Solo Pečica nakup rabljenega (449)

Stanje: pripravljen za uporabo (rabljen), Na voljo je talna komorna peč neznanega proizvajalca. Notranji volumen: ca. 4 m³, temperaturno območje: 50°C-400°C, notranje dimenzije X/Y/Z: ca. 1800mm/1500mm/1800mm, dimenzije stroja X/Y/Z: ca. 2500mm/2500mm/2500mm. Ogled na lokaciji je možen. Hedpfsxp Rbhjx Ahusnl

Leto izdelave: 1992, stanje: pripravljen za uporabo (rabljen), Bruto prostornina zgorevalne komore: 800l, uporabna prostornina zgorevalne komore: 500l, dimenzije zgorevalne komore X/Y/Z: 820mm/600mm/1015mm, priključna moč: 100kW, maks. obratovalna temperatura: 1400°C, dimenzije stroja X/Y/Z: ca. 1450mm/1150mm/2100mm, teža: ca. 1500kg. Vključno z ventilatorjem za svež zrak in elektro omaro z regulatorjem Jumo Imago 500. Ogled na lokaciji je možen. Hodpfx Asyfv N Rshujnl

Leto izdelave: 2015, stanje: pripravljen za uporabo (rabljen), Na voljo je komorni peč z recirkulacijo zraka Nabertherm. Priključna moč: 30kW, največja temperatura: 650°C, prostornina: 500l, čas ogrevanja: pribl. 60min, notranje dimenzije X/Y/Z: 750mm/1000mm/750mm. Dimenzije stroja: pribl. 1300mm/1900mm/1850mm, teža: pribl. 750kg. Dokumentacija na voljo. Možen je ogled na lokaciji. Hedpexrf Iuefx Ahuenl

Leto izdelave: 2001, stanje: pripravljen za uporabo (rabljen), Maks. delovna temperatura: 450°C, število ventilatorjev: 1, moč ventilatorja: 0,75kW, izguba moči: 8kW, napetost: 400V, faze: 3, frekvenca: 50Hz, električni priključek: 26/26/32A, priključna moč: 18kW, nadzorna plošča: programski krmilnik C40. Z popolno dokumentacijo. Peč je v dobrem stanju, redno pregledovana in je bila v uporabi do nedavnega. Ogled na lokaciji je možen. Hsdpfxjxz Ew Io Ahujnl

Stanje: pripravljen za uporabo (rabljen), A continuous through-feed furnace with holes is available. The furnace was part of a bending system for the production of flange rings. Machine dimensions (X/Y/Z): approx. 14,000mm / 500mm / 1,500mm. Control system: CNC. Documentation is available. Inspection on site is possible. Hedpfewkiipox Ahujnl

Leto izdelave: 2003, stanje: pripravljen za uporabo (rabljen), Površina peke: 12m², etaže: 5, mere etaže X/Y: 1200mm/2000mm, priporočena zmogljivost pri 1kg kruha: 30x5, način ogrevanja: olje, toplotna moč: 90kW, izvedba: Combitherm. Dimenzije stroja X/Y/Z: ca. 1900mm/3100mm/2450mm, teža: ca. 3000kg. Vključen dvižni stol. Dokumentacija na voljo. Možen ogled na lokaciji. Hsdpfxsx Ivids Ahuenl

Leto izdelave: 2018, stanje: pripravljen za uporabo (rabljen), Na voljo je malo rabljen peč Uterna. Notranje dimenzije X/Y/Z: 1500mm/1500mm/1000mm, moč: 38kW, maksimalna temperatura: 500°C. Dimenzije stroja: pribl. 2150mm/2650mm/2200mm. Dokumentacija je na voljo. Ogled na lokaciji je možen. Hodpoxt Rmljfx Ahuenl

