Esta Sistem Za Filtriranje In Odsesavanje nakup rabljenega (132.011)

Stanje: rabljeno, Leto izdelave: 1994, Technical details: Required air pressure: 8 bar Total power requirement: 14 kW Approx. machine weight: 80–170 kg per machine MULTIFUNCTION STAMPING AND DRILLING AUTOMATON – ideally suited for aluminium window manufacturing. 3 units: - For Schüco aluminium window frame, mullion, and transom profiles S65 - For Schüco aluminium window sash profiles Royal S 55, S 65, and S 70 systems - For Schüco aluminium door profiles Royal S65 door base profiles - Foot pedal operation - Pneumatic air gun A N D DRILLING AUTOMATON Nsdpfx Ahou Icyhs Ujwg Application: - Drilling automaton for door hinges - Drill holders: for 8 drill bits; for use with 6 countersink drills, diameter 11/15 mm, approx. 80 mm long - Tool clamping by foot pedal, drilling by hand operation - Accessories: various attachments.

Stanje: rabljeno, Leto izdelave: 2016, Technical Details: Nsdpfxovav Sdo Ah Uowg Swing diameter over bed: 402 mm Swing diameter over cross slide: 245 mm Turning length: 1000 mm Centre distance: 1000 mm Centre height: 200 mm Swing diameter in gap: 560 mm Gap width: 120 mm Spindle speeds: 40 - 345 / 345 - 1015 / 1015 - 2800 rpm Feed rate: longitudinal: 0.05 - 0.752 mm/rev cross: 0.025 - 0.376 mm/rev Spindle bore diameter: Ø 42 mm Tailstock taper (ISO): MK4 Tailstock quill stroke: 180 mm Total connected load: 4.1 kW Machine weight approx.: 1.2 t Machine dimensions approx. (LxWxH): 2.4 x 1.0 x 1.7 m The lathe does not feature rapid traverse. Positioning via 2 axes Display via Pinacho Lathe Controller Multifix quick-change tool post with turning tool Coolant system Foot switch Thread cutting possible (metric, Whitworth, module, pitch)

Stanje: rabljeno, Leto izdelave: 1975, Technical Details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 260 mm Turning length: 950 mm Centre height measured in bed: 220 mm Centre distance: 1000 mm Spindle speeds: 11.2 – 2240 rpm / 24 steps Spindle bore: 62 mm Tailstock quill travel: 210 mm Longitudinal feeds: 0.045 – 1.6 mm/rev – 32 steps Cross feeds: 0.02 – 0.71 mm/rev – 32 steps Total power requirement: 11 kW Approx. machine weight: n/a t Approx. machine dimensions (LxWxH): 3.3 x 1.2 x 1.6 m The machine is in very good condition (very quiet spindle operation) and available ex location Leipzig. Top slide swivels 360° 3-jaw chuck Ø 315 mm with jaws (internal/external) for speeds up to 2000 rpm. Thread cutting: metric, module, imperial Chip guard Chuck guard (mechanical) MULTIFIX toolpost with Ø 40 mm boring bar holder Chip tray Nwedpfsv A Sqhox Ah Usg Coolant supply with pump Leadscrew protection Machine feet UVV (accident prevention regulation) pre-installed *

Leto izdelave: 1998, stanje: rabljeno, Technical Details: Temperature: 200-210 °C Conveyor speed: 1000 mm/min Max. workpiece length: 200 mm Total power requirement: 50 kW Machine weight approx.: 2.0 t Convection Reflow Soldering System for PCBs Soldering system for printed circuit boards (e.g. SMD type and/or mixed technology) and drying of SMD adhesives. The soldering system operates with the following functions: Infeed - Preheat - Soldering - Cooling - Outfeed. - with software features - can be integrated into a production line Further technical specifications: - Protective gas with nitrogen: 30 m³/h; 6 - 10 bar overpressure - Water consumption: 20 litres/min; 2 - 5 bar overpressure - Exhaust air volume: 1000 m³/h - Electrical operating power: 12 kW - Space requirements: L:6500 + loading station 2000 x W:1400 x H:2100 mm Additional equipment included: - Automatic stacking unit LSB 03 with reloading head and discharge conveyor for handling e.g. PCBs - Machine is CE98 certified System suitable as a spare parts donor or for conversion/expansion. Sale as is. Offered at a reduced price. Njdpfxeu Rnd De Ah Uowg

