Stroj Za Prezračevanje Komolcev nakup rabljenega (85.043)

Stanje: novo, Clean air extraction / dust extractor Cjdper A Eq Rsfx Ac Njrc Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA The fan is installed downstream of the filter Extraction motor energy efficiency class: IE3 Nominal airflow: 1,448 m³/h Nominal negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter of extraction inlet: 160 mm Filter surface area: 9.21 m² Residual dust content: < 0.1 mg/m³ Maximum sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg PM VERSION Automatic filter cleaning with pneumatic system, operating a wiper frame

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Edge thickness: 0.2 – 12 mm Workpiece dimensions: Minimum width: 70 mm Minimum/maximum height: 8 / 42 mm Minimum length: 160 mm (for strip edges) Minimum length: 60 mm (for coil material) Feed speed: 12 m/min Glue application roller Working height: 880 mm Compressed air: 6 bar, 1/4 inch Extraction port: 160 mm diameter Machine dimensions (L x W x H): 5600 x 950 x 1300 mm Weight: approx. 2200 kg Connected load: approx. 11.5 kW, 400 V, 50 Hz Equipment: - Double top pressure with electronic height adjustment Crjdpfx Ashy Tlroc Nec - Automatic magazine for coiled edges up to 800 mm diameter - Pneumatic guillotine shear for strip edges up to 3 mm - Automatic infeed fence Pre-milling unit with 2 high-frequency motors, 1.5 kW, 12,000 rpm Double end trim saw - 2 high-frequency motors, 0.2 kW, 12,000 rpm 2 automatic positions = 0 + 3 degrees Flush trimming unit with 2 high-frequency motors, 0.7 kW, 12,000 rpm Radius milling unit - with 2 high-frequency motors, 0.3 kW, 12,000 rpm Surface scraper Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-works – free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty. Buyers are free to inspect the equipment at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries including your address and telephone number!)

Stanje: novo, ALTENDORF Model F 2 Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special price and full manufacturer's warranty. The 3.3 m long F 2 is not only economical and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure perfectly prepared workpieces for edge banding. The equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, cross-cut saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Feed rate approx. 10 m/min Features: Edge banding machine F2 next With PLC control (including touchscreen) Hot-melt glue application onto the workpiece for edge material up to 3 mm Jointing cutter (including diamond-tip tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change capability and glue drainage device HF cross-cut saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic cutter adjustment and replaceable insert cutter (combi version) Robust chain feed Double roller top pressure with ball bearings Inspection window at the rear of the machine Extendable workpiece support Including special equipment: Codpfx Ajl D Rp Eec Nsrc F2/12 Surface scraper (incl. pneumatic lift-off) F2/30 Pneumatic 3-point adjustment (radius, bevel, flush trimming) F2/27 Nesting for milling stations

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Edge thickness: 0.2 - 12 mm Workpiece thickness: 8 - 52 mm Minimum workpiece width: 70 mm Minimum workpiece length: 150 mm Automatic edge magazine Jointing milling unit: 2 x 1.5 kW, controlled feed End trimming unit: 2 x 0.3 kW Flush milling unit: 2 x 0.7 kW, one-sided tracing Fine milling unit: 2 x 0.35 kW, tiltable at 15/30/45 degrees Fine milling unit: 2 x 0.3 kW, R=2, double-sided tracing Crodslc Ewispfx Ac Nsc Corner copying unit: 2 x 0.3 kW Scraper unit, automatically controlled Surface scraper unit with fine adjustment feature Buffing unit: 2 x 0.2 kW, oscillating 5-way spraying system (2 x separating agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed speed: 10 - 14 m/min Infinitely variable feed speed COMBI MELT gluing unit for EVA/PUR, hopper volume 1.5 l CE marking Total connected load: 12.6 kW Dimensions (L x W x H) approx.: 6120 x 840 x 1500 mm Weight approx.: 2,900 kg

Stanje: zelo dobro (rabljeno), Edge cutting device Working height: 800 mm Dimensions (L x W x H) approx.: 1,060 x 720 x 930 mm Cedpfx Acswiwnqe Njrc Compressed air connection: 6 bar Weight approx.: 120 kg Cutter included

