Spinner Tc 62 Ml nakup rabljenega (6.310)

Stanje: novo, Leto izdelave: 2024, nosilnost: 2.500 kg, dvižna višina: 5.850 mm, skupna dolžina: 5.130 mm, · Maximum lateral reach: 3.30 m Ledpfx Ajxd Huajhusrn · Reach at maximum lift height: 0.50 m · Breakout force with bucket: 4205 daN · Front overhang: 0.99 m · Dump angle: 117° · Tilt-back angle: 12° · Turning radius (over tyres): 3.31 m · Drive wheels (front / rear): 2 / 2 · Steering wheels (front / rear): 2 / 2 · Lifting time: 7.30 s · Lowering time: 4.95 s · Telescope extension: 5.20 s · Telescope retraction: 3.70 s · Tilt-in time: 3.20 s · Dump-out time: 3.20 s · Engine: Kubota, emission standard Stage V · Engine model: V3307-CR-T-E5B · Number of cylinders - cylinder capacity: 4 - 3331 cm³ · Rated engine power: 75 HP / 55.40 kW · Max. torque / engine speed: 265 Nm @ 1400 rpm · Tractive force: 3240 daN · Standard reversible fan · Engine cooling system: 2 water coolers + hydraulic oil cooler · Transmission type: hydrostatic · Number of gears (forward / reverse): 2 / 2 · Max. travel speed (may vary according to regulations): 25 km/h · Differential lock: locking differential on front axle · Parking brake: automatic negative parking brake · Service brake: oil-immersed multi-disc brakes on front axles · Pump type: gear pump · Hydraulic flow / pressure: 86 l/min – 235 bar · Fuel tank capacity: 63 l · Noise level (LpA) according to NF EN 12053: 76 dB · Environmental noise (LwA): 104 dB · Hand/arm vibration exposure: < 2.50 m/s² · Safety cab approval: ROPS - FOPS Level 1 cab · Controls: JSM

Stanje: novo, Leto izdelave: 2024, nosilnost: 2.500 kg, dvižna višina: 5.850 mm, skupna dolžina: 5.200 mm, · Maximum lateral reach: 3.30 m · Reach at maximum lift height: 0.50 m · Breakout force with bucket: 4205 daN · Front overhang: 0.99 m · Dump angle: 117° · Tilt-back angle: 12° · Turning radius (over tyres): 3.31 m · Drive wheels (front / rear): 2 / 2 · Steering wheels (front / rear): 2 / 2 · Lifting time: 7.30 s · Lowering time: 4.95 s · Telescope extension: 5.20 s · Telescope retraction: 3.70 s · Tilt-in time: 3.20 s · Dump-out time: 3.20 s · Engine: Kubota, emission standard Stage V · Engine model: V3307-CR-T-E5B · Number of cylinders - cylinder capacity: 4 - 3331 cm³ · Rated engine power: 75 HP / 55.40 kW · Max. torque / engine speed: 265 Nm @ 1400 rpm · Tractive force: 3240 daN · Standard reversible fan · Engine cooling system: 2 water coolers + hydraulic oil cooler · Transmission type: hydrostatic · Number of gears (forward / reverse): 2 / 2 · Max. travel speed (may vary according to regulations): 25 km/h · Differential lock: locking differential on front axle · Parking brake: automatic negative parking brake · Service brake: oil-immersed multi-disc brakes on front axles · Pump type: gear pump · Hydraulic flow / pressure: 86 l/min – 235 bar · Fuel tank capacity: 63 l · Noise level (LpA) according to NF EN 12053: 76 dB · Environmental noise (LwA): 104 dB Ledpfexd Htiox Ahuern · Hand/arm vibration exposure: < 2.50 m/s² · Safety cab approval: ROPS - FOPS Level 1 cab · Controls: JSM

