Hidravlični Žerjavi Za Dvigala nakup rabljenega (86.042)

Stanje: delavnici obnovljeno (rabljeno), Technical data Feeder bunker with hydraulic moving floor and bag opener for recyclables from yellow bags, commercial waste, and residual waste: Manufacturer: BRT HARTNER GmbH Model: HP5-3035 Year of manufacture: 2015 Bunker volume: 30 m³ Drive power: 17.5 kW Dimensions (current state): 13,200 x 3,050 x 4,350 mm (L x W x H) Condition of the machine: The feeder bunker with bag opener was in operation at a large recycling facility, where recyclables from yellow bags or commercial waste were tipped into the bunker using wheel loaders, bags were opened via the bag opener, and materials were discharged dosed either to a sorting plant or for further processing. The system functioned flawlessly until disassembly and was replaced by a larger machine with higher throughput. The machine was dismantled in our workshop into individual components, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and/or the following spare parts were renewed: – Disassembly of the feeder bunker and bag opener into individual parts. Cleaning, partial sandblasting, priming, and painting of steel components. – Various wear and cover plates were newly manufactured and installed. – Cutting off worn ends (approx. 40 cbm) of the moving floor tubes. Welding new tubes and smoothing the moving floor tubes. – Replacement of all sliding plastic plates for the hydraulic moving floor. – Removal of the hydraulic unit from the moving floor, complete drainage of the hydraulic oil tank, replacement of oil filters, refilling with new hydraulic oil. – Replacement of all three hydraulic manifolds, all valves, oil sight glass, and all hydraulic hoses on the hydraulic power unit. – All three hydraulic cylinders of the moving floor: seals and hydraulic hoses replaced. – All six end switches (proximity sensors) of the moving floor were replaced. – Conveyor chains left and right of the scraper conveyor replaced. – Seven scraper bars of the scraper conveyor replaced. – Drive motor for the bag opener rotors replaced. – All nine pneumatic cylinders for the pressure pipes replaced. All pneumatic lines and fittings renewed. – All sliding plastic plates for the hydraulic adjustment of the bag opener renewed. The bag opener can be moved in depth to allow the system to be used for commercial or residual waste without the bag opener if required. – Side impact protection plates on both sides renewed. – Various wear parts of the bag opener replaced. Bwsdpsyizxrofx Agtel – The entire system was completely rewired and reconnected electrically. – The system control in the control cabinet was reverted by BRT Hartner to standalone single unit operation and the standard program was reloaded. – The system was commissioned and tested by BRT Hartner; see the function video. Notes: Documentation (operating manual, CE declaration, electrical/hydraulic diagrams) is available. Inspection possible by appointment. We accept no liability for the technical specifications or possible errors.

Stanje: novo, Shaft diameter: 580 mm Working speed: 3-6 m/min Motor power: 30 kW Length: 2760 mm Width: 2310 mm Height: 2680 mm Approx. weight: 14,400 kg Technical specifications: - Welded frame made of steel construction - 3 rollers driven - Hardened and ground shafts made from high-strength special steel - Rollers are hardened and ground - Horizontal and vertical working position - Standard hardened rollers - Mobile control panel Bwedpfx Agjh Alh Hetjl - Angular side guide rollers - Brake motor for precision bending - Digital displays (2 units) Options: - STANDARD digital display - NC unit 10Screen EURO 11,500,--

Stanje: rabljeno, Electro-hydraulic scissor lift pallet truck Scissor lift truck, pallet truck for pallets TOYOTA / BT Type HTH 10 E Serial no. 481795 Year of manufacture: 2005 Load capacity: 1,000 kg Max. lift height: 800 mm Lowered height: 85 mm Fork length: 1,190 mm - Electric lifting via 12V battery operation - Manual lift via hand lever, as with pallet trucks - TOYOTA Industrial Equipment Europe SARL (Made in France) - Long-stroke hydraulic cylinder - With single roller Bedpfx Agsg D H Ivjtowl - Integrated charger (mains voltage 230V, with cold appliance plug) Net weight: 140 kg Good condition

