Homag Obdelava Oblike In Maska Za Lepljenje Robov nakup rabljenega (131.714)

Stanje: rabljeno, vrsta vhodnega toka: Klimatska naprava, skupna dolžina: 480 mm, skupna širina: 250 mm, skupna višina: 320 mm, delovna višina: 320 mm, vhodna napetost: 230 V, dolžina mize: 300 mm, širina mize: 250 mm, vhodna frekvenca: 50 Hz, moč: 0,735 kW (1,00 KM), vrsta nastavitve višine: mehanski, Stroj za odstranjevanje srobov za konture, stroj za posnemanje robov s frezo Proizvajalec: Matchling Tip: MCL-300R Malo rabljen Priključek: 230 V Motor: 0,735 kW Obratov: 1000 do 6000 min⁻¹ Posnetje robov: 0–3 mm, brezstopenjsko nastavljivo Vpenjalna izvrtina za rezkar: Ø 10 mm Dimenzije: Dolžina: 480 mm Širina: 250 mm Višina: 320 mm Teža: 32 kg Vključena oprema: 4 kos rezkarjev za posnemanje 45° VHM 1 kos četrtkrožni rezkar R1 VHM 2 kos krogličnih ležajev z osjo 1 kos vodilna letev 1 kos fiksni vodilni zatič z nosilcem 2 kos adapterjev (reduktorskih puš) za Ø 6 mm in Ø 8 mm Ppsdjy Szgvepfx Aa Det

Leto izdelave: 2018, stanje: rabljeno, Year of manufacture refers to the final acceptance of the system; individual components may vary in age. Workpiece dimensions up to max. LxWxH: 8,000 x 2,000 x 2,000 mm. Maximum crossbar load: 2,000 kg/trolley. Material: Steel. Ppjdpfx Asy T Nzdea Dst Pos. 1: Washing cabin, Jumbo-Clean, with stainless steel interior for degreasing/phosphating of steel by automatic system or manual lance; Pos. 2: 1 set of band filters; Pos. 3: 1 automatic spray ring for the Jumbo-Clean washing cabin including central lance; Pos. 4: 1 fresh water treatment system; Pos. 5: 1 manual push track with 1 electric transverse transfer platform; Pos. 6: 1 lifting/lowering station Jumbo-Lift 2000 integrated into the transverse transfer platform; Pos. 7: 1 adhesion water/powder dryer/wet paint dryer, indirectly gas-heated, door opening WxH: 2,800 x 3,100 mm, clear length: 9,500 mm, overall WxHxL approx.: 4,000/5,000/10,000 mm; Pos. 8: 1 face-side powder extraction system for on-site paint booth for spraying and drying operation; Pos. 9: 1 manual coating device OptiFlex(R)2; Pos. 10: 1 supporting structure for on-site steel structure; Pos. 11: Control cabinet.

Stanje: rabljeno, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Naprodaj: Premium Holz-Her 1329 Multi robni lepilni stroj + Return-Master 5920 Prodajamo vrhunski robni lepilni stroj Holz-Her 1329 Multi, vključno z vračalnim sistemom Return-Master 5920. Enota je stara 4 leta in je v odličnem stanju. Prvotna cena novega: 138.000 € + DDV Naša cena: 64.000€ + DDV (prihranek 50 %) Zakaj izbrati ta stroj? Pridobite vrhunsko, malo rabljeno napravo po isti ceni kot je subvencionirana enota, vendar brez papirologije, birokracije ali dolgoročnih obveznosti iz razpisov. Pjdpfx Aeygrghoa Dopt Vzdrževanje: Redno servisirano s strani strokovne tehnične ekipe Dimpex. Zmogljivost: Visokospecifikacijska različica »Multi« za raznovrstne proizvodne potrebe. Prosimo, samo resni kupci.

Stanje: dober (rabljeno), Leto izdelave: 2020, - Rabljeni stroj - Leto izdelave: 2020 - Debelina robnega traku (rola) 0,4 - 6 mm - Debelina robnega traku (trak) 0,4 - 6 mm - Največja višina roba: 60 mm - Minimalna dolžina obdelovanca: 160 mm - Minimalna širina obdelovanca: 60 mm - Podajalna hitrost: 10 m/min - Lepljenje robov FG201 z 2 diamantnima rezkarjema - Podajalnik robnih trakov 1903 - Sistem nanosa lepila Glue-Jet GJ301 - Tiskalna enota 1912-3 pnevmatska - Odkapna enota 1918 pnevmatska - Rezkalna enota FR 201 z 2 diamantnima rezkarjema - Kotni kopirni agregat 1832 z diamantnim rezkarjem - Enota s strgalom 1929 - Površinsko strgalo 1964 Ppedsy U E Tlepfx Aa Dot - Polirni agregat 1940 - Razpršilna enota 1856 vhodno-izhodno območje - Ex works, prosto naloženo

