Hesse By Fresan Fp 160 P nakup rabljenega (53.809)

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €97,400 Lease rate: €1,840.86 Bending length: 2,050 mm Max. bending capacity (mild steel): 30 mm Max. plate thickness without pre-bending at D=5x upper roll: 30 mm Max. plate thickness without pre-bending at D=1.5x upper roll: 25 mm Max. plate thickness with pre-bending at D=5x upper roll: 25 mm Max. plate thickness with pre-bending at D=1.5x upper roll: 20 mm Upper roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 5,000 mm Width: 2,000 mm Height: 1,900 mm Weight: 11,000 kg 4 rolls Fully hydraulic drive of upper and lower rolls Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Lhodpfoynm Enex Al Njf Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES ON CONICAL ROLLING: The max. plate thickness is 50% of the rated capacity The cone length may be a maximum of 30% or must be at least 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €53,700 Leasing rate: €1,014.93 Bending length: 2,050 mm Max. bending capacity (mild steel): 16 mm Max. sheet thickness without prebending at D=5x top roll: 16 mm Max. sheet thickness without prebending at D=1.5x top roll: 13 mm Max. sheet thickness with prebending at D=5x top roll: 13 mm Max. sheet thickness with prebending at D=1.5x top roll: 10 mm Top roll diameter: 260 mm Lower roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4,300 mm Width: 1,600 mm Height: 1,550 mm Weight: 6,100 kg 4 rolls Top roll drive via hydraulic motor and planetary gearbox, lower roll drive via gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital position display for lower and side rolls Hardened rolls Cone bending device Hydraulic relief for top roll Hydraulic drop-end bearing 2 working speeds Ledpfx Aoynm Ehjl Njhf Overload protection Mobile control panel Equipment complies with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: The max. sheet thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €111,500 Leasing rate: €2,107.35 Bending length: 3,100 mm Max. bending capacity – mild steel: 20 mm Max. plate thickness without pre-bending (D=5x top roll): 20 mm Max. plate thickness without pre-bending (D=1.5x top roll): 16 mm Max. plate thickness with pre-bending (D=5x top roll): 16 mm Max. plate thickness with pre-bending (D=1.5x top roll): 12 mm Top roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 6,000 mm Width: 2,200 mm Height: 1,900 mm Weight: 15,000 kg 4-roll design Full hydraulic drive of top and bottom rolls Hydraulic adjustment of lower and side rolls Digital readout for lower and side roll positions Hardened rolls Conical bending device Hydraulic release of the top roll Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Lhodpfx Asynm Ebjl Nsf Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The maximum plate thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €60,600 Leasing rate: €1,145.34 Bending length: 3,100 mm Max. bending capacity (mild steel): 10 mm Max. sheet thickness without pre-bending at D = 5x top roller: 10 mm Max. sheet thickness without pre-bending at D = 1.5x top roller: 8 mm Max. sheet thickness with pre-bending at D = 5x top roller: 8 mm Max. sheet thickness with pre-bending at D = 1.5x top roller: 6 mm Top roller diameter: 260 mm Bottom roller diameter: 260 mm Side roller diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 5,350 mm Width: 1,600 mm Height: 1,550 mm Weight: 7,685 kg 4 rollers Top roller driven by hydraulic motor and planetary gearbox, bottom rollers driven by gear drive and cardan shaft Hydraulic adjustment of bottom and side rollers Digital display for bottom and side roller positions Hardened rollers Cone bending device Hydraulic release of the top roller Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control console Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: Maximum sheet thickness is 50% of the rated capacity Cone length must be a maximum of 30% or more than 60% of the roller length Lhedoynm D Rjpfx Al Nof Hardened rollers are recommended

