3D Systems SLS PRO 230

3D Systems SLS PRO PRO 230 Sinterstation Pro

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna masa: 24 kg, skupna višina: 1.000 mm, skupna širina: 330 mm, skupna dolžina: 530 mm, La MultiTest 2.5dV est l'une des machines d'essai de traction et de compression les plus largement fournies. Le testeur est robuste, précis, et peut être entièrement configuré selon vos besoins avec des cellules de mesure, des mors et des logiciels. La MultiTest 2.5dV peut être équipée de cellules de mesure allant de 2 N à 2,5 kN, en fonction de vos exigences. Le logiciel VectorPro Lite est très intuitif et offre une interface claire. Ainsi, le testeur n'est pas seulement utilisé en laboratoire ou en salle de métrologie, mais également en plein cœur de l'environnement de production. Lors de l’utilisation du logiciel, toutes les données sont sauvegardées et peuvent être rappelées ultérieurement. Sans logiciel, le testeur fonctionne en mode autonome et peut transmettre les valeurs mesurées vers un ordinateur de différentes manières. Ljdpfx Aasx Apntemorp Le prix comprend une cellule de mesure au choix et des câbles, ainsi que la livraison aux Pays-Bas et en Belgique, la mise en service et la formation. Nous offrons une garantie de 2 ans. Le supplément pour le logiciel VectorPro Lite est de 1 000 €, les mors ne sont pas inclus dans le prix.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Teknologia: Selektiivinen laser-sintraus (SLS) Rakennustilavuus: 230 x 230 x 250 mm (9,0 x 9,0 x 9,8 tuumaa) Lredswcyzajpfx Aamjp Laserin teho: 60W kuitulaser (CO2) Kerrosvahvuus: 0,06 / 0,08 / 0,1 / 0,15 / 0,2 / 0,3 mm Suurin rakennusnopeus: Jopa 22 mm/h (riippuen geometriasta) Tarkkuus: 0,2 mm Täysi parametriohjaus: Kyllä Tulostimen mitat: 148 x 85 x 204 cm (58,3 x 33,5 x 80,3 tuumaa)

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), Na voljo je razpakirna in sejalna postaja Schkinke Anlagenbau za 3D tiskalnik EOS P3. Dimenzije stroja X/Y/Z: pribl. 1200mm/650mm/1500mm, teža: pribl. 300kg. Vključen gradbeni okvir. Ogled na lokaciji je možen. Ledpexltuvofx Aamsrp

Stanje: skoraj kot novo (rabljeno), Type: Farsoon FS HT1001P Build Station, Preheating Station, Cooling Station Automated job changeover between two build cylinders Scanner from a Chinese manufacturer, deviates from standard series specification Modifications and condition: - Overflow system upgraded with automatic draining - Laser protection glass replaced, approx. 200 operating hours - Infrared emitters replaced, approx. 500 operating hours Lodey Hg S Topfx Aamjrp - Ports for IR cameras present, cameras not included - Curtains installed in the build chamber - Operating hours printer: less than 2000 hours Dimensions: 5585 × 3410 × 2980 mm Weight: approx. 5000 kg Maximum build size: 1000 × 500 × 450 mm Build volume: up to 15 liters per hour Scanner: 2 × high-precision 3-axis galvo systems Scan speed: up to 15.2 m/s Layer thickness: 0.06 to 0.3 mm Laser: 2 × CO₂ lasers, 100 W each Max. chamber temperature: 220 °C Thermal control: multi-zone heating with intelligent temperature management Temperature regulation: continuous real-time monitoring and optimization Operating system: 64-bit Windows 7 File format: STL Software features: manual and automatic control, real-time parameter adjustment, 3D visualization and diagnostics Recommended materials: FS3300PA, FS3250MF, FS3400GF, FS-TPU Voltage: AC 380 V, 3-phase, N/PE Frequency: 50 to 60 Hz Total power: 25 kW Maximum current: 45 A Voltage fluctuation: ± 10 % Fuses: 3 × 50 A Preheating Station - No active preheating present - Used for storage of build cylinders for automated changeover - Roller blinds for protection against crushing and burn hazards Cooling Station - Nitrogen flooding under seal - Surface temperature measurement of the powder cake - Roller blinds as safety feature - Cooling system: Deltatherm - Compressor power: 1.32 kW - Pump power: 0.45 kW - Flow rate: approx. 18 liters per minute - Pump pressure: approx. 5.0 bar - Cooling medium: drinking water - Connections: supply and return 3/4" female thread - Tank volume: approx. 30 liters - Air volume: approx. 2250 cubic meters per hour - One axial fan present - Fan power: 135 W - Dimensions: W 740 mm × D 740 mm × H 500 mm - Weight: approx. 110 kg Unpacking Station (Powder Breakout Station) Dimensions: 1870 mm × 920 mm × 2150 mm Weight: approx. 1200 kg 200-240 Volts Frequency: 50 to 60 Hz Total power: 2 kW Max. current: 10 A Powder Handling Schleiss RPTech - Function: Mixing, sieving, and conveying plastic powders - System forms a complete powder circuit - Components: powder mixing unit with mixer and sieving machine, containers for blended powder, overflow powder, used powder, and fresh powder; pumps for material transfer between containers; humidification module present - Vibratory motor for sieve not included Powder Handling Mixing and Sieving System Technical Data: - Dimensions: 1800 x 815 x up to 2600 mm height - Weight: approx. 240 kg - Temperature range: 0 to 40 °C - Mixing throughput: approx. 10 liters in 8 min - Sieving throughput: 5 kg in 3 min - Voltage: 230 V at 50 Hz with 16 A circuit breaker - Mixer power: 210 W - Extraction power: 2200 W - Air demand: approx. 100 to 140 liters per minute - Operating pressure: 5 to 6 bar Condition: used Scope of delivery: (see picture) (Technical data may be subject to change and errors reserved!) For further questions, please feel free to contact us by phone.

Stanje: pripravljen za uporabo (rabljen), Na voljo je plastična laserska sintrirna enota. Dimenzije stroja X/Y/Z: cca 1200mm/650mm/1500mm, teža: cca 300kg. Ogled na lokaciji je možen. Lsdpfx Aaoxltu Aomjrp