Eillert Vrtič Za Solato nakup rabljenega (84.470)

Stanje: rabljeno, Zračni kondenzator iz amoniakove hladilne naprave z največjo močjo 180 kW. Stroj (dodatno): Hladilnik Moč na ventilator: 2 kW Lokacija / položaj: za montažo na prostem na lokaciji Osnovna konstrukcija: Ohišje z ventilatorji in hladilniki Oprema: 3 ventilatorji, glavno stikalo Alpin Cjdpfexzqtujx Ahxegt

Stanje: rabljeno, Leto izdelave: 2007, Prominent water treatment system, consisting of: 1. Softening: Raw water is supplied to the twin softener. Only one vessel is in operation at a time, while the other is in regeneration or on standby. In the softener, calcium and magnesium ions are replaced by sodium. The system is equipped with a volume counter, which switches to the other vessel once the preset quantity has been reached. Regeneration is carried out with brine from the brine tank. The residual hardness at the outlet is 0 °dH. 2. Reverse Osmosis: The reverse osmosis unit fills the permeate tank with demineralized water (permeate). Depending on raw water quality, water temperature, membrane condition, and correct system settings, different conductivity levels and operating pressures are achieved. Upon commissioning, the following flow rates are set: permeate 600 l/h, concentrate 200 l/h, corresponding to a yield of 75%. 3. Permeate Tank and Ozonation: The non-pressurized 500 l permeate tank is equipped with adjustable level control. For ozone treatment, the water in the permeate tank circulates through an adjustable ozone dosing point. Ozone is produced by the ozone generator via silent electrical discharge from air and is available as an ozone/air mixture. Air and un-dissolved ozone rise to the top of the permeate tank and are discharged via the residual ozone destructor. For monitoring, redox potential and ozone measurements are taken downstream of the centrifugal pump. Ozone dosage is set via the touch panel. Control can be selected by either redox potential or ozone concentration. Cgjdpfx Ahew Uvdgjxjt Additional machine information: water softening, reverse osmosis unit, ozone disinfection Permeate output: 600 l/h Concentrate output: 200 l/h Ozone output: 5 g/h Max. operating pressure: 16 bar Power: 2 A Voltage: 230 V Frequency: 50 Hz Water supply: < 5 bar (cooling water) Compressed air: 5.5–6.5 bar (max. 10 bar); max. 0.37 Nm³/h Operation/control: Simatic S7-300, touch panel Installation: free-standing Base frame: fully assembled on pipe frame with dished ends Equipment: reverse osmosis unit, reaction tank complete with residual ozone destructor, ozone generator, ozone gas warning device, ozone and redox transmitters, control cabinets with PLC/control system

Stanje: rabljeno, Leto izdelave: 2004, Za neprekinjeno proizvodnjo degazirane vode. Stroj (dodatno): Degazacija vode Cgsdpfx Ahsxw R Rxsxjt Kapaciteta: 50 hl/h Vsebnost O2 po odzračevanju: 0,5 ppm Temperatura: 16 °C Tlak: 4 bar Moč: 1,0 kW Napetost: 380 V Frekvenca: 50 Hz Upravljanje / krmiljenje: Popolnoma avtomatsko / krmilnik S7 Material: Okvir: 1.4301, cevovodi: 1.4404 Oprema: Vodna linija (pnevmatski loputni ventili, merilnik pretoka, povratni ventil, ventil za odvzem vzorcev), membranski moduli (vstop vode od spodaj), CO2-linija (loputni ventil, redukcijski ventil, merilnik pretoka, ročni regulacijski ventil), vakuumska linija (loputni ventil, vakuumska črpalka (ELMO), ročni regulacijski ventil), ploščni toplotni izmenjevalnik (Thermowave), visokotlačna črpalka (Hilge, 4,5 bar pri 250 hl/h, 7,5 kW motor)

Stanje: rabljeno, Stroj (dodatno): Reverzna osmoza Permeatna zmogljivost: 8000 l/h Cedpfoxzqulsx Ahxegt Dovod: 10000 l/h Pretok koncentrata: 2000 l/h Maks. delovni tlak: 16 bar Moč: 6,5 kW Napetost: 3 x 380 - 415 V Frekvenca: 50 Hz Voda: Dovod 2,5 - 5 bar Upravljanje / Krmiljenje: Simatic S7-300 Osnovna konstrukcija: na okvirju iz nerjavečega jekla Oprema: filtracija za dezinfekcijo; dve cevi z membranskimi moduli; doziranje kemikalij z dvema dozirnima črpalkama; centrifugalna črpalka (Lowara); različne cevi, ventili in merilna tehnika; električna omarica z zaslonom na dotik.

