Interwood Hop nakup rabljenega (488)

Stanje: dober (rabljeno), HSK giljotinske škarje Nsdew Up Ufjpfx Abrelc Proizvajalec: Huttenlocher u. Schäfer GmbH Letnik: 2011 Dolžina reza: 1650 mm Debelina pločevine: 3,9 mm

Stanje: zelo dobro (rabljeno), Note: The images are for illustrative purposes to clarify the material. - The workbench frames are picked unassembled; - The typical production time is approx. 3 - 5 working days. Basic dimensions: Width: approx. 5,950 mm Height: approx. 940 mm Depth: approx. 850 mm Scope of delivery includes: 04x square tube, used Material color: Sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS sigma profile, used Material color: Sendzimir galvanized CS sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 5,650 mm 02x CS sigma profile, used Material color: Sendzimir galvanized CS sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 5,950 mm Chipboard depth: approx. 850 mm Surface: possibly coated (possibly two-piece) 08x mounting brackets, new Design: Sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (D x W x H) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Njdpfxotk Ikmo Abrolc Design: galvanized Dimensions: 6.3 x 70 mm 32x bolts: M12 32x nuts: M12 32x flat washers: M12 Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, it will incur additional costs, which can be requested from us depending on the place of delivery and delivery scope.

Stanje: zelo dobro (rabljeno), Note: The images are for material illustration purposes only. - The workbench frames are packaged unassembled; - The typical production time is approximately 3–5 working days. Basic Dimensions: Width: approx. 3,300 mm Height: approx. 940 mm Depth: approx. 850 mm Scope of delivery includes: 04x Square tube, used Material finish: Sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drilling pattern: 75 x 50 mm Drill hole diameter: 13 mm 02x CS Sigma profile, used Material finish: Sendzimir galvanized CS-Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 3,000 mm 02x CS Sigma profile, used Material finish: Sendzimir galvanized CS-Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x Chipboard panel, used Chipboard thickness: 38 mm Chipboard width: approx. 3,300 mm Chipboard depth: approx. 850 mm Surface: possibly coated (possibly in two parts) 08x Mounting brackets, new Finish: Sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (D x W x H) Outer hole spacing: approx. 250 mm Inner hole spacing: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-tapping screws, new Finish: galvanized Dimensions: 6.3 x 70 mm Nlsdpfetk Irkex Abrjc 32x Bolts: M12 32x Nuts: M12 32x Washers: M12 Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Any transport or shipping beyond this is subject to additional charges, which can be requested separately from us depending on the delivery location or scope of delivery.

Stanje: zelo dobro (rabljeno), Note: The images are provided for illustrative purposes only. - The workbench frames are picked and supplied unassembled; - The standard production time is approximately 3 - 5 working days. Basic dimensions: Width: approx. 3,200 mm Height: approx. 940 mm Depth: approx. 850 mm Scope of delivery includes: 04x square tubes, used Material finish: sendzimir galvanized Profile height: approx. 900 mm Box section: 140 x 140 x 4 mm Drilling pattern: 75 x 50 mm Drill diameter: 13 mm 02x CS Sigma profile, used Material finish: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 2,900 mm 02x CS Sigma profile, used Material finish: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard panel, used Chipboard thickness: 38 mm Chipboard width: approx. 3,000 mm Chipboard depth: approx. 850 mm Surface: possibly coated (possibly two-piece) 08x mounting brackets, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (D x W x H) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x bolts: M12 32x nuts: M12 32x washers: M12 Nsdpfx Abstk Iwaerslc Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be specified separately depending on the delivery location and scope upon request.

