Rema Ds 25/300 nakup rabljenega (29.893)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33802030369, lastna masa: 31.110 kg, največja dovoljena obremenitev: 34.889 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2022, naslednji pregled (TÜV): 01/2027, skupna dolžina: 7.390 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5*, barva: rdeča, Leto izdelave: 2022, The images are archive photos; the vehicle may still be in use! Fine-grain steel welded construction, kingpin plate with exchangeable 2" kingpin, container mounts: 1 x 20-foot container (centered) or swap body container 7.15 / 7.45 m, front not retractable, extended version twist locks for container securing. 24-ton, 2-speed landing gear, one-sided operation, with straight lower section, without compensating ram. Wheel chocks with holders, side underrun protection, aluminium rear underrun protection, with anti-spray mudflaps according to EU regulations, stainless steel (VA) drip tray with 1 1/4-inch drain pipe + 1 1/4-inch shut-off valve, including drip plate, with perforated step plates approx. 400 mm wide, left & right between drip tray and longitudinal frame. Kljdoy Tvphjpfx Akget Hose trays approx. 4500 mm long (incl. hose compartment) for pipe holders 2 x DN 200 external + 2 x DN 160 centered, rear hose compartment (VA steel) 300 mm deep, splash-proof, lid (VA steel) all around with rubber seal, with drain hole at lowest point, then lidless on hose pipes, stainless steel grounding lug rear in FR-right on frame with international grounding sticker on frame, rear right rear access steps on underrun protection, at main frame rear outer FR-right: step plate approx. 260 mm long and 300 mm wide. Axles & suspension SAF disc brake axles, "axle/chassis laser aligned" to reduce tire wear and fuel consumption, staggered axle spacing 1410/1310 mm (combined transport) up to 44 tons GCW. Air suspension, first axle automatic lifting axle, including forced lowering and start assist, operated via "3x brake activation" (start assist operable up to 30% axle overload and speeds up to max. 25 km/h). Braking system 2-line compressed air braking system, color-coded line routing for easy service. Spring-loaded parking brake. 2 non-interchangeable coupling heads at front (without connecting line), EBS electronic braking system with EBS socket at front (without connecting cable). Note: The trailer must only be towed by tractor units that ensure proper ABS functionality! With raising and lowering valve, vehicle dynamic stability control. Axle load detection via EBS CAN-bus signal, for display in the driver cab (truck must be pre-equipped, no truck installation). Wheels & Tyres 385/65 R22.5, manufacturer’s brand of choice, steel rims, factory silver. Electrics 24 volt, multi-chamber tail lights, side yellow LED lighting, 2 white position lamps at the front, 2 white/red lane marker lights at the rear, 1 x 15-pin socket at the front (without connecting cable). Operating Notes The total permissible weight stated is technically possible; however, depending on the load, the total weight may not be achievable while adhering to permissible axle, kingpin and saddle loads (poor handling may result from incorrect load distribution). This vehicle must only be loaded with 20’ tank containers compliant with ISO 668 and specifically ISO 1496-3! The tank containers must have "end-load-transfer areas". Approval/Country/Signs Warning sign according to ECE-70, ADR inspection as per 9.1.1.2 of ADR, EX/II, EX/III, approval certificate for vehicles transporting certain dangerous goods (ex. B3), with warning sign at the rear (not valid for substances according to UN 0331 and 0332 – explosives B-E), contour marking with reflective strips as per ECE R048, white at sides, yellow at rear.

