Yaskawa Robotska Celica nakup rabljenega (536)

Stanje: zelo dobro (rabljeno), Here we offer a Feutron climate test chamber. Feutron climate test chamber Temperature - Temperature range: -40...90°C - Climate range (without heat load): 10...85°C - Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min - Temporal temperature deviation during climate operation: ± 1.0...± 1.5 K/min - Rate of temperature change: - Heating: 2.0 K/min (average) - Cooling: 2.0 K/min (average) - Standard IEC 1646 is implementable including testing, solar modules up to a maximum weight of 160 kg, and non-linear ramps (setpoint jumps) Drying - Air drying: Condensation drying Humidity - Air humidification: Steam humidification - Humidity range: 10...95% RH - Temporal humidity deviation: ≤ ± 3.0...± 5.0% RH - Dew point range: 8...80.9°C Test Chamber - Test chamber volume: 7.0 m³ Dimensions - Test chamber internal dimensions (W x H x D): 1500 mm x 2250 mm x 2000 mm - Heated hinged door, DIN right, width: 900 mm x height: 2100 mm - Heated viewing window with blackout and lockable, width: 500 mm x height: 600 mm - Feedthrough openings: 2x on the right front side, Ø 75 mm - Irradiation unit inside test chamber - Cut-out: 4x in the left side wall for SC 2500, each 850 x 700 mm - Illuminated area with SC 2500: 1200 x 1200 mm Dodpfx Afjzd Sdgjuekt - Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² - Lighting: 1x halogen lamp 200W Refrigeration System - Bitzer semi-hermetic 2-stage compressor, air-cooled - Condenser: split condenser (for outdoor installation, winter mode) - Refrigerant: R507 / R23 Temperature Control System - Cooling brine medium: Tyfocor / water - Mixing ratio: 50/50% - Brine density: 1.072 kg/dm³ - Fill quantity: approx. 80 dm³ Pyranometer - Temperature range: -40...150°C - Maximum radiation uptake: 4000 W/m² - Spectral range (50% points): 305...2800 nm - Sensitivity (nominal): 7 µV/W/m² Power Supply - Test Chamber - Electrical connection: 400V, 3/N/PE, AC, 50Hz - Connection type: Hardwired - Maximum simultaneous power demand: approx. 32.0 kW - Circuit protection: 3 x 63, Char C (A) Power Supply - SolarConstant - Electrical connection: 400V, 3/N/PE, AC, 50Hz - Connection type: — - Maximum simultaneous power demand: approx. 30.0 kW - Circuit protection: 3 x 63, Char C (A) External Dimensions (including machine room/control cabinet and SolarConstant 2500 cabinet): - Machine room / control cabinet: width 3440 mm x height 2580 mm x depth 2950 mm - Control cabinet: width 2200 mm x height 1830 mm x depth 1100 mm - Split condenser: width 900 mm x height 950 mm x depth 2000 mm Weight - Total test chamber weight: approx. 2700 kg - Condenser weight (empty): 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see photo) (Specifications and technical data are subject to change and error!) We are happy to answer any further questions you may have by phone.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, obratovalne ure: 2.500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: E1361000, skupna masa: 600 kg, nosilnost: 8 kg, doseg roke: 2.028 mm, vrtilni razpon: 360 °, proizvajalec krmilnikov: Fanuc, model krmilnika: R-30iB Plus, proizvajalec programirnih enot: Fanuc, model učeče konzole: Fanuc A05B-2256-C101#EGN, širina krmilne omare: 600 mm, višina krmilne omare: 600 mm, vhodna napetost: 400 V, vhodni tok: 32 A, vrsta vhodnega toka: trifazni, varilni tok (maks.): 400 A, Oprema: dokumentacija / priročnik, Popolnoma funkcionalna robotska varilna celica v odličnem stanju. Robotska roka Fanuc in dvosmerni pozicioner, vir napajanja Fronius, naprava za dovajanje žice ter varilna pištola s sistemom potiskanja in vlečenja. Robot FANUC ARC Mate AM-100iC/8L Krmilnik R-30iB Plus Dvosmerni pozicioner FANUC A05B-1220-J201-N, nosilnost 500 kg Vir napajanja Fronius TPS 400i s paketom PMC Čistilec šobe Thielmann Dkodpfozu Irnsx Afuet Zaščitne zavese SICK Nameščen leta 2021 Robotska postaja je popolnoma operativna, v dobrem stanju in jo je mogoče videti v delovanju.

