Vei Električno Ogrevana Pečica Z Neprekinjenim Delovanjem nakup rabljenega (47.243)

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, moč: 43 kW (58,46 KM), lastna masa: 5.100 kg, največja dovoljena obremenitev: 2.500 kg, Leto izdelave: 2002, Oprema: dodatne luči, kabina, pogon na vsa štiri kolesa, spojka prikolice, standardna žlica, vilice za palete, zapora diferenciala, Kolesni nakladalnik VOLVO L30B-Z Letnik 2002 Po števcu: 11.461 ur Bsdpfey Tudksx Akredc Lastna teža: 5.100 kg Dvižna moč: 2.500 kg Deutz motor z 43 kW - vključno s sito žlico - vključno z običajno žlico - vključno s paletnimi vilicami - hidravlični hitri menjalnik - dodatni krog vse do nosilca vilic - upravljanje z joystickom - popolna kabina z ogrevanjem - svetlobni sistem - originalno stanje, takoj pripravljeno za uporabo! Prodajna cena: 17.500,-- neto Možna je tudi ugodna dostava!

Stanje: rabljeno, prevoženi kilometri: 808.951 km, moč: 355 kW (482,67 KM), prva registracija: 02/2020, vrsta goriva: dizel, lastna masa: 9.900 kg, največja dovoljena obremenitev: 16.025 kg, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, medosna razdalja: 4.800 mm, zavore: retarder, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: zrak, število sedežev: 2, število postelj: 2, Oprema: ABS, centralno zaklepanje, klimatska naprava, parkirni grelec, računalnik na krovu, registracija tovornjaka, spojler, tempomat, zapora diferenciala, zavorni sistem na stisnjen zrak, | DAF XF 480 FAR menljivo podvozje 6x2 | Klima, parkirno ogrevanje, ogrevani sedeži | Hladilnik, večfunkcijski volan | Diferencialna zapora, radio/CD | Vlečna kljuka | Podvozna dvižna ploščad | Dvigljiva os | Medosna razdalja: 4800 mm | Parkirna klima | Retarder | Pograd | Dobro stanje | Avstrijsko vozilo | Pridržujemo si pravico do napak, tipkarskih napak in predčasne prodaje. Bodpoy U Nb Tofx Akrsdc

Stanje: rabljeno, lastna masa: 2.840 kg, največja dovoljena obremenitev: 15.160 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2023, naslednji pregled (TÜV): 05/2026, vzmetenje: zrak, Oprema: ABS, registracija tovornjaka, | Krone AZ MAXI – šasija za zamenljive nadgradnje | BPW osi z disk zavorami | Nosilec rezervnega kolesa | Pnevmatske gume 445/45 R19.5 | Pridržujemo si pravico do napak, vnosnih napak in predhodne prodaje. Bdedpfx Ajy U Nbmskrjc

Stanje: rabljeno, lastna masa: 2.660 kg, največja dovoljena obremenitev: 15.340 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2023, naslednji pregled (TÜV): 05/2026, vzmetenje: zrak, velikost pnevmatike: 385/65/R22.5, Oprema: ABS, registracija tovornjaka, | Lafeta Krone AZ | BPW osi z disk zavorami | Nosilec rezervnega kolesa | Pnevmatioke 385/65/R22.5 | Napake, vnosne napake in predprodaja pridržane. Bsdpsy U Nbgsfx Akredc

Stanje: rabljeno, lastna masa: 8.804 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2011, vzmetenje: zrak, velikost pnevmatike: 385/65/R22.5, največja hitrost: 90 km/h, Oprema: ABS, | Schmitz hladilna polprikolica S3B | Hladilna enota Carrier Maxima 1300 | Škatla za palete | Schmitz osi z disk zavorami | Nosilec za rezervno kolo, orodjarna | Diesel ure: | Pridržujemo si pravico do napak, vnosnih napak in predhodne prodaje Bdsdpoy Uxvasfx Akrjc

Stanje: rabljeno, lastna masa: 3.440 kg, največja dovoljena obremenitev: 14.560 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 01/2015, naslednji pregled (TÜV): 01/2027, vzmetenje: zrak, velikost pnevmatike: 385/55R22,5, Oprema: ABS, Krone tandem podvozje ZZ | Nizko priklopnik | BPW osi z disk zavorami | Nosilec za rezervno kolo | Pnevmatike: 385/55R22,5 | Avstrijsko vozilo | Zadnja podpora | Pridržujemo si pravico do sprememb, napak in predhodne prodaje. Bdjdjy Uxupjpfx Akroc