Stanje: novo, Stanje novo Dobavni rok približno 10 tednov po naročilu Država porekla Turčija Cena 6400 € Leasing obrok 123,52 € Dolžina upogibanja 1270 mm Maksimalna kapaciteta upogibanja - konstrukcijsko jeklo 2,5 mm Premer zgornjega valja 90 mm Hitrost valjanja 6 m/min Moč motorja 1,1 kW Dolžina 1850 mm Širina 700 mm Višina 1200 mm Teža 520 kg 3 valji Lsdpsynm D Dofx Al Nshf Asimetrična razporeditev valjev 2 gnana valja prek zavornega motorja Nastavljanje zadnjega valja z ročnim kolesom Pokrovčki za žice na spodnjih in zadnjih valjih Zgornji valj se da iztakniti Desni/levi tek z nožnim dvojním stikalom Naprava za valjanje stožcev Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI OPCIJA: Kaljeni valji

Stanje: novo, Stanje novo Dobavni rok približno 10 tednov od naročila Država izvora Turčija Cena 12.700 € Leasing rata 243,84 € Dolžina upogibanja 1270 mm Maks. upogibna zmogljivost – konstrukcijsko jeklo 5 mm Premer zgornjega valja 140 mm Hitrost valjanja 3,5 m/min Moč motorja 2,2 kW Dolžina 2470 mm Širina 750 mm Višina 1000 mm Lhsdpfx Aeynm Dwsl Nof Teža 1350 kg 3 valji Asimetrična razporeditev valjev – z predupogibanjem 2 pogonska valja prek zavornega motorja Ročno nastavljanje stranskih valjev Zgornji valj se nagne naprej Delovanje naprej/nazaj Konusno valjanje z nagibanjem zadnjega valja Premični upravljalni pult Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI MOŽNOSTI: Kaljeni valji Motorizirano nastavljanje stranskih valjev Digitalni prikaz položaja stranskih valjev

Stanje: novo, Stanje: novo Dobavni rok: približno 10 tednov od naročila Država porekla: Turčija Cena: 11.800 € Leasing obrok: 226,56 € Dolžina upogibanja: 1270 mm Največja zmogljivost upogibanja - konstrukcijsko jeklo: 4 mm Premer zgornjega valja: 120 mm Hitrost valjanja: 3 m/min Moč motorja: 2,2 kW Dolžina: 2470 mm Širina: 750 mm Višina: 1000 mm Teža: 1110 kg 3 valji Asimetrična razporeditev valjev - z predupogibom 2 pogonska valja z zavoro motorja Ročna nastavitev stranskih valjev Zgornji valj se lahko nagne naprej Delovanje naprej/nazaj Konično zvijanje z naklonom zadnjega valja Ljdpfx Ajynm Dqol Nshf Premični upravljalni pult Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI MOŽNOSTI: Kalupljeni (utrjeni) valji Motorizirana nastavitev stranskih valjev Digitalni prikaz položaja stranskih valjev

Stanje: novo, Stanje novo Dobavni rok približno 10 tednov od naročila Država izvora: Turčija Cena 10.000 € Leasing rata 193 € Dolžina upogibanja 1050 mm Maksimalna zmogljivost upogibanja - konstrukcijsko jeklo 4 mm Premer zgornjega valja 110 mm Moč motorja 2,2 kW Lsdpjynm Dkjfx Al Nohf Dolžina 1100 mm Širina 750 mm Višina 1000 mm Teža 990 kg 3 valji Asimetrična postavitev valjev - s pred-upogibanjem 2 pogonska valja preko zavornega motorja Ročna nastavitev stranskih valjev Zgornji valj izklopljiv naprej Tek naprej/nazaj Stožčasto zvijanje s poševno postavljeno zadnjo valjko Premično upravljalno ploščo Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI MOŽNOSTI: KALJENI valji Motorizirana nastavitev stranskih valjev Digitalni prikaz položaja stranskih valjev

