Servo Večkratni Ojačevalnik 1 Kos nakup rabljenega (82.037)

Stanje: pripravljen za uporabo (rabljen), Fanuc A06B-6096-H103 servo ojačevalni modul, serijska številka po fotografiji, strokovno popolnoma obnovljen in preizkušen z 12-mesečno garancijo, 100% delujoč, obseg dobave po fotografijah. Ijdsi D Uxpepfx Agteat

Stanje: pripravljen za uporabo (rabljen), Fanuc A06B-6114-H210 servo ojačevalni modul Različica: D SN:V02472360, rabljen, običajni znaki uporabe, 100% delujoč, obseg dobave skladno s fotografijami. Iasdji D Uy Aspfx Agtst

Stanje: pripravljen za uporabo (rabljen), Fanuc A06B-6290-H124 servo ojačevalnik verzija A, serijska številka: V17X64204, manjša poškodba ohišja (glej fotografijo), rabljeno, običajni znaki uporabe, 100% delujoč, dobava v skladu s fotografijami. Iedpfsi D Uzvsx Agteat

Stanje: pripravljen za uporabo (rabljen), Bosch SM 4.7/20-G16 servo krmilni modul 1070917161, serijska številka po fotografiji, rabljen, z manjšimi sledmi uporabe, 100 % delujoč, obseg dobave po fotografijah. Iodpfxji D Ufhs Agtsat

Stanje: rabljeno, prevoženi kilometri: 55.341 km, moč: 124 kW (168,59 KM), prva registracija: 08/1990, skupna masa: 7.490 kg, vrsta goriva: dizel, barva: oranžna, vrsta prenosa: mehanski, širina tovornega prostora: 2.430 mm, dolžina tovornega prostora: 3.000 mm, višina nakladalnega prostora: 1.600 mm, Leto izdelave: 1990, skupna dolžina: 7.700 mm, skupna širina: 2.480 mm, skupna višina: 3.000 mm, število sedežev: 9, Oprema: parkirni grelec, pogon na vsa štiri kolesa, Good condition and fully functional with no need for repairs. Iaedpfoy I Huwex Agtst +++ Vehicle is ready to drive ++ Power steering ++ 7.5t possible with historic certification +++ Recent inspection with brake fluid change, greasing, and replacement of fuel filters. Additionally, the air dryer cartridge and wiper blades have been renewed. Both starter batteries replaced, and all fluid levels of the aggregates have been checked and topped up if necessary. The front pump has been removed, and the openings in the radiator grille and bumper have been professionally sealed. This 1113 runs very well and is ready to go – ready for collection. 9 seats (with private registration as a truck, 6 seats possible), All-wheel drive 4x4, center and rear axle differential locks, towing ring (1.5t capacity) Transfer case with off-road reduction and differential locks, Walkable equipment box with device mounts, Wheelbase (axle distance): 4200 mm +++ Vmax according to documents: 85 km/h, actual (GPS): 88 km/h Cabin internal dimensions behind driver's seat LxWxH in mm: 1560 x 2180 x 1460 Box external dimensions LxWxH in mm: 3130 x 2400 x 1500 Box internal dimensions LxWxH in mm: 3050 x 2400 x 1450 - Subject to changes, prior sale, and errors -

Stanje: rabljeno, Power steering / power steering housing Iedpfey R Nt Isx Agteat comes from MAN TGL 12.220 Euro5 Cevoman bvba. Lenskensdijk 5 2200 Herentals Belgium

Stanje: zelo dobro (rabljeno), A06B-6105-H002 6-OSNI SERVO RAZVOJ GSG ROBOTICS Podjetje GSG Robotics GmbH, ustanovljeno leta 2005 v Güterslohu, ima od leta 2015 sedež v Marl-u, kjer nudi obsežno servisno območje za vzdrževanje in popravilo robotov. Skozi leta smo se razvili v celostnega partnerja na vseh področjih industrijskih robotov in avtomatizacijske tehnologije. Smo ponudnik celovitih storitev za dva priznana proizvajalca robotov: ABB in Fanuc. Iaedpfx Agexq Tu Tetet

