Kk-Industries Cy4R-Hhs 460-30/40 nakup rabljenega (64.952)

Stanje: dober (rabljeno), Included in the scope of delivery: 01x Welded grating, used Material finish: hot-dip galvanized Total depth: approx. 2,460 mm (bearing bar direction) Total width: approx. 1,130 mm (cross bar direction) Bearing bar: TS30/2.00 Frame height: approx. 30 mm Mesh size: approx. 35 x 40 mm Weight per unit: approx. 49.61 kg Internal designation: GR-126 Dedpfxswl U S Ss Apwjwc Note: - Two L-angles are welded on each side for locking - The grating may show signs of damage, scratches, or dents. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for collection only. Any transport or shipment beyond this must be arranged separately and is subject to additional costs, which can be requested from us depending on the delivery location and scope of delivery.

Stanje: novo, Bending length: 3100 mm Sheet thickness: 6 mm Top roll diameter: 200 mm Technical specifications: - Rear roll motorized drive - Cone bending device - Hardened and polished rolls - Complete frame made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rolls driven by brake electric motors and planetary gearboxes - Portable control panel Dwjdpfx Aped Ab Nfewsc - Compliant with CE standards Options: - Bottom roll driven by electric motor: EUR 2,200 - Digital display for rear roll position: EUR 1,010 - Extended rolls: EUR 966 - Profile rolls: EUR 1,190 We have numerous references!

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 16.0 mm Frame gap: 3,100 mm Total power requirement: 18.5 kW Approx. weight: 11,700 kg Dimensions (LxWxH): 4,200 x 2,050 x 2,100 mm Technical Data: Sheet thickness: 16 mm Cutting length: 3,200 mm Cutting angle: 2° Backgauge: motorized, 1,000 mm Motor power: 18.5 kW Length: 4,200 mm Width: 2,150 mm Height: 2,200 mm Weight: 12,900 kg Equipment: Swing beam shear design NC preselection control ELGO P40 Touch with backgauge and blade gap adjustment via controller (front access) Motorized backgauge up to 1,000 mm Clear control panel mounted on swing arm Hydraulic hold-downs mounted close to the cutting edge Foot switch Blade gap adjustment Cutting line illumination Wide support table with ball inserts Dwsdped Ab Hlofx Apwoc Foldable finger guard, 1,000 mm 1 side stop with T-slot 2 sheet support arms with T-slot Easy blade changing and regrinding Adjustable cutting length for economical processing Lower blade, 4-fold usable Upper blade, 2-fold usable Qualified customer service Operating manual in ENGLISH Machine and equipment in compliance with CE regulations

Stanje: novo, Punching force: 55 t Approx. weight: 1,520 kg Height: 1,880 mm Motor: 5.5 kW Width: 1,500 mm Blade length: 317 mm Throat depth: 255 mm Stroke: 60 mm - Equipped with one cylinder - 5 workstations: Punching, notching station, as well as flat, bar, and angle steel shear stations. Equipped with: - Hydraulic and electrical components from renowned manufacturers - Support table at the punching station with scales and stops - Support table at the notching and flat steel stations with stops - Electric length stop 1,000 mm for automatic cut triggering - Selector switch for setup and operation modes - Technical documentation - Lighting - 2 foot pedals - CE-compliant FEATURE DESCRIPTION / VALUE Punching force: 55 t Throat depth: 255 mm Stroke: 60 mm Strokes per min. (with 20 mm stroke): 25 Max. sheet thickness: Ø 20 x 20 mm Working height: 900 mm Shearing capacity: 300 x 15 mm, 200 x 20 mm Angle steel 45° (1 leg): 70 x 70 x 10 mm Angle steel 90°: 120 x 120 x 12 mm Blade length: 317 mm Round: 40 mm Square: 40 mm Material thickness: 10 mm Width: 1,500 mm Depth: 950 mm Motor power: 5.5 kW Djdpfxjttc Upe Apwowc Mains voltage: 400 V, 50 Hz Height: 1,880 mm Weight: 1,520 kg