Stanje: rabljeno, Izrast stojala: 420 mmStalen podajalni pomik: ca. 6 m/minPogonski električni motor: 25 W, 190 V=Priključna napetost: 110 - 235 V, 50 - 60 HzSkupna priključna moč: 110 WKr Milina glava: ca. 75 WNeto teža: ca. 22 kg s nožnim pedalomSkladiščna lokacija: Nattheim Psdpfox Upgcjx Aa Dept

Stanje: rabljeno, Leto izdelave: 1995, Konstantni stroj - kombinirana postaja, krtača za prah - naprava za merjenje debeline - elektronska posamezna brusna čevelj MCS sistem Weber 32 mm - utorni jekleni kalibrirni valj - izpihovanje traku - vakuumska preproga. Širina brušenja: 1100 mm. Pogon: 15 kW. Podajanje ca. 1,1 kW. Nastavitev višine 0,25 kW. Dimenzije brusilnega traku: 1150 x 2500 mm. Maksimalna debelina obdelovanca: 150 mm. Širina stroja: 1700 mm. Dolžina stroja: 2000 mm. Višina stroja: 2160 + 150 mm. Teža stroja: 1900 kg. Konstantna delovna višina: 850 mm. Priklop za odsesavanje: trak 180 mm / krtača 120 mm. Količina sesalnega zraka: 0,74 m³/s. Priključna moč: 23 kW. Priključek za stisnjen zrak: 7 bar. Hitrost podajanja: 3–15 m/min. Delovnih ur: 7000 h. Lokacija skladišča: Nattheim Ppedpfxjx Twcpe Aa Det

Stanje: rabljeno, Leto izdelave: 2001, Debelina obdelovanca min./maks.: 6/45 mm Debelina nalimka: 0,4 - 3 mm Največja višina nalimka: 51 mm Najmanjša dolžina trakovega nalimka: 350 mm Največji previs nalimka v višino na stran: 3 mm Najmanjša širina obdelovanca: 60 mm Najmanjša dolžina obdelovanca: 180 mm Skupna dolžina: 3700 mm Širina: 1440 mm Največja višina: 1970 mm Višina vstopa obdelovanca: 850 mm Teža: ca. 850 kg Psdpfx Aasy Dd Iyj Dspt Skladiščno mesto: pri dobavitelju

Stanje: rabljeno, Leto izdelave: 1991, Technical Details: Workpiece diameter - max.: 8 - 50 mm Workpiece length: 5 - 500 mm Spindle speed: 100 - 1000 rpm Workpiece diameter - max.: Ø 50 mm (solid material) Workpiece diameter - min.: Ø 8 mm (solid material) Podpfx Aaeu Iww Uj Dept Workpiece diameter - max.: Ø 70 mm (tubing) Workpiece diameter - min.: Ø 8 mm (tubing) Wall thickness: 1 - 10 mm Centre height: 300 mm Spindle bore: Ø 90 mm Cut-off length with swing stop min./max.: 5 - 500 mm Total power requirement: approx. 25 kW Machine weight approx.: on request t Machine dimensions (LxWxH): approx. 5.8 x 1.5 x 1.7 m Control cabinet dimensions: 1300 x 450 x 1950 mm Dimensions (L x W x H): control panel: 0.36 x 0.30 x 0.68 m Dimensions (L x W x H): material feed: 5.5 x 0.95 x 1.15 m Cut-off turning and end-finishing machine including bar feeder (Manufacturing processes: cutting to length and deburring, parting-off, facing, grooving, centering, and more possible) Working principle: stationary material – rotating tools Further features: - Steplessly adjustable parting/cut-off head speed: 100 - 1000 rpm - End-machining: 4 tool sets with speed from 52 - 1320 rpm - Feed for cut-off head/tool: stepless, 0 - 0.3 mm/rev, with rapid and working feed, hydraulic - Feed for deburring device: stepless up to 0 - 175 mm/sec. - Material feed speed: 170 mm/sec. - Piece counter - Bar feeder Operation via operator panel/control panel i.D.

