Kk-Industries 4 Zvitki Hidravličnih Upogibnih nakup rabljenega (73.484)

Stanje: novo, Dolžina pločevine: 2560 Debelina pločevine: 2,5 Standardna oprema: NC-krmiljenje Programirno motorizirano zadnje vodilo s hodom 750 mm Osvetlitev sence rezalne črte 1 kos vpenjalne roke z merilno lestvico 2 kosa podpornih roke za pločevino Isdpfx Asgiclajl Nstf 1 kos dodatne podporne roke (za modele 1106-1306-1505) Zaščita za prste Kroglična miza (Ball Transfer Table) Enostavna nastavitev reže od spredaj Kroglični vreteno Števec rezov Prenosno nožno stikalo z gumbom za zaustavitev v sili Svetlobna pregrada na zadnjih varovalih

Stanje: novo, Shaft diameter: 480 mm Working speed: 3-6 m/min Motor power: 22 kW Length: 2500 mm Width: 2200 mm Height: 2300 mm Weight approx.: 9300 kg Technical data: - Welded frame made of steel construction - 3 driven rolls - Hardened and ground shafts made of high-strength special steel - Rolls are hardened and ground - Horizontal working position - Hardened standard rolls - Mobile control panel - Lateral angle guide rolls - Equipped with brake motor for precision bending - Digital readouts (2 units) Ijdpfeh Alh Rjx Al Notf Options: - STANDARD digital readout - NC unit 10 Screen EURO 11,500,--

Stanje: novo, Bending length: 2600 mm Sheet thickness: 5 mm Upper roller diameter: 170 mm Technical specifications: - Rear roller powered by motor - Cone bending device - Hardened and polished rollers - Entire frame made of St 52 steel - Asymmetric design for perfect bending results - Upper and lower rollers driven by brake motors and planetary gearbox - Portable control panel - In compliance with CE standards Options: - Lower roller driven by electric motor: EUR 1,650 - Digital display for rear roller position: EUR 1,010 - Extended rollers: EUR 966 - Profile rollers: EUR 1,190 We have numerous references! Itodpfxed Ab Nno Al Njf

Stanje: novo, Bending length: 1050 mm Sheet thickness: 5.5 mm Top roll diameter: 130 mm Technical specifications: - Back roll driven by electric motor - Cone bending device - Hardened and polished rolls - Entire body made of St 52 steel - Main motor with brake system - Top and bottom rolls driven by electric motor, gearbox, and gear system - Movable control panel - Cast iron body - Manual adjustment of rear and lower rolls - In compliance with CE standards Options: Iodped Ab Nysfx Al Notf - Top roll driven by electric motor EURO 1,166 - Digital display for back roll position EURO 1,010 - Hardened rolls EURO 799 - Special voltage EURO 480 - Material feed table - Bottom roll driven by electric motor We have numerous references!

Stanje: novo, Bending length: 3100 mm Sheet thickness: 25 mm Top roll diameter: 390 mm Technical data: - Hardened and polished rolls - Complete body made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel - Rolls mounted with bearings - Upper roll cover, hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements driven hydraulically Options: - Variable rotation speed EURO 4,682 - Material infeed table on request - Oil cooler EURO 1,040 - Central support EURO 13,600 Itedpfx Aed Ab Swsl Nef - Side supports EURO 10,540 We have numerous references!

Stanje: novo, Bending length: 3100 mm Sheet thickness: 20 mm Top roll diameter: 360 mm Technical data: - Hardened and polished rolls - Entire frame made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel Itedpfx Alod Ab S As Nef - Rolls are mounted on bearings - Top roll cover hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Side movements are hydraulically driven Options: - Variable rotation speed: EUR 4,682 - Material feed table: on request - Oil cooler: EUR 1,040 - Central support: EUR 13,600 - Side supports: EUR 9,400 We have numerous references!

Stanje: novo, Bending length: 2100 mm Sheet thickness: 20 mm Top roll diameter: 300 mm Technical specifications: - Hardened and polished rolls - Entire frame made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel - Rolls mounted with bearings - Hydraulic upper roll cover, openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements hydraulically powered Options: - Variable rotation speed: EUR 4,682 Itodpjd Ab Taefx Al Njf - Material feed table on request - Oil cooler: EUR 1,040 - Central support: EUR 13,600 - Side supports: EUR 8,400 We have numerous references!

