Tampo Fle Colorsafe 80 nakup rabljenega (18.273)

Stanje: dober (rabljeno), Ventilator za odsesavanje prahu, odsesavanje izpušnih plinov, odsesavanje varilskega dima, odsesovanje, ventilator, odsesovalni ventilator, radialni ventilator, prezračevalni ventilator, radialni pihalnik, pihalnik, ventilator Lrodpfx Aey Tt Iheh Usl -Ventilator: pihalnik radialni ventilator -Tip: 2-stopenjski -Motor: ASEA 0,4/0,1 kW 1390/690 vrt/min -Ventilatorsko kolo: 2x Ø 200 x 80 mm -Vhodni priključek: Ø 160 mm -Izhodni priključek: 190 x 180 mm -Dimenzije: 815/590/H400 mm -Teža: 33 kg

Stanje: rabljeno, 2-speed electric motor with gearbox DEMAG type FG 08B-B3-23-H1-F1 Output speed fast: 915 rpm Output speed slow: 174 rpm 1 unit three-phase linear-rotor motor DEMAG Type: KBA 125 B Motor no. 3926599 Speed: 915 rpm Motor power: 4.7 kW Mains connection: 400 Volt, 50 Hz - Clutch disconnects via armature thrust movement in direct drive 1 unit three-phase linear-rotor motor DEMAG Type: KBA 80 A Motor no. 3926599 Lodpfx Asy N D E Aeh Usrl Speed: 1360 rpm Motor power: 0.83 kW Mains connection: 400 Volt, 50 Hz - Brake disconnects via armature thrust movement when driving - When stationary, the brake operates via the reduction gearbox on the motor - Output speed via the gearbox: 174 rpm Reduction gearbox DEMAG type FG 08B-B3-23-H1-F1 Gearbox no. 13926599 Input speed: 1360 rpm Output speed: 174 rpm Gear ratio: i = 7.8 Output shaft via motor rotor: Ø 32 mm Shaft stub length: 80 mm Pilot diameter on motor: Ø 125 mm Bolt circle diameter on motor: Ø 150 mm / 4xM12 internal thread Dimensions LxWxH: 1100 x 430 x 300 mm Weight: approx. 160 kg Good condition

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, obratovalne ure: 2.080 h, nosilnost: 2.000 kg, dvižna višina: 4.700 mm, prosto dvigovanje: 1.350 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 2.150 mm, dolžina vilic: 1.200 mm, lastna masa: 3.600 kg, skupna dolžina: 2.200 mm, vrsta pogona: Elektro, gradbena širina: 1.200 mm, Električni 3-kolesni viličar Težišče tovora: 500 Tip droga: Triplex Tehnično stanje: dobro Sprednje pnevmatike tip: superelastične Stanje sprednjih pnevmatik: 100% Zadnje pnevmatike tip: superelastične Stanje zadnjih pnevmatik: 100% Baterija volt: 48V Baterija Ah: 750Ah Proizvajalec baterije: Kapatest 80% Leto izdelave baterije: 2021 Opis: Nastavljive vilice, razpon odprtja 330-1.000 mm Lrodpoy Scmqofx Ah Uel Bočni pomik, nastavljive vilice, 3. ventil, 4. ventil, delovna luč zadaj, delovna luč spredaj, strešna zaščita, vetrobransko steklo, ogrevanje, popolna kabina, impulzno upravljanje, popoln prosti dvig, CE certifikat,

Stanje: rabljeno, Leto izdelave: 2018, obratovalne ure: 25.500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 12630000523, potovalna razdalja osi X: 800 mm, pomik osi Y: 900 mm, pomik po osi Z: 1.050 mm, proizvajalec krmilnikov: Heidenhain, model krmilnika: Heidenhain TNC460, skupna masa: 14.100 kg, Oprema: transportni trak za ostružke, Type: DMC 80 H linear Serial number: 12630000523 Year of manufacture: 2018 Lrodpfsy R Ra Nex Ah Ujl Maximum spindle speed: 12,000 rpm HSK-A100, torque: 430 Nm NC rotary tilting table for 5-axis machining B-axis: 360° A-axis: 25° / -200° 2-pallet changer Tool magazine with 183 slots (3 wheels) Operator panel for loading station Production package Heidenhain TS649 touch probe Tool breakage control 3D quickSet MPC machine protection control Coolant system with 980 l / 80 bar through-spindle coolant 10 additional T-slot pallets 630x630 mm Machine weight: 14,100 kg Tool holders and accessories as per agreement Available at short notice, disassembly and loading by arrangement If you have any questions or need further information, please feel free to send us a message or call us.