Stanje: rabljeno, Leto izdelave: 1999, Technical details: Swing diameter over bed: 340 mm Swing diameter over support: 190 mm Turning length: 700 mm Distance between centers: 700 mm Spindle speeds: 55 - 2350 rpm / 8-step mechanical Spindle bore: 50 mm Tailstock quill travel: 120 mm Tailstock quill: MT3 Spindle torque: 350 Nm Maximum workpiece weight – between centers: 50 kg Total connected load: 3.0 kVA Machine weight approx.: 0.79 t Machine dimensions approx. LxWxH: 1.6 x 0.9 x 1.4 m 3-jaw chuck Forkardt Ø 200 (external clamping) Longitudinal slide X-axis travel: 600 mm; longitudinal feed 0.045 - 0.787 mm in 20 steps; metric thread Cross slide Y-axis travel: 220 mm; feed 0.023 - 0.406 mm in 20 steps Top slide swivels 60° right and 120° left Thread cutting Machine lighting Ppedpfx Asu Ixw Aea Djt No coolant system (pre-installed) Accessories: 3 sets of turning jaws 3x Multifix toolholders 2x drill chucks 1x live center 3 machine feet

Stanje: rabljeno, Leto izdelave: 1971, Technical Details: Max. face turning diameter: approx. Ø 900 mm Spindle speed: 12.5 - 2000 / 24 steps rpm Faceplate speed: 8 - 190 / 12 steps rpm Feed rates (faceplate): 0.03 - 3 mm/step Rapid traverse (all axes): 2000 / 4000 mm/min Tool holder (work spindle): ISO 50 / SK50 Clamping area (table): 700 x 800 mm Table rotation: 360° Cross traverse of drilling table: 800 mm Max. table load: 1500 kg Total power requirement: approx. 11.0 kW Machine weight: approx. 7800 kg Dimensions (L x W x H): approx. 3.0 x 2.0 x 2.6 m Control cabinet dimensions: 1800 x 400 x 1950 mm Faceplate Ø: 420 mm Faceplate slide travel: 180 mm Max. face turning diameter: approx. 900 mm Ppedpfx Aasu Idtps Dot Longitudinal travel of column: 700 mm Vertical travel of spindle headstock: 700 mm Feed drive of column, spindle headstock and clamping table: - In spindle operation: 0.20 - 10 mm/rev, 34 steps - In faceplate operation: 0.16 - 16 mm/rev, with steps Equipment: Optical precision measuring system/Heidenhain linear scale for X/Y/Z/C-table axes Hydraulics Machine feet/base plates Operator panel with pendant arm

Stanje: rabljeno, Leto izdelave: 1976, Technical Details: Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Turning length: 800 mm Ppedpeva Ertofx Aa Dst Turning length: facing = 140 mm / cross = 120 mm Centre height over bed: 170 mm Spindle bore: Ø 40 mm Spindle speed range: 25 - 2000 RPM / 20 steps Feeds: longitudinal: 0.028 - 1.0 mm/rev / cross: 0.012 - 0.44 mm/rev Tailstock quill taper: MT3 Tailstock quill travel: 120 mm Total power requirement: 3.0 kW Machine weight approx.: 1.1 t Machine dimensions approx. LxWxH: 2.0 x 0.8 x 1.4 m Thread cutting possible: Metric, Whitworth, and module threads Equipment: - 2-way measuring system VISUCONT - 3-jaw chuck Ø 205 mm with internal clamping jaws - Multifix quick-change tool post - Foot brake - Coolant pump (delivery line exclusive)

Stanje: rabljeno, Tehnične podrobnosti: Pedpswa I Shjfx Aa Djpt Premer struženja nad posteljo: 560 mm Premer struženja nad suportom: 280 mm Dolžina struženja: 2000 mm Višina konic: 280 mm Razdalja med konicami: 1600 mm Izvrtina glavnega vretena: 65 mm Območje vrtljajev: 9...1800 / 24 stopenj min⁻¹ Vzdolžni pomik: 0,025-0,09 mm/obrat Prečni pomik: 0,012-0,045 mm/obrat Pomik pinole konjička: 225 mm Priključek konjička: MK5 Skupna priključna moč: 18 kW Teža stroja pribl.: 3,8 t Mere stroja (DxŠxV): 3,7 x 1,6 x 2,05 m Trivpenjalni vpenjalni tulec D=320 mm Zgornji suport vrtljiv ±45°