Stanje: rabljeno, Technical Details: Sheet width: 1000 mm Sheet thickness: 3.0 mm Minimum sheet thickness: 0.5 mm Frame opening: 920 mm Number of straightening rollers: 4 pcs. top / 4 pcs. bottom Roller diameter: approx. 75 mm Number of rollers: 2 pcs. top and 2 pcs. bottom Machine weight approx.: 6.5 t Dimensions (L x W x H): 3.8 x 2.2 x 2.1 m This is a plate straightening machine with hydraulic feed. Further features: 4 top straightening rollers Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 bottom straightening rollers Ø 75 x 830 mm, fixed, hydraulic 4 extraction rollers Ø 110 x 480 mm, 2 adjustable at the top (approx. 20 mm) and 2 at the bottom, hydraulic Bwsdpfx Aovgbgajgtol Roller mounts Infeed height 1400 mm Equipped with hydraulic unit External operation Recommendation: Complete as a strip processing line (decoiler + loading device + straightening machine with hydraulic feed) available for sale, optionally together with stock no. 0100572.

Stanje: novo, Shaft diameter: 60 mm Upper roll diameter: 215 mm Lower roll diameter: 215 mm High-performance hydraulics: 16 l/min Working speed: 4 m/min Motor power: 1.5 kW Length: 1000 mm Width: 1400 mm Height: 1650 mm Approx. weight: 950 kg Technical Data: - Welded steel frame - 3 rolls are driven by motor - Hardened shafts made of special steel - Upper roll hydraulically adjustable - Horizontal and vertical operating positions - Standard rolls - Guide rolls - Equipped with a brake motor for precision bending - Portable control panel Options: - Digital readout EURO 700 - NC unit EURO 7,000 - Lateral angle guide rolls EURO 1,400 HPK 50 file Type Size Min. Dia Notes 1 60x10 20x10 600 300 Standard Rolls 2 100x15 50x10 600 300 Standard Rolls 3 35x35 15x15 600 300 Standard Rolls 4 Ø35 Ø20 600 300 Optional Rolls 5 Ø70x2 Ø25x1.5 1200 400 Optional Rolls 6 2”x2.9 1/2”x2.3 1000 300 Optional Rolls 7 70x30x3 30x15x2 1500 400 Optional Rolls 8 50x3 20x2 1600 400 Optional Rolls 9 50x50x6 30x30x3 600 400 Optional Rolls 10 50x50x6 30x30x3 900 600 Optional Rolls 11 60x7 30x4 600 400 Standard Rolls 12 60x7 30x4 700 400 Standard Rolls 13 60x7 30x4 700 400 Standard Rolls 14 UPN 80 UPN 30 800 400 Optional Rolls* 15 UPN 80 UPN 30 1200 600 Standard Rolls* Bwodpfx Aod Ab H Rogtel * Special washer (spacer) may be required / Only with the special beam bending attachment • Capacities are based on a plate yield strength of 260 N/mm²

Stanje: novo, Shaft diameter: 315 mm Working speed: 7 m/min Motor power: 7.5 kW Length: 2000 mm Width: 1450 mm Height: 1700 mm Weight approx.: 3650 kg Technical specifications: - Welded frame made of steel construction - 3 rolls are driven - Hardened and ground shafts made of high-strength special steel - Rolls are hardened and ground - Horizontal and vertical working position - Hardened standard rolls - Mobile control panel - Angle side guide rollers - Equipped with brake motor for precision bending - Digital readouts (2 pcs) Options: Bedsh Alicopfx Agtswl - STANDARD digital readout - NC unit 7 Screen EURO 9,000,--

Stanje: novo, Angle iron/leg length: 60 x 60 x 6 Double-T beam across x-axis: UPN 80, UNP 30 U-channel across x-axis: UPN 65, UPN 30 Total power requirement: 3 kW Weight approx.: 1.4 t Dimensions (LxWxH): 1200 x 1100 x 800 mm - 4 rollers, 2 driven rollers Bwjdpfx Aed Acazegtjl - 3 hydraulic adjustments - Universal rollers - Lateral guide rollers - Control panel