Stanje: dober (rabljeno), CNC krmiljenje, napajalnik, napajanje, stikalni napajalnik, upravljalna enota, krmilnik, Pro modul Lrjdpfxoy Tlduo Ah Usl -Proizvajalec: AEG, upravljalna enota -Tip: LOGISTAT CP 80-A04.1 -Dimenzije: 485/130/H170 mm -Teža: 5,3 kg

Stanje: dober (rabljeno), Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade Lredpfjw Au Egox Ah Ujl - Saw blade: Ø 630 x 6.4 mm - Bore: Ø 80 mm - Bolt circle: Ø 120 x 22 mm - Number of teeth: see photo - Quantity: 2 saw blades available - Price: per piece - Weight: 10.6 kg

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 670 mm, stružna dolžina: 3.000 mm, premer struženja: 800 mm, AVAILABLE FROM STOCK. Technical data of the CNC lathe with slant bed Model: TOK-80 CNC x 3m or 4m, offered after complete overhaul: MANUFACTURER: FUM POREBA - Overhaul year (completed by 'ZAK'): 2026 - Swing over bed: 800 mm - Turning diameter: 670 mm - Turning length: 3000 mm (immediately available) or 4000 mm (undergoing overhaul) Lrjdegpg I Rjpfx Ah Ujl - Spindle bore diameter: 95 mm - Main motor power: 55 kW - CNC system: Siemens - Sinumerik 840 D sl (new) - Tool system: Automatic 12-position turret - Workpiece weight between centers: 6000 kg - Workpiece weight in chuck: 800 kg - Number of spindle speed ranges: 2 - Spindle speed range: 4–800 rpm - Tailstock quill diameter: 180 mm - Tailstock quill travel: 150 mm - Rapid traverse Z and X axis: 5000 mm/min - Cross travel: 410 mm - Longitudinal travel: 3000 mm or 4000 mm - Machine dimensions for 3m version: H - 2900 mm, W - 2705 mm, L - 8135 mm - Machine weight: 24,000 kg (for 3 m turning length)

Stanje: dober (rabljeno), Leto izdelave: 2008, For sale is 1 unit of Scherer VDZ 80 DS with the following technical specifications: Swing diameter: 120 mm Z-axis (vertical): 265 mm X-axis (horizontal): 280 mm Front bearing diameter: 85 mm Rear bearing diameter: 75 mm 2 x A4 spindle Spindle drive rated power: 16.8 kW Rated torque: 100 Nm Speed: 1,000 – 7,000 rpm Traverse speed Z-axis: max. 30 m/min Lrjdpfx Ahoy H Iglo Usl Traverse speed X-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9,000 kg Complete documentation available. Please note: The system may require some reprogramming, as it was previously part of a complete line. However, a standalone program is available. Transportation and loading can be organised throughout Europe at an additional cost upon request. Prices are subject to VAT. Inspection possible by appointment. Please contact us – our team will be pleased to assist you. Machine purchase / sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or do you want to sell yours? For more information or to contact us, please use the contact form.

Stanje: dober (rabljeno), Leto izdelave: 2004, For sale are 2 units of Scherer VDZ 80 DS with the following technical specifications: Swing diameter: 120 mm Ledpfx Ajy H Ifush Uorl Z-axis (vertical): 265 mm X-axis (horizontal): 280 mm Front bearing diameter: 85 mm Rear bearing diameter: 75 mm 2 x A4 spindle Spindle unit drive rated power: 16.8 kW Rated torque: 100 Nm Speed: 1000 - 7000 rpm Traverse speed Z-axis: max. 30 m/min Traverse speed X-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9000 kg Complete documentation available. Note! The system will likely need to be reprogrammed to some extent, as it was previously part of a complete production line. However, a standalone operating program is included. Transport and loading can be arranged throughout Europe for an additional charge upon request. Prices plus VAT. Viewing by appointment possible. Contact us – our team looks forward to assisting you. Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Are you looking for a high-quality but affordable machine for your production? Or are you interested in selling one? For more information or to get in touch, please use the contact form.