Stanje: rabljeno, Tehnične podrobnosti: Ppjdpfxsu Ngfqe Aa Dst Debelina pločevine: 10 mm Debelina materiala: 4,5 - 10 mm Moč: 2000 Watt Obratovalna napetost: 220 V s 4-metrskim kablom Približna teža stroja: 18 kg Dimenzije stroja: D: 550 x Š: 120 x V: 260 mm OBLIKOVALEC VARILNIH ROBOV – POSNEMALNI STROJ ali ŠKARJE ZA PLOŠČE v kovčku Ročna naprava Uporaba: rezanje in zareza ploščatih obdelovancev Debelina materiala je odvisna od vrste materiala (max. 10 mm) Orodje = spodnji nož (matrica) in zgornji nož (štancek) posamezno z dodatno opremo kot na sliki, za 200,00 evrov

Stanje: rabljeno, Leto izdelave: 1952, Technical Details: Swing diameter over bed: 1000 mm Swing diameter over slide: 520 mm Turning length: 2500 mm Slide travel Z-axis, saddle: approx. 500 mm Slide travel Z-axis, top slide: approx. 300 mm Center height: 300 mm Spindle bore: 90 mm Speed range: 3.2 - 382 / 22 steps rpm Feed range X-direction, longitudinal: 0.213 - 2.67 / 36 steps m/min Feed range Y-direction, cross: 0.070 - 1.11 / 36 steps m/min Tailstock quill taper: MK 6 Total power requirement: 22 kW Machine weight approx.: 8.2 t Machine dimensions approx. LxWxH: 5.3 x 1.6 x 1.6 m Transport dimensions approx.: 5.5 x 1.7 x 1.6 m Equipment: Face plate Ø 1000 mm 4-position tool post Steady rest Ø 250 mm, closed Ppjdju Tq U Iepfx Aa Djt Accessories: Four-jaw chuck Ø 630 mm

Stanje: rabljeno, Leto izdelave: 1987, Technical specifications: Swing diameter over bed: 500 mm Swing diameter over cross slide: 280 mm Turning length: 1500 mm Distance between centers: 1500 mm Swing diameter in gap: 730 mm Spindle bore: 65 mm Spindle speed range: 25–1250 / 32–1600 / 36–1800 rpm, 18 steps Feed rate: 0.05 – 8.5 mm/rev Rapid traverse x-axis: 4 m/min Rapid traverse y-axis: 1.26 m/min Tailstock quill taper: MT 5 Tailstock quill stroke: 200 mm Total connected load: approx. 8.2 kW Machine weight approx.: 2.5 t Machine dimensions (L x W x H): approx. 3.2 x 1.3 x 1.5 m Thread cutting possible Cross slide travel 300 mm, feed 0.015 – 2.8 mm (end position clutch not functional, manual shut-off required) Top slide with 4-way toolpost Ppodpfeu Ixznox Aa Dot Steel faceplate Ø 705 mm with offset threaded holes

Stanje: rabljeno, Technical details: Vertical rapid feed: Z-axis: 1,125 mm Horizontal travel: X-axis: 600 (+1,000 electrically/manual) mm Cross feed: Milling slide Y-axis: 325 (340) mm Control system: Siemens 840D Clamping surface diameter: 3,500/5,800 mm Turning diameter: max. 6,000 mm Rotational speed range, faceplate: 1–12 rpm Spindle speed (milling spindle): 1,000–6,000 rpm Max. workpiece diameter on pallets: 6,000 mm Workpiece weight: 10–2,000 kN Tool holder: HSK-A-100 Total power requirement: 120 kVA Machine weight approx.: 35 t VERTICAL RING AND CYLINDER MACHINING CENTER Ppodou Idlfepfx Aa Det SPECIAL CNC MACHINING MACHINE Application: FOR TURNING, BORING, MILLING, AND GRINDING RING-SHAPED PARTS (large slewing bearings, slewing rings, gear rims, special flanges, and much more.) Machine structure: Two separate main units: Column unit and faceplate/table unit - Feed drives via AC servomotors - Cross movement of milling support Z-axis 325 (max. 340) mm - Faceplate drive power: 76 kW - Table positioning accuracy = 0.02 mm Renewed/Upgraded: - Axis motors replaced (Siemens) - Central lubrication for large slewing bearing of rotary table/spindle expanded - Partial machine rewiring - Accumulator and safety valve in progress.