Stanje: rabljeno, Technical details: Vertical rapid feed: Z-axis: 1,125 mm Horizontal travel: X-axis: 600 (+1,000 electrically/manual) mm Cross feed: Milling slide Y-axis: 325 (340) mm Control system: Siemens 840D Clamping surface diameter: 3,500/5,800 mm Turning diameter: max. 6,000 mm Rotational speed range, faceplate: 1–12 rpm Spindle speed (milling spindle): 1,000–6,000 rpm Max. workpiece diameter on pallets: 6,000 mm Workpiece weight: 10–2,000 kN Tool holder: HSK-A-100 Total power requirement: 120 kVA Machine weight approx.: 35 t VERTICAL RING AND CYLINDER MACHINING CENTER SPECIAL CNC MACHINING MACHINE Application: Nwedpfxou Idlfj Ah Ueg FOR TURNING, BORING, MILLING, AND GRINDING RING-SHAPED PARTS (large slewing bearings, slewing rings, gear rims, special flanges, and much more.) Machine structure: Two separate main units: Column unit and faceplate/table unit - Feed drives via AC servomotors - Cross movement of milling support Z-axis 325 (max. 340) mm - Faceplate drive power: 76 kW - Table positioning accuracy = 0.02 mm Renewed/Upgraded: - Axis motors replaced (Siemens) - Central lubrication for large slewing bearing of rotary table/spindle expanded - Partial machine rewiring - Accumulator and safety valve in progress.

Stanje: rabljeno, Technical details: Swing over bed: 320 mm Turning length: 800 mm Nwodpfxju Ixy Ds Ah Ueg Distance between centers: 800 mm Center height: 150 mm Spindle bore: 30 mm Speed range: 35 - 1500 rpm / 16 steps Feed range X-axis: 0.04 - 2.4 m/min / 30 steps Tailstock quill stroke: 125 mm Tailstock taper: MT2 Machine dimensions approx. LxWxH: 1.7 x 0.8 x 1.5 m Equipment and additional features: - Röhm 3-jaw chuck 160 mm - Chuck guard - Safety system WxH: 510x400 mm - Multifix tool holder (4 pcs) - Centre in tailstock - Compound slide swivels +/- 45°, maximum travel = 100 mm - Cross slide travel = 300 mm feed - Pump for coolant system (without supply)

Stanje: rabljeno, Leto izdelave: 1960, Technical Details: Nsdpfx Ahou Ix A Eo Uewg Swing diameter over bed: 630 mm Swing diameter over saddle: 320 mm Turning length: 2,800 mm Distance between centers: 2,800 mm Swing diameter in gap: 700 mm Gap length: 450 mm Spindle bore: 70 mm Machine weight approx.: 4.4 t Machine dimensions approx. LxWxH: 4.7 x 1.5 x 1.5 m Thread cutting capability Accessories: 4-jaw chuck Various centers Gears Jaws and small parts Steady rest *

Stanje: rabljeno, Technical details: Material diameter (min-max): Ø 20-30 mm Material length: approx. 70 mm Number of turbines: 3 units Blasting hours: approx. 200 Space requirement: total height approx. 4.5 m Connected load: approx. 40 kW Nwjdpfx Aheu Nu I Te Ueg CONTINUOUS SPRING SHOT BLASTING SYSTEM (SPRING HARDENING) Application: For the blasting treatment/hardening of springs in a continuous process. The springs are conveyed through the blasting system by means of a drag chain which is exposed to the blasting stream. The conveying speed of the drag chain is adjustable. Very little used, approx. 200 operating hours The system consists of: - Machine housing, internal (high-alloy tool steel – hardened) with replaceable blasting plates - Conveyor system - 2 shot chamber maintenance doors - Bucket elevator - Shot chamber length/depth: approx. 2000mm / approx. 670mm - Blast media: steel shot Ø 0.3 – 0.8mm - Material to be processed: springs Ø 20 – 30mm x L:70mm - Drive power of drag chain 1.1 kW - Conveyor speed max. 15 rpm - Initial shot media load approx. 500 kg (per system) - Connected load approx. 40 kW Condition: - without turbine blades (can be retrofitted at extra cost) i.D.