Stanje: rabljeno, MOTOMAN Yaskawa welding system Robot MH6 Controller NX100 250kg positioner/tilting-rotary table 2hfsnrw0 Equipped with Fronius TIG welding system! Complete with enclosure and safety technology. Dkjdpfetr Uiljx Afuet Full service package available! Consultation/assembly/commissioning/training Koppendorfer Robot Service has specialized in MOTOMAN Yaskawa robotics for 20 years. Many systems/robots/spare parts in stock! koppendorfer.de koppendorfer-firma (A) t-online.de

Stanje: rabljeno, Leto izdelave: 2023, Funkcionalnost: nepreverjeno, številka stroja/vozila: 7001922, vhodna napetost: 400 V, Z 4 roboti Fanuc M-20iD/12L. Postavitvene mere: 16000x4000x3400 mm Dodpfx Afsy T Ulzsujkt

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, HGG RPC 1200 – CNC robotska linija za obdelavo robov – leto izdelave 2017. 18 metrov dolžina valjev za dovod in odvod materiala. Staubli robotska roka s 6 osemi. Kjellberg plazemska naprava za fino obdelavo. Dkedozrp T Iopfx Afust Sistem za odsesavanje prahu. Kapaciteta 1200 mm.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20-3443, vhodna napetost: 400 V, skupna širina: 2.286 mm, skupna dolžina: 11.994 mm, skupna višina: 2.582 mm, temperatura: −80 °C, vrsta vhodnega toka: trifazni, hladilna zmogljivost: 12 kW (16,32 KM), vhodni tok: 63 A, temperatura okolja (min.): −20 °C, vhodna frekvenca: 50 Hz, okoljska temperatura (maks.): 42 °C, Ponujamo mobilno, redundantno hladilno skladišče za nizke temperature v izvedbi kontejnerja, ki je sestavljeno iz predprostora z delovno temperaturo -20 °C in skladiščnega prostora z nastavljivo temperaturo do -80 °C. Tehnični podatki Temperatura skladišča (nastavljiva): do -80 °C Dovoljena temperatura okolja: -20 °C do +42 °C Število hladilnih krogov: 4 Nivo zvočnega tlaka (1 m v prostem polju): 73 dB(A) Hladilni krog – stopnja 1 Hladilno sredstvo: R449A (GWP: 1.397) Število kompresorjev: 2 Izvedba kompresorjev: polhermetični batni kompresorji, regulirani s frekvenco Hladilni krog – stopnja 2 Hladilno sredstvo: R508B (GWP: 13.396) Število kompresorjev: 2 Izvedba kompresorjev: polhermetični batni kompresorji, regulirani s frekvenco Kondenzator Število kondenzatorjev (stopnja 1): 2 Oddana toplotna moč na kondenzator: 35,0 kW Ventilatorji na kondenzator: 2 Vrsta ventilatorja: EC-ventilatorji, regulirani s hitrostjo Nominalni pretok zraka na kondenzator: 8.800 m³/h Električni podatki Poraba moči v delovni točki (skupna): 24,2 kW Poraba toka v delovni točki (skupna): 43,9 A Priporočena zaščita: 2 × 63 A (CEE-priključek, redundantna) Napajanje: 400 V / 50 Hz / 3 f + N Upravljanje PLC: Siemens S7-1214C x 2 Nadzorni panel: Siemens TP900 Comfort, 9 palcev, 16,7 milijona barv x 2 Jeziki vmesnika: nemščina in angleščina Ogled Dedpfx Aszg Dtxefuskt Ogled naprave je možen kadarkoli v naši proizvodnji po predhodnem dogovoru. Po želji lahko napravo vključimo med ogledom, da se prepričate o njeni funkciji in učinkovitosti.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Our former assembly cell was in operation for only a few hundred hours (exact number unknown) and is no longer needed, as retrofitting to our new product is not worthwhile for us. The condition of all devices is very good due to the low usage—except for the batteries, which need to be replaced. The complete assembly/robotic cell has the following dimensions: Height: 169 cm, Width: 175 cm (150 cm + 25 cm), Depth: 130 cm, Weight: approx. 600 kg. The key components of the assembly/robotic cell are as follows: - Mitsubishi Robot Mod. RH-6SH5520-S312, year of manufacture 2010 - Mitsubishi Teaching Box Mod. R56TB, year of manufacture 2010 - 2x ETIPACK labeling device Mod. CLEAR13, year of manufacture 2010 Dsdpfx Afjri S Hkjuekt Many further details can be seen in the photos and in the documentation; we are happy to provide additional information upon request.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, nosilnost: 130 kg, doseg roke: 2.194 mm, natančnost ponavljanja: 0,06 mm, največja hitrost vretena: 24.000 obr/min, število osi: 6, The system is completely unused. The system includes: - 2 Stäubli robots with milling heads - 2 tool magazines with automatic tool changers - Control unit - Chip conveyor - Rotary table for pallet handling - Complete enclosure of the work area - Tool holders – pallets TECHNICAL DETAILS Number of axes: 6 Maximum payload: 130 kg Repeatability: ± 0.06 mm Arm Axis 1, working range: 360° Axis 2, working range: 235° Axis 3, working range: 285° Axis 1, max. speed: 160°/s Axis 2, max. speed: 160°/s Axis 3, max. speed: 160°/s Arm reach: 2,194 mm × 370° Wrist Axis 4, working range: 540° Axis 5, working range: 240° Axis 6, working range: 540° Axis 4, max. speed: 260°/s Axis 5, max. speed: 260°/s Axis 6, max. speed: 400°/s Spindle Type: POWERTECH PT400 Maximum speed: 24,000 rpm Tool holder: ISO30 taper Weight: 24 kg Maximum power: 13 kW Torque: 10.4 Nm MACHINE DETAILS Operating temperature range: 0–45 °C Ambient humidity: 20–80% r.H. Weight: 980 kg Dsdpfx Aoxt Nzbjfujkt Note regarding sale: The system was intended for milling roof racks. Unfortunately, during delivery, the user underwent a change of shareholders. The new shareholder did not take over the system. For further equipment details, please refer to the attached document.