Stanje: kot nova (razstavni stroj), pneumatic single-head boring machine with 21 spindles MAGGI Model: Boring System 21 Crjded Supgopfx Ac Noc STANDARD EQUIPMENT: - Aluminium fence with 2 stops (each 1,500 mm, right and left) - No. 5 quick-change chucks - No. 2 patented safety pneumatic hold-down cylinders - Connector for suction/extraction unit compliant with EU standards KEY FEATURES: - Worktable made of cast iron - Boring head made of aluminium - Patented spiral system for fine adjustment of drilling depth - Pneumatic lowering of the boring head, lockable in any position between 0° - 90° - Extendable cast iron side stops with millimetre adjustment, readable on a scale with magnifier - Drill height adjustment via digital counter with decimal display - Fixed stops, 37 mm, for cup hinges - Machine constructed according to CE standards TECHNICAL DATA: - Boring spindles (left red/right black): 21 pcs. (10/11) - Distance between boring spindles: 32 mm - Working width: 640 mm - Max. drilling depth: 65 mm - Number of pneumatic hold-down cylinders: 2 pcs. - Max. workpiece size: 900 x 3000 x 60 mm - Max. workpiece height: 65 mm - Number of motors: 1 pc. - Motor power: 1.5 kW, 400 V, 50 Hz - Motor speed: 2800 rpm - Working pressure: 6-8 bar - Standard air consumption per cycle: 10 l/cycle - Extraction port diameter: 80 mm - Worktable height: 860 mm Overall dimensions (approx.) L x W x H: 1030 x 1030 x 1285 mm Weight (approx.): 260 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Roller Coating Machine BÜRKLE easy coater RCL 12M and UV Curing System easy cure UV - TRUV with 2 Lamps and 2 x Roller Conveyors BÜRKLE easy coater RCL 1300: Cjdpfxet Dx U Ss Ac Norc For single-sided coating of flat surfaces from above Operator side: left Touch screen control TP 177 Micro Rubber-coated applicator roller Hard-chromed dosing roller, finely adjustable via worm gear Controlled belt transport with exposed counter roller for reliable workpiece transport Quick-change system with split bearing and disc coupling for easy replacement of the applicator roller Oscillating doctor blade, quick and easy to replace for cleaning Separate, infinitely variable FU direct drives for applicator and dosing rollers as well as for the transport system Reversible dosing roller Motors and limit switches in explosion-proof design on the machine Control cabinet and operator panel in non-explosion-proof design, located outside the hazardous area of the machine Mobile version Electric provision for integrating the roller coating machine into a coating line Technical Data: Working width: 1300 mm Workpiece height: 3 - 80 mm Min. workpiece length: 400 mm Rubber-coated applicator roller diameter: 240 mm Chromed dosing roller diameter: 172 mm Conveying speed: 2 - 15 m/min, variable Connected load: approx. 2.4 kW Dosing roller speed: 1.0 - 3.0 m/min Working height: 900 mm (+/- 20 mm) Safety devices compliant with CE standards Incl. control cabinet Weight: approx. 1650 kg UV System e.a.s.y. cure UV - TRUV with 2 Lamps: Single-sided curing of UV-curable coatings on flat workpieces from above Incl. control cabinet Max. working width: 1300 mm Max. workpiece height: 80 mm Number of lamps: 2 (replaced 10/2023) UV lamp power: 120 W/cm² each Speed: 2 - 15 m/min, variable Transport: conveyor belt Exhaust duct: 2 x 250 mm Connected load: 39 kW Weight: approx. 750 kg 2 x Roller Conveyor RB 1300: Working width: 1300 mm Length: 4000 mm Speed: 2 - 15 m/min, variable Connected load: 2 x 0.37 kW Total system length: 12,450 mm

