Industrijska Celica Za Točkovno Varjenje nakup rabljenega (84.810)

Stanje: rabljeno, Technical details: Current: 16 A Total power requirement: 9 kW Machine weight approx.: 0.032 t Voltage: 3x 400 V Frequency: 50/60 Hz Protection class: IP 23 Welding process: MIG MAG Electrode Energy control: stepless on the unit, via TEDAC torch Adjustable parameters: choke effect, wire burn-back, ignition advance 1 used MIG MAG mobile welding machine MERKLE MobiMIG 321 K Manufacturer's description: The Merkle TEDAC system offers stepless remote energy control and display directly at the welding torch. With a slider button on the top of the TEDAC torch handle, the energy supply during welding can be increased or decreased. The currently set energy is shown directly on the TEDAC torch via a clearly visible, multi-colour LED display. The MobiMIG series devices are infinitely adjustable and feature single-knob operation (synergic mode). The clear display shows current, voltage, wire feed speed, and the a-dimension. Numerous proven welding programs for various materials and wire diameters are integrated. The MobiMIG 321 K offers more capacity, allowing the use of standard D300 spools with 15 kg wire. Lhodpjym Umwsfx Al Nsf

Stanje: rabljeno, Technical Details: Number of controlled axes: 6 Workpiece weight: 20 t Operating hours: 4,290 h Controller: YASKAWA Total power requirement: 35 kVA Total weight approx.: 2,000 kg Dimensions (L x W x H) – Robotic welding cell: 2.7 x 1.1 x 2.0 m Dimensions control cabinet: L: 700 x W: 800 x H: 2,000 mm Ledpfx Alju Nwfbo Nshf Welding Robot System includes: Robot specifications: - 6 degrees of freedom - Maximum payload: 20 kg - Working envelope: rotation curve = 1,717 mm, vertical reach = 1,417 mm, horizontal reach = 2,072 mm - Axis movement ranges: S-axis rotation = +/-180°, L-axis lower arm = +155° / -110°, U-axis upper arm = +255° / -165° - Wrist joint axes: R-axis roll = +/-200°, B-axis pitch/yaw = +230° / -50°, T-axis rotation = +/-360° - Axis speeds: S and L axes = 170°/s; U-axis = 175°/s; R and B axes = 355°/s; T-axis = 525°/s - Permissible torque: R and B axes = 39.2 Nm; T axis = 19.6 Nm Welding unit specifications: - Make: Fronius, TIG welding (AC/DC), current range 3 A / 10.1 V - 300 A / 22.0 V, water-cooled, protection class IP23 Positioner/table unit specifications: - Table surface Ø 600 mm, 360° rotation, swivels 90° left/right Wire feed specifications: - Fronius, type KD 7000, feed rate 0.2 - 22 m/min, protection class IP23, input voltage U1 230 V Hand-held control unit Control cabinet i.d. *

Stanje: rabljeno, Leto izdelave: 2002, Technical Details: x-axis travel: 1500 mm z-axis travel: 1300 mm Control system: YASNAC XRC Control Total power requirement: 3.3 kVA Total weight approx.: 3,200 kg The welding robot system consists of: - Welding rectifier MESSER, type Phoenix 500TG; MIG-MAG / TIG and MMA welding up to 500A; air-cooled; protection class IP 23 Lhedpeu R Dfkofx Al Nsf - Wire feeder EWM, type Phoenix Drive 4 ROB WE, wire diameter Ø 1.0 - 1.2 mm, feed speed 0.5 - 24 m/min, protection class IP 23 - MIG/MAG shielding gas welding torch BINZEL for wire Ø 0.8 - 1.6 mm - Robot ERCS UP6-RE00 with YASNAC XRC Control, axis travel Y-axis=1,500 mm and Z-axis=1,300 mm, arc movement swivel=approx. 90° right/left, swivel radius=1,000 mm, rotation 360°, welding torch rotation 360°, outreach max/min: 1,500 / 500mm - 1x control cabinet L:900 x W:900 x H:2,500 mm - 1x control panel ERCS-UP6-RE00, control 4.0 XRC, L:610 x W:800 x H:900 mm - 1x welding table L:4,400 x W:550 x H:1,100 mm, with compressed air connection 10 bar, working area LxW 1,200 x 340 mm, x-axis travel 3,250 mm Additionally included: 1x straightening station DETEC (with work table and straightening unit) 1x butt welding station with feed table as seen.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1975, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, Oprema: Na voljo je tipska ploščica, Proizvajalec: PECO N30 Nazivna moč: 40/80 kVA Leto proizvodnje: 1970, možno dvosmerno varjenje, hlajenje z vodo, pogon na zrak 32 A Dolžina varjenja: 500 mm Napetost: 380 V, 50 Hz Lhodpfxexlr Tdj Al Nef