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 13.0 mm Total installed power: 18.5 kW Approx. weight: 11,700 kg Dimensions (LxWxH): 4,000 x 1,700 x 1,800 mm Technical data: - Sheet thickness: 13 mm - Cutting length: 3,200 mm - Cutting angle: 2.0° - Backgauge: motorized, 1,000 mm - Motor power: 18.5 kW - Length: 4,200 mm - Width: 2,050 mm Dsdpfod Ab Hmsx Apwjwc - Height: 2,100 mm - Weight: 11,700 kg Features: - Swing cut design - NC preselection control ELGO P 40 T Touch - With backgauge and adjustable blade gap from the front using the EURO P 40 Touch control - Motorized backgauge up to 1,000 mm - Clearly arranged control panel mounted on a swivel arm - Hydraulic hold-downs positioned close to the cutting line - Foot switch - Blade gap adjustment - Cutting line illumination - Wide support table with ball transfers - Folding finger guard, 1,000 mm - 1 side stop with T-slot - 2 sheet support arms with T-slot - Easy replacement and regrinding of the blades - Adjustable cutting length for efficient processing - Lower blade can be turned 4 times - Upper blade can be turned 2 times - Qualified customer service - Operating manual in ENGLISH - Machine and equipment in accordance with CE regulations

Stanje: generalkompletno obnovljen (rabljeno), kapaciteta baterije: 620 Ah, napetost baterije: 80 V, skupna višina: 784 mm, skupna dolžina: 1.025 mm, skupna širina: 708 mm, Tested forklift battery for your forklift – 80V 4PZS 620AH – DIN A + 1-year warranty + Incl. aquamatic (automatic watering system) + Incl. end connectors & REMA 320 plug (other plugs can be installed upon request) + Capacity: min. 90-100% (C5 capacity report will be included upon delivery) + Year of delivery: 2024 Dimensions: Length: 1,500 mm Width: 708 mm Height: 784 mm Weight: approx. 1,600 kg Suitable for the following models and others: Linde E 20 - 325-00 Linde E 20 / 600 - 387-00 Linde E 20 / 600 H - 1252-01 Linde E 20 / 600 H - 387-00 Linde E 20 / 600 RH - 387-00 Linde E 20 H - 387-00 Linde E 20 HOCH - 325-00 Linde E 20 HOCH - 336-00 Linde E 20 P - 325-00 Linde E 20 Z - 325-00 Linde E 25 - 325-00 Linde E 25 - 336-00 Linde E 25 - 387-00 Linde E 25 / 600 - 387-00 Linde E 25 / 600 H - 1252-01 Linde E 25 / 600 H - 387-00 Linde E 25 / 600 RH - 387-00 Linde E 25 CH - 387-00 Linde E 25 H - 387-00 Linde E 30 CH - 387-00 Linde E 30 H - 387-00 Linde E 30 P - 325-00 Linde E 30 SH - 1276-00 Linde E 35 - 337-00 Linde E 35 - 337- Linde E 35 P - 337-00 Linde E 40 P - 337-00 Linde K - 5231-00 Linde K - 5231-00 - side load Linde K 12 - Linde K 15 - Linde P 200 - 370-00 Linde P 250 - 127-00 - vertical change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - side load Linde P 250 SWB - 5007-10 - vertical change Still MX-X Still R. 07-25 Still R 60-20 Still R 60-22 Still R 60-25 Still RX 60-25 Still RX 60-30 Jungheinrich EFG 25 Jungheinrich EFG 425 Jungheinrich EFG 425 K Jungheinrich EFG V 25 Jungheinrich EKX 515 Jungheinrich EKX 515 K Jungheinrich EKX 525 K Jungheinrich ETX Toyota 7FBMF20 Toyota 7FBMF25 Toyota 8FBMKT25 Toyota 8FBMKT30 Dwedpjy Rnrijfx Apwoc Toyota FBM25 Toyota FBMF20 Toyota FBMF25 Crown TSP 6000 - B Crown TSP 6000 - C Crown TSP 7000 Atlet EH 25 Balkancar EV715 Balkancar EV720 Clark GEX25 Heli CPD 30 Heli CPD 35 Hubtex MQ 40 Hyster E5XN Hyster J2.0 Hyundai 25BHA7 Mitsubishi FB25CN Nissan 1Q2L25Q Nissan QX25 Common battery sizes available – please inquire. Transport possible.

Stanje: novo, Dolžina pločevine: 2560 Debelina pločevine: 2,5 Standardna oprema: NC-krmiljenje Dwedpsgiclajfx Apwoc Programirno motorizirano zadnje vodilo s hodom 750 mm Osvetlitev sence rezalne črte 1 kos vpenjalne roke z merilno lestvico 2 kosa podpornih roke za pločevino 1 kos dodatne podporne roke (za modele 1106-1306-1505) Zaščita za prste Kroglična miza (Ball Transfer Table) Enostavna nastavitev reže od spredaj Kroglični vreteno Števec rezov Prenosno nožno stikalo z gumbom za zaustavitev v sili Svetlobna pregrada na zadnjih varovalih

