Sac Sac Fs 430.S Skobeljni Stroj In Skobeljni Stroj nakup rabljenega (135.151)

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SNDE106744, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Vacuum casting system was used to pot epoxy resin into plastic housings. Lodpfx Aaovnrz Demorp

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, PRODAJA SAMO ZNOTRAJ NEMČIJE IN AVSTRIJE!!! Ulma FM 305 Avtomatski stroj za pakiranje v cevne vrečke ULMA FM 305 je bil posebej zasnovan za pakiranje svežih izdelkov v večplastne folije v zaščitni atmosferi (MAP). Ta stroj izdeluje hermetično zaprte "pillow-pack" cevne vrečke v obliki blazine. Tehnične specifikacije Model: FM 305 Stanje: Razstavni stroj (popolnoma funkcionalen) Letnik: 2023 Zmogljivost: Do 70 pakiranj/minuto (odvisno od folije in lastnosti izdelka) z uporabo tehnike MAP. Vrsta pakiranja: Cevne vrečke Oprema stroja Dolžina transportnega traku: Prostor za vstavljanje 3000 mm Lastnosti opreme ✅ Motoriziran držalo za folijske zvitke (maks. širina folije 700 mm) ✅ Foto celica za potiskano folijo ❌ Razdelilnik etiket ❌ Tiskalnik Lrjdpfxozmvw No Aamsp ✅ Signal za tiskalnik/etiketirni stroj ❌ Dvojno držalo za folijske zvitke ✅ Motoriziran držalo za folijske zvitke (maks. širina folije 700 mm) ✅ Varilni element iz nerjavečega jekla z rezalnikom za evropsko luknjo ✅ Stisnejoča spužva za nadzor prostornine pakiranja ✅ Funkcija "Ni izdelka / Ni vrečke" ✅ Signali za sinhronizacijo s predhodnimi in naslednjimi napravami ✅ Analizator plinov Dannsensor MAP Check 3 O2, senzor za pline Dokumentacija in upravljanje Jezik (dokumentacija in uporabniški vmesnik): Nemščina (drugi jeziki na zahtevo) Dimenzije in teža Zunanje mere (D × Š × V): 6.150 × 1.180 × 1.960 mm Transportna teža: 1611 kg (vključno s transportno embalažo)

Stanje: rabljeno, Leto izdelave: 2005, Stiskalna sila: 220 kN Debelina pločevine: 8 mm Delovna površina: 2535 x 1280 mm Debelina pločevine pri nerjavnem jeklu: 4–6 mm Lodezk Rfispfx Aamjrp Število delovnih ur: 98.128 ur Povezava do videoposnetka na platformi YouTube: ?v=eyXEm2akvOE

Stanje: rabljeno, High-performance drilling machine ALZMETALL Type Abomat 20 Production drilling machine Serial No. 452 Year of manufacture: 1996 Drilling capacity in steel ST 60: 25 mm Drilling capacity in cast iron GG 20: 30 mm Spindle taper: SK 40 - M16 Throat: 280 mm Quill stroke: 500 mm Distance spindle nose to table: 185 - 685 mm Table size: 490 x 400 mm Spindle speed: 50 - 500 rpm, stepless Quill feed: 20 - 224 mm/min, stepless Rapid traverse (quill): 4.5 m/min Feed motor power: 0.18 kW Rapid traverse motor power: 0.75 kW Drill spindle motor power: 1.1 kW (speed 1000 rpm) Mains connection: 400 Volt, 50 Hz - Stepless spindle speed adjustment via frequency converter - Stepless quill feed via frequency converter - 2 operating modes: setup and automatic - Central lubrication Lredpsikrtqofx Aamjp - Control cabinet at the rear of the machine - Swivelling control panel - Mounted on steel plate (700 x 650 x 40 mm) with precise height adjustment Space requirement (L x W x H): 1200 x 700 x 2530 mm Weight: approx. 1000 kg Good condition