Stanje: novo, Condition: New Bedpfx Aowiq E Nskrjdc Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €53,600 Leasing rate: €1,013.04 Bending length: 2,050 mm Sheet thickness (420 N/mm²): 3 mm Max. sheet thickness - stainless steel: 2 mm Max. sheet thickness - aluminium: 4 mm Drive: Motorized Length: 3,350 mm Width: 2,200 mm Height: 1,900 mm Weight: 3,800 kg Backgauge: 1,000 mm CNC CONTROL WITH TABULAR PROGRAMMING - 15.6" touchscreen on swivel arm - Tabular programming by input of respective axis values - Open or closed hemming function - Multi-radius functions for hemming or bending - Programming of material type, sheet thickness, springback, bending corrections, and creation of a database for different material types, sheet thicknesses, and sheet lengths - Piece counter - Authorization via password - 128GB HDD, virtually unlimited storage capacity - Remote maintenance via WiFi - Detailed alarm, tool, and parameter pages Motorized drive (servo motors) for the upper beam and bending beam (Z and Y axis) Motorized backgauge (X axis) with servo drive, 1,000 mm, rectangular configuration, with ball rollers in sheet platforms Upper beam opening: 220 mm (without tools) Manual adjustment of bending beam: 35 mm Upper beam with 45° geometry Continuous upper tool rail, 20° with R1 2 pcs. bending beam rails (7 or 10 mm, 15 or 25 mm) Front light curtain protection 3-position foot pedal OPTIONS: Segmented gooseneck rails Pneumatic tool clamping Segmented lower and bending tools Servo drive for bending beam Manual crowning system Second foot pedal Side stop Rear light curtain protection 2D or 3D graphical control PC software Special Omega geometry for lower and bending tools Tapered backgauge Backgauge extension Vacuum holder

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Bodpfx Akowiq A Isrodc Price: €57,100 Leasing rate: €1,079.19 Bending length: 3,200 mm Sheet thickness (420 N/mm²): 2 mm Max. sheet thickness – stainless steel: 1.2 mm Max. sheet thickness – aluminium: 3 mm Drive: Motorized Length: 4,450 mm Width: 2,200 mm Height: 1,900 mm Weight: 4,500 kg Backgauge: 1,000 mm CNC CONTROL WITH TABULAR PROGRAMMING: - 15.6" touchscreen on pivoting arm - Tabular programming by entering respective axis values - Open or closed hemming function - Multi-radius functions for hemming or bending - Programming of material quality, sheet thickness, springback, bending corrections, and creation of a database for different material types, sheet thicknesses, and sheet lengths - Piece counter - Password authorization - 128GB HDD, virtually unlimited storage capacity - Remote maintenance via WLAN - Detailed alarm, tool, and parameter pages Motorized drive (servo motors) for upper beam and bending blade (Z and Y axes) Motorized backgauge (X axis) with servo drive, 1,000 mm, rectangular configuration, with ball rollers in sheet supports Upper beam opening: 220 mm (without tools) Manual adjustment of bending blade: 35 mm Upper beam with 45° geometry Continuous upper tool rail 20° with R1 2 pcs. bending blade rails (7 or 10 mm, 15 or 25 mm) Front light curtain safety system Three-way foot pedal OPTIONS: Segmented gooseneck rails Pneumatic tool clamping Segmented lower and bending tools Servo drive for the bending blade Manual crowning system Second foot pedal Side gauge Rear light curtain safety system 2D or 3D graphical control PC software Special Omega geometry for lower and bending tools Conical backgauge Backgauge extension Vacuum holder

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, obratovalne ure: 5.416 h, nosilnost: 3.800 kg, dvižna višina: 15.740 mm, vrsta goriva: dizel, gradbena višina: 2.850 mm, širina nosilnega okvirja vilic: 1.500 mm, lastna masa: 12.650 kg, skupna dolžina: 4.700 mm, vrsta pogona: Diesel, gradbena širina: 2.290 mm, Vrtljivi teleskopski viličar Širina vilic: 125 mm Debelina vilic: 50 mm Tip droga: Brez Tehnično stanje: dobro Velikost prednjih pnevmatik: 405/70-20 Velikost zadnjih pnevmatik: 405/70-20 Polna kabina, varnostna luč, Bdodexir Enspfx Akroc