Stanje: novo, x-axis travel: 4000 mm y-axis travel: 2000 mm z-axis travel: 250 mm Pump output for flushing: 37 kW Control: Siemens PLC touch screen, direct import of usable DXF files Max. output pressure: 5500 bar Abrasive delivery system for waterjet cutting machines – fill weight 350 kg OMAX vacuum sensor for monitoring abrasive feed to the nozzle Sensor for monitoring pump pressure In waterjet cutting, water is pressurized up to 5500 bar. Depending on the requirements and workpiece, it is then forced through a nozzle with a diameter between 0.01 and 0.08 mm. Since the waterjet process works without heat input, material deformation is avoided. By adding abrasive, waterjet cutting achieves maximum precision with tolerances of +/- 0.01 mm. Our flexible production enables both vertical and bevel cuts. We are happy to receive your custom CAD files. Waterjet technology provides significant advantages for industry, trade, and custom prototyping. It is also environmentally friendly as waterjet cutting operates dust-free and steam-free, while also conserving material. Waterjet cutting: example gallery What already sounds impressive in theory is even more striking in the finished product. We have compiled a selection of images to demonstrate our capabilities in waterjet cutting. Click through our sample gallery to see what is possible with this modern processing technology. Waterjet will find the ideal solution for your application! Advantages - No deformation in the cutting area - Cutting without thermal input - Material saving - High precision: +/- 0.1 mm - Cutting area: x = 4010 mm; y = 2010 mm; z = 250 mm - Flexible manufacturing - Vertical and bevel cuts - Acceptance of your CAD data formats: DXF, DWG, IGES, STP, STEP, PRT, JPT, JAM - Environmentally friendly, dust- and steam-free We cut everything! All materials shaped, including: - Aluminium - Steel - Brass - Copper & bronze - Other precious metals Dsdpjd Ab Uujfx Apwjwc - Glass - Granite & marble - Tiles - composites - Foam material cuts - Rubber - Plastics - Plexiglas Optional: Oil cooler                                                                € 10,725.00 Water filtration system                                              € 1,430.00 Sludge extraction system                                            € 10,725.00 Professional water treatment system                        € 10,725.00 An oil cooler must be present during commissioning!!! Operation for longer than 1 hour is only possible with an oil cooler.

Stanje: novo, Dolžina pločevine: 3100 Debelina pločevine: 13 Upogibanje: 10 Skupna potrebna moč: 15 Teža približno: 10 Dimenzije (DxŠxV): 4,88x1,16x1,18 Slika podobna Premer valja (zgoraj/spodaj): Ø270 mm Dolžina upogibanja: 3.100 mm Največja debelina pločevine za običajno upogibanje: 13 mm Največja debelina pločevine za pred-upogibanje: 10 mm Pred-upogibanje / Upogibanje: 8 mm / 10 mm (glede na polmer Ød × 1,5) CE-standard Spremenljiva hitrost Krmilna enota – 7-palčni zaslon na dotik Stožčasto upogibanje Induktivno kaljeni valji Pozicioniranje stranskih valjev preko elektronsko sinhroniziranega PLC Dwodod Ab H Eepfx Apwsc Spodnji valj trdno mehansko sinhroniziran Varnostni mehanizem za varjenje na stroju Ograja za sprostitev napetosti iz jeklene konstrukcije Ležajni valji Hidravlično odpiranje zgornjega valja Zgornji in spodnji valji poganjani s hidravličnim motorjem in planetnim menjalnikom Električna in hidravlična zaščita pred preobremenitvijo Hidravlično nastavljiv pritisk spodnjih valjev

Stanje: novo, Shaft diameter: 30 mm Upper roll diameter: 148 mm Lower roll diameter: 118 mm Dodpfxsd Eqqzs Apwewc Working speed: 2-4 m/min Motor power: 0.7 - 0.85 kW Length: 600 mm Width: 800 mm Weight approx.: 220 kg Height: 1450 mm Technical specifications: - Steel frame - Two lower rolls are powered - Direct gear drive system - Upper roll rotates freely (idle) - Hardened rolls - Roll shafts are hardened and ground - Dual-speed motor - Standard rolls - Adjustable guide rolls - Horizontal and vertical working positions Options: - Digital readout €600 - Angular side guide rolls €900 - Dual speed STANDARD - Brake motor €150 PK 30 File Type Size Min. Dia Notes 150x10 20x6 1800 300 Standard Rolls 280x15 30x6 700 400 Standard Rolls 330x30 10x10 900 200 Standard Rolls 4Ø 30 Ø 10 900 200 Optional Rolls 5Ø 60x1.5 Ø 25x1.5 1000 600 Optional Rolls 6 1/2”x2.9 1/4”x1.8 600 300 Optional Rolls 750x30x3 40x20x2 1200 800 Optional Rolls 840x3 30x2 1200 800 Optional Rolls 940x40x5 30x30x4 600 300 Optional Rolls 1035x35x5 30x30x4 600 400 Optional Rolls 1150x6 20x3 600 400 Standard Rolls 1250x6 20x3 600 400 Standard Rolls 1350x6 20x3 600 400 Standard Rolls * A special washer (spacer) may be required / Only with special beam bending attachment • Capacities given for 260 N/mm² plate yield strength

