Henkes Industries Gmbh Obrat Za Peletiranje nakup rabljenega (127.944)

Stanje: rabljeno, Maksimalna sila stiskanja: 3.150 kN Število hodov na minuto: 15–80 Nastavljiva višina bata: 10 mm Hedezwf Tnspfx Aqtst Hod: 200 mm Napetost: 400 V Moč motorja: 30 kW Priključna moč (skupna moč): 65 kW Teža: pribl. 17.000 kg Varnostna razdalja za delo z obema rokama: 198 ms

Stanje: rabljeno, Leto izdelave: 1991, Allis Chalmer 60 109 M-II Primary Gyratory Crusher Hsdpfsvg A Raox Aqtjt 2 complete units, feed opening: 1,500 mm (60 inch), mantle diameter: 2,725 mm (109 inch), discharge size: 175 to 250 mm (7 to 10 inch), throughput: approx. 4,700 to 6,400 t/h, without electric motor (required drive power 750 kW), including one hydraulic hammer per unit. Total weight: approx. 570 t per unit.

Stanje: novo, Leto izdelave: 2025, moč: 5 kW (6,80 KM), SAPI Premium Pressure Blast Apparatus, 200 liters, with cyclone separator and abrasive vacuum for abrasive media processing. This blasting system offers a cost-effective, highly efficient, and effective solution for open blasting operations with semi-automatic abrasive recycling. Open blasting system for manual sandblasting of various types of workpieces by an operator, including abrasive media processing. The abrasive media is collected by hand after blasting and pushed into the collection hopper at the bottom. The abrasive vacuum extracts the media from the hopper and draws it through the cyclone separator. During this process, dust is extracted and collected in the vacuum's dust container. Coarse particles are separated out via a screen. The cleaned abrasive falls back into the vented pressure blasting vessel and is available for reuse. Our SAPI safety shut-off ensures a safe and economical blasting process. The remote control enables starting and stopping of the blast vessel with a hand lever mounted on the blasting hose assembly. This is a very economical and effective solution for open blasting operations with semi-automatic abrasive recycling. Scope of delivery includes: - SAPI Premium Blast Vessel, 200 liters with 1 1/4" piping, pressure-regulated from 0.1 – 12 bar, max. operating pressure 12 bar - High-performance water separator 1 1/4", permanently mounted on the device - SAPI safety shut-off - Cyclone separator for abrasive processing with lifting device - Abrasive media sieve (insert sieve in blast vessel hopper) - Loading hopper 500x500x380 mm Hjdpfxjwc Rcno Aqtot - 4-meter connecting hose from loading hopper to cyclone separator - 3-meter connecting hose from cyclone separator to abrasive vacuum - Abrasive vacuum, 5.5 kW, 400 V, 50 Hz, with 70-liter dust container - 10 m blast hose assembly 25x7 mm, fully assembled with nozzle holder, hand lever, control cable, and blast hose coupling - Boron carbide venturi long nozzle (optional diameters: 6 mm, 8 mm, or 10 mm)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 5.800 kg, skupna dolžina: 5.000 mm, skupna širina: 1.250 mm, skupna višina: 650 mm, Leto izdelave: 2025, dolžina vilic: 5.000 mm, nosilnost: 5.000 kg, Transport dolly 1250 x 5000 mm with payload capacity of 5000 kg Hjdpfjv Hnnkox Aqtst Tyres: Solid rubber bandage wheels Steering: Turntable with fork tine receptacle Optional side stanchions Support legs at the front for parking the dolly

Stanje: rabljeno, Technical details: Hjdpfxewiu Sms Aqtst Weight: approx. 80 kg Machine dimensions (LxWxH): approx. 0.77 x 0.45 x 0.5 m BRUSHING MACHINE for deburring / brushing pipe ends / welded profile tubes / pipe bodies on the face side

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 100 h, 5 pieces: • Gravimetric screw feeder • Feed hopper with pneumatic rotary valve, each with cover • Screw conveyor from Big Bag unloading, each with height-adjustable individual frame 1 piece: • Trough screw conveyor for combining and conveying the dosing materials into a transfer container 5 pieces: • Big Bag discharge station with suspension crossbeam that prevents the Big Bag from collapsing during emptying • Big Bag base plate with discharge aid (vibration drive) Hodpfxjt S Rdus Aqtjt Option not included in the price: Control cabinet incl. control system Delivery: EXW

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Grinding Wheel Dressing Machine: Easy to operate, robust, and precise Hedpfsubbrtox Aqtst Our grinding wheel dressing machine with enclosure offers you an unbeatable combination of user-friendly operation and exceptional stability. The solid granite bed ensures maximum precision and durability, while the intuitive controls optimize efficiency in your workshop. While you continue production on your tool grinding machine, our dressing machine saves you both time and money. Ideal for anyone who values reliable performance and outstanding value for money!