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 54 h, nosilnost: 227 kg, lastna masa: 7.400 kg, gradbena višina: 2.000 mm, vrsta goriva: električni, skupna dolžina: 6.830 mm, vrsta pogona: Elektro, doseg roke: 7.650 mm, gradbena širina: 1.790 mm, delovna višina: 15.940 mm, Articulating Boom Lift Speed Class: 4.8 Technical Condition: New Battery Condition: New Bdodpfx Aoxq I Egokroc Description: The Genie Z-45/25J DC is a high-performance electric articulated boom lift designed for working at height indoors and on emission-sensitive construction sites. With a working height of up to 15.94 m, long horizontal outreach, an articulating jib, and an emission-free electric drive, this machine is ideal for assembly, maintenance, and installation tasks—even in hard-to-reach areas or over obstacles. Compact, agile, and easy to operate. For more information and to submit a non-binding inquiry, please visit our website – Safe operation at any height. In addition to this machine, we offer work platforms and telehandlers for rent and sale. Our equipment is regularly serviced and inspected. Rental, sales, service & repair – everything from a single source. Lease purchase, financing, and the purchase of used machinery are also available. Our team will be happy to provide you with expert and personalized advice.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, vrsta goriva: dizel, lastna masa: 18.000 kg, dvižna višina: 25.000 mm, Leto izdelave: 2023, obratovalne ure: 1.336 h, skupna dolžina: 8.830 mm, gradbena višina: 3.150 mm, vrsta pogona: Diesel, nosilnost: 6.000 kg, gradbena širina: 2.530 mm, Rotating telehandler Speed class: 40 Technical condition: very good Description: The Magni RTH 6.25 is a versatile rotating telehandler designed for installation, lifting, and material handling on construction sites as well as for industrial applications. With a lifting height of up to 25 m, a load capacity of 6,000 kg, extensive reach, and a rotating upper carriage, the machine is perfectly suited for working at height and in confined spaces. Robust, powerful, and easy to operate. Excellent off-road capability for a wide range of applications. For more information and a non-binding inquiry, please visit our website – Safe operation at any height. In addition to this machine, we also offer other work platforms and telehandlers for both rental and purchase. Our equipment is regularly serviced and inspected. Rental, sales, service & repair from a single source. Leasing, financing, and the purchase of used machines are also possible. Our team will be happy to provide you with expert and personalized advice. Bjdjumvfyjpfx Akrjdc

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, nosilnost: 227 kg, lastna masa: 7.394 kg, gradbena višina: 2.130 mm, vrsta goriva: dizel, skupna dolžina: 7.580 mm, vrsta pogona: Diesel, doseg roke: 9.370 mm, gradbena širina: 2.290 mm, delovna višina: 17.590 mm, Articulated Boom Lift Speed class: 8 Technical condition: New Battery condition: New Description: The Genie Z-51/30J RT is a high-performance articulated boom lift designed for working at height outdoors and on rough terrain. With a working height of up to 17.59 m, extended horizontal outreach, and an articulated jib, this unit is ideal for assembly, maintenance, and construction tasks—even in hard-to-reach areas or over obstacles. Robust, all-terrain capable, and easy to operate. For more information and a non-binding quote, please visit our website – Safe operation at any height. In addition to this unit, we offer access platforms and telehandlers for rental and purchase. Our equipment is regularly serviced and inspected. Rental, sales, service & repairs – everything from a single source. Lease purchase, financing, and the purchase of used machines are also possible. Our team offers professional and personal advice. Bodpsym Hz Tsfx Akrodc