Stanje: novo, Shaft diameter: 50 mm Upper roll diameter: 152 mm Lower roll diameter: 162 mm High-performance hydraulics: 8 Working speed: 4.5 m/min Motor power: 1.1 kW Length: 810 mm Width: 950 mm Height: 1500 mm Approx. weight: 500 kg Technical Data: - Welded steel frame - 3 rolls are motor-driven - Hardened shafts made of special steel - Upper roll hydraulically adjustable - Horizontal and vertical working positions - Standard rolls - Guide rolls - Brake motor for precision bending - Portable control panel Options: - Digital display €700 - NC unit €7,000 - Angular side guide rolls €1,400 HPK 50 file Type Size Min. Dia Notes 1 60x10 20x10 600 300 Standard Rolls 2 100x15 50x10 600 300 Standard Rolls 3 35x35 15x15 600 300 Standard Rolls 4 Ø35 Ø20 600 300 Optional Rolls 5 Ø70x2 Ø25x1.5 1200 400 Optional Rolls 6 2”x2.9 1/2”x2.3 1000 300 Optional Rolls 7 70x30x3 30x15x2 1500 400 Optional Rolls 8 50x3 20x2 1600 400 Optional Rolls Bwjdpfx Agjd Ab H Sotel 9 50x50x6 30x30x3 600 400 Optional Rolls 10 50x50x6 30x30x3 900 600 Optional Rolls 11 60x7 30x4 600 400 Standard Rolls 12 60x7 30x4 700 400 Standard Rolls 13 60x7 30x4 700 400 Standard Rolls 14 UPN80 UPN30 800 400 Optional Rolls * 15 UPN80 UPN30 1200 600 Standard Rolls * * Special washer (spacer) may be required / Only with special Beam Bending Attachment • Capacities are based on 260 N/mm² yield strength of plate

Stanje: novo, Shaft diameter: 480 mm Working speed: 3-6 m/min Motor power: 22 kW Length: 2500 mm Width: 2200 mm Height: 2300 mm Weight approx.: 9300 kg Technical data: - Welded frame made of steel construction - 3 driven rolls Bwodpfx Aoh Alh Rsgtel - Hardened and ground shafts made of high-strength special steel - Rolls are hardened and ground - Horizontal working position - Hardened standard rolls - Mobile control panel - Lateral angle guide rolls - Equipped with brake motor for precision bending - Digital readouts (2 units) Options: - STANDARD digital readout - NC unit 10 Screen EURO 11,500,--

Stanje: novo, Shaft diameter: 580 mm Working speed: 2-5 m/min Motor power: 30 kW Length: 3000 mm Width: 2310 mm Height: 3100 mm Weight approx.: 16,500 kg Technical specifications: - Welded steel frame construction Bwjdpfx Aeh Alh Ujgtjl - 3 driven rollers - Hardened and ground shafts made of high-strength special steel - Rollers are hardened and ground - Horizontal working position - Standard hardened rollers - Mobile control panel - Lateral angle guide rollers - Brake motor for precision bending - Digital displays (2 units) Options: - STANDARD digital display - NC unit 10” screen EURO 11,500,-- -

