Kel-Berg Ploščata Postelja nakup rabljenega (2.665)

Stanje: novo, Cutting capacity at 90 degrees: round 510 mm Cutting capacity at 90 degrees: square 480 mm Cutting capacity at 90 degrees: rectangular 610 x 450 mm Saw blade length 5320 x 34 x 1.1 mm Blade speed 15 - 100 m/min Table height 820 mm Total power requirement 3.0 kW Machine weight approx. 2.3 t Space requirement approx. 2.65 x 2.8 x 2.2 m For mitre cuts up to 45° to the left in fully automatic mode and up to 60° to the left in semi-automatic mode Material height sensor (automatic cut start detection) Podpjfu Nbbjfx Agxogk Automatic feed unit via ball screw incremental feed with automatic length compensation Sensor on the saw blade for automatic adjustment of the saw stroke Fully automatic control of saw frame and clamping device Hydraulic unit with automatic pressure switch-off in idle mode Mechanical swarf removal brush, feed vice opens on both sides Remnant piece length 100 mm Modern CNC control, freely programmable for multiple cutting jobs with various cutting lengths and quantities. Automatic feed unit, 500 mm via ball screw incremental feed with automatic length compensation. Adjustable for cut lengths from 25 – 9,999 mm. Fully hydraulic control of saw frame and clamping devices Selection of 3 different material feed rates Visualization of the entire workflow with simple data entry

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Blade speed: 15–100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space required approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to miter cut, feed regulator, and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning/disinfection) • Energy-saving and low-vibration due to miter cutting • Ergonomic, safe, free-standing control panel • Frequency-controlled saw drive 15–100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs to monitor all safety functions • Large-diameter wheels (520 mm) • Clear miter adjustment up to 60° Semi-automatic operation: Pgodpfx Aofg E Hlogxok 1. Clamp material 2. Start saw 3. Rapid downfeed to the material or, for series cuts, cut immediately 4. Saw blade off 5. Raise frame to just above the material 6. Open vise

Stanje: novo, Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.61 t Required space: approx. 1.5 x 1.75 x 1.9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table - Vise laterally adjustable Pjdpfx Aofd Abaogxegk - Solid, large material support - Automatic cooling Illustration shows semi-automatic version.

Stanje: novo, Cutting diameter: 255 mm Saw band length: 2765 x 0.9 x 27 mm Cutting width: 300 x 180 mm Blade speed: 35 + 70 rpm Total power requirement: 1.8 kW Machine weight approx.: 450 kg Space requirement approx.: 1.7 x 1.23 x 1.75 m SPECIAL OFFER PRICE!!! Double miter metal band saw, frequency inverter hydraulics, semi-automatic GBS 250 Super HA-I Easy • Miter cutting left 60° / right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox cast in one piece – very quiet and low vibration operation • Hydraulic vise, laterally adjustable • Precision industrial-grade bearings Pgodpfx Aofn Andsgxsk • Heavy-duty vise and cast frame • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Feed pressure regulator • Support roller (infeed side) • Ball-bearing mounted turntable Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid downfeed to material start, or proceed directly with cutting for serial cuts 4. Stop saw blade 5. Raise frame just above the material 6. Open vise

Stanje: novo, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangular 820 x 610 mm Saw blade length: 5850 x 41 x 1.3 mm Blade speed: 15 – 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight: approx. 4.45 t Space requirement: approx. 5.85 x 3.6 x 2.7 m 2-column bandsaw for fast cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, smooth and ergonomic sawing Specially developed for cutting profiles, beams, and solid material. Material clamping is performed vertically on both the infeed and outfeed sides. Starting with the K-tech 800H model, the machine is equipped as standard with an additional horizontal clamping vise. The interaction of the hydraulic saw frame lowering, material positioning, and the pusher system is controlled by CNC. The machines come standard with the environmentally friendly 'B&S Clean Cut cutting system' with minimal quantity lubrication, saving on cleaning effort and conserving resources. CNC Control Pedsfgyifopfx Agxogk A CNC control allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitre angles. The B&S pusher system, feed and positioning unit, is fitted with 'double-opening clamping jaws' controlled hydraulically. This ensures secure gripping and transport of materials and bundles that may deviate from the ideal form. The pusher system is constructed separately and is guided by ball-bearing linear guides, a ground rack, and a frequency-controlled, robust gear motor.