Stanje: novo, Leto izdelave: 2024, nosilnost: 2.500 kg, dvižna višina: 5.850 mm, skupna dolžina: 5.130 mm, · Maximum lateral reach: 3.30 m · Reach at maximum lift height: 0.50 m · Breakout force with bucket: 4205 daN · Front overhang: 0.99 m · Dump angle: 117° · Tilt-back angle: 12° · Turning radius (over tyres): 3.31 m · Drive wheels (front / rear): 2 / 2 · Steering wheels (front / rear): 2 / 2 · Lifting time: 7.30 s · Lowering time: 4.95 s · Telescope extension: 5.20 s · Telescope retraction: 3.70 s · Tilt-in time: 3.20 s · Dump-out time: 3.20 s · Engine: Kubota, emission standard Stage V · Engine model: V3307-CR-T-E5B · Number of cylinders - cylinder capacity: 4 - 3331 cm³ · Rated engine power: 75 HP / 55.40 kW · Max. torque / engine speed: 265 Nm @ 1400 rpm · Tractive force: 3240 daN · Standard reversible fan · Engine cooling system: 2 water coolers + hydraulic oil cooler · Transmission type: hydrostatic · Number of gears (forward / reverse): 2 / 2 · Max. travel speed (may vary according to regulations): 25 km/h · Differential lock: locking differential on front axle · Parking brake: automatic negative parking brake · Service brake: oil-immersed multi-disc brakes on front axles · Pump type: gear pump · Hydraulic flow / pressure: 86 l/min – 235 bar · Fuel tank capacity: 63 l · Noise level (LpA) according to NF EN 12053: 76 dB · Environmental noise (LwA): 104 dB · Hand/arm vibration exposure: < 2.50 m/s² · Safety cab approval: ROPS - FOPS Level 1 cab · Controls: JSM Lrjdpsxd Htcjfx Ahuon

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AB0702, potovalna razdalja osi X: 650 mm, pomik osi Y: 500 mm, pomik po osi Z: 530 mm, model krmilnika: FANUC 21 iMB, obremenitev mize: 500 kg, TEHNIČNE PODROBNOSTI Pomik po osi X: 650 mm Pomik po osi Y: 500 mm Pomik po osi Z: 530 mm Pritrdilna površina mize: 800 x 500 mm Hitrost vrtenja vretena: 60 - 8.000 obr/min Vpenjalo vretena: SK 40 Standard vpenjala vretena: DIN 69871 A Največja obremenitev mize: 500 kg Lredpfx Ahsya E Thjuen Hitri pomik osi X/Y/Z: 30 m/min Menjalec orodij: 30 pozicij Premer orodja pri polni zasedenosti: 80 mm Premer orodja pri 2 praznih mestih: 120 mm Največja dolžina orodja: 250 mm Največja teža orodja: 7 kg PODROBNOSTI STROJA Krmilnik: FANUC 21 iMB Skupna potrebna moč: 30 kVA Dimenzije & Teža Dimenzije stroja (D x Š x V): 2,4 x 2,2 x 2,46 m Teža stroja: 4,5 t OPREMA NC-rotacijska os z luneto proizvajalca MECA-DIVIMEK (Španija), DCH 160 C 2 strojna primeža Sistem za dovod hladilne tekočine

Stanje: pripravljen za uporabo (rabljen), Baumüller BUC2-90/90-62-101-01 Servo Drive Good condition, tested Storage marks, warehouse discovery as shown in pictures For further technical information, please refer to the images. Scope of delivery as pictured Auction price includes 19% VAT and invoice Shipping or collection by arrangement Express shipping also possible worldwide. Ledpfxstrk Shs Ahusrn No warranty / guarantee Due to the new warranty law, we are obliged to inform you of the following: Even if the item is new or used, we sell it as a spare part without warranty, as we often deal in used goods obtained from dismantling or insolvency, making it impossible for us to offer a warranty within the legal framework. Trading between businesses is an option to exclude the legally required warranty or guarantee. If you have any questions, feel free to contact us. No. B6490

