Pnevmatska Stiskalnica Za Aluminijaste Profile nakup rabljenega (84.798)

Leto izdelave: 2018, stanje: zelo dobro (rabljeno), From insolvency: Model RRI 8460 Serial no. 18/70139708 Dcedpok T Av Rjfx Ac Noh with clamping device Spitznas with automatic feed, model 512089940 in original case

Leto izdelave: 2005, stanje: dober (rabljeno), From insolvency: Dcedpolczd Hefx Ac Njh Spitznas Model 512120010 Year of manufacture unknown Equipped with SPITZNAS clamping device with automatic feed, model 512089940 Comes in original case

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, moč: 55 kW (74,78 KM), Za prodajo je na voljo briketirnica Pawert 75/200, generalno obnovljena v letu 2025, pripravljena na takojšnje obratovanje. Tehnični podatki: Model: Pawert 75/200 Kapaciteta: do 1 t/h Moč glavnega motorja: 55 kW Stanje: generalno obnovljeno (2025) Pripadajoča oprema: -hladilna linija briketov -hidravlični sistem -dozirni polž -sistem hlajenja olja stroja -sistem hlajenja glave -komandni pult s PLC upravljanjem Prednosti: -zanesljiva industrijska briketirnica Dsdpfx Acsx Npitj Noch -primerna za neprekinjeno industrijsko uporabo

Stanje: zelo dobro (rabljeno), KATALOGŠKA ŠTEVILKA 8008 TEHNIČNI PODATKI - število nakladalnih polj: 2 - ročno nastavljive stranske stiskalke: 2x6 kos - pnevmatske zgornje stiskalke: 2x2 kos - maks. dolžina lepljenih elementov: 3000 mm - maks. višina lepljenih elementov: 1000 mm - maks. debelina lepljenih elementov: 100 mm - dimenzije (d/š/v): 3000x1300x1650 mm - teža: približno 600 kg Dcjdpfx Acjy T Rdye Njh PREDNOSTI – dve delovni polji – dolžina lepljenja 3000 mm – nebarvana – mobilna – na kolesih – rabljena stiskalnica, v zelo dobrem stanju Neto cena: 12.900 PLN Neto cena: 3.071 EUR po tečaju 4,20 EUR (Cene se lahko spreminjajo glede na valutna nihanja)

Stanje: rabljeno, Rabljena stiskalnica za prepogibanje pol Dcsdpfoymr S Rex Ac Njh

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Pressing force: 320 t Sheet thickness: 0 mm Stroke rate: 80 strokes/min Dcodpfx Aovwgl Njc Neh Total pressing force: 320 t Stroke: 30 – 80 mm Clamping surface (lower table): 630 x 740 mm Clamping surface (upper table): 630 x 630 mm Total power requirement: 60 kW This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in an as-new condition with a new CE marking. MAIN RAM Total force (nominal): 320 t Stroke min.: 30 mm Stroke max.: 80 mm V-RING Nominal force: 160 t Stroke: 30 mm COUNTER RAM Nominal force: 80 t Stroke: 30 mm TOOL DIMENSIONS Lower table width: 630 mm Lower table depth: 740 mm Upper table width: 630 mm Upper table depth: 630 mm Max. daylight: 320 mm ELECTRICAL SPECIFICATIONS Total power consumption: 60 kW

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, New machine 2 years warranty Available in 4 different variants, knife heads also interchangeable Dsdpfx Acoivdncj Nsch Advantages: + unbeatable price-performance ratio + standard equipment: mobile machine, ideal for fast floor cleaning + segment knives made of stainless steel + quick-change, coated knife head + one machine can accommodate up to 4 different knife heads + extremely wide weight range (16 g - 400 g round moulded possible!) + uniform dough division, excellent round moulding of dough pieces + pressing shut-off via push button + ergonomic knife cleaning position (head can be swiveled 90 degrees forward) + programmable pressing shut-off, pressing time and rounding time + digital display, 10 programs can be saved + easy and quick adjustment of rounding chamber height + side holder for rounding plates, immediately accessible STANDARD accessories: 3 rounding plates included General technical data: Power: 1.3 kW Connection values: 400V - 3Ph - 50Hz Fusing: 16A-CEE plug Dimensions: 60 x 63 x 175 cm (WxDxH) Net weight: 380 kg Size 4-14: Number of pieces: 14 dough pieces Piece weight: 130 - 400 grams (depending on dough) Dough input: 1,820 - 5,600 grams (depending on dough) Optionally available: - Additional rounding plates Surcharge: €115.00 net / pc - Additional knife head (incl. 3 rounding plates) Surcharge: €1,840.00 net / set