Stanje: novo, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 1250 x 600 mm Psdpfsfgyigox Agxegk Saw blade dimensions: 8140 x 54 x 1.6 mm Blade speed: 15 – 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight approx. 4.96 t Space requirements approx. 5.7 x 4.0 x 2.75 m 2-column band saw for fast cutting, K-tech 1200H, with push system P 30. P 60 (optional). Fast, smooth, and ergonomic cutting. Specially developed for cutting profiles and beams as well as solid material. Material clamping is performed vertically on both the infeed and outfeed sides. Starting from the K-tech 800 H, the machine comes standard with an additional horizontal vice. The interaction of hydraulic saw frame descent, material positioning, and the pusher system is CNC-controlled. The machines come standard with the environmentally friendly "B&S Clean Cut cutting system" with minimum quantity lubrication. This reduces cleaning effort and conserves resources. CNC control A CNC control allows programming of up to 90 cutting programs with different cutting lengths, quantities, and mitre angles. The B&S pusher system, feeder, and positioning system is equipped with "double-sided opening gripper jaws" that are hydraulically actuated. This ensures safe gripping and transport of materials and bundles that deviate slightly from the ideal shape. The pusher system is built as a separate unit and is guided via ball-bearing linear guides, a precision-ground rack, and a frequency-driven, robust geared motor.

Stanje: novo, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 870 mm Band speed: 18 - 110 m/min Control system: CNC Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.63 t Space required: approx. 1.8 x 1.85 x 1.85 m Mitre band saw, fully automatic GBS 255 Super VA-I CNC • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cutting start detection) • Frame and gearbox made from a single casting, very quiet and low-vibration cutting • Removable chip tray (for cleaning/disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High-performance positioning with incremental encoder (CNC) • Excellent accessibility to saw, material, and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic cutting! • Optimize workflows through CNC control Pgodpfxsd Iipzs Agxsk Input options for various parameters such as quantity and material length, automatic offset calculation for the cutting channel • CNC control for 10 different sawing programs with 99 sub-programs each for different lengths and quantities (e.g. 1 sawing program with various section lengths) • Automatic feeding unit (CNC) via ball screw with incremental feed and automatic length compensation. Adjustable for section lengths from 2 mm to 9,999 mm, remnants length 170 mm.

Stanje: novo, Cutting range at 90 degrees: round 680 mm Cutting range at 90 degrees: square 640 mm Cutting range at 90 degrees: rectangle 820x610 mm Cutting range at 45 degrees: round 550 mm Pedsfg E Hmspfx Agxjgk Cutting range at 45 degrees: square 550 mm Cutting range at 45 degrees: flat 550x600 mm Cutting range at 60 degrees: round 370 mm Cutting range at 60 degrees: square 370 mm Cutting range at 60 degrees: flat 370x600/450 mm Saw blade length 7260 x 41 x 1.3 mm Blade speed 15 - 100 m/min Table height 800 mm Total power requirement 5.5 kW Machine weight approx. 4.8 t Space requirement approx. 5.85 x 3.7 x 2.7 m 2-column double-mitre band saw for rapid cutting with pusher system P15. Option: P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new “B&S positioning system”. An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake, featuring large-radial center positioning. The work table is mounted with high-quality preloaded bearings to ensure very smooth rotation. CNC control A CNC control allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitre angles. Dual-side gripping positioning system The B&S pusher system, feeding and positioning device, is equipped with “dual-side opening grippers” which are hydraulically controlled. This ensures secure gripping and transport of materials and bundles that may deviate slightly from the ideal shape. The pusher system is structurally separate and guided via ball-bearing linear rails, a precision-ground rack, and a robust, frequency-driven gear motor.

Stanje: novo, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 1250 x 600 mm Cutting capacity at 45°: round 680 mm Cutting capacity at 45°: square 600 mm Cutting capacity at 45°: flat 870 x 600 mm Cutting capacity at 60°: round 580/550 mm Cutting capacity at 60°: square 530/450 mm Cutting capacity at 60°: flat 550 x 450 mm Saw blade length 8140 x 54 x 1.6 mm Band speed 15 - 90 m/min Table height 855 mm Total power requirement 7.5 kW Machine weight approx. 5.3 t Space requirement approx. 5.75 x 4.2 x 2.75 m 2-column double mitre bandsaw for fast cutting with Pusher System P15. Option P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new "B&S positioning system". An intelligent NC control ensures seamless interaction of linear encoder and self-braking positioning motor in combination with reliable hydraulic braking via large-radial centre positioning. The work table is mounted on high-quality preloaded bearings, which ensure extremely smooth rotation. Pjdpfxefg E Hne Agxegk CNC control A CNC control enables programming of up to 90 cutting programs with different cutting lengths, quantities and mitre angles. Positioning system with double-sided clamps The B&S pusher system—feeding and positioning system—is equipped with double-sided hydraulic gripping tongs. This ensures secure gripping and transportation of materials and bundles deviating slightly from the ideal shape. The pusher system is a separate unit and is guided by ball-bearing linear guides, ground rack, and a frequency-driven robust gearbox motor.