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, obratovalne ure: 4.500 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 090119, Country of manufacture: CE – Germany Voltage: 400V Net weight: 7,500 kg Dimensions: 2.9 x 2.3 x 2.3 m Operating hours: 29,731 h – Working hours: 4,500 h TECHNICAL DATA AXES Maximum travel X-axis: 400 mm Maximum travel Y-axis: 300 mm Maximum travel Z1-axis: 475 mm Maximum travel Z2-axis: 475 mm Rotational range B-axis: 0.0001 – 360° Rotational range C1/C2-axis: 0.0001 – 360° WORKPIECE Maximum cubic dimension: 80 x 80 x 80 mm Maximum weight: 5 kg TURRET HEAD Number of stations: 24 Number of driven stations: 18 Number of static stations: 6 Maximum tool holder (round): Ø 20 mm Maximum tool holder (square): 16 x 16 mm (20 x 20) Maximum turret head path above tool tip: 500 mm Speed of rotating tools: 1–9,000 rpm SPINDLE Maximum speed: 6,000 rpm Maximum bar diameter: Ø 42 mm Maximum clamping chuck diameter: 140 mm BAR MACHINING Maximum bar length for bar feeder: 1,000 mm Maximum workpiece size for bar gripper: Ø 42 x 100 mm Maximum diameter for collet gripper: 42 mm Clamping cylinder pull/push force: 20,000 N FEED DRIVES Feed force X-axis: approx. 895 daN Feed force Y-axis: approx. 895 daN Feed force Z1-axis: approx. 895 daN Feed force Z2-axis: approx. 895 daN Rapid traverse X/Y/Z axes: 20 m/min Tool control motor torque: 2.4 Nm Spindle S1 / Spindle S2: 70 Nm COOLING (Performance rate) Chip conveyor submersible pump output: approx. 10 l/min at 4.5 bar      80 l/min at 3.2 bar      150 l/min at 0.7 bar High-pressure pump (in conveyor): 10 l/min at 13.2 bar      50 l/min at 9 bar      90 l/min at 1 bar Lubrication volume in chip conveyor: approx. 134 L Coolant volume in cooling unit: 45 L CONTROLLER: Siemens 840D WORKING PRECISION Lrjdpfxsht Hg Do Ahuen Resolution X/Y/Z: 0.1 µm Resolution B-axis: 0.0001° Resolution C-axis: 0.0001° Positioning accuracy: 5 µm Repeatability: 0.6 µm Max. runout error: 0.5 µm ELECTRICAL Spindle 1 / Spindle 2 (at 100%): 11 kW Spindle 1 / Spindle 2 (at 40%): 15 kW Feed motor X/Y/Z1/Z2: 1.3 kW B-axis: 1.3 kW Tool control: 2.3 kW Hydraulic pump: 7.5 kW Hydraulic return: 0.75 kW Cooling unit fan 1 / 2: 0.18 kW Cooling unit circulation pump: 1.1 kW Cooling unit compressor: 2.2 kW Chip conveyor: 0.25 kW Emulsion pump 1: 1.1 kW Emulsion pump 2: 2.2 kW Control voltage: 400 V Network frequency: 50Hz (60 optional) Control voltage: 24V DC Total power: 35 kW Nominal current: 63A Connection: TM / TT / IT grid PNEUMATICS Maximum operating pressure: 10 bar Normal operating pressure: 6 bar Minimum operating pressure: 5 bar Air output: approx. 150 L/min Valve voltage: 24V DC Oil mist tank capacity: 12 L Quality standard: 2 according to Pneurop6611 NOISE EMISSION Normal operation: 78–80 dB Technical data subject to change; errors and omissions excepted Inventory No. 2321018; machine configuration: - Chip conveyor - Prepared for bar feeder installation Tool holders: - 6 fixed drill holders ER32 - 8 turning tool holders - 5 powered tool holders ER32 - 4 powered tool holders ER25 - 6 powered tool holders ER20

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, obratovalne ure: 55 h, nosilnost: 2.500 kg, dvižna višina: 5.850 mm, vrsta goriva: dizel, tip droga: teleskopski, gradbena višina: 1.980 mm, moč: 55 kW (74,78 KM), dolžina vilic: 1.200 mm, lastna masa: 4.710 kg, skupna dolžina: 3.894 mm, vrsta pogona: Diesel, gradbena širina: 1.813 mm, Rigid Telescopic Handler Load Centre: 500 mm Mast Type: Telescopic Transmission: Hydrostatic Speed Category: 20 km/h Technical Condition: Very good Front Tyres Type: Pneumatic Front Tyre Size: 400-55 R17.5 149A8 Front Tyre Condition: 80 - 100% Rear Tyres Type: Pneumatic Rear Tyre Size: 400-55 R17.5 149A8 Rear Tyre Condition: 80 - 100% Description: The MLT 625-75 H telehandler is a highly compact machine, specially designed for agricultural applications and supports you in all daily tasks on your farm. Its extremely compact dimensions ensure unmatched manoeuvrability, allowing access to buildings and tight spaces. The comfortable cab, sound insulation (max. 76 dB), 360° panoramic view and the JSM (Joystick Switch & Move) allow for long working days in complete safety and with minimal fatigue. The Easy Connect System (ECS) makes attachment changes at the boom head quick and easy, and the large range of compatible attachments ensures the versatility you need for your operation. Hydraulic movements are precise and smooth, and the four-wheel drive and steering, which can be set to three different modes, ensure you can respond to any situation. Lrsdpjvf R D Eefx Ahusn Equipment: 3rd hydraulic circuit, rear work lights, front work lights, heater, road homologation (StVZO), full cab, CE certificate, interior mirror, exterior mirrors, beacon, wiper, Short Description and Features: - Classic Pack - Quick drain for engine oil - Diesel pre-heating - Fully enclosed cab with heater - Mechanical Grammer textile seat - Sun visor for front and roof window - Interior rearview mirror - Car radio - Mobile phone holder - Work lights front left and right - Work lights rear left and right - Rear-view mirrors at rear of the machine - Roof window wiper - Additional double-acting hydraulics at the telescopic boom - Fork carriage - 1200mm forks - CE declaration