Stanje: novo, Leto izdelave: 2026, Cormak press brakes are advanced machines that enable precise sheet metal bending thanks to appropriately selected punches and dies. Our range includes models equipped with DELEM DA-53TX controllers as standard, and optionally with DELEM DA53T, DA-58T, DA-66T, DA69T, and CYBELEC 12 controllers, which provide a wide array of functions for tackling the most demanding bending tasks. Main Features: - Front Supports: 2 pieces on linear guides, ensuring stability during bending operations - Y1, Y2 axis adjustment: automatic - Backgauge adjustment (X axis): servo driven with encoders - R axis adjustment: servo driven with encoders - Automatic crowning adjustment - Dual-sided punch clamping: AMADA quick-change type for rapid tool changes Technical Specifications - Maximum bent sheet thickness (S235): up to 6.0 mm - Nominal pressing force: 1700 kN - Maximum bending length: 3200 mm - Throat depth: 320 mm - Maximum ram stroke: 120 mm Ijdouw Scdepfx Agteat - Maximum open height: 390 mm - Distance between frames: 2700 mm - Maximum backgauge travel: 600 mm - Motor power: 9.5 kW - Length: 3870 mm - Width: 1550 mm - Height: 2460 mm - Weight: 7400 kg Additional equipment and models with different pressing force are available. Please contact the seller for more information.

Stanje: novo, Leto izdelave: 2026, Cormak press brakes are advanced machines designed for precise sheet metal bending, thanks to carefully selected punches and dies. Our range includes models equipped with DELEM DA-53TX controllers as standard, with optional controllers including DELEM DA53T, DA-58T, DA-66T, DA69T, and CYBELEC 12. These systems offer a wide range of functions to tackle even the most demanding bending applications. Main Features: Front supports: 2 pieces on linear guides, ensuring stability during the bending process Y1, Y2 axis control: automatic Iasdeuw Ri Aopfx Agtst Backgauge (X axis) adjustment: servo drive with encoders R axis adjustment: servo drive with encoders Automatic crowning adjustment Double-sided punch clamping: quick AMADA-type system, enabling fast tool changes Technical Specifications Max. Bending thickness (S235): up to 6.0 mm Nominal force: 1300 kN Max. bending length: 3200 mm Throat depth: 320 mm Max. ram stroke: 120 mm Max. open height: 390 mm Distance between frames: 2700 mm Backgauge travel: 600 mm Motor power: 9.5 kW Length: 3870 mm Width: 1550 mm Height: 2460 mm Weight: 7400 kg Optional equipment available. Please contact the seller for details.