Leto izdelave: 2010, stanje: pripravljen za uporabo (rabljen), A Silex continuous baking and frying oven is available. Production capacity: approx. 1,000 portions/hour. Processes: frying/baking. Power: 20 kW. Machine dimensions (L/W/H): approx. 4100 mm / 1200 mm / 1700 mm. Weight: approx. 900 kg. Documentation available. On-site inspection is possible. Hnodpfx Ahouzx Uusuol

Leto izdelave: 2015, stanje: pripravljen za uporabo (rabljen), There are two vacuum retort furnaces available: one vertical and one horizontal. Vertical retort: Xerion XRetort, year of manufacture: 2015, voltage: 400V, power: 48kW, maximum temperature: 700°C. Horizontal retort: year of manufacture: 2008, voltage: 400V, power: 18kW, maximum temperature: 700°C. An on-site inspection is possible. Hedpetndwuofx Ahusnl

Leto izdelave: 2020, stanje: pripravljen za uporabo (rabljen), A roller hearth kiln suitable for the ceramics and glass industry is available. Clear conveyor width/height: 700mm/100mm, kiln tunnel length: 6000mm, cooling zone length: 1600mm, total kiln length: 8000mm, conveyor height above floor: 900mm, max. temperature: 850°C, operating temperature: 800°C, total heating power: 75kW, number of heating/control zones: 7. Control system: Siemens Simatic HMI, regulation and automation system: Jumo mTRON 7, operating hours: 23,165h. Documentation available. On-site inspection possible. Hnodpfx Ahet R Tq Isusl

Leto izdelave: 2018, stanje: pripravljen za uporabo (rabljen), A rail hardening furnace for the production of shears is available. Working length: 3400 mm, heating zones: 2, heating capacity: 34 kW, useable space separation: SiC plates, temperature-controlled zones: 2, conveying direction: variable, machine dimensions (L/W/H): approx. 4000 mm / 1250 mm / 2100 mm. Includes automatic conveyor system and separate blowers. Documentation available. On-site inspection possible. Hjdpowftciefx Ahujnl

Leto izdelave: 2023, stanje: pripravljen za uporabo (rabljen), Na voljo je krožni konvekcijski peč WP. Dimenzije pekačev X/Y: 600mm/800mm, največja diagonala vozička za peko: 1070mm, največja višina vozička: 1800mm, površina peke: 10m², največja obremenitev plošče: 350kg. Dimenzije stroja X/Y/Z: cca 1550mm/1650mm/2550mm, teža: cca 2000kg, upravljanje: Navigo 3. Dokumentacija je na voljo. Ogled na lokaciji je možen. Hedpfx Ahsx Ivikousnl

Stanje: zelo dobro (rabljeno), 310 RABLJENA Pekarska konvekcijsko-mikrovalovna peč, turbinska peč. TEHNIČNI PODATKI: - napetost: 380V, - moč: 3 kW. Možnosti na doplačilo: prevoz. Navedena cena je neto cena. GOVORIMO ANGLEŠKO, NEMŠKO, FRANCOZSKO, RUSKO IN UKRAJINSKO. Hnsdpfx Asyi Urxshuol

Stanje: zelo dobro (rabljeno), 309 RABLJENA Mikrovalovna pečica Panasonic. ZUNANJE MERE (v cm): - višina 47, - širina 65, Hodpoyi Um Nefx Ahuonl - dolžina 75. Na voljo so plačljive možnosti: prevoz. Navedena cena je neto. GOVORIMO ANGLEŠKO, NEMŠKO, FRANCOŠKO, RUSKO IN UKRAJINSKO.