Stanje: rabljeno, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH, Type ISQ20 Compact ISQ-AC/DC-AWS-EXT-250A 22kVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Compact ISQ-AC/DC-AWS-EXT-250A 22kVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S, 25 mm stroke with Heidenhain measuring system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50/60 Hz Connected load: 22 kVA Welding current types: AC / DC Output power: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (stand-alone, detachable control device) Lsdpspy Uzyjfx Al Njhf Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Fault control and process monitoring - Monitoring of current, voltage, power, and energy - Test impulse for part recognition - Program memory for 99 programs Inverter dimensions W x H x D: 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated capacity: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force initiation from 1.2 to 550 N - Heidenhain displacement measuring system Welding unit with 5 pneumatic cylinders and Festo valve manifold Type CPX Welding head mounted on horizontal guide rail and can be shifted 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 with 46 mm stroke, 1 with 20 mm stroke). Projection distance of welding tip: 300 mm Welding tip height above floor: 315 mm Welding unit dimensions W x H x D: 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 almost identical units available, price per complete unit

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, leto zadnje generalne obnove: 2024, Štirikotna varilna in CNC čistilna linija za kote STURTZ SE - HSM 30/26 Compact. Celotna linija deluje pravilno in dobro. Oprema je delovala do zadnjega trenutka pred demontažo. Lodpsv Uzr Eofx Al Nohf

Stanje: dober (rabljeno), Welding fume filter, welding fume extraction, exhaust gas filtration system, exhaust gas filter system, exhaust gas filter, industrial exhaust gas filter, air exhaust purification system, filter cleaning system, filtration unit, filter block Lhedpfopm Th Eox Al Nef - Manufacturer: Fischer Umwelttechnik, filter block air exhaust purification system type 4600 - Rated power: 2.2 kW - Individual components: see photos - Dimensions: 910/750/H2250 mm - Total weight: 226 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Stanley Tucker Stud Welding & Fastening System TE1500 + TF21D + LM310 – Stud Welding & Joining System Manufacturer: Stanley Engineered Fastening / Tucker / Emhart System consists of: Control Unit / Power Supply: TE1500 (Part No. T028 618/400) Feeding Unit / Feeder: TF21D (Part No. T059 060) Stud Setting Tool: LM310 (Part No. T133 016) Made in Germany Description: This professional Tucker stud welding system is a complete industrial joining package for fully automatic setting of: - Weld studs - Press-fit studs - Fastening elements for bodywork - Structural and sheet metal connections Tucker / Stanley systems are used worldwide in automotive manufacturing due to their: - Extreme reliability - High precision - Long service life - Perfect integration capabilities in robotic cells. The system consists of: Lhedpfx Ajx Tfypjl Nef 1️⃣ TE1500 Control Unit / Power Supply - Powers the setting device - Controls process parameters - Input: 400 V, 50/60 Hz - Type: TE1500/3.032.55.03.0405.X - Serial No.: 14/4409830349001 2️⃣ TF21D Feeding Unit - Automatic supply & conveying of studs - Supply voltage: 24 V - Type: TF21D.00.00/5.16F8 - Serial No.: 14/4328730020002 3️⃣ LM310 Stud Setting Tool - Pneumatic / servo-assisted setting gun - Type: LM310/K.00.00 - For final placement / pressing / setting of studs - Network: “Stud 5.14” (system-specific input value) - Serial No.: 13/3850680080004 Technical Data (from type plates): Control Unit TE1500 - Supply voltage: 400 V - Frequency: 50/60 Hz - Type: TE1500/3.032.55.03.0405.X Feeding Unit TF21D - Supply: 24 V - Type: TF21D.00.00/5.16F8 - Automatic feeder for studs / fastening elements Setting Tool LM310 - Type: LM310/K.00.00 - High-precision setting module for body shop applications Typical Applications: - Automotive industry / OEM production - Robotic cells (KUKA, ABB, FANUC, retrofit systems) - Structural sheet metal assembly - Joining technology for body parts - High-volume serial production

