Závod Kobzarenko Mobilní Nakládač Vozů Rvm 180E nakup rabljenega (986)

Stanje: rabljeno, Leto izdelave: 2021, obratovalne ure: 3.300 h, Funkcionalnost: popolnoma funkcionalen, Base Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, approved for road use up to 80 km/h Braking system incl. ABS and lighting compliant with EC Directive Tyres: 385/65 R22.5 Permissible total weight: 32,000 kg Hydraulically adjustable support legs Splash protection (inner and side mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm complies with EUROMOT V emission standard Auxiliary hydraulic connection, 20 l/min Load-dependent control of feed material including automatic reversing scraper floor Separate drives for feed roller and scraper floor (twin drive) Fuel tank: 2 x 450 litres Feed roller: Length 1,690 mm, diameter 510 mm, with mounted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally arranged lubrication strips Kjdpfoxx Tigox Al Nodk Electric pump for cylinder functions (e.g. raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, disengaging travel drive) when engine is stopped 24V electrical control system Separate control box at the rear of the machine Hydraulically foldable Multimesh fine shredding basket (mesh size from 30 - 280 mm, gradation available on request) incl. one-piece rear flap Rear conveyor: length 7,500 mm, width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. antimagnetic centre section Underscreen conveyor: length 3,800 mm, width 1,400 mm Moistening system for external water connection Scraper floor with 71 slats Wear protection in the drum area Reinforcement plates on both sides of the feed hopper (made of wear-resistant steel) Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paint: RAL 2011 deep orange Optional Equipment: Hydrostatic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication system Engine compartment protection plate Lighting package: Engine compartment and rear conveyor Watering system Delivery date by arrangement Available from 06/2026

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 3.000 h, Funkcionalnost: popolnoma funkcionalen, Basic package Inventhor 6: Load-sensing system Fuel tank 500 liters Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally arranged wear strips 24-V electrical control – with additional electric pump for operating the following functions when the engine is off: Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP maintenance doors Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Kdjdjxx N T Ijpfx Al Njk Three-sided loading protection Folding hopper Fire extinguisher Service ladder Toolbox Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Optional equipment: 310 kW powertrain – EV 3-axle drawbar chassis unit Shredding system Size L-C3 600/4-30Z Size L limiter Auxiliary hydraulic connection 35 – 80 l/min Hydrostatic drive Hopper extension 350 mm, watering left Rear conveyor 7 m Overband magnet neodymium Frame for 7 m overband magnet Central lubrication Special paint finish in RAL Delivery date by arrangement

Stanje: rabljeno, Leto izdelave: 2021, obratovalne ure: 4.826 h, Equipment: Basic package Inventhor Type 9 MTU diesel engine 6R1300, 390 kW at 1,700 rpm, compliant with EUROMOT V emission standard Auxiliary hydraulic connections: 30 l/min and 70 l/min Roller drive via planetary gearbox 380 kW – VARIO – Load-sensing system Fuel tank: 950 liters Discharge conveyor: belt length 4,450 mm, belt width 1,000 mm Centrally positioned wear strips 24 V electric control system Additional electric pump for operating the following functions when the engine is off: Raise/lower/fold discharge conveyor, open/close comb flap, open/close comb, lift/lower optional permanent magnet belt, lift/lower optional folding hopper Complete radio remote control Kdodpfxsvnmldj Al Nek Large side GRP maintenance doors Easy-access engine compartment with LED lighting Hydraulically reversible fan Loading protection on both sides Fire extinguisher Maintenance ladder Toolbox Audible start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Special equipment: 500 mm track undercarriage unit Track undercarriage 500 mm flat Shredding system Size "L" – VARIOMAT Size "L" – "Limiter" (20 pieces) Discharge conveyor: 7 m length, 1,200 mm wide LED lighting package for engine compartment and rear Watering system with hopper extension H = 300 mm Frame for overband magnet 2 t permanent overband magnet

