Ge Healthcare Axichrom nakup rabljenega (9.086)

Stanje: novo, prevoženi kilometri: 500 km, moč: 184 kW (250,17 KM), vrsta goriva: dizel, skupna masa: 17.500 kg, konfiguracija osi: 2 osi, barva: rdeča, vrsta prenosa: samodejen, Oprema: ABS, elektronski program stabilnosti (ESP), parkirni grelec, pogon na vsa štiri kolesa, New vehicle: M.A.N. TG3 17.5t single-tired special chassis with day registration for heavy off-road use. All-wheel drive 4x4 with all differential locks and 4.50 m wheelbase, single tires, high chassis, automatic transmission, air conditioning, auxiliary heater, tire pressure monitoring system, and much more. Comes with MAN manufacturer’s warranty. Equipment: - TN double cab with 3 seats - High chassis design - All-wheel drive 4x4 - Wheelbase: 4,500 mm - Mileage: approx. 711 km (delivery miles) - Single tires - Suitable for bodies up to approx. 6.20 meters - Unladen weight: 6,780 kg Kodpfx Aoykxxxjl Nslr - Payload: 10,720 kg (at gross vehicle weight 17,500 kg) - Engine: MAN D0836 LFLBN with 250 HP - Euro 6e - Differential locks on front and rear axles - MAN G102 transfer case with road and off-road mode - Electronic transfer case lock management (VSM) - MAN PowerMatic 08.13 OD automatic transmission - MAN Idle Speed Driving transmission function - MAN TipMatic Efficiency driving program up to 70,000 kg - MAN TipMatic Offroad driving program up to 70,000 kg - MAN TipMatic Emergency driving program - Air conditioning - 4 kW additional water heater - Trailer coupling: Maul Ringfeder type RF40/G150B with air brake connections - Perm. gross train weight: 28,000 kg - Perm. towing capacity: 16,845 kg - Perm. central axle trailer load: 16,000 kg - Ball-type trailer hitch - Front and rear axles leaf-sprung - Front axle: 9,000 kg, driven planetary axle, engageable, with diff lock - Rear axle: HP-1333, 13,000 kg, single tires, with diff lock - Axle ratio: i=6.00 - Stabilizer for front and rear axles - Shock absorbers on front and rear axles - Electronic braking system (EBS) - High-performance engine brake MAN EVBec - Hill-hold function MAN EasyStart - Drum brakes front and rear - ASR, ESP, ABS - Emergency brake assist (EBA) - Front detection - Tire pressure monitoring (TPM) with tire temperature display - MAN AttentionGuard driver alertness warning - Alcohol interlock pre-installation - Cruise control - Multifunction steering wheel - 150-liter fuel tank - Roof hatch - LED daytime running lights - LED rear lights - Stone guard for front headlights - Electrically adjustable and heated exterior mirrors - Premium air-suspended driver’s seat package, Plus air-suspended passenger seat package - Air-suspended comfort driver’s seat with lumbar support and shoulder adjustment - Air-suspended comfort center seat with integrated belt system, set back - Air-suspended comfort passenger seat - New vehicle (day registration in 02/2026) with MAN manufacturer’s warranty Net price plus 19% VAT. Attractive financing options available upon request. All details without guarantee. Errors and prior sale excepted. Internal vehicle number: 2585

Stanje: dober (rabljeno), Leto izdelave: 2015, Double-edger with electric adjustment via joystick or programming (manufacturer: Weintek, Austria) Alignment of the beam via 3 cross chains (can be controlled individually or synchronously) Maximum cutting length: 4.2 m Kerf display with 2 lasers Saw motors: 6.5 kW each Maximum cutting width: 0.6 m Klodewy Hv Ejpfx Al Nsr Maximum cutting height: 80 mm Maximum cutting height: 60 mm