Stanje: novo, Leto izdelave: 2025, pritisk: 12 letvica, Innovative dust-free sandblasting machines combine the performance of conventional sandblasting with a vacuum system that captures all dust and removed materials during operation. This eliminates not only the need for extensive cleaning, but also protects the operator and those nearby from the harmful effects of airborne particles. With a dust-free sandblasting machine, you can carry out cleaning and surface preparation faster and more efficiently. Thanks to intuitive controls and user-friendly design, these machines are also easy to operate for sandblasting beginners. ✅ PR 50 Dust-free sandblasting machine With its versatile range of applications, the PR 50 can process a wide variety of surfaces, from hard metal to delicate glass. Our PR 50 is an excellent choice for anyone working in the automotive, construction, or cleaning industries, to name just a few. Thanks to its compact size and convenient design, it is easy to operate and transport—even for those new to sandblasting. Hedpfeupzn Eex Aqtst

Stanje: rabljeno, Leto izdelave: 1994, Technical details: Welding current (stepless): 40...400 A Length: 900 mm Height: 1200 mm Total power requirement: 13.8 kVA Machine weight approx.: 180 kg Space requirement approx.: W:0.6xL:0.9xH:1.2 m MIG MAG WELDING MACHINE – Welding rectifier for use as a spare parts donor - Power range: 40A/15V to 400A/34V - Open-circuit voltage: 58V - Characteristic: Constant - Protection class: IP 23 Hedpfx Aqou Nwx Uetot - Insulation class: F - Water cooling Control board A5 missing

Stanje: rabljeno, Leto izdelave: 2003, Crushes bottles by pressing them. - High crushing capacity - Significant volume reduction - Accident-proof (shatter-protected) - Low noise emission [85/87 dB(A)] - Low wear rate - Compact design (minimal space requirements) Machine (additional info): Bottle Crushing Plant Conti Crushing capacity: 6,000 bottles/hour with feed conveyor Current: 6.5 A Hjdjvcqhxspfx Aqtet Voltage: 380V Frequency: 50Hz Length: 1,520 mm Width: 1,300 mm Height: 2,600 mm Base construction: On domed feet Equipment: Cullet collection tray, noise protection enclosure, feed chute for manual disposal of individual bottles Weight: 700 kg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, This UV printer replaces conventional laser printers – it also enables color printing on glass, wood, textiles, plastic, metal, and many other materials. New Model: PS-UV4060 Max Volume For large items with high media clearance Printhead: Epson TX800 (CMYK + WW / 6 channels) 720x1080 / 720x1440 / 720x2160 dpi Software for printer and image editing included Weight: 90 kg Operator control display Table movement via leadscrew technology 360-degree application available on request: for large cylindrical bottles and items A2 format: 45x65 cm and 40 cm print height Printer dimensions: 107x106x102 cm Hsdpfx Aqjfvx U Hstjt Water circulation cooling system Software installation and printer training available upon request. Across Germany and Europe.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, This UV printer replaces conventional laser printers – and can also produce color prints on glass, wood, textiles, plastic, metal, and many other materials. New model: PS-UV4060 Max Pro Dual print head machine with 2x CMYK + 4x White Speed monster!! Print head: 2x Epson TX800 (CMYK + CMYK + WWWW / 12 channels) Resolutions: 720x1080 / 720x1440 / 720x2160 dpi Includes software for printing and image editing Weight: 95 kg User interface display Table movement via screw drive 360-degree printing possible on request: for large round bottles and objects A2 format 45x65 cm and 20 cm print height Printer dimensions: 920x940x570 mm Water circulation cooling system Hsdpfx Aqjfvx U Uetjt Software setup and printer introduction available upon request. Germany/Europe-wide.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0684, lastna masa: 4.000 kg, največja dovoljena obremenitev: 40.000 kg, skupna masa: 44.000 kg, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 780 mm, velikost pnevmatike: 405x260, stanje pnevmatik: 100 odstotek, Leto izdelave: 2026, Transportni voziček TPW 40 AL-PA-AW Tip: TPW 40 AL-PA-AW Serijska št.: 0800 Leto izdelave: 2026 Nosilnost: 40.000 kg na 60 % nakladalne površine pri 6 km/h Dimenzije: Dolžina nakladalne površine: 4000 mm Širina: 2200 mm Višina: cca 760 mm Hjdsfxgxnopfx Aqtet Krmiljenje: vsa kolesa krmiljena – nihajna os – osna gugalnica Oprema pnevmatik: 16 koles za težke tovore 405-260 Vlečna oje: dolžina vlečne oje 1800 mm z varovalom proti zdrsu in vlečno zanko po DIN za zatič 40 mm Barvanje: RAL 2000 Transportno dno: 50 mm duglazija-macesen, ugreznjeno pritrjeno v okvir #Težki transport #Notranji transportni sistemi #Prikolica za težke tovore 6-100 ton #Prikolica za težke tovore od 3 do 100 ton #Platformni voziček za težke tovore #Platforma za težke tovore #Krmiljenje vseh koles #Transportni voziček