Stanje: rabljeno, For Sale: KWB Multifire 20–80 kW Biomass Boiler – Flexible Heating with Wood Chips and Pellets The KWB Multifire 20–80 kW is a fully automatic biomass boiler, ideal for multi-family homes, commercial facilities, or agricultural operations. It can be operated with either wood chips or pellets, offering maximum fuel flexibility, reliable performance, and high efficiency. — Key Features: • Fuel: Wood chips / Pellets • Power Output: 20–80 kW • Fully automatic combustion, feeding, and cleaning • Robust construction for continuous operation • KWB – Austrian innovation in biomass heating Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) — Top Heating Systems – ProfiKazán Flexible biomass heating systems for residential and commercial buildings. TOP HEATING SYSTEMS – Used Heating Systems, Boilers, Heat Pumps & Accessories Direct from Stock We are a family-run business with around 20 years of experience in heating technology and operate a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a constantly available stock of about 50–60 units. Location: Our warehouse is located in Mosonmagyaróvár, Hungary – about 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major town on the Hungarian side after crossing the Austrian border. Our Range Includes, Among Others: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Screw conveyors • Fuel extraction systems • Burners • Pumps • Comprehensive heating accessories Ledpfx Ajttqd Noh Usrl Accessories and Components: Additionally, we offer a large selection of accessories, including circulation pumps, plate heat exchangers, and many other components – from residential applications to industrial scale. Brands in Our Portfolio: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many others. Current Offers: Most of our current listings can be found on our website: topheatingsystems.com. We also have further units available that are not yet listed. Viewing: A viewing at our warehouse is possible by prior appointment. If you are interested, feel free to contact us – we will help you find the right solution.

Stanje: pripravljen za uporabo (rabljen), Upogibni stroj (preša), ESPE CTO 80, rabljeni stroj Proizvajalec: ESPE Model: CTO 80 Lsdpfx Ahswfrkfe Uerl Pritisk: 80 ton Dolžina upogibanja: 2500 x 3 mm Dimenzije mize: 2500 x 160 mm Glavna moč motorja: 10 kW Teža: 6100 kg

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 74.800 h, potovalna razdalja osi X: 800 mm, pomik osi Y: 700 mm, pomik po osi Z: 600 mm, proizvajalec krmilnikov: Heidenhain, model krmilnika: iTNC 430, največja hitrost vretena: 18.000 obr/min, delovne ure vretena: 28.000 h, dovod hladilne tekočine: 40 letvica, Oprema: transportni trak za ostružke, IKZ (notranji dovod hladilne tekočine) NC rotacijska miza (C-os) NC nihajna glava Orodni držalo: HSK 63 Ledpfxsy Ep Rte Ah Uerl FD-funkcija Izmenjevalec palet Merilni sistemi: infrardeča merilna sonda za merjenje obdelovanca Dodatni magazin za 120 mest Vreteno je že bilo zamenjano

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2013, obratovalne ure: 4.737 h, nosilnost: 2.500 kg, dvižna višina: 4.630 mm, prosto dvigovanje: 1.500 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 2.250 mm, dolžina vilic: 1.200 mm, vrsta pogona: Elektro, Električni 4-kolesni viličar Težišče tovora: 500 Tip droga: Triplex Stanje: Pripravljen za uporabo in popolnoma delujoč Ledpfx Ahsy Eupds Usrl Tehnično stanje: zelo dobro Sprednje pnevmatike tip: Superelastik Zadnje pnevmatike tip: Superelastik Napetost baterije: 80V Kapaciteta baterije: 620Ah Letnik baterije: 2022 Stanje baterije: 80 - 100% Opis: Bočni pomik, Podaljški vilic 1400 mm, baterija letnik 2022 – z 80 % zmogljivosti!!! 3. ventil, delovna luč zadaj, delovna luč spredaj, polkabin, popoln prosti dvig,