Stanje: novo, Leto izdelave: 2026, The fully automatic aluminium circular saw UK 350 A 90° CNC + drilling unit (cutting angle 90°) has been specifically developed for cutting profile and solid materials made of aluminium castings, copper, and hard plastics. An automatic material feed as well as automatic cutting motion make it ideal for fast and precise series production! Material feed is up to 700 mm per stroke. Multiple strokes for longer sections can be conveniently programmed from the control panel. The main vice clamps the material using two horizontal and two vertical clamping cylinders; the feed vice uses one horizontal and one vertical clamping cylinder. Cutting and feed speeds are adjustable according to the material being processed via the large, clearly laid out control panel. The machine features a mechanical stroke height adjustment, with a maximum cutting height of 100 mm. A large protective hood covers the entire working area and is pneumatically lifted at the push of a button. The standard configuration for the UK 350 A 90° CNC + drilling unit includes an air blow gun for cleaning the machine. Connections for chip extraction systems are provided. This machine is equipped with the TR 14 vertical drilling unit (drilling capacity up to ø 14 mm, thread M12), which is integrated into the cycle control of the aluminium circular saw. Equipment: • Machine for 90° cuts, with powerful drive motor • CNC control; input of quantity and section length conveniently via the large, user-friendly control panel • Storage for up to 20 cutting programs • Servo-driven feed; single stroke feed up to 700 mm (for longer sections, the feed is automatically repeated up to the desired length) • Main vice with 4 pneumatic clamping cylinders – 2 horizontal, 2 vertical • Feed vice with pneumatic horizontal and vertical clamping cylinders Iajdokqz H Depfx Agtst • Large protective hood, covers the entire working area, pneumatically lifted • Variable adjustment of cutting and feed speed • Maximum cutting height 100 mm • Air blow gun for machine cleaning • Connections for extraction system • Saw blade ø 350 mm • TR 14, fixed automatic drilling unit with tool holder • Spindle speed, drilling depth, etc. are set via the machine control; drilling cycle is automatic Technical Data: Drive power: 1.9 kW / 400 V / 50 Hz Speed: 3000 rpm Blade size: 350 x 32 mm Material feed per stroke: 700 mm Max. cutting height: 100 mm Dimensions: 1400 x 850 x 970 mm Optional loading magazine available! We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 1.600 mm, skupna višina: 1.600 mm, skupna širina: 1.000 mm, skupna masa: 1.500 kg, vhodna napetost: 400 V, Metal Technics Polska Profesionalni CNC stroji, laserji in naprave za obdelavo kovin Smo proizvajalec in uvoznik visokokakovostnih strojev za obdelavo kovin. Dobavljamo preverjeno tehnologijo iz Poljske, Evrope in Azije. Že 15 let stavimo na kakovost, natančnost in zanesljivost. HIDRAVLIČNA UPUGALKA 1320x40 MM Upravljanje na dotik + SERVO Stroj je namenjen upogibanju pločevine. Tehnični podatki: Nazivna sila: 400 kN (40 ton) Delovna dolžina: 1320 mm Razdalja med stojali: 900 mm Izpust: 180 mm Hod: 100 mm Odpiranje: 290 mm Zadnji prislon: 500 mm Hitrost: do 80 mm/s Iaodpfx Agsyr N E Ejtet Upravljalnik MTP 3212: Zaslon na dotik Samodejni izračun kota Shranjevanje programov Varnost: Stranska zaščita Svetlobne zavese Zadnje varnostno območje Možnost dostave – transport se izračuna individualno.

Stanje: rabljeno, prevoženi kilometri: 153.000 km, moč: 70 kW (95,17 KM), prva registracija: 12/1992, skupna masa: 3.200 kg, vrsta goriva: dizel, barva: rdeča, naslednji pregled (TÜV): 12/2025, vrsta prenosa: mehanski, Leto izdelave: 1992, skupna dolžina: 5.345 mm, skupna širina: 1.975 mm, skupna višina: 2.680 mm, število sedežev: 9, Oprema: je imel nesrečo, parkirni grelec, Original German vehicle. In service with a small municipality until 2026, initially with the fire department and then with the municipal services department. This vehicle has a civilian truck registration as a "closed box truck" and is registered with a full 9 seats in the documents. The vehicle was used as a Multi-Purpose Vehicle (MZF), after which it was used to transport the municipality’s lawn mower. Only one bench seat is permanently installed. Two of the three bench seats were not needed in recent years and are included as loose items. The original seat belts and mounting bolts are also included. A folding table with a radio handset is still mounted on the left side, and a large original fire brigade first-aid kit is integrated into the interior. Engine: OM 602, 5-cylinder naturally aspirated diesel with 2874 cc. The engine always starts absolutely perfectly and initially runs smoothly; however, after about 20 seconds at idle speed, the idle quality drops significantly and smoke is produced. Once the engine is up to operating temperature, the smoke subsides and the engine runs cleanly again, almost as normal. The engine is either heavily worn or has suffered engine damage. No precise diagnosis has been made yet. The vehicle drives immediately and functions superbly; full, normal engine power was available during a brief test drive. However, we do NOT guarantee roadworthiness. An urgent repair is certainly necessary! For driving short distances or boarding a RORO ship to Africa under its own power, this 310 D seems completely unproblematic. 5-speed manual transmission. 127 km/h top speed. Tow hitch (ball head) with 2,000 kg towing capacity braked, or 750 kg unbraked. Power steering. Original Mercedes/Eberspächer auxiliary heater (operational). The body has some rust spots; overall, due to years of garage storage, it is still comparatively well preserved. The passenger door window is damaged and covered with film. The lower part of the body has been touched up in black paint. Apparently, the vehicle was always very well maintained by the fire brigade—unfortunately, not so after that! When opening the sliding door, a large step automatically extends mechanically. Iasdpjyx N Hqsfx Agtst Unladen weight: 2,370 kg. Gross vehicle weight: 3,200 kg. Overall external vehicle dimensions: Length 5,345 mm / Width 1,975 mm / Height 2,680 mm. Tyres (205R14C) are from 2013 and not porous, approx. 50–60% tread depth remaining. The vehicle is preferably intended for export or for true fans of the Bremen van looking for an unvarnished base for restoration. TÜV expired 12/2025, will not be renewed. We do not have our own workshop. We have deliberately set an attractive price, as truly good comparable vehicles are now usually traded at twice the price or even higher. Given the defects, a personal inspection is highly recommended and can be arranged by appointment. This offer is valid only for commercial customers, freelancers, and public safety authorities. Unfortunately, sales to private consumers are strictly excluded. Subject to prior sale and errors at any time. The purchase price is gross=net with no VAT due (in accordance with §25a UStG / margin scheme).

