Mit Rollkran Kennis 16.000& Steinzange nakup rabljenega (8.918)

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 06/2006, Leto izdelave: 2006, Polpriklopnik s žerjavom Kennis Tip 16.000 2 krmiljeni osi Nsdpfoyuynisx Ah Uoct Klešče za kamen Takoj na voljo Nemško vozilo Kennis 16.000 (Hyva) Dvižni moment: 1600 kNm pri max. dosegu: 9,55 m, max. nosilnost: 1,4 t Podpora: vh Območje vrtenja: 400° Motor: 2-valjni

Stanje: rabljeno, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2024, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 1.435 mm, skupna širina: 2.475 mm, Leto izdelave: 2024, Oprema: ABS, PACTON three-axle steered crane semi-trailer type TPL.342.C-B Dimensions and weights: Chassis length: 13,300 + 200 mm Loading platform width: 2,475 mm Total width: 2,550 mm Front overhang: 1,200 mm Wheelbase (axle 2): 8,000 mm Rear overhang (axle 2): 3,800 mm Kingpin-to-landing gear distance: 2,500 mm Front turning radius: 2,040 mm Axle spacing: 2,020 mm Neck height: 270 mm Ncjdpfx Aoy Hacljh Uot Fifth wheel height: 1,165 mm Loading height: 1,435 mm Kingpin load: 15,000 kg Total axle load: 27,000 kg Gross vehicle weight: 42,000 kg Axles and air suspension: SAF air suspension with three rigid, low-maintenance axles with disc brakes, technical axle load per axle: 9,000 kg, with ride height valve on the 3rd axle. Lift/lower valve equipped. The rear two axles are force-steered via a Tridec single-rod (linear) steering system. The 1st axle is a manually operated lift axle. Tyres: Single wheels with 6 steel rims, size 22.5 x 11.75 (hub-centric), equipped with premium "A brand" tyres as chosen by Pacton (Goodyear, Bridgestone, or Continental) in size 385/65 R22.5. Floor: Full TUV-certified floor, including center section, 4 mm steel plate 4 mm steel floor plate between the longitudinal beams. Front wall: Detachable aluminum front wall, 1,200 mm high, 6 mm thick. Lighting and air connection console positioned approx. 350 mm high on the outside. Access ladder on the left side with four steps. Side walls: 2 x 5 foldable (3 hinges per side wall) and removable aluminum side boards, 1,000 mm high Kinnegrip stakes in aluminum design (K20) Aluminum partition board including 4 x 2 stake pockets and 2 x insertable stakes Kennis loader crane R16/71-3 incl. Premium stone grab Sample images, crane images will follow shortly. Available immediately.

Stanje: rabljeno, prva registracija: 01/2013, Leto izdelave: 2013, Kennis 16-R/7.10 nakladalna dvigalka ? Leto izdelave 2013 ? Pripravljeno za radijsko upravljanje----Tehnični podatki Proizvajalec: Kennis * Tip: 16-R/7.10 * Leto izdelave: 2013 * Maks. hidravlični tlak: 285 bar * Doseg / nosilnost po diagramu: * 3,50 m – 4.500 kg * 4,70 m – 3.350 kg * 5,90 m – 2.550 kg * 7,10 m – 2.100 kg Nsdpeyn Tvmofx Ah Usct * Kot vrtenja: ca. 400° * Širina stabilizatorjev: 5.400 mm ----Stanje rabljeno, delujoče * Vidni sledovi rje in uporabe * Hidravlika prisotna * Za podrobnosti glejte slike ----Dobava kot je prikazano * Brez garancije ali odgovornosti Za dodatne informacije smo vam na voljo.

Stanje: rabljeno, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2007, naslednji pregled (TÜV): 07/2022, Oprema: ABS, M & V roll crane semi-trailer Side walls 3rd axle steerable Kennis crane type: R - 16 / 7.10 Nsdjxplq Ropfx Ah Ujct At 7.10 m - 2100 kg lifting capacity Pallet fork Further information available upon request.