Stanje: rabljeno, Single-use PET bottling line, comprising the following components: - Crate ejectors (crate emptiers, Gera GmbH, 20 ejector units in a 4x5 arrangement) for 0.5-liter bottles - Crate ejector for 1.0-liter bottles (Gera, 2003) - Crate washer with cleaning nozzles - Stretch blow molding machine (SIG, Blomax 18 model, year 2003, with 18 cavities) - Air conveyor for PET bottles (Convair, 2001) - Extraction system (2003) - Air conveyor (KHS Innoline, 2003) Cjdpfxeyr N Ute Ahxsgt - Premix system (Procomac Starmix CM, 2001, 250 hl/h) with water deaeration, mixer, and carbonation, with a total of 4 tanks - Velcorin dosing system (dmt, Burdomat II G) - Cap applicator and cap conveyor system (Procomac, 2005) - PET bottle rinser, filler, and capper (Procomac, 2001) - Labeling machine (P.E. Futura, 2001) for hotmelt wrap-around labels, in block with laser date marking (Videojet, 2017, with extraction) and label box (2005) - Labeling machine (KHS Roland, 2009) - Best-before date detection unit (2011) - Air knife drying system for bottles (2017) - CIP system (Procomac, 2001) with 3 tanks of 20 hl each - Free, powered conveyors for bottles and crates Machine (Additional info): Single-use bottling Capacity: 16,000 bph Packing patterns: 0.5-liter single-use PET bottles, 20-bottle crates Equipment: bottle ejector, crate washer, 2 x stretch blow molding machines, premixer, Velcorin dosing, cap handling and conveying, rinser/filler/capper, labeling machine, date marking, packer, best-before date detector, bottle air knife, bottle air conveyor, extraction system, CIP system, free crate and bottle conveying.

Leto izdelave: 1988, stanje: rabljeno, Machine (Additional Information): Stainless steel tanks with temperature control Total capacity (gross): 904 hl Cjdjvcqg Iepfx Ahxegt Material: Stainless steel Equipment: 3 fermentation tanks (1 x 554 hl, 2 x 175 hl), 1 yeast tank (37 hl), integrated temperature control system (Nerb)

Stanje: rabljeno, Leto izdelave: 1990, Polnilni stroj za približno 8000 steklenic/uro Stroj (dodatno): stroj za polnjenje in zapiranje Zmogljivost cca: 8000 steklenic/uro Formati: 0,5 l euro steklenica, 0,33 l longneck steklenica, 0,5 l steklenica s preklopnim zamaškom Postavitev: prosto stoječa Cgsdsw S T H Topfx Ahxjt Oprema: 1 pred-evakuacija, polnjenje s kratko cevjo, zapiralec kronskih zamaškov

Stanje: rabljeno, Leto izdelave: 1993, Joha stroj za pakiranje zabojčkov Stroj (dodatno): Pakirni stroj za zabojčke za steklenice Kapaciteta cca: 400 zabojčkov/h Moč: 1,5 kW Tok: 3,5 A Napetost: 400 / 230 V Položaj: prostostoječi Cedpsw S T Nbsfx Ahxogt

Stanje: rabljeno, Leto izdelave: 2014, GERNEP etiketirni stroj Tip stroja: Etiketiranje s hladnim lepilom Moč: 8 kW Tok: 16 A Napetost: 400 / 230 V Frekvenca: 50 Hz Stisnjen zrak: 5 bar, poraba 42 m³/h Dolžina: 2100 mm Širina: 1600 mm Višina: 2100 mm Formati: 0,5 l steklenica z obročem in vzvodnim zamaškom, 0,5 l Euro steklenica; 0,33 l longneck steklenica Smer delovanja: z desne na levo Cjdjw S Udgspfx Ahxogt Upravljanje / Krmiljenje: Siemens S7-200 Postavitev: samostoječi Oprema: 0,5l steklenica z vzvodnim zamaškom: vzvod/telo/hrbet; 0,5l Euro: čelna/telo/hrbet; 0,33l longneck: vratni obroč/telo/hrbet Teža: 2300 kg

Stanje: rabljeno, Leto izdelave: 1996, Etiketirni stroj za sprednje, trebušno in hrbtno etiketiranje steklenic iz stekla. Stroj (dodatno): Sprednje, trebušno in hrbtno etiketiranje steklenic Kapaciteta: 40.000 steklenic/uro Dolžina: 2.600 mm Širina: 2.800 mm Višina: 2.700 mm Formati: različne etikete mize 0,5L NRW, 0,33L Vichy, 0,33L Euro Smer teka: levo -> desno Upravljanje / Krmiljenje: Simatic OP7-panel, Krones KES 5 Cgsdpfow Taugox Ahxst Postavitev: prostostoječa