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 1.150 h, Funkcionalnost: popolnoma funkcionalen, Basic package Inventhor 6: Load-sensing system Fuel tank 500 liters Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally positioned wear strips 24V electrical control – additional electric pump for actuating the following functions when the engine is stopped: raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP service doors Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan wheel Three-sided loading protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Audible start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Kdjdoxx N Dgepfx Al Nek Optional equipment: 260 kW drive train – EV 2-axle semi-trailer chassis unit Size L shredding system – 20 teeth Size L limiter Auxiliary hydraulic connection 35 – 80 l/min Hydrostatic drive Hopper extension 350 mm, watering system both sides Size L hopper wedge with brush NM 7 m rear conveyor Overbelt magnet neodymium Frame for 7 m overbelt magnet Delivery date by arrangement

Stanje: dober (rabljeno), Leto izdelave: 2022, obratovalne ure: 2.100 h, Funkcionalnost: popolnoma funkcionalen, Wyposażenie: Pakiet podstawowy Inventhor Type 6 - System load-sensing - Zbiornik paliwa 500 litrów - Taśma podłużna: długość taśmy 2.900 mm, szerokość taśmy 800 mm - Centralnie rozmieszczone listwy smarujące - Sterowanie elektryczne 24 V – dodatkowa pompa elektryczna do obsługi następujących funkcji przy wyłączonym silniku: "Podnoszenie/opuszczanie/zaginanie taśmy tylnej, otwieranie/zamykanie klapy grzebieniowej, otwieranie/zamykanie grzebienia, podnoszenie/opuszczanie kosza składanego" - Pełna radiowa zdalna obsługa - Duże boczne drzwi serwisowe z tworzywa GFK - Przestronna komora silnika ułatwiająca serwisowanie - Pakiet oświetlenia LED: komora silnika i tył - Hydraulicznie odwracalny wentylator chłodzący - Trójstronna ochrona załadunku - Kosz składany - Gaśnica - Drabina serwisowa - Skrzynka narzędziowa - Dźwiękowy sygnał ostrzegawczy podczas rozruchu - System telematyczny Doppstadt - Lakier: RAL2011 głęboki pomarańcz Wyposażenie dodatkowe: - Układ napędowy 310 kW – napęd elektryczny - Podwozie z dyszlem, 3-osiowe - System rozdrabniający Size L 600/4–30 Z - Dodatkowe złącza hydrauliczne 35–80 l/min - Napęd hydrauliczny Kdjdpownfwqsfx Al Njk - Taśma wyładowcza tylna 4,9 m - Separator nadtaśmowy neodymowy - Rama do separatora nadtaśmowego

Stanje: rabljeno, 🧰 Lastnosti izdelka • Proizvajalec: Bauer • Stanje: rabljeno • Barva: oranžna • Prostornina: 2000 l • Lastna teža: 680 kg • Dolžina: 270 cm • Širina: 115 cm • Višina: 180 cm • Nosilnost: 2.120 kg • Dovoljena skupna masa: 2.800 kg • Rezervoarji so bili očiščeni 💰 Cena € 900,- neto brez DDV • Količinski popust: na zahtevo • Stroški pošiljanja: po vsej Evropi na zahtevo • Dobavni rok: takoj dobavljivo • Ogled in prevzem: kadarkoli po dogovoru možno Stalno na zalogi več kot 5000 tm paletnih regalov različnih proizvajalcev Kjdpfx Aljuwc Rxj Nodk (Spremembe in napake v tehničnih podatkih, informacijah in cenah ter predprodaja pridržani! Glejte naše splošne pogoje, vse cene brez DDV iz skladišča.)