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 111026-05-02, dolžina transportnega traku: 1.300 mm, širina transportnega traku: 250 mm, skupna dolžina: 2.500 mm, skupna širina: 600 mm, skupna višina: 1.200 mm, skupna masa: 80 kg, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, proizvajalec motorjev: Württ. Elektromotoren GmbH, Oprema: Na voljo je tipska ploščica, Dobro ohranjen pregibni transportni trak Frasch je namenjen fleksibilnemu transportu kosovnega ali razsutega blaga preko različnih višin, zlasti kadar je treba materiale vodoravno izvleči neposredno iz strojev ali naprav. FS500 levo (Separator) Prodaja le pravnim osebam, brez garancije. Kodpfx Akjy Ti Scegolt

Leto izdelave: 2024, stanje: novo, YOU BUY DIRECTLY FROM THE MANUFACTURER Everything can be configured as desired, with very short production and delivery times. Further information is available upon request. Technical data available upon request. Standard Equipment Y1, Y2, X, R – 4 axes Control unit – CNC DT 15 Backgauge servomotor & linear guide ball screw system (X-R) CNC crowning European-style tool clamping system Movable support arms (with T-slot and stopper) Specially designed hydraulic block and valves according to global standards Electrical equipment according to global standards Optional Equipment Ksdpfxsfirwmo Akgslt CE Manual F. AKAS II M FPSC-B-C + safety guards with switch CE F. AKAS-LC II AKAS-3 M Motorized + FPSC (Safety PLC) CE BLVT Safety – only for tandem machines Z1, Z2 axes X1, X2 axes R1, R2 axes Delta X axis, +/- 250mm travel or +/- 125mm CNC controlled X axis = 1000 mm – rear protection with light barrier AP3-AP4 bending aids Height-adjustable laser angle measurement system Quick-clamping system Hydraulic and pneumatic tool clamping systems Upper and lower tools Lower tool positioning system Parking area Central lubrication system Oil cooler Additional backgauge fingers and additional movable support arms Special packaging for overseas transport _____ With over 60 years of experience in research and production of machinery for sheet metal processing, producing 8,000 machines annually in three technologically advanced manufacturing facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally recognized producers in the industry, with products sold in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact from the Durmazlar group, providing you with expert advice and support regarding sheet metal processing machinery. Our demonstration center gives you the opportunity to get an overview of our machines on-site, to experience first-hand the quality and precise technology of our products, and to receive the best possible consultancy tailored to your business objectives. Our task is to be your direct local contact, providing services around training and customer support. We are pleased to support you from Germany—with advice, purchase assistance, and throughout the entire lifecycle of your machine. With our German branch, we are always close by when you need us, able to react quickly and efficiently. Here, we are your reliable partner for technologically advanced solutions in sheet metal processing.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 7.690 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NL301GJ1021, Tehnični podatki - MORI SEIKI NL3000Y/1250 Obratovalni čas: 7690 h Leto izdelave: 11.2007 Število osi: 5 Pomik X osi: 280 mm Pomik Y osi: 120 mm Pomik Z osi: 1300 mm Vrtina vretena: 105 mm Število orodij: 12 Moč vretena: 22 kW Število vrtljajev vretena: 3000 RPM Razdalja postelje do nagiba: 995 mm Obhod čez prečni suport: 825 mm Največji premer obdelave: 420 mm Kapaciteta materiala (palice): 90 mm Največja dolžina reza: 1260 mm Moč motorja za rezkanje: 5,5/3,7 kW, hitrost 6000 RPM Hitri pomiki: XZ: 30 m/minuto Pomik zadnjega trupa: 1284 mm Nastavitvena naprava za orodje, 3-čeljustna glava, hladilna tekočina, zaklenjene zaščitne naprave, nizkonapetostna svetilka Dimenzije (približno) D x Š x V: 5200 x 3400 x 2270 mm Teža: cca 8100 kg Klsdoy Sxh Dopfx Akgot

