Sfs Gmbh Brezsredinski Valjčni Brusilni Stroj nakup rabljenega (86.648)

Leto izdelave: 1994, stanje: rabljeno, Rabljeni stroj Leto izdelave: 1994 Oprema in tehnični podatki: Delovna širina: 300 mm Oscilacija brusnega traku: mehanska Vodila valjev: oplaščena z gumo Brusilna enota: z brusilnim copatom Hitrost pomika: 2-stopenjska Ppodpfxszk Nucs Altow Smer podajanja: preklopna (naprej/nazaj) Zagon motorja: zvezda-trikot Priključitev na omrežje: 380 V Teža: ca. 450 kg Razpoložljivost: takoj Lokacija: Baden-Württemberg

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Priključna moč 380 V, 15 A Psdeznv Uwspfx Altopw Motor za brušenje 5,5 kW Motor za podajanje 0,37 kW Širina brusnega pasu 200 mm Dolžina brusnega pasu 1800 mm Pnevmatični priključek 6 bar Hitrosti podajanja 6 / 11 / 16 m/min Električna nastavitev višine mize Izpih pasu Priključek za odsesavanje 140 mm

Stanje: rabljeno, Leto izdelave: 2024, Nova razstavna naprava! Maloprodajna cena: 4.938 € neto. Zgornji del je izdelan iz robustne litega jekla in vsebuje vgrajen trifazni motor 380 V, 2,2 kW, 2850 vrt/min; naprava je opremljena z vgrajeno kombinacijo stikala in vtičnice; varovalo motorja in glavno stikalo v skladu s standardom VDE; dimenzije zadnje plošče brusilnega pasu: 850 x 150 mm; jeklena miza je nastavljiva po višini s pomočjo vzmetne sile; dimenzije brusilnega pasu: 150 x 2280 mm; zadnja plošča brusilnega pasu je obložena z grafitnim drsnim slojem; naprava je dobavljena s kompletom brusilnih pasov; vključeno je tudi podaljšek in omejevalnik za kota. Naprava je, ob priključitvi na osrednji sistem za odsesavanje, preizkušena glede prahu pri minimalni hitrosti zraka 20 m/s (GS) – Holz-BG-Stuttgart. Serijska oprema: - možnost nagiba 90–180° - motorizirana oscilacija pasu - majhna oporna miza ob vodilni roli - pnevmatska napenjalna naprava za pas Tehnični podatki: Moč motorja: 2,2 kW Dimenzije brusilnega pasu: 150 x 2280 mm Hitrost brusilnega pasu: 22 m/s Velikost mize: 750 x 350 mm Prostorske zahteve: 1000 x 800 mm Teža: od 180 kg Premer odsesovalnega priključka: 100 mm Pjdjx Hwpvspfx Altjpw Lokacija skladišča: Rieth.

Stanje: rabljeno, Leto izdelave: 2002, Rabljeni stroj Leto izdelave: 2002 Ppsdpfsw I U Ahjx Altow Robni brusilni stroj z elektromehansko oscilacijo prek 15 mm nihajnega hoda motornega diska. Nagib brusilnega agregata ročno z ročico za 90° (brezstopenjska nastavitev kota; odčitek po lestvici). Dodatna miza z odsesavanjem za uporabo brusnih valjev. Višinsko nastavljiva miza za optimalno izrabo brusnega traku. Motor: 2,2 kW Oscilacijski motor: 0,11 kW Velikost mize: 880 x 370 mm Mere pasu: 150 x 2580 mm Dimenzije stroja: 1700 x 1000 x 1150 mm Teža: 250 kg Razpoložljivost: kratkoročno Lokacija skladišča: Flörsheim

Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, skupna širina: 1.600 mm, skupna višina: 2.000 mm, skupna dolžina: 2.000 mm, delovna širina: 1.100 mm, širina brušenja: 1.100 mm, skupna masa: 1.187 kg, višina brušenja: 170 mm, vrsta nastavitve višine: električni, vrsta vhodnega toka: trifazni, višina obdelovanca (maks.): 170 mm, širina brusilnega traku: 1.115 mm, premer ekstrakcijske šobe: 160 mm, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, - Italian-made - DTR (Technical Documentation) and CE certification TECHNICAL SPECIFICATIONS: - Maximum working width: 1100 mm Ppsdpsytp Agefx Altjw - Maximum working height: 170 mm - Minimum working height: 3 mm - Minimum workpiece length: 370 mm - Sanding belt dimensions (width/length): 1115 x 1900 mm - Feed motor power: 0.8 kW - Two feed speeds: 4.5 and 9 m/min - Height adjustment motor power: 0.25 kW - 2 units: 1) Grooved metal calibration roller, diameter 140 mm - Rubber pressure roller 2) Grooved rubber roller + shoe + metal roller - Rubber pressure roller - Motor power for Unit I & II: 15 kW - From below: - 3 idle rollers - Conveyor belt - 3 idle rollers - Pneumatic belt oscillation - Air blower for the second sanding belt - Electric + manual table height adjustment (for precise setting) - With pneumatic brake - Sanding belt speed: 16 m/s - Working pressure: 6 - 8 bar - Extraction port diameter: 2x160mm, 2x110mm Machine dimensions: - Overall dimensions (L/W/H): 2000x1600x2000mm - Weight: 1200 kg

Stanje: dober (rabljeno), Stroj je v dobrem stanju in opremljen z dodatno opremo. Podpfowu Ey Eox Altopw

Stanje: rabljeno, Wide Belt Sander SBF SATEFANI 2W126 - Machine in stock - Refurbished - Very good condition TECHNICAL DATA: - Maximum sanding width: 1100 mm - Maximum workpiece height: 160 mm - Minimum workpiece thickness: 3 mm - Main motors: 2 x 11 kW - Feed motor: 2.2 kW - Height adjustment motor: 0.37 kW - 1 rubber roller 65 Shore, diameter 270 mm - 2 rubber rollers 45 Shore, diameter 400 mm - Two feed speed options - Pneumatic oscillation on limit switches - Suction port diameter: 2 x 150 mm - Belt in very good condition Machine dimensions: - Length: 280 cm - Width: 180 cm - Height: 250 cm Psdpocvwf Tefx Altopw - Weight: approx. 3000 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.350 mm, skupna masa: 4.200 kg, Fine Finishing and Smoothing Sander Heesemann, Type: FGA 6 For intermediate lacquer sanding, wood smoothing, and sanding of films/foils The machine is fully operational, well maintained, and in very good technical condition. The conveyor belt has been replaced. Sanding width: 1300 mm Working height: 880 mm, constant Maximum workpiece thickness: 3–80 mm Transport bed: Equipped with individual transport belts Drive: 2.5 kW three-phase motor, including blow-off device Feed speed: 4.5 – 22 m/min infinitely variable Aggregates Brush roller unit: Centrally height-adjustable Diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Longitudinal sanding unit: - Stepless, electronic regulation of the belt speed via frequency inverter - Maintenance-free brake system - Pneumatic belt tensioning - Intermittent belt cleaning device - Infrared belt control - Belt operates in counter-rotation Abrasive belt dimensions: 2620 x 1350 mm Pedpfx Aeya I Iujltopw Abrasive belt speed: 0.3 – 12 m/s Drive power: 11 kW Graphical operating terminal for input of machine settings, including numeric thickness adjustment, disturbance indication, workpiece feed, and feed speed display Electronically controlled pressure beam Distance between guide rollers: 40 mm Pneumatic belt tensioning The pressure beam contact surfaces automatically adjust to the shape of the passing workpieces Workpiece suction clamping system: Fan with 5.5 kW drive power Operating side and terminal: Left Operating voltage: 400 V; 50 Hz Space requirements: 2550 x 2220 x 2300 mm Weight approx.: 4200 kg (Subject to technical changes, errors, and prior sale)