Stanje: rabljeno, največja dovoljena obremenitev: 31.050 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2009, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.000 mm, Leto izdelave: 2009, Schwarzmüller flatbed trailer plus Kennis Type 16.000 roll-off crane with hydraulic outriggers ---- * Manufacturer: Schwarzmüller * Model: Flatbed trailer plus Kennis Type 16.000 roll-off crane with hydraulic outriggers * First registration: 02/2009 * Gross vehicle weight: 39,000 kg * Unladen weight (according to registration document): 7,950 kg * Payload: 31,050 kg * Axles: 3 x Mercedes, with 1st axle as lift axle / 3rd axle forced steering * Suspension: Air suspension with lifting and lowering function * Tyres: 385/65 R 22.5 approx. 50% * Platform internal dimensions: approx. 13.50 m long x 2.48 m wide x 1.00 m high * Colour: Chassis black, sideboards yellow * EBS * Kennis roll-off crane Type R-16/7.10, year 2009, with hydraulic outriggers * 3 hydraulic extensions * Max. reach at 7.10 m = 2,100 kg * Short arm at 3.50 m = 4,500 kg Njdpfxegbtdvs Ah Uect * 5th and 6th control circuits * High seat with joystick control * Hatz diesel engine with Silent Pack * Container locks for 20 ft or 40 ft containers * 5-piece aluminium side walls * Rear wing door * Rear left access ladder * Removable stanchions * Lashing rail left and right for load securing * Wooden/steel floor * 2 toolboxes left * 1 toolbox right * Single mudguards * Full load supports * Reversing lights * Spare wheel holder * Pallet fork available at extra cost German trailer! German documents!

Stanje: rabljeno, največja dovoljena obremenitev: 31.050 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2009, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.000 mm, Leto izdelave: 2009, Schwarzmüller flatbed trailer with Kennis type 16.000 roll-off crane and hydraulic outriggers ---- * Manufacturer: Schwarzmüller * Model: Flatbed trailer plus Kennis type 16.000 roll-off crane with hydraulic outriggers * First registration: 02/2009 * Gross weight: 39,000 kg * Unladen weight according to registration: 7,950 kg * Payload: 31,050 kg * Axles: 3 x Mercedes, with 1st axle as lift axle / 3rd axle forced steering * Suspension: Air suspension with lift and lower function * Tyres: 385/65 R 22.5, approx. 50% tread remaining * Platform dimensions (internal): approx. 13.50m long x 2.48m wide x 1.00m high * Colour: Chassis black, drop sides yellow * EBS * Kennis roll-off crane type R-16/7.10, year 2009, with hydraulic outriggers * 3 hydraulic extensions * Max. outreach at 7.10 m = 2,100 kg * Short arm at 3.50 m = 4,500 kg * 5th and 6th control circuits * Elevated operator seat with joystick controls * Hatz diesel engine with Silent Pack * Container locks for 20 ft or 40 ft containers * 5-section aluminium drop sides * Rear wing door Nsdpogt Si Tjfx Ah Usct * Rear left access ladder * Removable stakes * Lashing rail left and right for load securing * Wooden/steel floor * 2 toolboxes left * 1 toolbox right * Single mudguards * Full-load support legs * Reversing lights * Spare wheel carrier * Forklift pallet fork available at extra cost

Stanje: dober (rabljeno), • Type: GS - 250 • Serial No.: 14 • Year of manufacture: 1999 • Dimensions min.: L1100 mm x W800 mm x H900 mm Ncsdergqp Njpfx Ah Ujt • max.: L1700 mm x W1300 mm x H900 mm • Power supply: 1 x 220V / 50Hz / 7.8 A • Connected load: 1500 W / 2800 RPM – 1 kW • Price on request

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 91130417, Leto izdelave: 2018, obratovalne ure: 320 h, nosilnost: 1.600 kg, dvižna višina: 5.000 mm, prosto dvigovanje: 1.550 mm, težišče tovora: 600 mm, tip droga: triplex, gradbena višina: 2.200 mm, model baterije: PzS, kapaciteta baterije: 465 Ah, napetost baterije: 48 V, dolžina vilic: 1.150 mm, Oprema: UVV varnostni pregled, Jungheinrich ETV 216 regalski viličar s triplex dvigalom 500DZ v zelo lepo ohranjenem stanju. Naprava z malo delovnih ur, integriranim stranskim pomikom, popolnim prostim dvigom in kompaktno konstrukcijsko višino. Tehnično in vizualno v dobrem splošnem stanju, takoj pripravljena za uporabo, vključno s polnilcem. Možen izvoz in transport. Nsdjy Tpukjpfx Ah Usct

