Hesse By Isitan Edgebender 1230 nakup rabljenega (10.300)

Stanje: novo, Stanje: novo Dobavni rok: približno 12 tednov po naročilu Država izvora: Turčija Cena: 8.900 € Kjdpfoypbw Usx Al Tjnb Leasing obrok: 171,77 € Pritisna sila: 100 t Cilinder: fiksen ali pomičen - fiksen Hod: 300 mm Čista širina stojala: 1570 mm Premer bata: 220x160 mm Delovna hitrost: 5 mm/s Hitrost povratka: 10 mm/s Dolžina: 2500 mm Širina: 1000 mm Višina: 2200 mm Teža: 1600 kg Varjena jeklena konstrukcija Poljubna stop pozicija Tlačni kazalnik Varnostni ventil proti preobremenitvi 2 V prizmi Višinsko nastavljiva miza Naprava za dvig/spuščanje mize Upravljanje z upravljalno ročico Oprema v skladu s CE predpisi Navodila za uporabo v NEMŠČINI in ANGLEŠČINI

Stanje: novo, Stanje: novo Dobavni rok: cca 12 tednov od naročila Država porekla: Turčija Cena: 5.500 € Leasing rata: 106,15 € Tlačna sila: 30 t Cilinder: fiksen ali pomičen – fiksen Hod: 775 mm Delovna hitrost: 5 mm/s Hitrost povratka: 10 mm/s Dolžina: 1.500 mm Širina: 700 mm Višina: 2.015 mm Teža: 400 kg Varjena jeklena konstrukcija Možnost ustavitve v poljubnem položaju Tlačni indikator Kodpfxjypbxfj Al Tenb Varnostni ventil proti preobremenitvi 2 V-prizmi Miza nastavljiva po višini Naprava za dvig/spust mize Upravljanje z ročico Oprema v skladu s CE predpisi Navodila za uporabo v NEMŠČINI in ANGLEŠČINI