Stanje: rabljeno, Leto izdelave: 2005, dolžina mize: 6.000 mm, skupna dolžina: 6.000 mm, vhodna napetost: 400 V, Ercolina EB 45 z orodji za cevi v palcih Ogled in demonstracija sta možna po dogovoru Lrsdpfeyr H A Iox Ahusn

Stanje: zelo dobro (rabljeno), Thermo Scientific Thermo Scientific Forced Air Drying Oven UT 6200 F with External Temperature Control Unit Single STW150 Temperature Control System 85°C Thermo Scientific Forced Air Drying Oven UT 6200 F with External Temperature Control Unit Complete Laboratory Temperature Control and Drying System Description – Function & Application For sale is a professional temperature control and drying system consisting of: - Thermo Scientific / Heraeus Forced Air Drying Oven UT 6200 F - Single Water Temperature Control Unit STW 150/1-3-10-K5 The forced air drying oven ensures uniform temperature distribution in the chamber and is ideal for drying, heating, and tempering samples, components, or materials. Heating is provided by the external water temperature control unit (external heater), which enables highly stable, indirect, and gentle temperature control—without local overheating and with homogeneous heat distribution. Typical applications: - Laboratory & Research - Industry & Production - Material testing / Component drying - Tempering, heating, drying at constant temperature Robust laboratory and industrial quality, reliable and durable. Unit 1 – Forced Air Drying Oven: Manufacturer: Thermo Scientific / Heraeus Model: UT 6200 F Technical Specifications: - Max. temperature: 85 °C - Operating voltage: 230 V - Frequency: 50 / 60 Hz - Current consumption: 0.6 A Ledpfx Ahsymn Egeuern - Power: 0.14 kW - Protection class: IP20 Dimensions & Weight (approx.): - External dimensions: 895 × 816 × 715 mm - Internal chamber: 554 × 644 × 503 mm - Volume: approx. 180 liters - Weight: approx. 100 kg Unit 2 – Water Temperature Control Unit: Manufacturer: Single Temperiertechnik GmbH Model: STW 150/1-3-10-K5 Technical Specifications: - Heat transfer medium: Water - Connection: 400 V / 3~ / PE / 50 Hz - Current consumption: 6.9 A - Heating capacity: 9 kW - Apparent power: 4.7 kVA - Max. temperature: 150 °C Dimensions & Weight (approx.): - Dimensions: 30 × 75 × 60 cm - Weight: 55 kg Overall: Complete temperature control and drying system Operation in combination possible (external heating) Total weight: approx. 155 kg Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors excepted!) Please feel free to contact us by phone if you have any further questions.

Stanje: dober (rabljeno), Leto izdelave: 2001, številka stroja/vozila: 169134, MANITOU MLT629-120 4WD Loader No. 169134 87.6 kW Ledpfx Ahewhccdouern Year 2001

Stanje: zelo dobro (rabljeno), Thermo Scientific Thermo Scientific Forced Air Drying Oven UT 6200 F Lrjdpeykab Isfx Ahuen with External Temperature Control Unit Single STW150 Temperature Control System 85°C Thermo Scientific Forced Air Drying Oven UT 6200 F with External Temperature Control Unit Complete Laboratory Temperature Control and Drying System Description – Function & Application For sale is a professional temperature control and drying system consisting of: - Thermo Scientific / Heraeus Forced Air Drying Oven UT 6200 F - Single Water Temperature Control Unit STW 150/1-3-10-K5 The forced air drying oven ensures uniform temperature distribution in the chamber and is ideal for drying, heating, and tempering samples, components, or materials. Heating is provided by the external water temperature control unit (external heater), which enables highly stable, indirect, and gentle temperature control—without local overheating and with homogeneous heat distribution. Typical applications: - Laboratory & Research - Industry & Production - Material testing / Component drying - Tempering, heating, drying at constant temperature Robust laboratory and industrial quality, reliable and durable. Unit 1 – Forced Air Drying Oven: Manufacturer: Thermo Scientific / Heraeus Model: UT 6200 F Technical Specifications: - Max. temperature: 85 °C - Operating voltage: 230 V - Frequency: 50 / 60 Hz - Current consumption: 0.6 A - Power: 0.14 kW - Protection class: IP20 Dimensions & Weight (approx.): - External dimensions: 895 × 816 × 715 mm - Internal chamber: 554 × 644 × 503 mm - Volume: approx. 180 liters - Weight: approx. 100 kg Unit 2 – Water Temperature Control Unit: Manufacturer: Single Temperiertechnik GmbH Model: STW 150/1-3-10-K5 Technical Specifications: - Heat transfer medium: Water - Connection: 400 V / 3~ / PE / 50 Hz - Current consumption: 6.9 A - Heating capacity: 9 kW - Apparent power: 4.7 kVA - Max. temperature: 150 °C Dimensions & Weight (approx.): - Dimensions: 30 × 75 × 60 cm - Weight: 55 kg Overall: Complete temperature control and drying system Operation in combination possible (external heating) Total weight: approx. 155 kg Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors excepted!) Please feel free to contact us by phone if you have any further questions.