Leto izdelave: 2001, stanje: dober (rabljeno), 1 rabljena kalilna peč Proizvajalec: Nabertherm, tip N 321 Serijska številka: 160897, Leto izdelave: 2001, Maksimalna temperatura: 1.200°C, Priključna moč: 400V, 47 kW Notranje mere: 750 x 1100 x 400 mm Hnedjxpf I Nopfx Ahujl Uporabna prostornina: 320 litrov Teža cca. 1,6 t Dimenzije: Dolžina cca 2 m, širina cca 1,5 m, višina cca 2 m,

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating large usable areas, such as production halls and workspaces in craft and industrial businesses. These hot air systems require no lengthy heat-up phases and heat up the workshop, joiner’s or carpenter’s facility, and other production areas within a very short time. Solid wood and its by-products, such as solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes, are used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the requirements for emission values in accordance with the 1st BImSchV. Hodpfx Ajvz Hq Tehuenl - Automatic and continuous operation modes - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Space requirements: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 291 °C - Hot air outlet connectors: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlet are located at the rear, lower part of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and trade businesses. They have been developed for heating larger spaces, such as workshops and production halls in craft and industrial facilities. These hot air systems require no long heat-up phases and are capable of quickly warming up carpentry or joinery workshops and other production areas. Fuel types include solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages stipulated by the 1st German Federal Immission Control Ordinance (1. BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output: 43,000 kcal - Fuel consumption: 15 kg/h Hedpfx Aevz Hq Hohusnl - Air throughput: 4,900 m³/h - Firebox depth: 650 mm - Loading door: 370 x 350 mm - Hot air fan: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable surface: approx. 220 m² - Footprint: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney draft: 13 Pa - Flue gas temperature: 290°C - Hot air outlet connections: 2 x Ø 200 mm - For further data, please refer to the attached data sheet. The two air outlet nozzles for the hot air are located at the lower rear of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industry and trade businesses. They are designed for heating large usable areas such as factory halls and workspaces in craft and industrial companies. These hot air systems require no lengthy warm-up phases and can heat production facilities such as carpentry or joinery workshops as well as other workplaces extremely quickly. The fuel can be solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety standards of Directive 89/392/CE. All models of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission limits required by the 1st BImSchV. - Automatic operation and continuous air mode - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h Hsdpfxevz Hqyj Ahusnl - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2-0.3 mbar - Draft requirement at nominal load: 0.18 mbar - Heatable volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Required space: Width 1700 mm, Depth 2000 mm, Height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connector): 300 mm - Recommended chimney diameter: 350 mm - Efficiency: 85-90% - Flue draft: 11.5 Pa - Flue gas temperature: 289 °C - Hot air outlet sockets: 2 x Ø 450 mm - For more technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlets are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per connector is permitted for air distribution. Longer pipe runs are possible on request and with the manufacturer’s approval. Please contact us for further information.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 600 x 800 x 1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and trade businesses. These units are designed for heating larger utility areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems do not require long heat-up phases and can heat the workshop, joinery, carpentry hall, or other production sites in a very short time. Solid wood and its by-products can be used as fuel, including solid wood panel remnants, chips, sawdust, pellets, or briquettes. Hnjdpfxsvz Hqto Ahuol The MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations of Directive 89/392 EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st German Federal Immission Control Ordinance (BImSchV) regarding required emission limits. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox vacuum: 0.2–0.3 mbar - Required flue draft at rated output: 0.18 mbar - Heatable volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90 % - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm - For further details, please refer to the attached data sheet The two pipe connections for the hot air outlets are located at the rear of the furnace in the lower section. A maximum of 20 meters of ducting per pipe connection is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Warm Air Furnace MARTINA 30 The MARTINA warm air furnaces provide an ideal solution for energy utilization in wood-processing industrial and craft businesses. These units are designed for heating large working areas such as workshops and workspaces in trade and industrial settings. These warm air systems require no lengthy heat-up phases and heat up joinery or carpentry shops as well as other production facilities in a very short time. Hedpfxovz Hqmj Ahusnl Fuel materials include solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety requirements set out in EC Directive 89/392. All warm air furnaces in the MARTINA series—15, 30, 55, 85, 120, 180, 240, and 350—meet both emission limit stages as required by the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 29.8 kW - Thermal output: 25,700 kcal - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Chimney diameter (guideline): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connectors: 2 x Ø 200 mm - For further data, please refer to the attached data sheet The two outlet connectors for the warm air are located at the lower rear of the furnace. A maximum pipe length of 20 meters per outlet is permissible for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 1300x1700x2550 mm Weight: 1200 kg Total power requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed to heat large usable areas such as workshops and working spaces in both craft and industrial settings. These hot air systems require no lengthy heat-up phases and are able to quickly warm carpentry or joinery halls and other production facilities. Solid wood and its by-products, such as remnants of solid wood panels, chips, sawdust, pellets, or briquettes, can be used as fuels. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations from Directive 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the required emission values under the 1st BImSchV. - Automatic operation and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 Kcal - Fuel consumption: 50 kg/h - Air delivery: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm Hnjdpfxsvz Hqge Ahuel - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space requirement: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Chimney diameter (reference): 300 mm - Efficiency: 85-90% - Chimney pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 450 mm - For further technical data, please refer to the attached data sheet. The 2 outlet nozzles for the heated air are located at the rear, in the lower part of the furnace. A maximum length of 20 meters of duct is permitted per outlet for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft enterprises. Designed for heating larger operational areas such as factory halls and workshops in both craft and industrial sectors, these hot air systems require no long heat-up phases and can quickly warm up carpentry or joinery shops and other production facilities. Solid wood and its by-products, e.g., solid wood panel offcuts, chips, sawdust, pellets, or briquettes, serve as fuel material. The MARTINA hot air ovens comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the equipment safety directive 89/392 CE. All hot air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the emission limits required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air flow rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft required at rated output: 0.18 mbar - Heatable room volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirement: width 800 mm, depth 1170 mm, height 2300 mm - Weight: 650 kg - Flue pipe diameter (spigot): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85–90 % - Chimney draft pressure: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet nozzles: 2 x Ø 220 mm - For further specifications, please refer to the attached data sheet The two pipe nozzles for hot air output are located at the lower rear side of the furnace. A maximum of 20 meters of ducting per nozzle is allowed for air distribution. Hedpfx Ahjvz Hhxsujnl

