Elektror Bočni Kanalni Puhalnik 1,2 Kw nakup rabljenega (36.940)

Stanje: dober (rabljeno), Trifazni elektromotor, elektromotor -Proizvajalec: Siemens-Schuckertwerke, elektromotor tip OR624-4 -Moč: 3,0 kW -Število vrtljajev: 1425 min⁻¹ -Gred: Ø 28 x 60 mm Dcsdpfx Acezbif Re Neh -Konstrukcijska oblika: B5 -Razred zaščite: P33 -Dimenzije: 370/290/V250 mm -Teža: 40 kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 13.209 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, širina odprtine za polnjenje: 1.050 mm, dolžina polnilne odprtine: 1.250 mm, širina bale: 1.100 mm, višina bale: 700 mm, teža bale: 500 kg, kapaciteta rezervoarja za olje: 400 l, moč: 15 kW (20,39 KM), leto zadnje generalne obnove: 2025, volumenski pretok: 108 m³/h, Technical data – Baler: Manufacturer as per nameplate: BRAMIDAN (original manufacturer: Presto GmbH & Co. KG) Model: HC 50 (equivalent to Presto HPK 50) Year of manufacture: 2007 Operating hours: 13,209 hours (as of March 2026) Number of bales produced: 23,379 units Press force: 50 t Specific press force: 650 kN/m² Feed hopper dimensions: 1250 x 1050 mm (L x W) Filling volume: 0.96 m³ Theoretical cycle time: 32 seconds Theoretical throughput: 108 m³/h Bale dimensions: 1100 x 700 mm (W x H), length variable Drive power: 15 kW Total power consumption: 50 A Tying: 4-fold vertical, fully automatic Throughput rates at bulk densities of: 30 kg/m³: approx. 3.1 t/h 60 kg/m³: approx. 4.5 t/h 100 kg/m³: approx. 7.2 t/h Bale weights at a bale length of approx. 1.2 m: up to 500 kg, depending on material Hydraulic oil tank capacity: 400 L PLC control: Siemens S7-200 Effective transport dimensions (excluding chute): 6850 x 1950 x 2650 mm (L x W x H) Transport weight (baler): 8.5 t Condition of the baler: The baler was previously used exclusively in a production environment for baling cardboard and has been regularly serviced. With only 13,209 operating hours, the machine has seen comparatively low use. The baler has undergone partial refurbishment and final testing in our workshop. The following refurbishment work was performed: - Machine cleaned - Bale retainer freed and lubricated - Photoelectric sensor renewed - Twisting unit completely disassembled, all bearings and plastic guides replaced, lubricated, and chain tension adjusted - Knives and counter-knives removed, sharpened, and reinstalled - Knife gap re-adjusted - General maintenance work carried out and grease points serviced Scope of delivery: - 1 baler with wire roll boxes, without wire (6850 x 1950 x 2650 mm) - 1 bale chute (5100 x 1150 x 450 mm) Dcsdpfx Aezbxyqsc Nsh - 1 wire roll box for floor mounting (1450 x 380 x 360 mm) A tautliner (curtain side truck) with an effective internal height of 2700 mm is required for transport of the baler. Remarks: Full documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is included. Inspection by appointment possible. We accept no liability for technical data or for possible errors or omissions.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, obratovalne ure: 30.408 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.250 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 550 kg, kapaciteta rezervoarja za olje: 600 l, moč: 22 kW (29,91 KM), leto zadnje generalne obnove: 2025, volumenski pretok: 530 m³/h, For sale is a partially refurbished Presona baler with 50 t pressing force and 22 kW drive power, year of manufacture 2005. Technical Data – Baler: Manufacturer: Presona AB Type: LP 50 EH1 Year of manufacture: 2005 Operating hours: 30,408 hrs (as of April) Number of bales pressed: 198,059 (as of April) Main press force: 50 t Specific pressing force: 63 N/cm² Theoretical throughput: 530 m³/hour Throughput under operating conditions: 260 m³/hour Feed hopper dimensions: 1,250 x 1,100 mm Press chamber volume: 2.2 m³ Bale size: 1,100 x 720 mm, variable length Drive power: 22 kW Tying: 5-fold vertical, fully automatic Throughput at bulk density of: 30 kg/m³: 6–7 t/hour 50 kg/m³: 7–9 t/hour 100 kg/m³: 11–14 t/hour Bale density (paper/newspapers): 400–550 kg/m³ Hydraulic oil tank capacity: 600 L PLC: Telemecanique TSX Micro Control panel: Schneider Magelis Effective transport dimensions without press: 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight (press): approx. 