PLY, 3DS, ZPR Machine dimensions: 188 x 74 x 145 cm Machine weight: 340 kg Power requirements: 100–240 V, 1.5–7.5 A Workstation compatibility: Windows® 7, Windows® XP Professional, and Windows Vista® Business/Ultimate Regulatory compliance: CE, CSA Special setup requirements: None Gsdpfx Anehb Dtpsfjit Type: ProJet 660 Pro 3D Printer Condition: used Scope of delivery: (see picture) (Subject to alterations and errors in technical data. All specifications are subject to change.) For further questions, we are happy to assist you by phone.

Stanje: rabljeno, Leto izdelave: 1909, 3D Systems ProCure 750 Used for curing 3D-printed parts during the development phase at an automotive manufacturer. Gedpfov Upuuex Anfsit All lamps are functioning, and the turntable rotates smoothly.

Stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, Leto izdelave: 2013, SLA IPro 8000 3D tiskalnik Leto izdelave: 2013 Potrebuje celoten servis, pred kratkim vklopljen za izpraznitev rezervoarja za smolo. Stroj se prodaja EXW, prodaja se v videnem stanju. Eden lastnik od novega. Priporočena cena £250.000. Na voljo imam še en stroj Ipro 8000, letnik 2017. Godeyu Uxiepfx Anfsit Oba stroja se lahko prodajata skupaj v paketu ali za rezervne dele. Ogled strojev možen v Tadley Reading.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3009F484403, Leto izdelave: 2022, obratovalne ure: 217 h, Ponujamo ta 3D tiskalnik 3D Systems ProJet2500, letnik 05/2022, za prodajo. Gedpfxjyfv Dbs Anfeit Tiskalnik ima le 217 ur tiskanja (8 kg materiala), skoraj kot nov. Za vprašanja ali dodatne informacije nam lahko pošljete sporočilo ali nas pokličete.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2014, Tiskalnik je bil redko uporabljen in se nahaja na univerzi. Se ne uporablja več. Gijdpow Inpnofx Anfjt

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 240 V, vhodni tok: 12 A, vhodna frekvenca: 60 Hz, Ponujamo zelo dobro vzdrževan 3D tiskalnik 3D Systems Projet MJP 2500 Plus, letnik 2022. Giodpfsyb R E Sex Anfjt

Stanje: dober (rabljeno), 3D Systems Model: ProX™ 800 ProX™ 800 3D Production Printer by 3D Systems – High-Performance SLA Printer The unit has been regularly serviced Operating hours: 18,700 (as of 18/04/2023) Not operated after 18/04/2023 Note: Annual maintenance performed until disassembly For sale is a used ProX 800 stereolithography (SLA) production printer from 3D Systems. This large-format SLA system features state-of-the-art printhead technology, ideal for highly precise components and industrial applications (e.g., automotive, aerospace, medical technology). Additional features: - Automatic material refill system and prefabricated material feed module (quick module change, uninterrupted operation) - 3D-Manage™ software for CAD model and print job management - Device-integrated touchscreen control (Print3D Pro™) - Status/signal light module, centralized user interface - Comprehensive safety system including laser safety monitoring (Class I), emergency stop buttons and interlocks - Detailed maintenance and error diagnostics functions - Material container (MDM) Giedpfoxam Ifex Anfst Technical specifications: Printing technology: Stereolithography (SLA) with frequency-tripled Nd:YVO4 UV solid-state laser (355 nm, max. 3 W) Maximum build envelope: approx. 650 × 750 × 550 mm Dimensions (L × W × H): approx. 1370 × 1600 × 2260 mm Weight: approx. 907 kg Resolution: up to 0.00127 mm (laser spot size), 4000 DPI Accuracy: ± 0.025–0.05 mm per inch Materials: wide range of Accura resins (robust, transparent, high-temperature resistant, biocompatible, etc.) Electrical connection: Power supply: 200–240 V AC Frequency: 50/60 Hz Phase: Single phase connection Circuit breaker: 30 A Weight: approx. 1200 kg incl. material module Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data, information without obligation!) If you have further questions, we are happy to answer them by phone.