Stanje: novo, Shaft diameter: 30 mm Upper roller diameter: 148 mm Lower roller diameter: 118 mm Working speed: 2-4 m/min Motor power: 0.7 - 0.85 kW Length: 600 mm Width: 800 mm Approx. weight: 220 kg Height: 1450 mm Technical specifications: - Steel frame - Two lower rollers are driven - Direct drive via gears - Upper roller runs idle (free-rotating) - Hardened rollers - Roller shafts are hardened and ground - Dual-speed motor - Standard rollers - Adjustable guide rollers - Horizontal and vertical working position Options: - Digital display EUR 700 - Angular side guide rollers EUR 1,100 - Dual speed STANDARD - Brake motor EUR 150 PK 30 File Type Size Min. Dia Notes 150x10 20x6 1800 300 Standard Rolls 280x15 30x6 700 400 Standard Rolls 330x30 10x10 900 200 Standard Rolls 4Ø 30 Ø 10 900 200 Optional Rolls Dwodpfx Asd Eqq Ajpwsc 5Ø 60x1.5 Ø 25x1.5 1000 600 Optional Rolls 1 1/2”x2.9 1/4”x1.8 600 300 Optional Rolls 750x30x3 40x20x2 1200 800 Optional Rolls 840x3 30x2 1200 800 Optional Rolls 940x40x5 30x30x4 600 300 Optional Rolls 1035x35x5 30x30x4 600 400 Optional Rolls 1150x6 20x3 600 400 Standard Rolls 1250x6 20x3 600 400 Standard Rolls 1350x6 20x3 600 400 Standard Rolls * Special washer (spacer) may be required / Only with special beam bending attachment • Capacities specified for 260 N/mm² plate yield strength

Stanje: novo, Pressure: 20 tons Cylinder: stationary Stroke: 350 mm Frame width: 520 mm Working speed: 4 mm/sec Return speed: 30 mm/sec Length: 1200 mm Width: 500 mm Dwedpswwnhksfx Apwoc Height: 1800 mm Approximate weight: 210 kg Height-adjustable work table – manually adjustable for maximum operational flexibility Safe two-hand operation – convenient control via hand lever and push button Adjustable maximum pressure – can be customized for various applications Integrated pressure gauge – enables precise pressure monitoring during operation CE-compliant design – manufactured according to current safety and quality standards Operating manual – detailed and easy to understand, available in German and English Two working speeds – for especially precise and efficient work

Stanje: rabljeno, Further technical data available on request. The scrubber-dryer with a 55 cm working width and semi-automatic drive is the ideal machine for cleaning small to medium-sized areas, even those with stubborn dirt. It is designed for high productivity, low operating costs, and extremely simple operation. - Battery-powered scrubber-dryer with semi-automatic drive, disc brush, and dirty water suction - The floor is left dry and safe with just one pass - Designed for high productivity, low operating costs, and very simple use - Automatic squeegee release on accidental impacts protects against damage - Yellow-colored maintenance points for quick and easy servicing - Adjustable dosing of cleaning solution - Automatic water and brush stop when the machine is not in operation - Mechanical operation of brush and squeegee via levers Cleaning area: 1,000–1,600 m² Theoretical productivity: 1,450 m²/h Working width (brushes): 510 mm Working width (suction): 680 mm Packaging unit: 1 Dimensions & weights: Length: 1,165 mm Width/depth: 541 mm Height: 995 mm Weight: 61.5 kg Brushes Brush diameter: 510 mm Brush pressure: 27.5 kg Brush speed: 160 rpm Electrical connection Total power: 870 W Power supply: 24 V battery Battery runtime: 240 min Battery charging time: 12 h Operating voltage: 24 V Tanks Dedpfx Apel Iir Sswowc Fresh water: 40 l Dirty water: 42 l