Stanje: zelo dobro (rabljeno), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with separate motor approx. 0.2 kW Sanding belt dimensions: 3000 mm x 200 mm Front sanding table: 980 x 340 mm Rear sanding table: 750 x 300 mm Space requirement (L x W x H) approx.: 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table infinitely adjustable in angle Cedpfx Ajuxqzusc Nsrc Angle stop on the rear worktable Oscillation via geared motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic, adjustable belt tensioning Extraction with blower Possible attachment of feed device 2 side support tables for radius sanding Note on used machines: • Errors in technical details and prior sale excepted. • Quoted prices are ex works—free loading at location! • Machine has been cleaned and function tested. • All machines are sold as inspected, without any claim to warranty. Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Belt dimensions: 2600 x 150 mm Motor power (grinding belt): 2.2 kW Operating voltage: 3 x 400 V + PE / 50 Hz Grinding table height adjustable via handwheel Table size: 975 x 340 mm Height-adjustable grinding table for radii; size: 400 x 200 mm Cjdpfx Acett Da De Norc Sanding arm adjustable: 90° – 0° Extraction port: Ø 120 mm CE certified Required space (L x W): approx. 1600 x 725 mm Weight: approx. 320 kg Note on used machinery: • Technical specifications are subject to error and prior sale. • Listed prices are ex-site and ex-loading. • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)

Stanje: delavnici obnovljeno (rabljeno), Mortising machine, oscillating chisel mortiser MAKA Type DB 5 including numerous mortising tools – see photos Csdpfjv Hm Nmex Ac Norc Workpiece stop: 2 pcs Stop rail left/right: 2150 mm Workpiece blow-out: 2x Foot switch Pneumatic workpiece clamping, lateral: 1 pc Pneumatic workpiece clamping, from above: 2 pcs Extraction connection: D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Technical specifications are subject to errors and prior sale. • Stated prices are ex location, free loading! • The machines have been cleaned and function tested. • All machines are purchased as inspected, with no claim to warranty whatsoever. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid if made in writing. (Inquiries will only be answered with your address and phone number!)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, največja širina rezanja: 920 mm, dolžina rezanja (maks.): 920 mm, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, Opravljeno je bilo novo menjavanje olja za hidravliko in menjalnik. Nov barvni zaslon s programsko prilagoditvijo. Števec rezov pri približno 871.000. - ED programirano upravljanje - Svetlobna pregrada - Zračni miza Crsdozbiwyjpfx Ac Nsc - Preklopni zadnji pokrov mize - Navodila za uporabo (kopija) - Rezervni nož - Pribor za menjavo noža Stroj je takoj na voljo iz zaloge. Preizkus in ogled sta seveda mogoča po predhodnem dogovoru.

Stanje: rabljeno, X-achsweg 4500 mm Y-achsweg 1700 mm Codpfxjt Hr Iks Ac Nerc Z-achsweg 1000 mm ISO 50 Spindeldrehzahl 3000 U/min Maschinengewicht 28 t CNC NUM 750 Werkzeugwechsler mit 61 Plätzen Automatikkopf: Achse A 1°, Achse B 3°

Stanje: rabljeno, potovalna razdalja osi X: 7.000 mm, pomik osi Y: 4.000 mm, pomik po osi Z: 900 mm, največja hitrost vretena: 1.200 obr/min, hitrost pomika os X: 900 m/min,

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Torsion-free C-frame construction made from steel Standard heating system Disc system with tolerance compensation for different veneer thicknesses Regulation of heating output in stationary and mobile operation Thread breaking roller Throat depth: 920 mm Feed rate: approx. 20 m/min Veneer thickness: approx. 0.4 - 2.0 mm Crjdog Nn E Nepfx Ac Njc Operating voltage: 400 V, 50 Hz, 3-phase Total connected load: 0.97 kVA Includes gluing reel & operating manual Dimensions (L x W x H): approx. 1280 x 580 x 1470 mm Weight: 220 kg Note on Used Machinery: • Subject to technical changes and prior sale. • Stated prices are ex location - free loading! • Machines have been cleaned and functionally tested. • All machines are sold as inspected, without any guarantee or warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries containing your address & telephone number!)