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, obratovalne ure: 1.274 h, nosilnost: 8.000 kg, dvižna višina: 26.600 mm, vrsta goriva: dizel, gradbena višina: 3.120 mm, lastna masa: 22.500 kg, skupna dolžina: 8.250 mm, vrsta pogona: Diesel, doseg roke: 23.100 mm, gradbena širina: 2.530 mm, Rotating Telehandler Speed class: 40 Technical condition: very good Description: The Magni RTH 8.27 is a high-performance rotating telehandler designed for assembly, lifting, and material handling tasks on construction sites and for industrial use. With a lifting height of up to 26.6 m, a load capacity of 8,000 kg, an infinitely rotating upper carriage, and all-wheel drive, this machine is ideal for handling heavy loads, working at height, and operating on challenging terrain. High reach and outstanding off-road capability. Robust, powerful, and easy to operate. For more information and a non-binding inquiry, please visit our website – safe operation at any height. In addition to this model, we offer other work platforms and telehandlers for rent and sale. Our equipment is regularly serviced and inspected. Rental, sales, service, and repairs – all from one source. We also offer leasing, financing, and the purchase of used machines. Our team will be happy to provide you with expert and personal advice. Bedjvgi A Nepfx Akrjdc

Stanje: rabljeno, največja dovoljena obremenitev: 15.320 kg, skupna masa: 18.000 kg, prva registracija: 04/2018, vzmetenje: zrak, medosna razdalja: 1 mm, barva: siv, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Ta ponudba ni zavezujoča. Pridržujemo si pravico do napak in vmesne prodaje. V primeru navedbe tuje valute velja aktualni dnevni tečaj. Veljavna je valuta lokacije vozila. Protiblokirni sistem (ABS), pnevmatsko vzdolžno nastavljiva vlečna gred. Bodpeyig Ipofx Akrsdc

Stanje: rabljeno, prevoženi kilometri: 372.928 km, moč: 330 kW (448,67 KM), prva registracija: 06/2022, vrsta goriva: dizel, največja dovoljena obremenitev: 15.875 kg, skupna masa: 26.000 kg, konfiguracija osi: 6x2, medosna razdalja: 4.900 mm, barva: drugo, voznikova kabina: drugo, vrsta prenosa: polavtomatski, emisijski razred: Euro 6, vzmetenje: zrak, dolžina tovornega prostora: 7.820 mm, Leto izdelave: 2022, Oprema: klimatska naprava, navigacijski sistem, parkirni grelec, računalnik na krovu, tempomat, This offer is non-binding. Errors and prior sale excepted. If a foreign currency is stated, this is based on the current daily exchange rate. The currency applicable is that of the vehicle’s location. Engine: OM471, inline 6-cylinder, 12.8 l, 330 kW (449 hp), 2200 Nm, High Performance Engine Brake, Predictive Powertrain Control Front axle: air suspension Trailing axle: 7.5 t, unloadable, liftable, air suspension Rear axle: tire pressure monitoring Fuel tank: 630 l, aluminium Cab: L-cab, cab width 2.50 m, StreamSpace, adjustable air deflector, MirrorCam, central locking system, comfort lock system Driver’s cab: roll control assist, comfort upper bed, wide, levelable, refrigerator in drawer under bed, electric stationary air-conditioning, automatic climate control, auxiliary hot water heater, comfort air-suspended driver's seat, rain sensor, automatic high/low beam and cornering light, headlamp cleaning system Safety: Lane Keeping Assist, Adaptive Cruise Control (distance assist), Attention Assist, Traffic Sign Assist, airbag (driver), cruise control, navigation system Bdjdpfx Akjyiv Tdersc Chassis: - Frame height: 1,120 mm - Coupling height: 1,300 mm - Height-adjustable twistlocks front & rear, adjusting range: 120 mm - Coupling height: 1,400 mm “MAX” (twistlocks on top) - Trailer coupling manufacturer: Ringfeder, type: C50-X Tachograph: DTCO 4.0