Leto izdelave: 2003, stanje: rabljeno, Tehnične podrobnosti: Nazivna moč: 175 kVA Volumenski pretok: 100 m³/h Število obratov: 1500 obr/min Priključna napetost: 400 V Dimenzije D x Š x V: Kontejner: 3,0 x 2,6 x 2,6 m Naprava za čiščenje plina vključno z 10-futnim kontejnerjem Uporaba: Za čiščenje bioplinov iz organskih silicijevih spojin in vodikovega sulfida. Naprava za povečanje plinskega tlaka, proizvajalec Muche GmbH Nedpou Nvb Iofx Ah Uewg Obseg dobave Aktivno ogleni filter Hlajenje Danvoss; poraba zraka 2.800 m³/h; hladilno sredstvo R 134a Izmenjevalnik toplote Renzmann&Grünwald Kondenzator ID Kompresor MTZ22-4VI Krmilna omara Na voljo kot prikazano.

Stanje: rabljeno, Leto izdelave: 1970, Technical Details: Swing diameter over bed: 325 mm Swing diameter over support: 150 mm Turning length: 1000 mm Turning length, facing: 165 mm / cross: 160 mm Center height over bed: 200 mm Length of gap: no gap mm Spindle speed range: 48 - 1,500 rpm / 10 steps Spindle bore: 40 mm Feeds: longitudinal: 0.021–2.34 mm, cross: 0.09–1.6 mm Tailstock quill taper: MK 4 Tailstock quill travel: 125 mm Total power requirement: 2.2 kW Machine weight approx.: 1.0 t Machine dimensions approx. LxWxH: 2.1 x 0.7 x 1.2 m Thread cutting possible: Metric, Whitworth and module threads Nwedpsu Ixydofx Ah Usg Equipment: - 3-jaw chuck Ø 200 mm with internal clamping jaws - Multifix quick-change tool post - Foot brake - Coolant pump (supply exclusive)

Stanje: rabljeno, Leto izdelave: 2014, Technical Details: Swing diameter over bed: 356 mm Swing diameter over cross slide: 220 mm Turning length: 1000 mm Centre height: 180 mm Distance between centres: 1000 mm Spindle bore: 38 mm Speed range: 45 - 1800 rpm Longitudinal feeds: 0.043 - 0.653 mm/rev, 42 steps Tailstock quill taper: MT3 Tailstock quill travel: 95 mm Total power requirement: 4 kW Machine weight approx.: 0.85 t Machine dimensions approx. (LxWxH): 1.92 x 0.8 x 1.49 m (including display unit) Various accessories Nsdpfx Aow D Dcqjh Uewg

Stanje: rabljeno, Tehnične podrobnosti: Nwedpfoydvfcsx Ah Usg Obratovalne ure: 2151 h Čas vklopa rezkalne glavne osi: 2 h Čas vklopa stružne glavne osi: 709 h Obhodni premer: 1000 mm Stružni premer: 900 mm Maks. višina obdelovanca: 800 mm Krmiljenje: Mazatrol Smoothg os X: 470 mm os Z: 876 mm os C: 20 m/min Držala za orodja / postaje: 12 Hitrost revolverja: 4000 obr/min Teža obdelovanca: 3000 kg Hitri pomik v X- in Z-smeri: 24 m/min Približna masa stroja: 14 t Približne mere stroja (DxŠxV): 3989 x 2375 x 3400 mm