Leto izdelave: 2023, stanje: novo, Mobilni kompleks za čiščenje avtomobilov z ozonom, model Celette Trioxyclean, Francija. Na voljo 6 enot. Hitro in popolnoma razgrajuje škodljive hlapne organske spojine v vozilu, kot so formaldehid, amonijak, benzen, TVOC (skupne hlapne organske spojine) itd., odstranjuje neprijetne vonjave cigaretnega dima, alkohola in hrane, učinkovito uničuje lebdeče bakterije in viruse ter ščiti potnike pred navzkrižno okužbo. Kdjdpeu Dpygsfx Al Nok Ozon (O3) kapaciteta: 5000 mg/h Negativni ioni: 8–10 milijonov Koncentracija ozona: 15–25 mg/l Stopnja sterilizacije: 99,99 % Hlajenje: zračno hlajenje Napajanje: 220/110 V | 50Hz/60Hz Teža: 37 kg Dimenzije (D × Š × V) v cm: 55 × 40 × 126

Stanje: novo, Exhibition machine Type A according to DIN EN 16770:2018 Without fire extinguishing system, tested in accordance with GS-HO-07 test principles of the BGHM. The dust extractor is a mobile extraction and filtration unit for industrial applications, designed for placement in the work area. The dust extractor is suitable for collecting, conveying, and separating dry wood, paper, or plastic chips and dust at various processing machines. Comprising a vacuum-resistant housing with suction nozzle and non-return flap, antistatic filter elements with jet-pulse cleaning, a high-performance radial fan with three-phase motor (energy efficiency class IE3) located on the clean air side, as well as integrated exhaust silencing and air outlet grille. Equipped with 2 swivel and 2 fixed castors, 2 chip containers with collection bags, and a control system with 5 m connection cable and CEE appliance plug. The control system is designed for automatic operation. Automatic start control for up to 6 machines and automatic filter cleaning with runtime extension are included. For automatic startup, either monitoring coils or volt-free machine contacts can be used. Single-coat PVC paint finish in RAL 9006 (white aluminum). Delivery in fully assembled, ready-to-operate condition. For filter cleaning, adequately prepared compressed air must be provided on-site (connection via plug nipple NW 7 / 6 bar). Technical data: Suction nozzle: Ø 250 mm Residual dust content: < 0.1 mg/m³ H3 Filter area: 21 m² Cleaning: Offline - compressed air jet pulse Compressed air supply: 6 bar (connection via plug nipple NW 7) Airflow: 4,500 m³/h Rated airflow (at 20 m/s at the suction nozzle): 3,530 m³/h Negative pressure (at suction nozzle, rated airflow): 2,700 Pa Sound pressure level MAX (distance to unit 1m): 67 dB (A) Fan motor: 5.5 kW, 230/400 V, 50 Hz, 3,000 rpm, IP 54 Operating mode: continuous, intermittent Collection drum volume: 2 x 165 l Dimensions (L x W x H): 2,130 (2,540) x 900 x 1,962 mm Weight: approx. 705 kg Accessories: 1 frequency converter 5.5 kW for the fan of the SMU dust extractor, manufacturer Eaton (Item no. 114004) with control integrated into the dust extractor’s control panel to maintain constant airflow during filter saturation, including safe fan shutdown during filter cleaning. Individual adjustment of suction pressure / airflow as required. The converter increases system efficiency, saves energy, and reduces wear on materials and machinery. Technical features: - Motor rating 5.5 kW, - Integrated PID controller, - Automatic energy optimization, - Integrated manual/automatic changeover, - Commissioning menu for rapid parameter setup, - Integrated radio interference filter according to EN 55011-1B, Kjdjvwfu Nopfx Al Njdk - Synchronization with freely rotating motor shaft, - Including pressure transducer 0-50 mbar (pressure cell). 1 slide valve control for 1 – 8 processing machines (Item no. 113197) Activation of up to 8 electro-pneumatic shut-off valves in the extraction ductwork at the respective processing machines, triggered by volt-free contacts or monitoring coils on the machines. 8 monitoring coils STWA1 (Item no. 600668) for contact monitoring at the processing machines, suitable for all STW types.