Stanje: novo, nosilnost: 2.000 kg, premer vrtljive mize: 1.300 mm, vrtilni razpon: 120 °, Capacity: 2,000 kg Lodpfeuf Nm Hsx Al Nshf Maximum height at center of gravity: 250 mm Maximum eccentricity at center of gravity: 200 mm Table diameter: 1,300 mm Motor power: 1.1 + 1.5 kW Table tilting (Motorized): Tilting speed 0.67 rpm Rotation speed: 0.12 – 1.2 rpm Manual operation: Via foot pedal (Right and left rotation) Automatic operation: Via selector on control panel Tilt angle (degrees): 0–120 Variable frequency drive: Danfoss Electrical components: Schneider

Stanje: novo, nosilnost: 5.000 kg, premer vrtljive mize: 1.500 mm, vrtilni razpon: 120 °, Capacity: 5,000 kg Max. height at center of gravity: 300 mm Max. eccentricity at center of gravity: 200 mm Table diameter: 1,500 mm Motor power: 2.2 + 3 kW Table tilt (motorized): Tilting speed 0.14 rpm Rotation speed: 0.05 – 0.5 rpm Manual control: Via foot pedal (Right and Left rotation) Lhedpfx Ajuf Nu Rol Nof Automatic control: Via selector on control panel Tilt angle (degrees): 0-120 Frequency inverter: Danfoss Electrical components: Schneider

Stanje: novo, nosilnost: 300 kg, premer vrtljive mize: 600 mm, Capacity: 300 kg Max. height (center of gravity): 200 mm Ljdpfxjuf Nk Ee Al Nehf Max. eccentricity (center of gravity): 150 mm Table diameter: 600 mm Motor power: 0.37 kW Table tilt: Manual, via handwheel Rotational speed: 0.1 – 1.0 rpm Manual operation: Via pedal (Right and left rotation) Automatic operation: Via selector on control panel Tilt angle (degrees): 0–90 Frequency inverter: Danfoss Electrical components: Schneider

Stanje: novo, nosilnost: 100 kg, premer vrtljive mize: 400 mm, Capacity: 100 kg Max. height, center of gravity: 150 mm Max. eccentricity, center of gravity: 100 mm Table diameter: 400 mm Motor power: 0.2 kW Table tilt: Manual, via handwheel Rotation speed: 0.4 – 4.0 rpm Lodpfx Asuf Niusl Njhf Manual control: Via foot pedal (Right and Left rotation) Automatic control: Via selector on control panel Tilt angle (degrees): 0–90 Frequency drive: Danfoss Electrical components: Schneider