Leto izdelave: 2013, stanje: rabljeno, Število strojev: 4 kosi Krmiljenje: Siemens Menjalnik orodij: 1 pozicija Sistem je sestavljen iz 4 strojev: Soraluce FR 9000I Soraluce RR 9000II Soraluce FP 8000 Soraluce PM 6000 mesta za pripravo obdelovancev nadomestne palete avtomatski sistem za dovajanje orodij WBG avtomatski paletni sistem regal za shranjevanje palet Tehnični podatki so podatki proizvajalca oziroma uporabnika in zato nezavezujoči za nas. Pridržujemo si pravico do vmesne prodaje; veljajo izključno naši splošni pogoji poslovanja in prodaje. O nas: več kot 400 lastnih strojev na zalogi več kot 15.000 m² skladiščne površine, nosilnost žerjava 70 t Dsdpfx Afoyr Skkeujkt več kot 10.000 artiklov dodatne opreme za vašo delavnico Če želite prodati stroje, proizvodne linije ali vaš obrat, nas kontaktirajte. Dodatne ponudbe najdete na naši spletni strani. Ogledi so možni po dogovoru. Veselimo se vašega obiska. Vaša ekipa Markus Hirsch.

Stanje: rabljeno, EMAG VL 4 je obdelovalna celica / vertikalni stružni stroj za visoko natančno proizvodnjo, visoko točnost in zanesljivo neprekinjeno delovanje. Kapacitete: 2 stroja, 2 osi; maks. dimenzija obdelovanca 200 mm; Z-os 400 mm; X-os 750 mm; revolver s 12 pozicijami, 12 gnanih orodij. Tehnični podatki: hitrost vretena do 6000 vrt/min, brezstopenjsko do 4500 vrt/min; moč vretena 25/18 kW; navor 280/202 Nm; priklop 3x400V 50Hz; skupna potreba 36 kW; dimenzije D5300׊2300×V3650 mm. Oprema: transportni trak za ostružke, avtomatska naprava za nakladanje/razkladanje, komplet držal za orodje, signalna opozorilna luč, rezervni deli. Dosega ozke tolerance; značilno za avtomobilsko, letalsko, strojno in medicinsko industrijo. Dkjdpfx Ajyxnyvjfujt