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Arburg 630S 2500-1300 ECO / Production Line with Sepro Industrial Robot SDR 22S Year of manufacture: 2008 Injection Unit: Screw diameter: 55 mm Shot weight: 521 g Injection pressure: 2380 bar Dosage volume: 570 ccm Clamping Unit: Clamping force: 250 t Kedjy Smfwjpfx Akgelt Tie bar distance: 630x630 mm Platen size: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 2 Hot runner control x 15 Injection unit hardened – bimetal Machine equipped with cylinder / battery with compressed nitrogen (additional charge for high-speed operation) ECO – the machine features a system for setting the minimum mould height Robot – Sepro Industrial Robot SDR 22S Year of manufacture: 2016 4-axis robot: 3 axes are driven by servo motors (electric); C axis – pneumatic Axis stroke: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 12,510 kg Length/Width/Height: 6.57x1.76x2.46 m All offered machines are started up by our service engineers prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Stanje: dober (rabljeno), Vrtalna zmogljivost: 13 mm Vpenjalno vreteno: B 16 6 hitrosti vretena: 410 - 3400 vrt/min Globina vrtanja: 60 mm Mere stroja (D x Š x V): 750 x 660 x 1340 mm Teža: 250 kg - Vrtalna glava nastavljiva po višini - Motor z možnostjo preklopa polov - Spreminjanje hitrosti z jermenskim pogonom Ksdpfx Aswnfarskgolt Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D-44143 Dortmund - Wambel

Stanje: novo, Premer / mm Rezi (število) / 0 Teža / kg Standardni cilinder Proizvajalec: FESTO Tip: DSBG-125-935-KE-P-CS Št. materiala: 2801899 F108 Maks. tlak: 10 bar Kedpfxoy S Drno Akgelt

Stanje: rabljeno, prevoženi kilometri: 25.550 km, moč: 140 kW (190,35 KM), barva: siv, vrsta prenosa: samodejen, Leto izdelave: 2025, Oprema: ABS, airbag, centralno zaklepanje, greljenje sedeža, klimatska naprava, servovolan, - Passenger airbag - Power windows – left - Power windows – right - Driver airbag - To provide you with the best possible consultation, we kindly ask you to schedule an appointment; Mr. Kiel will be happy to assist you, Tel: B25 Electric parking brake BA3 Active Brake Assist BH1 HOLD function BS1 Brake calipers with Mercedes-Benz lettering C6L Multifunction steering wheel C74 Illuminated Mercedes-Benz entry sills CA3 Active Steering Assist CF8 Sports suspension CK8 Heated steering wheel CL1 Steering wheel adjustable for tilt and height CL3 Leather steering wheel CM2 Bumpers and attachments painted in body color CU4 Aerodynamics package D14 Anodised roof rails E07 Hill start assist E1D Digital radio (DAB) E1E Navigation E1T Touchpad Ksdsy Tg D Aopfx Akgolt E4S Smartphone integration package E7H MBUX multimedia system High EI0 Wireless charging system for mobile devices EL9 2-way speakers front and rear ES2 12V socket in trunk / load compartment ES3 12V sockets for rear rows, right & left ET4 Active Distance Assist DISTRONIC F2W Winter package F3T Decorative trim in open-pore dark grey olive wood look F3Z Comfort closing F48 Windscreen washer system heating F65 Automatically folding exterior mirrors F66 Lockable glove box F69 Exterior mirrors F84 Digital interior mirror FG0 Center console with roller shutter FG9 Clip-on cupholders in rear armrests FP3 Mirror package FS5 Illuminated vanity mirrors in sun visors G43 9G-TRONIC H00 Hot air duct to passenger compartment H15 Front passenger seat heating H16 Driver's seat heating H20 All-round heat-insulating glass HH4 THERMOTRONIC automatic climate control HZ7 TEMPMATIC semi-automatic air conditioning in rear IN2 Wheelbase 3200 mm, long overhang J55 Seat belt warning system for passenger seat JA7 Blind spot assist JA9 Traffic sign assist JB4 Active lane keeping assist JB6 Parking package with 360° camera JF2 ENERGIZING comfort JH0 Widescreen cockpit JH3 Communication module (LTE) for digital services JM2 Extended automatic restart on highways JM3 Route-based speed adaptation JM4 Active speed limit assist JP1 PRE-SAFE JS3 Driving assistance package JW8 ATTENTION ASSIST KB5 Main fuel tank 70 liters L45 MULTIBEAM LED with adaptive high beam assist PLUS LA2 Adaptive headlight assist LB9 Exit lights LC4 Comfort roof control unit LC5 Surround lighting in exterior mirrors LC6 Lighting in rear grab handles with reading spot LC7 Front footwell illumination LC8 Surround lighting for tailgate LE4 Ambient lighting in cockpit with 64 colors LE6 Night lighting in rear LG4 Tail, brake, and turn signal lights in LED technology MJ8 ECO start/stop function MO5 EMISSION STANDARD EURO 6e MU6 OM 654 DE 20 LA 140 kW (190 hp) 3,800 rpm MX0 BlueEFFICIENCY package P28 EASY PACK package Electric sliding door/tailgate P2Y STYLE Plus package Q50 Detachable tow bar QA4 Towing capacity 2,500 kg RK8 7 J x 17 light-alloy wheels, 20-spoke design... Metallic paint, alloy wheels, electronic immobiliser, ESP, navigation system, particulate filter, warranty, rain sensor, electric side mirrors, sports suspension, Bluetooth, onboard computer,...