Stanje: rabljeno, prevoženi kilometri: 105.456 km, moč: 120 kW (163,15 KM), prva registracija: 11/2023, vrsta goriva: dizel, skupna masa: 3.500 kg, barva: bela, vrsta prenosa: samodejen, število sedežev: 3, dolžina tovornega prostora: 4.330 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 2.160 mm, Oprema: ABS, centralno zaklepanje, dvižna zadnja plošča, klimatska naprava, navigacijski sistem, Leasing or hire purchase possible, subject to credit approval. We are happy to provide you with an offer, also for start-ups. TGE 5.160 4 x 2 SB Engine, Transmission: * Engine: 120 kW, 1968 cc, Euro 6E * 8-speed automatic transmission Assistance systems: * Cruise control * ESP with electronic differential lock * Emergency braking assistant * Start/Stop system * ASR, ABS Chassis, attachments: * 4 x 2 * Wheelbase: 4490 mm * Leaf suspension * Spare tyre * AdBlue Tyres: Klodpfx Aoy Ekxbel Ner * Size: 205/75R16C (see photos for condition) Body: * Box body with tail lift * Internal dimensions approx.: 4.33 x 2.1 x H 2.16 m * Tail lift capacity 750 kg Cabin: * Roof spoiler * Air conditioning * Electrically adjustable and heated mirrors * Electric windows * Air-suspended and height-adjustable driver’s seat * Double passenger bench seat * Central locking with remote control * Touchscreen, USB, DAB * Sat nav Vehicle No.: 6895 Sale only to businesses or for export. Prices are net plus VAT or export. All information without guarantee. PARLIAMO ITALIANO, GOWORIM PO RUSSKI, DOMLUVIME SE CESKY, WE SPEAK ENGLISH

Stanje: rabljeno, Leto izdelave: 2013, Trumpf TruLaser 5030 Fiber with Double Tower Storage System – Laser Cutting Machine - Working area: 3000 x 1500 mm - Laser power: 5,000 W - incl. LiftMaster Compact & TruStore 3030 - Year of manufacture: 2013 Equipment: - Working area: 3000 x 1500 mm - Enclosed machine frame - Integrated cabinet - Automatic longitudinal pallet changer - Torque drive combined with linear direct drive - Enclosed beam guidance via fiber optic cable (LLK) - Machine chiller (water-to-air) - Integrated control cabinets with interior lighting - Power supply to TruDisk via the machine - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning Trumpf Laser: - Fiber optic cable as per standard layout (laser placed directly next to the machine) - Laser chiller (water-to-air) - Excitation via pump diodes - Laser power control - Laser logbook function Cutting Unit: - Universal cutting unit with fully adaptive lens system - Cutting head strategy - Protective glass to prevent lens contamination - Protective glass condition monitoring - ControlLine: height regulation and edge detection of sheet metal Kjdpfxjym Umko Al Nolr Control: - Simple workshop programming - Advanced workshop programming - Fast repeat production - Sinumerik 840D SL control - 17" color touchscreen - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - FastLine - FlyLine Safety: - CE marking - Light barriers - Multi-chamber extraction system - Integrated compact dust extractor - Fire detection system in the compact dust extractor - Machine enclosure with certified viewing window / right side door - Electric roller roof LiftMaster Compact: - Basic unit with synchronized loader, peeling device, and sheet thickness gauge, movable unloading rake, incl. loading/unpacking station - Low-scratch, position-accurate unloading (includes stainless steel rake with banded tines, tine spacing 67 mm; up to s = 15 mm) - Cleaning brush for support rails - Separation of thin sheet for synchronous loader (0.8–2.0 mm) TruStore 3030 Double Tower Storage System: - Basic module 3000 x 1500 mm - LiftMaster Compact integration - Storage compartment extension for LiftMaster Compact - 2 x expansion module 1.9 (for up to 9 storage compartments, loading height 90 mm, without pallets, module height 1980 mm) - Storage and retrieval unit - Extension for storage and retrieval unit for expansion module - 34 storage compartments 90 mm, incl. pallet - 10 pallet shelves