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €48,100 Leasing rate: €918.71 Bending length: 2,550 mm Max. bending capacity (mild steel): 9 mm Max. sheet thickness without pre-bending at D=5x top roll: 9 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 7 mm Max. sheet thickness with pre-bending at D=5x top roll: 7 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 5 mm Top roll diameter: 220 mm Bottom roll diameter: 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 4,600 kg 4-roll system Top roll drive via hydraulic motor and planetary gearbox, bottom rolls driven by gears and cardan shaft Hydraulic adjustment of bottom and side rolls Knodpeyb Sywjfx Al Tjb Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic release of the top roll Hydraulic drop end 2 working speeds Overload protection Mobile control panel Equipment complies with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €31,600 Leasing rate: €603.56 Bending length: 2,050 mm Max. bending capacity - mild steel: 6 mm Max. plate thickness without pre-bending at D=5x top roll: 6 mm Max. plate thickness without pre-bending at D=1.5x top roll: 4 mm Max. plate thickness with pre-bending at D=5x top roll: 4 mm Max. plate thickness with pre-bending at D=1.5x top roll: 3 mm Top roll diameter: 150 mm Lower roll diameter: 150 mm Side roll diameter: 130 mm Rolling speed: 1.5 / 6 m/min Motor power: 4 kW Length: 4,250 mm Width: 960 mm Height: 1,100 mm Weight: 2,800 kg 4 rolls Top roll driven by hydromotor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of the lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Kedpfx Ajyb Szbel Tjnb Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Movable control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: Max. plate thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €46,300 Leasing rate: €884.33 Bending length: 2,050 mm Max. bending capacity – mild steel: 11 mm Max. plate thickness without pre-bending at D=5x top roll: 11 mm Max. plate thickness without pre-bending at D=1.5x top roll: 9 mm Max. plate thickness with pre-bending at D=5x top roll: 9 mm Max. plate thickness with pre-bending at D=1.5x top roll: 7 mm Top roll diameter: 220 mm Bottom roll diameter: 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4,400 mm Width: 1,150 mm Height: 1,250 mm Weight: 4,080 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox; bottom roll driven by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Ksdpfxoyb Szue Al Tenb Mobile control panel Equipment compliant with CE regulations OPTIONS: Infinitely variable roll speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: Max. plate thickness is 50% of nominal capacity Cone length must be max. 30% or more than 60% of roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €43,550 Leasing rate: €831.81 Bending length: 1,550 mm Max. bending capacity – mild steel: 12 mm Max. sheet thickness without pre-bending at D=5x top roller: 12 mm Max. sheet thickness without pre-bending at D=1.5x top roller: 10 mm Max. sheet thickness with pre-bending at D=5x top rollers: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roller: 8 mm Top roller diameter: 220 mm Lower roller diameter: 200 mm Side roller diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,600 kg 4-roll design Top roll driven by hydromotor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll lifting Hydraulic drop-end bearing 2 working speeds Overload protection Movable control panel Ksdpfx Alsynmx Is Tsnb Equipment according to CE regulations OPTIONS: Infinitely variable roll speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL ROLLING: Max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €73,200 Leasing rate: €1,383.48 Bending length: 2,050 mm Max. bending capacity – mild steel: 20 mm Max. sheet thickness without prebending at D=5x upper roll: 20 mm Max. sheet thickness without prebending at D=1.5x upper roll: 16 mm Max. sheet thickness with prebending at D=5x upper roll: 16 mm Max. sheet thickness with prebending at D=1.5x upper roll: 12 mm Upper roll diameter: 280 mm Lower roll diameter: 280 mm Side roll diameter: 220 mm Rolling speed: 1.5 / 5 m/min Motor power: 16.5 kW Length: 4,350 mm Width: 1,700 mm Height: 1,850 mm Weight: 8,550 kg 4 rolls Fully hydraulic drive for upper and lower rolls Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic release of upper roll Hydraulic drop-end bearing 2 working speeds Knedpfx Aleynmyle Tjb Centralized lubrication Overload protection Mobile control panel Equipment according to CE regulations OPTIONS (PRICES ON REQUEST): Steplessly variable rolling speed Hydraulic side support Hydraulic top support NC control system IMPORTANT NOTES ON CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €60,600 Leasing rate: €1,145.34 Bending length: 3,100 mm Max. bending capacity (mild steel): 10 mm Max. sheet thickness without pre-bending at D = 5x top roller: 10 mm Max. sheet thickness without pre-bending at D = 1.5x top roller: 8 mm Max. sheet thickness with pre-bending at D = 5x top roller: 8 mm Max. sheet thickness with pre-bending at D = 1.5x top roller: 6 mm Kjdjynm D Repfx Al Tonb Top roller diameter: 260 mm Bottom roller diameter: 260 mm Side roller diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 5,350 mm Width: 1,600 mm Height: 1,550 mm Weight: 7,685 kg 4 rollers Top roller driven by hydraulic motor and planetary gearbox, bottom rollers driven by gear drive and cardan shaft Hydraulic adjustment of bottom and side rollers Digital display for bottom and side roller positions Hardened rollers Cone bending device Hydraulic release of the top roller Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control console Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: Maximum sheet thickness is 50% of the rated capacity Cone length must be a maximum of 30% or more than 60% of the roller length Hardened rollers are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €111,500 Leasing rate: €2,107.35 Bending length: 3,100 mm Max. bending capacity – mild steel: 20 mm Max. plate thickness without pre-bending (D=5x top roll): 20 mm Max. plate thickness without pre-bending (D=1.5x top roll): 16 mm Max. plate thickness with pre-bending (D=5x top roll): 16 mm Max. plate thickness with pre-bending (D=1.5x top roll): 12 mm Kodpoynm Ebofx Al Tonb Top roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 6,000 mm Width: 2,200 mm Height: 1,900 mm Weight: 15,000 kg 4-roll design Full hydraulic drive of top and bottom rolls Hydraulic adjustment of lower and side rolls Digital readout for lower and side roll positions Hardened rolls Conical bending device Hydraulic release of the top roll Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The maximum plate thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Stanje novo Dobavni rok cca 12 tednov od naročila Država izvora Turčija Cena 27.800 € Leasing obrok 530,98 € Dolžina upogibanja 3030 mm Maks. upogibna zmogljivost - konstrukcijsko jeklo 4 mm Maks. debelina pločevine brez pred-upogibanja - konstrukcijsko jeklo 4 mm Maks. debelina pločevine s pred-upogibanjem - konstrukcijsko jeklo 2 mm Premer zgornjega valja 180 mm Moč motorja 4 kW Dolžina 4600 mm Širina 1120 mm Višina 1020 mm Teža 4250 kg 3 valji Asimetrična razporeditev valjev - s pred-upogibanjem 2 gnana valja Motorizirano nastavljanje stranskega in pritiskalnega valja Digitalni prikaz položaja stranskega in pritiskalnega valja Zgornji valj se lahko izklopi naprej Tek naprej/nazaj Kjdeynm Ezopfx Al Tenb Kaljeni valji Premična upravljalna plošča Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI (Simbolna slika)