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, *Video ist nur ein Beispiel, wie man diese Zelle vorbereiten kann Zelle mit Schleifroboter Kuka KR 180 Schleifzelle Berger 2012 (Außenschleifen A1) - Gesamtgewicht ca. 6300 kg - Abmessungen von der Zelle: ca. 4650 x 2400 x 3100 mm 6-Achsen Roboter Kuka KR 180 R2500 Extra - Baujahr 2011 - Steuerung KRC 4 - zusätzliche Achse (7. Achse) Bandschleifstation BSS10 - max. Riemenabmessungen 3500 x 30 mm - max. Kontaktscheibendurchmesser 200 mm - Motorleistung 4 kW 2 x Polierstationen, - Polierscheibendurchmesser 350 - 600 mm Njdpeg Saqvefx Ah Uect - Leistung 5,5 kW Greiferwechselschrank BandfördererInteroll Automation GmbH - Gesamtlänge ca. 2000 mm - Bandbreite ca. 440 mm Im Preis ist ein komplettes Konzept wie auf dem Video zu sehen ist Wir haben 4 solche Zellen. Es ist möglich, jedes Detail zu machen, wie Sie im Video sehen können

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stair Stringer Milling Device SCHEER TW 4 + Router HM 16 Everything is in visually and technically excellent, as-new condition, the machine has been used very little. Everything works perfectly. You can start working with it immediately. All machines are intended for professional/commercial use, not hardware store junk. Stair Stringer Milling Device SCHEER TW 4 With this device, you can mill steps and risers very precisely and accurately. The hand crank even allows you to process curved end faces; you can also use it for milling cutouts in other panel materials, for example, kitchen worktops. Equipped with hardened guide shafts, on which the cross slide with the router is mounted. With ball bearing guide bushings, allowing the device to be moved very easily, accurately, and safely. The machine can be securely clamped to the stringer or similar workpieces with 4 screw clamps. The cross slide features two stops each for both longitudinal and transverse directions. Comes with two positioning angles. Includes user manual, tools, and all accessories. The milling travel in the longitudinal direction is 750 mm; in the transverse direction, the milling travel has been increased from 75 mm to 320 mm, which has significantly expanded the possible uses of the machine. To increase the milling travel, a new base frame made of aluminum profiles had to be built. The modification work was carried out by a reputable mechanical engineering company. Everything works perfectly; this machine is truly unique. Router SCHEER HM 16 Very good condition, with only minor signs of use. Extremely robust due to the triple-supported milling spindle. Precise concentricity and flawless milling finish. Accurate column guide and torsion-resistant milling table. Constant speed even under heavy load. With high-performance motor (virtually no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Nodeyxr T Topfx Ah Ujct Bearings are in good condition. This machine is suitable for the heaviest continuous milling operations. Good visibility of the milling shaft; chips are blown away by a strong fan. 220V, 1800W Speed: 18,000 rpm Works flawlessly. With M16 IG tool holder.

Stanje: novo, Cantilever Racking New, H: 400 cm, Base + 3 Storage Levels with Roof & Rear Wall Delivery: Free delivery within Germany (except islands) Specifications: - Height: approx. 400 cm - Depth: approx. 147 cm - Length: approx. 1,420 cm - Cantilever Arms: approx. 125 cm - Axle spacing: 290 cm (can be customised on request) - New units – made in Germany - Delivery time: approx. 6 weeks after clarification of commercial details - Load capacity: 1,000 kg per arm - Load capacity: 4,000 kg per upright - Uprights hot-dip galvanised - Cantilever arms hot-dip galvanised - Arms bolted - Arms adjustable in 200 mm increments - Levels: base + 3 storage levels (4 storage levels total) Scope of delivery: - 06 x uprights, incl. base, approx. 400 cm, made from IPE270 - 18 x cantilever arms, approx. 125 cm, made from IPE120 - 06 x roof beams, approx. 150 cm, made from IPE120, with 5° roof pitch - Incl. roof and rear wall material - Incl. all required fastening elements and bolts Why choose BLT cantilever racking? - Certified German manufacturer, DIN EN 1090 – Made in Germany - All specified load capacities for uprights and arms are statically proven at 100% load - All racks supplied hot-dip galvanised. Can be used indoors or outdoors and do not corrode like painted systems. Uniform appearance for many years - We use only legally prescribed hot-dip galvanised bolt sets according to DIN EN 15048-1 - Long-term availability of spare parts - Upright base and rear are welded together for extra safety and faster installation—no need to bolt base to rear - Bracings made from angle steel, eliminating adjustment with turnbuckles and reducing assembly time - No elongated hole system—no weakening of upright profile Price: Nodpey Uh Sqjfx Ah Usct €12,250.00 net plus statutory VAT You will receive an invoice with VAT shown Assembly: Our trained personnel will gladly assist with professional assembly and dismantling of your workshop equipment if required Our recommendation: Let us know your requirements... We are happy to support you from planning and ordering to installation of your project