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.100 mm, skupna širina: 650 mm, skupna višina: 2.100 mm, Premični fermentacijski voziček iz nerjavečega jekla z 10 aluminijastimi izvleki, z zgornjim izvlekom, dobre bombažne krpe, za etažno peč WP Matador, rabljena oprema. Klodsy Ebhtepfx Al Njr

Stanje: rabljeno, prevoženi kilometri: 150.000 km, moč: 115 kW (156,36 KM), prva registracija: 08/2019, vrsta goriva: dizel, skupna masa: 3.500 kg, naslednji pregled (TÜV): 11/2026, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 3, dolžina tovornega prostora: 4.416 mm, širina tovornega prostora: 2.107 mm, višina nakladalnega prostora: 2.369 mm, Leto izdelave: 2019, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, Bitte kontaktieren Sie uns auch über WhatsApp/Viber. E-Mail: Ksdpjy A Uyksfx Al Nolr Sonderausstattung: Ablagefach auf der Armaturentafel mit USB-Anschluss, Audiosystem: Radio mit CD-Player (MP3-fähig), USB- und Bluetooth-Freisprecheinrichtung, Aufbauhersteller-Interface, Fahrzeugschlüssel mit Fernbedienung, Hinterachs-Federung: Trapezfeder mit Zusatzfeder, Klimaautomatik, Kraftstofftank: 90 Liter, Reserverad in Fahrbereifung, Reserveradhalter zwischen Bodenlängsträger, Fahrerhaussitze: Komfortfahrersitz (hydraulisch) Weitere Ausstattung: Fahrerairbag, Anhängersteckdosen-Vorbereitung, Antriebsschlupfregelung (ASR), Ausführung: C-Reihe, Außenspiegel elektrisch verstell- und beheizbar, Bremsassistent, elektronische Bremskraftverteilung, Vorderachs-Federung: Querblattfeder, getönte Front- und Seitenscheiben, 150-A-Generator, Geschwindigkeitsbegrenzer 160 km/h, Standardpritsche, Kombiinstrument mit Pixelmatrix-Display, Leuchtweitenregulierung, 2,3-Liter Dieselmotor mit 115 kW, Radiovorbereitung mit Lautsprechern, Radstand 4.100 mm, Abgasnorm Euro 6, Beifahrerdoppelsitz mit Kopfstützen, Wartungsanzeige, zulässiges Gesamtgewicht 3,5 t. Das Fahrzeug stammt aus unserem eigenen Fuhrpark mit vollständig nachvollziehbarer Servicehistorie. Zu den Hauptausstattungen zählen Bluetooth, Multimediasystem, Multifunktionslenkrad, elektrische Spiegel und Fenster usw.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, IRCO Profimat podajalnik palic Klodpfx Aoxxq Uaol Ner Leto izdelave: 2013 Dolžina palice: 3 m Premer palice: 75 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.350 mm, • Condition – used, fully serviced and calibrated • Manufacturer – VIET • Model – Challenge 323 • Working width – 1350 mm • Sanding thickness range – 3-160 mm • 3 sanding units: - first calibrating drum, made of hard rubber - second rubber drum, with lower hardness and engage/disengage function - third pad unit • All drums diameter – 240 mm • Option to operate the 2nd and 3rd drum with engage/disengage or manually with a fixed height • Main motors: 2 x 11 kW • Stepless conveyor feed speed adjustment – variator • Electronic indicator for workpiece thickness • Paper cleaning/air-blast mechanism – on 2nd and 3rd units • Reliable end-position oscillation • Conveyor in very good condition • Table extension rollers Kljdpfov R Tc Uex Al Nsr • Material thickness gauge • Sensor preventing entry of excessively thick workpieces • Original paint • Abrasive belt size – 2620 x 1380 mm • Extraction ports – 7 units • Weight – 3,580 kg • Year of manufacture – 1998 • Overall dimensions: 270 x 225 x 220 cm (L x W x H)