Leto izdelave: 2026, obratovalne ure: 7.000 h, stanje: rabljeno, Ponujamo rabljeno linijo za robotsko lakiranje CML Finishing Ghost C Master CML Ghost s 6 osmi, letnik izdelave 2018. Vključuje: - 1 kos robota Master CML Finishing Ghost C - 1 kos robota Slave CML Finishing Ghost C - 1 kos 3D skenerja za meritve dimenzij in globine - 2 kosa krmilnih omar z monitorji - 1 kos črpalka Graco Premier 800 - 5 kos črpalke Graco G36W05 - 1 kos lakirna kabina Belmeko z izpušnim in povratnim zračnim sistemom Dedpsyx Sv Usfx Afujkt Če imate kakršnakoli vprašanja ali potrebujete dodatne informacije, nas lahko kontaktirate po telefonu ali elektronski pošti.

Stanje: rabljeno, Prodajamo rabljeno robotsko polirno napravo. Naprava je v rabljenem stanju. Vključeno v ponudbo: 1x KUKA KR30/2 2x Robotski polirni stroj Dkodpsxlufvofx Afust 1x Dvojna drsna miza 1x Krmilna omara Za vprašanja nas kontaktirajte!

Stanje: dober (rabljeno), Prodajamo rabljeno robotsko brusilno in polirno linijo. Naprava je v dobrem, rabljenem stanju. Vključuje: - 1x industrijski robot YASKAWA MH20 z upravljanjem NX100 - 2x tračne brusilke za brusilne trakove s obsegom 3.500 mm - 2x polirni stroji z oscilacijo in pomikom za polirne kolute z maks. premerom 500 mm - 1x naložilna miza za palete z dimenzijami (DxŠ): 1.200 x 600 mm - 1x električna krmilna omara Za dodatne informacije nas kontaktirajte! Djdpfxexby Sge Afuokt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, 2-axis positioner - BEAR RT series Robot - Kawasaki BA006L, year 2019 Power source - Fronius TPS 400i, year 2019 Robot and positioner are in very good technical and visual condition, as shown in the photos. Currently in continuous operation. Dodpfsmu Agpex Afuekt

Stanje: rabljeno, Programming Console, Operator Panel, Robot Teach Pendant Robot Teach Pendant, Teachbox, Manual Control Station, Hand-held Panel BOSCH REXROTH Type: IndraControl VEH30.1 The VEH 30.1 is suitable for: 1. Operating and visualization of IndraLogic, IndraMotion MLC, IndraMotion MTX. 2. Commissioning of machines and systems. 3. Operation and diagnostics of large-scale handling systems. 4. Visualization of simple operator panels for assembly lines. Type No. VEH30.1BJN-128ET-G3D-128-BS-NN-FW Material No. R911170692-104-08W34-I-B-H-T Serial Number Year of Manufacture 2008 Firmware FWA-VEH*01-CWN-01V07-EN R911310833-103 Year of Manufacture: 2008 Operating System Windows CE 4.2 Interface 1x Ethernet (RJ45) Nominal Voltage 24 VDC Nominal Current 0.7 A Power Consumption max. 14 W Display 8.4" Touch TFT, 800 x 600 pixels Operation Touch and keypad operation with 34 keys Protection Class IP65 Dedpod Ab D Sjfx Afuekt - Connection cable approx. 8 m - 19-pin plug connector - Three-stage enabling switch - Flexible use thanks to hot-plug principle Weight 3 kg Fully functional, tested Good condition

