Pme Ekscentrični Tisk nakup rabljenega (4.888)

Stanje: dober (rabljeno), Koda: 0478 Ijdpfxozz Szaj Ah Uotn Znamka: ITALPRESSE Model: V/2 Mehanska stiskalnica za hladno lepljenje Opremljena z motorjem, ki se upravlja s stikalom z avtomatskim povratkom. To stikalo nadzoruje gibanje premične plošče proti ploščam ali stran od njih, medtem ko se zahtevani pritisk in sprostitev nadzorujeta z ročnim kolesom, ki je nameščeno na strani stiskalnice. Ta sistem omogoča največji pritisk z minimalnim naporom. Dimenzije plošče: 2200 x 1000 mm Odprtina: 650 mm Število pritiskalnih vijakov: 2 Nameščena moč: 0,75 KM Celotne dimenzije: 2550 x 1000 x 1650 mm (višina) Teža: 750 kg

Stanje: pripravljen za uporabo (rabljen), Siemens C8451-A10-A4-3 / SPM-E14-A51P1, used, normal signs of wear, 100% functional, scope of delivery as per photos Itjdpfxezzhp Te Ah Ujn

Stanje: rabljeno, Leto izdelave: 1961, Rabljen stroj Oprema in tehnični podatki: Velikost pritiskalne površine 2500 x 1300 mm Stroj je v razstavljivi izvedbi Skupna pritiskna sila 60 t Itjdezyy Apspfx Ah Ujn Specifična pritiskna sila 1,85 kg/cm² Razdalja med ploščami 350 mm Dolžina x širina x višina približno 3230 x 1340 x 1775 mm Razpoložljivost: v kratkem času Lokacija: Porenje-Pfalška

Stanje: dober (rabljeno), Leto izdelave: 2011, Stanje: rabljeno, delovno Robustna konstrukcija okvirja in pritiskalne nosilce zagotavljajo natančno sestavo in lepljenje okvirja. Pritisna naprava zagotavlja natančno pravokotnost in preprečuje deformacijo ali upogib okvirja. Zaradi dolgega giba hidravličnih cilindrov je potrebno manj pogosto prilagajanje spodnjega nosilca in pritrdilnih čeljusti. Spodnji nosilec ima avtomatsko dvigovanje in zaklepanje. Tehnične specifikacije: • Največja velikost okvirja: 3000 × 2000 mm • Najmanjša velikost okvirja: 250 × 340 mm • Moč hidravlične črpalke: 3 kW • Največja skupna pritiskna sila na vodoravnih in navpičnih nosilcih: 19 ton • Gib hidravličnega cilindra v navpični smeri: 1100 mm • Gib hidravličnega cilindra v vodoravni smeri: 1200 mm • Spodnji nosilec, nastavljiv na tri višine: 380, 680 in 980 mm • Nastavljiv pritisk v navpični in vodoravni smeri • Dve vodoravni omejevalni plošči s sistemom za hitro nastavitev • Vodoravne in navpične gibe nadzorujejo ventili, ki se upravljajo z ročico in so nameščeni na okvirju stroja • Izvedba v skladu s standardom CE • Ročna upravljalna enota s pritiskovnimi gumbi Specifikacije so navedene samo za informativne namene. Itsdpfx Ahjzlyv Ts Usn Ta stroj je ponujen v prodajo v imenu stranke. Ogled je možen po predhodnem dogovoru. Za dodatne informacije in ustrezne kontaktne podatke se obrnite na nas preko sistema za sporočila na platformi.

Stanje: rabljeno, Rabljen elektronski in regulacijski modul proizvajalca SMA Regelsysteme za industrijske krmilne in avtomatizacijske sisteme. Proizvajalec: SMA Regelsysteme Model: PME03F-00:011211 Itjdpfxszfi Tbo Ah Uon Tip naprave: procesorski modul / krmilni modul Področje uporabe: industrijska avtomatizacija in regulacijska tehnika Način montaže: vgradnja v električno omaro Stanje: rabljeno Količina: 8 kosov.