Stanje: rabljeno, lastna masa: 4.060 kg, največja dovoljena obremenitev: 6.440 kg, skupna masa: 10.500 kg, konfiguracija osi: 1 os, prva registracija: 01/2018, dolžina tovornega prostora: 7.450 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 3.100 mm, prostornina tovornega prostora: 57 m³, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5, velikost zadnje pnevmatike: 235/75R17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, -- Pridržujemo si pravico do tiskarskih napak, napak in sprememb, vzorčne slike --, Več podatkov na: !, Več podrobnosti: ! Ksdpfsy Dkbajx Al Nslr

Stanje: novo, lastna masa: 2.980 kg, največja dovoljena obremenitev: 7.520 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.480 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, medosna razdalja: 990 mm, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Loading height (laden) approx. 860 mm, vehicle interior width approx. 2,480 mm, front wall made of galvanized steel, 600 mm aluminum drop sides, foldable and removable, removable stanchions, 40 mm wooden floor, three stanchion pockets (80 x 80 mm) in the center for plug-in stanchions, 6 lashing rings, outer frame with lashing eyes, reinforced landing gear support with load and quick-shift function, contour marking and side underrun protection, mudguards and spray suppression at the rear. Surcharge for front wall mesh (perforated sheet) 1,600 mm high: €1,400. Surcharge for aluminum ramps (pair load capacity 8 t) and 2 folding supports at the rear: €1,800. Klsdpey Dkbtsfx Al Njr -- Errors, omissions, and changes excepted; sample pictures -- More data at: !, More details at: !

Stanje: novo, lastna masa: 2.850 kg, največja dovoljena obremenitev: 7.650 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.280 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.580 mm, prostornina tovornega prostora: 46 m³, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 245/70 R 17,5, velikost zadnje pnevmatike: 245/70 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, 2 x row combination lashing rails, 7 pairs of lashing rings in the floor, load securing according to EN 12642 Code XL, 1 x interior light, sidewall and front wall thickness approx. 17 mm each, rental price from €580 per month, -- typographical errors, mistakes and changes reserved, sample images --, More data at: !, More details: ! Kodpfx Aljy Dkbmj Nolr

Stanje: novo, lastna masa: 6.890 kg, največja dovoljena obremenitev: 23.110 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Dolžina tovorne površine 9.000 mm, višina nakladanja obremenjena ca. 900 mm, 20 x pritrditvenih obročev po 10 t, 16 x odprtin za drogove v zunanjem okvirju, lesena tla debeline 70 mm, skladiščna škatla s pokrovom za pritrdilne verige ali napenjalne trakove, označitev obrisa po predpisih, parkirna zavora z vzmetnim akumulatorjem, vključno z indikatorji obremenitve osi, vozilo vroče cinkano s potopno kopeljo, na zalogi tudi z dolžino tovorne površine 8,10 m in razširitvijo, dodatno - aluminijaste rampe: cena 1.600 €, opozorilne table z osvetlitvijo: cena 800 €, napake v tisku, spremembe in napake pridržane, vzorčne slike, več podatkov na: !, več podrobnosti: ! Kodpfx Aloy Dkbye Nolr

Stanje: novo, lastna masa: 2.980 kg, največja dovoljena obremenitev: 7.520 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.280 mm, širina tovornega prostora: 2.480 mm, vzmetenje: jeklo, velikost pnevmatike: 245 / 70 R 17,5, medosna razdalja: 990 mm, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 245 / 70 R 17,5, velikost zadnje pnevmatike: 245 / 70 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Rampa približno 2.700 mm dolga x 560 mm široka, rampe z rešetkastimi rešetkami, višina nalaganja: 840 mm, 12 pritrdilnih obročev po 2,5 t, 8 x pritrdilni obroč po 6 t, jekleni stranski paneli, zložljivi in odstranljivi, lesene deske 50 mm, nakladalna površina zadaj poskošena, notranja širina nakladalne površine 2.480 mm, zadnji količek odstranljiv, spredaj za prehod, na voljo tudi z dolžino nakladalne površine 5.300 mm!!, najemnina od 500 € -- Pridržujemo si pravico do napak, sprememb in tiskarskih napak, vzorčne slike -- Več podatkov na: !, More Details: ! Klodpjy Dkb Tefx Al Nsr