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, To je dvoposodovni sistem. Stroji so bili kupljeni novi leta 2023 in projekt se je kmalu zatem zaključil. Hodpfx Ahjyizzaeujnl Dodatne specifikacije in cene na zahtevo!

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, skupna masa: 400 kg, notranja višina: 230 mm, notranja dolžina: 600 mm, notranja širina: 300 mm, Brez najmanjše cene – zagotovljena prodaja najvišji ponudbi! Stroj se draži zaradi razpusta obratovanja. Ponudba zavezuje k pravočasnemu prevzemu med 26. 01. 2026 in 29. 01. 2026! TEHNIČNI PODATKI Notranje dimenzije: 600 x 300 x 230 mm Hnodpfoxqnzbox Ahuol PODROBNOSTI O STROJU Dimenzije in teža Dimenzije (D x Š x V): 900 x 900 x 1.700 mm Teža: 400 kg

Leto izdelave: 2002, stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, skupna masa: 150 kg, notranja višina: 140 mm, notranja dolžina: 320 mm, notranja širina: 250 mm, temperatura: 1.100 °C, številka stroja/vozila: 168493, Brez izklicne cene – zagotovljena prodaja najvišjemu ponudniku! Hsdpfx Aoxqny Dshuenl Stroj se draži zaradi likvidacije podjetja. Oddaja ponudbe zavezuje k pravočasnemu prevzemu med 26.01.2026 in 29.01.2026! TEHNIČNI PODATKI Maks. temperatura: 1.100 °C Notranje dimenzije: 320 x 250 x 140 mm PODATKI O STROJU Električni podatki Obratovalna napetost: 230 V Frekvenca: 50 / 60 Hz Nazivni tok: 13 A Priključna moč: 3,0 kW Dimenzije in teža Dimenzije (D x Š x V): 600 x 550 x 1.500 mm Teža: 150 kg