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 950 mm, višina brušenja: 170 mm, vrsta nastavitve višine: električni, vrsta vhodnega toka: trifazni, - italijanska proizvodnja - leto izdelave: 2007 - kombinirana čeveljska enota TEHNIČNI PARAMETRI: - širina brušenja: 950 mm - višina brušenja: 4-170 mm Psdpfx Alsxdxfqstjpw - moč motorja: 11 kW - 1. agregat: jekleni valj s pnevmatskim pritiskom - premer valja: 110 mm - 2. agregat: kombinirana čeveljska enota - pnevmatski pritisk gumijastega valja: 78 Shor'a - čevelj s pnevmatskim pritiskom - pnevmatska oscilacija - vpih na trakove - električna nastavitev višine - dve hitrosti traku: 8,3 m/s in 16 m/s - elektronsko pozicioniranje višine brušenja - gladko nastavljiva hitrost pomika: od 4-20 m/min - minimalna dolžina materiala: 500 mm - premer nastavka: 2 x 140 mm - dimenzije stroja (d/š/v): 150 x 180 x 210 cm - teža: ~ 1010 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, Wide Belt Sander DMC USK 1350 M3 – Italian-made – Cross-belt unit, also known as a 'sergeant' unit – Year of manufacture: 2011 – Equipped with both electric and pneumatic ionizers TECHNICAL SPECIFICATIONS: Maximum sanding width: 1350 mm Sanding height range: 4–170 mm Minimum workpiece length: 365 mm Vacuum table 1st Unit: – Cross-belt (sergeant-type) – Motor power: 12 kW 2nd Unit: – Rubber roller – Hardness: 95 Shore – Diameter: 240 mm – Motor power: 18.5 kW 3rd Unit: – Rubber roller – Hardness: 55 Shore – Roller diameter: 300 mm – Motor power: 15 kW 4th Unit: – Pneumatic pad – Motor power: 15 kW 5th Unit: – Cleaning brush – 2.2 kW 6th Unit: Pjdpogr Er Sofx Altopw – Air blower – Blowing on belt – Pneumatic oscillation Feed speed: 2.5–18 m/min Pneumatic belt tensioning Electric height adjustment Extraction port diameters: 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm Transport dimensions (L/W/H): 370 x 250 x 250 cm Weight: 5000 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, stroj za rezljanje in brušenje, avtomatski model PADE UINZE 2+2 rabljen stroj delovni pogoji: odlični CE-direktiva: DA stroj je namenjen proizvodnji delov za mize, stole, pohištvo, lesene embalaže itd. stroj hkrati izvaja obdelavo oblike in brušenje na dveh straneh obdelovanca s pomočjo ustrezne šablone, izdelane glede na želeno obliko. opremljen s kabino za zaščito pred nesrečami in zaščito pred hrupom, kot je prikazano na fotografiji Tehnični podatki: stroj sestavljen iz štirih delovnih enot: 1+1 enota za rezljanje. Moč motorja 10 KM na enoto 1+1 enota za rezljanje ali enota za brušenje. Moč motorja 5 / 6,5 KM na enoto (2 hitrosti) največja delovna širina: 350 mm največja delovna višina: 180 mm največja delovna dolžina: 2500 mm hidravlična črpalka z motorjem 5,5 KM Pedpjzk I Egjfx Altjpw nastavljiva hitrost podajanja hidravličnega drsnika: 1:15 m/min hitrost vračanja hidravličnega drsnika: 40 m/min napetost: 380/50 nameščena skupna moč: 30 kW teža: 3500 kg