Stanje: novo, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.200 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, z indikatorjem obremenitve osi, dolžina nakladalne površine 8.200 mm, nakladalna višina obremenjena pribl. 900 mm, 20 pritrdilnih ušes po 10 t, 14 žepov za kole v zunanjem okvirju, nakladalne rampe (pribl. 3.000 x 750 mm), plezalna letvica na zunanji strani pri rampi in zadnjem nagibu, rampe nastavljive po širini, vzmetni dvižnik za enodelne rampe, lesen pod debeline 70 mm, zabo za shranjevanje z verižnim ali napenjalnim trakom, označevalni trak v skladu s predpisi, parkirna zavora z vzmetnim akumulatorjem, vozilo popolnoma vroče pocinkano, vključno z indikatorji obremenitve osi; dodatki za doplačilo: opozorilne table + osvetlitev + rotacijska luč = cena: 800 €, razširitev na 3 m = cena: 1.100 €, hidravlične enodelne rampe 500 €, hidravlični pomik ramp? = cena: 1.000 €, izrez za izkopno roko = cena: 1.000 €. Na zalogi tudi z dolžino nakladalne površine 9,20 m. -- Pridržujemo si pravico do napak in sprememb, vzorčne slike -- Več podatkov na:!, More Details: ! Ksdpfey Dkb Hex Al Njlr

Stanje: rabljeno, lastna masa: 3.750 kg, največja dovoljena obremenitev: 6.750 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, prva registracija: 01/2018, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 47 m³, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Spredaj s portalnimi vrati za prevoz skozi, zadaj s portalnimi vrati, 7 parov priveznih ušes na tovorni površini, višina nakladanja cca 1.050 mm, spredaj z 2 kosoma menjalniških podpornih vitel z dvema prestavama, BPW osi, -- pridržujemo si pravico do tipkarskih napak, sprememb in možnih napak, vzorčne slike --, Več podatkov na: !, Več podrobnosti: ! Klodsy Dkaispfx Al Ner

Stanje: rabljeno, lastna masa: 6.740 kg, največja dovoljena obremenitev: 23.260 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2019, naslednji pregled (TÜV): 01/2027, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5 ---/140J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R17,5 ---/140J, velikost zadnje pnevmatike: 235/75 R17,5 ---/140J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Zatezne ušeske, žepi za drogove, -- Pridržujemo si pravico do tiskarskih napak, napak in sprememb, slikovni vzorci -- Več podatkov na: !, Več podrobnosti: ! Kodoy Dkavepfx Al Nelr

Stanje: novo, lastna masa: 6.950 kg, največja dovoljena obremenitev: 24.050 kg, skupna masa: 31.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.500 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Podvozje: vroče pocinkano, lesen pod debeline 70 mm, 18 pritrdilnih ušes, 12 žepov za stebre, 2 rampi vsaka dolžine 3.110 mm x širine 760 mm, hidravlični enodelni rampi, nakladalna višina: 880 mm, vklj. z indikatorji obremenitve osi. Doplačila za: zadnjo krmiljeno os: 3.500 €, opozorilne table + osvetlitev in rotacijska luč: 200 €, širitev na 3 m z lesom: 300 €, hidravlični pomik ramp: 1.000 €. Na voljo tudi z vlečno uho K80! -- Pridržujemo si pravico do tiskarskih napak, sprememb in napak. Prikazne slike -- Več podatkov na zahtevo! Kjdpfxsy Dkaco Al Njlr