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, obratovalne ure: 30.430 h, Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 22 t, najv. debelina pločevine: 6 mm, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 1.250 mm, prebojni premer: 76 mm, TEHNIČNE PODROBNOSTI Tlačna sila: 220 kN Največja debelina pločevine: 6,4 mm Premer izseka: 76,2 mm Pomik X-os: 2.500 mm Pomik Y-os: 1.250 mm Pozicionirna hitrost X-os: 90 m/min Pozicionirna hitrost Y-os: 60 m/min Pozicionirna hitrost simulacije: 108 m/min Pozicionirna hitrost rotacijske osi: 360 °/s Teža obdelovanca: 150 kg Najmanjši programski pomik: 0,01 mm oz. 0,01° Orodne postaje: 15 kosov Čas menjave orodja: 1,5 - 6,5 s PODROBNOSTI STROJA Dimenzije: 6.400 x 5.800 x 2.100 mm Teža stroja pribl.: 11.050 kg Lsdpfjzk A Ntox Aamerp Obratovalne ure: 30.430 h

Stanje: novo, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 400 mm, pomik po osi Z: 600 mm, hitro pomikanje X-os: 30.000 m/min, hitri pomik os Y: 30.000 m/min, za racionalno in učinkovito obdelavo dolgih kosov, kot so nosilci, profili, cevi itd. • Maksimalne poti giba: Os X 4000 mm, obdelovalna dolžina Os Y 400 mm, obdelovalna dolžina Os Z 400 (600) mm • Maksimalna nosilnost 1000 kg • Moč pogona glavne vretene: 11 kW, asinhroni motor • Število vrtljajev glavne vretene: 8000 vrt/min • Nosilec orodja: SK 40 • Hitrost giba v načinu hitrega premika, os X: približno 30000 mm/min • Hitrost giba v načinu hitrega premika, os Y: približno 20000 mm/min • Zmogljivost vrtanja: ø 30 mm v materialu S355 • Rezanje navojev: M16 v materialu S355 • Servomotorji za ločen pogon osi Y in Z, opremljeni s krogličnim vijakom; os X z diagonalno ozobljenim in kaljenim zobniškim pogonom • Končni in referenčni stikali, brez stika • Zaščita pred preobremenitvijo vretene • Masivna, natančna križna miza, velike dimenzije • Zaščitna naprava, kombinirana z optično pregrado in/ali zaščitno ograjo Ljdpfx Aajznkipsmorp • Premer orodja: maks. 100 mm • Dolžina orodja: maks. 270 mm • Približna potrebna površina (D x Š x V): 6660 x 4500 x 3400 mm • Skupna teža: približno 5500 kg • Priključki na strani stranke: Priključna moč: 30 kW / 63 A • Stisnjen zrak: 6 – 8 bar • Krmilnik: Heidenhain TNC7vBasic • Glavni računalnik: MC 355 Touch z upravljalno ploščo in integriranim barvnim TFT-ploščatim zaslonom, 19 palcev - Menjalnik orodja, 24 mest - Sistem za minimalno mazanje - Notranje hlajenje vretene IKZ - Transportni sistem za odrezke, vključno s izmetnim lijakom - Heidenhain elektronsko ročno kolo - Heidenhain 3D tipalski sistem za merjenje obdelovanca - Heidenhain programska možnost za uvoz CAD podatkov - Heidenhain sistem za merjenje dolžine orodja - 4 kos. mehanično-hidravlične primeči MSH 150, razpon 300 mm - Sistem nihajnega delovanja (razdeljeno delovno območje) Cena na zahtevo.

Stanje: rabljeno, Univ. Swivel-Tilt-Rotary Table DECKEL Universal accessory milling table suitable for FP 2L, FP 3L, or FP 4L No. 2314 Year of manufacture: approx. 1975 Clamping surface: 1000 x 520 mm - 6 T-slots, 16 mm, spacing 90 mm - Clamping plate rotatable horizontally to the right and left up to 45 degrees, indexed Ljdpfxjd E A I Ns Aamjrp - Tiltable to/from the machine +/- 15 degrees - Swiveling +/- 15 degrees - Swivel table, tilt table, angle table Permissible load max. 1000 kg Weight: 400 kg Good condition