Leto izdelave: 2019, stanje: pripravljen za uporabo (rabljen), A Spinner simultaneous turning center featuring three turrets, complete with extensive accessories, spare parts, and tooling, is available. Travel paths X1/X2/X3: 180mm, Y1/Y2: +/-45mm, Z1/Z3: 704mm, Z2/E2: 620mm/720mm, rapid traverse X/Y/Z: 30m/min, acceleration: 0.5g. Spindle 1: speed: 5000rpm, nose: A6, bore: 65mm, chuck diameter: 210mm, power: 18kW, torque: 115Nm. Spindle 2: speed: 700rpm, nose diameter: 110mm, bore: 42mm, max. chuck diameter: 140mm, max. chuck jaw weight: 1.25kg, power: 16.6kW, torque: 100Nm. Turrets 1/2/3: turret stations: 3x12, speed: 8000rpm, tool holder: BMT 45, power: 4.3kW, torque: 13.6Nm. Machine dimensions X/Y/Z: approx. 2880mm/2130mm/1990mm, weight: approx. 7500kg, operating hours: 27102h, control: Fanuc 31i. Includes Top Automazioni bar feeder, coolant/high-pressure system with 80bar, chip conveyor, fire extinguishing system, a comprehensive tooling package, and additional spare parts. Documentation is available. On-site inspection possible. Lredpjua E Trefx Ahuon

Leto izdelave: 2015, stanje: pripravljen za uporabo (rabljen), Na voljo je CNC rezkalni stroj Spinner. Pomiki X/Y/Z: 760mm/460mm/460mm, dimenzije mize X/Y: 900mm/410mm, maks. teža obdelovanca: 350kg, število orodij: 24, maks. teža orodja: 8kg, maks. dolžina orodja: 200mm, hitrost vrtenja: 12.000 obr/min, maks. premer orodja: 80mm, držalo orodja: SK40. Dimenzije stroja X/Y/Z: pribl. 2600mm/1600mm/2850mm, teža: pribl. 4000kg. Vključno z avtomatizacijo in robotom M10. Dokumentacija je na voljo. Ogled na lokaciji je mogoč. Lredoxwn I Uspfx Ahusn

Stanje: rabljeno, Leto izdelave: 2013, A 4-axis CNC machining centre by Spinner is available. Travel distances X/Y/Z: 1600mm/810mm/700mm, rapid traverse X/Y: 18 m/min, rapid traverse Z: 15 m/min, table dimensions X/Y: 1800mm/810mm, max. table load: 2000kg, spindle speed: 10,000 rpm, power: 22kW, tool holder: SK40, tool magazine: 24 positions, weight: approx. 8,000kg. Documentation available. Inspection on site possible. Lrodpfxswqd R Uj Ahuon

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 29.199 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AK0272, Oprema: dokumentacija / priročnik, - Leto izdelave: 2006 Lodoxgrymjpfx Ahuorn - Popolnoma funkcionalen, priključen na elektriko, pripravljen za predstavitev - Z gnanimi orodji - Z nasprotnim vretenom - Krmiljenje Siemens 840 D - Vključno s transporterjem za ostružke - Premer struženja nad posteljo: 685 mm - Razdalja med konicama: 526 mm - Hodi: X 240 mm / Z 640 mm / B 520 mm - Hitri pomiki (X, Z, B): 18 / 24 / 24 m/min Neto cena naloženo ex lokacija Luckenwalde (Nemčija) brez prevoza

Stanje: dober (rabljeno), Leto izdelave: 2014, Spinner MCV 1000, letnik 2014, krmiljenje Heidenhain TNC 620, hod X/Y/Z 1016/610/508 mm, menjalec orodij za 32 pozicij, vpenjanje SK 40, pripravljeno za notranje hlajenje, velikost mize 1200 x 500 mm, največja obremenitev mize 800 kg, hitrost vretena do 10.000 o/min, vpenjanje SK 40, transporter za ostružke, 4-čeljustna glava Ø 250 mm z čeljustmi, 3-čeljustna glava Ø 315 mm z čeljustmi. Lrodpfx Aeyaqn Djhusn