Stanje: zelo dobro (rabljeno), 3D Systems We are offering you a 3D printer here. Solid-State Nd:YVO4 with third harmonic generation Wavelength: 354.7nm Nominal laser head output: 1450 mW (1000 mW at the resin surface under standard conditions) Zaphyr™ Coating System: Process: Interchangeable coater Adjustment: Self-leveling and self-correcting Production layer thickness: Minimum 0.05mm, Maximum 0.15mm ProScan™ Scanner Edge detection (diameter at 1/e2): Nominal in standard mode 0.13mm Wide line detection, nominal: 0.76mm Maximum drawing speed Edge detection: 3.5m/sec Wide line detection: 25m/sec Build volume capacity: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Environmental conditions Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirements: Dimensions (W x D x H), unpacked: 1260mm x 2200mm x 2280mm Weight packed (without RDM): 1590kg Model: iPro 8000 Condition: used Scope of delivery: (Please see pictures) Gijdpfsnkalgox Anfst (Changes and errors in the technical data, specifications reserved!) If you have further questions, we are happy to assist you by phone.

Leto izdelave: 2010, stanje: potreben popravila (rabljeno), Funkcionalnost: omejena funkcionalnost, model krmilnika: MTT AutoFab, notranja višina: 250 mm, laserska moč: 400 W, številka stroja/vozila: SLM2501004, vrsta laserja: vlakenski laser, Oprema: odsesavanje prahu, No reserve price – guaranteed sale to the highest bidder! Note: The machine is in visually clean condition. It is also technically complete, and the laser has been replaced by the manufacturer. However, the printer has limited functionality regarding focus quality at the margins, which is likely due to the optics and therefore requires adjustment or repair. TECHNICAL DETAILS Process: Selective Laser Melting (metal 3D printing) Laser: IPG fiber laser (replaced by manufacturer) Laser power: 200 W Total power: 400 W Maximum power: 900 W Output power adjustment: 10 - 105% Long-term output stability: ± 3% Beam quality: < 1.1 M² Wavelength: 1,075 ± 5 nm Spectral linewidth FWHM: < 3 nm Maximum modulation frequency: 50 kHz Build chamber height: 250 mm Shielding gas operation: Argon/inert gas Cooling: water-cooled Cooling temperature: < 30 °C MACHINE DETAILS Laser type: YLR-200-WC Gisdpfxey H Hxys Anfjt Electrical voltage: 85 / 240 V AC Amperage: 15 A Laser hours: 0.1 h Pump operating hours: 2,644 h Power-on hours: 5,017 h Heating power: 1,000 W Nominal temperature: 18–30 °C Air pressure: 6 bar Ambient temperature: 0–45 °C Dimensions & Weight Dimensions (W x D x H): 3 U 19" rack Machine weight: 60 kg EQUIPMENT Powder system PSH 100 Extraction and filter system Chiller unit 5x powder bottles (5 L) 6x substrate plates 10x filter cartridges (H13) 26x slider lips Spare sieves Protective suits Optics cleaning cloths (F-theta) Various small parts & spare components

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, obratovalne ure: 560 h, Vključeni potrošni materiali v vrednosti 5000 €! HP-jevi potrošni materiali, vsi zapečateni in v originalni embalaži: 5x 500ml fuzijski/detaljni agent ~5x270€ = 1350€ 12x barvnih sredstev (vse barve) ~12x130€ = 1560€ 1x komplet barvnih tiskalnih glav ~ 950€ 1x komplet tiskalnih glav ~ 950€ 1x PA12 prah Prodajamo naš malo rabljen tiskalnik HP MJF-580. Naprava je bila uporabljena izključno z veljavno pogodbo s HP. Trenutno pogodba ni aktivna. Naprava lahko tiska dele v vseh barvah. Prevzem organizira kupec. Gijdpfx Anoxm Uypsfot

Leto izdelave: 2022, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.870 kg, obratovalni tlak: 8 letvica, notranja višina: 365 mm, notranja dolžina: 280 mm, laserska moč: 700 W, številka stroja/vozila: 28.22.0079, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser Power: up to 2 x 700 W Temperature Range: 20–25 °C Relative Humidity: max. 60 % Floor Irregularity: max. 5 mm/m² Floor Load Capacity: min. 2,200 kN/m² Floor Surface: antistatic, solvent-resistant, liquid-tight, smooth Processing Area and Process Data Build Envelope (L x W x H): 280 x 280 x 365 mm Actual Build Rate: up to 113 cm³/h Variable Layer Thickness: 20–90 µm Minimum Feature Size: 150 µm Laser Spot Diameter: 80–115 µm Scan Speed: max. 10 m/s Gsdpfxjy Rn A Ie Anfjit Laser Type: IPG fiber laser Media Supply Operating Pressure Argon: 7–8 bar Operating Pressure Nitrogen: 7–8 bar Operating Pressure Compressed Air: 7–8 bar Operating Pressure Cooling Water: 4 bar Compressed Air Quality: ISO 8573-1:2010 [1:4:1] Primary Circuit Flow Rate: 1.4 m³/h Cooling Water Supply Temperature min.: 18 °C Cooling Water Supply Temperature max.: 20 °C Cooling Medium: Coolflux MACHINE DETAILS Electrical Connection Data Connection: CEE 3/N/PE Voltage: 400 ±10 % V Frequency: 50/60 Hz Maximum Current Draw: 40 A Connected Load: 3.5–5.5 kW Heating Power: 1,200 W Cooling Capacity: 4.6 / 5.8 kW Largest Motor: 7.5 kW Dimensions & Weight Dimensions (L x W x H): 2,600 x 1,200 x 2,700 mm Transport Weight: 1,870 kg EQUIPMENT Powder Sieving Machine PSM 100 Pallet Truck Accessories Chiller Unit Starter and Installation Package AMC Industrial Vacuum UPS Post-Processing Table Microblasting System 620S Microblasting System 850SK Bidirectional Powder Coating Open Powder Architecture Open Parameter Architecture Integrated SLM Build Processor Manual Powder Sieving Glove Boxes Integrated in Doors Layer Control System Melt Pool Monitoring Laser Power Monitoring Monitoring of Chamber Temperature, Oxygen, and Gas Flow