Stanje: novo, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Chassis: hot-dip galvanized, wooden floor 70 mm thick, 20 lashing rings, loading ramps (approx. 3,100 x 750 mm), climbing bar on the outside of the ramps and rear slope, ramps laterally adjustable, ramps with spring lifting system, 8 stake pockets, loading height: 900 mm, 2 toolboxes, contour markings in accordance with regulations, incl. axle load indicators. Surcharge for: steel front wall, galvanized: €500. -- Subject to misprints, errors, and changes. Sample images --. More data at: !, More details: ! Klodpfx Aey Di Ufjl Ner

Stanje: rabljeno, lastna masa: 6.520 kg, največja dovoljena obremenitev: 23.480 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2019, dolžina tovornega prostora: 8.610 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5 ---/140J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 ---/140J, velikost zadnje pnevmatike: 235/75R17,5 ---/140J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Low-bed loading area length approx. 6.50 m, total loading area length approx. 8.60 m, loading height approx. 900 mm. This vehicle is being offered on behalf of a bank. Klsdpfoy Di Ulsx Al Nsr -- Subject to typographical errors, mistakes, and changes. Sample images -- More data at: ! More details: !

Stanje: rabljeno, lastna masa: 4.880 kg, največja dovoljena obremenitev: 5.620 kg, skupna masa: 10.500 kg, konfiguracija osi: 1 os, prva registracija: 01/2018, dolžina tovornega prostora: 7.450 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 3.100 mm, prostornina tovornega prostora: 57 m³, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5, velikost zadnje pnevmatike: 235/75R17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Nakladalna ploščad Dautel DL1500 S, nosilnost 1.500 kg, z lastnimi baterijami, -- pridržujemo si pravico do tiskarskih napak, napak in sprememb, vzorčne slike --, Več podatkov na: !, More Details: ! Klodpfsy Di Ursx Al Nsr

Stanje: novo, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Celková dolžina nakladalne površine pribl.: 8.800 mm, poglobljeno ležišče pribl.: 6.600 mm, nakladalna višina obremenjena pribl.: 890 mm, 24 x pritrditvena ušesa po 10 t, 12 x žeplji za zaboje v zunanjem okviru, nakladalne rampe (pribl. 3.100 x 750 mm), protidrsna letvica na zunanji strani ramp in zadnjega naklona, rampe nastavljive vstran, lesena tla debeline 68 mm, skladiščna škatla s pokrovom za pritrditvene verige ali napenjalne pasove, označevanje obrisa v skladu s predpisi, rotacijska opozorilna luč, vozilo vroče pocinkano s potopno kopeljo, vključno z indikatorji osi, Doplačilo za: opozorilne table z osvetlitvijo in rotacijsko lučjo, razširitev na 3 m z lesom, cena: 500 €; hidravlično pomikanje ramp, cena: 1.000 €; izrez za bagersko roko, cena: 1.000 € neto. --- Tiskovne napake, napake in spremembe pridržane, vzorčne slike -- Več podatkov pod: !, Več informacij: ! Kljdpfoy Di T Ijx Al Ner

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolt system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams, 1,500 mm cantilever, pre-drilled for on-site roof construction (*excluding timber purlins and trapezoidal sheets for the roof construction) - Including longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and system can be extended at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction using IPE profiles Ksdpfx Aoh R Taqsl Nelr - Surface of all components hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,500 mm center-to-center spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with scheduling prior to delivery. Material is sensibly packed for easy unloading. The installation surface must be concrete, level, suitable for dowelling, and able to withstand the loads applied. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any official permits that may be required. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to occupational health and safety regulations, it is recommended that the rack uprights have at least 500 mm clearance above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. Kljdpfxomhhype Al Nor We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Ksdjmhh Dhspfx Al Nslr - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Ksdpfomhh Dzjx Al Nslr Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.