Stanje: novo, Bending length: 1600 mm Sheet thickness: 8 mm Top roll diameter: 190 mm Technical Specifications: - Hardened and polished rolls - Entire frame made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel - Rolls mounted with bearings - Top roll cover, hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Side movements hydraulically operated Options: - Variable rotation speed: EUR 4,682 - Material feed table: on request - Oil cooler: EUR 1,040 - Central support: EUR 8,250 Isdpfxed Ab Tqo Al Nstf - Side supports: EUR 4,580 We have numerous references!

Stanje: novo, Bending length: 1050 mm Sheet thickness: 1.8 mm Top roller diameter: 70 mm Isdpfx Alsd Ab T Rs Nstf Technical specifications: - Cast iron frame - Manual or motorized (optional) bending - After bending, the top roller can be opened sideways for easy material removal - Cone bending device - Rear and bottom roller adjustment up and down manually via handwheel - Portable control panel - In compliance with CE standards Options: - Motorized rear roller - Digital display for rear roller position - Body cover EURO 274,-- - Hardened rollers EURO 392,-- - Variable rotation speed We have numerous references!

Stanje: novo, Shaft diameter: 50 mm Roller diameter: 155 mm Working speed: 4.5 m/min Motor power: 1.5 kW Length: 750 mm Width: 1000 mm Height: 1400 mm Weight approx.: 400 kg Technical data: - Steel frame - Two directly driven rollers - Rollers are hardened - Roller shafts made of special steel, hardened and ground - Roller shafts mounted in bearings - Standard rollers - Guide rollers - Horizontal and vertical working position Options: - Digital display EUR 700 - Lateral angle guide rollers EUR 1,100 - Double working speed EUR 700 PK 35 File type Size Min. Dia Notes 1. 60x10 40x10 500 400 Standard Rolls 2. 100x15 60x10 450 350 Standard Rolls 3. 35x35 20x20 900 300 Standard Rolls 4. Ø35 Ø30 600 400 Optional Rolls 5. Ø70x2 Ø30x2 1,000 500 Optional Rolls 6. 2”x2.9 1”x2.3 1,000 350 Optional Rolls 7. 70x30x2 50x40x3 1,200 1,200 Optional Rolls 8. 50x3 40x3 1,700 600 Optional Rolls 9. 50x50x5 40x40x5 800 600 Optional Rolls 10.50x50x6 30x30x3 1,000 500 Optional Rolls 11.60x7 30x4 700 400 Standard Rolls 12.60x7 30x4 800 500 Standard Rolls 13.60x7 30x4 700 500 Standard Rolls Isdpfx Aed Eqqwjl Njtf 14. UPN 80 UPN 30 1,000 500 Optional Rolls* 15. UPN 80 UPN 30 1,200 800 Standard Rolls* * Special washer (spacer) may be required / Only with special beam bending attachment • Capacities are based on plate yield strength of 260 N/mm²

Stanje: novo, Pressing force: 50 Bending length: 2040 mm Frame width: 2040 mm Installation height: 590 mm Max. stroke length: 300 mm Dimensions (LxWxH): 3170x1960x2500 mm Approximate weight: 4850 kg Motor power: 11 kW CNC crowning via controller: yes CNC Servo Electric Press Brake KKI Model: REVOLUTION DDM-5020 Servo-motorized Press Brake REVOLUTION Servo-electric press brakes contain no hydraulic system and represent the technology of tomorrow thanks to their flexibility and reliability. The higher speed and precision of this new generation of machines offers greater efficiency, ergonomic features, and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with various models and tonnages, Dener is a pioneer of this technology. Equipped with extensive experience and quality. Standard Equipment: KK-Industries is the general representative of the DENER group of companies. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake by KK-Industries, made by DENER: Technological Advantages: Model REVOLUTION DDM The CNC servo-electric press brake stands out for its high precision, accuracy, and versatile application possibilities. - 100% electric, 0% hydraulic oil - Up to 50% less energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy - High bending speed and significantly quieter - Full usable length between frames - Lower maintenance costs - Environmentally friendly - Operator-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard Equipment: - 3D color graphic control Delem 66 T 17" touchscreen - Y1, Y2, X, and R axes CNC-controlled via the controller - CNC crowning via 3D controller - X-axis 500 mm, R-axis stroke 150 mm for 1.5 m and 2 m models - X-axis 750 mm, R-axis stroke 250 mm for all other press brakes - We make no compromises on the punch and die: the CNC Servo Electric Press Brake KKI REVOLUTION is equipped with quality tooling from EUROSTAMP Italy. - Split gooseneck upper tool - 4-V die block 60x60 (V = 16, 22, 35, and 50 mm) - Backgauge with servo motors on linear guideways and ball screw - Naturally, every machine is only as good as its service. That’s why we focus on highly-qualified engineers with extensive experience in CNC sheet metal processing. - Laser safety device on upper beam - CE safety equipment - Operating instructions in GERMAN and ENGLISH Itedpfx Aod Etfyjl Nsf Options: - Additional controlled backgauge axes X1, X2, R, Z1, Z2, Delta X - ATF Type 6-axis backgauge, X1, X2 – R Type backgauge - X-Prime Type backgauge - Hydraulic upper and lower tool clamping systems - CNC 3D touchscreen control DELEM DA-69T We recommend the following options: - Manual crowning ¤ 2,329.00 - CNC crowning ¤ 4,658.00 KK-Industries GmbH