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), Na voljo je CNC-stroju za zunanje krožno brušenje Roweig, ki potrebuje popravilo. Višina med centri: 310 mm, maks. premer obdelovanca: 600 mm, maks. dolžina brušenja: 1410 mm, maks. dolžina vpenjanja: 1500 mm, maks. premer brusilnega vretena: 600 mm, maks. teža obdelovanca: 500 kg/120 kg. Hitrost vretena: 500 vrt/min, vpenjalna matica vretena: MK6, vrtni konični nastavek: MK5, nagib: -30°, kompenzacija cilindričnega nastavka: +/- 0,15 mm, delitev: 0,001 mm, maks. premik v osi X: 25 mm, hitrost mize: 10 m/min, maks. pot mize: 1680 mm. Pot giba brusilnega vretena: 600 mm, hitrost podajanja: 10 m/min. Dimenzije brusilnega telesa X/Y/Z: 630 mm/100 mm/304,8 mm, moč: 11 kW, maks. hitrost: 50 m/s, število brusilnih vreten: 2, kot nagiba rotirajočega dela: -30°/195°, nastavitev vretena: -30°/15°. Dimenzije stroja X/Y/Z: pribl. 5250 mm/2450 mm/2200 mm, teža: pribl. 7500 kg, nadzor: Siemens Sinumerik 802D sl. Hladilni sistem vretena je pokvarjen. Dokumentacija je na voljo. Možen je ogled na licu mesta. Ppedozmylqjpfx Altow

Stanje: zelo dobro (rabljeno), Z digitalnim prikazovalnikom Z notranjo brusilno napravo Višina konic 240 mm Razdalja med konicama 2500 mm Brusilni kamen 750 x 200 x 305 Hitrost brusilnega kamna 890 / 1.120 vrt/min Vpenjalna glava obdelovanca vrtljiva za 90° Konus konjička MK5 Razni dodatki Ppedpezhmfyefx Altjw MARCELS MASCHINEN AG

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Rabljeni tangencialni brusilni stroj RS. Ppedpfszh E Efjx Altew

Stanje: rabljeno, TECHNICAL DATA - Spindle speed: 5 – 300 [rpm] - Minimum C-axis resolution: 0.001 [degrees] Podpfx Aljx Av Adetspw - Vertical travel of main spindle: 130 [mm] - Vertical travel of main spindle (manual operation): 140 [mm] - Grinding spindle speed with motor: 4,500 – 80,000 [rpm] - Grinding spindle speed with turbine: 100,000 – 160,000 [rpm] - Cylindrical grinding without/with intermediate plate max.: 230 / 360 [mm] - Maximum grinding length Z (with bar): 125 [mm] - Maximum taper angle for taper grinding: 16 [degrees] - Max. grinding depth for taper grinding with angle: 44 [mm] LINEAR AXES - Travel X/Y/Z axes: 700 / 500 / 500 [mm] - Rapid traverse speed (X/Y): 4,000 [mm/min] - Feed speed (X/Y): 0 – 2,000 [mm/min] TABLE - Table size: 770 x 630 [mm] - Maximum table load: 500 [kg] - Distance from table to spindle nose: 0 – 600 [mm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] WEIGHT AND DIMENSIONS - Footprint: 2,650 x 2,577 [mm] - Machine height: 2,677 [mm] - Machine weight: 5,600 [kg] MACHINE HOURS - Operating hours: 44,995 [h] EQUIPMENT - Control: Fanuc - Coolant tank * with high-pressure pump * with paper filter - Oil mist extractor - Fire extinguishing system * * NB: Functional reliability not guaranteed. To be inspected by a qualified company commissioned by the buyer.