Stanje: rabljeno, Leto izdelave: 1955, Technical details: Swing diameter over bed: 420 mm Swing diameter over cross slide: 240 mm Turning length: 1100 mm Swing diameter in the gap: 600 mm Spindle speed range: 24 - 900 / 8 steps rpm Spindle bore: 41 mm Feed range X-axis: 0.0120 - 0.1000 mm/rev Feed range Z-axis: 0.0062 - 0.0302 mm/rev Tailstock quill taper: MT 3 Tailstock quill travel: 220 mm Total power requirement: approx. 4.0 kW (non-binding) Machine weight approx.: 1.2 t Machine dimensions approx. LxWxH: 2.3 x 0.9 x 1.3 m Equipment: 3-jaw chuck Röhm Ø 200 mm 4-way tool post, swiveling 30° right/left 2x T-slot for copying device Nwjdpfsu Ix D Ajx Ah Ueg Live center

Stanje: rabljeno, Leto izdelave: 1951, Technical Details: Swing over bed: 400 mm Swing over cross slide: 240 mm Turning length: 1100 mm Centre height (measured in bed): 190 mm Spindle bore: 40 mm Speed range: 37.5 - 950 rpm Total power requirement: 3.5 kW Tailstock quill taper: MT 4 Tailstock quill travel: 180 mm Approx. machine weight: 1.6 t Approx. machine dimensions (LxWxH): 2.6 x 1.4 x 1.3 m The lathe is equipped with a thread cutting device. Nedpfxou Ix Hde Ah Uewg It has been rewired and fitted with a new control cabinet. Emergency stop switch and chuck guard 3-jaw chuck, Ø 250 mm Live centre Toolpost: four-way toolholder Compound slide swivels approx. 30° to the right/left Taper turning attachment (taper 15° right/left) 4 change gears included

Stanje: rabljeno, Leto izdelave: 1986, Technical details: Swing diameter over bed: 315 mm Swing diameter over cross slide: 200 mm Turning length: 500 mm Swing diameter over bed: 315 mm Maximum swing diameter over face slide: 200 mm Centre height measured in bed: 180 mm Spindle bore: Ø 32 mm Speed range: 56...2,800 rpm / only 6-step left-right Feed range X-axis: longitudinal: 0.02–0.8 m/min Feed range Y-axis: cross: 0.01–0.4 m/min Tailstock quill taper: MT 4 Tailstock quill travel: 140 mm Total power requirement: 5.5 kW Machine weight approx.: 2.0 t Machine dimensions approx. LxWxH: 2.1 x 1.1 x 1.4 m Nwsdpfx Aeu Ix Hqsh Uog - Workpiece clamping via collet chuck - Travel distances: longitudinal slide = 580 mm, cross slide = 170 mm - incl. tool rest - incl. change gears - Steady rest Ø 100 mm - Four-way toolpost The machine is operating with restricted function! 6 spindle speeds are currently selectable! (224/1800; 280/2240; 355/2800 rpm) Sale as described.

Stanje: rabljeno, Technical details: Nwodpfxsu N Afys Ah Usg Voltage: 360–730 V / 50 Hz Approximate machine weight: 0.150 t

Leto izdelave: 2003, stanje: rabljeno, Technical details: Workpiece length: 130 - 2000 mm Minimum diameter: Ø 10 mm Maximum diameter: Ø 60 mm Control system: Fagor 10/102 S Machine dimensions approx. LxWxH: 3.8 x 3.8 x 1.9 m Control cabinet dimensions LxWxH: 1.2 x 0.6 x 2.2 m Machine weight approx.: 4,500 kg CNC milling and deburring machine for both ends of tubes or round steel. - Material feed via conveyor belt, travel length approx. 3,300 mm - Brush unit type PGAS 8/100 V-HV on both sides/opposed, speed 10,000 rpm (driven by compressed air) - Milling cutter holders, both sides/opposed - Milling spindle and brush holder arranged in sequence - Operation via control panel on the control cabinet Nwjdpfx Aou Ngc Noh Ueg Supports: - 2 units: 1x movable, 1x fixed - Lateral adjustment of right support: length 1,725 mm manually - Working strokes: cross = 5-50 mm; longitudinal = 5-50 mm - Working spindle: max. speed 320 rpm.