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 82415, vrsta vhodnega toka: trifazni, skupna širina: 1.500 mm, skupna dolžina: 2.500 mm, vhodna napetost: 400 V, vhodni tok: 16 A, največja višina reza: 100 mm, 22 C – Finn-Convey Industrial Fabric Spreading and Cutting Line (14.65 m x 1.8 m) – Complete with Air-Floatation Table Description Available for sale is a professional Finn-Convey fabric spreading and cutting table line in an industrial configuration, offered as a fully operational system. This system is designed for efficient fabric spreading and preparation in the cutting room. It enables controlled handling of heavy fabric rolls, precise layer formation, and a smooth material flow prior to cutting. The unit was operated as an independent production line together with a Bergman cross-cut saw (unit 114 A). This combination allows for efficient pre-cutting of fabric rolls to the desired length before spreading, thereby optimizing workflow and reducing manual labor. The system was used in professional garment manufacturing and was fully operational until the plant closure. Key Technical Data • Total length: 14.65 meters (modular construction, adaptable) • Table width: 1.80 meters (suitable for wide fabrics) • Technology: Air-floatation table for low-friction material transport • Drive: Motorized side drives for tension control during spreading System Components • Finn-Convey motorized side drives • Industrial air-floatation table with perforated surface • Integrated blower system (centrifugal fans under the tables) • Electric control cabinet for system operation • Fabric roll holders and support fixtures • Integrated end cutting unit with rotary knife Technical Details of the Cutting Unit • Speed-controlled AC motor (Taili Motor Co., Ltd., approx. 90–200 W) • Gearbox assembly (e.g., 5GN series) for high torque • Rotary knife with integrated sharpening device • Height-adjustable guide rails to accommodate different material thicknesses • Designed for multi-layer cutting Additional Drive Components • Auxiliary motor (e.g., 40 W class, speed controlled) for fine movements • Gear-based power transmission for stable continuous operation • External capacitor for single-phase operation (typical for auxiliary drives) System Architecture • Modular table design for flexible production layout adaptation • Air-assisted material movement to reduce friction • Tension-free fabric feed by appropriate roll systems • Mechanical or encoder-based length measurement, depending on configuration • Compatible with upstream cutting systems and manual processes Production Benefits • High efficiency due to long spreading lengths and reduced material waste • Ergonomic operation – heavy fabric layers can be moved easily • Precise layer alignment through controlled drive units • Integrated cutting function improves workflow • Suitable for denim, upholstery, and technical textiles Condition Used industrial condition Taken directly from ongoing production Typical signs of use present Inspection possible prior to dismantling Sold as seen (‘as-is, where-is’), without warranty Lhsdpfjy Au Hqsx Al Nof Location Valga, Estonia Dismantling and Transport To be organized by the buyer

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Custom made, vrsta vhodnega toka: trifazni, skupna širina: 1.800 mm, skupna dolžina: 14.650 mm, vhodna napetost: 400 V, vhodni tok: 16 A, največja širina rezanja: 1.800 mm, 22 C – Finn-Convey Industrial Fabric Spreading and Cutting Line (14.65 m x 1.8 m) – Complete with Air-Floatation Table Description Available for sale is a professional Finn-Convey fabric spreading and cutting table line in an industrial configuration, offered as a fully operational system. This system is designed for efficient fabric spreading and preparation in the cutting room. It enables controlled handling of heavy fabric rolls, precise layer formation, and a smooth material flow prior to cutting. Lhsdsy Au Aljpfx Al Nef The unit was operated as an independent production line together with a Bergman cross-cut saw (unit 114 A). This combination allows for efficient pre-cutting of fabric rolls to the desired length before spreading, thereby optimizing workflow and reducing manual labor. The system was used in professional garment manufacturing and was fully operational until the plant closure. Key Technical Data • Total length: 14.65 meters (modular construction, adaptable) • Table width: 1.80 meters (suitable for wide fabrics) • Technology: Air-floatation table for low-friction material transport • Drive: Motorized side drives for tension control during spreading System Components • Finn-Convey motorized side drives • Industrial air-floatation table with perforated surface • Integrated blower system (centrifugal fans under the tables) • Electric control cabinet for system operation • Fabric roll holders and support fixtures • Integrated end cutting unit with rotary knife Technical Details of the Cutting Unit • Speed-controlled AC motor (Taili Motor Co., Ltd., approx. 90–200 W) • Gearbox assembly (e.g., 5GN series) for high torque • Rotary knife with integrated sharpening device • Height-adjustable guide rails to accommodate different material thicknesses • Designed for multi-layer cutting Additional Drive Components • Auxiliary motor (e.g., 40 W class, speed controlled) for fine movements • Gear-based power transmission for stable continuous operation • External capacitor for single-phase operation (typical for auxiliary drives) System Architecture • Modular table design for flexible production layout adaptation • Air-assisted material movement to reduce friction • Tension-free fabric feed by appropriate roll systems • Mechanical or encoder-based length measurement, depending on configuration • Compatible with upstream cutting systems and manual processes Production Benefits • High efficiency due to long spreading lengths and reduced material waste • Ergonomic operation – heavy fabric layers can be moved easily • Precise layer alignment through controlled drive units • Integrated cutting function improves workflow • Suitable for denim, upholstery, and technical textiles Condition Used industrial condition Taken directly from ongoing production Typical signs of use present Inspection possible prior to dismantling Sold as seen (‘as-is, where-is’), without warranty Location Valga, Estonia Dismantling and Transport To be organized by the buyer