Leto izdelave: 2013, stanje: rabljeno, Anzahl der Schleifaggregate 4 st. Schleifbreite max. 200 mm Schleifhöhe max. 7-150 mm Vorschubgeschwindigkeit 8-16 m/min Schleifbandgeschwindigkeit 18-30 m/sec Stähle-Hess Schleifmaschine Saturn-Duo ----- Technische Herstellerbeschreibung: Stähle Hess Finish-Schleifmaschine Typ Saturn Duo mit 2 Schleifaggregaten, zusätzlich oben und unten Roto Finish Schleifeinrichtung. 1 oberes Schleifband 1 unteres Schleifband 2 obere Roto-Finish Schleifeinrichtung 2 untere Roto-Finish Schleifeinrichtung Werkstückabmessungen Höhe: 7–150 mm Breite: max. 200 mm Mindestlänge: 300 mm Bandgeschwindigkeit: 18–30 m/s (variabel) Ppsdpey Spvlefx Altew Vorschub 8–16 m/min (variabel) ----- Preis der o.g. Maschine auf Anfrage! ----- Info: Maschine war in Verbindung mit einer Weinig Variomat Vierseitenhobelmaschine im Einsatz siehe Lager Nr. #7007 (technische Angaben laut Hersteller - ohne Gewähr!) Alle angegebenen Preise netto. zzgl. gesetzl. Mwst.

Stanje: dober (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Velikost mize: 3000 x 1000 mm Psdpfjzlh Nzex Altopw Moč pogona: 4,0 kW Hitrost brusnega traku: 8 – 25 m/s Nastavitev višine mize: 0 – 630 mm Dolžina brusnih trakov: 9000 mm Potreben prostor: 4750 x 2300 mm Višina stroja: pribl. 2500 mm Stisnjen zrak: 6 bar Lastnosti: -dva brusna traka za predhodno in končno brušenje -trikotno vodilo trakov za prost pogled in neomejeno gibljivost -pnevmatska napenjalna naprava za brusne trake s krogličnimi ležaji -nastavljiva hitrost traku -nagib brusnih trakov do 90° -brusni trak se samocentrirajoč -pnevmatsko odpiranje kanalov za trak -ročno premikanje obdelovanca v 3 osi -vsaka os ima zavoro ali zapore -vakuumsko vpenjanje obdelovancev

Stanje: novo, Leto izdelave: 2023, New machine Podpfxszi Hwfe Altepw Year of manufacture: 2023 MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside of our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Features and technical data: • Intermediate lacquer sanding (Cd-L) version • Robust, space-saving single-wide belt sander designed for demanding calibration and final sanding • Constant working height ensured by upper section adjustment • Working width: 1350 mm • Overhead sanding with combination unit • Complete sanding unit tiltable up to 10° • Grooved rubber contact roller with proven hardness • Infinitely adjustable contact roller height with abrasive grit scale • Pneumatic lifting/lowering of the contact roller based on aggregate selection • Sanding pad with quick-change sliding coating • Parallel spring-loaded, ground steel pressure roller at infeed • Rubber-coated pressure roller at outfeed • Belt drive motor: 11 kW (1100 mm), 15 kW (1350 mm), 18.5 kW (1600 mm), 400 V/50 Hz; soft start for low current draw on startup • Motorized, finely adjustable height adjustment with digital display • Belt tensioning, tracking, and oscillation are pneumatic; compressed air consumption approx. 2 l/min • Optimum safety with automatic emergency stop via disc brake in the event of belt breakage, belt misalignment, loss of pressure, or opening of belt entry door • Workpiece feed motor 1.1 or 1.5 kW with fabric-reinforced rubber conveyor belt • Vacuum unit for work table with small parts area, integrated fan in machine base • Complete electrical system with contactor control; automatic star-delta starting of main motor, motor protection and ammeter for monitoring material removal • Maximum workpiece height: 200 mm • Belt dimensions: 1350 x 2000 mm • Automatic thickness adjustment across the entire working width • Workpiece over-thickness protection with feed emergency stop and automatic lifting of main unit • Stepless adjustment of material removal rate • Electronic feed control at operator panel, stepless 3 – 15 m/min • PLC control/programming with color touchscreen and TEACH-IN memory function (results saved with button press based on sanding result, no manual input required) • Pneumatic conveyor belt tracking control • Workpiece support tables at infeed and outfeed • ENORMATIC: fully automatic quick setting and feed initiation (very useful for large workpieces) • eco*-energy saving mode • Fault diagnostics • Order and operating hour counters - Electronic segmented sanding pad, segment width 22 mm (special pivoting version) - Variable sanding belt speed (programmable memory) - Air nozzles for sanding belt cleaning, operationally controlled, additional extraction port - Additional sanding shoe insert for lacquer sanding Includes swiveling air knife Availability: short-term Location: Flörsheim