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Rabljeni Spinner VC 1150, nova vretena od novembra 2025 X pomik: 1.150 mm Y pomik: 620 mm Z pomik: 800 mm Neposredni merilni sistemi na oseh X/Y/Z Krmiljenje Siemens 840DE Lodjycc Hqjpfx Ahuorn Visokonatančna rezkalna vretena do 14.000 vrt./min kot vgrajeni motor z neposrednim pogonom, brez jermena, vodno hlajenje Vpenjalna glava na vretenu: SK 40 Obratovalni čas stroja: 22.954 Magazin za orodja za 32 orodij, visokohitrostni menjalnik z dvojnimi prijemali, izvedba z hitro premikajočo verigo za orodja

Stanje: zelo dobro (rabljeno), Malo rabljeni avtomatski stroji za izdelavo TC, TU, TZ profilov. Namenjeni izdelavi in valjanju TC, TU, TZ profilov do debeline kovine 1,5 mm. Tehnične specifikacije: Izdelano v Estoniji Nastavljiva višina profila: 100 – 250 mm Lsdex Sx R Sepfx Ahusrn Širina profila: 50 mm Zavihani rob profila: 15 mm Minimalna debelina valjane pločevine: 1 mm Maksimalna debelina valjane pločevine: 1,5 mm Razdalja med valji: 300 mm Mere stroja: 900 x 4000 mm Stroj nima giljotine in perforacijskih valjev. Upravljanje je preprosto – dva gumba. Če imate dodatna vprašanja, z veseljem odgovorimo.

Stanje: rabljeno, Spinner MICROTURN 52 LTBS Submikronischer Dreh-Fräszentrum mit Y-/B-Achse und Zwillingsspindeln AUTOMATIONSFÄHIG - MC0122 Weniger als 300 Betriebsstunden Kein Stangenlader Werkzeuge und Messtaster enthalten – Für alle 3 Spindeln? BMT 45 Messtaster bleibt. Keine Werkzeuge enthalten. Spannfutter etc. inklusive: Ja Kühlschmierstoff: verwendet, wasserbasierend Art der Betriebsstätte: Forschung und Entwicklung (F&E) für Performance-Bauteile für Einspritzsysteme und Turbolader Technische Daten Arbeitsraum: Schwenkdurchmesser: 608 mm (23,9 Zoll) Max. Drehdurchmesser: 150 mm (5,9 Zoll) Max. Drehlänge: 250 mm (9,8 Zoll) Verfahrwege: X: 600 mm (23,6 Zoll) Z: 350 mm (13,8 Zoll) Y1 Revolver: +/- 50 mm (1,9 Zoll) Y2 Frässpindel: +/- 50 mm (1,9 Zoll) B-Rundachse: 180 Grad Vorschubgeschwindigkeit: Eilgang X: 24 m/min (944,8 ipm) Eilgang Y: 15 m/min (590,6 ipm) Eilgang Z: 24 m/min (944,8 ipm) Spindel #1 links / #2 rechts: Flüssigkeitsgekühlte Motorspindel mit C-Achsen-Servoantrieb und Encoder für synchrone Bearbeitung. Spindeldurchlass: 52 mm (2,0 Zoll) Drehzahl: 5.200 U/min Leistung (S6 40%): 16,5 kW (22,1 PS) Drehmoment (S6 40%): 110 Nm (81,1 ft-lb) Spindelaufnahme: DIN 55026-A6 B-Achsen-Frässpindel: Max. Drehzahl: 12.000 U/min Leistung (S6 40%): 9 kW (12 PS) Drehmoment (S6 40%): 21 Nm (15,4 ft-lb) Schwenkbereich: +/- 180 Grad Positionsmessung: Drehencoder Spannung: hydraulisch Revolver: Stationen: 12 / BMT45 Angetriebene Werkzeuge: max. 8.000 U/min Leistung (S3 25%): 4,3 kW (5,8 PS) Drehmoment (S3 25%): 13,6 Nm (10 ft-lb) Ledpfxoyzkdce Ahusrn Werkzeugmagazin: Platzanzahl: 72 Werkzeugaufnahme: HSK40 Max. Werkzeuglänge: 105 mm (4,1 Zoll) Max. Werkzeugdurchmesser: 88 mm (3,5 Zoll); 100 mm (3,9 Zoll, bei Freiplatz neben Werkzeug) Abmessungen & Elektrik: Technisches Design gemäß CE-Normen. Maschinenabmessungen: 3030 mm x 2840 mm x 2890 mm (119,3" x 111,8" x 113,8") Maschinengewicht: 7.700 kg (16.976 lbs) Betriebsspannung: 3 x 400V (+/-10 %) Frequenz: 60 Hz (+/-2 %) Elektrischer Anschluss: TN-Netz (5-polig) Standardausstattung • 72-fach Werkzeugmagazin auf dem Maschinenoberteil montiert • Hydraulische Spindelbremse auf Spindel 1 • Hydraulische Spindelbremse auf Spindel 2 • Spindelspülung Spindel 1 (umschaltbar zwischen Kühlschmierstoff oder Druckluft) • Spindelspülung Spindel 2 (umschaltbar zwischen Kühlschmierstoff oder Druckluft) • CNC-Spannkraftüberwachung und -einstellung auf Spindel 1 – komfortabel einstellbar über CNC-Programm oder Bildschirm • CNC-Spannkraftüberwachung und -einstellung auf Spindel 2 – komfortabel einstellbar über CNC-Programm oder Bildschirm • Linearer Werkzeugschlitten mit Kühlmittelzufuhr • Signallampe • Späneförderer mit Heckauswurf – inkl. Förderpumpe: 5 bar bei 20 l/min oder 3,7 bar bei 83 l/min • Hochdruck-Kühlmittelanlage mit zusätzlichem 230 Liter-Tank (61 gal), max. 22 bar (319 psi) • Renishaw-Werkzeugmesssystem zur Messung der Werkzeuge in X/Y/Z-Achse • Vorbereitung für eine Nebelabsaugung • Automatische Bedienertür, öffnet automatisch am Zyklusende und schließt mit Programmstart. Inklusive aller notwendigen Sicherheitseinrichtungen. Geeignet für manuelle Beladung oder Automatisierung. • UNIROB Universal-Roboterschnittstelle per Standardstecker am Schaltschrank mit folgenden Signalen: • Sicherheitssignale (Not-Aus/Türkontakte usw.) • Standardsignale über Profinet PN Buskoppler auf RJ45-Modul; ansonsten gemäß Unirob-V2021 Funktionsbeschreibung CNC-Steuerungssystem