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, New machine 2-year warranty Available in 4 different versions, cutter heads also interchangeable Advantages: Djdpfjivdm Uex Ac Nsch + Unbeatable price-performance ratio + As standard: mobile machine, ideal for fast floor cleaning + Partially stainless steel dividing knives + Quickly interchangeable, coated cutter head + Up to 4 different cutter heads can be used with one machine + Extremely wide weight range (round-moulded from 16 g to 400 g possible!) + Even dough dividing, excellent rounding quality + Rounding operation can be switched off at the push of a button + Ergonomic knife cleaning position (head can be swivelled 90 degrees forward) + Rounding operation, pressing time, and rounding duration can be programmed + Digital display, 10 programs can be saved + Quick and easy adjustment of rounding chamber height + Side holder for rounding plates, always within reach INCLUDED standard accessories: 3 rounding plates General Technical Data: Output: 1.3 kW Connection values: 400V - 3Ph - 50Hz Fuse: 16A-CEE plug Dimensions: 60 x 63 x 175 cm (WxDxH) Net weight: 380 kg Size 3-52: Number of pieces: 52 dough pieces Piece weight: 16 – 45 grams (dough dependent) Dough input: 832 – 2,340 grams (dough dependent) Optional available: - Additional rounding plates Surcharge: €115 net / pc. - Additional cutter head (incl. 3 rounding plates) Surcharge: €1,840 net / set

Stanje: rabljeno, 2-Station Notching and Press Brake Machine EUROMAC Type Multi 220/6R Press Brake, Notching Machine Serial No. M11941298 Year of Manufacture: 1998 Cutting Capacity: 6 mm steel at 45 kg/mm² 4 mm for stainless steel Station I (Notching) Notching angle: 60° to 140° (with special blade from 30° to 140°) Blade length: 220 mm Table size: 950 x 640 mm - Manual angle adjustment via handwheels - Notching angle with installed blade set: 60° to 140° - Hydraulic clamping of upper and lower blades Dodjmck Ryspfx Ac Nech - Automatic cutting clearance adjustment - Sheet hold-down device - Integrated, scaled measuring tapes in the table - Adjustable stop rails with angle setting - Operated by foot pedal Station II (Press Brake Unit) Pressing force: 18 t Table size: 950 x 340 mm Working height: 1100 mm - Infinitely variable stroke speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible die with 4 x 90° prism, length = 415 mm - Top tool 90°, length = 415 mm Motor power: 4 kW Power connection: 400 Volt, 50 Hz Space requirement (L x W x H): 1150 x 1050 x 1460 mm Weight: approx. 1000 kg Good condition

Stanje: rabljeno, Leto izdelave: 1995, obratovalne ure: 5.132 h, Press system with ACP 1500 and APEX 1600, capacity: approx. 14 t/h Continuous operation with integrated pomace post-extraction to increase yield Compac Press Type: ACP 1500, belt width 1,500 mm, press length approx. 4,515 mm, width: 2,440 mm, and height approx. 2,180 mm. Press belt / sieve belt Mash feed hopper, juice collection trays Pneumatic cylinders for belt tension, pneumatic control, piping Belt cleaning with rotating brush roller and belt scraper blade; Mash pump Type: AMP 580, compact-design progressive cavity pump Press system with APEX 1600 For the production of fruit juice with especially high yields, equipped with an integrated pomace post-extraction system Dodjw Hxrlepfx Ac Noch Footprint: 3,500 mm x 2,500 mm, including:

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, številka stroja/vozila: 211/91/1, Funkcionalnost: popolnoma funkcionalen, vhodni tok: 16 A, vhodna frekvenca: 50 Hz, širina mize: 750 mm, dolžina mize: 2.700 mm, skupna dolžina: 3.650 mm, skupna širina: 850 mm, skupna višina: 2.300 mm, skupna masa: 2.200 kg, dvižna višina: 1.350 mm, delovna širina: 750 mm, dolžina obdelovanca (maks.): 2.500 mm, širina obdelovanca (maks.): 750 mm, višina obdelovanca (maks.): 1.300 mm, vrsta nastavitve višine: električni, potrebna višina: 2.300 mm, zahteva za prostor dolžina: 3.650 mm, potrebna širina: 950 mm, delovna dolžina: 2.500 mm, - Lamelna stiskalnica za ohišja - Delovno območje: - Širina od 150 do 2.500 mm, višina od 150 do 1.300 mm; globina 750 mm; - 2200 daN (kg) - Zmogljivost nastavljiva na 85 % + 70 %. Dodpfx Acoyx Habj Njch - Zelo robusten stroj

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0303, stiskalna sila: 160 t, dolžina mize: 550 mm, širina mize: 500 mm, delovna višina: 700 mm, Vulcanizing Press – Manufacturer Hidrobrasil – 160 t Heated Press For sale is a hydraulic vulcanizing press manufactured by Hidrobrasil, offering a maximum pressing force of 160 t. This machine features heated platens measuring 550 × 500 mm, a daylight opening of 700 mm, and a stroke of 400 mm, making it especially suitable for vulcanization, lamination, and thermal pressing processes in rubber and plastics processing. ==== Technical Data & Information: Vulcanizing Press Hidrobrasil – Heated Press ==== General Information - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Type: Heated press / vulcanizing press - Pressing force: 160 t - Machine weight: approx. 4.2 t - Dimensions (L × W × H): 950 × 2,440 × 2,400 mm ==== Working Area - Daylight opening: 700 mm - Stroke / Travel: 400 mm - Table height above floor: 850 mm ==== Table and Ram - Table platen: 700 × 600 mm - Ram platen: 700 × 600 mm ==== Forces - Return force: 16 t ==== Speeds - Approach speed: 10 mm/s - Pressing speed: 10 mm/s - Rapid traverse speed: 10 mm/s - Return speed: 25 mm/s ==== Hydraulics - Motor power: 15 kW - Oil tank: 300 l - Electric oil cooling: 1.5 kW ==== Heating System - Heating platen size: 550 × 500 mm - Electrically heated up to 200°C - Heating power: approx. 12 kW - Temperature sensors: 2 per heating plate - Temperature accuracy: ± 3°C in the 500 × 450 mm area - Heating platen manufacturer: ELKOM - Top and bottom platens separately controllable - Adjustable heating time - Automatic opening after heating time (optional) ==== Ejector System - Ejector size: 30 × 30 mm - Ejector stroke: 150 mm - Ejector force: 15 t - Ejector speed: 25 mm/s - Number of ejectors: 1 ==== Equipment - Swiveling two-hand operation - Interior lighting - Pressure adjustment via rotary knob (10 steps) - Heating plates with T-slots (DIN 650, customer-specific) - Thermal insulation between heating plates and machine body ==== Options - Light curtains at front and rear: €6,800 - Rear monitored double door: €2,400 - Right side monitored door: €1,200 - Left side monitored door: €1,200 ===== Vulcanization, rubber processing, plastics processing, lamination processes, compression molding, thermal pressing, hot pressing Dcodpfxsfxyh Rs Ac Neh Vulcanizing press, heated press, hydraulic press, rubber press, lamination press, compression press, thermo press, tryout press, tool tryout press Looking for a hydraulic press customized to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German Machinery Directive as well as the European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Moreover, our presses exceed Canadian and European safety requirements, as they comply fully with the national Brazilian safety guideline NR 12, which builds upon these standards. Our core strength lies in special machine construction and press automation. We offer customized hydraulic presses at surprisingly competitive prices. Only components from leading European manufacturers are used in the press hydraulics.