Stanje: rabljeno, Hydraulic power unit, hydraulic pump, universal unit, hydraulic station Dwsdpfop A A R Ssx Apwsc -Manufacturer: HAWE, hydraulic power unit with double pump -Hydraulic pumps: Type IPC5-40 / IPC6-30 -Pressure: up to 250 bar -Flow rate: /min -Motor: Loher KNGA250SB-04Z 75 kW -Individual components: see photos -Dimensions: 2300/800/H9500 mm -Weight: 1000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Prodam profesionalni lepilni agregat Robatech RoBa 30, švicarske izdelave (Robatech AG CH-5630 Muri). Naprava je popolnoma delujoča, kompletna in pripravljena za uporabo. Idealna za pakirne linije, zgibne-lepilne stroje, kartonažerje ter stroje, ki zahtevajo natančno doziranje talilnega lepila. Tehnični podatki: Dwsdpfsum Hufsx Apwjc * Model: RoBa 30 * Leto izdelave: 1984 * Zmogljivost: 900 g/min * Maks. hidravlični tlak: 40 bar * Maks. zračni tlak: 5 bar * Maks. delovna temperatura: 200°C * Napajanje: 240 V * Poraba toka: 10 A * Prenos črpalke: 1:8 * Identifikacijska ploščica je čitljiva, manometer deluje Stanje: * naprava v dobrem tehničnem stanju * kompletna, brez manjkajočih delov * švicarska kakovost – zelo trdna konstrukcija

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Polnilnik Stanje: Nova naprava Tehnično stanje: Novo Dwodpfjywpmnjx Apwec Opis: Visokofrekvenčni polnilnik na voljo v naslednjih zmogljivostih: 24V 50A, 24V 40A, 24V 30A, 24V 20A, 24V 15A, 24V 10A. Za dodatna vprašanja nas prosim pokličite. Poleg tega modela imamo na zalogi še približno 150 drugih viličarjev. Obiščite našo spletno stran fleischmann-foerdertechnik. Z veseljem vam ponudimo tudi leasing & financiranje ter ugodne pogoje dostave. Možen je tudi odkup Linde naprav – tudi če pri nas ne kupite naprave. Navedene delovne ure so bile odčitane na dan vnosa oglasa. Predhodna prodaja, spremembe in napake pridržane.

Stanje: novo, Pressure: 100Motor: 11Installation Height: 500Max. Stroke Length: 400Ram Adjustment: 790 x 600Table Height: Floor to Top of Table - 850Dimensions (LxWxH): 1,300 x 2,000 x 2,750 mmWeight approx.: 5,500Oil Fill: 200Type: Hydraulic C-Frame PressCapacity: 100 tons at 230 bar Control / Key Switch Modes: Setup Mode – Manual, without light curtain Automatic Mode – Full speed with light curtain Hydraulic System: Main Cylinder: Ø 230 mm Auxiliary Cylinders: 2 units, Ø 50 x 30 mm Auxiliary Guides: 2 units, Ø 50 mm Motor: 11 kW / 15 HP Pump: 16 cc – 23 l/min, helical gear pump Speeds: Advance: 110 mm/sec Return: 200 mm/sec Pressure Phase: 9 mm/sec Machine Dimensions: Installation height: 500 mm Stroke length: 400 mm Ram plate: 790 x 600 mm (with T-slots) Dodjwrkctepfx Apwewc Table plate: 790 x 600 mm (with T-slots) Table height: 850 mm (from floor to top of table) Hydraulic Accessories: Hydraulic control block & components by REXROTH Pressure setting via PLC (20 – 100 tons) Speed adjustable via PLC Air cooler Pre-fill valve Pressure holding valve Control Accessories: Siemens S7-1200 control system Main control cabinet Safety PLC by SICK Safety light curtains by SICK (700 mm) Linear scale for stroke adjustment 10" BEIJER touchscreen (German & English) Movable two-hand control Ethernet interface for remote maintenance Fault indicator with light and audible alarm Dual workspace lighting Side safety doors (can be swung out) Hydraulic proportional valves Dual-channel safety control Operating manual & parts list (German) Complies with current machinery directive EN 693 Oil quantity: 220 liters (tank volume: 250 liters) Total weight: approx. 5,500 kg Dimensions: 1,300 x 2,000 x 2,750 mm Paint finish: RAL 7035 light grey & RAL 7016 anthracite grey