Stanje: zelo dobro (rabljeno), Note: The images are for illustrative purposes regarding the material. - The workbench frames are compiled unassembled; - The production time is generally approximately 3 to 5 working days. Basic dimensions: Width: approx. 2,000 mm Height: approx. 940 mm Depth: approx. 850 mm Scope of delivery includes: Nodjrtqm Djpfx Abrolc 04x Square tube, used Material finish: Sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drilling pattern: 75 x 50 mm Drill hole diameter: 13 mm 02x CS sigma profile, used Material finish: Sendzimir galvanized CS-Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 1,700 mm 02x CS sigma profile, used Material finish: Sendzimir galvanized CS-Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x Particleboard, used Particleboard thickness: 38 mm Particleboard width: approx. 2,000 mm Particleboard depth: approx. 850 mm Surface: possibly coated (possibly two-piece) 08x Mounting brackets, new Design: Sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (D x W x H) Outer hole spacing: approx. 250 mm Inner hole spacing: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm 06x Self-drilling screws, new Design: galvanized Dimensions: 6.3 x 70 mm 32x Bolts: M12 32x Nuts: M12 32x Washers: M12 Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transportation or shipping of this item is required, additional costs will apply, which can be individually determined depending on the delivery location or scope of delivery upon request.

Stanje: zelo dobro (rabljeno), Note: The images are for illustrative purposes only and demonstrate the material. - The workbench frames are shipped unassembled; - Typical production time is approximately 3–5 working days. Basic dimensions: Width: approx. 2,750 mm Height: approx. 940 mm Depth: approx. 850 mm Scope of delivery includes: 04x Square tube, used Material finish: Sendzimir galvanized Profile height: approx. 900 mm Box section: 140 x 140 x 4 mm Hole pitch: 75 x 50 mm Hole diameter: 13 mm 02x CS sigma profile, used Material finish: Sendzimir galvanized CS sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 2,450 mm 02x CS sigma profile, used Material finish: Sendzimir galvanized CS sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x Chipboard panel, used Chipboard thickness: 38 mm Chipboard width: approx. 2,750 mm Chipboard depth: approx. 850 mm Surface: possibly coated (may be two-piece) 08x Mounting brackets, new Finish: Sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (D x W x H) Outer hole spacing: approx. 250 mm Inner hole spacing: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Nljdjtk Iwpepfx Abrsc Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x Bolts: M12 32x Nuts: M12 32x Washers: M12 Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Any further transport or shipping of this item is subject to additional costs, which can be requested separately from us depending on the delivery location and scope.

Stanje: novo, Hub: max. 450 Vgrajena višina: max. 900 Moč motorja: 22 Moč črpalke: 48 Polnjenje olja: 120 Dimenzije (D׊×V): 3300×1250×2900 Teža pribl.: pribl. 4200 Premer valja: Ø 360 Tlak: 400 - Nastavitev tlaka preko vrtljivega regulatorja - Motorizirano upravljanje s pomočjo ročice - Ročno premičen valj - Svetla odprtina: 1600 × 550 mm - Zvezda-trikotno stikalo za pogon motorja - Hidravlični rezervoar skupaj z motorjem je nameščen ob strani spodaj na ogrodju Možnosti / dodatna oprema (doplačila): - Ventil za regulacijo tlaka: 400,00 € - Ventil za regulacijo hitrosti: 400,00 € - Varnostni zapor za bat: 250,00 € Nlodpfeutuy Aox Abroc - Ročni volan za premični valj: 950,00 € - Valj premičen preko menjalnega motorja: 1.700,00 € - Podložna plošča mize (1300 × 850 × 150 mm): 3.300,00 € *Vse slike so namenjene izključno ponazoritvi in so simbolne fotografije. Dejanska oprema se lahko nekoliko razlikuje*

Stanje: rabljeno, Leto izdelave: 1992, Tehnične podrobnosti: Obratovalna napetost: 400/50 V/Hz Priključek za stisnjen zrak: 7 bar Krmiljenje: - Največja stisna sila: 340–375 t Skupna priključna moč: 15 kW Približna teža stroja: 1,4 kg Dimenzije stroja: 1,4 x 0,8 x 1,6 m Nledpfx Absxv Awzjrjc Stiskalnica za cevi in crimp stiskalnica ·Serijska proizvodnja hidravličnih cevi (delavnica, popravilo, proizvodna linija). ·Robustna izvedba, visoka stisna sila, primerna za velike premere cevi in visokotlačne armature. ·Čisto delo zaradi ležajev brez maziva/tehnologije – daljša življenjska doba, manj umazanije na obdelovancih. Delovno območje: vsi cevi do 6SP (SAE 100R 13-14) in prešane armature do DN 125 oziroma I.D. 5 Območje stiskanja od D=9 do D=180 mm Stiskalno orodje: dvoklinasti sistem (patenti doma in v tujini) Maksimalen stiskalni hod D=20mm Maksimalen nastavitveni hod D=10mm Število stiskalnih programov: 3