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0325, stiskalna sila: 40 t, Tryout Press – Manufacturer Calende – 40 t For sale is a tool tryout press from the manufacturer Calende with a maximum pressing force of 40 t. The machine features a bolster and ram plate each measuring 1,320 × 600 mm, a maximum working height of 700 mm, and is ideally suited for tool adjustment, assembly, and tryout work in tool and mold making. ==== Technical specifications & information: Tryout Press Calende – Tryout Press ==== General Information - Manufacturer: Calende - Model: Tryout Press - Design: Tool Tryout Press Dcedpfx Acofxykwe Noh - Pressing force: 40 t - Machine weight: approx. 3.5 t - Dimensions (L × W × H): 2,065 × 700 × 2,905 mm ==== Working Area - Passage width: 1,000 mm - Max. working height: 700 mm - Stroke: 400 mm - Table height above floor: approx. 750 mm ==== Table and Ram - Bolster plate: 1,320 × 600 mm - Ram plate: 1,320 × 600 mm - Column diameter: 100 mm ==== Forces - Return force: 4 t ==== Speeds - Approach speed: 10 mm/s - Pressing speed: 10 mm/s - Rapid traverse speed: 10 mm/s - Return speed: 25 mm/s ==== Hydraulics - Motor output: 8 kW - Oil tank: 200 l - Electric oil cooling: 1.5 kW ==== Options - Hydraulics and tank mounted on top of the press: €2,400 - Surrounding maintenance platform: €3,600 - Siemens S7-1200 control: €4,600 - Floor tray made of painted steel: €850 ===== Tool adjustment, tryout work, tool assembly, mold making, tool making, press tool inspection, tryout operations Tryout press, tool tryout press, tool adjustment press, try-out press, press for tool testing, hydraulic press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized quote. Our hydraulic presses are built in compliance with German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety standard NR 12, which is based on these regulations. Our core competence lies in special-purpose machine construction and press automation. We offer custom-built hydraulic presses at surprisingly affordable prices. For the presses' hydraulics, we predominantly use components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0277-Rev06, stiskalna sila: 10 t, Hidrobrasil vulcanizing press – 10 t – heating press – 660 × 210 mm – with heated plates For sale is a hydraulic vulcanizing press manufactured by Hidrobrasil with a pressing force of 10 t. The machine is designed for thermal processes such as vulcanization and hot-pressing applications, and features precisely guided heated plates as well as long-term pressure consistency. Thanks to its safety monitoring and robust construction, the press is ideally suited for reliable use in both laboratories and production environments. ==== Technical Data & Information: Hydraulic Vulcanizing Press – 10 t ==== General Information - Manufacturer: Hidrobrasil - Model: Vulcanizing Press Dcsdpfx Acsffamyo Noh - Machine description: Heating press - Design: Single-column/column-type press - Pressing force: 10 t - Machine weight: approx. 1.5 t - Dimensions (L × W × H): approx. 2,000 × 1,420 × 760 mm ==== Working Area - Column clearance: 200 mm - Open height between heated plates: 200 mm - Stroke: 200 mm - Travel path: 200 mm ==== Heated Plates & Structure - Heated plates: 660 × 210 mm - Table height: 1,100 mm - Table plate thickness: 125 mm - Ram height: 250 mm - Plates ground flat (includes thermal insulation plates and clamping surfaces) ==== Construction & Guidance - Polished, chrome-plated guide columns - Parallel guidance through 250 mm bronze bushings - Counterweight system for smooth door operation ==== Process Parameters - Pressure consistency: up to 5 hours - Pressure tolerance: max. ± 5 % ==== Hydraulics - Oil tank: 70 l ==== Safety & Operation - Electronic door monitoring - Interlock: Ram movement only possible with door closed - Overheat protection for plate temperatures >50 °C - Manual override with safety release ("Burn risk" warning) ===== Vulcanization, hot pressing, thermal processes, laboratory applications, material testing Hydraulic press, vulcanizing press, heating press, laboratory press, production press, industrial press Looking for a hydraulic press tailored to your requirements? Contact us for an individual quote. Our hydraulic presses are manufactured according to German Machinery Directive, as well as European Machinery Directive (Directive 2006/42/EC), EC norms, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety standards, as they fully comply with the national Brazilian safety guideline NR 12, which is based on these standards. Our key strength lies in custom machine building and press automation. We supply tailor-made hydraulic presses at surprisingly affordable prices. For the hydraulic systems, we primarily use components from leading European manufacturers.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: W202001, dolžina mize: 800 mm, širina mize: 550 mm, Oprema: dokumentacija / priročnik, H-Press – 30 t – Double Column Press – 800 × 550 mm – Versatile Assembly & Production Press For sale is a hydraulic double column press (H-frame press) with 30 t pressing force. The machine is highly versatile and can be used as an assembly press, small batch press, manual loading press, vulcanizing press or heating press. It is an approximately 2.5-year-old, unused machine with zero operating hours, offered with full warranty. Viewing is possible at our Ennepetal warehouse. Djdpfx Aou U Ey Ijc Nsch ===== Technical Data & Information: Hydraulic Double Column Press – 30 t ==== General Specifications - Design: Double column press (H-frame) - Pressing force: 5–30 t (adjustable) - Machine weight: approx. 2,000 kg - Paint finish: RAL 7035 (light grey) / RAL 2009 (orange) ==== Working Area - Table size: 800 × 550 mm (also available as 700 × 500 × 70 mm variant) - Ram plate: 700 × 500 × 80 mm - Max. distance table/ram: 500 mm - Stroke: 500 mm - Open width front: 820 mm - Table height: 800 mm ==== Speeds - Advance speed: approx. 45–50 mm/sec - Return speed: approx. 40–55 mm/sec ==== Hydraulics - Operating pressure: up to 300 bar - Hydraulic pump: ASC, 28.5 l/min - Motor power: 11 kW - Oil tank: approx. 100 l - Valves: Bosch Rexroth ==== Construction & Guide System - Cylinder: Ø 110 mm (piston), Ø 70–75 mm internal - Guide columns: Ø 50 mm - Ram guided by 2 guide columns - Robust machine frame - Protective cladding, rear and sides enclosed ==== Control & Operation - Pressing force adjustable via rotary control - Adjustable two-hand control (3 m power cable) - Position limit via cam switch - Stroke limit via adjustable sensors - Automatic positioning to defined stroke points - Resettable piece counter ==== Safety - Light curtain 500 mm (14 mm resolution, finger protection) - Reach-under protection - Optional reach-over protection - Emergency stop switch - Safety inspection with certificate ==== Features - Electrical cabinet components from leading brands - Illumination in working area - Ejection chute in table ==== Options - Heating plates: 500 × 500 mm (up to 200 °C, with controller & timer) - Commissioning & training ==== Delivery Time & Service - Delivery time: approx. 6 weeks (excluding heating plates) - Heating plates: approx. 8 weeks - Customer service: Dresden, Hamburg, Ennepetal, Waibstadt, Göppingen, Gelsenkirchen ===== Assembly works, small batch production, forming processes, vulcanizing, hot pressing Hydraulic press, hydraulic press, double-column press, H-frame press, assembly press, small batch press, vulcanizing press, heating press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German and European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they meet all aspects of the Brazilian national safety regulation NR 12, which builds upon these standards. Our major strength is special machine construction and press automation. We supply custom-made hydraulic presses at surprisingly affordable prices. For the hydraulics, we primarily use components from leading European manufacturers.