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €74,800 Lease payment: €1,413.72/month Pressing force: 40 tons Bending length: 2,050 mm Axes: Y1 / Y2 / X and R axes Stroke: 200 mm Distance between uprights: 1,700 mm Throat depth (side frame): 350 mm Installation height: 440 mm Drive system: servo motor-driven spindle Rapid traverse (Y axis): 180 mm/s Working speed (Y axis): 10 mm/s Return speed (Y axis): 115 mm/s Backgauge travel range (X axis): 650 mm Backgauge travel range (R axis): 250 mm Table height: 1,000 mm Motor power: 7.2 kW Length: 2,600 mm Width: 1,450 mm Height: 2,650 mm Weight: 4,400 kg Lsdpfoynm A Hox Al Nohf STANDARD EQUIPMENT: - Servo-driven spindle drive - 4 axes (Y1, Y2, X, and R) - Color graphics controller DELEM DA-66S • 17" color touchscreen • 3D visualization in simulation and production • Suitable for full Windows applications • Compatible with Delem Modusys • USB and peripheral interface • User-specific application support • Sensor, bending, and correction interface - Servo-driven backgauge on linear guides and recirculating ball screws - CNC-controlled crowning - Upper tool 1010/A/75°, segmented and gooseneck - 4-way die block 60x60 2009 (V=16, 22, 35, and 50 mm) - Laser safety device Fiessler AKAS mounted on upper beam - Sheet support arms on linear guides - Equipment according to CE regulations - Operating instructions in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Higher productivity than conventional hydraulic press brakes due to virtually delay-free response to foot pedal signal - Low energy consumption - Compact spindle drive unit with a low number of individual components - No hydraulic components Options: - Z1/Z2 axes - CNC controller DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability - Quick clamping lever for upper tool

Stanje: novo, Condition new Delivery time approx. 12 - 14 weeks from order Country of origin Turkey Lhsdpfx Asynm Ayol Nof Price €72,300 Leasing rate €1,366.47 Press force 40 t Bending length 1250 mm Axes Y1 / Y2 / X and R axis Stroke 200 mm Distance between uprights 1050 mm Throat depth (side frame) 250 mm Installation height 440 mm Drive concept: servo spindle drive Rapid traverse Y-axis 115 mm/s Working speed Y-axis 10 mm/s Return speed Y-axis 115 mm/s Backgauge travel X-axis 650 mm Backgauge travel R-axis 250 mm Table height 1000 mm Motor output 7.2 kW Length 1950 mm Width 1450 mm Height 2650 mm Weight 3600 kg STANDARD EQUIPMENT: - Servo-driven spindle drive - 4 axes (Y1, Y2, X and R) - Color graphic control DELEM DA-66S - 17" color touchscreen - 3D visualization in simulation and production - Suitable for full Windows applications - Compatible with DelemModusys - USB and peripheral interface - Custom application support - Sensor, bending, and correction interface - Servo-driven backgauge with linear guides and recirculating ball screws - CNC-controlled crowning - Upper tool 1010/A/75°, segmented and goosenecked - 4-way bottom die block 60x60 2009 (V= 16, 22, 35, and 50 mm) - Laser safety device Fiessler AKAS, mounted on upper beam - Sheet support arms on linear guides - Equipment complies with CE regulations - Operating instructions in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Higher productivity compared to traditional hydraulic press brakes due to almost delay-free response to the foot pedal signal - Lower energy consumption - Compact drive spindle unit with a low number of components - No hydraulic components Options: - Z1/Z2 axes - CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability - Quick-release clamping lever for the upper tool

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €127,400 Leasing rate: €2,407.86 Pressing force: 220 tons Bending length: 4050 mm Axes: Y1 / Y2 / X and R axis Stroke: 265 mm Distance between uprights: 3600 mm Throat depth: 410 mm Installation height: 530 mm Drive concept: hydraulic Rapid traverse Y-axis: 200 mm/s Working speed Y-axis: 12 mm/s Return speed Y-axis: 180 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Length: 5250 mm Width: 1770 mm Height: 2900 mm Weight: 15,000 kg ONE SERVO MOTOR AND PUMP PER CYLINDER Standard equipment: - 4 axes (Y1, Y2, X, and R) - CNC control unit SKY 22 - Full HD graphic display 21.5” with 2D and 3D representation of the programed workpiece - Intuitive touchscreen operation (easy drawing of the bending contour with finger) - User-friendly dialog programming, selectable in 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of flat length for sheet cutting - Automatic calculation of bending sequences - Graphic product and tool memory - Correction option - USB ports and Ethernet connection for import, backup, and program export - Windows operating system - Import support for IGES, STEP, and DXF files - Servo-driven backgauge on linear guides and recirculating ball screws - Backgauge finger blocks on double linear guides - CNC-controlled crowning - Top tool 1010/A/75°, segmented and offset Lhedoynm Amepfx Al Nsf - 4-V die block 60x60 2009 (V = 16, 22, 35, and 50 mm) - Laser safety device Fiessler AKAS mounted on the upper beam - Sheet support arms on linear guides - Equipment complies with CE regulations - Oil filling - Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - The hydraulics run only during upper beam movement - Low energy consumption - Low noise emissions - High speed Options: - Z1/Z2 axes - CNC control Delem DA-66 S - CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability - Quick-clamping lever for the upper tool