16 t Condition of the baler: The machine has been partially refurbished in our workshop, and general maintenance was performed. After completion of the overhaul, the baler was tested under operating conditions and is available for sale at short notice. Dcsdpjzbxxajfx Ac Neh The following overhaul work was carried out: General work: - Machine cleaned, derusted, primed, partially repainted - Wire run marks in the press channel passages welded and smoothed Hydraulic unit: - Hydraulic oil tank completely drained, tank cleaned, refilled with new oil - Oil filter and air filter replaced - Leaking oil sight glass on hydraulic oil tank replaced - All hydraulic hoses replaced Electrics: - English language uploaded in control menu - Two key switches on the control panel replaced - Control cabinet replaced - Signal lamp on the control cabinet replaced - Limit switch for flap replaced - Wiring of the wirbulator overhauled, connected and tested Press ram: - All four guide rollers on the press ram removed and replaced - Main hydraulic cylinder disassembled, overhauled; cylinder tube honed, full seal kit replaced, leak test performed - All plastic wear pads on the press ram replaced Pre-press flap: - Both bearings on the pre-press shaft replaced - Both hydraulic cylinders disassembled, overhauled; both cylinder tubes honed, full seal kits replaced, leak test performed - Scraper flap on pre-press replaced Tying unit: - Two complete needles with wire deflection rollers replaced - Needles adjusted and set - All wire guide rollers in needle heads replaced - Twister finger replaced - Two twister shafts replaced - All 8 wear plates on the Drillomat, under the twister fingers, replaced Scope of delivery: Only the baler is being sold. The documentation (manual, CE declaration, electrical/hydraulic schematics) is complete. Inspection is possible by appointment. No liability is accepted for technical details or possible errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2000, obratovalne ure: 32.169 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 60 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.320 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 750 kg, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2025, For sale is a complete Bollegraaf baling line consisting of conveyor technology, baler, and wire stations. Technical data - Baler: Manufacturer: Bollegraaf Recycling Machinery B.V. Model: HBC 60A Year of manufacture: 2000 Operating hours: 32,169 hours (as of November 2024) Main press force: 60 t Pre-press force max.: 25 t Feed hopper dimensions: 1,320 x 1,100 mm Theoretical cycle time: 18 seconds Bale dimensions: 1,100 x 720 mm, length variable Drive power: 45 kW Total connected load: 60 kW Tying: 5-fold vertical Throughput performance with bulk density: – 30 kg/m³: approx. 5.5 t/h Dodpfxszbxw Ae Ac Noch – 50 kg/m³: approx. 10 t/h – 100 kg/m³: approx. 16 t/h Bale weights: 400 up to 750 kg, depending on material PLC control: Telemecanique TSX Micro Machine weight (baler): approx. 22 t Scope of delivery: 1 chain belt conveyor 1 Bollegraaf HBC 60A baler with Wirbulator 1 maintenance platform with access ladder 2 wire stations with diverting pulleys for 10 wire spool stands (wire not included) The following repair and maintenance works were carried out: – Hydraulic oil tank fully drained, cleaned, and refilled with new oil – Oil filter and air filter replaced – Some hydraulic block seals renewed – Hydraulic hose at hydraulic block replaced – Wire guides at base passages welded and smoothed – Tying system cleaned and serviced – Electrical system refurbished, some door interlock switches replaced – Wirbulator repaired – General maintenance carried out, greased – Machine tested in ongoing operation, without material, in manual and automatic modes (see function video) Remarks: The system has been completely dismantled, stored, and is ready for immediate loading. Documentation (manual, CE, electrical/hydraulic schematic) is available. Inspection possible by appointment. We accept no liability for technical details or possible errors.