Stanje: rabljeno, Leto izdelave: 1992, Tehnične podrobnosti: Nljdpfxjy N R Hme Abrsc Krmiljenje: -

Stanje: novo, This motorized 60-ton workshop press features a movable cylinder (left-right) and a height-adjustable worktable. Equipped with pressure control, two speeds, a joystick, and a manual pump for precision pressing tasks. European-made Electric 60-ton workshop press, manuf. RHTC – type M/H-M/C-2 This motorized 60-ton workshop press has a movable cylinder (left-right) and a height-adjustable worktable. It is equipped with pressure control, two speeds, a joystick, and a hand pump for precise pressing duties. The workshop press is manufactured in the Netherlands. Features - Movable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Hydraulic unit with two speeds - Height-adjustable worktable - Joystick for cylinder operation - Manual pump for precise pressing Options: - Foot pedal or remote hand control for operating this 60-ton workshop press - Set of V-blocks for additional support Nodpfx Abswfcq Norjlc

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Prodaja se težka industrijska kapa/nihalna žaga proizvajalca Pfeiffer Mannheim. Stroj je opremljen z dolgo valjčno stezo in sistemom za ustavljanje, ter je idealen za odrezovanje lesa in tramov na mero. Robustna industrijska izvedba iz litega železa/jeklene konstrukcije. Izvedba za trifazni tok. Nsdpfx Abjy U Hnksrelc Stanje: rabljeno, glede na starost. Stroj je iz obratovanja. Ogled možen po dogovoru. Prodaja brez garancije ali jamstva. Prevzem samo osebno. Nalaganje je lahko podprto na lokaciji.

Stanje: rabljeno, Technical Data – Input Hopper with Hydraulic Walking Floor and Bag Opener for Recyclables from Yellow Bags and Commercial Waste: Manufacturer: BRT HARTNER GmbH Model: HP5-3035 Year of manufacture: 2015 Hopper volume: 30 m³ Drive power: 17.5 kW Dimensions (current state): 13,200 x 3,050 x 4,350 mm (L x W x H) Machine Condition: The input hopper with bag opener was previously used at a large recycling facility, where recyclables from yellow bags or commercial waste were loaded into the hopper by wheel loaders. The bags were opened by the bag opener, with the recyclables either fed into a sorting plant or commercial waste transferred for further processing in a metered manner. The system operated flawlessly until it was dismantled and replaced with a larger unit with higher throughput capacity. The machine was disassembled into individual components in our workshop, partially refurbished, reassembled, and tested under operating conditions. The following refurbishment work was carried out and the following spare parts were replaced: - Disassembly of input hopper and bag opener into individual components; cleaning, partial sandblasting, priming, and painting of steel parts. - Various wear and cover plates were newly fabricated and installed. - Removal of worn ends (approx. 40 cbm) of walking floor tubes. Welding and smoothing of new tubes. - Complete replacement of the sliding plastic plates for the hydraulic walking floor. - Removal of the hydraulic unit from the walking floor, draining of the hydraulic oil tank, replacement of oil filters, refill with new hydraulic oil. - Renewal of all three hydraulic blocks, all valves, sight glass and all hydraulic hoses from the hydraulic unit. Nlsdoy Urtfspfx Abrjc - On all three walking floor hydraulic cylinders, the seal sets and hydraulic hoses were replaced. - All six end switches (proximity sensors) of the walking floor were replaced. - The conveyor chains on both left and right sides of the drag chain conveyor were renewed. - Seven driver slats of the drag chain conveyor were replaced. - The drive motor of the tearing discs was replaced. - All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and fittings were renewed. - All sliding plastic plates for the hydraulic adjustment of the bag opener were replaced. The bag opener can be moved in depth to allow the system to be used for commercial or residual waste without utilizing the bag opener. - On both sides, the lateral collision protection plates were replaced. - Various wear parts of the bag opener were replaced. - The entire system was electrically rewired and connected. - The system control in the switch cabinet was retrofitted by BRT Hartner to autonomous single control and the standard program was reinstalled into the control system. - The system was commissioned and tested by BRT Hartner, see the function video. Notes: Documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is available. Inspection by appointment. We accept no liability for technical information or possible errors.