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, nosilnost na konzolno roko: 140 kg, višina police: 2.500 mm, skupna dolžina: 3.150 mm, skupna višina: 2.500 mm, razmak osovin: 1.030 mm, nosilnost na stojalo: 1.120 kg, Approx. 3.15 linear meters cantilever racking with shelf panels, 60 cm deep, height: 250 cm, 140 kg/arm, META Multistrong Specifications: - Height: approx. 250 cm - Depth: approx. 81 cm - Length: approx. 315 cm - Cantilever arms: approx. 60 cm - Axial dimension: 103 cm - NEW, available immediately from stock. - 140 kg load capacity per arm - 1120 kg load capacity per upright - Uprights in RAL5010 (gentian blue) - Cantilever arms in RAL5010 (gentian blue) - Arms are hooked in and secured with locking pins - Arm height adjustable in 70 mm increments - Levels: base + 4 storage levels (total of 5 storage levels) The rack consists of: - 4 x uprights, including base, approx. 250 cm, made from IPE120 - 16 x cantilever arms, approx. 60 cm, rectangular profile 40 x 30 mm - 12 x META shelf panels, approx. 100 x 60 cm - Includes all necessary connecting elements and bolts -- Immediately available -- Ncedpey Uh Rmefx Ah Ust Price: €1,765.00 net €2,100.35 gross You will receive an invoice showing VAT separately. Accessories such as floor anchors, impact protection, etc. can also be purchased from us. Transport: Delivery is provided upon request by our partner freight company; shipping costs depend on your postcode. Assembly: Our trained staff are happy to assist you with the professional assembly and dismantling of your warehouse equipment. Our recommendation: Let us know your requirements... We are happy to help you realize your projects—from planning and ordering to assembly.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 15.020 km, moč: 134 kW (182,19 KM), prva registracija: 07/1993, vrsta goriva: dizel, lastna masa: 7.520 kg, konfiguracija osi: 4x4, medosna razdalja: 3.800 mm, naslednji pregled (TÜV): 07/2026, gorivo: dizel, vrsta prenosa: mehanski, vzmetenje: jeklo, Leto izdelave: 1993, Odlično stanje S TÜV Dolžina za nadgradnjo ca. 3,60 m 4x4 pogon na vsa kolesa Listnato vzmetenje Avstrijsko vozilo Nsdpfxoyzrp Ho Ah Usct Originalno le 15.020 km Popolno za predelavo v avtodom

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolt system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams, 1,500 mm cantilever, pre-drilled for on-site roof construction (*excluding timber purlins and trapezoidal sheets for the roof construction) - Including longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and system can be extended at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction using IPE profiles - Surface of all components hot-dip galvanized Ncodpfsh R Taqox Ah Ust - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,500 mm center-to-center spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with scheduling prior to delivery. Material is sensibly packed for easy unloading. The installation surface must be concrete, level, suitable for dowelling, and able to withstand the loads applied. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any official permits that may be required. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to occupational health and safety regulations, it is recommended that the rack uprights have at least 500 mm clearance above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Nedpfx Aemhhy Noh Usct Our cantilever racks are produced exclusively in Germany. We offer reliable freight shipping with prior delivery notification. The material is packed appropriately to enable easy unloading. The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Tilting spindle moulder MAKA SF 4510 / GRIGGIO with power feed Very good condition, the machine comes from a small village joinery with 3 people Everything works flawlessly All bearings and guides are in good condition, the machine runs very smoothly Comes with a milling fence where one fence jaw can be adjusted in depth and features fine adjustment with a scale, allowing for jointing operations, e.g., when processing a gluing profile The entire milling fence can be finely adjusted using a set screw, enabling very precise settings With spindle lock via locking lever Efficient chip extraction, with two 120 mm extraction ports at the fence and on the machine Fitted with a 30 mm spindle, steplessly tiltable from -5° to 45°, tilting is adjusted via handwheel, and there is a precise degree scale Ncsdpsy Rh Nzofx Ah Ujt With forward/reverse rotation The machine is personally delivered and demonstrated by us throughout Germany for €220.00, so you face no risk on purchase. Delivery to other EU countries is also possible Large table opening, which can be reduced with various rings (thus allowing the use of cutters with very large diameters and enabling safe use of small cutters) Speeds of 3200, 4200, 6000, and 8000 rpm Spindle height adjustment is also via a handwheel with locking screw With exchangeable spindle (a 40 mm spindle can also be used) Optimal power transmission via V-belt drive The machine table is 1070 mm wide and 940 mm deep Ready to work immediately 380 V, 5500 W, with motor circuit breaker for overload protection Year of manufacture: 1999 Weight: approx. 700 kg CE marked With operating manual, motor brake, and emergency stop; the machine meets all requirements of the German Woodworkers' Association (Holz-BG) Additionally, you receive a 3-roller feed unit by HAFFNER with 8 speeds Optimal, simple, fast, and safe handling