Stanje: rabljeno, Technical details: Swing over bed: 320 mm Turning length: 800 mm Distance between centers: 800 mm Center height: 150 mm Spindle bore: 30 mm Speed range: 35 - 1500 rpm / 16 steps Feed range X-axis: 0.04 - 2.4 m/min / 30 steps Tailstock quill stroke: 125 mm Tailstock taper: MT2 Machine dimensions approx. LxWxH: 1.7 x 0.8 x 1.5 m Equipment and additional features: - Röhm 3-jaw chuck 160 mm - Chuck guard - Safety system WxH: 510x400 mm - Multifix tool holder (4 pcs) Psdpfeu Ixy Dox Aa Djpt - Centre in tailstock - Compound slide swivels +/- 45°, maximum travel = 100 mm - Cross slide travel = 300 mm feed - Pump for coolant system (without supply)

Stanje: rabljeno, Leto izdelave: 1960, Technical Details: Swing diameter over bed: 630 mm Swing diameter over saddle: 320 mm Turning length: 2,800 mm Distance between centers: 2,800 mm Swing diameter in gap: 700 mm Gap length: 450 mm Spindle bore: 70 mm Machine weight approx.: 4.4 t Machine dimensions approx. LxWxH: 4.7 x 1.5 x 1.5 m Thread cutting capability Accessories: Ppjdpou Ix A Ejfx Aa Dst 4-jaw chuck Various centers Gears Jaws and small parts Steady rest *

Stanje: rabljeno, Leto izdelave: 1975, Technical Details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 260 mm Turning length: 950 mm Centre height measured in bed: 220 mm Centre distance: 1000 mm Spindle speeds: 11.2 – 2240 rpm / 24 steps Spindle bore: 62 mm Tailstock quill travel: 210 mm Longitudinal feeds: 0.045 – 1.6 mm/rev – 32 steps Cross feeds: 0.02 – 0.71 mm/rev – 32 steps Total power requirement: 11 kW Approx. machine weight: n/a t Approx. machine dimensions (LxWxH): 3.3 x 1.2 x 1.6 m The machine is in very good condition (very quiet spindle operation) and available ex location Leipzig. Top slide swivels 360° 3-jaw chuck Ø 315 mm with jaws (internal/external) for speeds up to 2000 rpm. Thread cutting: metric, module, imperial Chip guard Chuck guard (mechanical) Podpfxov A Sqhj Aa Dopt MULTIFIX toolpost with Ø 40 mm boring bar holder Chip tray Coolant supply with pump Leadscrew protection Machine feet UVV (accident prevention regulation) pre-installed *

Stanje: rabljeno, Leto izdelave: 1994, Technical details: Required air pressure: 8 bar Total power requirement: 14 kW Approx. machine weight: 80–170 kg per machine MULTIFUNCTION STAMPING AND DRILLING AUTOMATON – ideally suited for aluminium window manufacturing. 3 units: - For Schüco aluminium window frame, mullion, and transom profiles S65 - For Schüco aluminium window sash profiles Royal S 55, S 65, and S 70 systems - For Schüco aluminium door profiles Royal S65 door base profiles - Foot pedal operation - Pneumatic air gun A N D Ppsdju Icyhopfx Aa Dot DRILLING AUTOMATON Application: - Drilling automaton for door hinges - Drill holders: for 8 drill bits; for use with 6 countersink drills, diameter 11/15 mm, approx. 80 mm long - Tool clamping by foot pedal, drilling by hand operation - Accessories: various attachments.

Stanje: rabljeno, Technical details: electric version - voltage/frequency: 380 V/Hz Total power requirement: 1.1 kW Machine weight approx.: 18 kg Dimensions L x W x H: 0.32 x 0.50 x 0.25 m EDGE CHAMFERING MACHINE, benchtop unit Application: chamfering, deburring Equipped with milling head Ø 65 mm with carbide inserts Motor speed 2,780 rpm Ppedeu Nggnjpfx Aa Dot Workpiece holding via 45° prism, with 2 supports (L x W: 500 x 40 mm), rotatable 15° - 45° Maximum chamfer width: 5.0 mm, angle 15° - 45°