Leto izdelave: 2006, stanje: zelo dobro (rabljeno), Stroj je bil odstranjen iz rednega obratovanja in shranjen. Poleg tega je bil uporabljen kot rezervna kapaciteta, zato je bil malo uporabljan. Stroj se prodaja skupaj z nekaj rezervnimi deli, kot sta motor in menjalnik. Hodpfjncbtbjx Aqtot

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 6.0 mm Cutting width: 3,200 mm Total power requirement: 7.5 kW Weight approx.: 8,500 kg Dimensions (LxWxH): 4,650 x 1,700 x 1,800 mm Technical data: Sheet thickness: 6 mm Cutting length: 4,200 mm Cutting angle: 1.50° Backgauge: motorized, 1,000 mm Motor power: 7.5 kW Length: 4,650 mm Width: 1,700 mm Height: 1,800 mm Weight: 8,500 kg Equipment: Swing cut system NC preset control ELGO P 40 T Touch with backgauge and cutting gap adjustment from the front via the control system Motorized backgauge up to 1,000 mm Clear control panel mounted on swivel arm Hydraulic hold-downs arranged close to the cutting edge Foot switch Cutting gap adjustment Cutting line illumination Wide support table with ball transfers Foldable finger guard 1,000 mm 1 side stop with T-slot Hsdpfxed Ab Hhs Aqtet 2 sheet support arms with T-slot Easy replacement and regrinding of blades Adjustable cutting length for efficient processing Lower blade with four cutting edges, reversible Upper blade with two cutting edges, reversible Qualified customer service Operating instructions in ENGLISH Machine and equipment in accordance with CE regulations

Stanje: novo, Sheet length: 4,200 mm Sheet thickness: 13.0 mm Cutting width: 4,200 mm Total power requirement: 18.5 kW Weight approx.: 13,800 kg Dimensions (LxWxH): 4,650 x 2,270 x 2,000 mm Technical Specifications: Sheet thickness: 13 mm Cutting length: 4,200 mm Cutting angle: 1.80° Back gauge: motorized, 1,000 mm Motor power: 18.5 kW Length: 4,800 mm Width: 1,270 mm Height: 2,000 mm Weight: 13,800 kg Features and Equipment: Swing cut design NC pre-selection control ELGO P 40 T Touch with back gauge and cutting gap adjustment operated from the control panel motorized back gauge up to 1,000 mm clearly arranged control panel mounted on swivel arm hydraulic hold-downs arranged close to the cutting edge Hodsd Ab Hiopfx Aqtot foot switch cutting gap adjustment cutting line illumination wide support table with ball rollers foldable finger guard, 1,000 mm 1 side gauge with T-slot 2 sheet support arms with T-slot easy blade changing and regrinding adjustable cutting length for efficient processing bottom blade usable 4 times (quadruple rotating) top blade usable 2 times (reversible) qualified customer service Operating manual in ENGLISH Machine and equipment comply with CE regulations