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €98,300 Leasing rate: €1,857.87 Pressing force: 135 tons Bending length: 3050 mm Axes: Y1 / Y2 / X and R axis Stroke: 265 mm Distance between uprights: 2600 mm Isdjwirr Rjpfx Agtjat Side frame depth: 410 mm Installation height: 530 mm Drive concept: Hydraulic Rapid traverse Y-axis: 200 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 200 mm/s Backgauge X-axis travel: 650 mm Backgauge X-axis speed: 500 mm/s Backgauge R-axis travel: 250 mm Table height: 900 mm Table width: 104 mm Motor power: 2x4 kW Length: 4200 mm Width: 1680 mm Height: 2750 mm Weight: 9500 kg ONE SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2, X, and R) CNC CONTROL SKY 22 - Full HD graphical display 21.5" with 2D and 3D representation of the programmed workpiece - Intuitive touchscreen operation (simple drawing of bending contours by finger) - Operator-friendly dialogue programming, selectable in 2D or 3D mode - 2D and 3D simulation of the bending sequence - Automatic tool selection in 3D mode - Automatic calculation of flat length for sheet blank - Automatic bending sequence calculation - Graphical product and tool memory - Correction capability - USB ports and Ethernet connection for import, backup, and program outsourcing - Windows operating system - Import support for IGES, STEP, DXF files Servo-driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Top tool 1010/A/75°, segmented and offset 4-V die block 60x60 2009 (V=16, 22, 35, and 50 mm) Laser safety device Fiessler AKAS mounted on upper beam Sheet support arms on linear guides Equipment according to CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Hydraulics operate only during upper beam movement - Low energy consumption - Low noise generation - High speed Options: Z1/Z2 axes CNC control Delem DA-66 S CNC control DELEM DA-69S 3D incl. PC software Profile-S with possibility to import 3D files Quick-clamping levers for top tool

Stanje: rabljeno, prevoženi kilometri: 493.685 km, moč: 300 kW (407,89 KM), prva registracija: 02/2009, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, barva: rdeča, vrsta prenosa: samodejen, emisijski razred: Euro 5, Oprema: klimatska naprava, * Klimatska naprava * Radio * Pomoč pri speljevanju v klanec * Listno/zračno vzmetenje * Tempomat Iaedpfjyxcxgex Agtot * 1. nadstropje Köstner nadgradnje za prevoz živine * Nakladalna površina 17,0 m² * Višina tovornega prostora: 210 cm * 40mm vlečna kljuka Ringfeder * Lastna teža: 9.870 kg -----Interna številka vozila: 10863----Pridržujemo si pravico do napak in vmesne prodaje. Podpora prek WhatsApp na voljo! Za vprašanja o vozilu ali boljše informacije nam pišite preko WhatsApp Whatsapp Whatsapp