Stanje: rabljeno, Leto izdelave: 2019, nosilnost: 8.000 kg, dvižna višina: 4.060 mm, - Operation: Seated operator - Load capacity: 8,000 kg - Load center distance: 900 mm - Axle load with load front/rear kg: 21,306 / 2,124 - Axle load without load front/rear kg: 7,097 / 8,333 - Track width front/rear mm: 1,561 / 1,432 - Tilt of mast/fork carriage forward/backward α/β: 5 / 8° - Mast height, lowered: 2,710 mm - Coupling height mm: 520 / 670 - Fork carriage ISO 2328, Class/Type A, B: ISO IV A - Aisle width with pallet 1,000 x 1,200 crosswise mm: 4,999 - Aisle width with pallet 800 x 1,200 lengthways mm: 5,199 - Turning radius mm: 3,049 - Minimum pivot distance mm: 877 - Travel speed with/without load km/h: 14 / 17 // 18 / 20.4 - Lifting speed 5 with/without load m/s: 0.28 / 0.37 // 0.36 / 0.48 - Lowering speed 5 with/without load m/s: 0.53 / 0.42 - Tractive force with/without load N: 27,997 / 28,295 - Max. tractive force with/without load N: 44,000 - Gradeability with/without load %: 15.5 / 22.5 Lrjdpfx Asy E Ui Dsh Ujl - Max. gradeability with/without load %: 16.0 / 23.0 - Acceleration time (15 m) 5 with/without load s: 7.9 / 6.8 // 6.9 / 6.1 - Service brake: Mechanical/Hydraulic - Battery according to DIN 43531/35/36 A, B, C, no: DIN 43536 A - Battery voltage V: 80 - Battery capacity K5 Ah: 1,120 (–1,240) // 1,085 - Energy consumption 45 VDI cycle/hour kWh/h: 17.7 - Throughput 5 t/h: 456 // 476 - Energy consumption at throughput kWh/h: 17.2 // 21.9 - Hydraulic pressure for attachments bar: 250 - Oil flow for attachments l/min: 60 - Sound pressure level LpAZ (operator’s position) 2 dB(A)

Stanje: rabljeno, Leto izdelave: 2023, nosilnost: 8.000 kg, dvižna višina: 6.570 mm, dolžina vilic: 1.800 mm, skupna dolžina: 6.150 mm, - Operation: Seated operator - Load capacity: 8,000 kg - Load center distance: 900 mm - Axle load with load front/rear kg: 21,306 / 2,124 - Axle load without load front/rear kg: 7,097 / 8,333 - Track width front/rear mm: 1,561 / 1,432 - Tilt of mast/fork carriage forward/backward α/β: 5 / 8° - Mast height, lowered: 2,710 mm - Coupling height mm: 520 / 670 - Fork carriage ISO 2328, Class/Type A, B: ISO IV A - Aisle width with pallet 1,000 x 1,200 crosswise mm: 4,999 - Aisle width with pallet 800 x 1,200 lengthways mm: 5,199 - Turning radius mm: 3,049 - Minimum pivot distance mm: 877 - Travel speed with/without load km/h: 14 / 17 // 18 / 20.4 - Lifting speed 5 with/without load m/s: 0.28 / 0.37 // 0.36 / 0.48 - Lowering speed 5 with/without load m/s: 0.53 / 0.42 - Tractive force with/without load N: 27,997 / 28,295 - Max. tractive force with/without load N: 44,000 - Gradeability with/without load %: 15.5 / 22.5 - Max. gradeability with/without load %: 16.0 / 23.0 Lodpfx Ahey E Uiqo Usrl - Acceleration time (15 m) 5 with/without load s: 7.9 / 6.8 // 6.9 / 6.1 - Service brake: Mechanical/Hydraulic - Battery according to DIN 43531/35/36 A, B, C, no: DIN 43536 A - Battery voltage V: 80 - Battery capacity K5 Ah: 1,120 (–1,240) // 1,085 - Energy consumption 45 VDI cycle/hour kWh/h: 17.7 - Throughput 5 t/h: 456 // 476 - Energy consumption at throughput kWh/h: 17.2 // 21.9 - Hydraulic pressure for attachments bar: 250 - Oil flow for attachments l/min: 60 - Sound pressure level LpAZ (operator’s position) 2 dB(A)

Stanje: rabljeno, Leto izdelave: 2022, nosilnost: 8.000 kg, dvižna višina: 4.500 mm, skupna dolžina: 5.600 mm, Električni viličar Still RX 60-80/900 Pogon: Električni Letnik proizvodnje: 2022 Dvižna višina (mm): 4.500 Lrsdey E Uh Hepfx Ah Usl Nosilnost (kg): 8.000