Leto izdelave: 2020, stanje: skoraj kot novo (rabljeno), stiskalna sila: 150 t, Hidralmac salt press – 150 t – mineral lick block press – stainless steel contact surfaces For sale is a hydraulic mineral block or salt press from Hidralmac with a pressing force of 150 t. This machine is specifically designed for the production of salt and mineral blocks, featuring stainless steel contact surfaces for hygienic and corrosion-resistant processing. Thanks to its robust construction and optional extensions, it is suitable for continuous industrial operation. ==== Technical specifications & information: Dcsdjdxvfiopfx Ac Neh Hydraulic salt press – 150 t ==== General information - Manufacturer: Hidralmac - Model: Mineral Block Press - Machine designation: Salt Press - Type: Hydraulic production press - Pressing force: 150 t - Machine weight: approx. 8.5 t - Dimensions (L × W × H): 1,200 × 1,800 × 3,100 mm - Motor power: 10 kW - Steel quality: Structural steel LCG ASTM A36 ==== Working area - Max. working height: 1,000 mm - Stroke: 500 mm - Table height above floor: 1,000 mm ==== Speeds - Approach speed: max. 9.9 mm/sec - Pressing speed – up to 100 t: 9.9–0 mm/sec - Return speed: 25 mm/sec ==== Hydraulics & Technology - Hydraulic tank: 500 l - Oil capacity: approx. 400 l - Column diameter: 230 mm, chrome-plated - Lubrication: manual, via grease nipples ==== Construction & features - All product-contacting parts made of stainless steel - Robust design for salt and mineral processing - High corrosion resistance - Maintenance-friendly construction ==== Options (on request) - Perimeter maintenance platform - Closed side panels (left/right/rear) - Light curtains at the front (increased speed) - Speed increase option - Siemens S7-1200 control with 12" display - Pilz safety technology ===== Salt production, mineral block manufacturing, chemical industry, compacts, series production Hydraulic press, salt press, mineral block press, production press, industrial press, press system Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they comply fully with the Brazilian national safety standard NR 12, which builds upon these standards. Our core strength is special-purpose machine construction and press automation. We offer custom hydraulic presses at surprisingly competitive prices. For the hydraulics, we primarily use components from leading European manufacturers.