Stanje: novo, Cutting capacity at 90°: round 105 mm Cutting capacity at 90°: square 100 mm Cutting capacity at 90°: rectangular 100 x 105 mm Saw band dimensions: 1335 x 13 x 0.65 mm Dimensions (L x W x H): 650 x 310 x 300 mm Band speed: 30 - 80 m/min Total power requirement: 0.95 kW Machine weight: approx. 18 kg Pjdpfx Agefv Aq Rexjgk Special Offer Price!! Berg & Schmid - Portable Band Saw PBS 90 ESC High-performance and particularly robust metal band saw with aluminum die-cast saw table and stepless cutting speed for mitre cuts up to 60° Shipping cost share: 25 EUR Images show identical PBS 110 model.

Stanje: novo, Cutting range at 90°: round 310 mm Cutting range at 90°: square 280 mm Cutting range at 90°: rectangular 400 x 250 mm Saw blade length: 4020 x 34 x 1.1 mm Blade speed: 18 - 100 m/min Table height: 890 mm Total connected load: 2.2 kW Machine weight approx. 0.99 t Space requirement approx. 1.85 x 2.2 x 2.0 m Mitre band saw, fully automatic, GBS 310/400 VA-I CNC • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from a single casting, very quiet operation with minimal vibration Psdpfx Agsd Iiproxjgk • Removable chip tray (disinfection) • Impact-resistant and ergonomic control panel with oil-resistant EPDM cover • Top access to saw, material and feed unit • Safety cover can be folded up • Fine feed adjustment • Semi-automatic cut! • Optimize workflows with CNC control Input options for various parameters such as quantities and material lengths, automatic calculation of the kerf • CNC control for 10 different saw programs with 99 subprograms for various lengths and quantities, e.g., one cutting program with various cut lengths • Automatic feed unit (CNC) via ball screw incremental feed with automatic length compensation. Adjustable for cut lengths from 2 mm to 9,999 mm, remnant length 170 mm.

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions L x W x H: 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-level sawing technology and optimal performance for cutting special steels. • The electro-welded machine frame and steel saw frame fulfill all cutting requirements and eliminate vibrations and noise. • The chip conveyor is hydraulically driven and speed adjustable. Pjdpfx Agsfg E Hpexsgk • All machine movements (saw frame, vice, feed, saw band guides) operate using modern linear guides with high static and dynamic load capacity, ensuring extremely low sliding friction. • Another key feature is the material positioning rollers, driven by a hydraulic motor. They move at a right angle to the material, allowing optimal material clamping. • Thanks to the height control of the saw band position, the operator can place the band close to the top of the material. After the cut, the band automatically returns to its previous position. Remaining in the lower position can also be selected as an alternative. During the cutting cycle, the software compares cutting load with preset parameters, allowing the sawing system to stop if irregularities are detected. • The saw band is cleaned by two adjustable steel brushes, driven hydraulically. • The hydraulic unit, including filter and pressure gauge, ensures exceptionally smooth operation at constant pressure. • Finely ground carbide inserts that clamp the saw band, complete with side-hardened and adjustable guide rollers. The adjustable band guide moves automatically as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder controlled by the machine software. Tension is automatically relieved after a set period if the machine is in standby mode or after a cycle has finished. • Automatic CNC-controlled versions are available in the X-TECH 900 / 1200 models, with a feed length of 500 mm for the high-production series. • The material is supported by a table with seven rollers, driven by a hydraulic orbital motor, to ensure precise positioning even under maximum load. • All guided movements are operated by four recirculating ball guides with a high capacity for static and dynamic loads, significantly reducing feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: novo, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 870 mm Band speed: 18 - 110 m/min Total power requirement: 1.5/1.8 kW Machine weight approx. 0.63 t Space requirement approx. 1.8 x 1.85 x 1.85 m Mitre band saw, fully automatic GBS 250 Super VA-I MPS • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) Pjdpfxjd Iip Ao Agxjgk • Shock-resistant and ergonomic control panel with oil-resistant EPDM cover (a). • Material height sensor (c). (Automatic cut start detection) • Frame and gearbox cast in one piece, very quiet cutting and low vibration • Removable chip tray (for cleaning/disinfection) • Excellent accessibility to saw, material, and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic cut! Automatic sawing with microprocessor control Adjustable for 2 program levels Semi-automatic operation Fully automatic operation Start after entering required quantity and length: material infeed, cutting process, and piece counting until the program is completed • MPS control for setting the required number of feed strokes • All important machine data is displayed on the LED display during the cutting process (power consumption, cutting time, quantity) • Entered data is stored in RAM memory • The self-diagnostic circuit automatically displays any irregularities as error messages and monitors the entire process • Feed unit mounted on floating bearings • Length adjustment via handwheel and vernier with mechanical position display. Adjustable for cut lengths from 2.5 mm to 420 mm, or by reverse feed function, repeatable 1 - 29 times, remaining workpiece length 210 mm