Stanje: rabljeno, Leto izdelave: 2009, obratovalne ure: 4.047 h, številka stroja/vozila: LC589, Technical Specifications & Performance Data This used complete filling line is configured for aseptic carton packaging in the Tetra Pak Prisma 0.33L format. It is based on proven Tetra Pak components and offers a compact, reliable solution for high-quality industrial packaging and beverage production. The line configuration integrates filling, capping, and packaging functions with smooth container handling for stable operation and consistent output. Production speed: 7,500 units/hour Format: 0.33L Prisma (square) Container type: Carton (Tetra Pak Prisma) Line configuration: TBA19 (filler) + TCA45 (capper) + TCBP70 (packer) Filler model: TBA19 Capper model: TCA45 Packer model: TCBP70 Operating mode: Aseptic packaging line for extended shelf-life beverages Manufacturer: Tetra Pak Advanced Automation and Control Systems The line benefits from Tetra Pak engineering with integrated automation supporting stable aseptic operation. Centralized controls coordinate the filler, capper, and packer modules for synchronized throughput, precise timing, and reduced downtimes. Recipe-based settings allow consistent setup for the Prisma 0.33L format, and operator-friendly HMI interfaces facilitate monitoring, diagnostics, and quick adjustments during production. Production Line Integration Capabilities This used filling line, designed for seamless integration into a complete production environment, supports upstream and downstream connections such as infeed handling, carton supply, and end-of-line palletizing. The Prisma 0.33L format is standard in this configuration, ensuring reliable format handling and efficient changeovers within the same format family. Conveyor logic and module interfaces help maintain continuous flow and balanced line performance in used industrial packaging applications. Machine Condition and Maintenance History This used line is offered functional and ready for operation, with original model identification on the machine. The serviceable design from Tetra Pak supports routine maintenance, with wear components and aseptically critical parts accessible for inspection and replacement according to standard preventive maintenance practices. The product line is suitable for facilities looking to expand or standardize aseptic beverage production without significant commissioning delays. Ledpfx Ajzfzinjhuern Operational Performance and Versatility Optimized for aseptic processing, the system enables controlled handling from filling through capping and packaging. The TBA19 delivers precise filling under aseptic conditions; the TCA45 applies compatible closures to Prisma cartons; and the TCBP70 manages secondary packaging for efficient logistics. The result is a robust solution for industrial packaging where product protection, shelf life, and reliable throughput are prioritized.