Stanje: rabljeno, Leto izdelave: 2023, Tlak 320 t Dolžina upogiba 6050 mm Razdalja med stojali 5100 mm Hod 350 mm Vgradna višina 650 mm Skupna poraba moči 30 kW Masa stroja približno 22.500 kg Potreben prostor približno 7000x2300x3200 mm Stroj je v stanju, kot da je nov. Dodatna oprema/oprema: - Krmilnik ESA S 875 PC - 4 nastavljive oporne roke pred strojem Itsdpfxozvq Eas Ah Uen - 2 ročno nastavljiva oporna prsta - Svetlobna pregrada pred strojem - Nožni stikalo - Oblikovanje (bombiranje) - Stranska zaščitna vrata - Krmljene osi: y1, y2, x, R, z1, z2. - 1 komplet zgornjih in spodnjih orodij - Stroj je v stanju, kot da je nov.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 280 kW (380,69 KM), vrsta goriva: električni, barva: drugo, Leto izdelave: 2026, *Vsi naši izdelki so izdelani z največjo skrbnostjo in so kriti z 1-letno garancijo! *Montaža in usposabljanje operaterja BREZPLAČNO TEHNIČNE SPECIFIKACIJE: Iedpfxezhi T Ho Ah Ujtn - Proizvodna zmogljivost: 200–450 ton na uro - Tip in velikost drobilnika: Turbo udarni drobilnik – 1200x1200mm - Največja vstopna velikost: 700mm - Skupna moč motorjev: 280 kW MIC-120 je kombinacija: • Zalogovnik • Vibracijski podajalnik z rešetko (bypass) • Turbo udarni drobilnik • Zložljivi bypass in skladiščni transportni trakovi • Hidravlične podpore • Mobilno ogrodje z osmi in gumami • Popolnoma avtomatiziran sistem • Ploščadi za enostavno vzdrževanje • Diesel generator (opcijsko) ZA DODATNE INFORMACIJE NAS PROSIMO POKLIČITE!

Stanje: rabljeno, Leto izdelave: 1999, barvni kanali: 2, Heidelberg SM 74-2 P. - Letnik 1999; - 57 milijonov natisov; - vlaženje z alkoholom, z Baldvinovim sistemom; - pranje valjev za barvo; - pranje gumijastega in cilindričnega valja; - zračni nož; - sistem za nanos prahu; - perfektor (2+0; 1+1); - brez poškodb na cilindrih. Iodpfx Aezlgpyoh Ustn

Stanje: dober (rabljeno), Koda: 0421 Znamka: ORMAMACCHINE Model: NPC – v skladu s standardom CE Vroča preša z ogrevanjem s termičnim oljem za obdelavo lesa, mizarstvo, pohištvo, izdelavo pohištva po naročilu, plošč, vrat, kompozitnih materialov in drugih materialov – v skladu s standardom CE Iedpfx Ajzgtpijh Ujtn Dimenzije plošče: 3000 x 1580 mm Masivne jeklene plošče z ogrevanjem s termičnim oljem Število batov: 6, premer: 85 Odpiranje: 400 mm Ogrevanje plošč z električnim kotlom Potisk: 120 ton Stranski vodniki Plošče, prevlečene s folijo Mylar Celotne dimenzije: 3700 x 1850 x 2600 mm (višina)