Stanje: novo, Pressure: 200 Bending length: 4080 mm Distance between uprights: 4080 mm Installation height: 590 mm Stroke length (max.): 300 mm Dimensions (LxWxH): 5740 x 2130 x 2680 mm Weight approx.: 13,000 kg Motor power: 22 kW CNC crowning via control: Yes CNC Servo Electric Press Brake KKI Model: REVOLUTION DDM-20040 Servo-motorized Press Brake REVOLUTION Servo-electric press brakes feature no hydraulic system and, thanks to their flexibility and reliability, represent tomorrow’s innovative technology. The increased speed and precision of this new generation of machinery deliver greater efficiency, ergonomic advantages, and environmentally friendly production processes. As the first manufacturer of servo-electric press brakes with a range of models and tonnages, Dener is a pioneer in this field – offering exceptional experience and quality. Standard Equipment: KK-Industries is the general representative for the DENER group. We have configured a high-quality model for the European market. The CNC Servo Electric Press Brake by KK-Industries, made by DENER, offers the following technological advantages (Model: REVOLUTION DDM): - 100% electric, 0% hydraulic oil - Up to 50% lower energy consumption compared to conventional hydraulic press brakes - High efficiency and precision - High bending speed and significantly quieter operation - Full working length utilization between side frames - Reduced maintenance costs - Environmentally friendly - Operator-friendly control panel - Automatic calculation of bending sequences directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Ijdpfx Alod Etf As Netf Standard features: - 3D color graphical control DELEM 66T with 17” touchscreen - Y1, Y2, X, and R axes CNC-controlled - CNC crowning via 3D controller - X-axis 500 mm / R-axis stroke 150 mm for 1.5 m and 2 m models - X-axis 750 mm / R-axis stroke 250 mm for all other press brakes - No compromise on tooling: machine comes equipped with high-quality tools from EUROSTAMP, Italy - Split gooseneck upper tool - 4-V die block 60x60 (V = 16, 22, 35, and 50 mm) - Backgauge with servomotor drive on linear guides and ball screw spindle - Premium laser safety system on upper beam - CE-compliant safety equipment - Operating manual in GERMAN and ENGLISH Options: - Additional axes on the backgauge: X1, X2, R, Z1, Z2, Delta X - ATF series 6-axis backgauge: X1, X2 - R-type and X-Prime type backgauge - Hydraulic upper and lower tool clamping - 3D touchscreen CNC control DELEM DA-69T KK-Industries GmbH

Stanje: novo, Shaft diameter: 50 mm Upper roll diameter: 152 mm Lower roll diameter: 162 mm High-performance hydraulics: 8 Working speed: 4.5 m/min Motor power: 1.1 kW Length: 810 mm Itodod Ab H Sepfx Al Nof Width: 950 mm Height: 1500 mm Approx. weight: 500 kg Technical Data: - Welded steel frame - 3 rolls are motor-driven - Hardened shafts made of special steel - Upper roll hydraulically adjustable - Horizontal and vertical working positions - Standard rolls - Guide rolls - Brake motor for precision bending - Portable control panel Options: - Digital display €700 - NC unit €7,000 - Angular side guide rolls €1,400 HPK 50 file Type Size Min. Dia Notes 1 60x10 20x10 600 300 Standard Rolls 2 100x15 50x10 600 300 Standard Rolls 3 35x35 15x15 600 300 Standard Rolls 4 Ø35 Ø20 600 300 Optional Rolls 5 Ø70x2 Ø25x1.5 1200 400 Optional Rolls 6 2”x2.9 1/2”x2.3 1000 300 Optional Rolls 7 70x30x3 30x15x2 1500 400 Optional Rolls 8 50x3 20x2 1600 400 Optional Rolls 9 50x50x6 30x30x3 600 400 Optional Rolls 10 50x50x6 30x30x3 900 600 Optional Rolls 11 60x7 30x4 600 400 Standard Rolls 12 60x7 30x4 700 400 Standard Rolls 13 60x7 30x4 700 400 Standard Rolls 14 UPN80 UPN30 800 400 Optional Rolls * 15 UPN80 UPN30 1200 600 Standard Rolls * * Special washer (spacer) may be required / Only with special Beam Bending Attachment • Capacities are based on 260 N/mm² yield strength of plate