Stanje: novo, x-travel 1000 mm y-travel 360 mm z-travel 400 mm Spindle taper ISO 40 ISO Table: 1370 x 300 mm Feed rate: 30–830 / 23–625 mm/min Spindle speed: 45–1660 rpm Spindle-to-table distance: 60–460 mm Rapid traverse Z-axis: 750 mm/min Overhang: 95–575 mm Total power requirement: 3.0 kW Machine weight approx. 1505 kg Dimensions (L x W x H): 1740 x 1860 x 1900 mm The universal milling machine UWF 110 Servo is suitable for performing light to medium milling operations. Thanks to its great versatility and simple retooling, it can be efficiently used in workshops for machining small to medium-sized production runs. Special features of this machine include the swiveling worktable, flat guides in the Y and Z axes, and servo drive for feeds and rapid traverse in all axes. - Large-dimension rectangular guides on Y and Z axes ensure increased stability - 8x automatic feeds and rapid traverse in all axes - Driven by servomotor - Universal milling head "Huron" system, adjustable to any angular position - Swiveling control panel with ergonomically positioned switches - Heavy machine base made of cast iron for vibration-free operation - High running smoothness thanks to ground, oil-bath lubricated gear wheels - Overarm with clearly arranged shift gearbox for spindle speed - Digital position display for X, Y, and Z axes included - Precision surface-ground cross table with T-slots Scope of supply - 3-axis digital readout ES-12 H with LCD display - Drawbar M16 - LED machine lamp - Feed drive for X, Y, and Z axes - Coolant system - Counter bearing - Long milling arbor ISO 40 / 27 mm - Combination stub milling arbor ISO 40 / 27 mm - Coolant tray Iodpfexaak Tsx Agtoat - Adjustable safety guard - Central lubrication for X, Y, and Z axes - Operating tools

Stanje: pripravljen za uporabo (rabljen), Linearni robot, Hahn Automation Propicker PP 1.5A, rabljeni stroj Ijdoxh Dtnjpfx Agtoat Proizvajalec: Hahn Tip: Servo Picker sp 1.5A Dimenzije: 640 × 300 × 1400 mm Leto: 2010 Električni podatki: 240 V; 80 VA

Stanje: novo, Bernardo Universal Milling Machine UWF 110 Servo -1000 Technical Specifications Table Size: 1370 x 300 mm Spindle Mount: ISO 40 mm Spindle Speed: (11 steps) 45 - 1660 rpm Travel, longitudinal (x): 1000 mm Travel, cross (y): 360 mm Travel, vertical (z): 400 mm Distance Spindle/Table: 60 - 460 mm Arm Reach: 95 - 575 mm Tilting Table: -45° to +45° Max. Workpiece Weight: 250 kg Feed Rate, longitudinal/cross: (8 steps) 30 - 830 mm/min Feed Rate, vertical: (8 steps) 23 - 625 mm/min Rapid Traverse (x, y, and z axis): 1000 / 1000 / 750 mm/min T-Slots (Number / Width / Spacing): 3 / 14 mm / 80 mm Main Motor: 3.0 kW Servo Motor (Torque / Power): 10 Nm / 1.5 kW Coolant Pump Power: 60 W Coolant Pump Flow Rate: 12 l/min Machine Dimensions (W x D x H): 1740 x 1860 x 1900 mm Weight approx.: 1505 kg Scope of Delivery • 3-axis digital readout ES-12 H with LCD display • Drawbar M16 • LED machine lamp • Power feed for x, y, and z axes • Coolant system • Counter bearing • Long milling arbor ISO 40 / 27 mm Isdpfx Agsg Hzbxetjat • Combination stub arbor ISO 40 / 27 mm • Coolant tray • Adjustable safety guard • Central lubrication for x, y, and z axes • Operating tools

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Bograma BSM 750/220/15 Servo izsekovalna linija, leto izdelave 2004 Bograma BSM 750/220/15 Servo, leto izdelave 2004 Podajalnik pol Bograma TA 15, leto izdelave 2004 Izložni trak v stopničastem nizu Bograma SAB 750, leto izdelave 2004 Iajdpeygr I Sofx Agtet