Stanje: zelo dobro (rabljeno), Nizkotemperaturni kotel Viessmann Vitoplex/105kw z oljnim kotlom Nodjwauaxjpfx Ah Uoct

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25MythoSarya05, Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck Ncsdjykuh Nepfx Ah Uot MAST VERSION Wrapping height 2,450 mm 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23NEOS06, Exhibition Unit Stretch Wrapper ATLANTA NEOS ARYA system for automatic film blowing and cutting. 99 individually programmable settings Includes 1 remote control – additional units optional Wrapping height: 2150 mm Mast height: 2050 mm (fits through almost any door) Film powerstretch: 120–400% Motorized pre-stretch system with infinitely variable adjustment Pre-stretch ratio adjustable via control panel from 120 to 400% Film tension electronically monitored via control unit Quick-loading IEF system for easy film roll change Film specification: max. external diameter Ø300 mm – height: 500 mm – core Ø76 mm Automatic film cutting unit Film tension can be saved in 4 steps TECHNICAL DETAILS: Two maintenance-free AGM batteries 12 V – 100 Ah connected in series At least 160 pallets per charge – charging time: 8–10 hours High-frequency battery charger with LED display Wrapping height: “Machine with MAST (pallet included) 2,150 mm Height detection via photo sensor or direct input on display Safety bar for emergency stop of drive unit Emergency stop switch according to CE regulations Audible warning signal and beacon when machine starts Fall protection for film carriage Push button for start & stop Machine operation according to CE standards Ø22 mm Ncedpoyktv Sofx Ah Ujt ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All functional parameters adjustable via display - Program change lock - Adjustable machine speed around pallet up to 80 m/min Carriage speed up and down independently adjustable - Carriage up speed: 1.3 to 5.4 m/min - Carriage down speed: 1.3 to 5.4 m/min - Number of wraps at pallet base (1–10 layers) - Number of wraps at pallet top (1–10 layers) - Adjustable pallet wrapping height - Film application tension base & top wraps / ascent & descent independently adjustable - Film pre-stretch base & top wraps / ascent & descent independently adjustable - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL: 99 savable wrapping programs for SFERA EASY - Cross wrapping (up/down) - Single wrapping (only up or down) - Wrapping cycle with defined start and stop height - Wrapping to a preset height (with photo sensor deactivated) - Wrapping cycle for large-size pallets - Wrapping cycle for top sheet film - Soft start cycle for edge protection application - Wrapping cycle with reinforcement and adjustable number of wraps Soft start for reducing film tears at sharp pallet edges Wrapping cycle with manual or motor stringing (optional) Further machines available from stock in Ludwigsburg #Atlanta #Neos #Arya #Sfera #MobileWrapping #StretchWrapper

Leto izdelave: 2021, obratovalne ure: 10 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S21MythoEasyLow04, Ex-demo machine - like new. MYTHO EASY Low Very low-profile unit Wrapping height: 2400 mm Turntable: 1650 mm LP flat turntable: 30 mm low – 500 mm long Max. load weight: 1200 kg PowerStretch 200%, adjustable via gears to 150-200-250% Automatic, adjustable double roping system – see pictures. Automatic film cutting Optional: film clamp on turntable German Schuko plug 6 individually programmable settings Additional demonstration units available from stock for immediate delivery. Ncjdpfx Ahox Ta Nxo Ust Prices ex stock Ludwigsburg.