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 21220, skupna masa: 8.600 kg, skupna širina: 4.000 mm, skupna višina: 3.100 mm, skupna dolžina: 9.400 mm, nosilnost: 180 kg, The system consists of the following components: - YASKAWA Positioner V2-500D3 (Year of manufacture: 2022, 466843-1-1) - LASO WP-SLK Welding Cell - YASKAWA Industrial Robot GP180 (Year of manufacture: 2022, Serial No.: 6V22Y2842450001) - NIMAK multiCONTROL Control Cabinet with Bosch Rexroth PRC7300 (Year of manufacture: 2023, Serial No.: 7261404217680) - RSP Weld Gun Changer System - NIMAK Welding Gun LRN 300-650-R54-175-150-P2U-WR (Year of manufacture: 2023, Machine No.: 2212–2129 N) - NIMAK Welding Gun CRN 300-650-R54-200-P2U-WL (Year of manufacture: 2023, Machine No.: 2212–2128 N) - Weld Gun Cleaning Station TECHNICAL DETAILS Djdjyft Evopfx Afuokt Positioner Control: LASO Industrial PC / Siemens S7 Yaskawa GP180 Payload: 180 kg Yaskawa GP180 Weight: 1,020 kg Yaskawa GP180 Controller: YRC1000 Yaskawa GP180 Teach Pendant: +RM1 Rotary Brush Cleaning Station: 2 x 180 x 150 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 9,400 x 4,000 x 3,100 mm Total Weight: 8,600 kg Type of Input Current: Alternating Current (AC) Input Voltage: 400 V Rated Power: 138 kVA at 100% duty cycle Rated Voltage: 400 V / 3 Ph / 50 Hz Cooling Type: Water-cooled EQUIPMENT - Servo rotary axis - Swivel unit - Penlink rotary unit - LASO Industrial PC / Siemens S7 control - Integrated pneumatic, coolant, and signal feed-throughs - Safety enclosure

Stanje: skoraj kot novo (rabljeno), Automatická linka, která byla používána k výrobě dvou milionů karamelových/jablečných toffee za období 6–8 týdnů. K dispozici jsou kompletní linky umožňující výrobu toffee polevy, tavení čokolády, automatické zasunutí tyčinek do jablek a následné robotické namáčení v polevě, načež je hotový produkt zabalen do flow-pack obalu. Dkodohtv Uwjpfx Afujt

Stanje: dober (rabljeno), Kompletna linija na voljo, ki je bila uporabljena za proizvodnjo karameliziranih jabolk za vodilnega proizvajalca v Angliji. Karamelizirana in sladkorirana jabolka so bila dobavljana večim vodilnim verigam supermarketov. Linijo sestavljajo kuhalni kotli za pripravo karamela, robotske linije za vstavljanje palčk v jabolka, njihovo pobiranje, pomakanje v karamel in odlaganje na hladilni trak, nato pa se izdelki transportirajo v flowpack zavijalke. Video posnetki so na voljo na zahtevo. Dodpfx Aopitkkofujkt

Stanje: zelo dobro (rabljeno), Spoštovani, Djdpfx Afjyrypzjuekt ponujamo vam rabljeno proizvodno celico v zelo dobrem stanju. Komplet sestavljajo štiri stroji: – Traub TNL 26 – Gildemeister GD 32 – Star SV-20 – Star SR-32 z ustrezno dokumentacijo, odsesovalnimi napravami in dodatno opremo. Za ponudbo nas prosim kontaktirajte.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, WELDING CABIN ABB WITH ROBOTS 1. GENERAL INFORMATION • Manufacturer: ABB • Model: FlexArc LX2 • Dimensions: 4.6 x 2.6 x 2.6 m • Weight: 5200 kg • Year of manufacture: 2005 • Previous use: Training workstation 2. CONSTRUCTION • Load-bearing frame • Metal walls • Roof with exhaust nozzle for connection to external ventilation • Service door with window, equipped with electric safety lock • Albany Rapid Protect 320 roll-up door with inverter • SICK horizontal safety light curtain in the loading/unloading area of the positioner • Siemens S7-300 controller • Siemens TP 170B color/5.7” touch control panel • Horizontal-axis positioner for mounting jigs/tools, model IRBP 250 L, lifting capacity 250 kg 3. ROBOTS • 2 robots: - 1 welding robot - 1 handling robot (can be used for welding after retrofitting) • Model: IRB 1400 • Version: M2004 • Year of manufacture: 2005 • Serial numbers: IRB1: 14-50257, IRB2: 14-50258 • Controller: IRC 5 • Operating hours: approx. 2000 • Automatic TCP measurement 4. WELDING EQUIPMENT • Welding power source: MIGROB 500 (ABB) – 1 unit • Spare welding power source: LRC 430 (ESAB) – 1 unit • Wire feeder: WIRE FEED UNIT A34E – PIB (ABB) – 1 unit • Cooler: OCE 2H (ESAB) • Torch cleaning unit TC96 – 1 unit • Wire cutting device – 1 unit Dkodsvbg Ufepfx Afujt