Stanje: rabljeno, Technical details: Wire diameter - max.: 9.0 mm Wire diameter - min.: 2.0 mm Operating voltage: 380 V / 50 Hz Control voltage: 220 V Total power requirement: 18 kW Machine weight approx.: 5.0 t Dimensions lubrication unit: 830 x 650 x 1000 mm Ppjdpjvc Aklofx Aa Djt Machine dimensions approx. LxWxH: 3.3 x 1.5 x 1.45 m Control cabinet dimensions LxWxH: 0.7 x 1.5 x 1.75 m WIRE STRAIGHTENING AND CUTTING MACHINE / MACHINE WAS RETROFITTED WITH NEW CONTROLS IN 2000 A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of tension and compression springs, as well as leg springs, in both right- and left-hand windings. Springs can be produced with any pitch and body shape. Performance: up to 90 pcs/min. Spring outer Ø: 10 - 120 mm Wire feed length: unlimited, speed = 27 - 80 m/min. Coiling unit: Two-finger system for wire diameter Ø 2.0 - 9.0 mm; spring outer Ø 10 - 120 mm Single-finger system: wire diameter Ø 3.0 - 7.0 mm; spring outer Ø max. 60 mm Equipment: 5x feed rollers, wire take-up 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Wire spool holder POST, motor-driven, mandrel diameter Ø 1,400 mm Lubrication system Control cabinet cooler RITA Hydraulic unit A wide range of accessories and/or spare parts available on request! Subject to prior sale.

Stanje: rabljeno, Leto izdelave: 2016, Technical Details: Swing diameter over bed: 402 mm Swing diameter over cross slide: 245 mm Turning length: 1000 mm Centre distance: 1000 mm Centre height: 200 mm Swing diameter in gap: 560 mm Gap width: 120 mm Spindle speeds: 40 - 345 / 345 - 1015 / 1015 - 2800 rpm Feed rate: longitudinal: 0.05 - 0.752 mm/rev cross: 0.025 - 0.376 mm/rev Psdpfovav Sdex Aa Dopt Spindle bore diameter: Ø 42 mm Tailstock taper (ISO): MK4 Tailstock quill stroke: 180 mm Total connected load: 4.1 kW Machine weight approx.: 1.2 t Machine dimensions approx. (LxWxH): 2.4 x 1.0 x 1.7 m The lathe does not feature rapid traverse. Positioning via 2 axes Display via Pinacho Lathe Controller Multifix quick-change tool post with turning tool Coolant system Foot switch Thread cutting possible (metric, Whitworth, module, pitch)

Leto izdelave: 1998, stanje: rabljeno, Technical details: Profile width: 50 mm Working height: 950 mm Interface: RS 232 Pinout Ppedpfou Ibuwsx Aa Det Window profile processing machine suitable for continuous processing of materials such as plastic, aluminum, and timber window frames. Material transport is handled via a pneumatic conveyor and clamping system. The system comprises two workstations (machines), one electrical control cabinet, one operator control panel, and conveyor units. Additionally, it includes a stand with vibratory conveyor system, chip extraction unit, and a stand with receipt printer. Our photos show the machine first in its installed location and then additional shots of the plant ready for sale and transport. Workstation No. 1 (Machine 1): - Saw station with saw blade Ø 400 x 4.5 mm - Drill unit with clamping chuck (vertical, upward) - Drill unit with clamping chuck (horizontal) - Drill unit with clamping chuck (vertical, downward) - Twin drill unit with clamping chuck (vertical, downward) - 45° drilling unit with clamping chuck (upward) Workstation No. 2 (Machine 2): - Drill unit with clamping chuck for screw joints (vibratory bowl) (vertical, upward) - Milling spindle, horizontal, with 11 disc cutters - Triple drill unit with clamping chuck (vertical, downward) - Triple drill unit with clamping chuck (vertical, upward) - Triple drill unit with clamping chuck (horizontal) 2 motor-driven conveyor units: - L x W x H: 5,650 x 2,400 x 1,000 mm - Conveyor width: 1,980 mm 2 motor-driven conveyor units: - L x W x H: 2,150 x 2,750 x 1,050 mm - Conveyor width: 2,300 mm

Stanje: rabljeno, Leto izdelave: 1970, Technical Details: Swing diameter over bed: 325 mm Swing diameter over support: 150 mm Turning length: 1000 mm Turning length, facing: 165 mm / cross: 160 mm Center height over bed: 200 mm Length of gap: no gap mm Spindle speed range: 48 - 1,500 rpm / 10 steps Spindle bore: 40 mm Ppodpfx Aju Ixydsa Djt Feeds: longitudinal: 0.021–2.34 mm, cross: 0.09–1.6 mm Tailstock quill taper: MK 4 Tailstock quill travel: 125 mm Total power requirement: 2.2 kW Machine weight approx.: 1.0 t Machine dimensions approx. LxWxH: 2.1 x 0.7 x 1.2 m Thread cutting possible: Metric, Whitworth and module threads Equipment: - 3-jaw chuck Ø 200 mm with internal clamping jaws - Multifix quick-change tool post - Foot brake - Coolant pump (supply exclusive)