Stanje: rabljeno, B&R Acopos 1090 Servo Drive 8V1 removed from Engel Robot ERC-6510-E - Removed from an operational machine - Fully functional Manufacturer: B&R Iodpfoiyzwwjx Agtoat Model: 8V1090 Manufacturer No.: 8V1 Spare part No.: Please ensure before purchasing that the Acopos you require also has a 12-pin green connector. If the spare part is traded on an exchange basis, a partial credit will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse credit based on the condition or age of the returned part. The defective part must be in repairable condition; credit will be issued upon feedback from the manufacturer. Condition: used

Stanje: rabljeno, B&R / 8V1 Acopos 1022 servo amplifier – refurbished - 3-month warranty: This is provided exclusively based on manufacturer inspection. Processing is carried out by Complast GmbH. - Removed from an operational machine - Fully functional Iaedpfx Agjp Rb Iajtet Manufacturer: B&R Type: 1022 Manufacturer No.: 8V1 Please ensure before purchasing that the Acopos you require also has a 12-pin green connector. If the spare part is traded on an exchange basis, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note based on the condition and/or age of the returned part. The defective part must be in repairable condition; the credit note will be issued after confirmation from the manufacturer. Condition: refurbished

Stanje: novo, Condition: New Press force: 175 tons Bending length: 3050 mm Axes: Y1 / Y2 and X axis Control system: Durma Sky 22 Rapid traverse (Y axis): 200 mm/s Stroke: 265 mm Distance between uprights: 2600 mm Throat depth (side frame): 450 mm Installation height: 530 mm Drive concept: Servo-hydraulic, up to 72% energy savings Working speed (Y axis): 10 mm/s Return speed (Y axis): 500 mm/s Backgauge travel (X axis): 650 mm Backgauge speed (X axis): 500 mm/s Backgauge speed (R axis): 350 mm/s Backgauge travel (R axis): 250 mm Table height: 900 mm Table width: 104 mm Motor power: 15 kW Length: 4250 mm Width: 1700 mm Height: 2890 mm Isdpfxoh H Dnbs Agteat Weight: 10,900 kg 3 axes (Y1, Y2, X) CNC CONTROL DT-15 - 15" 2D graphical display - Intuitive touchscreen operation (easy drawing of the bending contour with your finger) - Direct programming of the bending angle - User-friendly dialog programming - Graphical simulation of the bending process - Automatic calculation of the developed length for sheet metal blanking - Graphical product and tool library - Correction function - Manual, semi-automatic and fully automatic operating modes - Tonnage calculation/programming via CNC - Internal data storage - USB ports for backup and program export Servo-motor-driven backgauge on linear guides and ball screw spindles Backgauge finger blocks on double linear guides CNC-controlled crowning Adapter pieces for top tool clamping Die holder for 60 mm dies Fiessler AKAS laser safety system mounted on upper beam Sheet support arms on linear guides Side and rear safety guards Equipment according to CE regulations Operating manual in GERMAN and ENGLISH (Symbolic image) Various options and equipment configurations available.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, A complete can feeding, counting, and closing line including labeling and cartoning is available. 1) Can Feeder IMA Swiftpack UN 800S, year of manufacture: 2007, output: 60 cans/min, formats (diameter/height): 45mm/51.5mm, 45mm/84mm, 45mm/96mm, 60mm/80mm, 60mm/122mm. 2) Counting Machine Cremer CF 1220, year of manufacture: 2002, counting speed: 1000 products/min, counting heads: 1, channels: 12, formats: capsules (HGK & WGK) and tablets (round & oblong), including one spare cylinder for storage flaps. 3) 2x Rotary Tables Höflinger & Karg S1, table diameter: 1000mm. 4) Cap Closing Machine (Screw Capper) CBV Servo, year of manufacture: 2019, closing speed: 40 closures/min, cap diameter range: 23mm-100mm. 5) Cap Closing Machine (Crimp Capper) Rudolf Deckert AVM 738, year of manufacture: 2003, closing speed: 50 cans/min, can diameters: 45mm/60mm, cap formats (diameter/height): 42.4mm/17.15mm, 50mm/12mm. 6) Can and Bottle Labeler IMA Sensitive 350, year of manufacture: 2009, labeling capacity: 350 units/min, can and bottle diameter range: 15mm-78mm, max. product height: 220mm, label length range: 15mm-220mm, label height range: 10mm-140mm, equipped with hot printer Allen Coding Set S-Compact 50/30 and camera Keyence IV 500 CA. 7) Can and Bottle Cartoner Uhlmann C100, year of manufacture: 1988, cartoning speed: 70 cans/min, max. can/bottle diameter and height: 60mm/120mm, carton length range: 30mm-113mm, carton width range: 15mm-85mm, carton height range: 70mm-130mm. The machine was converted in 2017 for cans and bottles and equipped with a Mitsubishi D700-SC control, including GUK Cartonac 91 folding unit, 3x code readers and luminescence control. 8) Coding and Inspection System Wipotec TQS-HC-A for serialization, tamper evident, and weighing, year of manufacture: 2017, inspection speed: 300 products/min, including 2x label dispensers Herma 400, double print head (2 cartridges), camera for print inspection, weighing cell with weigh belt, and hand scanner. 9) Bundler (Tight Bundler) Christ FilmTeq 3030, year of manufacture: 2011, infeed: 50-200 cartons/min, outfeed: 7-50 bundles/min, carton length range: 15mm-400mm, carton width range: 15mm-90mm, carton height range: 60mm-150mm, bundle length range: 60mm-400mm, bundle width range: 60mm-150mm, band height range: 30mm-230mm. Documentation available. An on-site inspection is possible. Ijdpfewa Tixox Agteat