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, barvni kanali: 4, Oprema: dokumentacija / priročnik, procesor rastrskih slik, samodejni duplex, V tej ponudbi kupujete rabljeni barvni produkcijski sistem Canon imagePRESS V1000. Predmet prodaje: 1 x Canon imagePRESS V1000 z naslednjo opremo: - Krmilnik Prismasync, skupaj z DocBox in Impose - Zaključevalnik z možnostjo spenjanja Staple Finisher AF1 - Podajalnik papirja Paper Deck E1 - POD Deck XL A2 - Obvodni podajalnik Stack Bypass Ni prava konfiguracija za vaše potrebe? Ni problema! Stroj lahko prilagodimo vašim zahtevam. Kontaktirajte nas! Števci odtisov: - Skupaj: približno 3.800.000 odtisov - Barvno: približno 3.200.000 odtisov - Črno: približno 600.000 odtisov Stanje: Ponudba se nanaša na rabljeno napravo, ki lahko kaže znake uporabe (kot so manjše praske ali razbarvanje). Stroji so popolnoma testirani in so v delujočem stanju. Preizkusni izpisek je viden na fotografijah. Pakiranje in dostava: Ogled stroja je možen v našem delovnem času. Prosimo za predhodno najavo termina. Itsdpezghu Tjfx Ah Uon Morsko varno izvozno pakiranje in dostava po vsem svetu sta možna po dogovoru. Pred dostavo ali prevzemom bo za vašo referenco izveden funkcionalni test, ki ga bomo posneli na video. Za več informacij nas kontaktirajte neposredno. Navedena cena ne vključuje DDV.

Stanje: dober (rabljeno), Koda: 0419 Znamka: ITALPRESSE Model: V/2 Električna stiskalnica za hladno lepljenje vrat, pohištva, plošč, kompozitnih materialov, tehničnih materialov, plastike, aluminija in različnih drugih materialov. Opremljena je z motorjem, ki ga upravlja stikalo z avtomatskim povratkom. To stikalo nadzoruje premikanje premične plošče proti ali stran od obdelovancev, medtem ko sta zahtevani pritisk in sprostitev nastavljiva z ročnim kolesom, ki se nahaja ob strani stiskalnice. Ta sistem omogoča doseganje maksimalnega pritiska z minimalnim naporom. Dimenzije plošče: 2500 x 1200 mm Itsdpfx Ahjzcfdfs Usn Odpiranje: 650 mm Pritrdilna vijaka: 2 kos Vgrajena moč: 0,75 kW Skupne dimenzije: 2850 x 1200 x 1650 mm (V x Š x G) Teža: 880 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, IZVEDENA MODERIZACIJA V LETU 2023 NA HIDRAVLIČNI PRESI Z MOČJO 80 TON IN DOLŽINO 10 METROV. Iodpfxsz A S U He Ah Uetn

Stanje: novo, Condition: new Delivery time: approx. 4 months from order Country of origin: Italy Price: €62,500 Lease rate: €1,181.25 Press force: 150 tons Stroke: 500 mm Itodoynmqkopfx Ah Usn Ram: 800 x 400 mm Table: 900 x 600 mm Installation height: 500 mm Throat depth: 300 mm Rapid traverse: 20 mm/s Working speed: 3 mm/s Motor: 4 kW Length: 2,200 mm Width: 1,500 mm Height: 3,000 mm Weight: 5,500 kg 2-point round guide Table and ram with T-slots Two-hand operation Siemens PLC Pressure gauge Operating manual Optional equipment (prices on request): - 4-point round guide - Light barrier - Siemens control for programming stroke and pressing time - Siemens touchscreen control, stores up to 50 programs, for programming: • Upstroke and downstroke ratio • Dwell time at bottom dead center • Decompression time • Working pressure setting • Piece counter • Press stop in upstroke and downstroke • Setting for manual and automatic operation • Alarm and fault management - Hour meter - Piece counter - Decompression valve - Oil cooler with decompression valve - Pressure switch

Stanje: novo, Condition: new Delivery time: approx. 4 months from order placement Country of origin: Italy Price: €135,000 Leasing rate: €2,551.5 Pressing force: 300 t Stroke: 500 mm Table dimensions: 3,000 x 2,050 mm Installation height: 700 mm Rapid traverse: 20 mm/s Working speed: 2 mm/s Length: 3,100 mm Width: 3,000 mm Height: 2,600 mm Weight: 11,500 kg Cylinder: fixed or horizontally traversable Clear gap between uprights: 2,050 mm Horizontally traversable cylinder travel: 1,300 mm Isdpoynmvajfx Ah Uotn Hydraulically movable uprights: 2,000 mm Horizontally traversable cylinder Hydraulically movable upright Operation via hand lever and control panel Equipment in accordance with CE regulations, operating instructions in GERMAN and ENGLISH OPTIONS: - Worktable welded to the base frame, with surface drilling - Operator panel on swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) - Wireless operator panel (push buttons for press movement, solenoid valves, Siemens CPU) - Siemens control system with touchscreen - Lifting cylinders in the table (6, 8, or 10 pcs.) - Anti-twist device for the piston - 2 speeds for movement of uprights and cylinder - Oil cooler and decompression valve