Stanje: rabljeno, Leto izdelave: 1998, Tehnične podrobnosti: Nsdpfsu Ngauox Ah Uewg Notranji premer: 63 mm Zunanji premer: 800 - 320 mm Globina brušenja: 380 mm Dimenzije brusnega kolesa: Ø 65 x 25mm (posodasto kolo) Podajalna hitrost: 0,05 - 0,40 obr/min / 8-stopenjska obr/min Skupna potrebna moč: pribl. 1,1 kW Teža cca: 1060 kg Mere stroja cca. DxŠxV: 1,1 x 1,1 x 1,4 m Stružnica in brusilni stroj za zavorne bobne in kolute - Max./min. premer struženja in brušenja: 800 / 320 mm - Vpenjanje zavornega bobna: 63 mm, hod pinole 120 mm - Vzdolžna pomikalna miza: vzdolžna pot 380 mm; prečna pot 200 mm - Nosilec za brušenje: prečni hod 60 mm; motor = hitrost vrtenja 3410 obr/min - Upravljanje preko kontrolne plošče

Stanje: novo, This is a new machine manufactured in Romania by the company Emsil. Customer-specific requirements can be accommodated, depending on technical feasibility, and are reviewed in advance by the manufacturer's engineering department. About the spindles: The Narwhal is equipped with a boring spindle made from hardened, tempered, and alloyed steel. It features preloaded angular contact precision ball bearings. Additionally, the machine is fitted with a milling and boring bar capable of handling exceptional performance and torque. The bar is constructed from nitrided, alloyed steel and also utilizes preloaded angular contact precision ball bearings. Its movement occurs on bronze guide bushings. Both unit clamping mechanisms, responsible for securing and releasing the ISO 50 tool holder taper, operate fully automatically. Rotary Table: Table rotation is achieved via a twin pinion gearbox, a centrally supported shaft, and a hydrostatic sliding block for the central bearing, all engineered to guarantee maximum precision even with heavy, unbalanced loads. A recirculating ball system is used for the X axes. Both axes feature a direct measuring system. CNC Axis Control: All nine axes of the machine are permanently monitored. The monitoring system includes a 15'' TFT screen, operator panel, remote diagnostics which alerts the user in case of any errors, user memory, network connectivity, remote process control, integrated PLC, and more. The machine is compatible with various control systems such as Heidenhain, Fanuc, Siemens, etc. You select the sizes for the machining X/Y and Z axes: from 1200–3500 / 1000–3500 / 400–1500 mm as required! Nwedpfeu Id H Asx Ah Ueg Best regards.

Stanje: rabljeno, Leto izdelave: 1963, Technical details: Swing diameter over bed: 1000 mm Swing diameter over saddle: 620 mm Nwsdpfx Ahou Ix Arj Ueg Turning length: 3150 mm Centre distance: 3150 mm Swing diameter in gap: 1200 mm Length of gap: 800 mm Machine weight approx.: 11.5 t Machine dimensions approx. LxWxH: 7.5 x 1.5 x 1.7 m Including 2 steadies and various centres

Stanje: rabljeno, Leto izdelave: 1974, Technical Details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 300 mm Turning length: 2,100 mm Distance between centers: 2,000 mm Spindle bore: approx. Ø 60 mm Speed range: 35.5 - 1,800 / 18 steps rpm Rapid traverse X-axis: Slide 4.2 m/min Tailstock quill taper: MT 5 Tailstock quill travel: 180 mm Control voltage: 220 V Approx. machine weight: 3.25 t Approx. machine dimensions LxWxH: 3.5 x 1.2 x 1.6 m Thread cutting possible, e.g. metric threads, module threads, and inch threads Cross slide rapid traverse Chuck guard 2x chip pans Accessories: (see comparable on photo) 2x steady rests (1x closed and 1x open) Face plate 3-jaw chuck Nedpfxsu Ix Dce Ah Uowg Jaw sets Flange Centers various gears