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350x200 mm Saw band length 3375x27x0.9 mm Band speed 18 - 100 m/min Table height 880 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.84 t Space requirement approx. 1.85 x 1.9 x 2.0 m Fully automatic mitre band saw Pgsdpsupw R Asfx Agxek • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • One-piece cast frame and gearbox, extremely quiet and low-vibration cutting • Removable chip tray (for cleaning/disinfection) • Shock-resistant and ergonomic control panel with oil-resistant EPDM cover • Excellent accessibility to saw, material, and feed unit • Folding safety cover • Fine feed adjustment • Semi-automatic cut! • Optimize workflow with CNC control Parameters such as quantity and material lengths can be entered, with automatic kerf compensation • CNC control for 10 different sawing programs with 99 subprograms for various lengths and quantities, e.g. one cutting program with various section lengths • Automatic feed unit (CNC) via ball screw incremental feed with automatic length compensation. Adjustable for cut-off lengths from 2 mm to 9,999 mm, remnant length 170 mm. Included: - Micro-spray unit - Leveling elements

Stanje: novo, Cutting capacity at 90°: round 310 mm Cutting capacity at 90°: square 280 mm Cutting capacity at 90°: rectangular 400x250 mm Saw blade length 4020x34x1.1 mm Blade speed 37 + 74 m/min Table height 940 mm Total power requirement 1.8/2.2 kW Machine weight approx. 0.68 t Space requirement approx. 1.5 x 1.78 x 1.3 m SPECIAL PRICE!!! Double miter bandsaw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • Mitre left 60° + right 45° • Industrial hydraulics, powerful 18 bar • Optimum access to material • Ammeter for monitoring: - Cutting force optimization - Blade service life - Cutting performance • Vice opens/closes hydraulically • Chip removal brush • Material rotary table with ball bearings • Quick-release vice, adjustable • Material height sensor (automatic detection of cutting start) Pgsdpfsd Iiptsx Agxjk Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid descent to material start, or direct cutting in serial operation 4. Switch off saw blade 5. Raise frame just above material 6. Open vice

Stanje: novo, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangular 290 x 210 mm Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 / 70 m/min Total power requirement: 1.1/1.3 kW Pjdpfxod Iip Rj Agxjgk Machine weight approx. 0.35 t Required space approx. 1.3 x 0.8 x 1.5 m SPECIAL OFFER PRICE!!! Double mitre metal bandsaw, hydraulic semi-automatic, equipped with: - Hydraulic vice - Material height sensor - Cut monitoring via ammeter - Adjustable cutting pressure feed regulator - Band speed 34 / 74 m/min - Mitre cuts up to 60° left and 45° right - Patented ball-bearing turntable for easy mitre adjustment - Rapid-action vice, movable - Quick-release lever - Automatic coolant system Shipping cost share: 120 EUR