Stanje: novo, Angle iron/leg length: 80 x 80 x 8 Double-T beam across x-axis: IPN 120, IPN 80 U-beam across x-axis: UPN 140 Total power requirement: 4 kW Approx. weight: 1,700 kg Dimensions (LxWxH): 1,450 x 1,000 x 1,400 mm Technical data Shaft diameter: 80 mm Roll diameter: 245 mm Driven rolls: 3 Motor power: 4 kW Speed: 6 m/min. Bending performance (cross-section/min. diameter): Flat bar upright: 100x20 mm / 2,000 mm; 80x20 mm / 800 mm; 30x10 / 300 mm Flat bar flat: 125x25 mm / 600 mm; 60x5 mm / 300 mm Square bar: 45x45 mm / 500 mm; 15x15 mm / 380 mm Round bar: Ø 50 mm / 500 mm; Ø 15 mm / 380 mm Tube: Ø 100x2.5 mm / 1,200 mm; Ø 15x1 mm / 380 mm; Ø 3x5.48 / 800 mm; Ø 1/2x2.77 / 380 mm Rectangular tube upright: 80x25x3 mm / 800 mm; 25x15x2 mm / 350 mm Square tube: 70x70x3 mm / 1,300 mm; 25x25x2 mm / 350 mm Angle iron leg outwards: 80x80x8 mm / 800 mm; 30x30x3 mm / 400 mm Angle iron leg inwards: 70x70x7 mm / 700 mm; 30x30x3 mm / 450 mm UPN leg outwards: UPN 140 / 1,600 mm; UPN 120 / 900 mm; UPN 100 / 800 mm UPN leg inwards: UPN 140 / 1,600 mm; UPN 120 / 1,000 mm; UPN 100 / 800 mm IPN flat: IPN 120 / 600 mm; IPN 80 / 400 mm Equipment - 3 motor-driven rolls - Rigid welded steel construction - Hydraulic adjustment of the two bottom rolls - Digital display of the bottom roll positions on a separate control panel Bodpfxjd Ab H To Agtewl - Side guide rolls adjustable over 3 axes - Usable in horizontal and vertical positions - Forward and reverse drive - Machine and equipment comply with CE regulations Options: - NC Unit 7 Screen EUR 9,000 We have more than 190 references!

Stanje: dober (rabljeno), Elektromehanski pogon za ventile, pogon ventila, aktuator, pozicijski motor - Pogon ventila, neprekinjen regulacijski signal, povratna informacija položaja - Tip: Siemens SKC60 - Neprekinjen vhodni signal - Brez vzdrževanja elektrohidravlika - Ročna nastavitev in prikaz položaja Tehnični podatki: - Čas delovanja (regulacijski način): odpiranje 120 s, zapiranje 20 s - Nazivni hod: 40 mm - Sila pogona: 2800 N - Obratovalna napetost: AC 24 V Bwjdpob H Ebkefx Agtjl - Poraba: 24 VA/18 W - Tip krmiljenja: DC 0...10 V, DC 4...20 mA, 0...100 Ohm - Teža: 10 kg - Količina: 1 kos na voljo - Cena: na kos

Stanje: dober (rabljeno), Leto izdelave: 1977, številka stroja/vozila: 22247, Offerta 23250 Bwjdpfx Agev Hzr Nstjl Dati tecnici: - Capacità di piegatura - Tubo con 45 kg / mm² Ø 6 - 48 mm - Angolo massimo di piegatura 180° - Raggio massimo di piegatura 145 mm - Azionamento 400 V / 1,7 kW - Ingombro circa L 900 x H 1100 x P 1400 mm - Peso circa 600 kg - Dotazione: - Sega circolare per tubi - Dispositivo di sbavatura interna ed esterna del tubo - Dispositivo di svasatura tubi - Senza utensili

Stanje: skoraj kot novo (rabljeno), Jeklene konstrukcije - 2,50 PLN na kg Bedpfsy H Eu Tsx Agtewl

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, nosilnost: 250 kg, Oprema: žerjav, GEDA Lift 250 Comfort se proizvaja že desetletja in je med krovci ter gradbeniki zelo priljubljen zaradi svoje zanesljivosti, saj omogoča hiter in enostaven transport tovora na želeno delovno višino. Bodpoxvyagofx Agtewl

Stanje: dober (rabljeno), The machine was used for washing fruit and olives and is in good condition. Bwodpfxjvtf T Do Agtjl

Stanje: dober (rabljeno), Leto izdelave: 1996, Used capper, previously part of a bottling line for carbonated drinks and water. Fully functional and in good condition. Bedpfovtpt Isx Agtjwl