Stanje: novo, Stanje: novo Dobavni rok: pribl. 10 tednov od naročila Lhsdpfx Aleynmzvo Njf Država izvora: Turčija Cena: 12.900 € Leasing obrok: 247,68 € Dolžina upogibanja: 1550 mm Maks. zmogljivost upogibanja - konstrukcijsko jeklo: 3 mm Premer zgornjega valja: 110 mm Hitrost valjanja: 3 m/min Moč motorja: 2,2 kW Dolžina: 2700 mm Širina: 750 mm Višina: 1000 mm Teža: 1200 kg 3 valji Asimetrična razporeditev valjev - z predhodnim upogibanjem 2 gnana valja preko zavornega motorja ročno nastavljanje stranskih valjev zgornji valj pregiben naprej Tek naprej/nazaj Konusno valjanje s poševno nastavitvijo zadnjega valja Premična upravljalna konzola Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI MOŽNOSTI: kaljeni valji motorizirano nastavljanje stranskih valjev digitalni prikaz položaja stranskih valjev

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €32,480 Leasing rate: €620.37 Bending length: 1,550 mm Max. bending capacity - structural steel: 9 mm Max. plate thickness without pre-bending at D=5x upper roll: 9 mm Max. plate thickness without pre-bending at D=1.5x upper roll: 7 mm Max. plate thickness with pre-bending at D=5x upper roll: 7 mm Max. plate thickness with pre-bending at D=1.5x upper roll: 5 mm Upper roll diameter: 180 mm Lower roll diameter: 180 mm Side roll diameter: 150 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Lodpfxeynmzpj Al Nohf Weight: 3,250 kg 4 rolls Top roll drive by hydraulic motor and planetary gearbox, lower roll drive via gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The maximum plate thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Zustand neu Lieferzeit ca. 4 Monate ab Auftragserteilung Ursprungsland Türkei Preis 61.300 € Leasingrate 1.158,57 € Sägerahmen: Doppelsäulenführung Sägebandabmessungen: 6.000 x 41 x 1,3 mm Bandgeschwindigkeit: stufenlos 20 - 100 m/min Schnittleistung 0° rund: 560 mm Schnittleistung 0° quadratisch: 560 mm Schnittleistung 0° flach: 600 x 560 mm Arbeitshöhe: 810 mm Hydraulikmotor: 2,2 kW Hauptmotor: 5,5 kW Kühlmittelpumpenmotor: 0,12 kW Maße (L x B x H): 3.250 x 2.200 x 2.350 mm Gewicht: 4.500 kg Hydromechanische Bandspannung Stufenlose Bandgeschwindigkeit (Inverter) Linearführung Zufuhr-Spannstock mit Servoantrieb, 700 mm Hub bzw. 9.999 mm bei Multihub Bedienpult mit Touchscreen (50 Schnittlängen / 30 Programme) Planetengetriebe Sägedruckeinstellung Bandabweichungssensor Kühlmitteleinrichtung Spänebürste Lhedpfoynmy Sjx Al Njf Optische Höheneinstellung OPTIONEN: - Hydraulische obere Klemmung - Mindermengenschmierung - Rollenbahn 3 m - Laser-Schnittlinie