Stanje: kot nova (razstavni stroj), Description: Kdedpfx Ajvwflnsl Njk Vacomat 140/160 XPe - The mobile dust extractor Vacomat 140/160 XPe is our smallest model and is ideal for single-machine extraction. Airflows of up to 1,593 m³/h can be conveyed using this negative pressure extraction system, e.g. for the extraction of panel saws, jointers, or thickness planers. - In the standard configuration, extraction is started manually at the touch of a button. Upon request, an automatic start of the fan can be installed so that extraction begins as soon as the connected processing machine is switched on. This prevents forgetting to activate extraction or unnecessary idling. - The dust and chip mixture is discharged into a dust-tight chip collection container (240 l) fitted with a plastic liner. A vacuum channel securely holds the plastic bag inside the collection container. Viewing windows make it easy to monitor the fill level. - The mobile extractor Vacomat 140/160 XPe automatically monitors its extraction performance via a pressure sensor and ensures maximum operational safety. Filter Cleaning - On the Vacomat 140/160 XPe, an integrated control panel activates an electric/mechanical shaking motor to clean the filter sleeves. Control is managed via feedback from the woodworking machine using potential-free contacts. Once all connected machines are switched off, the filter shaking process starts automatically. For this regeneration mechanism, no compressed air connection and thus no compressor is required. As a result, noise levels are significantly reduced during cleaning. - For very high and especially fine dust levels, an efficient pulse-jet filter cleaning option (XPe-D) is recommended (NOTE: Overall height +100 mm, length +280 mm). Filter cleaning using the compressed air tank is performed offline, after the extraction process. SCHUKOCONE FILTER - The mobile dust extractor Vacomat 140/160 XPe is supplied as standard with patented SchukoCone® filter sleeves. - The SchukoCone® filter is an innovative combination of an outside-loaded filter sleeve with an inside-loaded cone. This filter design offers approximately 60% more filter area with a smaller footprint. - SchukoCone® filter sleeves fully demonstrate their potential especially for fine dusts, where large filter area and low filter load are crucial. - Lower filter load results in a longer filter service life. A lower filter resistance means less fan output and, consequently, reduced energy consumption. ASSEMBLY & DELIVERY SCOPE - Mobile dust extractors of type Vacomat 140/160 XPe are delivered pre-assembled and ready to plug in (3-phase, 16 A, with 6.0 m cable) on a disposable pallet (included). A chip collection bag (size V) is also included. - The Vacomat 140/160 XPe must be connected electronically to the machine to be extracted, so that automatic regeneration of the filter sleeves is triggered once the processing machine is shut down. A certified electrician can help with this. The supplied control panel with integrated phase inverter is prepared for a potential-free contact query and three current transformer coils (coils not included). - With a flexible hose or a fixed pipeline...

Stanje: rabljeno, Dimensions (Length/Width/Height): 1400/2000 x 1400 x 3000 mm Connection diameter: 2x 220 / 1x 180 mm with 14 suction nozzles pneumatic slide valve control fan discharge negative pressure system in compact design with 12 built-in automatic slides used, in good condition Manufacturer: ALKO Type: FU-2-12-800-70-III-A No.: 910225 Length: 1400 / 2000 mm Width: 1400 mm Height: 3000 mm 12 x suction nozzles D 180 with slide valves 2 x suction nozzles D 220 without slide valves cladding shaking device with discharge via fan complete control system air recirculation return/exhaust air D approx. 500 mm with 2 fans Kodpsvwfu Asfx Al Njdk 0.9 + 3.0 kW pole-changing motors each 1450 / 2800 rpm Location: 97447 Gerolzhofen Handover in current condition, free loaded without guarantee or warranty