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 10/2021, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.440 mm, višina nakladalnega prostora: 2.670 mm, skupna dolžina: 13.900 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 275/70R22,5, barva: drugo, Leto izdelave: 2021, Oprema: ABS, dvižna zadnja plošča, = Additional Options and Equipment = Pgedpfeyz Nt Nex Agxsk - EBS (Electronic Braking System) - Tail lift = Remarks = Number of axles: 2, twin tires, chassis type: complete chassis, chassis material: steel, kingpin size: 2-inch, suspension type: full air suspension, ABS, EBS, body year: 2021, axle type: SAF, tail lift, tail lift type: rear flap, tail lift capacity: 1500 kg, tail lift material: aluminum, tail lift dimensions: 200x254, MAKE IS KEL-BERG / TRIDEC STEERING / TAILLIFT = Further Information = General Information Cab: Day cab Registration plate: KLEYN1 Driveline Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tyre size: 275/70R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: twin tires; lift axle; tire tread left inner: 9 mm; tire tread left outer: 9 mm; tire tread right inner: 7 mm; tire tread right outer: 8 mm Axle 2: twin tires; steered; tire tread left inner: 9 mm; tire tread left outer: 12 mm; tire tread right inner: 12 mm; tire tread right outer: 13 mm Functional Tail lift: rear flap, 1500 kg capacity Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Visual condition: average Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent used vehicle dealers. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range covers all European brands, years, and price categories. Why buy at Kleyn Trucks? Simple! • Large, fast-rotating stock • Verified quality • Good prices • Ethical business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The assurance of “recognizable quality” • And more... Visit our website for special offers and the complete stock list: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask us directly about our European warranty packages.

Stanje: rabljeno, Leto izdelave: 2003, Kotel na sekance Schmid UTSR 1600kW, moč 1600kW, premikajoča rešetka, letnik 2003, maks. zavarovalna temperatura 110°C, vključno s hidravličnim podajalnikom, odstranjevanjem pepela in krmiljenjem. Napravo je treba za prevoz razstaviti. Ni priloženo: - Premični pod Pgjdpfx Asvyrwpsgxjk - Verižni transporter - Dimnik

Stanje: zelo dobro (rabljeno), Premer žaginega lista: 370 mm Območje reza pri 90° okroglo: 120 mm kvadratno: 100 mm pravokotno: 180 x 100 mm pri 45° okroglo: 120 mm kvadratno: 100 mm pri 60° okroglo: 110 mm kvadratno: 90 mm Pgjdpex Ek A Tefx Agxsk 2 hitrosti vrtenja žaginega lista: 15/70 vrt/min Pogonski motor: 400 V, 1,8/2,2 kW Potrebni prostor: 1000 x 1000 x 1800 mm Teža: 390 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Cutting diameter 305 mm Cutting range at 90 degrees: flat 350 x 200 mm Cutting range at 45 degrees: round 250 mm Cutting range at 45 degrees: flat 230 x 200 mm Cutting range at 60 degrees: round 175 mm Cutting range at 60 degrees: flat 170 x 100 mm Cutting speed 18 - 110 m/min Vice max. 350 mm Saw blade dimensions 3370 x 27 x 0.9 mm Motor power 1.5 / 1.8 kW Machine weight approx. 880 kg Dimensions L-W-H 1700 x 2200 x 2000 mm Equipment: - sturdy, electro-hydraulic fully automatic band saw - user-friendly controls - miter cuts to the left up to 45° . possible in automatic operation - miter cuts up to 60° . possible only in semi-automatic operation Pedpsyy A Hyofx Agxsgk - hydraulic unit with automatic pressure shut-off in idle mode - stationary base frame with large chip drawer and automatic coolant system - stepless saw band speed adjustment (ESC) - rotating chip brush - minimum remnant piece 80 mm - operating manual (PDF)

Stanje: novo, Cutting diameter: 220 mm Saw band length: 2455 mm Table height: 850 mm Cutting width: 230 mm Cutting speed: 25 - 80 m/min Saw band dimensions: 2455 x 27 x 0.9 mm Cutting capacity at 60° round: 90 mm Cutting capacity at 60° square: 90 mm Cutting capacity at 60° flat: 90 x 100 mm Cutting capacity at 45° round: 150 mm Cutting capacity at 45° square: 150 mm Cutting capacity at 45° rectangular: 150 x 210 mm Cutting capacity at 90° round: 220 mm Pgsdpfxed Iip To Agxsk Cutting capacity at 90° square: 210 mm Cutting capacity at 90° rectangular: 230 x 185 mm Total power requirement: 1.2 kW Machine weight: approx. 0.24 t Space requirement: approx. 1.2 x 0.6 x 1.7 m SPECIAL OFFER PRICE!!! -Mitre cuts up to 60° to the left -Cutting speed 25 - 80 m/min -Vice with quick-release mechanism -Carbide saw band guide -Band tension control -Electric coolant system Auto-Cut System = 3-stage system: -Automatic saw frame descent via hydraulic cylinder -Infinitely variable feed rate -With limit switch -Rapid descent of the saw frame from home position to workpiece, then switches to normal feed rate -Manual operation