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, The robust Junior R1 offers all the features expected from a modern edge sanding machine. A heavy-duty grey cast iron sanding unit with a powerful motor delivers maximum sanding performance. The working table, adjustable in height by spring pressure, allows for optimal belt utilization and safe operation. Optional upgrades include belt oscillation, stepless unit tilting, a veneer sanding device, and an additional table for sanding work on the deflection roller. The machine is supplied with a set of sanding belts; a square and mitre gauge are also included in the delivery. Technical data: • Motor power: 2.2 kW • Sanding belt size: 150 × 2280 mm • Belt speed: 22 m/sec. • Table size: 750 × 350 mm • Space requirement: 1000 × 800 mm • Weight: from 180 kg • Extraction port Ø: 100 mm Location: In stock at 54634 Bitburg Ppeded R Ev Depfx Altjw - free loading - Can be shipped for a fee

Stanje: novo, Leto izdelave: 2024, The Uniq series forms the genuine foundation of our product range, incorporating all the features that have earned Kündig’s edge sanding machine its reputation on the market as a robust and versatile precision instrument. A key component of its extremely heavy-duty construction is the motorized oscillating sanding unit, which offers a maximum oscillation stroke of 90 mm and motorized tilting capability of up to 45°. All standard edge processing operations can be performed at up to four sanding stations. Kündig Uniq Edge Sander – Front and Rear Ingenious Design – The Sanding Unit The heart of all our edge sanders is the sanding aggregate, which boasts a range of intelligent features and properties. Unlike conventional systems that oscillate by tilting the belt rollers, our machines move the entire sanding unit up and down. Both the oscillation stroke and oscillation range can be easily set at the push of a button. Thanks to flexible settings and the long oscillation path, the sanding belts can be used optimally across their entire width without laborious adjustments to the table height. The oscillation mechanism is driven by a separate motor. Tilting the sanding aggregate is also done conveniently using a rotary switch and its own dedicated motor. The unit can be tilted between 90° and 45°. Thanks to a well-designed swiveling mechanism, full oscillation is available at all times, and double-sided sanding is possible—even simultaneously. Different table heights for the front and rear sanding stations ensure that the belt isn’t used at the same height on both sides. Furthermore, the combination of swiveling mechanism and varying table heights guarantees that the gap between the sanding aggregate and the worktable remains minimal at any tilt angle. Changing the sanding belt is also effortless and takes only seconds. The Four Sanding Stations Ppsdpfxofig Rwe Altjw 1. Sanding Station: “Veneer Side” The front sanding station is designed for precise calibration of materials and functions like a jointer. The infeed fence can be adjusted via a handwheel to set the depth of cut with a precision of tenths of a millimeter. Important: The fence is not tilted. Infeed fence, sanding pad, and outfeed fence are always parallel to each other, effectively preventing rounding of workpieces. Fine adjustment of the sanding pad for grit compensation and for zero positioning between fences and pad is done using a handwheel. The heavy-duty work table on this side is equipped with sliding surfaces. 2. Sanding Station: “Solid Wood Side” This station is ideal for sanding flat, angled, chamfered, or externally radiused workpieces. Here, too, the entire sanding aggregate oscillates. The belt runs the full width over a cool-running graphite surface. A mitre fence is also included on the solid wood side. Included Accessories: – Half-round table – Additional table with sanding rollers Location: From stock, 54634 Bitburg – Immediately available –