Stanje: novo, Stanje: novo Dobavni rok: približno 12 tednov po naročilu Država izvora: Turčija Cena: 35.400 € Leasing obrok: 676,14 € Dolžina upogibanja: 3030 mm Največja zmogljivost upogibanja (konstrukcijsko jeklo): 6 mm Največja debelina pločevine brez upogibanja: 6 mm Največja debelina pločevine z upogibanjem: 4 mm Premer zgornjega valja: 220 mm Moč motorja: 5,5 kW Dolžina: 4750 mm Širina: 1200 mm Višina: 1150 mm Teža: 4920 kg 3 valji Asimetrična razporeditev valjev z pred-upogibanjem Kodpfx Aeynm E Usl Tjnb 2 pogonska valja Motorizirano nastavljanje stranskega in pritisnega valja Digitalni prikaz položaja stranskega in pritisnega valja Zgornji valj izklopljiv naprej Delovanje naprej/nazaj Pobrušeni valji Premična upravljalna konzola Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI (Simbolna fotografija)

Stanje: novo, Condition: new Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €98,600 Leasing rate: €1,863.54 Bending length: 3,100 mm Kjdpfxoynm Hfo Al Tjnb Max. bending capacity – structural steel: 16 mm Max. plate thickness without pre-bending at D=5x top roller: 16 mm Max. plate thickness without pre-bending at D=3x top roller: 13 mm Max. plate thickness without pre-bending at D=1.5x top roller: 16 mm Max. plate thickness with pre-bending at D=5x top rollers: 14 mm Max. plate thickness with pre-bending at D=1.5x top roller: 12 mm Top roller diameter: 300 mm Bottom roller diameter: 300 mm Side roller diameter: 240 mm Max. opening: 50 mm Working height: 1,140 mm Motor power: 18.5 kW Length: 5,310 mm Width: 1,660 mm Height: 1,140 mm Weight: 11,100 kg 4 rollers PLC Fully hydraulic drive of top and bottom roller (from 30 mm bending capacity for all four rollers) via planetary gearbox Hydraulic side roller adjustment with electronic synchronization Hydraulic bottom roller adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rollers Cone bending device Hydraulic drop-end bearing Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment according to CE standards OPTIONS: Upper and side plate supports NC control IMPORTANT POINTS FOR CONICAL ROLLING: Max. plate thickness is 50% of nominal capacity Cone length may be max. 30% or must be more than 60% of the roller length Hardened rollers are recommended

Stanje: novo, Stanje: novo Dobavni rok: približno 10 tednov od naročila Država izvora: Turčija Cena: 70.300 € Leasing obrok: 1.328,67 € Tlačna sila: 110 t Dolžina mize: 900 mm Širina mize: 540 mm Prehodna odprtina v mizi: 180 mm Hod: 14 - 114 mm Število hodov: 60 1/min Deska: 490x325 mm Nastavitev deske: 90 mm Iztok: 280 mm Motor: 7,5 kW Dolžina: 1.870 mm Širina: 1.320 mm Višina: 2.800 mm Teža: 5.600 kg Kodpfx Aoynnbkel Tjnb 8-točkovno vodilo deske Sprednja zaščita s svetlobno zaveso Ročno nastavljanje deske Mehanska zaščita pred preobremenitvijo Samodejno mazanje Oprema v skladu s CE predpisi Navodila za uporabo v NEMŠČINI in ANGLEŠČINI