Stanje: rabljeno, moč: 1,1 kW (1,50 KM), vhodna napetost: 380 V, volumenski pretok: 2.000 m³/h, premer sesalne cevi: 140 mm, filtrirna površina: 1,65 m², skupna višina: 1.900 mm, skupna dolžina: 1.100 mm, skupna širina: 650 mm, skupna masa: 50 kg, premer povezave za izpihovanje: 140 mm, nazivni pretok: 2.000 m³/h, negativen tlak: 1.800 Pa, nazivna moč: 1,1 kW (1,50 KM), potrebna višina: 1.900 mm, zahteva za prostor dolžina: 1.100 mm, potrebna širina: 650 mm, transportna dolžina: 1.100 mm, transportna širina: 650 mm, transportna višina: 1.900 mm, No. 3258 Kdedpfx Aox Hi Rxel Nsk Mobile Extraction Unit / Mobile Dust Extractor Scheppach HA 3200 Used For extracting planer chips, milling chips, sawdust, and sanding dust Motor: 1.1 kW, 380 V Airflow: 2000 m³/h Maximum pressure differential: 1800 Pa Extraction port diameter: 140 mm Impeller diameter: 320 mm Special filter diameter: 500 mm, height: 800 mm Filter area: 1.65 m² Mobile extraction system with 2 swivel castors Transport dimensions approx. 1100 x 650 x 1900 mm (L x W x H) Weight approx. 50 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, transport, or installation included Dismantling, loading, and transport by us optional upon request Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical data, condition description, year of construction, and scope of delivery according to manufacturer’s brochure and/or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; sale is as seen Pictures and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or shipping Delivery terms: Ex location

Stanje: rabljeno, moč: 1,1 kW (1,50 KM), volumenski pretok: 2.000 m³/h, premer sesalne cevi: 140 mm, filtrirna površina: 1,65 m², skupna višina: 1.900 mm, skupna dolžina: 1.100 mm, skupna širina: 650 mm, skupna masa: 50 kg, premer povezave za izpihovanje: 140 mm, nazivni pretok: 2.000 m³/h, negativen tlak: 1.800 Pa, nazivna moč: 1,1 kW (1,50 KM), potrebna višina: 1.900 mm, zahteva za prostor dolžina: 1.100 mm, potrebna širina: 650 mm, transportna dolžina: 1.100 mm, transportna širina: 650 mm, transportna višina: 1.900 mm, No. 3257 Mobile Extraction Unit / Mobile Dust Extractor Scheppach HA 3200 Used For extracting planer shavings, milling chips, sawdust, and sanding dust Motor: 1.1 kW, 380 V Airflow: 2000 m³/h Max. pressure difference: 1800 Pa Extraction connection diameter: 140 mm Impeller diameter: 320 mm Special filter diameter: 500 mm, height: 800 mm Filter surface area: 1.65 m² Mobile extraction unit with 2 swivel castors Transport dimensions approx. 1100 x 650 x 1900 mm (LxWxH) Weight approx. 50 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, transport or installation Dismantling, loading, and transport by us available as an option Errors in description and price reserved To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sale is as-is Technical specifications, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure or previous owner, without warranty Subject to prior sale Kdodpjx Hi H Hefx Al Njk For used machines, any warranty is excluded, applies as: "sold as seen" Pictures and videos serve as examples and do not represent the actual scope of delivery Payment terms: prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex works

Stanje: rabljeno, Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.400 mm, dolžina pomika po osi Y: 650 mm, dolžina podajanja os Z: 850 mm, največja hitrost vretena: 3.000 obr/min, sprednja in navpična os Kedpfxjxhfmij Al Nodk

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 10.000 mm, pomik osi Y: 1.250 mm, pomik po osi Z: 2.500 mm, Oprema: dokumentacija / priročnik, Zayer mobile column milling machine, horizontal travel 10,000 mm, vertical travel 2,500 mm, ram travel 1,250 mm, spindle speed 1,800 rpm, 30-position tool magazine, year 1994, Heidenhain 415b control with 15" LCD display replaced last year, spindle taper re-ground in October 2024 (ISO 50), regularly maintained. Currently in operation. Kodpfowhd Alex Al Njdk

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Odsesovalnik žagovine SCHUKO STA 5,5 kW Širina: 2200 mm Višina: 3600 mm Globina: 1100 mm Dolžina vreč: 200 cm Premer filtrirne rokave: 140 mm Kdedex I N A Djpfx Al Nsk Število filtrirnih rokavov: 54 kos Zbiralne vreče: 3 kos Premer zbiralne vreče: 500 mm Priključek: 250 mm Moč glavnega motorja: 5,5 kW Sistem stresanja filtrirnih vreč Odsesovalne cevi vključene