Stanje: rabljeno, CNC Milling Machine DECKEL Type FP 3 A Toolroom milling machine with handwheels, suitable for both CNC and manual operation Serial No. 2206 – Year of manufacture: 1982 CNC Contour Control GRUNDIG CNC 2101 Travel paths: X: 490 mm, Y: 300 mm, Z: 340 mm Table size: 705 x 425 mm Spindle taper: SK 40 Quill stroke: 100 mm Spindle speed: 25 – 2500 rpm, 21 steps Feed rate: 5 – 500 mm/min, stepless Rapid traverse speed: 1200 mm/min Spindle drive motor power: 2 / 4 kW, pole-changing Power supply: 380 Volt, 50 Hz Lredpfxjv R E Rds Aamjp - CNC contour control GRUNDIG CNC 2101 - Mechanical handwheels on all three axes - Universal swivel/tilt rotary table - Vertical milling head tiltable and manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system integrated in the machine base - Front and side protective enclosure with 3 folding doors - Free-standing control cabinet (L x W = 600 x 430 mm) Space requirement (L x W x H): 1900 x 1700 x 1950 mm Weight: 1700 kg (Machine 1540 kg + electrical cabinet 160 kg) Very good condition

Stanje: rabljeno, Protinastavek in adapter za rezkalni stroj za horizontalno rezkanje Protinastavek in adapter (kontradržalo) za rezkalni stroj DECKEL (Nosilni blok z lastovičjim vpenjalnim adapterjem DECEL FP1 + FP2) Tip 9570 Širina ozkega lastovičjega repa: ca. 72 mm Širina širokega lastovičjega repa: ca. 88 mm Ledpfxsxcbl Do Aamerp Višina lastovičjega repa: ca. 15 mm Dolžina (nosilni blok): 133 mm Širina (nosilni blok): 50 mm Skupna višina (nosilni blok): 105 mm Ležajna izvrtina: Ø 17 mm (z bronasto ležajno pušo) Razdalja osi izvrtine do nosilne površine lastovičjega repa: ca. 82,5 mm (višina konice) - Adapter, primeren za lastovičji rep in vpenjalno površino, povečanje za 22,5 mm na višino konice 105 mm Skupna dolžina (lastovičja letev): 635 mm Teža: 3,8 kg zelo dobro stanje

Stanje: rabljeno, CNC-frezalni stroj ABENE, tip VHF-360TI Številka izdelave: 36084, leto izdelave: 2008 CNC-nadzor HEIDENHAIN, TNC 320 Hodi: X: 650 mm, Y: 510 mm, Z: 450 mm Velikost mize: 1200 x 400 mm Vretenčna prijemka: SK 40 Število vrtljajev vretena: 55 – 3000 vrt/min, 2 stopnji Hitrost podajanja: 30 – 4000 mm/min, brezstopenjska Hitrost hitrega gibanja (osi X + Y): 4000 mm/min Lodpfxoty A Eho Aamjrp Hitrost hitrega gibanja (os Z): 2000 mm/min Razdalja med koncem vretena in mizo: 20–495 mm Moč motorja pogona vretena: 7,5 kW Priključna napetost: 400 V, 50 Hz - CNC-nadzor HEIDENHAIN TNC 320 z vmesniki RS232, USB in LAN - elektronski ročni krmilnik za osi X, Y in Z - mehanski ročni krmilniki za osi X in Y - hitrost vrtljajev vretena se ročno preklaplja med 2 prestavami (stopnja 1 = 55–700 vrt/min.) + (stopnja 2 = 701–3000 vrt/min.) - koncept naklonjene postelje z bočno nameščenim vrtljivim vretenčnim nosilcem +/- 50° - naklon postelje se ročno nastavlja s pomočjo ročice - hidromehanska vpenjalna naprava za orodje - avtomatsko centralno mazanje - sistem za hlajenje s priključenimi električnimi črpalkami za hladilno mazivo - luč za osvetlitev stroja - nadzorna omara fiksno nameščena na stroju - odčitane delovne ure pri vklopljenem nadzoru: 14780 ur - odčitane delovne ure pri vklopljenem stroju: 12980 ur - odčitane delovne ure pri teku programa: 400 ur Zasedeno prostorno: D x Š x V: 2600 x 2000 x 2000 mm Teža: 2500 kg V zelo dobrem stanju

Stanje: zelo dobro (rabljeno), Premer obdelovanca – maks. 400 mm Dolžina navoja 1000 mm Modul – maks. 4 (8) Modul – min. 1 Dolžina vpenjanja maks. 850 mm Lredpfx Aajzmapijmop Masa stroja približno 3,1 t Potreben prostor približno 3,1 x 1,1 x 1,6 m