Stanje: novo, Pressure: 220 Bending Length: 4050 mm Frame Gap: 3550 mm Installation Height: 600 mm Stroke Length (max.): 350 mm Throat Depth: 450 mm Dimensions (LxWxH): 4740 x 2290 x 3050 mm Approx. Weight: 13,350 kg 4 Axes (Y1, Y2, X, R): Yes, all axes via Esa S630 (2D graphical control) CNC crowning via control: Yes, via Esa S630 (2D graphical control) Motor Power: 22 kW Technical Specifications Model: XL 40220 Unit Bending length: 4050 mm Bending force: 220 t Approach speed: 140 mm/s Bending speed: 10 mm/s Return speed: 130 mm/s Stroke: 350 mm Installation/Daylight Height (E): 600 mm Throat Depth (D): 450 mm Frame gap (B): 3550 mm Machine Length (L): 4740 mm Machine Width (W): 2290 mm Width without front gauge (Y): 1730 mm Max. Height: 3050 mm Main Motor: 22 kW Hydraulic Tank Volume: 300 l Machine Weight: 13,200 kg Model KKI EUROPA XL The robust EUROPA XL press brake stands out for its high precision, accuracy, and versatile application possibilities. The Europa XL features a very large installation height and, as a result, a long stroke (cylinder travel). The throat depth is also exceptionally large to minimize restrictions. We focus on quality, which is also reflected in the control system. As a standard, we provide the high-quality Esa S640 (2D graphical control). Furthermore, the KKI Europa XL press brake is equipped with CNC axes Y1, Y2, X, and R via the control system. CNC crowning via Esa S640 (2D graphical control) is, of course, also included. With the top and bottom tooling, we make no compromises: the KKI EUROPA XL CNC press brake comes equipped with premium tools from EUROSTAMP Italy. Naturally, every machine is only as good as its service. For this reason, we place great importance on highly qualified personnel with many years of experience in CNC sheet metal processing. CNC Axes Y1, Y2, X, and R Esa S640 (2D graphical control) Backgauge with twin linear guides and ball screw Powered crowning device with CNC control Dwjdpfx Aped Ehicowec Heavy-duty height adjustment via handwheel; heavy-duty linear guides from 175 t onwards Laser protection system on the upper beam CE-certified safety equipment Various options available Other Control Systems Available: ESA 640 2D 15'' touchscreen control — €4,520 incl. ESA 675 W 3D 21'' touchscreen control (Windows base) — €6,485 DELEM 66 T 2D 17'' touchscreen control (Windows base) — €10,165 DELEM 69 T 3D 17'' touchscreen control (Windows base) — €16,350 KK-Industries GmbH There’s something for everyone!

Stanje: novo, Column spacing: 2000 x 1000 Return speed: 150 mm/s Approximate weight: 35,000 kg Stroke: 800 mm Total power requirement: 30 kW Installation height: 1000 mm Rapid traverse: 120 mm/s Pressure: 500 bar Working table: 2500 x 1500 mm Working speed: 12 mm/s Dimensions (LxWxH): 2500 x 2700 x 5400 mm We also build custom presses for your specific application. DETAILS: 4-Column Press, 500 tons Capacity: 500 tons (at 250 bar – 510 tons) Control: Automatic via two-hand operation with key switch selection 1. Manual via operating panel for setup mode 2. Automatic with single cycle via two-hand operation, without drawing cushion Main cylinder: Ø500 mm Auxiliary cylinders: 2 pcs, Ø120 x 80 mm (move alongside main cylinders) Motor: 37 kW – 50 HP Pump: 100 cc = 150 l/min REXROTH axial piston pump Cylinder speed: Advance 150 mm/s – Return 170 mm/s – Pressure phase 15-8 mm/s Working area: 2500 x 1300 mm (Table & ram plate with T-slots) (T-slot dimensions as per customer drawing) Distance between columns: 2000 x 800 mm Installation height: 1000 mm (max. distance between table & ram plate) Stroke length: 800 mm (length adjustable via linear scale) Columns: Ø180 mm Hydraulic accessories: Dwedpfsd Aca Ajx Apwsc Hydraulic tank with control block & valves (complete REXROTH) Oil tank capacity: 1500 l; Oil volume: 1200 l Advance valves: 2 pcs Hydraulic & mechanical ram securing system Pressure regulator via PLC (min. pressure 60 tons) Air cooler Hydraulic accessories mounted on top of the press Auxiliary motors Auxiliary pump Filter: Rexroth Additional valve for spring-loaded opening Speed adjustment via display Hydraulic accessories mounted on top of the press Safety railing around hydraulic tank Side access ladder Control accessories: Controller: SIEMENS S7 1214 Safety PLC: SICK Swiveling control panel Ethernet connection for remote maintenance Two-hand operation (mobile, sufficient cable length for front & rear operation) Main control cabinet 12" Beijer PLC display Light sensors at front & rear – SICK 1000 + 150 mm Linear scale for stroke length adjustment (Novatechnik) Soft starter for main motor 8 free inputs & outputs Working area lighting On side of working area: windowed door secured with limit switch (400 x 600 mm) Table height: 1000 mm (floor to top edge of table plate) Total weight: approx. 35,000 kg Overall dimensions (LxWxH): approx. 2500 (including hydraulics) x 2700 x 5400 mm (including railing) Foundation: mandatory The price is valid until 30.12.2022! Training and commissioning are included in the price.