Stanje: novo, Leto izdelave: 2026, Extraction capacity approx. 5,200 m³/h Motor power 3.0 kW Speed 3,000 rpm Rated voltage 400 V, 50 Hz Extraction nozzle 250/200 mm Extraction velocity 28 m/s Number of filters: 28 Kdedpfjlkd Sdsx Al Nek Negative pressure 2,800 Pa Filter category G Polyester filter material Sound level 80 dB without connection / 65 dB when connected to the machine via pipe Filter area 13.7 m² Dimensions (L x W x H) 2,000 x 750 x 1,980 mm Weight 182 kg

Stanje: novo, Leto izdelave: 2026, Technical data: • Complies with H-2 standard • Extraction capacity – approx. 6500 m³/h Kodpfxod H Rfas Al Nsdk • Motor power – 5.5 kW • Speed – 3000 rpm • Voltage – 400 V, 50 Hz • Extraction port – 280/200 mm • Filter surface – 22 m² • Airspeed – 28 m/sec. • Number of filters – 35 • Dimensions – 921 x 1982 x 2271 mm • Weight – 350 kg • Filter category – G • Filter material – polyester • Noise level – 80 dB (stand-alone), 65 dB when connected to the machine via ductwork Scope of delivery: • Polyester filter, 5 microns • 2 containers • Mobile base • Filter cleaning via vibration system with control unit + 850 euros for models with fire extinguisher (Safe System) + 1000 euros for models with inverter (variable speed control)

Stanje: novo, Leto izdelave: 2026, Sawdust extraction unit HOLZING RLA S 300 8900 m³/h Extraction capacity: approx. 8,900 m³/h Motor power: 7.5 kW Speed: 3,000 rpm Rated voltage: 400 V, 50 Hz Extraction port: 300/200 mm Extraction velocity: 28 m/s Number of filters: 45 Kdedpfxolkd Spe Al Nek Filter category: G Filter material: polyester Noise level: 80 dB without connection / 65 dB when connected to the machine via ducting Filter area: 22 m² Overall dimensions (L x W x H): 2260/920/2140 mm Weight: 274 kg The extraction blowers are located in the vacuum chamber on the clean air side, housed in special sound-insulated enclosures. They feature a special impeller design that increases efficiency and effectiveness, while also contributing to energy savings.

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, *Vsi naši izdelki so izdelani skrbno in pokriti z enoletno garancijo! *Vgradnja in usposabljanje operaterja BREZPLAČNO Kedpfx Ajywf Ibsl Njdk Mobilna naprava za sejanje in pranje peska serije FABO MEY je idealna rešitev za klasifikacijo in pranje predhodno zdrobljenih materialov. Največja prednost naprave je, da so vse komponente nameščene na enem samem šasiju, kar omogoča enostaven transport z enim tovornjakom. TEHNIČNE SPECIFIKACIJE: - Zalogovnik: 8 m³ - Dimenzije naprave: 13500x4500x3600 mm - Proizvodna zmogljivost: 120–200 ton na uro - Spiralno pralo: 600x6000 mm, dvojna spirala - Vibracijsko sito in etaže: 1600x4500 (4 etaže) - Skupna moč motorja: 68 kW - Generator (opcijsko): 130 kVA MEY-1645 JE KOMBINACIJA: • Zaloga (Zalogovnik) • Vibracijsko sito s šobami za pranje • Spiralni pralnik z dvojno spiralo • Zložljivi dovajalni in zalogovni trakovi • Hidravlične noge • Mobilno šasije z osmi in pnevmatikami • Popolnoma avtomatiziran sistem • Vzdrževalni prehodi za enostavno servisiranje • Dizelski agregat (opcijsko) Za dodatne informacije nas prosimo pokličite!