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Wrapping height 2,450 mm 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Ncsdpjykud Rsfx Ah Uet Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control

Leto izdelave: 2025, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Nodjyktrtspfx Ah Uoct Wrapping height 2,450 mm 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / Base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" Pre-stretch ratio set to 200% Film application tension electronically adjustable in the programs in various steps Turntable height: 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed upward/downward Acoustic signal at start of wrapping and end of cycle Emergency stop button according to CE regulations Turntable always stops in the same home position Fall protection for film carriage Push button for machine power on as well as start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL Ncodoykub Aepfx Ah Ust All function parameters adjustable via display F00 – Display lock for program editing F02 – Infinitely variable turntable speed 5–12 rpm Carriage speed upward and downward independently adjustable F03 – Carriage speed upward from 1.3 to 5.4 m/min F04 – Carriage speed downward from 1.3 to 5.4 m/min F05 – Number of wraps at pallet foot (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Delay for photocell wrapping height F13–F16 – Film application tension at foot & top wraps / ascent & descent independently adjustable F62 – Ergonomic height for film change Display of film consumption (optional) ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 6 storable wrapping programs F01-1 – Cross wrap (up/down) F01-2 – Simple wrap (only up or only down) F01-3 – Push button for manual functions F10–F11 – Wrapping cycle with defined start and stop heights F12 – Wrapping to a predefined height (deactivating the photoelectric height sensor) F22/F23 – Wrapping cycle for top sheet application F29 – Soft start cycle for application of edge protection F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized roping (optional) Reinforcement cycle via push button Optional features: Turntable size up to Ø2,600 mm Mast height up to 3,900 mm Ramp Installation frame Photoelectric sensor for dark products Film cutting device etc. Additional machines available from stock in Ludwigsburg. Pictures may include optional equipment subject to surcharge. Images similar to actual product.

Leto izdelave: 2026, stanje: novo, Our KVK 1A is an almost identical sister model to the KVK 2 (MA), meaning it is a semi-automatic stretch wrapper with a turntable. In comparison to the KVK 2 MA, it is equipped with a recess that allows for ground-level loading with a manual pallet truck. The only operations that must still be performed manually on this wrapper are attaching and cutting the film. Weighing 700 kg, this model is also designed for professional use and has a load capacity of up to 1,500 kg. The 1A features a 1,500 mm turntable and, as standard, can wrap pallets up to 2,400 mm in height. Both turntable and film carriage speeds are adjustable, and the very finely adjustable electromagnetic brake is controlled via potentiometer, allowing you to tailor the automated wrapping process perfectly to your product. Automatic pallet detection via photocell comes as standard, as do adjustable top and bottom wraps. Wrapping programs are available for "up only," "up & down" (cross wrapping), and "weatherproof" modes. The machine can also be operated manually if required. If the wrapper needs to be relocated temporarily, it can be easily lifted and moved by forklift via integrated cutouts. In addition to a photocell for detecting dark packages or black film, the KVK 1A offers an optional variable wrapping height of up to 3,200 mm. Recommendation: The KVK 1A is ideal where ramps cannot be used due to space constraints or when particularly heavy or unstable goods should not be pushed onto the turntable via a ramp. Nodpfxey Drhzs Ah Uect For further information, we have attached the technical data sheet as a PDF to this advertisement!

Leto izdelave: 2026, stanje: novo, Our KVK 1A is an almost identical sister model to the KVK 2 (MA), meaning it is a semi-automatic stretch wrapper with a turntable. In comparison to the KVK 2 MA, it is equipped with a recess that allows for ground-level loading with a manual pallet truck. The only operations that must still be performed manually on this wrapper are attaching and cutting the film. Weighing 700 kg, this model is also designed for professional use and has a load capacity of up to 1,500 kg. The 1A features a 1,500 mm turntable and, as standard, can wrap pallets up to 2,400 mm in height. Both turntable and film carriage speeds are adjustable, and the very finely adjustable electromagnetic brake is controlled via potentiometer, allowing you to tailor the automated wrapping process perfectly to your product. Automatic pallet detection via photocell comes as standard, as do adjustable top and bottom wraps. Wrapping programs are available for "up only," "up & down" (cross wrapping), and "weatherproof" modes. The machine can also be operated manually if required. If the wrapper needs to be relocated temporarily, it can be easily lifted and moved by forklift via integrated cutouts. In addition to a photocell for detecting dark packages or black film, the KVK 1A offers an optional variable wrapping height of up to 3,200 mm. Recommendation: The KVK 1A is ideal where ramps cannot be used due to space constraints or when particularly heavy or unstable goods should not be pushed onto the turntable via a ramp. Njdpfx Ajy Drfyjh Usct For further information, we have attached the technical data sheet as a PDF to this advertisement!