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Tlačna sila: 225 t Dolžina krivljenja: 4050 mm Krmiljenje: DA 69 TW Vsebnost olja: 400 l Skupna potrebna moč: 17 kW Teža stroja cca: 18.100 kg Dimenzije: 5700 x 2610 x 3300 mm Kedpsyz S Ngefx Akgelt

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Tlak: 125 t Upogibna dolžina: 3000 mm Razdalja med stebri: 3100 mm Krmiljenje: Cybelec VisiTouch 24MX Hod: 300 mm Vgradna višina: 500 mm Hitri pomik dol: 200 mm/s Hitrost upogibanja: 0-12 mm/s Skupna priključna moč: 15 kW Teža stroja pribl.: 11.500 kg Dimenzije: 4080 x 3110 x 1800 mm Standardna oprema: Osnovna oprema: - CNC krmiljenje Cybelec CybTouch 15 - Osi: Y1-Y2-X-R - Popolnoma dinamičen bombirni sistem - Sistem za kompenzacijo elastičnosti okvirja – G-REFLEX - Zadnji prislon, model GHP-4 - Glavni motor s servopogonom - LED prikazovalnik na pritiskalni gredi za vizualizacijo pozicije prislona - Varnostni sistem: DSP AP+MCS - HAWE hidravlični sistem - CE standard Kjdjx Sq Hljpfx Akgelt - Mehanska pritrditev zgornjega in spodnjega orodja v sistemu PROMECAM

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Pritisk: 250 t Dolžina upogibanja: 3100 mm Razdalja med stebri: 2600 mm Krmiljenje: Cybelec VisiTouch 24 Hod: 300 mm Izvleček: 500 mm Vgradna višina: 500 mm Hitri pomik navzdol: 175 mm/s Hitrost upogibanja: 0-12 mm/s Skupna priključna moč: 22 kW Teža stroja cca.: 13.000 kg Dimenzije: 3900 x 2150 x 3360 mm Standardna oprema: Osnovna oprema: - CNC krmiljenje Cybelec Visitouch 24 - 6+1 osi: Y1-Y2-X-R-Z1-Z2 +V - Avtomatiziran dinamični hidravlični bombirni sistem: G-CS - Sistem za kompenzacijo okvirnega upogiba – G-REFLEX - Zadnji prislon model GHP-4 - Glavni motor s servopogonom Kedpfxeylwm Rs Akgslt - LED prikazovalnik na premskem nosilcu za vizualizacijo pozicioniranja prislona - Varnostni sistem: DSP AP+MCS - HAWE hidravlični sistem - CE standard - Mehanska zgornja in spodnja orodna vpenjala PROMECAM sistem