Stanje: novo, Leto izdelave: 2026, Heavy-duty machine stand ensures high torsional rigidity and vibration-free operation Improved grinding results thanks to sanding belt oscillation via separate geared motor Oscillation can be activated as required Veneer edge sanding device with fine adjustment as standard Grooved infeed fence for sanding veneer overhangs Quick conversion from veneer to solid wood sanding Height-adjustable sanding table for utilizing the entire sanding belt width Height adjustment of the sanding table and sanding unit swiveling via handwheels Height-adjustable auxiliary table with extraction for sanding radii Optimal chip extraction through extraction at the unit and cross table Automatic compensation of belt length differences by spring-loaded belt tension Dimensions and weights Length approx. 1900 mm Width/depth approx. 810 mm Height approx. 1230 mm Weight approx. 290 kg Dust extraction connection Extraction port diameter 120 mm Drive power Oscillation motor 0.25 kW Work table(s) Work table length 960 mm Work table width 352 mm Work table height adjustment 210 mm Cross table height min. 730 mm Electrical data Total connected load 3 kW Connection voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Sanding unit Sanding belt length 3000 mm Sanding belt width 150 mm Belt speed(s) 20 m/s Sanding area length 1050 mm Sanding area width 220 mm Swivel range 0 – 45 ° Ppsdpoff Ed Tofx Altjw Oscillation stroke 20 mm Availability: Short notice

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, 5222454 LIBRA 45/2 RTC 135 Wide Belt Sander 5257433 “Z” Version for RTC 135 5257452 Vacuum table with electric fan 3kW 5257453 Oscillating belt air blow-off device for 5257454 Oscillating belt air blow-off device for 5257462 Reinforced motor 15 kW (20 HP) 5257485 Roller table at infeed and outfeed for Pedpfx Aloy Ehiwotepw 5257499 Grooved rubber pressure rollers, 2nd position 5257500 Grooved rubber pressure rollers, 3rd position 5257504 Infinitely variable conveyor feed with inverter 5257605 Inspection door with window 5257606 LED lamp for internal lighting TECHNICAL DATA Dimensions and Weights Length (approx.) 1800 mm Width/Depth (approx.) 2000 mm Height (approx.) 2070 mm Extraction Connection Number of extraction ports: 2 Extraction port diameter: 200 mm Electrical Data Feed motor power: 0.8 kW Connection voltage: 400 V Line frequency: 50 Hz Height adjustment motor power: 0.25 kW Output power (main motor): 11 kW Sanding Unit Sanding belt length: 2150 mm Sanding belt width: 1370 mm Maximum sanding width: 1350 mm Feed Unit Feed speed: 4.5 / 9 m/min Workpiece Minimum workpiece height: 4 mm Maximum workpiece height: 170 mm Product Information EU 2023/2854 Type of data generated: Usage data Format of generated data: Common, machine-readable formats such as JSON Data volume: Up to 5 MB Continuous real-time data generation: Yes Data storage location: On the device and on a remote server Data access: On device and via physical as well as wireless interfaces Location: ex stock 54634 Bitburg - Available immediately -