Leto izdelave: 2020, stanje: delavnici obnovljeno (rabljeno), stiskalna sila: 400 t, številka stroja/vozila: DF0317, Hidralmac Mineral Block Press – 400 t – Salt Press – 600 mm Clearance – with Conveyor Belt For sale is a hydraulic mineral block press manufactured by Hidralmac, offering 400 tons of pressing force. This machine is specially designed for the production of salt and mineral block products and features an integrated conveyor belt for efficient material flow. Due to its robust construction and stainless steel components in product-contact areas, the press is ideally suited for continuous industrial operation. ==== Technical Data & Information: Hydraulic Mineral Block Press – 400 t Djdjd E Irhjpfx Ac Noch ==== General Information - Manufacturer: Hidralmac - Model: Mineral Block Press - Machine Name: Salt Press - Design: Four-column press - Pressing Force: 400 t - Machine Weight: approx. 14 t - Dimensions (L × W × H): 2,380 × 1,680 × 3,580 mm - Motor Power: 36 kW ==== Working Area - Clearance Width: 600 mm - Max. Working Height: 750 mm - Stroke: 400 mm - Travel Path: 500 mm ==== Table & Construction - Column Diameter: 230 mm - Return Force: 40 t - Steel Grade: Machine construction steel LCG ASTM A36 (DIN 8651) - Product Contact Parts: Stainless steel ==== Speeds - Approach Speed: max. 10 mm/sec - Pressing Speed: 10 mm/sec - Rapid Traverse: 25 mm/sec ==== Hydraulics & Peripheral Equipment - Oil Tank: 600 l - Oil Cooling: 1.5 kW - Conveyor Belt: 6 m length ==== Control - Monitor: WEG, 12 inch ===== Salt block pressing, mineral block production, pressing processes, industrial manufacturing Hydraulic press, mineral block press, salt press, production press, industrial press, forming press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customised offer. Our hydraulic presses are manufactured according to German Machinery Directives, as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the national Brazilian safety standard NR 12, which builds upon these. Our core competency lies in custom machine construction and press automation. We supply bespoke hydraulic presses at surprisingly competitive prices. For the hydraulic systems of our presses, we predominantly use components from leading European manufacturers.