Stanje: novo, Condition: new Delivery time: approx. 4 months from order Country of origin: Italy Price: €107,000 Leasing rate: €2,022.30 Pressing force: 200 t Stroke: 500 mm Table: 3,000 x 2,550 mm Installation height: 800 mm Rapid traverse: 20 mm/s Working speed: 2 mm/s Length: 3,550 mm Width: 3,000 mm Height: 2,600 mm Weight: 8,500 kg Cylinder: fixed or horizontally movable Clear column width: 2,550 mm Horizontally movable cylinder: 1,900 mm Hydraulically movable frame: 2,000 mm Horizontally movable cylinder Hydraulically movable frame Operation via manual lever as well as control panel Equipment in accordance with CE regulations Operating manual in GERMAN and ENGLISH Iedpjynmvgsfx Ah Ujtn OPTIONS: Worktable welded to the base frame, with holes on the surface Control panel on swinging arm (push buttons for press movement, solenoid valves, Siemens CPU) Wireless control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens touch screen control system Lifting cylinders in the table (6, 8, or 10 pcs) Twist protection for the ram 2 speeds for frame and cylinder movement Oil cooler and decompression valve

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €40,900 Leasing rate: €781.19 Bending length: 2050 mm Max. bending capacity – mild steel: 10 mm Max. plate thickness without pre-bending (at D = 5x top roll): 10 mm Max. plate thickness without pre-bending (at D = 1.5x top roll): 8 mm Max. plate thickness with pre-bending (at D = 5x top roll): 8 mm Max. plate thickness with pre-bending (at D = 1.5x top roll): 6 mm Top roll diameter: 200 – 220 mm Lower roll diameter: 200 – 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4400 mm Width: 1150 mm Height: 1250 mm Weight: 3950 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, lower roll driven by gears and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Iedpfxsynmyfe Ah Uetn Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONE BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length may be a maximum of 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Iedpfxeynm Ams Ah Ustn Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €127,400 Leasing rate: €2,407.86 Pressing force: 220 tons Bending length: 4050 mm Axes: Y1 / Y2 / X and R axis Stroke: 265 mm Distance between uprights: 3600 mm Throat depth: 410 mm Installation height: 530 mm Drive concept: hydraulic Rapid traverse Y-axis: 200 mm/s Working speed Y-axis: 12 mm/s Return speed Y-axis: 180 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Length: 5250 mm Width: 1770 mm Height: 2900 mm Weight: 15,000 kg ONE SERVO MOTOR AND PUMP PER CYLINDER Standard equipment: - 4 axes (Y1, Y2, X, and R) - CNC control unit SKY 22 - Full HD graphic display 21.5” with 2D and 3D representation of the programed workpiece - Intuitive touchscreen operation (easy drawing of the bending contour with finger) - User-friendly dialog programming, selectable in 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of flat length for sheet cutting - Automatic calculation of bending sequences - Graphic product and tool memory - Correction option - USB ports and Ethernet connection for import, backup, and program export - Windows operating system - Import support for IGES, STEP, and DXF files - Servo-driven backgauge on linear guides and recirculating ball screws - Backgauge finger blocks on double linear guides - CNC-controlled crowning - Top tool 1010/A/75°, segmented and offset - 4-V die block 60x60 2009 (V = 16, 22, 35, and 50 mm) - Laser safety device Fiessler AKAS mounted on the upper beam - Sheet support arms on linear guides - Equipment complies with CE regulations - Oil filling - Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - The hydraulics run only during upper beam movement - Low energy consumption - Low noise emissions - High speed Options: - Z1/Z2 axes - CNC control Delem DA-66 S - CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability - Quick-clamping lever for the upper tool