Stanje: rabljeno, Nosilnost: 5.000 kg Višina dviga: 3.300 mm Motor: dizelski Dolžina vilic: 1.200 mm Obratovalne ure: približno 2.003 h Bočni viličar Steinbock Boss tip 556/MK5B-3 za učinkovito transportiranje in zlaganje dolgih tovorov, palet in lesenih materialov v ozkih skladiščnih in proizvodnih prostorih. Robustna konstrukcija omogoča varno rokovanje tudi pri težjih tovorih. Idealno za žage, trgovino z lesom in industrijsko proizvodnjo. Dcsdpfxjxpvr Ej Ac Nsh Težišče tovora: 600 mm Krmiljenje: hidravlično

Stanje: dober (rabljeno), Hidravlični agregat, hidravlična črpalka, univerzalni agregat, hidravlična postaja -Hidravlični agregat: z rezervoarjem za hidravliko -Hidravlična črpalka: tlak do 150 bar -Pretok: 42 l/min Dedpfx Ajzbhdljc Njch -Motor: Lammers 4,0 kW / 1440 obr/min -Rezervoar za hidravliko: s filtrom in prikazovalnikom temperature/nivoja -Posamezne komponente: glej slike -Mere: 630/520/V960 mm -Teža: 206 kg

Leto izdelave: 2021, stanje: novo, Cantilever rack, single-sided, 3.70 m height, 1.20 m arms, 500 kg per arm – new equipment: Price ex location incl. loading! 1 rack unit with 4 uprights: €2,255 (net)! Transport price within Germany (excluding islands): €490 (net)! Of course, by leaving out or purchasing additional frames, you can also build longer or shorter rack units (also by varying the bay spacing); this example with 4 frames is simply the most common rack solution! A hot-dip galvanized cantilever racking system, consisting of: Arms: IPE 80 Frames: IPE 180 Single-sided uprights, approx. 3,700 mm high, hot-dip galvanized Base and arm depth 1,200 mm, each with 3 height-adjustable cantilever arms Load capacity with center of gravity at 600 mm: 500 kg per arm / 2,700 kg per upright With 4 uprights per beam level: 4 x 500 kg = 2,000 kg Supplied with longitudinal and diagonal bracing, pitch = 1,300 mm; standard is 1.30 m – unless otherwise specified, racks will be supplied with a bay spacing of 1.30 m. Other bay spacings available – e.g. 1 m, 1.25 m, and for a small surcharge also 1.50 m or special dimensions! As standard, the length of a racking row with 4 uprights is approx. 4,000 mm. Delivered including all bolts and nuts, without floor anchors. Dcsdpsf Tv T Nefx Ac Noh Other configurations (frame height, arm lengths, arm designs etc.) available! Please contact us!

Stanje: dober (rabljeno), Motor z reduktorjem, elektromotor - Hitrost: 114 obr/min - Moč: 0,75 kW - Konstrukcijska izvedba: B3 kotna - Premer gredi: Ø 20 mm - Zaščitni razred: IP 65 - Razmak lukenj vzdolž/prečno: 80 /100 mm - Cena: na kos - Količina: na voljo 1x - Dimenzije: 430/230/H185 mm Dcododff I Ijpfx Ac Nsh - Teža: 18,7 kg

Stanje: dober (rabljeno), Leto izdelave: 2007, Vakuumska črpalka, rotacijska lopatična črpalka, rotacijska lopatična vakuumska črpalka, tlačno/vakuumska črpalka, rotacijska lopatična tlačno/vakuumska črpalka Djdpfx Acoypcryo Noch - Proizvajalec: Becker, tlačno/vakuumska črpalka tip VTLF 250 - Pogon: AEG 5,5 kW / 950 obr./min - Volumski pretok: 248 m³/h - Sesalni tlak: 200 mbar - Dimenzije: 1200/620/H820 mm - Teža: 288 kg