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, obratovalne ure: 7.141 h, nosilnost: 2.500 kg, dvižna višina: 4.760 mm, prosto dvigovanje: 1.500 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 2.600 mm, vrsta pogona: Elektro, Electric 4-wheel forklift Load centre: 500 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: Good Front tyres type: Superelastic Front tyres condition: 20 - 40% Rear tyres type: Superelastic Rear tyres condition: 20 - 40% Description: The vehicle undergoes a safety inspection (UVV). Before delivery, the machine receives a service and is cleaned. Painting is available at an additional cost upon request. Sideshift, Fork positioner, 3rd valve, 4th valve, Rear work light, Front work light, Klsdpfx Aevla Hpokgjt

Stanje: dober (rabljeno), Interna številka artikla: 26041 Brusilni stroj za svedre REMA Tip: S2/40 Moč: 0,9 kW / 380V 2900 obr/min Vključno z dodatno opremo Kedpfey Hr R Uex Akgelt Mere (DxŠxV): 100 x 70 x 120 cm Teža: ca. 200 kg Stroj je popolnoma funkcionalen in ga je po dogovoru mogoče pod napetostjo ogledati na več kot 500 m² ogrevani skladiščni površini.

Stanje: rabljeno, Leto izdelave: 2016, obratovalne ure: 9.412 h, Oprema: pogon na vsa štiri kolesa, * CAT 325 FL CR kratkorepi bager * Leto: 2016 * Delovne ure: 9.400 h * Teža: 25.000 kg * Gumijaste ploščice * Hitri menjalnik orodij * 1 x hidravlična grabilska žlica Klodpfoyum I Aex Akgst * Več slik in videov po Whatsappu * Podatki brez garancije, vmesna prodaja pridržana.

Stanje: rabljeno, Leto izdelave: 2019, obratovalne ure: 440 h, nosilnost: 2.500 kg, dvižna višina: 6.880 mm, vrsta goriva: električni, Oprema: zaščita za glavo, Net sale price: €23,900 Well-maintained Linde E25 R Roadster forklift from first ownership, in excellent condition, for sale. E25R Roadster / Panoramic View Year of manufacture: 2019 Operating hours: 440 Hydraulic side shift Hydraulic fork positioner Triplex mast Basic load capacity: 2,500 kg Speed with/without load: 20 km/h Overall width b1: 1,150 mm Total length l1: 3,318 mm Height above overhead guard h6: 2,128 mm Triplex mast: 6,880 / 2,974 / 2,194 mm Vehicle lighting compliant with German Road Traffic Regulations (StVZO) Kledpjy I Hzqefx Akgst Load indicator "Plus" Battery: 80V 4PzS 500Ah BlueSpot Driving mode UVV inspection can be performed as new upon handover, upon request Delivery available for an additional fee --- Opening hours and further information: Mon – Thurs: 9:00 am to 4:00 pm Fri: 9:00 am – 1:00 pm Sat: 9:00 am – 12:00 pm Address: Tabakried 11 84076 Pfeffenhausen Germany For inquiries: Christian Hirsch (WhatsApp) Please try to call multiple times as we are often with customers. Emails are only checked occasionally, thank you for your understanding! --- The information provided online is non-binding and for descriptive purposes only. It does not constitute guaranteed characteristics. The seller is not liable for typographical or data transmission errors, changes, or entry mistakes. Subject to errors and prior sale.