Stanje: rabljeno, Leto izdelave: 2004, Stanje rabljeno Leto izdelave 2004 Ljdpfx Aljynmyro Nshf Številka skladišča 9726 Dobavni rok takoj, vmesna prodaja mogoča Država izvora Turčija Cena 6750 € Na zalogi 1 Dolžina reza 1350 mm Maks. debelina pločevine - konstrukcijsko jeklo 3 mm Število hodov 35 1/min Kot reza 1,5° Zadnji omejevalnik 550 mm Moč motorja 3 kW Nastavljiva roka za podpiranje 2 kosa Višina mize 850 mm Širina mize 400 mm Dolžina 1700 mm Širina 1350 mm Višina 1200 mm Teža 950 kg Ročno nastavljiv zadnji omejevalnik Avtomatsko delujoč pritrdilni element Pritrdilni element z gumijastimi blazinicami Premični nožni pedal Stranski omejevalnik 2 kosa roki za polaganje pločevine Navodila za uporabo v NEMŠČINI Ne ustreza nemški UVV in avstrijski AMVO

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €73,200 Leasing rate: €1,383.48 Bending length: 2,050 mm Max. bending capacity – mild steel: 20 mm Max. sheet thickness without prebending at D=5x upper roll: 20 mm Max. sheet thickness without prebending at D=1.5x upper roll: 16 mm Max. sheet thickness with prebending at D=5x upper roll: 16 mm Max. sheet thickness with prebending at D=1.5x upper roll: 12 mm Upper roll diameter: 280 mm Lower roll diameter: 280 mm Side roll diameter: 220 mm Rolling speed: 1.5 / 5 m/min Motor power: 16.5 kW Length: 4,350 mm Width: 1,700 mm Height: 1,850 mm Weight: 8,550 kg 4 rolls Fully hydraulic drive for upper and lower rolls Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic release of upper roll Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Ledjynmylopfx Al Njhf Mobile control panel Equipment according to CE regulations OPTIONS (PRICES ON REQUEST): Steplessly variable rolling speed Hydraulic side support Hydraulic top support NC control system IMPORTANT NOTES ON CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €40,900 Leasing rate: €781.19 Bending length: 2050 mm Max. bending capacity – mild steel: 10 mm Max. plate thickness without pre-bending (at D = 5x top roll): 10 mm Max. plate thickness without pre-bending (at D = 1.5x top roll): 8 mm Max. plate thickness with pre-bending (at D = 5x top roll): 8 mm Max. plate thickness with pre-bending (at D = 1.5x top roll): 6 mm Top roll diameter: 200 – 220 mm Lower roll diameter: 200 – 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4400 mm Width: 1150 mm Height: 1250 mm Weight: 3950 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, lower roll driven by gears and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control Lodpoynmyfjfx Al Nohf IMPORTANT POINTS FOR CONE BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length may be a maximum of 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €43,550 Leasing rate: €831.81 Bending length: 1,550 mm Max. bending capacity – mild steel: 12 mm Max. sheet thickness without pre-bending at D=5x top roller: 12 mm Max. sheet thickness without pre-bending at D=1.5x top roller: 10 mm Max. sheet thickness with pre-bending at D=5x top rollers: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roller: 8 mm Top roller diameter: 220 mm Lower roller diameter: 200 mm Side roller diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,600 kg 4-roll design Top roll driven by hydromotor and planetary gearbox, lower roll driven by gear and cardan shaft Ljdsynmx Iepfx Al Nshf Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll lifting Hydraulic drop-end bearing 2 working speeds Overload protection Movable control panel Equipment according to CE regulations OPTIONS: Infinitely variable roll speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL ROLLING: Max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 14 – 16 weeks from order Country of origin: Turkey Price: €252,800 Press force: 600 tons Bending length: 4,050 mm Axes: Y1 / Y2 / X and R axis Stroke: 365 mm Distance between uprights: 3,100 mm Frame gap clearance: 410 mm Installation height: 700 mm Drive concept: hydraulic Rapid traverse Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 160 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 154 mm Oil tank: 280 l Length: 5,750 mm Width: 2,500 mm Height: 4,000 mm Weight: 40,500 kg ONE SERVO MOTOR AND PUMP PER CYLINDER 4 Axes (Y1, Y2, X and R) CNC CONTROL SKY 22 Lhsdpfx Asynmxnjl Nef - Full HD graphics display 21.5" with 2D and 3D visualization of the programmed workpiece - Intuitive touch-screen operation (easy drawing of bend contours using your finger) - User-friendly dialog programming, selectable in 2D or 3D mode - 2D and 3D bending process simulation - Automatic tool selection in 3D mode - Automatic calculation of flat length for sheet metal cutting - Automatic calculation of bending sequence - Graphical product and tool storage - Correction capability - USB ports and Ethernet connection for import, backup, and program export - Windows operating system - Import support for IGES, STEP, DXF files Servo-motor driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Upper tool 1010/A/75°, segmented and offset 4-V die block 60x60 2009 (V= 16, 22, 35, and 50 mm) Fiessler AKAS laser safety device mounted on upper beam Sheet support arms on linear guides Equipment according to CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Hydraulics run only during upper beam movement - Low energy consumption - Reduced noise emission - High speed PRICE FCA TURKEY Options: CNC control Delem DA-66 S CNC control Delem DA-69S 3D including PC software Profile-S with 3D file import capability

