Fastech 3-Valjni Stroj Za Upogibanje nakup rabljenega (117.725)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2013, Premer cevi (maks.): 30 mm, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Oprema: CE označba, dokumentacija / priročnik, kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, HUVEMA MIP30, stroj za upogibanje profilov, stroj za upogibanje cevi, 30 mm, št. ct2437 Naprodaj je stroj za upogibanje profilov HUVEMA MIP30 in stroj za upogibanje cevi, oba v odličnem stanju. Proizvajalec: HUVEMA MIP 30 Tip: MIP 30 Letnik proizvodnje: 2013 Valji: 2 pogonjeni Fedpfx Apjzq Sqtsrspk Navzgor in navzdol gibanje zgornjega valja je ročno Maks. premer gredi: 30 mm Delovna hitrost: 4 m/min Zmogljivost upogibanja: - Ploščato jeklo: 50 x 10 mm - Kvadratni profil: 35 mm - Zaprt profil: 40 x 40 mm - Cev: 48 x 3 mm Moč: 400 V / 0,75 kW 50 Hz Električno stikalo za nogo, z varnostnim izklopom Standardni komplet za upogibanje Teža: približno 200 kg Dimenzije: Š 650 x V 1350 x G 580 mm

Stanje: novo, Leto izdelave: 2026, Ring Bending Machine Zopf - Model ZB 110/3 H - three driven rollers with smooth surface - hydraulic adjustment of the upper roller - horizontal and vertical working positions - digital display with memory function - shafts supported with tapered roller bearings - use of interchangeable sliding rails on the guide carriage - roller diameter 260 mm - shaft diameter 80 mm - shaft rotation speed 7 rpm - drive motor 2.2 kW - hydraulic cylinder pressing force 270 kN - bending capacity up to 100x15 mm on edge Fsdpfx Apjdkxiborjpk - round tube up to 120x2 mm - angle iron 80x80x10 mm - weight 1400 kg

Stanje: novo, Leto izdelave: 2026, Pipe bending machine ZOPF - Model R 1 - without tooling - incl. foot pedal with emergency stop control - without tools - programmable control unit Fodefiqntopfx Aprspk - 100 programs, each with 9 bends - C-axis display and control - manual and automatic bending modes possible - bending angle and springback are programmable - quick tool change via plug-in system - scale for counterholder integrated into the table - mobile with pallet truck - dimensions 930x410x1000 mm - weight 230 kg - motor 1.5 kW - 220 Volt AC - bending radius from R55 - R340 mm - bending capacity for tubes Ø 5 mm to 50 mm - max. bending angle 210°

Stanje: novo, Leto izdelave: 2026, Ring bending machine Manufacturer: Zopf - Model ZB 70/2 H - Two driven rollers with knurled surface - Hydraulic adjustment of the top roller - Can be operated in horizontal and vertical positions - Digital display with memory function - Shafts mounted in tapered roller bearings - Use of interchangeable slide guides on the guide carriage - Roller diameter: 152/162 mm - Shaft diameter: 40 mm - Shaft speed: 8.5 rpm - Drive motor: 1.1 kW - Hydraulic cylinder pressing force: 80 kN - Bending capacity up to 60x10 mm (upright) Fsdpfx Asdktnkeprspk - Round tube up to 70x2 mm - Angle iron: 50x50x6 mm - Solid material: 35 mm - Weight: 470 kg

Stanje: novo, Leto izdelave: 2026, Rebar Bender P38 Evo mobile with rollers Fpjdpfx Aehiyadjprsk 400V-50Hz 3-phase AC Motor 2.8 kW, with foot pedal CE declaration with preset bending angle via plug-in pins 9 RPM Foot switch Dimensions: 86 x 90 x 85 cm Weight: 320 kg Bending capacity at R=65 kg/mm²: Round steel 34 mm at R=86 kg/mm²: Round steel 32 mm Includes 6 bushings (50, 60, 70, 80, 95, 120 mm) Includes 1 square pin

Stanje: novo, Leto izdelave: 2026, Profilna upogljalna naprava Zopf - Model ZB 60/3 MD - Letnik izdelave 2026 - Pogon z motorjem Fsdpfxogh T Hkj Aprjpk - Pogon s tremi valji - Z digitalnim prikazovalnikom - Premer valja 30 mm - S standardnimi valji - Upogljalna zmogljivost do okroglih cevi 48 x 3,2 mm - Polni material do 30 mm - Teža približno 190 kg - Motor 0,75 kW, 400 V, 50 Hz, 3-fazni - S podstavkom, horizontalnim in vertikalnim, mobilnim - Novo

Stanje: rabljeno, Leto izdelave: 1997, Širina pločevine: 2540 mm Debelina pločevine: 3 mm Razdalja med stebri: 2600 mm Najmanjša dolžina reza: 5 x s mm Nastavljivost spodnje kleme: 80 mm Nastavljivost zgornje kleme: 80 mm Odpiralna širina: 350 mm Skupna potrebna moč: 4 kW Dimenzije (d x š x v): 4 x 1 x 1,5 m Fpedpfsx Harmex Aprsk Z dodatno opremo in PLC krmiljenjem Alba.