Stanje: novo, Bending length: 2100 mm Sheet thickness: 8 mm Top roll diameter: 200 mm Technical specifications: - Rear roll driven by motor - Cone bending device - Hardened and polished rolls - The entire frame is made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rolls driven by brake electric motors and planetary gears in the gearbox - Mobile control panel - In compliance with CE standards Options: - Bottom roll driven by electric motor EUR 2,200 Iodpfx Ajd Ab Nhol Netf - Digital display for rear roll position indication EUR 1,010 - Extended rolls EUR 966 - Profile rolls EUR 1,190 We have numerous references!

Stanje: novo, Working area: 2000 x 6000 mm Loading capacity: 1850 kg X-axis travel: 2020 mm Y-axis travel: 6050 mm Laser power: 6 kW Positioning accuracy: 0.05 mm Repeatability: 0.03 mm Approx. weight: 16,000 kg Dimensions (LxWxH): 13,200 x 2,800 x 2,300 mm Table change time: 15 sec Max. speed: 120 m/min The FLC series is a fast, precise, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting machine with premium-class standards. Capable of handling up to 30,000 W of laser power, it is an excellent choice for cutting thick plates. FLC fiber laser cutting machines are commonly used in the production of agricultural machinery, textile machines, food processing equipment, construction machinery, elevators, and other large machines and installations. It is an ideal cutting machine for anyone wishing to outsource cutting operations. The system enables easy blowing, cutting, pausing, calibration simulation, etc. via wireless remote control. Standard nesting software quickly prepares parts for cutting without operator intervention, and also features a Flycut function. Equipped with a dual exchange table, allowing continuous operation with no downtime. All our machines are manufactured to European standards and have CE certification. Our FLC-type machines feature nozzle cleaning and a dual camera system. Available cutting bed sizes: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. The laser head is equipped with an autofocus and active anti-collision function, as well as an Auto-View feature, which detects obstacles and automatically repositions. Cutting heads are equipped with automatic cooling. Itedpetwtnzefx Al Nof The bridges used in all our machines are made from welded aluminum alloy sheet construction and are monolithic. The one-piece design ensures rigidity and shape retention, preventing deformation under impact, load, or overlapping. Additionally, thanks to their structure being three times lighter than steel profiles, higher speeds and acceleration can be achieved with lower motor power. Included accessories: - Water chiller - Electrical cabinet cooling - Automatic focusing head - Nesting software - 19-inch touch CNC controller - Flycut function - Nozzle and lens starter kit - Parts debris drawers - Automatic table changer - Automatic nozzle cleaning - CE conformity - On-site machine training - Wireless remote monitoring - Automatic lubrication system - Dual camera

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 6.0 mm Cutting width: 3,200 mm Itodpoh Talzsfx Al Nef Total power requirement: 7.5 kW Approximate weight: 6,250 kg Dimensions (LxWxH): 4,180 x 2,150 x 2,000 mm Technical Data: Sheet thickness: 6 mm Cut length: 3,200 mm Cutting angle: 1.30° Backgauge: motorised, 1,000 mm Motor power: 7.5 kW Length: 4,000 mm Width: 1,700 mm Height: 1,800 mm Weight: 6,250 kg Equipment: Swing beam design NC preselection control ELGO P 40 T with backgauge and cutting gap adjustment from the front via the control panel motorised backgauge up to 1,000 mm clear control panel mounted on a swing arm hydraulic hold-downs arranged close to the cutting edge foot switch cutting gap adjustment cutting line illumination wide support table with ball inserts foldable finger guard 1,000 mm 1 T-slot side stop 2 sheet support arms with T-slot simple blade change and resharpening adjustable cutting length for economic processing lower blade with four cutting edges, reversible upper blade with two cutting edges, reversible qualified customer service Operating manual in ENGLISH Machine and equipment in compliance with CE regulations