Stanje: novo, Stanje novo Dobavni rok približno 4–6 mesecev od naročila Država izvora Turčija Cena 12.200 € Leasing rata 234,24 € Žagalni okvir z nagibnim okvirjem Dimenzije žagalnega traku 3660x27x0,9 mm Lsdpfx Asynmxhel Njhf Hitrost traku brezstopenjska 20–100 m/min Zmogljivost reza 0° okroglo 320 mm Zmogljivost reza 0° kvadratno 300 mm Zmogljivost reza 0° ploščato 320x300 mm Delovna višina 640 mm Hidravlični motor 0,37 kW Motor 2 kW Motor črpalke hladilne tekočine 0,12 kW Dolžina 1900 mm Širina 850 mm Višina 1300 mm Teža 770 kg Podajalnik z valji z enkoderjem in NC krmiljenjem Krtača za ostružke Upravljalna plošča Nastavitev višine s trakom z mejno stikalo Hidromehanska napetost traku Hidravlično vpenjalo Črpalka hladilne tekočine Žagalni trak Varnostno stikalo 1,2 metra valjčna proga Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI

Stanje: novo, Leto izdelave: 2023, Stanje: novo Leto izdelave: 2023 Številka zaloge: 8286 Dobavni rok: takoj, možna vmesna prodaja Država porekla: Turčija Cena: 2990 € Ljdpoynmxbjfx Al Nshf Na zalogi: 1 Dolžina upogibanja: 2040 mm Debelina pločevine (420 N/mm²): 0,8 mm Maks. kot upogiba: 70° Dolžina: 2400 mm Širina: 750 mm Višina: 850 mm Teža: 290 kg Neprekinjena ravna zgornja tirnica Na kolesih Ročni rezalni aparat

Stanje: novo, Zustand neu Lieferzeit ca. 12 Wochen ab Auftrag Ursprungsland Türkei Preis 22.300 € Leasingrate 428,16 € Lhedpfoynmwdox Al Nsf Biegelänge 1.550 mm Max. Biegekapazität – Baustahl: 4,5 mm Max. Blechstärke ohne Anbiegung – Baustahl: 4,5 mm Max. Blechstärke mit Anbiegung – Baustahl: 3,5 mm Max. Blechstärke ohne Anbiegung bei D=5x Oberwalze: 4,5 mm Max. Blechstärke ohne Anbiegung bei D=1,5x Oberwalze: 3,5 mm Max. Blechstärke mit Anbiegung bei D=5x Oberwalze: 3,5 mm Max. Blechstärke mit Anbiegung bei D=1,5x Oberwalze: 2,5 mm Oberwalzendurchmesser: 130 mm Unterwalzendurchmesser: 130 mm Seitenwalzendurchmesser: 130 mm Rollgeschwindigkeit: 5 m/min Länge: 3.300 mm Breite: 1.150 mm Höhe: 1.110 mm Gewicht: 2.370 kg Motorischer Walzenantrieb Ober- und Unterwalze angetrieben Hydraulische Seitenwalzenzustellung 3 Digitalanzeigen Hydraulische Abklapplager Gehärtete Walzen Konischbiegevorrichtung Betriebsanleitung in DEUTSCH oder ENGLISCH OPTIONEN: Topsupport Seitensupport Variable Geschwindigkeit NC Steuerung