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, skupna masa: 700 kg, leto zadnje generalne obnove: 2023, Glavar Fortuna KM 5 Glavar Fortuna model: KM 5 Cedpfx Acezbz E No Nsrc VATW 5 vrstna Območje teže pribl.: od 30 do 80 gramov Stroj za deljenje in oblikovanje testa s seperacijsko trakovo Priključek 400V, 16A-CEE vtikač Rabljeni stroj

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, leto zadnje generalne obnove: 2026, Certificirano po DGUV do: 07/2027, delovna širina: 300 mm, širina transportnega traku: 320 mm, vrsta vhodnega toka: trifazni, skupna širina: 580 mm, skupna dolžina: 590 mm, skupna višina: 1.220 mm, Stroj za zavijanje rogljičev Erka WMA 30 Širina navijalnega traku 320 mm Primeren za vse vrste štručk, kot sta Kornspitz in lužnate štručke, Premični stroj za zavijanje rogljičev Priklop 400V, vtikač 16A-CEE Rabljeni stroj Opcije: Csdpfxozbz D Se Ac Nerc Vzdrževalna pogodba Dostavna služba Usposabljanje in zagon

Stanje: zelo dobro (rabljeno), Brusilni stroj za nože GRIFO s priloženo mizo, mehanski, dolžina 1.500 mm Crsdpfx Acjykrzyj Noc

Stanje: rabljeno, IL 2 upravljanje za ILSA Multimatic Cedpoy Uv Uaofx Ac Nerc

Stanje: rabljeno, Električni pogon Proženje cikla z nožnim stikalom V dobavo je vključenih več orodij: 1 x zgornji/spodnji nož s polmerom 4 mm 1 x zgornji/spodnji nož s polmerom 6 mm 1 x zgornji/spodnji nož s polmerom 7 mm Cedsythzujpfx Ac Nsrc 1 x zgornji/spodnji nož s polmerom 8 mm 1 x zgornji/spodnji nož s polmerom 9 mm 1 x zgornji/spodnji nož s polmerom 15 mm (trenutno nameščen)

Stanje: rabljeno, Izsekovalni stroj za npr. pokrove s številnimi izsekovalnimi orodji Cedpfxexw N Nts Ac Nerc

Stanje: rabljeno, delovna širina: 500 mm, Električni stroj za lepljenje robov z integrirano enoto za utore. Vhodna širina cca 500 mm Vključeni so naslednji valji za nanašanje lepila (lepilni rezervoar je mogoče prilagoditi zahtevani širini valja): 1 x 13 mm širina 1 x 15 mm širina 1 x 17 mm širina Crodpfeytxw Hsx Ac Nec 1 x 19 mm širina 1 x 21 mm širina 1 x 23 mm širina 1 x 25 mm širina 1 x 27 mm širina 1 x 33 mm širina

Stanje: dober (rabljeno),

Stanje: dober (rabljeno), With extended roller table • Type – SILIKANT – 2500 • Serial number – 7609 1-12 Cedpouqlc Nefx Ac Nsrc • Year of manufacture – 2001 • Belt dimension – 100 x 2500 • Roller table (total length) 4.10 m × 0.55 m • Center section – 1.20 m • Sides 2 x 1.45 m • Height – 1.02 m • Price on request

Stanje: dober (rabljeno), • Type: 1300A • Serial number: 951313V • Open top • Dimensions: - Overall length: 4,900 mm - Depth: 1,100 mm Cjdpeq Ec D Tefx Ac Nsrc - Height: 2,300 mm - Washer length: 2,100 mm - Infeed: 1,400 mm - Outfeed: 1,400 mm • Washing height: 1,500 mm • 2 pairs of brushes • Electrical connection: 380V, 50Hz, 11kW • Price on request

Leto izdelave: 2022, stanje: novo, Spare parts for shot blasting plant, shot blasting machine, blast wheel, Rösler type: H42 Throwing blade H42 99501010 G 300033085 Throwing blade H32 99501035 300033354 Throwing blade H28 99501015 300129471 Impeller 99505016 300129472 Control sleeve 99505017 300129473 Rösler shot blasting plant New! Top quality! Hurricane H42 H32 H28 Throwing blade H42 Impeller H42 / H32 H28 Distributor H42 H32 H28 Spare parts for Rösler shot blasting plant, shot blasting plants, blast wheels, blast wheel H42 H32 H28 We also offer spare parts for Rösler, Schlick, Wheelabrator, Gietart etc. shot blasting machines! Cjdpfx Asctguiec Nsrc We can offer spare parts for Rösler shot blasting machines!