Stanje: rabljeno, prevoženi kilometri: 160 km, moč: 315 kW (428,28 KM), prva registracija: 07/2025, vrsta goriva: dizel, največja dovoljena obremenitev: 25.999 kg, skupna masa: 26.000 kg, konfiguracija osi: 6x2, medosna razdalja: 4.300 mm, barva: vijolična, voznikova kabina: drugo, vrsta prenosa: polavtomatski, emisijski razred: Euro 6, vzmetenje: zrak, Leto izdelave: 2022, Oprema: klimatska naprava, navigacijski sistem, parkirni grelec, računalnik na krovu, spojka prikolice, tempomat, This offer is non-binding. Subject to errors and prior sale. If a foreign currency is specified, this is calculated at the current daily exchange rate. The valid currency is that of the vehicle location. Waste heat recovery, OM470 engine, R6, 10.7 l, 315 kW (428 HP), 2100 Nm, Predictive Powertrain Control, front axle 8.0 t, trailing axle, 7.5 t, steered, relievable, liftable, parking brake, electronic, wheelbase 4300 mm, ADR type class FL, including EX/II, EX/III and AT, tank 290 l aluminum, AdBlue tank 60 l, trailer hitch, L-cab, L-cab, cab width 2.30 m, automatic climate control, hot water auxiliary heater, circuit breakers, hill-start assist, reversing warning system, illuminated Mercedes star, rain sensor, alarm system with interior monitoring, bi-xenon headlights, fog lights, LED tail lights, headlight cleaning system, lane departure warning system, distance assistant, attention assistant, traffic sign assistant, cruise control, navigation system, ADR type class FL, incl. EX/II, EX/III and AT. Bdjdpfx Aksyzu Hnerec

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, SMARTLINE 2040 Letnik izdelave 2026 – na voljo od maja 2026 Demonstracijski stroj – kot nov Premiki osi: X-os: 4.000 mm Y-os: 2.000 mm Z-os: 150 mm Oprema: - 1x 5-osna rezalna glava z avtomatsko kompenzacijo kota - Merilnik višine z nadzorom proti trkom - Programska oprema IGEMS - Rezervoar za abraziv in avtomatsko doziranje abraziva Bsdpey H Hbnsfx Akrjdc Visokotlačna črpalka Jetpower EVO Skupna poraba energije: 29 kW Električni priklop: 400 V +/- 5% / 50 Hz Maks. tlak vode: 4.100 bar Pretok vode: max. 2,8 l/min Vključno z montažo, usposabljanjem in garancijo

Stanje: rabljeno, Leto izdelave: 2000, Camam MO/..A/30X Nihajna dvojna nagibna dletna naprava Bjdsy U Eitepfx Akrsdc 6 dvojnih vodoravnih vreten dvojna delovna miza 3 različne velikosti nihanja (ali vrtanja)

Stanje: rabljeno, Leto izdelave: 2009, x-travel: 4000, y-travel: 2000, z-travel: 600 Dimensions (LxWxH): 6,400 x 3,200 x 3,100 mm Weight approx.: 10,500 kg Waterjet Cutting System Stein-Moser GmbH CNC 5-axis 4020 x 2020 x 600 mm Technical Data: - Working area X, Y 2D: 4,020 x 2,020 mm - Support surface X, Y: 4,400 x 2,400 mm - Z-axis: 600 mm - Swivel range A, B: +/- 46° - Rotary axis C, 360° rotation: +/- 3,600° - Positioning speed: 10 m/min - Repeat accuracy: +/- 0.1 mm - Pneumatic connection: min. 6.5 bar - Water connection: 2 – 5 bar - Machine dimensions LxWxH: 6,400 x 3,200 x 3,100 mm - Weight (with water): approx. 10,500 kg - Operating temperature: +10°C to +40°C - Max. operating pressure, high-pressure waterjet component: 4,000 bar Bdedpfjwiatisx Akrsc TOOLS / SPARE PARTS WORTH approx. €25,000 INCLUDED. New price approx. EUR 300,000 for the waterjet cutting system. Includes 3 tons of cutting sand. Serial: WS2040HB/090601 Type: WS 2040 HB Tank 4.2 PC cabinet (Rittal) on castors with air conditioning unit, contains: servo controller, TYM NUM AXIUM POWER, NUM MDLU 3 drive system, control PC, monitor, splash-proof keyboard and mouse, handheld control device for manual machine operation. - Connection values: 400 V AC, 16 A - Control voltage: 24 V DC NUM AXIUM POWER servo controller: - Central unit for CNC, PLC, and communication functions - Decentralized I/O modules with 32/32 digital inputs/outputs via fiber optics MDLU 3 drive system: - Fully digital, compact, integrated power supply - Integrated position, speed, and current control - Brushless digital servomotors - High-resolution measurement system via integrated SinCos encoder - Motor rated power: 2 kW CAD/CAM software Complete package for creating or importing drawings, setting process-specific parameters for the waterjet, and controlling the machine. - Direct machine control - 32-bit Windows software - Automatic approach strategies - Automatic correction sequence - Cutting direction freely selectable for each contour - Jet correction - Material database - Visual cut monitoring - HPGL and DXF import - Automatic pump pressure setting