Stanje: novo, Stanje: novo Dobavni rok: približno 12 tednov od naročila Država izvora: Turčija Cena: 16.000 € Leasing rata: 307,2 € Dolžina upogibanja: 2050 mm Ledeynmv Topfx Al Nehf Maks. zmogljivost upogibanja (konstrukcijsko jeklo): 4 mm Premer zgornjega valja: 140 mm Moč motorja: 2,2 kW Dolžina: 3200 mm Širina: 750 mm Višina: 1000 mm Teža: 1650 kg 3 valji Asimetrična razporeditev valjev – z predupogibanjem 2 pogonska valja preko zavornega motorja Ročna nastavitev stranskih valjev Zgornji valj se lahko izmenično nagne naprej Obratovanje naprej/nazaj Konusno valjanje s poševno nastavitvijo zadnjih valjev Premična upravljalna konzola MOŽNOSTI: Kaljeni valji Motorizirana nastavitev stranskih valjev Digitalni prikaz položaja stranskih valjev (Simb. fotografija)

Stanje: novo, Leto izdelave: 2026, Stanje novo Leto izdelave 2026 Lhsdpfx Alewirt Uj Nof Številka skladišča 070179 Dobavni rok takoj, vmesna prodaja možna Država porekla Turčija Cena 19.900 € Leasing rata 382,08 € Na zalogi 1 Tlačna sila 150 t Cilinder fiksni ali pomični fiksni Hod 300 mm Vgradna višina 610 mm Svetla stojalna širina 1020 mm Hitrost hitrosti 9 mm/s Delovna hitrost 5 mm/s Hitrost povratka 10 mm/s Miza 600x1020 mm Prehodna odprtina na mizi 100 mm Razmak lukenj 190 mm Dolžina 2110 mm Širina 1000 mm Višina 2470 mm Teža 2450 kg 2 vodili Batna plošča z T-utori Miza z T-utori Manometer Hitra pot do samodejnega preklopa na delovno hitrost Globina stiskanja nastavljiva s pomočjo ekscentra DVO-ROČNA KONTROLA IN NOŽNI PEDAL Miza po višini nastavljiva Oprema v skladu s CE predpisi Navodila za uporabo v NEMŠČINI in ANGLEŠČINI

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €51,600 Leasing rate: €975.24 Cutting length: 3080 mm Max. sheet thickness – mild steel: 6 mm Max. sheet thickness – stainless steel: 4 mm Side frame throat depth: 350 mm Strokes per minute: 20 1/min Cutting angle: 0.5 – 2° Number of hold-downs: 16 Hold-down pressure: 20 t Backgauge travel: 1000 mm Backgauge speed: 200 mm/s Motor power: 11 kW Oil tank: 125 l Support arms: 3 pcs. Table height: 820 mm Table width: 494 mm Table length: 3280 mm Ledpfowirwtex Al Njhf Machine length: 4100 mm Machine width: 2050 mm Overall width with support arms and rear safety guard: 3650 mm Height: 1950 mm Weight: 7980 kg Guillotine design CNC touchscreen control D-touch 7 for backgauge, cutting angle, blade gap, cutting length, piece counter USB connection Cutting line illumination Foldable ball screw for backgauge Balls in table Foldable finger guard, 1,000 mm Side gauge with T-slots, tilting stop, and scale 3 support arms with T-slots Oil fill Light barriers at machine rear Operating manual in GERMAN and ENGLISH