Stanje: rabljeno, Leto izdelave: 1983, Širina pločevine 2540 mm Debelina pločevine 2 mm Razdalja med stojali 2600 mm Najmanjša dolžina reza 5 x s mm Nastavljivost spodnje čeljusti 80 mm Nastavljivost zgornje čeljusti 80 mm Odpiralna širina 350 mm Skupna potrebna moč 4 kW Mere D x Š x V 4 x 1 x 1,5 m Fpjdpfxjw H Dkaj Aprek Z dodatki.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Hydraulically operated three-roll plate bending machine Manufacturer: FACCIN, Model: 3HEP 2021 Technical Specifications: Number of rolls: Three Geometry of side rolls: Linear guides Working width: 2,000 mm Top roll diameter: 215 mm Side roll diameter: 195 mm Guaranteed installed power: 7.2 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 3,000 kg Length: 3,700 mm Width: 1,000 mm Height: 1,100 mm Guaranteed Performance: for material with yield strength 260 N/mm² Rolling capacity (full working width): 13 mm Pre-bending capacity (full working width): 9 mm from tube diameter: 1,075 mm Fsdpfx Aocuxp Tjprjpk Rolling capacity (full working width): 9 mm Pre-bending capacity (full working width): 7 mm from tube diameter: 280 mm Standard Features: Double linear guide system for roll movement Extra-wide bearing blocks MCS double bearing system for roll rotation movement Extra heavy-duty, double-pinned swing arm bearing Hardened rolls for high wear resistance Hydraulic parallelism system for side rolls Digital readout for side roll positions Cone bending device Control via swiveling operator panel Safety pull-cord with emergency stop and CE certification Mobile control console

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Hydraulic Two-Roller Plate Bending Machine Guaranteed Performance: Fpodpfec S N Riex Aprek Sheet thickness for bending (material 260 N/mm² yield strength): 2 mm Sheet thickness for bending (AISI 304-316 stainless steel): 1.5 mm Cycle time per part: 15 seconds Technical Data: Working length: 1000 mm Installed power: 5.5 kW Rolling speed: 7 m/min Available immediately ex works!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Mechanical Asymmetric Three-Roll Plate Bending Machine with Pre-bending Manufacturer: FACCIN, Model: ASI 2015 Guaranteed Performance: Plate thickness for rolling at 750 mm diameter: 5 mm Plate thickness for pre-bending at 750 mm diameter: 4 mm Plate thickness for rolling at 195 mm diameter: 4 mm Plate thickness for pre-bending at 195 mm diameter: 3 mm Performance data based on steel with a yield strength of 240 N/mm² and a tensile strength of 370 N/mm² Technical Data: Working length: 2,000 mm Top roll diameter: 150 mm Lower roll diameter: 150 mm Side roll diameter: 150 mm Installed power: 4.3 kW Rolling speed: 4 m/min Length: 3,300 mm Width: 750 mm Height: 1,200 mm Weight: 2,136 kg Standard Equipment: All rolls are forged and induction-hardened Both central rolls are driven Safety control ensuring immediate stop of all machine movements Machine frame stands on a welded base frame. Optimal stability and reliability of the machine are thus ensured. Optimal force transmission into the machine frame via long guides during straight adjustment movement of the bending rolls. (No arc-shaped adjustment movement, therefore no torsional forces in the frame) Digital display for positioning of the adjustable roll Fjdpfjcuxpqex Apropk Motorized adjustment of the adjustable roll Cone bending device with hardened stop block Emergency stop pull cord running around the machine Machine with CE certification and German documentation

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Three-roll plate bending machine with variable axes Manufacturer: FACCIN, Model HAV/S 3145 Fedpfec S N Nqex Aprspk Technical specifications: Number of rolls: Three Side roll geometry: variable Working width: 3000 mm Top roll diameter: 450 mm Variable three-roll plate bending machine