Stanje: rabljeno, prevoženi kilometri: 60.000 km, moč: 124 kW (168,59 KM), prva registracija: 12/1974, skupna masa: 11.000 kg, vrsta goriva: dizel, barva: rdeča, konfiguracija osi: 2 osi, naslednji pregled (TÜV): 12/2026, vrsta prenosa: mehanski, širina tovornega prostora: 2.450 mm, dolžina tovornega prostora: 4.680 mm, višina nakladalnega prostora: 1.450 mm, Leto izdelave: 1974, skupna širina: 2.470 mm, skupna višina: 3.050 mm, Oprema: pogon na vsa štiri kolesa, 1st hand. German fire-fighting vehicle with valid general inspection (HU) and safety inspection (SP) until 12/2026. Regularly registered until 18/02/2026. For the past 30 years (after its regular service period), only used as an enthusiast's vehicle and stored indoors; regularly serviced, driven, and meticulously maintained by the fire department. Temporarily transferred to the local airport in the meantime. Bachert superstructure, mixed aluminium-steel construction, built extremely robust for longevity and crafted with attention to detail. All the heavy-duty shutters and flaps still operate flawlessly. The 1113 starts immediately and is ready to drive. Good original condition. Signs of use from over 50 years of fire service are present. No serious defects or significant rust damage visible on the vehicle. Overall, a well-kept classic round-hooded cab. LAF 1113 B with 3 windscreen wipers. Power steering. Engine: OM 352 A 6-cylinder diesel with turbocharger, approximately 170 HP. 85 km/h is registered as the maximum speed on the documents. 5-speed manual gearbox. PTO (power take-off). Hydraulic system for auxiliary units. Selectable all-wheel drive 4x4. Wheelbase: 4,200 mm. 3 seats. Large Rockinger towing hitch with air connections and 10,000 kg braked towing capacity. Maximum unbraked towing weight is 1,500 kg. Rescue vehicle body (RW2) with winch, power generator, and light mast. Cable winch: Rotzler 5 ton, with 65 m steel cable. Power generator: Knurz-Kirsch 20s, output 20 kVA. Light mast at the rear left, hydraulically extendable. Roof accessible via rear ladder, equipped with aluminium tread plate and 2 large storage boxes. Overall vehicle dimensions: 7,300 mm length / 2,470 mm width / 3,050 mm height. Box body dimensions (measured externally) approx.: 4,680 mm length / 2,450 mm width / 1,450 mm height. Tyres: 8.25 20/14 PR, apparently without DOT number, not cracked and in good condition. Type of registration for the 1113 was previously "Other vehicle – fire-fighting vehicle, rescue vehicle". Battery charging socket and manual battery master switch located on the driver’s seat console. Iodpfx Asyndg Nogtsat The odometer was replaced in 2018 and now displays 141,000 km. The original odometer, showing 27,000 km, was retained and correctly handed over to us by the fire department. The actual total mileage is at most 60,000 km, likely significantly less. As the inspection logbook with recorded mileage has been consistently filled in over the past 25 years, both the mileage and the odometer replacement can be reliably and continuously verified during this period. In addition to the original odometer, there is a box full of original documentation from Daimler-Benz and Bachert, including documents such as inspection logbooks and generator manuals, most of which are original documents from the vehicle’s production year 1974. Everything is in good and well-preserved condition. These documents are not available for separate purchase and will not be photocopied; please accept these facts as stated. Only the purchaser of the 1113 will receive these valuable items together with the vehicle. This offer is valid only for businesses, freelancers, public authorities, emergency services (BOS), and similar economically self-employed professionals. Sale to private end-users is unfortunately not possible. Interim sale and errors reserved at all times. Net price: €18,900!