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Machine used in a fish processing plant, previously used for washing squid. In very good condition, like new. Bwodpfov T Rllex Agtsl

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 100281518, skupna višina: 2.260 mm, skupna širina: 1.550 mm, skupna dolžina: 1.685 mm, višina izdelka (maks.): 310 mm, največja širina izdelka: 150 mm, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! Nova cena je znašala več kot 100.000 EUR! Naprava je pripravljena za nakladanje in transportno zapakirana! Nakladanje lahko prevzame prodajalec. Bwedpfx Agsy Ath Hetjl TEHNIČNE PODROBNOSTI Maks. širina za pregled: 150 mm Maks. višina za pregled: 310 mm Transportni sistem Tip transporterja: Vrtljiva miza Hitrost: 12 – 45 m/min PODROBNOSTI O STROJU Rentgenski generator Napetost: 30 – 75 kV Tok: 1 – 8 mA Moč: maks. 300 W Dimenzije (D x Š x V): 1.685 x 1.550 x 2.260 mm Zaščitni razred: IP65 / IP66 Električni podatki Napajanje: 200 – 240 V Frekvenca: 50 / 60 Hz OPREMA Vrtljivomizni transporter Hermetično zračno hlajenje Rentgenski inšpekcijski sistem

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 32 t, delovna višina: 200 mm, model krmilnika: Siemens 840D, delovna dolžina: 2.150 mm, TEHNIČNI PODATKI Dolžina upogibanja: 2.150 mm Maksimalna višina upogiba: 200 mm Minimalna dolžina/širina med upogibi: 160–350 mm Pritisna sila: 32 t PODROBNOSTI STROJA Krmiljenje: Siemens 840D Dimenzije in teža Dimenzije (D x Š x V): 8.500 x 7.000 x 2.850 mm Teža: 30.000 kg OPREMA Avtomatska menjava orodja Manipulator Obratni upogibni cikel Sistem za centriranje pločevine Bwodpfx Agoy D Ihwstjl Dodatna zgornja orodja Sistem za nalaganje in razkladanje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, dolžina obdelovanca (maks.): 3.048 mm, širina obdelovanca (maks.): 1.524 mm, najv. debelina pločevine: 3 mm, obremenitev mize: 5.000 kg, The control system and software of the machine have been renewed! TECHNICAL DETAILS Sheet thickness for blanks with tensile strength 400 N/mm² max.: 3.5 mm Sheet thickness min.: 0.5 mm Punch head force max.: 40 presses with max. force of 7 t & 4 presses with max. force of 26 t Lower cylinder force max.: 6 t Double punch force: 12 t (2 hydraulic punches) Input panel length min.: 370 mm Bwsdey Emr Djpfx Agtjl Input panel length max.: 3,048 mm Input panel width min.: 300 mm Input panel width max.: 1,524 mm Input panel diagonal max.: 3,408 mm Output panel length min.: 250 mm Output panel length max.: 3,048 mm Output panel width min.: 60 mm Output panel width max.: 1,524 mm Vertical stroke lifting table: 550 mm Usable carrying capacity of lifting table: 5,000 kg Minimum dimensions of transportable sheet stack: 300 x 100 mm MACHINE DETAILS Electrical data Voltage: 380 V Frequency: 50 Hz Current: 119 A Rated power: 61 kW Cooling capacity of the unit: 32.2 kW EQUIPMENT Scissor lift table TC27155C Powered roller conveyor PRL3814F Universal destacking device DUF15 Punch head H2 Oil-hydraulic power unit C1515 (3-part pump unit) Lower cylinder EI09 Double rotary punch P2R36 Water-air cooling unit R121 Refrigerant R407C Software RIO Control and management system MMACHNT-MICROMach Processor PENTIUM INTEL II 400 MHz WINDOWS NT Documentation