Stanje: rabljeno, Mitralna hladna krožna žaga WMW (VEB DDR) Tov. št. 189886 Leto izdelave 1989 Nlsdpfx Ajy Ra D Djbrjc Premer žaginega lista max. 300 mm Območje reza pri 90° okroglo pribl. Ø 75 mm Kvadratno pribl. 70 x 70 mm Območje reza pri 45° okroglo pribl. Ø 55 mm Kvadratno pribl. 50 x 50 mm Vpenjalna širina primeža: 100 mm Hitrost žaginega lista: 31,5 obr/min Moč motorja: 0,37 kW Priključek: 230 V, 50 Hz - Nastavitev kota mitre do 45° - Materialni primež - Nameščen žagin list Ø 275 mm Potrebni prostor (d x š x v): 600 x 600 x 700 mm Teža: 47 kg V dobrem stanju

Stanje: novo, stiskalna sila: 250 t, hod: 400 mm, - Hod cilindra 400 mm Njdpfx Aegg Nygsbrolc - Delovna širina 1200 x 450 mm - Cilinder je premičen - Prikaz tlaka - Z V-bloki - Nujna zaustavitev - Teža 2250 kg - Moč motorja 7,5 kVA - Dokumentacija - 400 V

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), Manufacturer: various (European Union) Year of manufacture: 2000 Tube diameter: 40 – 150 mm Wall thickness: 1 – 4 (5) mm Reference material (tensile strength): 1,000 N/mm² Tube length at infeed: 4 – 10 m Tube length at outfeed: 4 – 8 m Bundle weight: max. 3,000 kg Bundle diameter: max. 600 mm Working direction: left → right Line configuration: Nljdpfjmqkt Tsx Abrec • Tube bundle loading station I with separation unit MAIR • Tube straightening machine (10 rolls) BRONX Model 10Cr.6-BWS • Tube bundle loading station II with separation unit MAIR • Wet separator HANDTE • Tube bundle loading station III with separation unit MAIR • Tube inspection line (eddy current/ultrasonic) ATM/KRAUTKRÄMER/FÖRSTER • Multi-head sawing system MAIR Model MC150/7/10 • Tube end finishing machine MAIR • Brushing machine MAIR • Discharge/loading MAIR • Tube bundle loading station MAIR • Tube strapping system MAIR/ORGAPACK • Emulsion processing unit SCHOENAUER • Siemens S7 control system • Hydraulic system

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), Manufacturer: Various (European Union) Year of manufacture: 2000 Tube diameter: 40 – 150 mm Wall thickness: 1 – 4 (5) mm Reference material (tensile strength): 1,000 N/mm² Tube length (feed): 4 – 10 m Tube length (removal): 4 – 8 m Bundle weight: max. 3,000 kg Bundle diameter: max. 600 mm Direction of operation: left → right Nodpfx Abomqkubsrolc Line configuration: • Tube bundle loading station I with MAIR singling unit • Tube straightening machine (10 rollers) BRONX Type 10Cr.6-BWS • Tube bundle loading station II with MAIR singling unit • Wet separator HANDTE • Tube bundle loading station III with MAIR singling unit • Tube inspection section (eddy current/ultrasonic) ATM/KRAUTKRÄMER/FÖRSTER • Multi-head sawing unit MAIR Type MC150/7/10 • Tube end processing unit MAIR • Brushing machine MAIR • Discharge/loading unit MAIR • Tube bundle loading station MAIR • Tube bundle strapping unit MAIR/ORGAPACK • Emulsion preparation unit SCHOENAUER • Siemens S7 control system • Hydraulics