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €103,100 Leasing rate: €1,948.59 Bending length: 2550 mm Max. bending capacity – structural steel: 25 mm Max. sheet thickness without prebending at D=5x top roll: 25 mm Max. sheet thickness without prebending at D=1.5x top roll: 20 mm Max. sheet thickness with prebending at D=5x top roll: 20 mm Max. sheet thickness with prebending at D=1.5x top roll: 16 mm Top roll diameter: 350 mm Bottom roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 5500 mm Width: 2000 mm Height: 1900 mm Weight: 13,000 kg 4 rolls Fully hydraulic drive of top and bottom rolls Hydraulic adjustment of bottom and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Central lubrication Itjdpfx Aoynm Eush Usn Overload protection Movable control panel Equipment according to CE regulations OPTIONS: Infinitely adjustable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: The maximum sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Stanje novo Dobavni rok približno 12 tednov od naročila Država izvora Turčija Cena 33.000 € Leasing rata 630,3 € Dolžina upogibanja 2530 mm Maks. kapaciteta upogibanja - konstrukcijsko jeklo 6 mm Maks. debelina pločevine brez predupogiba - konstrukcijsko jeklo 6 mm Maks. debelina pločevine s predupogibom - konstrukcijsko jeklo 4 mm Premer zgornjega valja 190 mm Moč motorja 5,5 kW Dolžina 4250 mm Širina 1200 mm Višina 1150 mm Teža 3750 kg 3 valji Asimetrična razporeditev valjev - s predupogibom 2 gnana valja Motoriziran pomik stranskega in vpenjalnega valja Digitalni prikaz položaja stranskega in vpenjalnega valja Itedpfxoynm E Ie Ah Uen Zgornji valj izhodno nagibljiv naprej Možnost dela naprej/nazaj Kaljeni valji Premična upravljalna konzola Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI (Simbolična slika)

Stanje: novo, Condition: New Delivery time: approx. 4 months from order Country of origin: Italy Price: €38,200 Leasing rate: €729.62 Pressing force: 70 tons Stroke: 500 mm Ram: 700 x 350 mm Table: 700 x 500 mm Installation height: 500 mm Throat depth: 250 mm Rapid traverse: 24 mm/s Working speed: 5 mm/s Motor: 4 kW Length: 1500 mm Width: 1000 mm Height: 2500 mm Weight: 2100 kg 2-point round guide Table and ram with T-slots Two-hand operation Siemens PLC Itodoynm Hlepfx Ah Usn Pressure gauge Operating manual 4-point round guide Price on request Light barrier Price on request Siemens control for programming the stroke and pressing time Price on request Siemens touchscreen control, capacity for 50 programs, for programming: - Upstroke and downstroke ratio - Dwell time at bottom dead center - Decompression time - Working pressure setting - Piece counter - Prestop in up and down movement - Setting for manual and automatic operation - Management of alarms and faults Price on request Hour counter Price on request Piece counter Price on request Decompression valve Price on request Oil cooler with decompression valve Price on request Pressure switch Price on request

Stanje: novo, Condition: new Delivery time: approx. 4 months from order Country of origin: Italy Price: €190,000 Leasing rate: €3,591 Pressing force: 300 t Stroke: 500 mm Table: 5,000 x 3,050 mm Installation height: 700 mm Rapid traverse: 20 mm/s Working speed: 2 mm/s Length: 4,000 mm Width: 5,000 mm Height: 2,600 mm Weight: 18,000 kg Cylinder: fixed or horizontally movable Clear gap between uprights: 3,050 mm Horizontally movable cylinder: 2,200 mm Itedpeynnc Usfx Ah Uen Hydraulically movable frame: 3,600 mm (Features both) horizontally movable cylinder and hydraulically movable frame Operation via hand lever and control panel Equipped in accordance with CE regulations Operating manual in GERMAN and ENGLISH OPTIONS: - Work table welded to the base frame, with boreholes on the surface - Control desk on swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) - Wireless control desk (push buttons for press movement, solenoid valves, Siemens CPU) - Siemens controller with touchscreen - Lifting cylinders integrated into table (6, 8, or 10 pcs.) - Anti-rotation device for the ram - Two speeds for frame and cylinder movement - Oil cooler and decompression valve