Leto izdelave: 2006, stanje: rabljeno, • Cutting height (mm): 200 • Cutting width (mm): 200 Dkedpfx Afsm E Uf Ajust

Stanje: dober (rabljeno), Leto izdelave: 2015, Thermocontainer used; however, in exceptionally good condition, ready for immediate use. Model: C-780ü (Various thermocontainers in stock, capacities from 580 to 1170 liters, see additional photos) Technical Data: Internal dimensions: 610 x 810 x 1570 mm External dimensions: 735 x 955 x 1900 mm Weight: approx. 98 kg Capacity: approx. 780 liters With slide-in rails for grids Features: Central door locking 2 side pull handles 1 folding handle recessed in the door Running gear with 108 mm PA wheels, suitable for cold storage Door retainer Inner tray with insertion rails Corner supports with bend protection PE panels (2 mm thick), light blue Profiled protective plates (3-sided) 2 fixed wheels, 2 swivel wheels Lockable with padlock Load capacity up to approx. 400 kg OVERHAULED Final cleaning to be carried out by the buyer Offer consists of one container Color selection subject to stock availability Approx. 100 units in stock Viewing is possible Tuesdays and Thursdays between 9:00 and 16:00 by prior telephone appointment. The item can be taken immediately if required. Dksdpfod Syg Sox Afust Unless explicitly stated otherwise, this offer is for used goods. Items have been visually inspected and are technically sound as far as can be determined. Shelves and cooling plates are not included. These are available from us upon request. For time reasons, we can only respond to this item if you provide a telephone number with your inquiry. Price stated is net per unit, plus the currently applicable VAT. All offers ex stock 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. (Photos are for reference only, as we cannot display every single item)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Complete robotic welding cell with rotary table and enclosure Robot: KUKA KR 150 R2700 extra Payload: 150 kg Dedpfonr E Enjx Afuokt Reach: 2,090 mm Equipped with welding gun (Dalex, new in 2018) including cooling system (closed-circuit water cooling) A complete second welding gun (manufacturer: ARO) is included in the scope of delivery Dedicated cooling unit integrated in the system Automatic rotary table with 10-position indexing (currently set up as 5-position for ongoing production) Workstation for loading and unloading parts is well-lit and secured with light barriers System control via Siemens PLC, programmed by HS Automation Siemens operator panel for system operation mounted at the loading station on a swivel arm All components enclosed within a safety housing with security door. The installation can still be inspected under power.