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 354, skupna dolžina: 2.150 mm, skupna višina: 1.600 mm, skupna širina: 850 mm, proizvajalec krmilnikov: Siemens, Oprema: CE označba, PODROBNOSTI O STROJU Proizvajalec krmiljenja: Siemens Tip krmiljenja: CNC Bodpfx Asy Avuvegtswl Moč motorja: 4,0 kW Mere & teža Mere (D x Š x V): 2.150 x 850 x 1.600 mm Transportna teža: 800 kg Transportni paketi: 1 OPREMA Dokumentacija CE certifikat

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, No reserve price – guaranteed sale to the highest bidder! Further details regarding the technical specifications and configuration of the plant can be found in the attached documents. TECHNICAL DETAILS Inlet Conditions Design volumetric flow: 40,000 Nm³/h Temperature: 25 °C Relative humidity: 50% Pollutants V.O.C. inlet concentration: max. 305 mg/Nm³ Average LHV: 7,500 kcal/kg Dust: < 3 mg/Nm³ Outlet Conditions after RC Unit Volumetric flow: max. 40,150 Nm³/h Temperature: 30 – 50 °C TOC concentration: max. 20 mgC/Nm³ Filtration Unit Air flow rate: max. 44,000 m³/h Operating temperature: 20 °C Rotary Concentrator Number of sectors: 3 Adsorbing active material: Zeolite Bjdoyz Rf Tspfx Agtewl Process flow rate: max. 41,000 Nm³/h Pollutant inlet concentration: max. 305 mg/Nm³ Process temperature: 20 °C Adsorption air flow: max. 38,950 Nm³/h Purge air flow: max. 2,050 Nm³/h Desorption air flow: max. 2,050 Nm³/h Desorption outlet concentration: max. 5,700 mg/Nm³ Blower BL-01 Air flow rate: max. 4,300 Nm³/h Operating temperature: 60 °C Static pressure: 5,900 Pa Total pressure: 6,290 Pa Power consumption: max. 12.8 kW Installed power: 18.5 kW Sound pressure level at 1.5 m: max. 89 dB(A) Blower BL-101 Air flow rate: max. 36,700 Nm³/h Operating temperature: 35 °C Static pressure: 2,400 Pa Total pressure: 2,620 Pa Power consumption: max. 38.4 kW Installed power: 55 kW Sound pressure level at 1.5 m: max. 84 dB(A) Blower BL-02 Air flow rate: max. 135 Nm³/h Operating temperature: 30 °C Static pressure: 5,000 Pa Total pressure: 5,050 Pa Power consumption: max. 0.4 kW Installed power: 2.2 kW Sound pressure level at 1.5 m: max. 70 dB(A) EQUIPMENT Documentation/manual Note: The plant has already been dismantled.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, obratovalne ure: 11.337 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 234917, vpenjalna sila: 1.600 kN, premer vijaka: 30 mm, Oprema: dokumentacija / priročnik, Stroj izhaja iz proizvodnje v čisti sobi in je bil izključno obratovan z PP-materialom. Polž je zato v zelo dobrem in vzdrževanem stanju. TEHNIČNI PODATKI Bwsdpfxey A Exds Agtsl Zapiralna sila: 1.600 kN Premer polža: 30 mm PODATKI O STROJU Teža: 8.400 kg Obratovalne ure: 11.337 h OPREMA Dokumentacija/Uporabniški priročnik Obsežna posebna oprema

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 2.157 kN, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! TEHNIČNE PODROBNOSTI Bwsdpjy Exdxjfx Agtsl Zapiralna sila: 220 t Premer polža: 55 mm + 40 mm Največji volumen vbrizga: 618 cm³ + 251 cm³ PODROBNOSTI O STROJU Vpenjalna plošča: 960 x 830 mm Minimalna višina za vgradnjo orodja: 320 mm Maksimalna višina za vgradnjo orodja: 730 mm OPREMA EC100/A03 Opomba: Ob nakupu več artiklov z iste lokacije (glejte ponudbe spodaj) bodo veljali nižji stroški za demontažo in nakladanje.