Stanje: novo, Leto izdelave: 2026, Machine Description • Automatic feeds in the X, Y, and Z axes ensure precise material machining in three dimensions. • Rapid traverse in all axes and stepless feed rates enable efficient operation for a wide range of tasks. • Digital display and user-friendly Schneider Electric control panel guarantee intuitive management of the machining process. Technical Specifications TABLE DIMENSIONS: 1600 x 360 mm MAX. TABLE TRAVEL (X/Y/Z): 1300 x 300 x 420 mm T-SLOTS (NUMBER/WIDTH/DISTANCE): 3 / 14 mm / 95 mm MAX. TABLE SWIVEL ANGLE: ±45° TABLE FEED RATE: X/Y: 25~800 mm/min Z: 8–267 mm/min SPINDLE TAPER (VERTICAL/HORIZONTAL): 7:24 ISO 50 / 7:24 ISO 50 DISTANCE FROM TABLE CENTER TO COLUMN FACE: 230–530 mm SPINDLE TO TABLE DISTANCE: 0–420 mm DISTANCE FROM VERTICAL SPINDLE NOSE TO TABLE SURFACE: 150–570 mm SPINDLE SPEED (VERTICAL/HORIZONTAL): (12) 60–1750 / (12) 58–1800 rpm HORIZONTAL SPINDLE MOTOR POWER: 5.5 kW VERTICAL SPINDLE MOTOR POWER: 4.5 kW TABLE FEED SERVO DRIVE: 2.36 kW / 15 Nm MACHINE DIMENSIONS: 2550 x 2161 x 2102 mm WEIGHT: 2885 kg Iajdpfeg Nghtox Agtst Additional Equipment: • 3-Axis Digital Readout (DRO) • SERVO DRIVE • Long arbor ISO 50/27 mm / ISO 50/32 mm • Reduction ISO 50 / MT4 • ISO 50 arbor with ER32 collets 4, 6, 8, 12, 16, 18, 20, 26 • Work light • Coolant system • Central lubrication system • Table feeds for X, Y, Z axes • Full set of service tools • EC Declaration of Conformity • OPERATING MANUAL Our UWF 150S SERVO milling machine with a swiveling table is the ideal solution for demanding machining tasks, offering reliability, precision, and performance. Discover new possibilities in industry with our advanced technologies and robust design.

Stanje: pripravljen za uporabo (rabljen), Fanuc A06B-0146-B077 AC servomotor, serijska številka: C988A7708 / 3,0 kW 100 Hz, hitrost 1500 obr./min, rabljen, dobro ohranjen, 100 % delujoč, obseg dobave kot na slikah. Iedpfx Aex Ncalsgtsat