Stanje: rabljeno, Leto izdelave: 2000, obratovalne ure: 26.600 h, številka stroja/vozila: LC612, Used Tetra Pak Line Refurbished TBA 19 200 ml Slim Technical Specifications & Performance Data This used filling line is a second-hand solution from Tetra Pak for aseptic carton packaging, configured for 200 ml slim packs. It is designed for industrial packaging and beverage production of dairy and fruit drinks, with reliable performance and efficient downstream handling. Configuration: Tetra Pak TBA/19 200B Slim Filler + TSA21 Straw Applicator + TCP70 Carton Packer + Conveyor Line + Line Controller and Paper Cart Production Speed: up to 7,500 packs/hour Pack Volume: 200 ml Slim Filling Technology: Aseptic Container Type: Carton (brick packs) Key Models and Codes: TBA/19 200B (Dev. Step 010V), TSA21, TCP70 Operating Hours: 26,600 Manufacture Years: Filler 2000, Packer 2008, Straw Applicator 2000 Advanced Automation & Control Systems The line features an industrial automation architecture suitable for high-availability food and beverage production. Evaluation indicates a GE PLC platform on downstream equipment, with recommended PLC and I/O coverage upgrades to ensure long-term reliability. Control: Central line controllers with integrated conveyor logic PLC/HMI: GE PLC upgrade recommended for downstream equipment Format Change: 200 ml slim format change kit included; additional change parts may be required for other sizes Safety: Safety guards and interlocks as standard for aseptic packaging equipment Production Line Integration Options This used filling line is designed for inline operation from aseptic filling through straw application to carton packing. Conveyor systems provide smooth transitions between machines, ensuring a balanced production flow and efficient accumulation. Inline Operation: Filler → Straw Applicator → Carton Packer Material Handling: Conveyor line connected to line controllers Application: Ideal for milk and juice in 200 ml slim cartons Scalability: Potential to adapt to additional carton sizes with appropriate change parts Machine Condition & Maintenance History The line has been assessed after maintenance work and prior to full commissioning. The filler can be operated up to the production stage (water test completed). Downstream equipment powers up but requires further interventions before heating and full operation. An overhaul is recommended, including component replacement in the superstructure, machine body, jaw system, end seal, service unit, strip applicator, and electrical systems. Current Status: Under maintenance/refurbishment Lodoyvilzjpfx Ahuorn Condition Summary: Filler fair/fixed condition

Stanje: rabljeno, Laminator za testo Proizvajalec: Seewer Rondo Lrsdpfx Ahew Nw A Teujn Model: SSO 62 Dimenzije: 305x115x120 cm Električna moč: 1,1 kW Napetost: 380V 50Hz Dimenzije traku: 62x130 cm

Stanje: skoraj kot novo (rabljeno), Termoformirni stroj Nerjaveče jeklo Kompakten in enostaven za uporabo Do 100 shranjenih programov Do 10 ciklov na minuto Lrjdpfx Ahextp I Ieusn 055 m³/h Moč: 9,5 kW Napetost: 400V / 50Hz / 3 faze

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 303.000 km, moč: 205,94 kW (280,00 KM), prva registracija: 06/2019, vrsta goriva: dizel, lastna masa: 7.100 kg, največja dovoljena obremenitev: 6.900 kg, skupna masa: 14.000 kg, konfiguracija osi: 2 osi, gorivo: dizel, zavore: zaviranje z motorjem, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 2.400 mm, Leto izdelave: 2019, obratovalna teža: 14.000 kg, Oprema: ABS, dvižna zadnja plošča, klimatska naprava, nadzor oprijema, računalnik na krovu, spojler, tempomat, IVECO 140E28 complete with box body and 1,500 kg tail lift with swing door, in excellent mechanical and bodywork condition. Lredpov Sdcbjfx Ahuen

Stanje: novo, SERRMAC TCS E TC Drill-Milling Machine (Cross Table) New "CE Marked" 3 years warranty Automatic feed High-efficiency transmission with electronic speed variator via vector inverter. Tool cooling system Tapping via inverter, complete with digital RPM counter Spindle shaft with thread for CM4 tool clamping Cross table dimensions: 800 x 255 mm Drilling capacity in steel R50: ø 50 mm Tapping capacity in steel R50: M26 Spindle taper: CM4 Spindle travel: 145 mm Quill diameter: 72 mm Automatic feed, 3 speeds: 0.05 – 0.1 – 0.2 rpm Automatic feed with electromagnetic clutch, 3 speeds: 0.05 – 0.1 – 0.2 mm/rev Prismatic column Cross table Inverter drive I Spindle speed: 45 – 2150 rpm Motor power (380 V – 50 Hz): 3 kW T-slot size: 14 mm Cross table, manual X-axis travel: 585 mm Cross table, manual Y-axis travel: 240 mm Lrjdpfjfh Si Ujx Ahuen Dimensions (h x w x d), at column: 1,986 x 1,340 x 1,280 mm Weight: 780 kg