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Holzkraft Edge Sanding Machine Model: KSO 200 F with Veneer Sanding Attachment The sanding unit is tiltable up to 45° via a lever. The machine frame, constructed from welded steel, ensures high torsional rigidity and vibration-free operation. Oscillating sanding belt with a separate gear motor for improved sanding results. Oscillation can be optionally switched on or off. Sanding shoe equipped with graphite lining for increased belt life. Height-adjustable sanding table to utilize the full width of the sanding belt. Height-adjustable auxiliary table with extraction for sanding radii. Spring-loaded belt tensioning automatically compensates for differences in belt length. Equipped with dual extraction ports. Extendable roller table extension. Rubber-coated sanding drum. Veneer edge sanding attachment with contact shoe featuring fine adjustment, pressure relief rollers, and stop rulers. Infeed ruler with grooves for veneer overhangs. Quick changeover from veneer edge to solid wood sanding. Dimensions and Weights Length: approx. 1900 mm Width/Depth: approx. 900 mm Height: approx. 1350 mm Weight: approx. 290 kg Dust Extraction Connection Extraction port diameter: 140 / 100 mm Drive Power Psdpfxoy Iu N As Altspw Oscillation motor: 0.25 kW Work Table(s) Work table length: 960 mm Work table width: 350 mm Work table height adjustment: 230 mm Min. height: 735 mm Max. height: 965 mm Longitudinal table height adjustment: 230 mm Cross table length: 330 mm Cross table width: 330 mm Cross table min. height: 720 mm Cross table max. height: 900 mm Cross table height adjustment: 180 mm Electrical Data Main drive motor: 3.0 kW Connection voltage: 400 V Sanding Unit Sanding belt length: 3000 mm Sanding belt width: 200 mm Belt speed: 20 m/s Sanding surface length: 1050 mm Sanding surface width: 200 mm Oscillation stroke: 20 mm Location: Ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2024, Holzkraft Edge Sanding Machine Model: KSO 200 F with Veneer Sanding Attachment The sanding unit is tiltable up to 45° via a lever. The machine frame, constructed from welded steel, ensures high torsional rigidity and vibration-free operation. Oscillating sanding belt with a separate gear motor for improved sanding results. Oscillation can be optionally switched on or off. Sanding shoe equipped with graphite lining for increased belt life. Height-adjustable sanding table to utilize the full width of the sanding belt. Height-adjustable auxiliary table with extraction for sanding radii. Spring-loaded belt tensioning automatically compensates for differences in belt length. Equipped with dual extraction ports. Extendable roller table extension. Rubber-coated sanding drum. Veneer edge sanding attachment with contact shoe featuring fine adjustment, pressure relief rollers, and stop rulers. Infeed ruler with grooves for veneer overhangs. Quick changeover from veneer edge to solid wood sanding. Dimensions and Weights Length: approx. 1900 mm Ppodpelht H Nofx Altjw Width/Depth: approx. 900 mm Height: approx. 1350 mm Weight: approx. 290 kg Dust Extraction Connection Extraction port diameter: 140 / 100 mm Drive Power Oscillation motor: 0.25 kW Work Table(s) Work table length: 960 mm Work table width: 350 mm Work table height adjustment: 230 mm Min. height: 735 mm Max. height: 965 mm Longitudinal table height adjustment: 230 mm Cross table length: 330 mm Cross table width: 330 mm Cross table min. height: 720 mm Cross table max. height: 900 mm Cross table height adjustment: 180 mm Electrical Data Main drive motor: 3.0 kW Connection voltage: 400 V Sanding Unit Sanding belt length: 3000 mm Sanding belt width: 200 mm Belt speed: 20 m/s Sanding surface length: 1050 mm Sanding surface width: 200 mm Oscillation stroke: 20 mm Location: Ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Edge sanding machine with top-mounted feed unit What sets the Uniq-S apart from the Uniq is its integrated feed system in the machine table, featuring a rubberized feed belt and a top pressure beam. This significantly facilitates the sanding and production of beveled and chamfered edges, as well as the serial sanding of workpieces. It is also particularly helpful when processing exceptionally large or small parts. The feed speed is infinitely adjustable between 3 and 15 m/min. A soft conveyor belt underneath and rubberized rollers on the upper pressure beam gently convey the material. Optionally, a second, bottom conveyor belt is available. The top pressure rollers can also be replaced by a rubber belt, which is especially helpful when sanding extremely small parts. The Uniq-S is recommended as an all-rounder, capable of performing all operations – from solid wood to fine veneer edges – at a high level of quality. The continuously adjustable feed speed allows for optimal adaptation to the material being processed. Pjdpfxshqb Rcs Altspw 1. Sanding station: "Veneer side" 2. Sanding station: "Solid wood side" 3. Sanding station: "Auxiliary table" 4. Sanding station: "Semicircular table" Location: In stock at 54634 Bitburg - Immediately available -