Stanje: rabljeno, Leto izdelave: 2022, nosilnost: 8.000 kg, dvižna višina: 6.620 mm, skupna dolžina: 5.910 mm, - Operation: Seated operator - Load capacity: 8,000 kg - Load center distance: 900 mm - Axle load with load front/rear kg: 21,306 / 2,124 - Axle load without load front/rear kg: 7,097 / 8,333 - Track width front/rear mm: 1,561 / 1,432 - Tilt of mast/fork carriage forward/backward α/β: 5 / 8° - Mast height, lowered: 2,710 mm - Coupling height mm: 520 / 670 - Fork carriage ISO 2328, Class/Type A, B: ISO IV A - Aisle width with pallet 1,000 x 1,200 crosswise mm: 4,999 - Aisle width with pallet 800 x 1,200 lengthways mm: 5,199 - Turning radius mm: 3,049 - Minimum pivot distance mm: 877 - Travel speed with/without load km/h: 14 / 17 // 18 / 20.4 - Lifting speed 5 with/without load m/s: 0.28 / 0.37 // 0.36 / 0.48 - Lowering speed 5 with/without load m/s: 0.53 / 0.42 - Tractive force with/without load N: 27,997 / 28,295 - Max. tractive force with/without load N: 44,000 - Gradeability with/without load %: 15.5 / 22.5 - Max. gradeability with/without load %: 16.0 / 23.0 Ljdpfx Aoy E Uffjh Ujrl - Acceleration time (15 m) 5 with/without load s: 7.9 / 6.8 // 6.9 / 6.1 - Service brake: Mechanical/Hydraulic - Battery according to DIN 43531/35/36 A, B, C, no: DIN 43536 A - Battery voltage V: 80 - Battery capacity K5 Ah: 1,120 (–1,240) // 1,085 - Energy consumption 45 VDI cycle/hour kWh/h: 17.7 - Throughput 5 t/h: 456 // 476 - Energy consumption at throughput kWh/h: 17.2 // 21.9 - Hydraulic pressure for attachments bar: 250 - Oil flow for attachments l/min: 60 - Sound pressure level LpAZ (operator’s position) 2 dB(A)

Stanje: rabljeno, Leto izdelave: 2022, nosilnost: 8.000 kg, dvižna višina: 3.120 mm, skupna dolžina: 5.450 mm, - Operation: Seated operator - Load capacity: 8,000 kg - Load center distance: 900 mm - Axle load with load front/rear kg: 21,306 / 2,124 - Axle load without load front/rear kg: 7,097 / 8,333 - Track width front/rear mm: 1,561 / 1,432 - Tilt of mast/fork carriage forward/backward α/β: 5 / 8° - Mast height, lowered: 2,710 mm - Coupling height mm: 520 / 670 - Fork carriage ISO 2328, Class/Type A, B: ISO IV A - Aisle width with pallet 1,000 x 1,200 crosswise mm: 4,999 - Aisle width with pallet 800 x 1,200 lengthways mm: 5,199 - Turning radius mm: 3,049 - Minimum pivot distance mm: 877 - Travel speed with/without load km/h: 14 / 17 // 18 / 20.4 - Lifting speed 5 with/without load m/s: 0.28 / 0.37 // 0.36 / 0.48 - Lowering speed 5 with/without load m/s: 0.53 / 0.42 - Tractive force with/without load N: 27,997 / 28,295 - Max. tractive force with/without load N: 44,000 - Gradeability with/without load %: 15.5 / 22.5 - Max. gradeability with/without load %: 16.0 / 23.0 - Acceleration time (15 m) 5 with/without load s: 7.9 / 6.8 // 6.9 / 6.1 - Service brake: Mechanical/Hydraulic - Battery according to DIN 43531/35/36 A, B, C, no: DIN 43536 A Lrjdpfjy E Ud Uox Ah Ujl - Battery voltage V: 80 - Battery capacity K5 Ah: 1,120 (–1,240) // 1,085 - Energy consumption 45 VDI cycle/hour kWh/h: 17.7 - Throughput 5 t/h: 456 // 476 - Energy consumption at throughput kWh/h: 17.2 // 21.9 - Hydraulic pressure for attachments bar: 250 - Oil flow for attachments l/min: 60 - Sound pressure level LpAZ (operator’s position) 2 dB(A)