Stanje: novo, Stanje: novo Dobavni rok: cca 8 tednov od naročila Država izvora: Turčija Cena: 28.390 € Leasing rata: 542,25 € Debelina pločevine - konstrukcijsko jeklo: 0,4 - 3 mm Kjdsynnfvopfx Al Tonb Maks. širina pločevine: 300 mm Maks. prečni prerez: 900 mm² Premer podajalnih valjev: 80 mm Podajalna hitrost: 75 m/min Pospešek podajanja: 10 m/s² Navor motorja: 10 Nm Stožčasto-čelni zobniški prenos WATTDRIVE (Izdelano v Avstriji) Pnevmatski sistem FESTO Servo pogon in krmiljenje SIEMENS 7'' barvni zaslon na dotik SIEMENS 2 pogonska valja Zunanji dajalnik položaja (enkoder) OPCIJA: Ročni volan in modul za daljinsko vzdrževanje Simlinx € 4.290,--

Stanje: novo, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Kedpfx Asynnhkel Tjnb Price: €10,800 Leasing rate: €207.36 Shaft diameter: 35 mm Upper roller diameter: 137 mm Lower roller diameter: 137 mm Driven rollers: 3 Motor power: 1.1 kW Speed: 7 m/min Flat bar vertical (cross-section / min. diameter): 35x8 mm / 300 mm Flat bar horizontal (cross-section / min. diameter): 50x12 mm / 400 mm Square steel (cross-section / min. diameter): 18x18 mm / 250 mm Round steel (cross-section / min. diameter): Ø22 mm / 200 mm Tube (cross-section / min. diameter): Ø40x1.5 mm / 500 mm Rectangular tube vertical (cross-section / min. diameter): 30x15x2.5 mm / 500 mm Square tube (cross-section / min. diameter): 25x25x2 mm / 450 mm Angle steel leg outside (cross-section / min. diameter): 35x35x5 mm / 400 mm Angle steel leg inside (cross-section / min. diameter): 30x30x4 mm / 550 mm Length: 1050 mm Width: 500 mm Height: 1250 mm Weight: 350 kg 3 driven rollers (with brake motor) Hardened and ground shafts Hydraulic adjustment of both lower rollers Usable both horizontally and vertically Standard roller set Foot pedal for forward and reverse operation Two digital displays Control panel Machine and equipment conform to CE regulations Operating manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €83,800 Leasing rate: €1,583.82 Bending length: 2,550 mm Max. bending capacity - structural steel: 15 mm Max. sheet thickness without pre-bending at D=5x top roll: 15 mm Max. sheet thickness without pre-bending at D=3x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 12 mm Max. sheet thickness with pre-bending at D=5x top roll: 12 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 10 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 4,760 mm Width: 1,660 mm Height: 1,155 mm Weight: 8,950 kg 4 rolls PLC control Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end bearing Mobile control panel Knsdpfx Aleypbp De Tsb Overload protection Operating manual in GERMAN and ENGLISH Equipment compliant with CE regulations OPTIONS: Upper and side sheet supports NC control system IMPORTANT NOTES FOR CONICAL ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length can be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Knodpfx Aljypbqhs Teb Price: €95,000 Leasing rate: €1,795.50 Bending length: 3,100 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness without pre-bending (mild steel): 12 mm Max. sheet thickness with pre-bending (mild steel): 8 mm Max. sheet thickness without pre-bending at D=5x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 5,310 mm Width: 1,660 mm Height: 1,590 mm Weight: 10,050 kg 4 rolls PLC Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity on all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Cone bending device Hydraulic drop-end bearing Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in accordance with CE regulations OPTIONS: Top and side sheet support NC control IMPORTANT NOTES FOR CONE ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Stanje novo Dobavni rok približno 12 tednov od naročila Država izvora Turčija Cena 7000 € Leasing obrok 135,1 € Tlačna sila 80 t Knjdpfx Asypbtvol Tjb Cilinder fiksni ali pomični: fiksni Hod 250 mm Svetla širina stojala 1040 mm Premer bata 200x120 mm Delovna hitrost 5 mm/s Hitrost vračanja 10 mm/s Dolžina 1810 mm Širina 750 mm Višina 2100 mm Teža 835 kg Jeklena varjena konstrukcija Poljubna stop pozicija Manometer za pritisk Varnostni ventil proti preobremenitvi 2 V prizmi Miza nastavljiva po višini Dvig/spust mize Upravljanje z ročico Oprema v skladu s CE predpisi Navodila za uporabo v NEMŠČINI in ANGLEŠČINI