Stanje: zelo dobro (rabljeno), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in one line) Edge Material (Rolls) Thickness (min/max) mm: 0.3 – 3 Panel Thickness (min/max) mm: 10 – 60 Working Width (min/max) mm: 240 – 2700 Control: PC Base Windows / Software SINITRA Feed Speed (adjustable) m/min: 10 – 40 (INVERTER C.N.) Cam Pitch (mm): 500 FORMATTING UNIT (for each side): Protective cutter (pre-milling) AS 10 (5.8 kW), pneumatic 2 x hogging units DT 10 (5.8 + 5.8 kW) Spray device (for liquid anti-adhesive) Lodpfxju Rc Anj Aamerp EDGE BANDING SECTION (for each side): 1st Gluing Unit (hot-melt adhesive + pre-melter) SP30 (High Melt + Edge Control EC 40) 2nd Gluing Unit (pre-melter with hot air) Air Force System Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) End trimming unit IT 90-X (0.65 kW x 2) 28 m/min. 0 – 25° Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC controlled) RF 40 (1 x 2 kW) 0 – 25° Multipurpose unit (radius and profile milling unit) AR 80 (0.65 kW x 2) 25 m/min ROTAX. 8+8 position turret (max. 25 m/min) Motors with automatic tool change (tools) Multi-profile scraper unit (CNC controlled) RB 40 (multi-profile) Flat scraper unit RC 20 + spray unit (for polishing liquid) Buffing unit SZ 30 (0.37 kW x 2)

Stanje: zelo dobro (rabljeno), Double-sided – First machine in a production line Double-sided (1 LEFT single-sided machine + 1 RIGHT single-sided machine) Edge thickness in rolls (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 100 / 1200 Control: PC-based, Windows / PC software / SINTRA Feed speed (adjustable) m/min: 10 – 40 (INVERTER CNC) EDGING PROCESSING (for each side): Spray unit (for liquid non-stick agent) No. 2 hoggers DT 10 (5.8 kW x 2) Free space EDGEBANDING UNIT (for each side): 1st gluing station (hot melt + pre-melter) SP 30 (high melt + Edge Control EC 40) Lrjdpfxeu Rc Hyj Aamjp 2nd gluing unit (pre-melter with hot air) Air Force System Edge pressure zone (CNC-controlled) + edge magazine for rolls (no. 6 positions) Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC-controlled) RF 40 (2 x 1 kW) 0°–25° No. 1 universal routing unit for grooving/rebating/profiling EB 60 (1 x 5 kW) – ISO 30 motor Multi-profile scraper unit (CNC-controlled) RB 40 Flat scraper unit RC 20 Spray unit (for polishing fluid) Buffing unit SZ 30 (2 x 0.37 kW)

Stanje: novo, Leto izdelave: 2020, Transnorm Belt Conveyor Folding Diverter 3000x1120x1000 RA2286 Technical Specifications: Conveying length (NL): 3000 mm Belt body width (NB): 1120 mm Belt width (GuB): 1000 mm Construction/Transfer height (BH): 1050 mm +100 mm adjustment range Minimum transfer height: 500 mm Maximum transfer height: 1600 mm Base dimensions: 3000x1300 mm Tilting height difference: 1100 mm Conveying speed (v m/s): 1.5 m/s Lifting/lowering speed: 1.8 s / 1.2 s Drive: Nord geared motor Electrical data: Conveyor belt motor: 50Hz V380-500, kW 1.5 / S1 Tilting motor: 50Hz V220/400, kW 3.0 / S1 Return roller (UR): Ø = 80/120 mm Drive drum (AT): Ø = 82 mm Year of construction: 2020 Optional available: Frequency inverter for stepless speed control Lrodpfxstp Tvwe Aamop Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you soon. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics

Stanje: rabljeno, Leto izdelave: 2001, Lippert Belt Conveyor Folding Chain GF 1360-750-600 RA1590 Ledpfx Aajk Abdpsmsrp The Lippert conveyor belt dates from 2001 and is in good (used) condition. The belt conveyor is equipped with an SEW brand motor fitted with a MOVIMOT frequency inverter for adjustable speed control. Side guides and/or light barriers can be installed upon request at an additional cost. Support stands are not included in the scope of delivery but are optionally available on request. The images shown depict the conveyor system in its installed state at a logistics center. Technical Data: • Conveyor length (NL): 1360 mm • Frame width (NB): 750 mm • Belt width (GuB): 600 mm • Construction height (BH): 105 mm • Belt height: 550 mm • Base dimensions: 1170x900 mm • Total height: 1070 mm • Tilting height difference: 300 mm • Conveyor speed (v m/s): adjustable up and down with frequency inverter • Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical Data: • Conveyor belt motor: 50Hz V380-500, kW 0.075 / 0.37 / S1 • Tilting motor: 50Hz V220/400, kW 0.55 / S1 • Return roller (UR): Ø = 42 mm • Drive drum (AT): Ø = 64 mm • Belt: Type XVT-2128 • Year of manufacture: 2001 Optional: • Support stands • Side guides, one-sided or double-sided All prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For tailored, professional advice, please contact us. Get in touch by phone or email. We are happy to assist you with project planning and implementation. We look forward to hearing from you! Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics

Stanje: rabljeno, Leto izdelave: 2013, Kersting Plastic Chain Conveyor Incline Conveyor GF 3350-720-620 with Drip Tray for Cleaning RA1974 Technical Data: - Conveyor length (NL): 3350 mm - Frame width (NB): 720 mm - Belt width (GuB): 620 mm - Height/Belt incline (BH): rising from 920 mm to 1250 mm, height adjustment +/- 50 mm - Number of support legs: 2 units - Conveyor speed (v m/s): please contact us for required speed - Drive: SEW geared motor - Electrical data: 400 V / 50 Hz / 0.37 kW - Belt: plastic chain - Year of manufacture: 2013 Special Features / Accessories: - Drip tray for collecting runoff cleaning water All prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For personal, expert advice, simply get in touch with us. Ljdpfsk Abpajx Aamjrp Contact us by phone or email. We are happy to assist you in planning and implementing your projects. We look forward to hearing from you. With best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact partner for intralogistics.

Stanje: rabljeno, Leto izdelave: 2001, Lippert Belt Conveyor Folding Belt GF 1360-750-600 RA1829 The Lippert conveyor belt dates from 2001 and is in good (used) condition. The belt conveyor is equipped with an SEW brand motor featuring a MOVIMOT frequency inverter for speed control. Side guides and/or light barriers can be fitted as optional extras for an additional charge. Supports are not included in the scope of delivery but are available optionally upon request. The images displayed show the conveyor system in its currently installed state at a logistics center. Technical data: Conveyor length (NL): 1360 mm Frame width (NB): 750 mm Belt width (GuB): 600 mm Frame height (BH): 105 mm Belt height: 550 mm Base dimensions: 1270x1180 mm Total height: 1300 mm Tilt height difference: 300 mm Conveying speed (v m/s): 0.05–1.5 m/s Drive: SEW geared motor S37 DT71D4/MM03/BW1 Electrical data: Conveyor belt motor: 50Hz V380-500, kW 0.075 / 0.37 / S1 Tilting motor: 50Hz V220/400, kW 0.55 / S1 Return roller (UR): Ø = 42 mm Drive drum (AT): Ø = 64 mm Belt: Type XVT-2128 Year of manufacture: 2001 Optionally available: Supports Single-sided and double-sided side guides Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Lsdpfxek Abgvo Aamorp For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and point of contact for intralogistics

Stanje: rabljeno, Knapp Roller Conveyor Transfer Pusher Belt Transfer Unit 90° 525-690-625 RA1890 Manufacturer: Knapp Conveying direction: bidirectional Roller width (RW): 625 mm Nominal/outer width (NW): 690 mm Length: 525 mm Lredpfx Aajr R D Acjmop Roller diameter: 50 mm Roller pitch: 75 mm Belt transfer motor: SEW motor 3x 300-500V, 0.25kW Roller conveyor motor: Interroll EC300 Frame height: 170 mm Conveying speed: freely adjustable up to 1.25 m/s with Interroll EC300 Pneumatic lifting of the transfer belt Scope of delivery: without supports Options available: Supports Side guide, single-sided or double-sided Price: plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Contact us by phone or email – we are happy to assist you with planning and realizing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and partner for intralogistics