Stanje: rabljeno, Szczeciniarka Abele -Moč: 2,2 kW -Ima dva valja Dodpeymxldefx Ac Njch -Električni grelci v olju -Zunanje dimenzije: 2300 x 950 x 1230 mm -Delovna širina: 1700 mm -Napajanje: 380V 50Hz 3N -Izdelana iz nerjavečega jekla -Stanje: rabljeno, zelo dobro, pripravljeno za delo

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2009, 🔥 FOR SALE: 2x Fröling Turbomat 500 kW Cascade System – Total Output 1000 kW 🔥 ✔ 2x Fröling Turbomat 500 kW ✔ Total output: 1000 kW ✔ Fully automatic wood chip heating system ✔ Lambda control + negative pressure control ✔ Moving feeder grate ✔ Automatic cleaning and ash removal ✔ 4-pass heat exchanger with automatic WOS cleaning system ✔ Integrated multi-cyclone dust separator ✔ Water-cooled feed channel ✔ Heavy-duty industrial construction Suitable for: - Wood chips - Pellets - Sawdust - Biomass fuels 📦 Included in the price: - 2x boilers - 2x feed augers - 2x pumps - 2x return flow mixers - 2x control cabinets / control units - Return flow elevation up to shut-off - Ash discharge augers ❌ Not included: - Walking floor discharge - Ash containers 🔧 Dismantling: - 16.06 – 17.06.2026 - Dismantling included in the price - Loading by crane directly through the roof opening Dsdpfxey Rfa Rj Ac Njch 🚛 Loading: - 18.06.2026 - Crane firmly booked from 07:00 to 10:00 - Transport and truck organization to be handled by the buyer ⚠ The buyer’s truck must be on site before crane operations begin. Any additional crane hours due to late truck arrival must be paid for directly onsite by the buyer. Márton Pauker Top Heating Systems BEN & JAK KFT 📞 🌐

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €160,788 Leasing rate: €3,038.89 Laser power: 3 kW Max. sheet thickness - mild steel: 12 mm Max. sheet thickness - stainless steel: 6 mm Max. sheet thickness - aluminum: 6 mm Max. sheet thickness - copper: 3 mm Max. sheet thickness - brass: 6 mm Total connected load: 26.5 kW Max. tube diameter: 250 mm Min. tube diameter: 16 mm Max. dimensions for square profiles: 160 x 160 mm Max. dimensions for rectangular profiles: 200 x 150 mm Max. profile length: 6,000 mm Max. profile weight: 58 kg/m Positioning accuracy: +/- 0.2 mm Repeatability: +/- 0.05 mm Profile types: round, square, rectangular Max. X-axis speed: 40 m/min Max. Y-axis speed: 94 m/min Max. Z-axis speed: 30 m/min Max. A-axis speed: 510 °/s The system includes the following components: - Enclosed cutting area with safety glass - CNC graphic control with touchscreen - Brilase 3 kW premium laser source incl. chiller - Cutting head with automatic focus adjustment Djdowiqr Aopfx Ac Noch - Manual loading - Manual unloading table, 3 m - Positioning laser - Central lubrication - Scrap container - CAD/CAM software with autonesting - Work area lighting PRICE FCA TURKEY OPTIONS: - Extraction unit with filters - Semi-automatic front loading system - 6 m unloading table with conveyor unit - Durma Cloud license - Laser source with 4 or 6 kW (on request)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2015, obratovalne ure: 5.849 h, nosilnost: 5.000 kg, dvižna višina: 5.500 mm, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 2.600 mm, vrsta pogona: Diesel, Four-way side loader Dsdoy Sqfuspfx Ac Nech Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Fork positioner,