Stanje: zelo dobro (rabljeno), Epson G10-854SR Robot Assembly Station Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 Assembly Area Heatsink + Front Wall Bracket, and 3.3 Assembly Area Front. (KK = Heatsink, SW = Front Wall Bracket) St.3.1: Dispensing Area - A workpiece carrier (WT) with mounted chassis and PCB enters the dispensing area via the transfer belt. - It is stopped at the lift-positioning unit (HuPo), lifted off the belt and fixed in place. - Next, the x-y-z handling system moves the dispensing head to the specified location and starts the dispensing process. - After successful dispensing, the handling system moves into the park position and the WT is set back onto the belt. - The carrier is then conveyed to the Assembly Area Heatsink + Front Wall Bracket (provided there is no WT in the placement position). St.3.2: Assembly Area Heatsink + Front Wall Bracket - A WT moves from the dispensing area into the Assembly Area Heatsink + Front Wall Bracket via the transfer belt. - It is stopped at the lift-positioning unit (HuPo), lifted off the belt, and fixed in place; at the same time, the chassis side walls of the partially assembled unit are aligned. - Simultaneously, the heatsink tray and front wall tray are positioned. - A stack of 12 heatsink trays and a stack of 12 front wall bracket trays are manually placed onto the respective infeed belts outside the safety enclosure. - The two safety interlocks are opened and the loaded tray stacks move into the gripping position of each stacker. - The safety interlocks close again. - The corresponding grippers pick up the respective tray. - The tray is separated and transported upwards with the stacker z-axis to above the actual pick-up height. - To center and stabilize the tray, a centering support is pushed and positioned underneath each tray by the x-handling system. - With the stacker z-axis, each tray is set onto its corresponding centering support. - The trays are now ready for component removal. - Using the multi-gripper on the SCARA robot, the heatsink (KK) is gripped from the tray and placed in an intermediate alignment position (to compensate for pickup inaccuracies and ensure a repeatable gripping position for assembly). Dkjdpfx Afoibx S Njust - The heatsink is scanned, picked up again, and if the scanner result is OK, it is assembled onto the WT. - If not OK, the heatsink is placed in an NOK box. - The SCARA robot multi-gripper then picks up the front wall bracket (SW) from the tray and places it in the alignment position. - The front wall bracket is picked up again and assembled onto the WT. - Proceed to Assembly Area Front. Technical Data Model: SCARA (4-axis robot) Payload: nominal 5 kg, max. 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Orientation range: J4: +/- 360° Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Orientation repeatability: J4: +/- 0.005° Max. operating range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Max. operating speed: J1,J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Allowable moment of inertia: nom. 0.02 kg*m², max. 0.25 kg*m² User cabling electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-Axis: Ø outer: 25 mm Press-in force: 250 N Weight: 48 kg Controller: EPSON RC180 Mounting type: ceiling IP Protection class: IP20 Power and signal cables: 3m Financing through our bank is also possible. Complete offer at komplett-konzept.leasingo.de

Stanje: zelo dobro (rabljeno), Das Hamilton FLOW PCR Setup Instrument ist eine kompakte Laborroboter-Workstation zur vollautomatischen Vorbereitung von PCR- und qPCR-Ansätzen. Sie wurde entwickelt, um manuelle Pipettierfehler zu minimieren und den Probendurchsatz zu erhöhen. Das System kommt häufig in Verbindung mit Roche Life Science-Produkten wie dem MagNA Pure 96 System und dem LightCycler® 480 innerhalb der FLOW-Lösung zum Einsatz. Merkmale und Spezifikationen Das Hamilton FLOW PCR Setup Instrument (PSU) überzeugt durch Präzision und nahtlose Integration in automatisierte Labor-Workflows. Automatisierung: Vollautomatisches Pipettieren und Verteilen von PCR-Komponenten (Proben, Mastermixe, Primer) auf 96- oder 384-Well-PCR-Platten. Volumenbereich: Ausgelegt zur Aspiration und Dosierung von Volumina bis maximal 1 ml. Rückverfolgbarkeit: Integrierte Barcode-Erkennung für Zubehör und Verbrauchsmaterialien zur lückenlosen Probenverfolgung. Software-Integration: FLOW-Software ermöglicht den Import von Testaufträgen aus Laborinformationssystemen (LIMS) und Rückmeldung der Ergebnisse. Die Software unterstützt eine intuitive Konfiguration der PCR-Setups. Flexibilität: Betrieb als Stand-Alone-Gerät für das PCR-Setup oder im „FLOW Flex“-Modus für kombinierte Probenvorbereitung und PCR-Ansatz. Zubehör: Optional sind Kühlblöcke für PCR-Platten erhältlich, um temperaturempfindliche Reagenzien optimal zu schützen. Anwendungsbereiche Laut Hamilton und Roche ist das System für vielfältige genomische Anwendungen einsetzbar, darunter: - Genexpressionsanalyse - Genotypisierung - Sequenzierung - Erregernachweis (z. B. bei SARS-CoV-2-Tests) - Klinische Diagnostik Technische Daten Dkedpfx Afsyk Uxneust Spannungsversorgung: 115 V AC bis 230 V AC (+/-10 %) Frequenz: 50/60 Hz (+/- 5 %) Leistungsaufnahme: 600 VA Abmessungen: 112,4 × 90,3 × 100,6 cm (B × H × T), Tiefe ohne automatische Beladung 79,5 cm Gewicht: 180 kg Finanzierung über unsere Partnerbank möglich. komplett-konzept.leasingo.de Viele weitere neue und gebrauchte Artikel finden Sie in unserem Shop. Internationaler Versand auf Anfrage möglich!