Stanje: rabljeno, Plotter Alys 30, rabljen, v celoti prenovljen s strani podjetja Lectra (glava, motor, pasovi). Itsdpfsy Ddutsx Ah Ujn

Stanje: novo, Condition: New Delivery time: approx. 14 - 16 weeks from order Country of origin: Italy Price: €199,300 Leasing rate: €3,766.77 Press force: 250 t Nominal press force at 8 mm Table length: 1,400 mm Table width: 800 mm Through-hole in table: 250 mm Stroke: 23 - 220 mm Strokes per minute: 25 - 50 Ram: 950 x 620 mm Ram guides: 8 Ram adjustment: 120 mm Throat depth: 410 mm Clear column width: 820 mm Motor: 33 kW Length: 1,600 mm Width: 2,900 mm Height: 4,250 mm Weight: 25,000 kg Touch screen operation Semi-automatic stroke change Motorised ram adjustment with mechanical display and decimal resolution Motor with variable speed Hydraulic overload protection Automatic cam control at top dead centre Double clamping plate Itjdpfxoyq Spde Ah Uen Oil circulation lubrication Dynamic braking Keyence light curtain Automation and press parameter control with PLC and alarm visualization on operator touch screen. Monitored standard parameters: - Regulation and visualization of press speed - Adjustable piece counter and total stroke counter - Motorised ram adjustment - Automatic and manual stroke adjustment - Tool monitoring - Visualization of alarms - Hydraulic safety PRICE FCA ITALY

Stanje: novo, Condition: new Delivery time: approx. 8 weeks from order Country of origin: Turkey Price: €111,800 Leasing rate: €2,113.02 Press force: 125 t Nominal press force at 5.5 mm Table length: 1,100 mm Table width: 630 mm Die opening in table: 180 mm Stroke: 15 - 150 mm Strokes per minute: 42 - 65 Ram size: 700 x 400 mm Ram guides: 8 Ram adjustment: 90 mm Itsdsyq Svqspfx Ah Ujn Throat depth: 320 mm Clear column spacing: 610 mm Motor: 15 kW Length: 1,400 mm Width: 2,200 mm Height: 3,120 mm Weight: 12,500 kg Touch screen operation Semi-automatic stroke changeover Motorized ram adjustment with mechanical display and decimal resolution Variable speed motor Hydraulic overload protection Automatic cam switch control at top dead center Double T-slot table Oil circulation lubrication Dynamic braking Keyence light curtain Automation and monitoring of press parameters with PLC; alarm visualization on operator touch screen. Standard monitored parameters: - Control and visualization of press speed - Adjustable piece counter and total stroke counter - Motorized ram adjustment - Stroke setting automatic or manual - Tool monitoring - Alarm visualization - Hydraulic safety

Stanje: novo, Stanje: novo Dobavni rok: cca. 12 tednov od naročila Država izvora: Turčija Cena: 7.700 € Leasing obrok: 148,61 € Stiskalna sila: 80 t Bata: fiksni ali pomični, vodoravno pomičen Hod: 250 mm Prosta širina stojala: 1040 mm Razdalja med mizo in nosilcem orodja: 865 mm Premer bata: 200 x 120 mm Delovna hitrost: 5 mm/s Hitrost povratka: 10 mm/s Dolžina: 1710 mm Širina: 700 mm Višina: 2100 mm Teža: 835 kg S horizontalno pomičnim batom s pritrdilno ročico Jeklena varjena konstrukcija Poljubna stop pozicija Kazalnik tlaka Varnostni ventil proti preobremenitvi 2 V prizmi Višinsko nastavljiva miza Dvig/spust mize Itsdpfxsypbqzs Ah Uon Upravljanje z ročico Oprema po CE predpisih Navodila za uporabo v NEMŠČINI in ANGLEŠČINI