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), Manufacturer: Various (European Union) Year of manufacture: 2000 Tube Ø: 40 – 150 mm Wall thickness: 1 – 4 (5) mm Reference material (tensile strength): 1,000 N/mm² Tube length (infeed): 4 – 10 m Tube length (outfeed): 4 – 8 m Nedpsmqkuuefx Abrolc Bundle weight: max. 3,000 kg Bundle Ø: max. 600 mm Working direction: left → right Line configuration: • Tube bundle loading station I with separation MAIR • Tube straightening machine (10 rolls) BRONX Type 10Cr.6-BWS • Tube bundle loading station II with separation MAIR • Wet separator HANDTE • Tube bundle loading station III with separation MAIR • Tube testing line, eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • Multi-head saw line MAIR Type MC150/7/10 • Tube end finishing station MAIR • Brushing machine MAIR • Outfeed/Infeed MAIR • Tube bundle loading station MAIR • Tube bundling system MAIR/ORGAPACK • Emulsion preparation unit SCHOENAUER • Siemens S7 control system • Hydraulics

Stanje: rabljeno, Pressure: 120 t Nlodpfx Aot Hmldjbrsc Stroke: 400 mm Table surface: 1750 x 500 mm Pressing force: 120 t Working width: 1740 mm Total power requirement: 3.0 kW Machine weight approx.: 2 t Space requirement approx.: 2 x 1.0 x 1.5 m This 200 ton motorized workshop press with a movable cylinder is extremely robustly constructed and manufactured in the Netherlands. The hydraulic system operates with exceptional precision in both electric and manual modes. Equipped with: - Movable cylinder - Chrome-plated, hardened ram with detachable base - Integrated pressure gauge - Pressure regulator - Two speeds - Adjustable work table - Joystick for operating the ram - Dual-mode hand pump for high-precision pressing operations - 220V CEE socket on the rear of the hydraulic unit The heavy-duty work table can easily be adjusted in height using the hydraulic cylinder. The ram of this press descends in fast mode and, under counterpressure, the press automatically switches to a slower speed.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Slow-speed beside-the-press granulator Rotor diameter (mm): 180 Rotor width (mm): 300 Rotor speed (rpm): 150 Drive power (kW): 4 Number of rotor knives: 30 Nlodpeyzrfuefx Abrjc Number of stator knives: 2 Screen perforation (mm): >5 Weight approx. (kg): 180 The slow-speed beside-the-press granulators of the GSL 180 series feature a rotor diameter of 180 mm and working widths ranging from 120 to 430 mm. The rotor is directly driven by a gear motor. The low rotor speed ensures a pleasant noise level and optimal regrind quality. The special rotor knives can be resharpened multiple times, eliminating the need for complex adjustment work. The granulators are loaded via a noise-reducing sandwich-design feed hopper. Depending on the application, the machines can be equipped with different hopper variants. Optional low and high base frames are available. The regrind is extracted accordingly or collected in bags or a plastic container. Easy and quick maintenance is ensured via the Quick Snap quick-release system, which allows optimal accessibility.

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.300 kg, vrsta goriva: električni, – nemška proizvodnja – leto izdelave: 2010 – sekalnik opremljen z magnetom za zajem kovinskih delcev TEHNIČNI PODATKI: – dimenzija odprtine za doziranje: 600 x 800 mm – prostornina doziranja: 0,6 m³ – glavni motor: 18,5 kW – premer rotorja: fi 252 mm – število vrtljajev rotorja: 90 obr/min – število rezil: 15 kos – dimenzija rezil: 40 x 40 mm – velikost sita: fi 16 in 20 mm – avtomatski povratni tek – hidravlični predal: 160 mm – polž za odvod sekancev, dolžina: 2600 mm Nsdpfxoy S Tg Ij Abrolc – višina izhodne odprtine polža: 1450 mm – premer polža: 150 mm – moč motorja polža: 0,75 kW – teža: ~1300 kg