Stanje: novo, Shaft diameter: 180 mm Upper roll diameter: 60 mm Lower roll diameter: 50 mm Working speed: 5 m/min Motor power: 3 kW Length: 1200 mm Width: 850 mm Height: 1200 mm Approx. weight: 1000 kg Technical Data: - Welded steel frame construction - 3 driven rolls - Hardened and ground shafts made from high-strength special steel - Rolls are hardened and ground - Horizontal and vertical working positions - Hardened standard rolls - Mobile control panel Hsdpfx Aod Ab H Noqtjt - Angle side guide rollers - Equipped with brake motor for precision bending - Digital displays (2 units) Options: - STANDARD digital display - NC unit, 7" screen, EURO 9,000 HPK 50 File Type Size Min. Dia Notes 1 60x10 20x5 500 250 Standard Rolls 2 80x20 50x5 500 250 Standard Rolls 3 32x32 12x12 400 250 Standard Rolls 4 Ø35 Ø10 350 250 Optional Rolls 5 Ø60x2 Ø15x1.5 600 200 Optional Rolls 6 2”x3.9 1/2”x2.7 400 200 Optional Rolls 7 50x25x3 20x15x2 450 250 Optional Rolls 8 45x3 20x2 600 300 Optional Rolls 9 60x60x6 30x30x4 650 350 Optional Rolls 10 50x50x5 30x30x4 550 350 Optional Rolls 11 60x7 20x3 550 250 Standard Rolls 12 50x6 20x3 500 250 Standard Rolls 13 60x7 20x3 500 250 Standard Rolls 14 UPN 80 UPN 30 600 250 Optional Rolls* 15 UPN 65 UPN 30 600 250 Standard Rolls* * Special washer (spacer) may be required / Only with special beam bending attachment • Capacities specified for 260 N/mm² plate yield strength

Stanje: novo, Shaft diameter: 60 mm Upper roll diameter: 215 mm Lower roll diameter: 215 mm High-performance hydraulics: 16 l/min Working speed: 4 m/min Motor power: 1.5 kW Length: 1000 mm Width: 1400 mm Height: 1650 mm Approx. weight: 950 kg Technical Data: - Welded steel frame - 3 rolls are driven by motor - Hardened shafts made of special steel - Upper roll hydraulically adjustable Hodsd Ab H Rspfx Aqtot - Horizontal and vertical operating positions - Standard rolls - Guide rolls - Equipped with a brake motor for precision bending - Portable control panel Options: - Digital readout EURO 700 - NC unit EURO 7,000 - Lateral angle guide rolls EURO 1,400 HPK 50 file Type Size Min. Dia Notes 1 60x10 20x10 600 300 Standard Rolls 2 100x15 50x10 600 300 Standard Rolls 3 35x35 15x15 600 300 Standard Rolls 4 Ø35 Ø20 600 300 Optional Rolls 5 Ø70x2 Ø25x1.5 1200 400 Optional Rolls 6 2”x2.9 1/2”x2.3 1000 300 Optional Rolls 7 70x30x3 30x15x2 1500 400 Optional Rolls 8 50x3 20x2 1600 400 Optional Rolls 9 50x50x6 30x30x3 600 400 Optional Rolls 10 50x50x6 30x30x3 900 600 Optional Rolls 11 60x7 30x4 600 400 Standard Rolls 12 60x7 30x4 700 400 Standard Rolls 13 60x7 30x4 700 400 Standard Rolls 14 UPN 80 UPN 30 800 400 Optional Rolls* 15 UPN 80 UPN 30 1200 600 Standard Rolls* * Special washer (spacer) may be required / Only with the special beam bending attachment • Capacities are based on a plate yield strength of 260 N/mm²

Stanje: novo, Dimensions (LxWxH): 1.10 x 1.15 x 1.40 m Approx. weight: 1,150 kg Total power requirement: 4 kW Sheet thickness: 6 mm Details: Hjdpfx Aod Ab Idoqtst - Hydraulic drive - Blade length: 200 mm - Notching angle adjustable from 60–140°, 6 mm - Notching angle adjustable from 30–59°, 4 mm