Stanje: novo, Stanje: novo Dobavni rok: cca 8 tednov po naročilu Država porekla: Turčija Cena: 8.700 € Leasing obrok: 167,91 € Dolžina rezila: 250 mm Debelina pločevine (420 N/mm²): 6 mm Debelina pločevine (600 N/mm²): 3 mm Število hodov: 25 1/min Kot: 90° Motor: 4 kW Dolžina: 950 mm Širina: 780 mm Višina: 1115 mm Teža: 585 kg Hidravlični pogon Samodejna nastavitev reže rezanja 2 pritisna elementa 2 kotno nastavljiva prislona Zaščita iz pleksistekla Knsdpfswiqlvsx Al Tjb Nožni pedal Posoda za odpadke Oprema v skladu z direktivo "CE" Navodila za uporabo v nemščini in angleščini

Stanje: novo, Stanje: novo Dobavni rok: približno 10 tednov po oddaji naročila Država izvora: Turčija Cena: 16.100 € Leasing obrok: 309,12 € Tlačna moč: 100 t Cilinder: fiksen ali pomičen – fiksen Hod: 300 mm Kodpfxowiql As Al Tjnb Vgradna višina: 680 mm Svetla razdalja med stojali: 1.020 mm Hitri premik: 8 mm/s Delovna hitrost: 5 mm/s Povratna hitrost: 10 mm/s Miza: 500 x 1.020 mm Prebojna odprtina v mizi: 100 mm Razdalja lukenj: 190 mm Dolžina: 2.110 mm Širina: 1.000 mm Višina: 2.350 mm Teža: 1.985 kg 2 vodili Batna plošča z utori v obliki črke T Miza z utori v obliki črke T Manometer Hitri premik z avtomatskim preklopom na delovno hitrost Globina stiskanja nastavljiva s pomočjo kamere Dvoroka upravljanje in nožno stikalo Miza nastavljiva po višini Oprema v skladu s CE predpisi Navodila za uporabo v NEMŠČINI in ANGLEŠČINI

Stanje: novo, Leto izdelave: 2024, Stanje: novo Leto izdelave: 2024 Inventarna številka: 7321 Dobavni rok: takoj, vmesna prodaja mogoča Država izvora: Turčija Cena: 12.500 € Leasing obrok: 216,96 € Na zalogi: 1 Akcijska cena: 11.300 € Tlačna sila: 150 t Knedpfx Ajwiqp Usl Tob Valj: fiksen ali vodoravno premičen Hod: 300 mm Svetla stojna širina: 1.570 mm Premer bata: 280×200 mm Delovna hitrost: 5 mm/s Povratna hitrost: 10 mm/s Dolžina: 2.630 mm Širina: 1.000 mm Višina: 2.480 mm Teža: 2.100 kg S horizontalno premičnim valjem z vpenjalno ročico Jeklena varjena konstrukcija Poljubna pozicija zaustavitve Merilnik tlaka Varnostni ventil proti preobremenitvi 2 V prizmi Višinsko nastavljiva miza Miza z dvižno-spuščalno napravo Krmiljenje z upravljalno ročico Oprema v skladu s CE predpisi Navodila za obratovanje v NEMŠČINI in ANGLEŠČINI