Stanje: novo, TIGERMETAL WH100 – Hydraulic Workshop Press 100 Ton | Electric + Hand Pump Instead of €10,489 gross RRP, now only €6,699 net (€7,972 gross incl. 19% VAT). Save 24% off the RRP! The TIGERMETAL WH100 workshop press is a high-performance, heavy-duty industrial press for demanding applications in workshops, production, and maintenance. With a pressing force of 100 tons, this machine is ideal for heavy-duty straightening, pressing, and bending operations. By combining electric drive and manual hand pump operation, this press offers maximum flexibility: fast workflows in automatic mode and precise metering for sensitive applications. Nodpfsf Sqcysx Abrelc 🔧 Technical Specifications: Model: WH100 Manufacturer: TIGERMETAL Pressing force: 100 tons Drive: electric motor + hand pump Motor power: approx. 3 kW Connection: 400V – 16A – 50 Hz Max. working pressure: approx. 320 bar Stroke: approx. 400 mm Clear width: approx. 1000 mm Max. working height: approx. 1000 mm Weight: approx. 820 kg Benefits: ✔ Combined operation (electric + manual) ✔ Extremely high pressing force for tough applications ✔ Finely adjustable pressure for precision work ✔ Laterally movable cylinder for flexible positioning ✔ Height-adjustable crossbeam ✔ Robust, long-lasting steel construction ✔ Pressure gauge for monitoring ✔ Safety valve for overload protection ✔ Optionally expandable with accessories The laterally movable cylinder and the height-adjustable working surface allow optimal adaptation to different workpieces and tasks. The heavy-duty steel frame guarantees maximum stability and long service life – even under intensive industrial use. The WH100 is the perfect choice for those who want to combine maximum pressing force with precise control and industrial reliability. Numerous other workshop presses available in various designs, sizes, and with optional accessories! Some images show a slightly different version than the one offered here. The version shown in the pictures also features an automatic function. Versions: 30t 60t 100t 150t 200t >200t: on request Special machines: on request Brand new machine! We can also build a customized press to your specifications. The press can be tested under power on site by arrangement. ----- We are happy to provide individual advice and a tailored offer. Just ask us without obligation! ----- The price quoted is net plus 19% VAT. All information subject to change and errors! Europe-wide delivery available! The European Commission provides a platform for online dispute resolution (ODR platform). This offer serves solely as an online presentation of our goods. The contractual negotiation takes place via telecommunication (email, fax, telephone, messaging portal), where we will first prepare a non-binding offer that will also include our general terms and conditions and revocation rights with imprint before any purchase/contract is concluded.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 500 mm, največja višina reza: 145 mm, največja širina rezanja: 510 mm, skupna masa: 400 kg, premer ekstrakcijske šobe: 150 mm, vrtljajska hitrost (min.): 2.800 obr/min, moč: 5,5 kW (7,48 KM), STROMAB PS 50/F Crosscut Swing Saw - Brand NEW Specification: • Condition: New • Motor power: 5.5 kW • Blade diameter: 500 mm • Motor shaft diameter: 30 mm • Motor speed: 2,800 rpm • Max. cutting width: 510 mm • Max. cutting height: 145 mm • Additional extension tables: 2 x 2 m • Weight: 400 kg • Year of manufacture: 2024/2025 • Noise emission: 85.5 dB(A) • CE compliant Nledordwm Tspfx Abrsc Additional information: • The tables shown in the pictures are included with the machine (2 x 2.0 m) • Available within 7–10 working days • Price does not include VAT or transport costs

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Lijak za surovi plastični material Letnik cca 2019 Njdpfjy Dgv Tox Abrjlc Na voljo 12 kosov

Stanje: rabljeno, Novo: Da Nljdpfxezbln Ij Abrsc Primerno za uporabo: Dvižna naprava

Stanje: rabljeno, Naprava je delujoča in pripravljena za delo Širina dovoda: 1500 mm Nlodpfx Ajy Ua Hmsbrjc Višina: 1000 - 1300 mm Dolžina: 1500 mm Izpust: 950 mm Širina traku: 250 mm Višina transportnih reber: 10 mm Globina: 900 mm Vabljeni k ogledu mojih drugih oglasov.