Stanje: rabljeno, Leto izdelave: 2014, Pregled Ta robotski paletizator je bil izdelan leta 2014 pri nemškem proizvajalcu Kuka. Stroj ima 2 različni prijemalni glavi za ravnanje s KEG-i in plastičnimi zaboji. Opremljen je s 6 osemi in je v dobrem stanju. Stroj je bil letno vzdrževan, leta 2025 pa bo demontiran. Tehnični podatki Zmogljivost Odvisno od tvorbe slojev Opremljen za obdelavo: KEG-ov Modularnih zabojčkov Kdjdpfx Asyb Rycel Nsk

Leto izdelave: 2023, stanje: novo, SEMIX M160S4 zagotavlja najvišjo kapaciteto med vsemi mobilnimi betonskimi mešalnimi postajami na svetu. Kjdpfx Alsgazdio Nedk SEMIX Mobile 160S4 je opremljen z dvojnimi grednimi mešalniki za beton kapacitete 6000/4000 litrov. V SEMIXovih mešalnikih za beton se glede na razmerje silicija v betonski recepturi uporabljajo obrabne obloge NiHard4 ali Hardox 450. Dozirni zalogovniki za agregat se lahko polnijo z nakladalniki s kolesi preko enega klančine. Agregati se tehtajo na tehtalnem transporterju, ki nato agregate prenese na prenosni trak. Prisotnost dveh ločenih trakov zagotavlja natančnost tehtanja in visoko zmogljivost za doseganje večjih izhodov betona. Vsi SEMIX-ovi zalogovniki za agregat so upognjene trapezne oblike za dodatno trdnost. Vse SEMIX betonarne upravlja SCADA sistem z vgrajenim PLC krmilnikom Schneider. Uporabniki lahko spremljajo vse porabljene materiale in jih integrirajo v svoj CRM sistem. SEMIX-ova inženirska ekipa lahko na daljavo posega v avtomatizirani sistem za zagotavljanje podpore.

Stanje: zelo dobro (rabljeno), Oprema: Na voljo je tipska ploščica, Mobile tank systems for A1-A3 (KC diesel, KA petrol/diesel, as well as collection containers), - Double-walled construction - Capacities from 250 to 1000 litres - Partially IBC-certified - 12V / 24V / or 230V pumps available as required - Automatic dispensing nozzle - Vertical or horizontal design - Some units with lockable pump covers - Optional flow meter with daily and total counter - All systems supplied with a new DEKRA inspection Kdjdpfjgx E N Isx Al Nek Loading and transport can be organised. Only serious and genuine enquiries with the following details will be answered: Name, email address, and telephone number.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, moč: 389,81 kW (529,99 KM), Mobilna drobilna naprava DOPPSTADT AK 560 Eco Power Kjdpfx Alsw Rz Rqs Njdk Dizelski motor: 530 KM Koš za fino drobljenje (luknjičasta perforacija po dogovoru) Zadnji transportni trak z magnetnim valjem Twin drive (ločeni pogoni za strgalo in dovajalni valj) Hidravlični pogon (pohod v polžjem načinu) Daljinsko upravljanje s pomočjo radijskega signala

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Diesel engine: 430 HP Rear discharge conveyor Overband magnet Hydraulic drive system Radio remote control Kdjdpfxji Trvbj Al Nok Approval for speeds up to 80 km/h Financing can be provided if required. Financing and delivery available.

Stanje: rabljeno, vrsta prenosa: hidrostat, vrsta goriva: dizel, barva: rumena, skupna masa: 18.775 kg, konfiguracija osi: 4x4, število sedežev: 1, Leto izdelave: 2006, obratovalne ure: 18.459 h, Oprema: kabina, nadzor oprijema, pogon na vsa štiri kolesa, računalnik na krovu, zapora diferenciala, Kolesni bager Leto 2006 Dobro splošno stanje 1 žlica Kjdsyz A Rnjpfx Al Njdk Več informacij na spletni strani Almerisan