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Max. rolling capacity (cold forming): mm 32 Max. bending capacity (cold forming): mm 24 For pipe diameter: mm 2050 For material with yield strength: N/mm² 260 Usable length: mm 3050 Number of rollers: four Top roller diameter: mm 410 Bottom roller diameter: mm 390 Driven rollers: two Rotation speed: 5 m/min Rolling speed: hydraulic Fpedpfx Ajf T Rzfoprsk Installed power: 30 HP Voltage: 400V, 50Hz, 3Ph Includes: - Hardened & polished rollers - Cone bending device - Electronic roller parallelism - Siemens PLC control - CE marking with corresponding drive brake - Mobile control panel

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, FACCIN 4HEP S54 Four-Roller Plate Bending Machine Electronically controlled, electric drive, four-roller plate bending machine Technical Specifications: Number of rollers: Four Side roller geometry: Lever-arm guided Working width: 3,000 mm Top roller diameter: 300 mm Bottom roller diameter: 280 mm Side roller diameter: 200 mm Fpodpfx Apsiivgrorsk Guaranteed installed power: 10.8 kW Guaranteed maximum rolling speed: 5 m/min Guaranteed machine weight: 10,000 kg Length: 5,500 mm Width: 1,400 mm Height: 1,600 mm Guaranteed Performance: For material with yield strength of 260 N/mm² Rolling capacity (full working width): 18 mm Pre-bending capacity (full working width): 12 mm From pipe diameter: 1,500 mm Rolling capacity (full working width): 12 mm Pre-bending capacity (full working width): 10 mm From pipe diameter: 450 mm Standard Equipment: Electric drive for the top roller Lever-arm adjustment of the side rollers Extra heavy-duty, double-pinned drop-end bearing Electronic Parallelism System (EPS) Hardened rollers for high wear resistance Cone bending device Mobile control panel 3 digital readouts for side and lower roller positions Safety cable with emergency stop and CE certification

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, premer spodnjega valja: 310 mm, premer zgornjega valja: 320 mm, premer valja: 310 mm, dolžina valja: 1.550 mm, delovna širina: 1.500 mm, najv. debelina jeklene pločevine: 38 mm, skupna masa: 12.500 kg, skupna dolžina: 4.500 mm, skupna širina: 2.300 mm, skupna višina: 1.740 mm, moč: 18,39 kW (25,00 KM), delovna dolžina: 1.500 mm, Oprema: dokumentacija / priročnik, nujno zaustavitev, FACCIN HAV 15342 Variable 3-Roller Plate Bending Machine Electronically controlled, hydraulic 3-roller plate bending machine Technical Data: Number of rollers: three Side roller geometry: variable Working width: 1,550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Fpsdpfx Apot Akt Rersk Pressing force against top roller: 160 tons Working pressure at rated capacity: 250 bar Guaranteed installed power: 18 kW (25 HP) Guaranteed max. rotation speed: 3.5–7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed Performance: for material with yield strength 260 N/mm² Rolling capacity (full working width): 38 mm Pre-bending capacity (full working width): 20 mm from pipe diameter: 1,600 mm Rolling capacity (full working width): 30 mm Pre-bending capacity (full working width): 17 mm from pipe diameter: 415 mm Standard Equipment: Variable geometry with linear guides for roller movement Extra-long swing arm bearing for increased frame stability Electronic Parallelism System EPS Hardened rollers for high wear resistance All rollers ground after heat treatment Siemens S7-HMI PLC control PGS-CLASSIC control with Siemens touch panel High-tech hydraulics and electrics package Simultaneous rotation and roller movement Safety emergency cable with emergency stop and CE certification Centralized lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting supports and roller conveyors FACCIN Advantage Package AP

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Technical Specifications: Fodsd Eqg Nspfx Aprspk Section modulus: 100 cm³ Main shaft diameter: 130 mm Side shaft diameter: 130 mm Outer diameter of bending rolls: 410 mm Adjustable roll speed: 0–6 m/min Installed power: 18.4 kW (25 HP) Length: 1,900 mm Width: 2,200 mm Height: 1,900 mm Weight: 5,720 kg Standard Equipment: - Hydraulic adjustment of side rolls - 3 rolls driven (3 hydraulic motors + 3 planetary reduction gears) - Independent side profile guide rolls, adjustable in 6 directions, fully hydraulic - Automatic circumference/rotation speed compensation - Complete universal roll set for standard profiles and beams (12-piece) - Tool kit for machine equipment - Low voltage control on mobile operator panel - Safety device in accordance with regulations - Technical documents and CE certificates - Digital displays for the side roll positions Installed Options: Siemens NC control system PGS-CLASSIC