Stanje: novo, Pressure: 100 Cylinder: horizontally adjustable Stroke: 350 Frame width: 1500 Working speed: 2 Rapid traverse: 28 Length: 2400 Width: 1000 Isdpfx Aswwngysl Notf Height: 2250 Weight approx.: 1500 Cylinder horizontally adjustable: 1150 – Cylinder horizontally adjustable – 1150 mm Height-adjustable work table – conveniently adjustable via chain Safe two-hand operation – user-friendly control via hand lever and push button Adjustable maximum pressure – individually adaptable for various applications Integrated pressure gauge – allows precise pressure monitoring during operation CE-compliant design – manufactured according to current safety and quality standards Operating manual – detailed and easy to understand, available in German and English Two working speeds – for particularly precise and efficient work The image is a sample photo

Stanje: novo, Pressure: 150 tons Cylinder: horizontally adjustable Stroke: 350 mm Frame width: 1500 mm Working speed: 3 mm/s Fast forward: 22 mm/s Length: 2500 mm Width: 1200 mm Height: 2500 mm Approximate weight: 2500 kg Cylinder travel, horizontal: 1000 mm Iodswwng Tspfx Al Nstf - Cylinder horizontally adjustable – 1000 mm - Height-adjustable worktable – easily adjustable via chain mechanism - Safe two-hand operation – convenient control via hand lever and push button - Adjustable maximum pressure – can be customized for a variety of applications - Integrated manometer – allows for precise pressure monitoring during operation - CE-compliant design – manufactured according to current safety and quality standards - Operating manual – comprehensive and easy to understand, available in German and English - Two working speeds – enables especially precise and efficient operation Image for illustration purposes only.

Stanje: novo, Pressure: 70 Cylinder: horizontally adjustable Stroke: 350 mm Frame width: 900 mm Working speed: 3 Length: 1700 mm Width: 700 mm Height: 2100 mm Weight approx.: 650 kg Rapid advance: 29 Itodpjwwnhwofx Al Nof Horizontally adjustable cylinder: 550 mm – Horizontally adjustable cylinder – 550 mm Height-adjustable work table – conveniently adjustable via chain drive Safe two-hand operation – user-friendly control via hand lever and push-button Adjustable maximum pressure – can be individually set for various applications Integrated manometer – enables precise pressure monitoring during operation CE-compliant design – manufactured according to current safety and quality standards Operating instructions – detailed and easy to understand, available in German and English Two working speeds – for particularly precise and efficient operation The image is for illustrative purposes only.

Stanje: novo, Sheet length: 1100 mm Sheet thickness: 6 mm Motor: 7.5 kW Width: 2250 mm Length: 1750 mm Height: 1400 mm Iodpfx Aljgh Ndme Njtf Standard equipment: - NC control - Programmable motorized backgauge with 750 mm travel - Shadow line lighting - 1 piece angle stop with scale - 2 sheet support arms - 1 sheet support arm (for models 1106, 1306, 1505) - Finger guard - Ball transfer table - Knife angle easily adjustable from the front - Ball screw spindle - Stroke counter - Portable foot pedal with emergency stop button - Light barrier on the rear guards

Stanje: novo, Sheet length: 1560 mm Sheet thickness: 5 mm Dimensions (LxWxH): 2250 x 2250 x 1400 mm Standard equipment: - NC control unit - Programmable motorized backgauge with 750 mm travel - Shadow line lighting - 1 piece angle gauge with scale - 2 sheet support arms - 1 sheet support arm (for models 1106, 1306, 1505) - Finger guard - Ball transfer table - Blade angle easily adjustable from the front - Ball screw spindle Iedegick Ispfx Al Nstf - Cut counter - Portable foot pedal with emergency stop button - Light barrier on the rear safety guard