Stanje: novo, Cutting capacity at 90°: round 220 mm Cutting capacity at 90°: square 210x210 mm Cutting capacity at 90°: flat 230x185 mm Cutting capacity at 45° left: round 150 mm Cutting capacity at 45°: square 150x150 mm Cutting capacity at 45°: flat 150x210 mm Cutting capacity at 60° left: round 90 mm Cutting capacity at 60° left: square 90x90 mm Bedjyv Ncgepfx Akredc Cutting capacity at 60° left: flat 90x100 mm Saw blade dimensions 2450x27x0.9 mm Cutting speed 35/70 m/min Working height 915 mm Vice opening 265 mm Total power requirement 1.2 kW Machine weight approx. 240 kg Space requirement approx. 1550x870x1740 mm The Zimmer Z241/R is a self-lowering saw for mitre cuts from 0° to 60° to the left. After the cut, the machine stops automatically thanks to a safety limit switch. The descent can be infinitely adjusted via a hydraulic system. Manual lifting of the saw arm after the cut can be performed at any position, and the saw arm remains locked in the desired position. Standard equipment: - with ICS descent control - Saw arm swivels up to 60° to the right - Quick-release vice - Carbide blade guides - Hydraulic saw blade tension, tension pressure indicator, blade breakage shutdown - Incl. coolant system - Incl. machine base cabinet - Hydraulic cylinder - Emulsion pump - Eccentric clamp - Saw blade - 400 V plug 16 A

Stanje: rabljeno, Leto izdelave: 2010, Condition: Used Year of manufacture: 2010 Stock number: 080065 Delivery time: Immediate, subject to prior sale Country of origin: Germany Price: €29,800 In stock: 1 unit Bending length: 2040 mm Sheet thickness (420 N/mm²): 3 mm Max. sheet thickness - stainless steel: 2 mm Max. sheet thickness - aluminium: 4.5 mm Drive: Motorized Bending beam motor: 1.5 kW Clamping beam motor: 1.1 kW Length: 3060 mm Width: 1650 mm Height: 1500 mm Weight: 2730 kg Backgauge: 750 mm Opening width: 140 mm Bending speed: 50 °/sec CNC control: ECT (Schneider Magelis) - Input of bending angle, backgauge depth, lift height, folding, blank size - Up to 36 bending angles per program storable - Up to 510 programs storable - Convenient 7.5" color touch TFT monitor - Power mode for gentle operation - Soft start of bending beam and backgauge - Visual user guidance in case of errors (diagnostic center) - Selection of various languages such as German, English, etc. CNC backgauge - Stop range: 6 - 750 mm - Belt-driven - 6 stop fingers - Support consoles with brushes Segmented gooseneck rail, 75 mm height Bedpewiri Ajfx Akrodc Extension rail: 10 mm Sharp rail R1 Sharp rail R2 Mechanical drive via gear brake motor Clamping beam drive via double eccentric Foot pedal Operating manual in German with CE Declaration of Conformity USED MACHINERY PURCHASE IS A MATTER OF TRUST – OUR TRANSPARENCY PROMISE We offer you maximum security and full transparency. • HONEST INSIGHTS Detailed photos & functional videos of the actual condition • LIVE CHECK ON SITE Live testing at our facility • DIGITAL DEMONSTRATION Individual live demonstration via video call • RISK-FREE PURCHASE 14-day return policy Details:

Stanje: novo, moč: 118 kW (160,44 KM), vrsta goriva: dizel, lastna masa: 2.586 kg, največja dovoljena obremenitev: 839 kg, skupna masa: 3.500 kg, velikost pnevmatike: 235/65 R16C, konfiguracija osi: 2 osi, medosna razdalja: 4.490 mm, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo, število sedežev: 3, skupna dolžina: 2.040 mm, skupna širina: 2.590 mm, skupna višina: 7.390 mm, dolžina tovornega prostora: 4.600 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 1.900 mm, Oprema: ABS, airbag, centralno zaklepanje, drsna vrata, klimatska naprava, računalnik na krovu, registracija tovornjaka, tempomat, | MAN TGE 3.160 L5H3 | Samodejni menjalnik | Klima, tempomat, asistent za ohranjanje voznega pasu, prepoznavanje prometnih znakov | 3-sedežna klop | Kamera za vzvratno vožnjo, parkirni senzorji spredaj in zadaj | Obloga tovornega prostora, pritrdilne zanke | Apple Car, Android Auto | Talna in bočna obloga | Dimenzije tovornega prostora: širina: 1,80 m, dolžina: 460 cm, višina: 195 cm | Pridržujemo si pravico do napak, tiskarskih napak in predhodne prodaje! Bjdpfx Ajy Tzhcskrjdc