Stanje: novo, številka stroja/vozila: DF0238 - Rev.00, stiskalna sila: 20 t, Vulcanizing Press – Manufacturer Hidrobrasil – 20 t Heated Press For sale is a compact hydraulic vulcanizing press made by Hidrobrasil with a maximum pressing force of 20 t. The machine features heated platens measuring 400 × 400 mm, precisely controllable temperature up to 300 °C, as well as a modern Siemens control system, making it ideally suited for small-scale vulcanization, laboratory, and thermal pressing processes. ==== Technical Data + Information: Hidrobrasil Vulcanizing Press – 20 t Heated Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Type: Heated Press / Vulcanizing Press - Pressing Force: 20 t - Machine Weight: approx. 3 t - Dimensions (L × W × H): 2,200 × 650 × 2,540 mm ==== Working Area - Opening Width: 400 mm - Daylight: 300 mm - Stroke: 300 mm - Table Height Above Floor: approx. 950 mm ==== Table and Ram - Table Plate: 400 × 400 mm - Ram Plate: 400 × 400 mm ==== Forces - Pressure Adjustment: 2 – 20 t (in 2 t increments) Dodpfefxyhbex Ac Nsch ==== Hydraulics - Drive Power: approx. 4.5 kW - Electric Oil Cooler - Pressure Hold Accuracy: ± 5 % - Cooling via integrated circulation pump (connection for external water supply) ==== Heating System - Electrically heated platens - Temperature Range: 50 – 300 °C (in 5 °C increments) - Temperature Tolerance: ± 5 °C - Heating plates independently controllable ==== Control System - Siemens S7-1500 - Adjustable: pressure, speed, temperature, heating time, holding positions - Adjustable venting intervals - Data acquisition and export in Excel file format ==== Features - Automatic vertical door - Hot air extraction with 150 mm connection and fan - Integrated machine monitoring systems ==== Options - Integrated cooling unit: €15,000 ===== Vulcanization, rubber processing, plastics processing, laboratory applications, small batch production, thermal press processes, hot pressing Vulcanizing press, heated press, hydraulic press, laboratory press, rubber press, laminating press, thermo press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized quote. Our hydraulic presses are built in accordance with German machinery directives, European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they comply with all aspects of the Brazilian national safety standard NR 12, which builds upon these regulations. Our core strength is in special-purpose machine engineering and press automation. We offer customized hydraulic presses at surprisingly competitive prices. The hydraulic systems of our presses are predominantly fitted with components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2017, stiskalna sila: 150 t, številka stroja/vozila: DF0149, Hidralmac Concrete Pipe Press – 150 t – 2,050 × 965 mm – Double Cylinder For sale is a hydraulic concrete pipe press from manufacturer Hidralmac, offering a total pressing force of up to 150 t (2 × 75 t). This machine is specifically designed for the production and processing of concrete pipes and is distinguished by its robust construction, precise control, and high process reliability. Thanks to its heavy-duty components and well-engineered design, it is ideally suited for continuous industrial operation. ==== Technical Data & Information: Hydraulic Concrete Pipe Press – 150 t ==== General Specifications - Manufacturer: Hidralmac - Model: Concrete Press - Machine Type: Concrete Pipe Press - Design: Double Cylinder Press - Pressing Force: 2 × 75 t / total 150 t - Machine Weight: approx. 6.5 t - Total Power Requirement: Main Motor 22 kW + Auxiliary Consumers 2 kW - Space Requirement: approx. 1,500 × 1,025 mm ==== Working Area - Pass-through Width: 2,050 × 965 mm - Window Size: approx. 2,050 × 965 mm - Max. Open Height: 1,600 mm - Stroke: 800 mm - Cylinder Travel: 350 mm ==== Table & Ram - Upper Ram: approx. 870 × 350 × 150 mm - Lower Ram: approx. 1,500 × 600 × 150 mm - Lower Ram Stroke: 150 mm - Upper Ram Stroke: 150 mm - Base Plate: 1,500 × 1,025 × 75 mm - Head Plate: 1,500 × 1,025 × 150 mm ==== Speeds - Pressing Speed: 0–15 mm/sec - Lifting Speed: 100 mm/sec ==== Hydraulics & Technology - Oil Tank: 350 l - Oil Requirement: approx. 320 l Dedpfx Aed Aftpsc Nech - Column Guide Diameter: 120 mm - Piston Diameter: 80 mm - Positioning Accuracy: approx. 0.5 mm (non-contact sensors) ==== Construction & Features - Heavy-duty steel structure with reinforced rams (each 150 mm) - Columns guided by bronze bushings for high stability - 72 mm thick steel base plate for tipping safety - Hydraulic unit and tank integrated in the lower section - Oil cooler mounted on the press - Control cabinet with air cooling - Removable rear interior panel for maintenance ==== Safety & Operation - Two-hand control (permanently mounted, pivot-mounted) - High-resolution light curtains - Transparent acrylic safety windows (6 mm) - LED workspace lighting ===== Concrete processing, pipe manufacturing, heavy-duty presses, series production, construction industry hydraulic press, concrete press, concrete pipe press, industrial press, production press, double cylinder press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in compliance with German machinery directives as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply in all respects with the national Brazilian safety directive NR 12, which builds upon these standards. Our strength lies in special machine construction and press automation. We supply customized hydraulic presses at surprisingly competitive prices. Only components from leading European manufacturers are used in the hydraulic systems of our presses.