Stanje: novo, Sheet length: 3280 mm Sheet thickness: 10.0 mm Total power requirement: 11 kW Weight approx.: 8,650 kg Dimensions (LxWxH): 3800 x 2050 x 2150 mm Our premium brand KKI CNC GUILLOTINE SHEAR swing-beam version Model 3210 has everything you need for perfect cutting results. KKI CNC swing-beam guided guillotine shear Thanks to robust and durable mechanics and hydraulics, a precise CNC-controlled backgauge with a ball screw, and user-friendly CNC control, KKI guillotine shears are highly efficient production machines. Shears for sheet thicknesses from 6 mm up to 20 mm and cutting lengths from 3 to 6 meters belong to our standard portfolio. Of course, greater sheet thicknesses and cutting lengths are available on request. Their long service life is ensured by an especially sturdy, fully welded frame construction. The entire machine body, cutting beam, and backgauge are resistant to torsion and deformation, enabling top cutting quality. By entering the sheet thickness and material type, the CNC control automatically calculates the required cutting angle and blade gap. Our premium brand KKI CNC GUILLOTINE SHEAR swing-beam version Model 3210 has everything needed for perfect cutting. Technological advantages: - Fast and precise cuts - Stable, durable frame construction - Automatic blade gap and angle adjustment - Easy operation - Low maintenance costs - High level of safety - Use of components from renowned manufacturers Djdpfx Apsd Nkt Uewswc - Low unit costs Technical specifications: - Sheet thickness: 10 mm - Cutting length: 3,280 mm - Cutting angle: 0.3 - 1.8° - Backgauge with CNC control - Motor power: 11 kW - Length: 3,800 mm - Width: 2,050 / 2,960 mm - Height: 2,150 mm - Weight: 8,650 kg • Swing-beam version • CNC control - Backgauge - Cutting angle - Blade gap - Cutting length • Ball screws for backgauge • Ball transfer table • Side gauge • 2 support arms • 1,000 mm flip-up finger guard Includes simple version of pneumatic sheet support We have many references!

Stanje: skoraj kot novo (rabljeno), Expected stock: approx. 840 units. We are offering here a second-choice lattice girder from the manufacturer SSI Schäfer for purchase. Technical data for the lattice girder: Racking system: SSI Schäfer Type: PR 600 Scope of delivery: 01x lattice girder, second-choice Dwsdpfxeh Eg Ago Apwec Material finish: Sendzimir galvanized Total length: approx. 1,270.0 mm Center-to-center hole: approx. 1,230.0 mm Profile dimensions: C 40 x 30 x 8 mm Hole diameter: approx. 11 mm Material thickness: approx. 1.25 mm Weight per unit: approx. 1.35 kg General information about the item: This item is only offered for collection. If transport or shipping of this item is required, it will incur additional costs, which can be requested individually from us depending on the delivery location or scope of delivery.