Stanje: rabljeno, Leto izdelave: 2000, (1) Brizgalni stroj, rokovanje: Arburg | Multilift H z osjo B | 2000 Kontrola temperature: HB Therm | HB-160 Z1 | 2012 Razno: 1x sistem za rokovanje Klodpey N Sausfx Akget 1x transportni trak (integriran v brizgalni stroj) 1x transportna enota, podjetje Motan 1x pakirna celica z: Robotom, podjetje Yaskawa GP-7 Kamera sistemom, podjetje Omron Transportnim trakom, podjetje Robotunits Tehnične podrobnosti: Obratovalna napetost: 400 V Frekvenca (Hz): 50 Krmilna napetost 1: 230 V Krmilna napetost 2: 24 V Nazivni tok motorja/gretja (A): 200,0 / 93,0 Skupna priključna moč (kW): 42,0

Stanje: zelo dobro (rabljeno), Kataloška številka 7937 TEHNIČNI PODATKI - maks. premer žaginega lista: 500 mm - premer vretena: 30 mm - zgornji pnevmatski pritiskač - zaščita za žagin list - pnevmatski izvlek žaginega lista - maks. višina reza: 150 mm - maks. širina reza: 350 mm - glavni motor: 5,5 kW - premer odvodnih nastavkov: 120 mm - mere delovne mize (dolžina/širina): 740x500 mm - višina mize od tal: 900 mm - valjčne mize: 2 kosa - vhodna valjčna miza + vodilo: 2050 mm - izhodna valjčna miza: 1650 mm - širina valjčne mize: 510 mm - skupne mere stroja brez mize (dolžina/širina/višina): 1200x640x1280 mm - teža: cca 500 kg PREDNOSTI – proizvedeno na Poljskem – originalna DTR dokumentacija – 2 valjčni mizi – pnevmatski dvig žaginega lista – rabljena žaga, v odličnem stanju Neto cena: 14.900 PLN Neto cena: 3.550 EUR glede na tečaj 4,2 EUR (Cene se lahko spremenijo glede na večja nihanja tečajev) Kljdoy Tw Skopfx Akgjt

Leto izdelave: 2019, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 867721275, The HOBART PREMAX FTPi 2-S-AN-R-DS6 (Premium Equipment) is a powerful, industrial conveyor dishwasher designed for maximum capacity and highest efficiency in large-scale catering environments such as commercial kitchens, canteens, and catering operations. Hobart dishwashers employ various technologies for energy efficiency, with heat pump technology (HP) being primarily used for drying and energy savings. Heat Pump for Drying: Hobart offers models with heat pump technology that help heat the drying zone and boost energy efficiency. Wastewater Heat Recovery: The wastewater heat recovery system utilizes the energy from hot wastewater (60 °C) to preheat incoming fresh water up to 40 °C before it enters the boiler. Drying & Energy: By using heat pumps (HP), the machine draws energy from the ambient air to heat the drying air, reducing energy consumption. Advantages: These technologies result in lower operating costs and improved energy efficiency. Due to its extensive features, this machine has a total connected load of only 27.8 kW—a remarkable value for a machine of this class—enabling significant, long-term savings on operating costs. The disassembly was performed by Hobart factory service engineers. The dishwasher originates from a well-known industrial elevator manufacturer. Following the construction of a new facility, the machine became available. Expected completion of maintenance: approximately kW 24 Commissioning will also be carried out by Hobart’s factory service (for a fee), ensuring warranty coverage. You are acquiring a refurbished, fully operational conveyor dishwasher, including commissioning and detergent dosing service by Hobart factory service. PREMAX FTPi Series Highlights: • SENSOTRONIC Wash Intelligence: Automatically adjusts water, detergent, and energy consumption to the level of soiling and quantity of dishes. • LOW-CHEM Detergent Saving System: Reduces detergent consumption by up to 80% thanks to a special pre-wash zone and water regeneration. • CLIMATE-PLUS Energy-Saving System: Integrated heat recovery system to reduce energy costs. • Automated Processes: Includes tray and cutlery separation magnets for efficient operation. • Model Designation Breakdown: - FTPi: PREMAX Conveyor Dishwasher (Intelligent) - 2: Number of wash zones (two) - S: SENSOTRONIC (wash intelligence) - A: Automatic Operation - N: Normal Infeed Section - R: Right-to-left operation Kljdpfxsy N N Icj Akgjt - DS6 Main Technical Data (manufacturer specifications): • Capacity: Designed for high throughput (over 5,000 plates/hr in S-configuration) • Water Consumption: ca. (130–160) l/h (depending on program/load) • Orientation: R (right-to-left operation, i.e., infeed right, outfeed left) • Machine Type: Conveyor Dishwasher • Model: Premax FTPi 2-S-AN-R-DS6, FHP • Heating Type: Electric • Voltage: 400 V • Power Supply: 3-PE • Fuse Protection: 3 x 50 A • Power Rating: 27.8 kW • Serial No.: 867721275 • Year of Manufacture: 2019 • Wash Zones: S Pre-wash/Wash/Rinse/S Dry • Overall Length: 685 cm • Outfeed: 100 cm • Conveyor Width: 44 cm • Conveyor Height Clearance: 61.2 cm • Height: 190 cm • Height with open hood: 215 cm • Width: 68 cm • Ventilation: Climate TE-PRO Subject to changes and errors.