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, skupna dolžina: 584 mm, skupna višina: 483 mm, skupna širina: 914 mm, skupna masa: 48 kg, We are offering our two 3D printers, both fully operational and in good condition. These units are only being sold together. Markforged Onyx Pro – Professional Composite 3D Printer: Total weight: 48 kg Dimensions: 584 x 330 x 355 mm Printing process: Fused Filament Fabrication (FFF) + Continuous Fiber Reinforcement (CFR) Build volume: 320 x 132 x 154 mm Print bed: kinematic coupling up to 160 µm Extruder: 2 nozzles (0.4 mm plastic; 0.9 mm fiber) Fibers: Continuous glass fiber for reinforced components Laser-assisted calibration: automatic leveling Layer height: 100 µm (standard); up to 250 µm Materials: Onyx (nylon/carbon), Precise PLA, Smooth TPU Tensile strength: approx. 590 MPa (significantly higher than ABS) Software: Markforged Eiger (cloud-based) Connectivity: Wi-Fi (802.11 b/g/n) Operating hours: 6,236 h Markforged X5 – Industrial Composite 3D Printer: Weight: 48 kg Dimensions: 584 x 483 x 914 mm Printing process: Fused Filament Fabrication (FFF) + Continuous Fiber Fabrication Build volume: 330 x 270 x 200 mm Print bed: kinematic coupling flatness up to 80 µm Extruder: 2 nozzles (0.4 mm plastic; 0.9 mm fiber) Fibers: Continuous glass fibers for reinforced components Laser-assisted calibration: automatic leveling Layer height: 100 µm standard; minimum 50 µm; maximum 250 µm Materials: Onyx, Onyx FR, Onyx ESD; glass fiber, Precise PLA, Smooth TPU Software: Markforged Eiger (cloud-based) Connectivity: Wi-Fi (802.1 b/g/n) Operating hours: 11,822 h Both units are used, but fully operational. Fields of application: Functional parts, prototypes, end-use parts, tools, jigs and fixtures for automotive, aerospace, medical technology, mechanical engineering, and defense. Scope of delivery: Standard Eiger software, power supplies, basic materials, tool kits. Optional add-ons available on request. Location upon request! Gedoy Rq Hijpfx Anfeit Collection or transport can be arranged.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, skupna dolžina: 950 mm, skupna višina: 1.360 mm, skupna širina: 700 mm, skupna masa: 188 kg, dolžina podajanja os X: 297 mm, dolžina pomika po osi Y: 210 mm, dolžina podajanja os Z: 200 mm, We are offering this ready-to-use Keyence AGILISTA-3200W. All maintenance has been carried out by Keyence. A complete service was recently performed by Keyence, and since then the printer has been on standby. The printer is in excellent condition. Complete accessory kit included for immediate start: - 1x Cartridge of print material - 1x Cartridge of support material - 3x Waste containers - 1x Settling tank for printed parts - Cleaning set for parts and printer Viewing by appointment possible. On-site instruction/training available. Gsdpsy Hmhhofx Anfjit Technical specifications: - Print material: AR-M2 (transparent print material), AR-H1 (heat-resistant print material), AR-G1L (silicone rubber [low hardness]), AR-G1H (silicone rubber [high hardness]) - Support material: AR-S1 (water-soluble support material) - Build volume: 297 × 210 × 200 mm (DIN A4 size × 200 mm) - Resolution: 635 × 400 dpi - Layer thickness: High resolution AR-M2: 15 µm, standard resolution AR-M2: 20 µm, AR-H1: 20 µm, AR-G1L/H: 30 µm - Interface: Ethernet 10BASE-T / 100BASE-TX - Operation: Color touch panel - Dimensions: 95 x 70 x 136 cm - Weight: 188 kg If you have any questions or need more information, please feel free to send us a message or call us.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 20 h, The system consists of: Form 4L SLA printing system with automatic washing unit (v1.0) and automatic curing unit (v1.0). The system includes 4 tanks with mixers. Of those, 2 pieces are unused and in their original packaging. 1 tank with mixer is designated for ESD V1.0 (used), and one for White V1.0 (currently in use). In addition to the 3D printer with build platform, the cure unit, and the wash unit, the offer also includes an additional manual washing unit for post-cleaning and rinsing of automatically washed parts, e.g., with water or IPA. Workbench and cordless screwdriver are not included in the offer. However, the workbench with the cabinet for a foldable vise (not shown in the images) is also for sale and has a stainless steel sheet covering. Alongside an ample range of original accessories, there are also several unopened units of resin available for sale at a reduced price. Workbench dimensions: 250x70x90 cm Only three parts have been printed on the system so far, so it is in nearly as-new, perfect condition. Some protective films are still partially in place. The system can be demonstrated under power, and must be picked up by the buyer in an unpackaged condition upon purchase. Giedpfx Asy Rhp Uenfet