Stanje: novo, Pressure: 400Bending length: 4050mmFrame gap: 3550mmInstallation height: 650mmStroke (max.): 400mmThroat depth: 450mmDimensions (LxWxH): 5000x2770x3560mmWeight approx.: 23,950kg4 Axes (Y1, Y2, X, R): Yes, all axes controlled via Esa S640 (2D graphic control)CNC crowning via control: Yes, with Esa S640 (2D graphic control)Motor power: 45kWTechnical specificationsXL 40320UnitBending length4050mmBending force320tLowering speed125mm/sBending speed10mm/sReturn speed120mm/sStroke400mmInstallation/clear opening (E)650mmThroat depth (D)450mmFrame gap (B)3550mmMachine length (L)4780mmMachine width (W)2290mmWidth without front stop (Y)1760mmMaximum height3100mmMain motor30kWTank capacity400lMachine weight17500kg The powerful EUROPA XL press brake stands out for its high precision, accuracy, and versatile applications. The Europa XL features an extra-large installation height with a correspondingly large stroke (cylinder travel). The throat depth is also above average, providing ample working flexibility. We focus on quality, which is reflected in the control system. As standard, we offer the high-grade Esa S640 2D graphic control system. Furthermore, the KKI Europa XL press brake comes equipped with CNC Y1, Y2, X, and R axes managed via the controller. Naturally, the CNC crowning control via Esa S640 (2D graphic control) is included as well. We make no compromises on the upper tooling and die, outfitting the CNC press brake KKI EUROPA XL with premium tools from EUROSTAMP Italy. Of course, a machine is only as good as the service it comes with. That’s why we emphasize highly qualified staff with extensive experience in CNC sheet metal processing. CNC axes Y1, Y2, X, and R Esa S640 (2D graphic control) Back gauge with double linear guides and recirculating ball screw CNC motorized crowning device Heavy-duty version height adjustment with handwheel; from 175t, heavy-duty linear guide Laser protection system on the upper beam CE safety equipment Various options available Additional controllers: ESA 640 2D 15'' touchscreen control                                                               ¤   4,520 -- incl. Dwsdped Ehiasfx Apwsc ESA 675 W 3D 21'' touchscreen control (Windows based)               ¤   6,485 -- DELEM 66 T 2D 17'' touchscreen control (Windows based)               ¤ 10,165 -- DELEM 69 T 3D 17'' touchscreen control (Windows based)               ¤ 16,350 -- KK-Industries GmbH There’s something for everyone!

Stanje: novo, Pressure: 100 Motor: 15 Mounting height: 500 Max. stroke length: 400 Table size: 800 x 600 Ram area: 800 x 600 Table height: 850 Dimensions (LxWxH): 1,300 x 2,000 x 2,750 Approx. weight: 5,500 Oil capacity: 200 Control / Key switch: 1. Set-up mode Manual without light sensor (max. 10mm/sec speed) 2. Automatic (with full speed) with light sensor Main cylinder: Ø 230mm Auxiliary cylinders: 2 pcs Ø 50 x 30mm Auxiliary guides: 2 pcs Ø 50mm Motor: 11 kW – 15 hp (IE-3) Pump: 23 liters / ASC Speed: Advance 110mm/sec – Return 200mm/sec – Pressure: 9mm/sec Mounting height: 500mm Stroke length: 400mm Table plate: 800 x 600 (with T-slots) (custom designs possible) Ram plate: 800 x 600 (with T-slots) Table height: 850mm (floor to top edge of table plate) ----- Dwedpjm Nntyjfx Apwjc Hydraulic Accessories: Hydraulic control block & accessories: REXROTH Pressure setting via PLC (20 – 100 tons) Speed adjustable via PLC Air cooler Pre-fill valve Control Accessories: Siemens S7-1200 Main control cabinet Swiveling operator panel Safety PLC – SICK Light sensors SICK 700 + 150mm Linear scale for setting stroke length 9” PLC display – Siemens (German & English) Mobile two-hand operation Ethernet connection for remote maintenance Alarm indicator for faults (light & sound) 2x workstation lighting 8 free inputs & outputs on the PLC for external connections The press complies with Machinery Directive Hydraulic proportional valves Dual-channel cable safety Operating manual & parts list (German) With side safety door (doors slide to the rear)

Stanje: zelo dobro (rabljeno), We are offering a second-choice lattice beam from the manufacturer SSI Schäfer for purchase. Technical data for the lattice beam: Racking system: SSI Schäfer Type: PR 600 Scope of delivery includes: Djdoh Eg Akopfx Apwjwc 01x Lattice beam, second-choice Material finish: Sendzimir galvanized Overall length: approx. 1,249.2 mm Hole center-to-center: approx. 1,209.2 mm Profile dimensions: C 40 x 30 x 8 mm Hole diameter: approx. 11 mm Material thickness: approx. 1.25 mm General information about the item: This item is only available for collection. Any additional transportation or shipping of this item will incur extra costs, which can be quoted separately depending on the delivery location and scope.

Stanje: novo, Bending length: 2600 mm Sheet thickness: 25 mm Top roller diameter: 360 mm Technical specifications: - Hardened and polished rollers - Complete body made of ST-52 steel - Conical bending device - Digital display for side rollers - Portable control console - Rollers mounted with bearings - Upper roller cover, hydraulically openable and closable via control panel - All rollers driven by hydraulic motor and planetary gearbox - Lateral movements hydraulically powered Options: - Variable rotation speed EUR 4,682 - Material feed table on request - Oil cooler EUR 1,040 - Central support EUR 13,600 - Side supports EUR 9,200 Dwjdpfsd Ab S Dsx Apwjc We have numerous references!