Stanje: novo, Bending length: 2600 mm Sheet thickness: 7 mm Top roller diameter: 200 mm Technical data: Hodpfsd Ab Ngex Aqtet - Back roller motorized - Cone bending device - Hardened and polished rollers - Entire body made of St 52 steel - Asymmetrical design for perfect bending - Top and bottom rollers driven by brake electric motors and planetary gearboxes within the transmission - Portable control panel - In compliance with CE standards Options: - Bottom roller driven by electric motor: EURO 2,200 - Digital display for rear roller position: EURO 1,010 - Extended rollers: EURO 966 - Profile rollers: EURO 1,190 We have numerous references!

Stanje: novo, Bending length: 1600 mm Sheet thickness: 8 mm Top roller diameter: 170 mm Hjdpfxod Ab Nqj Aqtot Technical Data: - Back roller driven by motor - Cone bending device - Hardened and polished rollers - Entire frame made from St 52 steel - Asymmetric design for perfect bending results - Top and bottom rollers driven by brake electromotors and planetary gearboxes - Portable control desk - In compliance with CE standards Options: - Bottom roller driven by electric motor: EUR 1,650 - Digital display for back roller position: EUR 1,010 - Extended rollers: EUR 966 - Profile rollers: EUR 1,190 We have numerous references!

Stanje: novo, Bending length: 1550 mm Sheet thickness: 3.5 mm Upper roll diameter: 110 mm Technical Data: - Rear roll driven by motor - Cone bending device - Entire frame constructed from St 52 steel - Main motor with brake system - Upper and lower rolls driven by electric motor, gearbox, and gear system - Mobile control panel - Cast iron body - Manual movement of rear and lower rolls - Complies with CE standards Options: - Upper roll driven by electric motor EURO 1,166.00 - Digital position display for rear roll EURO 1,010.00 - Hardened rolls EURO 995.00 - Special voltage EURO 480.00 Heded Ab N Depfx Aqtst - Material feed table - Lower roll driven by electric motor We have numerous references!

Stanje: novo, Sheet thickness: 35 Hodpjd Ab N Iefx Aqtot Bending length: 4100 Top roll diameter: 540 Technical data: - Hardened and polished rolls - Complete body made of ST-52 steel - 4 rolls arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for bottom and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulics and gearbox - Vertical movements of the bottom roll are hydraulically driven - Mobile control panel - In accordance with CE standards Options: - Variable rotation speed: EUR 6,940 - Material feed table: EUR 5,100 - Oil cooler: standard - Central support: EUR 18,750 - Side supports: EUR 17,000 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requests) We have numerous references!

Stanje: novo, Sheet thickness: 70 mm Bending length: 2100 mm Top roll diameter: 540 mm Technical specifications: - Hardened and polished rolls - Full body made of ST-52 steel - The 4 rolls are symmetrically arranged - Hydraulically driven top cover for easy material removal - Digital readout for lower and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulic system and gearbox - Vertical movement of the lower roll is hydraulically driven - Movable control panel - Compliant with CE standards Options: - Variable rotation speed EURO 6,940 - Material feed table EURO 5,100 Hedpfx Aod Ab N Soqtst - Oil cooler STD. - Central support EURO 19,500 - Side supports EURO 10,400 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Exchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have numerous references!

Stanje: novo, Sheet thickness: 45 mm Bending length: 3100 mm Top roll diameter: 480 mm Technical data: - Hardened and polished rolls - Complete frame made of ST-52 steel - 4 rolls arranged symmetrically - Hydraulically operated top for easy material removal - Digital display for positioning of lower and side rolls - Hydraulic positioning - Top and bottom rolls driven by hydraulic system and gearbox Hjdped Ab Rcjfx Aqtet - Vertical movement of lower roll hydraulically operated - Mobile control panel - In compliance with CE standards Options: - Variable rotation speed (on request) - Material feed table (on request) - Oil cooler (on request) - Central support (on request) - Side supports - Automatic material extractor (on request) - PLC control (on request) - CNC control (on request) - Automatic material loading system (on request) - Interchangeable top roll (on request) - Adjustable lower roll support system (for special customer requirements) (on request) We have many references!