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, Year of manufacture: 2014 Lhsdpfx Aler Aka Ao Nef Load capacity: 20 kg Reach: 1,726 mm

Stanje: novo, Leto izdelave: 2023, doseg roke: 1.400 mm, nosilnost: 6 kg, New welding robot TIG OKIO AB6-C1400 -Country of origin: China -Model: AB6-C1400 -Number of axes: 6 -Reach: 1400 mm -Maximum payload: 6 kg -Control cabinet -Remote control Lhedpfxoqnt N Do Al Nof -Wire feeder -Welding power source: TIG WSM400R -Cooler

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), Robot cell for leak testing consisting of: Lhodpfx Ajn D D E Tol Njf FANUC LR Mate 200iC/5L robot – year 2008, measurement table equipped with 8 light curtains, 2 Innomatec devices for leak testing, type LTC-502. The cell is equipped with a safety system and CE certification.

Stanje: rabljeno, Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 246393272, vhodna napetost: 230 V, pnevmatska povezava: 10 letvica, Opis: Naprodaj je Dürkopp Adler 745-35 F Premium programska industrijska enota za šivanje žepov (pocket welting), ponujena kot popolnoma avtomatizirana delovna postaja. Sistem je zasnovan za visokoprecizne, ponovljive šivalne operacije, kot so vstavljanje žepov in obdelava različnih komponent oblačil. Vključuje napreden programabilni krmilni sistem, avtomatizirano vpenjanje in pozicioniranje ter integrirano rokovanje z materialom. Stroj omogoča dosledno kakovost izdelave ter učinkovit potek dela v zahtevnih industrijskih okoljih. Enota je bila uporabljena v profesionalni tovarni oblačil in je delovala do zaprtja obrata. Stroj je bil redno servisiran in vzdrževan, zadnji servis opravljen 27.2.2026. Prvotna nabavna vrednost približno 38.000 €. Vključuje: • Dürkopp Adler 745-35 Premium šivalna enota • Integrirana elektronska nadzorna plošča • Avtomatiziran sistem vpenjanja in pozicioniranja • Transportni trak / transportna enota • Pnevmatski sistem in komponente za regulacijo zraka • Popolna industrijska delovna miza in ogrodje • Nožno upravljanje • Materialni nosilci in vodila Tehnični podatki: • Proizvajalec: Dürkopp Adler AG • Model: 745-35 F • Tip: Programabilna avtomatizirana šivalna enota • Napetost: 1 x 190–230 V • Frekvenca: 50/60 Hz • Zahtevan pnevmatski priklop Stanje: Rabljeno industrijsko stanje. Delujoče pred zaprtjem obrata. Redno servisirano in vzdrževano, zadnji servis 27.2.2026. Ogled možen pred demontažo. Lhedpfxjy Agrlo Al Njf Tipične uporabe: • Avtomatsko všivanje žepov (kavbojke, hlače) • Ojačitvene operacije • Ponovljive natančne šivalne naloge • Industrijska proizvodnja oblačil Prodajni pogoji: Oprema se prodaja zaradi zaprtja obrata in je na voljo neposredno iz proizvodnje. Prodano v stanju "videno-kupljeno", brez garancije. Kupec je odgovoren za preverjanje ustreznosti za lastne materiale in proizvodne procese. Reklamacije po prodaji niso možne. Demontaža in transport: Kupec prevzame odgovornost za demontažo in transport. Pomoč pri nakladanju je možna, vendar na lastno odgovornost in stroške kupca. Video iz delovnega procesa je bil posnet 5.3.2026. Povprašajte za video.