Stanje: novo, Blechlänge: 2060 Blechstärke: 3 Standardzubehör NC-Steuerung Programmierbarer, motorisierter Rückanschlag mit 750 mm Hub Schattenlinienbeleuchtung 1 Stück Anschlagschiene mit Skala 2 Stück Materialstützarme 1 Stück Materialstützarm (bei den Modellen 1103, 1303, 1503) Fingerschutz Schneidlinienbeleuchtung Kugelgewindetrieb Schnittzähler Tragbares Fußpedal mit Not-Aus-Schalter Lichtschranke an den hinteren Schutzvorrichtungen Itedpfx Aljgick Ss Nsf Optionen 0–180° verstellbarer Winkelanschlag: 910 EURO Pneumatisches Blechstützsystem (hinten): 3.200 EURO Lichtschranke hinten (Sicherheit): 1.620 EURO Elgo P40T Touchscreen-Steuerung: 1.960 EURO Klinge für Edelstahl (statt Standard): 1.000 EURO Ersatzklingen (Ober- und Untermesser, 1 Satz): 2.350 EURO

Stanje: novo, Shaft diameter: 580 mm Working speed: 2-5 m/min Motor power: 30 kW Length: 3000 mm Width: 2310 mm Height: 3100 mm Weight approx.: 16,500 kg Technical specifications: - Welded steel frame construction Itodpfx Ajh Alh Usl Nof - 3 driven rollers - Hardened and ground shafts made of high-strength special steel - Rollers are hardened and ground - Horizontal working position - Standard hardened rollers - Mobile control panel - Lateral angle guide rollers - Brake motor for precision bending - Digital displays (2 units) Options: - STANDARD digital display - NC unit 10” screen EURO 11,500,-- -

Stanje: novo, Working area: 2000 x 6000 mm Loading capacity: 1450 kg X-axis travel: 2020 mm Y-axis travel: 6050 mm Laser power: 12 kW Positioning accuracy: 0.05 mm Repeatability: 0.03 mm Weight approx.: 11,500 kg Dimensions (LxWxH): 10,000 x 4,400 x 2,120 mm The FLC Series is a fast, precise, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency, premium-standard laser cutting machine, supporting laser power up to 30,000 W—making it an excellent choice for cutting thick sheets. FLC fiber laser cutting machines are commonly used in the manufacturing of agricultural machinery, textile machinery, food processing equipment, construction machinery, elevators, and other large-scale machines and installations. It is an ideal cutting solution for those looking to outsource. The wireless remote control allows easy blowing, cutting, pausing, calibration simulation, and more. The standard nesting software program prepares parts for cutting extremely quickly and without manual intervention. Flycut function is also available. Featuring a double exchange table, the machine enables continuous cutting without downtime. All our machines are manufactured to European standards and CE certified. Our FLC models feature nozzle cleaning and dual camera system. Available cutting formats: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. The laser head features autofocus, active anti-collision, and an auto-view function, which detects obstacles and moves automatically. Cutting heads are equipped with automatic cooling. The bridge used on all machines is a single-piece, welded construction made of aluminum alloy plates. The monolithic structure ensures rigidity and prevents deformation from impacts, overlaps, or stresses, while its weight—three times lighter than steel-type bridges—enables high speed and acceleration with lower motor power requirements. Accessories included: - Water chiller - Electrical cabinet cooling - Automatic focus head - Nesting software - 19-inch touch CNC controller - Fly cutting - Nozzle and lens starter kit - Scrap drawers for cut parts - Automatic table exchanger - Automatic nozzle cleaning - CE conformity - On-site machine training - Wireless remote monitoring - Automatic lubrication system Itjdpfsruwb Asx Al Njf - Dual camera system

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 13.0 mm Total installed power: 18.5 kW Approx. weight: 11,700 kg Dimensions (LxWxH): 4,000 x 1,700 x 1,800 mm Technical data: - Sheet thickness: 13 mm - Cutting length: 3,200 mm - Cutting angle: 2.0° - Backgauge: motorized, 1,000 mm - Motor power: 18.5 kW - Length: 4,200 mm - Width: 2,050 mm - Height: 2,100 mm - Weight: 11,700 kg Features: - Swing cut design - NC preselection control ELGO P 40 T Touch Itodpfx Aled Ab Hme Nef - With backgauge and adjustable blade gap from the front using the EURO P 40 Touch control - Motorized backgauge up to 1,000 mm - Clearly arranged control panel mounted on a swivel arm - Hydraulic hold-downs positioned close to the cutting line - Foot switch - Blade gap adjustment - Cutting line illumination - Wide support table with ball transfers - Folding finger guard, 1,000 mm - 1 side stop with T-slot - 2 sheet support arms with T-slot - Easy replacement and regrinding of the blades - Adjustable cutting length for efficient processing - Lower blade can be turned 4 times - Upper blade can be turned 2 times - Qualified customer service - Operating manual in ENGLISH - Machine and equipment in accordance with CE regulations