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, premer valja: 200 mm, dolžina valja: 2.000 mm, delovna širina: 2.000 mm, najv. debelina jeklene pločevine: 8 mm, vrsta vhodnega toka: trifazni, delovna dolžina: 2.000 mm, Hydraulically Operated Four-Roller Plate Bending Machine Manufacturer: BIKO, Model B4 2020 Technical Data: Number of rollers: Four Side roller geometry: Linear guides Working width: 2,000 mm Top roller diameter: 200 mm Bottom roller diameter: 180 mm Side roller diameter: 160 mm Rated installed power: 5.4 kW Fpsdpfjd Iclrox Aprsk Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 3,950 kg Length: 3,200 mm Width: 1,000 mm Height: 1,100 mm Guaranteed Bending Performance: For material with yield strength of 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 1,000 mm Rolling capacity (full working width): 5 mm Pre-bending capacity (full working width): 4 mm From tube diameter: 265 mm Standard Features: Linear guide system for roller movement Extra wide bearing blocks Needle bearings for roller rotation Extra heavy-duty, double-supported drop end bearing Hardened rollers for high wear resistance Hydraulic parallelism system for side rollers Digital display for side roller and lower roller positioning Cone bending device Control via swivel-mounted operator panel Safety trip wire with emergency stop and CE certification

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, TECHNICAL DATA: Number of rollers FOUR Geometry Linear guides Maximum sheet width mm 3000 Top roller diameter mm 390 Bottom roller diameter mm 370 Side roller diameter mm 295 Installed power HP 40 Infinitely variable rotational speed m/min 4-8 Machine weight (guaranteed) Kg 19,000 Guaranteed performance with material yield strength 260 N/mm² Rolling capacity (full working width) Ø 1950 mm 25 mm Pre-bending capacity (full working width) Ø 1950 mm 20 mm Rolling capacity (full working width) Ø 507 mm 18 mm Pre-bending capacity (full working width) Ø 507 mm 16 mm • Hardened and polished rollers Fpsdpfx Apegd T R Dorsk • Siemens NC control • Cone bending device with electronic tilting adjustment

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, FACCIN HAV 3293 Plate Width: 3200 mm Top Roll Diameter: 930 mm Side Roll Diameter: 800 mm Machine Weight: 150 tons Fpjdpoiivg Ssfx Aprek Rolling Capacity (Y:260 MPa/Ø 4650 mm): 3200 mm x 155 mm Pre-bending Capacity (Y:260 MPa/Ø 4650 mm): 3200 mm x 115 mm

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2016, obratovalne ure: 10 h, Including: Special iron bending tool ATRC 18 Special ornamental bending tool ATAR 305 Helical bending device ATSC Demonstration machine, less than 10 hours of operation! TECHNICAL DATA Shaft diameter: 30 mm Roller diameter: 128 mm Roller speed (rpm): 8.5 - 17 Drive motor: 0.75 kW Main switch with trip coil and built-in emergency stop (CP30 - CP30 R) - Reversing gearbox and dual-speed selector mounted on a separate control panel (CP30 - CP30 R) - Foot pedal for rotation control (L/R) with built-in emergency stop (CP30 PR) - Two-speed selector (CP30 PR) - Mechanical adjustment of the upper roller with digital position display - Two traction rollers with knurled surface - Machine inner frame made of steel - Shafts made of hardened and ground, high-strength steel - Gear wheels made of special steel with ground teeth - Rollers made of special steel, hardness 59/60 HRC Fpedpfx Aot Akxajprek - Outer cover in ABS - Working position: horizontal (CP30) - Working positions: horizontal and vertical (CP30 R - CP30 PR) Weight: CP 30 PR: 240 kg External dimensions (mm): CP30 PR Base: 680 x 800 – Height: 825 ACCESSORIES Guide rollers, 2-way Universal rollers (standard) Operating key Operating manual

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: električni, proizvajalec krmilnikov: Siemens, premer spodnjega valja: 160 mm, premer zgornjega valja: 175 mm, premer stranskega valja: 135 mm, dolžina valja: 1.550 mm, delovna širina: 1.500 mm, najv. debelina pločevine: 7 mm, moč: 4,4 kW (5,98 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, trajanje garancije: 12 meseci, Oprema: centralizirani mazalni sistem, dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, zavrtljivi zgornji valj, Electronically Controlled, Electrohydraulic Four-Roll Plate Bending Machine Manufacturer: FACCIN, Model: 4 EDL 1617 Technical Specifications: Number of rolls: Four Side roll geometry: Linear guides Working width: 1500 mm Top roll diameter: 175 mm Bottom roll diameter: 160 mm Side roll diameter: 135 mm Press force against top roll: 80 tons Guaranteed installed power: 4.4 kW (6 HP) Guaranteed maximum rotation speed: 0–10 m/min Guaranteed machine weight: 3,150 kg Length: 3,300 mm Width: 1,170 mm Height: 1,100 mm Guaranteed Performance: Fedpfx Apowwt Ddorspk With material yield strength 260 N/mm² Rolling capacity (full width): 7 mm Prebending capacity (full width): 6 mm From pipe diameter: 875 mm Rolling capacity (full width): 5 mm Prebending capacity (full width): 5 mm From pipe diameter: 225 mm Standard Equipment: Double linear guide system for roll movement Extra wide bearing blocks MCS double bearing system for roll rotation Extra heavy-duty, double-supported swing arm bearing Electronic Parallelism System EPS Hardened rolls for high wear resistance All rolls ground after heat treatment Siemens PLC control Electric drive for top roll to increase efficiency Safety emergency stop rope and CE certification Centralized lubrication Cone bending device Optional equipment included: CNC control PGS-ABSOLUTE