Leto izdelave: 2021, stanje: rabljeno, NOVA CENA: približno 110.000 € KR Quantec 6-osni robot vključno z KRC4 krmilnikom in upravljalno ploščo robota 12m pametna tablica, 3100mm doseg, 20 kg nosilnosti ezunanja osni modul za povezano rotacijsko os, matematično povezana Kuka ArcTech paket Basic + nivo 2 advanced TouchSense tehnologija za zmanjšanje toleranc delov Kuka Wiresense modul Lhodpfx Alowgn Dwe Nsf pri zibajočem gibanju se napetost meri iz napajanja in se tako pri deformaciji dela varilna sled premakne. * Funkcija deluje samo pri kotnih zvarih vključuje varilni aparat Lorch S5 SpeedPulse XT vključuje samodejno postajo za čiščenje gorilnika *Rezalna enota *Rezkar *Sprej za ločevanje pri varjenju

Leto izdelave: 2002, stanje: nepreverjeno (rabljeno), Robot + control cabinet + no operator panel + connection cables Lodegu U Nqopfx Al Nehf Used, untested robot with controller and cables. No teach pendant. Not tested.

Leto izdelave: 2005, stanje: nepreverjeno (rabljeno), Weight: approx. 1700 kg Lhodpegu U Iljfx Al Njf Robot + control cabinet + no operator panel + connection cables Used, untested robot with control unit and cables. No teach pendant included. Not tested.

Stanje: novo, Further technical data available on request 3D welding table systems Lodpfed Aca Dox Al Nehf Worktop design: top plate For more information, see catalogue/price list

Stanje: novo, Leto izdelave: 2025, IMPACT 4in1 iz zaloge Evropa IMPACT FL 1500 je najsodobnejši laserski stroj za varjenje, čiščenje in rezanje v enem. Posebna programska oprema in nastavitve parametrov na tej laserski napravi omogočajo uporabo tako za čiščenje, rezanje kot tudi varjenje. Večina uporabnikov uporablja varilni aparat največ 20 % časa, enako velja za čiščenje in fino rezanje. Varilni aparat z dodatnimi funkcijami čiščenja in rezanja z močjo 1,5 kW običajno stane najmanj 25.000 do 30.000 evrov. Z našim strojem ponujamo isto rešitev za polovico investicijskih stroškov, poleg tega omogoča tudi rezanje in čiščenje jekla ter drugih materialov. Ledpsu Nf Nzjfx Al Nehf Če vas zanima, vam lahko pripravimo celovito ponudbo. Dobavljamo 3-v-1 stroje z močjo 1,5, 2 in 3 kW. Vključeno je podajalnik žice, pri modelu 3 kW sta vključena dva podajalnika žice za hitro preklapljanje varilca. Modela 1,5 in 2 kW potrebujeta enofazni priključek 220 V. Model 3 kW deluje na trofazni napetosti 3 x 380 V. Dobavljamo po vsej Evropi, v Evropi imamo na treh lokacijah prodajno in servisno organizacijo.

Stanje: dober (rabljeno), Dobro delujoče stanje. Prosimo, oglejte si tudi naše druge oglase. Lhodpfsn Uv Ulsx Al Nof

Leto izdelave: 1988, stanje: rabljeno, Bihler B-4/2 Sistem za varilno krmiljenje. Lsdpfx Alshitxdj Nshf Priključek: 400 V, 50 Hz. Opremljen z varilnim modulom ET50.6. Letnik proizvodnje: 1988/04. Izdelano v Nemčiji. Na zalogi več strojev znamk Bihler in Bruderer.