Stanje: rabljeno, Leto izdelave: 1975, Technical Details: Swing diameter over bed: 400 mm Swing diameter over carriage: 220 mm Turning length: 1100 mm Centre height: 180 mm Spindle bore: Ø 45 mm Speed range: 31.5 - 1,400 rpm / 12 steps Feed range x-axis: longitudinal: 0.08 - 1.10 m/min Feed range y-axis: cross: 0.028 - 0.40 m/min Tailstock quill taper: MT4 Tailstock quill travel: 200 mm Total power requirement: 4.0 kW Machine weight approx.: 1.7 t Machine dimensions (LxWxH) approx.: 2.5 x 1.1 x 1.4 m Equipment: - Three-jaw chuck Ø 250 mm manufacturer Forkardt with exchangeable jaws - Multifix tool post - Coolant system with pump - Chuck guard - Chip tray - Splash guard Accessories: - Chuck key Nwsdpsu Ix E Hefx Ah Uog - Tool holder - 2 gears

Stanje: rabljeno, Technical details: Weight: Price calculated per kg Various crane runways Item 1: Columns for crane runway 6 pieces double-T beams, length: 4.66 m x width: 22 cm x height: 54.5 cm 1 piece double-T beam, length: 4.71 m x width: 21.5 cm x height: 55 cm Item 2: Crane runway 4 pieces I-beams, length: 7.16 m x width: 22 cm x height: 54.5 cm 2 pieces I-beams, length: 6.25 m x width: 22 cm x height: 54.5 cm 2 pieces I-beam end sections with stopper, length: 6.93 m x width: 22 cm x height: 54.5 cm Nwedju Nvkvopfx Ah Ueg Item 3: Crane runway 4 pieces I-beams, length: 5.90 m x width: 21.5 cm x height: 55 cm 2 pieces I-beams, length: 4.10 m x width: 21.5 cm x height: 55 cm 2 pieces end sections with stopper, length: 6.05 m x width: 21.5 cm x height: 55 cm Item 5: 10 pieces support beams, length 6,400 mm, TT-profile 180 x 180 mm, weight 2,420 kg Subject to prior sale. As long as still available. Please state precisely which beams you are interested in when making your inquiry.

Stanje: rabljeno, Leto izdelave: 1970, Technical details: Swing diameter over bed: 500 mm Njdpevvrpkefx Ah Uowg Swing diameter over cross slide: 300 mm Turning length: 1000 mm Centre height measured in bed: 250 mm Centre distance: 1000 mm Spindle speeds: 18...1800 / 21 step rpm Spindle bore: 56 mm Tailstock quill stroke: 180 mm Longitudinal feeds: 0.08 - 3.26 mm/rev Cross feeds: 0.04 - 1.63 mm/rev Rapid traverse X-axis: 4.2 m/min Total power requirement: 7.5 kW Machine weight approx.: 2.9 t Machine dimensions approx. LxWxH: 2.6 x 1.1 x 1.3 m 4-jaw chuck Ø 250 mm with internal jaws Live centre in tailstock 4-way quick-change tool post Coolant system Accessories: various reduction sleeves MK3-MK5-MK4 Live centre Driving dog 3-jaw chuck Ø 250 mm with internal jaws The machine does not comply with UVV regulations!

Stanje: rabljeno, Technical Details: Swing diameter over bed: 350 mm Swing diameter over cross slide: 200 mm Turning length: 560 mm Centre height: 170 mm Nwsdsvadd Iepfx Ah Uog Spindle bore: Ø 32 mm Spindle speed range: 36...1,800 / 8 steps rpm Feed range x-axis (longitudinal): 0.02..0.8 m/min Feed range y-axis (facing): 0.01..0.4 m/min Tailstock quill taper: MT 4 Tailstock quill travel: 140 mm Total power requirement: 5.5 kW Machine weight approx.: 2.0 t Machine dimensions (LxWxH) approx.: 2.1 x 1.1 x 1.4 m Precision Lathe by Mikromat - Travel of carriage: longitudinal = 580 mm; cross slide = 170 mm; top slide = 130 mm - Workpiece holding via 3-jaw chuck Niles Ø 160 mm, speed 2,800 rpm - Quick-change tool post: Multifix Equipment: Coolant pump 4 machine feet Copying attachment