Stanje: rabljeno, Leto izdelave: 2014, Transnorm Inclined Conveyor, Declining Conveyor, Inclined Belt Conveyor with Curve GF 4600+700-600-500 RA2195 Technical Specifications: Conveying length (NL): 5300 mm (4600 mm inclined conveyor + 700 mm curve) Frame width (NB): 600 mm Belt width (GuB): 700 mm Construction height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Support feet: optionally available Conveying speed (v m/s): Please contact us Drive: SEW geared motor, R40DT80N4BMG Electrical data: 50Hz V380-500, kW 0.75 S1 Lsdeq Imt Uspfx Aamsrp Drive drum: Ø = 81 mm Return roller: Ø = 81 mm Optionally available: - Supports - Side guides (single-sided and double-sided) - Length adjustment (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert consultation, simply get in touch with us. Contact us by phone or email. We are happy to support you with planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG team Your specialist and contact for intralogistics.

Stanje: rabljeno, Leto izdelave: 2014, Transnorm Incline Conveyor Decline Conveyor Inclined Conveyor with Curve and Pre-Run GF 7200+700-700-600 RA2201 Technical Data: Conveyor length (NL): 7900 mm (7200 mm incline conveyor + 700 mm curve) Frame width (NB): 700 mm, 8000 mm including motor Belt width (GuB): 600 mm Frame height (BH): 80 mm, 430 mm including motor Angle: freely adjustable between 0 and 15° Support legs: optionally available Conveying speed (v m/s): 0.75 Drive: SEW gear motor, R27 DT90S4/BMG/TH Electrical data: 50Hz V380-500, kW 1.1 S1 Drive drum: Ø = 81 mm Return roller: Ø = 81 mm Optional extras: Support legs Side guides (single- or double-sided) Infinitely adjustable conveying speed via frequency inverter Length adjustment (longer/shorter) Ledpfxoq Izpkj Aamsrp Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply contact us. Feel free to reach out by phone or email. We are happy to assist you in planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG team Your specialist and contact for intralogistics

Stanje: rabljeno, Leto izdelave: 2001, Lippert Belt Conveyor GF 1090-650-500 RA1399 The Lippert conveyor belt was manufactured in 2001 and is in good used condition. The belt conveyor is equipped with an SEW motor featuring a MOVIMOT frequency inverter for variable speed control. Side guides and/or light barriers can be installed upon request for an additional charge. Support legs are not included in the scope of delivery but are available as an option upon request. The photographs display the conveyor system while still installed in a logistics center. The conveyor belt was previously used as a folding belt. The folding mechanism was removed during dismantling. On request, we can also supply this unit in a folding belt configuration. Technical Data: Conveying length (NL): 1090 mm Frame width (NB): 650 mm Belt width (GuB): 500 mm Installation height (BH): 105 mm Support legs: optionally available Conveying speed (v m/s): adjustable up and down via frequency inverter Drive: SEW geared motor R17 DT71D4/MM03/BW1 Electrical data: 50 Hz V380-500, kW 0.075 / 0.37 / S1 Return roller (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Belt: Type HSL-8E Year of manufacture: 2001 Special features / Accessories: Folding belt version available on request Optionally available: Support legs Single-sided or double-sided side guides Ledpjk Aa Ugjfx Aamorp All prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional consultation, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and point of contact for intralogistics.

Stanje: rabljeno, Tool Presetting Device SOMET Type SPS 500 U Machine No. S1 Year of Manufacture: 1987 Table Surface: 545 x 1000 mm Travel: X = 500 mm, Y = 340 mm Portal Width: 550 mm Height (table to underside of portal): 250 mm Lsdpodzqrtefx Aamerp - Longitudinal portal guides right and left on the table - Adjustment via precision leadscrews with handwheel - Rapid adjustment via electric release - Projector screen Ø 150 mm with crosshair and coordinates MEOPTA PMP100 - 2 clamping devices for tool measurement included - Mounted on a base with shelf and drawer Required space (L x W x H): 1100 x 700 x 1650 mm Weight: 560 kg Good condition