Stanje: rabljeno, Sander for electronic components, brand Promac, complete with soundproof cabin, used. This machine is ideal for coarse sanding (grit size 6 to 50, for planing) of elements on 4 sides (see technical specifications in the photos). Bdedpfx Aksy Ud Rveroc

Stanje: rabljeno, Leto izdelave: 2009, Premer odsesavanja: 250 mm Nazivni volumenski pretok: 3534 m³/h Filtrirna površina: 22,6 m² Motor: 5,5 kW Briketiranje: zmogljivost ca.: 30 kg/h Bdsdpsyym A Sofx Akrec Premer briketa: 65 mm Motor: 3,0 kW Lokacija skladišča: Nattheim

Stanje: rabljeno, Leto izdelave: 2011, AXES Working area X-Y-Z axes * mm: 3050-1300-180 Workpiece length in pendulum operation mm: 1390 Stroke X-Y-Z axes mm: 3460-1735-250 Max. traverse speed X-Y axes m/min: 60 WORK TABLE Number of workpiece supports and vacuum suction pads: 6 / 2 standard type Standard end stops / position: 1 / rear Vacuum pump m³/h: 90/108 DRILLING UNIT Vertical spindles std./number/speed rpm: 12 (8X-5Y) / 4000 Horizontal spindles std./number/speed rpm: 6 (4X-2Y) / 4000 Integrated grooving / saw unit in X Ømm/rpm: 120 / 6000 Motor power kW (hp): 2.2 (3) ELECTROSPINDLE Motor power std. / opt. (S6) kW (hp): 7.5 (10) / 11 (15) Max. speed rpm: 24,000 Tool changer, traveling with the support in X: 4 positions, pneumatic INSTALLATION Installed power KVA: 23–28.5 Compressed air requirement Nl/min: 450 Extraction air requirement m³/h: 1900+1900 (3400) Required extraction air speed m/sec: 30 Extraction port diameter mm: 150+150 (200) Machine weight kg: 3000 * X Distance between stops – Y cutter center as reference; Z workpiece passage GENERAL FEATURES CNC-controlled drilling and milling center in frame design with work table equipped with adjustable workpiece supports and vacuum suction pads, suitable for: - Vertical drilling on the panel surface - Horizontal drilling on all four panel sides - Groove milling with disc cutter in the X direction - General milling operations Self-supporting structure and work table: Steel welded frame construction with the control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or optionally different support carriers. Box-type construction made from cold-rolled steel with internal reinforcement ribs, protective covers with component group consisting of a drilling head with vertical and horizontal spindles, integrated grooving and saw unit, and an SCM electrospindle with quick-change tool system type HSK 63 F. Bdodpfx Asyymz Uokrjc Travel paths of the portal and support carrier: Movement in the X, Y, and Z axes takes place on linear prismatic recirculating ball guides with preloaded bearings. Movement transmission of the X-axis (moving stand) is via a preloaded, backlash-free rack-and-pinion drive with helical gears. Movement of the support carrier in Y and Z directions is via preloaded ball screws. Positioning of the working units and machine functions is managed by "brushless" AC servomotors and digital drives. CNC CONTROL UNIT The control unit consists of a numerical control for milling and drilling machines and a connected PC with a graphical user interface "XILOG PLUS". - PC-Office operating system Windows XP - Color LCD screen 17" - QWERTY keyboard - Swivelling control panel - Machine interface software Xilog Plus Xilog Plus features: Programming - Parametric, graphical and ISO programming - Import of DXF and ASCII files - Straight line or circular interpolation in three axes, linear in space, spiral on the chosen plane - Assisted programming with graphical and syntax help for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Possibility to shift panel zero point for drilling on inclined or curved panel edges - Full compatibility with CAD/CAM Routocam (SCM) – AlphaCam Integrated additional features - Calculator for direct data transfer - S