Stanje: novo, Leto izdelave: 2024, Are you looking for a powerful press brake that can handle even the most demanding requirements? The Durma press brake AD-S 803000, featuring a pressing force of 3,000 tons, could be the perfect solution for your needs. Kodji Da Syepfx Akgelt With an impressive bending length of 8 meters and a stroke of 750 mm, this machine is capable of processing large and heavy materials with the utmost precision. The installation height of 1,000 mm allows for flexible and convenient positioning of the workpiece. At the heart of the machine is the movable DELEM-DA 66T control unit, ensuring intuitive operation and precise control of the work process. Additionally, this press brake is a custom-built solution and can be configured to meet all your individual requirements. If you are interested in the Durma press brake, we are happy to provide you with personal consultation. Other machines are also available and can be inspected on site. Feel free to contact us for more information and let us work together to find a bespoke solution tailored to your needs. Control type: DELEM DA-66T Protective oil: suitable for sea transport Front safety system: FPSC (MANUAL) Sheet support arms: Movable support arm Stroke: 750 MM Backgauge type: X=1500 X, R Throat depth: 1050 MM Crowning: Hydromechanical Installation height: 1000 MM Power supply: 400V 50HZ Frame type: Welded construction Lower tool holder: DURMA Wide

Stanje: zelo dobro (rabljeno), 3HAC025338-002 Glavna servo pogonska enota, DSQC 617 D6_2E2C2B, 20 % popusta pri naročilu več kot 1 enote. RAZVOJ GSG ROBOTICS Podjetje GSG Robotics GmbH, ustanovljeno leta 2005 v Güterslohu, ima od leta 2015 sedež v Marl, kjer nudi obsežno servisno območje za vzdrževanje in popravilo robotov. Tekom let smo postali celovit partner na vseh področjih industrijskih robotov in avtomatizacijske tehnologije. Smo ponudnik celovitih storitev za dva priznana proizvajalca robotov, ABB in Fanuc. Kjdpfx Ajyl Av Dskgolt

Stanje: zelo dobro (rabljeno), ABB DSQC639 Glavni računalnik, več enot na zalogi, 20% popust pri naročilu več kot ene enote RAZVOJ PODJETJA GSG ROBOTICS Podjetje GSG Robotics GmbH, ustanovljeno leta 2005 v Güterslohu, ima od leta 2015 sedež v Marl in ponuja obsežno servisno območje za vzdrževanje in popravilo robotov. Skozi leta smo postali celovit partner za vse zadeve povezane z industrijskimi roboti in avtomatizacijsko tehnologijo. Smo ponudnik celovitih storitev za dva znana proizvajalca robotov: ABB in Fanuc. Kodpfxoxq Tqzs Akgjlt

Stanje: rabljeno, Leto izdelave: 2000, Arburg brizgalni stroj v dobrem stanju. Možen ogled v delovanju po dogovoru. Razpoložljivost: 06/2026 Zapiralna sila: 2500 kN Razdalja med veznimi palicami: 630 x 630 mm Teža brizga: 826 g Kedpey Sxlcefx Akgelt Tlak vbrizga: 1470 bar Premer polža: 70 mm