Stanje: rabljeno, Leto izdelave: 2023, nosilnost: 8.000 kg, dvižna višina: 4.500 mm, dolžina vilic: 1.800 mm, skupna dolžina: 5.360 mm, - Operation: Seated operator - Load capacity: 8,000 kg - Load center distance: 900 mm - Axle load with load front/rear kg: 21,306 / 2,124 - Axle load without load front/rear kg: 7,097 / 8,333 Lrjdpfxey E Udze Ah Uol - Track width front/rear mm: 1,561 / 1,432 - Tilt of mast/fork carriage forward/backward α/β: 5 / 8° - Mast height, lowered: 2,710 mm - Coupling height mm: 520 / 670 - Fork carriage ISO 2328, Class/Type A, B: ISO IV A - Aisle width with pallet 1,000 x 1,200 crosswise mm: 4,999 - Aisle width with pallet 800 x 1,200 lengthways mm: 5,199 - Turning radius mm: 3,049 - Minimum pivot distance mm: 877 - Travel speed with/without load km/h: 14 / 17 // 18 / 20.4 - Lifting speed 5 with/without load m/s: 0.28 / 0.37 // 0.36 / 0.48 - Lowering speed 5 with/without load m/s: 0.53 / 0.42 - Tractive force with/without load N: 27,997 / 28,295 - Max. tractive force with/without load N: 44,000 - Gradeability with/without load %: 15.5 / 22.5 - Max. gradeability with/without load %: 16.0 / 23.0 - Acceleration time (15 m) 5 with/without load s: 7.9 / 6.8 // 6.9 / 6.1 - Service brake: Mechanical/Hydraulic - Battery according to DIN 43531/35/36 A, B, C, no: DIN 43536 A - Battery voltage V: 80 - Battery capacity K5 Ah: 1,120 (–1,240) // 1,085 - Energy consumption 45 VDI cycle/hour kWh/h: 17.7 - Throughput 5 t/h: 456 // 476 - Energy consumption at throughput kWh/h: 17.2 // 21.9 - Hydraulic pressure for attachments bar: 250 - Oil flow for attachments l/min: 60 - Sound pressure level LpAZ (operator’s position) 2 dB(A)

Stanje: rabljeno, Leto izdelave: 2016, nosilnost: 8.000 kg, dvižna višina: 3.130 mm, skupna dolžina: 4.940 mm, Electric forklift Lrodjxd E Acjpfx Ah Ujl Linde E 80-01/900 Drive: electric Year of manufacture: 2016 Lift height (mm): 3,130 Load capacity (kg): 8,000

Stanje: rabljeno, Leto izdelave: 2006, Technical details: Lsdpfx Ajpumdceh Usrl X travel: 800 mm Y travel: 800 mm Z travel: 800 mm Spindle speed: 12,000 rpm Tool holder: SK 50 Control system: SIEMENS 840D ShopMill Tool changer: 240 positions Pallet size: 630 x 630 mm Spindle: 52 kW / 430 Nm Total power requirement: 87 kVA Machine weight approx.: 15 t Horizontal machining center with pallet storage, NC rotary table, Double pallet changer, High-pressure coolant system 40 bar, Preparation for Renishaw MP 10 infrared probe (without probe), Mechanical tool breakage monitoring, Minimum quantity lubrication (MQL), Through-spindle air blast, Electronic oil mist extraction, Electronic handwheel, TRANSMIT function, Accuracy package, BA 4, Laminated safety glass pane right side door, Including FASTEMS FPC 1000 pallet system for a total of 14 pallets, including setup station, shelf handling device, master computer, and 10 pallets Approx. 98,500 operating hours, main switch ON Approx. 45,500 spindle hours

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, leto zadnje generalne obnove: 2026, volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced Lrsdpfx Ahoy S Ru Ae Usl - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, obratovalne ure: 11.250 h, nosilnost: 7.000 kg, dvižna višina: 8.000 mm, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 3.850 mm, dolžina vilic: 1.400 mm, vrsta pogona: Diesel, Stranski viličar Lsdpoy H Tbhefx Ah Usrl Tip droga: Triplex Stanje: Pripravljen za uporabo in popolnoma funkcionalen Tehnično stanje: dobro Nastavljive vilice, Ogrevanje, STVZO, popolna kabina,

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, obratovalne ure: 8.000 h, nosilnost: 7.000 kg, dvižna višina: 8.000 mm, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 3.850 mm, dolžina vilic: 1.400 mm, vrsta pogona: Diesel, Stranski viličar Tip drogovja: Triplex Stanje: Pripravljen za uporabo in popolnoma funkcionalen Tehnično stanje: dobro Nastavljive vilice, ogrevanje, homologacija za cestni promet, popolna kabina, Lrodpfxey H Tbbs Ah Uel

Stanje: zelo dobro (rabljeno), Leto izdelave: 1960, številka stroja/vozila: 3/60 388, Format (cm): 80 Equipment / further details: 1x spare blade Condition: Very good condition / New control unit Ljdpfx Aemb U Rcjh Usrl