Stanje: novo, Saw blade diameter: 300 mm Cutting capacity at 90 degrees: round 102 mm Cutting capacity at 90 degrees: square 90 mm Cutting capacity at 90 degrees: flat 120x80 mm Cutting capacity at 45 degrees: round 90/80 mm Cutting capacity at 45 degrees: square 80/70 mm Cutting capacity at 60 degrees: flat 90x70/85x70 mm Total power requirement: 1.5/2.0 kW Machine weight: approx. 0.135 t Space requirement: approx. 0.5 x 1.05 x 1.0 m The versatile professional metal circular saw. Outstanding in both performance and price. · For mitre cuts to the left up to 45° · Suitable for cutting steel, stainless steel, and to a limited extent, aluminium profiles · Spindle vise with double clamping arm for burr-minimized cuts · Taper safety clutch to protect saw blades · Two speeds: 33 + 66 rpm · Automatic cooling system, direct to the saw blade · Double-bearing saw head · 24 V safety switch in the handle with restart protection · Length stop, assembly tools included · Fully enclosed, robust cast construction · Mitre adjustment on operator's side · Machine base (optional) ATTENTION: Price does NOT include a saw blade!!! (Saw blade price: €93 / €123) Pgsdsfg Rlaepfx Agxsk

Stanje: rabljeno, Saw blade diameter: 400 mm Cutting capacity at 90°: round 110 mm Cutting capacity at 90°: square 100 mm Cutting capacity at 90°: flat 200x60 mm Cutting capacity at 45°: round 100 mm Cutting capacity at 45°: square 100 mm Cutting capacity at 45°: rectangular 140x60 mm Total power requirement: 1.5 kW Machine weight: approx. 130 kg Dimensions (L x W x H): 0.8 x 0.7 x 1.3 m SPECIAL PRICE!! Underfloor aluminium circular saw, hydro-pneumatic semi-automatic. · Maintenance unit for pneumatic control · Ball bearing rotary table · Extraction nozzle for chip extraction system · 2 pneumatic vertical clamps · 180° swivel range Podpsd Iinxofx Agxjgk · Adjustable rear material stop = extendable cutting range · Stepless adjustable saw blade feed · Two-hand safety control · Horizontal clamps (option) · Mist spray unit for coolant emulsion · Motor brake · Machine base frame · For profile cutting, the use of our B & S Coolmatic Plus is mandatory · Saw blade optional

Stanje: novo, Pressure: 17.0 kN Stroke: 40 mm Throat depth: 110 mm Working height (min–max): 70–220 mm Table size: 190 x 140 mm Spindle diameter: 30 mm Machine weight approx.: 60 kg Dimensions (L x W x H): 310 x 190 mm Pgodpfxjfv Avve Agxjk Toggle-lever pneumatic presses Including fine adjustment of working height via bevel gear and side crank — convenient and easy to set. Toggle-lever pneumatic presses are used when maximum pressing force is required just before the end of the stroke, e.g. for assembly, punching, embossing, riveting, etc.

Stanje: novo, Saw blade diameter: 370 mm Cutting capacity at 90° (round): 120 mm Cutting capacity at 90° (square): 100 mm Cutting capacity at 90° (rectangular): 180 x 100 mm Working height: 925 mm Saw blade speeds: 15+30 or 30+60 rpm Total power requirement: 1.8 / 2.2 kW Machine weight: approx. 0.44 t Space requirement: approx. 0.8 x 1.1 x 2.1 m SPECIAL PRICE!!! High-performance vertical circular saw, hydropneumatic semi-automatic (20185/20188) · Mitre cuts: left 60° / right 45° · Vise with double clamping arm · Robust prism guide for saw head, dovetail guide adjustable · Chip brush · Automatic cooling Pgsdjd Iin Ijpfx Agxok · Metal tension wheel for high power transmission · Heavy-duty, robust cast iron table Semi-automatic operation: 1. Clamp material 2. Start saw 3. Fast lowering to material start or cut directly in series mode 4. Saw band off 5. Raise frame slightly above material 6. Open vise MPS control: · Storage of cut start/end · Display of power consumption, piece count, cutting time, etc. · Adjustable water cooling · Cutting pressure regulator PLEASE NOTE: Price does not include saw blade! (Saw blade price: €204)