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 310.456 km, moč: 315 kW (428,28 KM), prva registracija: 01/2022, lastna masa: 10.560 kg, skupna masa: 26.000 kg, konfiguracija osi: 6x2, zavore: intarder, voznikova kabina: spalna kabina, emisijski razred: Euro 6, Oprema: asistent za ohranjanje voznega pasu, dvižna zadnja plošča, klimatska naprava, navigacijski sistem, parkirni grelec, Mercedes Benz Actros 2543/Pomične zavese/Edscha streha • Proizvajalec: Mercedes Benz • Tip: Actros 2543 • Prevoženi kilometri: 310456 km • Prva registracija: 01.2022 • Moč: 315 kW/428 PS • Menjalnik: Avtomatski • Kabina za dolge razdalje • Navigacija • Tempomat • Intarder • Pomične zavese • Edscha streha • Dvižna os • Asistent za ohranjanje voznega pasu • Mere zabojnika: D: 7,10 m x Š: 2,50 m x V: 2,55 m • Dvižna ploščad: Bär BC 1500R4-G4 • Lastna masa: 10560 kg • Nosilnost: 15440 kg • Dovoljena skupna masa: 26000 kg • Euro 6 Kljdpfx Aksyx Ickogjt • Nemško vozilo • Nemški papirji • Takoj pripravljeno za uporabo • Ponudba ni zavezujoča in je na voljo do preklica. - Vmesna prodaja pridržana, - Napake in/ali tipkarske napake niso izključene. - Prodaja po naših SPP.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 344.500 km, moč: 315 kW (428,28 KM), prva registracija: 01/2022, vrsta goriva: dizel, lastna masa: 10.560 kg, največja dovoljena obremenitev: 15.440 kg, skupna masa: 260.000 kg, konfiguracija osi: 4x4, gorivo: dizel, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, število sedežev: 2, dolžina tovornega prostora: 7.100 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 2.550 mm, Leto izdelave: 2022, Oprema: dvižna zadnja plošča, klimatska naprava, retarder, Mercedes Benz Actros 2543/drsna ponjava/Edscha streha • Proizvajalec: Mercedes Benz • Tip: Actros 2543 • Kilometri: 344.500 km • Prva registracija: 01.2022 • Moč: 315 kW/428 KM • Menjalnik: Avtomatik • Kabina za daljše razdalje • Navigacija • Tempomat • Intarder • Drsne ponjave • Edscha streha • Dvižna os • ACC (adaptivni tempomat) Kodpfsyxrh Rsx Akgelt • Asistent ohranjanja voznega pasu • Mere kesona: D: 7,10 m x Š: 2,50 m x V: 2,55 m • Nakladalna ploščad: Bär BC 1500R4-G4 • Lastna masa: 10.560 kg • Nosilnost: 15.440 kg • Dovoljena skupna masa: 26.000 kg • Euro 6 • Nemško vozilo • Nemška dokumentacija • Takoj pripravljeno za uporabo • Ta ponudba ni zavezujoča in je neobvezujoča. - Vmesna prodaja pridržana, - Napake in/ali tipkarske napake niso izključene. - Prodaja v skladu z našimi splošnimi pogoji.

Stanje: rabljeno, Leto izdelave: 2000, obratovalne ure: 5.018 h, številka stroja/vozila: 002272, vrsta goriva: dizel, Lastna teža: 14.800 kg Dvižna zmogljivost: 1.000 kg Delovna višina: 2.250 cm Stanje sprednjih pnevmatik: 100 Stanje zadnjih pnevmatik: 100 Transportne dimenzije (D x Š x V): 5,74 x 2,55 x 4,1 Za dodatne informacije se obrnite na skupino PFEIFER. Klsdpfxjx H Id Ro Akgst