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, FACCIN 4HEP 3163 Four-Roll Plate Bending Machine Electronically controlled, hydraulic four-roll plate bending machine Technical Data: Number of rolls: Four Side roll geometry: Swinging lever guide Working width: 3,000 mm Top roll diameter: 630 mm Bottom roll diameter: 570 mm Side roll diameter: 500 mm Guaranteed installed power: 72 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 58,000 kg Length: 6,800 mm Width: 3,600 mm Height: 3,550 mm Guaranteed Performance: for material yield strength of 260 N/mm² Rolling capacity (full working width): 70 mm Pre-bending capacity (full working width): 60 mm from tube diameter: 3,150 mm Fpsdpfx Ajiivfqoprsk Rolling capacity (full working width): 55 mm Pre-bending capacity (full working width): 50 mm from tube diameter: 820 mm Standard Equipment: Swinging lever adjustment of the side rolls Extra heavy-duty, double-supported drop end bearing Electronic parallelism system (EPS) Hardened rolls for high wear resistance Cone bending device Mobile control panel 3 digital position indicators for the side rolls and bottom roll Safety trip wire with emergency stop and CE certification

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: hidravlični, število valjev: 3, premer gredi: 35 mm, največja hitrost vrtenja: 30 obr/min, skupna masa: 490 kg, moč: 1,5 kW (2,04 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, trajanje garancije: 12 meseci, Oprema: CE označba, dokumentacija / priročnik, BPR BA 35 CNC Three-Roller Ring Bending Machine, Hydraulic Technical Data: - Shaft diameter: 35 mm - Roller diameter: on request - Shafts made from high-strength steel, hardened and ground - Drive motor: 1.1 kW, 50 Hz - Hydraulic pump motor: 3 kW - Shaft rotations (variable): 0-30 rpm - Working position: horizontal and vertical - Separate control console - External dimensions: 740 x 1020 x 1110 mm - Control console dimensions: 600 x 710 x 1120 mm - Weight: 490 kg - Hydraulic adjustment of lateral roller - Three driven rollers with smooth surface - Electronic control: BPR Probending CNC - Hydraulic cylinder pressing force: 5,500 kg - Working pressure: 190 bar Accessories included: - Rollers for 1" pipe Fodpfx Apswwt Hferspk - Straightening rollers - Operating keys - Operating manual

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, FACCIN 4HEP 3135 Four-Roll Plate Bending Machine Electronically controlled, hydraulic four-roll plate bending machine Technical Specifications: Number of rolls: Four Side rolls geometry: Lever arm guidance Working width: 3,000 mm Top roll diameter: 350 mm Bottom roll diameter: 330 mm Side roll diameter: 250 mm Installed power (guaranteed): 14.4 kW Maximum rotation speed (guaranteed): 5 m/min Machine weight (guaranteed): 13,000 kg Fpodsiivc Dopfx Aprok Length: 5,700 mm Width: 1,800 mm Height: 2,100 mm Guaranteed Performance Data: For material with yield strength 260 N/mm² Rolling capacity (full working width): 20 mm Pre-bending capacity (full working width): 15 mm Minimum rollable diameter: from 1,750 mm Rolling capacity (full working width): 14 mm Pre-bending capacity (full working width): 12 mm Minimum rollable diameter: from 455 mm Standard Equipment: Lever arm movement of side rolls Extra heavy, double-supported drop end bearing Electronic Parallelism System (EPS) Hardened rolls for high wear resistance Cone bending device Mobile control panel 3 digital position indicators for side rolls and bottom roll Safety trip wire with emergency stop and CE certification

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, New three-roll profile bending machine Roundo R3 with remote control, digital displays, and tooling. Fpsdpfx Aed N Ahdsprjk