Stanje: pripravljen za uporabo (rabljen), DIXI 60SLD is a semi-automatic baling system with a pressing force of 60 tons, designed for the economical volume reduction of recyclable residual materials in industrial and craft settings: - Cardboard boxes - Foam - PET bottles - Insulation mats - and other baled materials. Horizontal baler, waste press DIXI 60 SLD with tipper Technical specifications: - Pressing force: 60 tons Dcedpfx Asra A E Usc Neh - Specific pressure: 6.81 kg/cm² - Power supply: 400V / 7.5kW - Bale dimensions: 800x1100x1200 mm - Number of bindings: 3 - Bale weight: approx. 370-410 kg - Binding: manual - Loading aperture: 990 x 1110 mm - Machine weight: 5,420 kg - Average pressing cycle: 47 sec - Year of manufacture: 2011-2016 Dixi 80SLD baler Technical data of the baler: Brand: Dixi Model: 80 SLD Pressing force: 80 tons Drive power: 11 kW, 400 V / 32 A Filling opening (W x H): 1040 x 1110 mm Pressing cycle: approx. 35 s Throughput: approx. 1,000 kg/h Bale size (W x H x L): 1120 x 1120 x 1200 mm Bale weight: Depending on material, approx. 500–600 kg Bale tying: triple, manual Machine dimensions: - Length: 4,200 mm (+ cage 1,600 mm) - Width: 1,830 mm - Height: 2,620 mm - Machine weight: approx. 8,000 kg Automatic bale ejection Robust construction ensures long-term operation Year of manufacture: 2016-2020 Weight: approx. 8.4 tons Condition: Used

Stanje: rabljeno, Leto izdelave: 1979, Površina stiskanja: 2200 mm x 1100 mm Odpiranje: 360 mm Ogrevanje: električno Površina plošč: aluminij Zasilna zaustavitev: ne Tlak stiskanja: 65 t Število cilindrov: 4 Poraba toka: 21 A Dolžina stroja: 2500 mm Širina stroja: 1300 mm Teža: 2600 kg Dcodpfsy A Hkbex Ac Neh

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 46131, Površina za vtiskanje s grelno glavo: HKAC maks. 100 x 125 mm // HKBC maks. 140 x 230 mm Pritisk vtiskanja pri 6,5 bar s: 1 valj cca 400 daN (kp) // 2 valja cca 800 daN (kp) Hod nastavljiv glede na vir tlaka: 0-40 mm / 0-100 mm Maksimalna višina prehoda brez/z drsno mizo: 300 mm / 275 mm Podajanje folije nastavljivo: 0-230 mm Maksimalna širina folije: 140 mm Napetost gretja: 220 V / 50 Hz Grelna moč z grelno glavo: HKAC 540 W // HKBC 900 W Merjenje temperature s: Fe-Co Maksimalna zmogljivost, taktov na uro: cca 4000 Djdpfxox I Nfrs Ac Noch

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), Na voljo sta 2 popolna sistema precizijskih stiskalnic. Tlačna sila: 220kN, hod: 100/12mm, delovni tlak: 3/6bar, držalo orodja X/Y: ca. 350mm/300mm, varnostna razdalja: 355mm, čas zaustavljanja: 0,07s, upravljanje SCHMIDT PressControl 500: tip upravljanja: PRC 500, vključno z upravljalnim panelom z zaslonom in tipkovnico, dvoročni zagon po EN 574 tip III B. Dodatki: strojni okvir z integrirano varnostno napravo BGR 500, teža stroja: 800kg, ogled možen po dogovoru. Dodpey S A I Usfx Ac Noch

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, leto zadnje generalne obnove: 2023, EN: For sale: a complete and operational steel sheet roll forming line for coil material such as Magnelis, configurable for various profiles (e.g., C-type) used in photovoltaic installations and farms, steel structure halls, shelters, as well as in furniture manufacturing, etc. The line, including decoiler, is installed in a heated hall under near-laboratory conditions. It is possible to run a test operation before purchase. I have contacts for companies supplying custom profiling roller sets for specific profiles and for firms specializing in machine upgrades and expansions. Dsdpfx Acju A U Ute Nsch For more information, please call. I do not respond to written messages. A VAT invoice will be issued for the production line.

Stanje: dober (rabljeno), Leto izdelave: 2007, GRIGGIO Model TYP NPC/A 30/19 AF-BO S.N. B3720207 Dcedoyk Dnfepfx Ac Noh Pretočna stiskalnica za lepljenje naravnega furnirja, laminata ipd. Širina delovnega polja: 1830 mm Maksimalna dolžina: 3010 mm Cena vključuje lepilne valje Osama S4 R/P-2000.