Stanje: rabljeno, prevoženi kilometri: 397.178 km, moč: 265 kW (360,30 KM), prva registracija: 08/2020, vrsta goriva: dizel, največja dovoljena obremenitev: 8.100 kg, skupna masa: 18.000 kg, konfiguracija osi: 4x2, medosna razdalja: 5.500 mm, barva: srebrn, voznikova kabina: drugo, vrsta prenosa: polavtomatski, emisijski razred: Euro 6, vzmetenje: zrak, prostornina tovornega prostora: 50 m³, dolžina tovornega prostora: 7.320 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 2.750 mm, Leto izdelave: 2020, Oprema: klimatska naprava, parkirni grelec, spojka prikolice, tempomat, Ta ponudba ni zavezujoča. Pridržujemo si pravico do napak in predhodne prodaje. V primeru navedbe tuje valute se uporablja trenutni dnevni tečaj. Veljavna je valuta lokacije vozila. Motorna zavora visoke zmogljivosti, prediktivni nadzor pogonskega sklopa, zračno vzmetenje, zadnja os, medosna razdalja 5500 mm, rezervoar 390 l, aluminij, dodatni rezervoar 390 l, aluminij, AdBlue rezervoar 75 l, AHK, L-kabina, L-kabina, širina kabine 2,50 m, BigSpace, MirrorCam, stabilizacijski asistent, udobna postelja zgoraj, široka, nastavljiva, udobna postelja spodaj, nosilec za prenosnik, hladilnik v predalu pod posteljo, električna stacionarna klimatska naprava, avtomatska klimatska naprava, dodatno ogrevanje s toplo vodo, voznikov vzmeteni sedež, udobje, asistent za ohranjanje voznega pasu, asistent za ohranjanje razdalje, asistent za pozornost, asistent za prometne znake, asistent za mrtvi kot, tempomat, druga nadgradnja, vlečna kljuka premer 40 mm, visoko nameščena, drsna ponjava levo, drsna ponjava desno, kamera zadaj ne deluje, nova za doplačilo. Brez EDSCHA, nakladalna ploščad za doplačilo. Lrodpfxsyhzzbo Aamsp

Stanje: rabljeno, prevoženi kilometri: 1.016.268 km, prva registracija: 03/2011, vrsta goriva: dizel, skupna masa: 115 kg, barva: bela, voznikova kabina: spalna kabina, emisijski razred: Euro 5, vzmetenje: zrak, Leto izdelave: 2011, RENAULT MIDLUM, OSEMTONSKA OSEMKOLIČNA OVOJE + ZADNJI NAKLADALNI POHOD Lrodpfx Ajzk D Nnjamop

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 259.099 km, moč: 162 kW (220,26 KM), prva registracija: 06/2002, lastna masa: 5.940 kg, skupna masa: 8.600 kg, konfiguracija osi: 4x2, voznikova kabina: dnevna kabina, število sedežev: 7, Leto izdelave: 2002, Oprema: spojka prikolice, MAN L2000/Ploščad/Pregrinjalo/Kiper • Proizvajalec: MAN • Tip: L 2000 • Prevoženi kilometri: 259099 km • Prva registracija: 06.2002 • Moč: 162 kW / 220 KM • Konfiguracija osi: 4x2 • Menjalnik: ročni, 6-stopenjski • Dvojna kabina • 7 sedežev • Strešno okno • Vlečna kljuka • Kipanje zadaj • Dimenzije ploščadi: - Dolžina: 4,50 m x Širina: 2,30 m x Višina: 2 m - Stranice: 50 cm • Dimenzije kiperja: - Dolžina: 2,50 m x Širina: 2,30 m • Lastna masa: 5940 kg • Nosilnost: 2660 kg • Dovoljena skupna masa: 8600 kg • Emisijski standard: Euro 1 • Nemško vozilo Lredpfozdtp Dsx Aamsp • Nemška dokumentacija • Takoj pripravljeno za uporabo • Ta ponudba ni zavezujoča in si pridržujemo pravico do spremembe. - Vmesna prodaja pridržana - Možne napake in tipkarske napake niso izključene - Prodaja v skladu z našimi splošnimi pogoji.