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 33234, Leto izdelave: 2013, Stratasys Objet 260 Connex – profesionalni 3D-tiskalnik Naprodaj je Stratasys Objet 260 Connex 3D-tiskalnik, letnik 2013. Naprava izvira iz profesionalnega okolja in je primerna za prototipiranje in razvoj izdelkov. Dodatna oprema po dogovoru. Več informacij na zahtevo. Gjdsyag Imspfx Anfeit

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.772 mm, skupna višina: 1.683 mm, skupna širina: 2.027 mm, skupna masa: 2.869 kg, iAM Marketplace – oficiálny partner pre použité stroje značky Stratasys! Ihneď k dispozícii je niekoľko profesionálne repasovaných 3D tlačiarní Stratasys F900. Každý stroj je podrobený dôkladnej kontrole podľa prísnych smerníc, všetky tlačové komponenty sú skontrolované, repasované a validované viacerými testovacími tlačami. Výsledkom je spoľahlivý výkon, vysoká kvalita tlače a ekonomicky atraktívna alternatíva k novému stroju. Gijdpfsytckqox Anfot Stroje sa líšia rokom výroby, výbavou a počtom prevádzkových hodín. Podrobnosti o stave stroja a cenovom rozpätí vám radi poskytneme na požiadanie. Stratasys F900 je priemyselná veľkoformátová 3D tlačiareň FDM s pracovným objemom 914,4 x 609,6 x 914,4 mm. Tento stroj je vhodný na funkčné prototypy, koncové diely i výrobné prípravky. Ponúka vysokú presnosť, opakovateľné výsledky tlače a spoľahlivý výrobný výkon. Možné spracovať viac ako 25 rôznych materiálov.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: PKG-F4-WSVC-BASIC, Leto izdelave: 2024, skupna dolžina: 500 mm, skupna višina: 400 mm, skupna širina: 500 mm, vrsta vhodnega toka: Klimatska naprava, skupna masa: 20 kg, vhodna napetost: 230 V, Formlabs Form 4 SLS/Resin 3D imprimante – NEUF & dans son emballage d'origine (année 2024) avec accessoires complets À vendre : notre imprimante 3D Formlabs Form 4 neuve, acquise en décembre 2024. L'appareil est encore dans son emballage d'origine et n'a jamais été utilisé. L'imprimante convient parfaitement pour des prototypes de haute précision, des composants fonctionnels et des applications industrielles et offre la qualité et la fiabilité reconnues de Formlabs. 🔧 Contenu de la livraison (complet & neuf) Form 4 Resin Tank Form 4 Mixer Form 4 Build Platform Form 4 Finish Kit Résine Rigid 10K (Form 4) – 2 litres 📌 État Neuf, inutilisé Emballage d'origine présent Disponible immédiatement Gsdpfx Ansy H Eyvefeit 💡 Points forts Impression 3D industrielle haute résolution Excellente qualité de surface Idéal pour les applications d’ingénierie (par ex. avec Résine Rigid 10K) Système plug-and-play 🚚 Divers Visite possible sur rendez-vous Expédition ou enlèvement possible