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €59,600 Lease rate: €1,126.44 Cutting length: 3,100 mm Max. sheet thickness - mild steel: 10 mm Max. sheet thickness - stainless steel: 6 mm Stanchion throat: 50 mm Strokes per minute: 13 Cutting angle: 1.5° Number of hold-downs: 16 Knjdpfjwiqxcsx Al Tsb Hold-down pressure: 22 tons Backgauge: 1,000 mm Backgauge speed: 200 mm/s Motor power: 22 kW Oil tank: 200 l Support arms: 2 pcs. Table height: 865 mm Table width: 580 mm Table length: 3,515 mm Machine length: 4,200 mm Machine width: 2,250 mm Total width with support arm and rear safety guard: 3,600 mm Height: 2,100 mm Weight: 9,300 kg Swing-cut execution NC preselection control D-Touch 7 with touchscreen for backgauge, cutting length, piece count, USB connection Motorized backgauge up to 1,000 mm on ball screws, foldable Clear operator panel mounted on swivel arm Hydraulic hold-downs arranged close to the cutting edge Foot switch Central manual blade gap adjustment Cutting line illumination Wide support table with roller balls Piece counter Single and continuous stroke mode Foldable finger guard 1,000 mm 1 side gauge 1,500 mm with scale, T-slot and cam lock 2 sheet support arms 1,000 mm with T-slot Easy replacement and regrinding of cutting blades Adjustable cutting length for cost-effective operation Lower blade reversible on 4 sides Upper blade reversible on 2 sides Oil filling Light barriers at the rear of the machine Qualified customer service Operating manual in GERMAN and ENGLISH Equipment in accordance with CE directives WE HAVE MORE THAN 850 REFERENCES!

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €11,800 Leasing rate: €226.56 Shaft diameter: 60 mm Upper roll diameter: 215 mm Knedewiq S Nopfx Al Tjb Lower roll diameter: 215 mm Driven rolls: 3 Motor power: 1.5 kW Speed: 4 m/min Flat bar upright (section / min. diameter): 80x20 mm / 1200 mm; 40x10 mm Flat bar flat (section / min. diameter): 120x25 mm / 600 mm; 50x mm Square steel (section / min. diameter): 50x50 mm / 800 mm; 20x20 mm Round steel (section / min. diameter): Ø 50 mm / 800 mm; Ø 20 mm Tube (section / min. diameter): Ø 100x2 mm / 1600 mm; Ø 6 mm Rectangular tube upright (section / min. diameter): 80x40x3 mm / 1400 mm; 40x mm Rectangular tube square (section / min. diameter): 70x3 mm / 1600 mm; 40x2 mm Angle steel, leg outside (section / min. diameter): 70x70x7 mm / 1000 mm; 40x mm Angle steel, leg inside (section / min. diameter): 70x70x7 mm / 1200 mm; 40x mm Length: 1000 mm Width: 1400 mm Height: 1650 mm Weight: 950 kg 3 driven rolls (brake motor) Hardened drive shafts Hydraulic adjustment of the top roll Hardened universal rolls Side straightening rollers in one axis, adjustable manually Usable horizontally and vertically Foot pedal for forward and reverse operation Machine and equipment conform to CE regulations Operating manual in GERMAN and ENGLISH

Stanje: novo, Stanje: novo Dobavni rok: približno 10 tednov po naročilu Država izvora: Turčija Cena: 86.300 € Leasing obrok: 1.631,07 € Tlačna sila: 150 t Hod: 300 mm Bata: 950x650 mm Miza: 1200x750 mm Vgradna višina: 550 mm Hitri pomik: 100 mm/s Delovna hitrost: 5,5 mm/s Hitrost povratka: 165 mm/s Kodswiq Tyspfx Al Tsnb Motor: 11 kW Dolžina: 2200 mm Širina: 2200 mm Višina: 3250 mm Teža: 8.200 kg 4-točkovno vodenje bata Miza in bat z T-utoroma Ročna nastavitev hoda preko krmilnega stikala Ročno in avtomatsko delovanje Svetlobne zavese Oprema v skladu s CE standardi

Stanje: novo, Stanje: novo Dobavni rok: približno 8 tednov po naročilu Država porekla: Turčija Cena: 29.460 € Leasing obrok: 562,69 € Debelina pločevine - gradbeno jeklo: 0,4 - 4 mm Največja širina pločevine: 100 mm Maksimalni presek: 400 mm² Premer podajalnih valjev: 80 mm Podajalna hitrost: 75 m/min Kjdpfx Aewiri Nsl Tsnb Podajalno pospeševanje: 10 m/s² Navor motorja: 10 Nm Stožčato cilindrični menjalnik WATTDRIVE (Izdelano v Avstriji) Pnevmatski sistem FESTO Servo pogon in krmiljenje SIEMENS 7" barvni zaslon na dotik SIEMENS 2 gnana valja Zunanji enkoder OPCIJA: Ročno kolo in Simlinx modul za daljinsko vzdrževanje: 4.290 €