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, obratovalne ure: 642 h, nosilnost: 3.000 kg, dvižna višina: 6.420 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 3.510 mm, dolžina vilic: 1.200 mm, vrsta pogona: Elektro, Štirismerni stranski viličar Tip droga: Triplex Stanje: Pripravljen za uporabo in popolnoma delujoč Tehnično stanje: dobro Dcsdpfx Acoy Sqfne Nsh Leto izdelave baterije: 2026 Nastavljalec vilic,

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2016, obratovalne ure: 138 h, nosilnost: 3.000 kg, Štirismerni bočni viličar Dcsdou Acuzspfx Ac Noh Stanje: Pripravljen za uporabo in popolnoma delujoč Tehnično stanje: dobro Opis: Malo rabljena prečnik za Combilift CB2500 in CB3000

Stanje: dober (rabljeno), Reduktorski motor, elektromotor - Hitrost: 55 vrt/min - Moč: 0,37 kW - Izvedba: B3 kotna Dodpocwl A Esfx Ac Njch - Premer votle gredi: Ø 24 mm - Stopnja zaščite: IP 54 - Količina: 1 motor na voljo - Teža: 12,8 kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, leto zadnje generalne obnove: 2025, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main ram pressing force: 100 t Pre-pressing force: 50 t Operating hours: 22,605 hours Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Total connected load: 126 kW Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 16 t/hour bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Djdpfevf E Avox Ac Noch Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Notes: The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced - Material guides and wear plates on sides and base of press ram removed and rewelded - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced - Both wire deflection units left and right, with bale retention clamps completely replaced - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed - General maintenance and servicing carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Nudimo obnovljene turbine iz kontinuirnega peskalnika Rösler RRB 22/5-L. Tip turbine - Hurricane H42. Turbine so obnovljene z originalnimi rezervnimi deli iz orodnega jekla. Peskalnik, stroj za peskanje, peskanje, metanje, mečeča turbina. Dcodpfeyy Rybjx Ac Njh

Stanje: novo, Leto izdelave: 2025, ♻ Model SD 45 odlikujejo nizka priključna moč, visoka produktivnost, enostavna uporaba in dolga garancijska doba ✔ Moč: 15 kW ✔ Dolžina rotorja: 430 mm ✔ Premer rotorja: 160 mm ✔ Hitrost rotorja: 265 rpm ✔ Število nožev: 15 ✔ Granulacija: 10-50 mm ✔ Kapaciteta: do 1,5 m3/h* ✔ Odprtina za ekstrakcijo: 152 mm Dcsdpfx Acoic U Dio Neh ✔ Material: Plastika, karton, les (iverne in MDF plošče, itd.) ✔ Vsipna odprtina: 620x430 mm ✔ Dimenzije D/Š/V: 0,95/1,08/1,91 m ✔ Teža: 920 kg 4 leta garancije ali 2000 delovnih ur

Stanje: novo, Leto izdelave: 2026, ♻ Univerzalna uporaba (les razni, palete vključno z žeblji in sponkami, iverne plošče in ostanki, furnirji, MDF-plošče, karton, plastika …) ✔ Moč: 30 kW ✔ Dolžina rotorja: 870 mm ✔ Premer rotorja: 270 mm ✔ Hitrost rotorja: 80-120 rpm ✔ Število nožev: 38 ✔ Granulacija: 10-50 mm ✔ Kapaciteta: do 8 m3/h* ✔ Vsipna odprtina: 2031 x 1565 mm ✔ Dimenzije D/Š/V: 3,21/1,97/2,04 m Djdpfsiq U Ayjx Ac Nsch ✔ Teža: 2450 kg 2 leti garancije ali 2000 delovnih ur