Stanje: rabljeno, Leto izdelave: 2018, 3D printer Laser type / power: Yb fiber laser / 250 W Wavelength: 1070 nm Lens: F-theta precision lens Build volume: Ø 100 mm x 100 mm Reservoir volume: Ø 200 mm x 200 mm Coater: Rotation-guided coater Gas connection: Argon / Nitrogen Layer thickness: 20 – 100 μm Scan speed: Jog 20 m/s, Operation 6 m/s Spot size: min. 40 μm Chamber opening: 450 x 180 mm Gijdpfx Aevtftqjnfst

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 240 V, vhodni tok: 13 A, vhodna frekvenca: 60 Hz, Ponujamo to rabljeno 3D tiskalnik Stratasys Objet350 Connex3, letnik 2019. Gjdpfxsyzq Nlo Anfsit Model: Objet350 Connex3 Serijska številka: 370192 Leto izdelave: 2019 Napajalna napetost: 100–120 V Napajalna napetost: 200–240 V Nazivni tok: 13,5 A Nazivni tok: 7 A Frekvenca: 50–60 Hz Število faz: 1 Kratkotrajna tokovna obremenitev: 1000 A Če imate kakršnakoli vprašanja ali potrebujete dodatne informacije, nam pišite ali nas kontaktirajte po telefonu.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Popolnoma delujoč tiskalnik. Licenca za modelne materiale za vrste materialov: ABS, PC, Ultem 9080. Giedsyzzmbepfx Anfst

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, obratovalne ure: 957 h, vrsta vhodnega toka: trifazni, skupna masa: 600 kg, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, laserska moč: 30 W, dolžina podajanja os X: 200 mm, dolžina pomika po osi Y: 250 mm, dolžina podajanja os Z: 330 mm, največja hitrost vožnje: 20 mm/min, EOS Formiga P110 Velocis Complete System – incl. peripherals & accessories For sale is a high-performance and proven EOS Formiga P110 Velocis system for industrial 3D printing using the SLS process (Selective Laser Sintering). _____ Machine details: • Model: EOS Formiga P110 Velocis • Year of manufacture: 2019 • Operating hours: only 957 h • Process: Selective Laser Sintering (SLS) • Condition: very good, fully functional • Accessories and peripherals: all original EOS components _____ Technical specifications: • Build volume: 200 x 250 x 330 mm (X x Y x Z) • Laser: CO₂ laser, 30 W • Layer thickness: 0.06 – 0.12 mm • Build speed: up to 20 mm/h (z-axis, material-dependent) • Materials: PA12, PA11, TPU, and other SLS-suitable polymers • Power supply: 400 V, 3~ / 50 Hz • Compressed air: required • Software: EOSPRINT / Material Management System • Machine weight: approx. 600 kg _____ Scope of supply (complete system): • EOS Formiga P110 Velocis • Unpacking station and sieving station P1/P3 • Mixing station P1 for recycled powder (material preparation for economical operation) • Sandblasting cabin by Leering, type DI-12 (for professional post-processing) • Ruwac vacuum unit, type WS 200H Zone 22 explosion-proof (for safe handling of plastic powder) • 4x material containers • 2x build containers _____ Key highlights: • Very low operating hours (only 957 h) → virtually as new • Complete, ready-to-use SLS system • High productivity thanks to Velocis technology • Closed material loop → reduced material costs • Industrial standard – ideal for professional applications • All accessories original EOS → perfect system integration _____ Fields of application: • Prototyping Gisdpfx Anjy El Anefet • Small series production • Spare parts & customized components If you have any questions or need more information, please send us a message or give us a call. A viewing appointment can also be arranged after prior agreement.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: -, Leto izdelave: 2021, obratovalne ure: 3.394 h, Stroj je popolnoma delujoč in v zelo dobrem stanju. Priloženi so vsi dodatki – ključ za menjavo šobe, podložke za izravnavo mize, mast za menjavo šobe. V paketu so tudi nekateri rezervni deli: 2 šobi in set za zamenjavo cevi. Suha škatla (Drybox). Gisdjyyak Ajpfx Anfst

Leto izdelave: 2022, obratovalne ure: 8.755 h, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MPR00044, Ponujamo rabljeni kovinski 3D-tiskalnik One Click Metal MPRINT+ One Click Metal OCM, letnik 2022. Trenutna nova cena je 175.000 €, z dvema gradbenima kasetama (ena ogrevana do 250 °C), še vedno v uporabi – prodajamo, ker smo kupili model z večjim gradbenim volumnom. Cena: 85.000 €. model: MPRINT+ in MPURE Gsdpfx Ajy N Dzwenfoit serijska številka: MPR00044 leto izdelave: 10/2022 priključna napetost: 230 VAC 50/60 Hz varovalka: 16 A teža: 440 kg Za dodatne informacije ali vprašanja nam pošljite sporočilo.