Stanje: novo, Leto izdelave: 2024, ♻ Univerzalna uporaba (les razni, palete vključno z žeblji in sponkami, iverne plošče in ostanki, furnirji, MDF-plošče, karton, plastika …) ✔ Moč: 18,5 kW ✔ Dolžina rotorja: 870 mm ✔ Premer rotorja: 270 mm ✔ Hitrost rotorja: 80-120 rpm ✔ Število nožev: 2x19 ✔ Granulacija: 10-50 mm ✔ Kapaciteta: do 7 m3/h* ✔ Odprtina za ekstrakcijo: 200 mm Djdjhzlr Iopfx Ac Njch ✔ Vsipna odprtina: 1446 x 1565 mm ✔ Dimenzije D/Š/V: 2,15/1,97/2,04 m ✔ Teža: 2050 kg 2 leti garancije ali 2000 delovnih ur

Stanje: novo, Leto izdelave: 2024, ♻ Univerzalna uporaba (les razni, palete vključno z žeblji in sponkami, iverne plošče in ostanki, furnirji, MDF-plošče, karton, plastika …) Dedpfx Ashwwpzec Nech ✔ Moč: 22 kW ✔ Dolžina rotorja: 650 mm ✔ Premer rotorja: 270 mm ✔ Hitrost rotorja: 80-120 rpm ✔ Število nožev: 2x14 ✔ Granulacija: 10-50 mm ✔ Kapaciteta: do 5 m3/h* ✔ Odprtina za ekstrakcijo: 160 mm ✔ Vsipna odprtina: 1446 x 1342 mm ✔ Dimenzije D/Š/V: 1,92/1,55/1,79 m ✔ Teža: 1750 kg 2 leti garancije ali 2000 delovnih ur

Stanje: novo, Leto izdelave: 2024, ♻ Univerzalna uporaba (les razni, palete vključno z žeblji in sponkami, iverne plošče in ostanki, furnirji, MDF-plošče, kartonaža, plastika …) ✔ Moč: 18,5 kW ✔ Dolžina rotorja: 550 mm ✔ Premer rotorja: 260 mm ✔ Hitrost rotorja: 80-120 rpm ✔ Število nožev: 14 ✔ Granulacija: 10-30 mm ✔ Kapaciteta: do 4 m3/h* ✔ Odprtina za ekstrakcijo: 160 mm ✔ Material: Plastika, karton, razne vrste lesa (iverne plošče, MDF plošče, ostanki,...) ✔ Vsipna odprtina: 939 x 567 mm ✔ Dimenzije D/Š/V: 1,88/1,12/1,67 m ✔ Teža: 1250 kg Dcjdpfx Acsiq U A Sj Nsh 2 leti garancije ali 2000 delovnih ur

Stanje: novo, Leto izdelave: 2024, ♻ Univerzalna uporaba (les razni, palete vključno z žeblji in sponkami, iverne plošče in ostanki, furnirji, MDF-plošče, karton, plastika …) ✔ Moč: 30 kW ✔ Dolžina rotorja: 870 mm ✔ Premer rotorja: 270 mm ✔ Hitrost rotorja: 80-120 rpm ✔ Število nožev: 2x19 ✔ Granulacija: 10-50 mm ✔ Kapaciteta: do 7 m3/h* Dedpoiq U D Esfx Ac Njch ✔ Odprtina za ekstrakcijo: 200 mm ✔ Vsipna odprtina: 1446 x 1565 mm ✔ Dimenzije D/Š/V: 2,15/1,97/2,04 m ✔ Teža: 2050 kg 2 leti garancije ali 2000 delovnih ur

Leto izdelave: 2024, stanje: novo, ♻ Univerzalna uporaba (les razni, palete vključno z žeblji in sponkami, iverne plošče in ostanki, furnirji, MDF-plošče, karton, plastika …) ✔ Moč: 22 kW ✔ Dolžina rotorja: 870 mm ✔ Premer rotorja: 270 mm ✔ Hitrost rotorja: 80-120 rpm ✔ Število nožev: 38 ✔ Granulacija: 10-50 mm ✔ Kapaciteta: do 8 m3/h* ✔ Vsipna odprtina: 2031 x 1565 mm ✔ Dimenzije D/Š/V: 3,21/1,97/2,04 m Dedpfxoiq Uz He Ac Noch ✔ Teža: 2450 kg 2 leti garancije ali 2000 delovnih ur