Stanje: rabljeno, Leto izdelave: 2000, Flaschenfüller Hersteller: Fa. Krones Kurzrohrfüller mit doppelter Vorevakuierung Modell: Mecafill VKVP 084-094 Baujahr: 2000 Der Verschließer läuft mit Twist off und Standard-Kronkorken. Maschine (Zusatz): Abfüll- und Verschlußmaschine Leistung: 30000 Fl/h Länge: 7000 mm Breite: 4500 mm Höhe: 3800 mm Formate: 0,5L NRW, 0,33L Vichy, 0,33L Euro, 0,35L Limonade; Maschinenteilung: 84 Füllventile, 12 Verschliesser Codpjw Tay Aofx Ahxjgt Laufrichtung: rechts -> links Bedienung / Steuerung: Simatic ET 200 M Material: überwiegend Edelstahl Lage / Position: frei stehend Basiskonstruktion: Vierkant-Rahmenkonstruktion auf Kalotten Ausstattung: 1 Verschliesser für Standard- und Twist Off-Kronkorken, 84 Füllventile, 12 Verschliesser, Schutzgehäuse mit Glastüren, Vakuumpumpe Peripherie: Kronkorkenzuführung, Füllstandskontrolle,

Stanje: rabljeno, Leto izdelave: 2013, 2-valjna drobilnica z zalogovnikom za drobljeni slad in 2 cevno-verižnima transporterjema. Zmogljivost za prevzem slada in drobilnico približno 500 kg/h, zmogljivost transporta drobljenega slada do mešalnika približno 1000 kg/h. Stroj (dodatek): z zalogovnikom in cevno-verižnima transporterjema Zmogljivost transporta slada približno: 500 kg/h Zmogljivost drobilnice približno: 500 kg/h Zmogljivost transporta drobljenca: 1000 kg/h Prostornina zalogovnika za drobljenec približno: 450 kg Postavitev/pozicija: postavljeno na ravni tleh, drobilnica nameščena na zalogovniku Cjdpfx Ajw Tdygehxegt Oprema: 1 cevno-verižni transporter od silosa do drobilnice, 1 cevno-verižni transporter od zalogovnika do kuhalnega kotla, 1 drobilnica za slad, 1 zalogovnik za drobljenec.

Leto izdelave: 2013, stanje: rabljeno, Etiketirni stroj Labetta 4/3/10 640 A SK je zasnovan za etiketiranje različnih vrst steklenic. Stroj (dodatek): Etiketiranje s hladnim lepilom Zmogljivost/ciklus: 7.000 kozarcev/uro Moč: 8 kW Cjdpfx Ajw Tlmujhxogt Električni priklop: fiksni priklop Napetost: 400/230 V Frekvenca: 50 Hz Stisnjen zrak: 5 bar, poraba 42 m³/h Dolžina: 3.100 mm Širina: 2.200 mm Višina: 2.200 mm Oprema: Etiketirni stroj Herma 400S Periferija: 2 inšpektorja – D x Š x V = 1,30 x 0,85 x 1,70 m – 300 kg Teža: 3.200 kg

Stanje: rabljeno, Toplo izpiranje praznih steklenic od spodaj s šobami na 3-metrski čistilni progi za predpranje in dosego temperature polnjenja. Obrat steklenic na glavo na vstopu in izstopu iz stroja. Opremljen z vodnim rezervoarjem, grelcem in obtočno črpalko. Z dozirnimi priključki za nego vode. Stroj (dodatno): Predčiščenje steklenic z grelnim vodnim rezervoarjem Cedpfx Asw Tmmpjhxegt Kapaciteta polnilne linije: 5.000 steklenic/h Dolžina čistilne proge: 3 m Oprema: Obratnik steklenic; vodni rezervoar z grelcem, obtočna črpalka in dozirni priključki

Leto izdelave: 1992, stanje: rabljeno, Stroj (dodatek): 6 hladilnih rezervoarjev Kapaciteta: 164 hl Obratovalni nadtlak: 0 bar Cgedpfew Tmqzex Ahxst Širina: ca 2,05 m Višina: ca 6,2 m Položaj / postavitev: Pokončno Osnovna konstrukcija: Na nogah Oprema: Človekova odprtina, 2 hladilni coni, ventil za vzorčenje, varnostni ventil z indikatorjem tlaka, vakuumski ventil.

Stanje: rabljeno, Leto izdelave: 2006, Industrijski robot za nakladanje in razkladanje palet s polnimi in praznimi zaboji. Nosilnost 360 kg, s šestimi osmi in sklepno kinematiko za vse točkovne in tirne naloge krmiljenja. Vključno s programirno ročno napravo za celoten dialog z robotskim krmiljenjem. Stroj (dodatek): Nakladanje in razkladanje palet Kapaciteta: 3000 zabojev/uro Nosilnost: 360 kg Dolžina: 2,20 m Širina: 1,40 m Višina: 2,60 m Formati: Euro paleta EUR1 Upravljanje / Krmiljenje: Programirna ročna naprava Oprema: Klemm glava; brezvzdrževani AC servomotorji Cedsw Tmq Iopfx Ahxegt Teža: 2400 kg

Stanje: rabljeno, Rezervoar za usedanje lužine: 1 stoječi cilindro-konični rezervoar, prostornina: 13.600 l, z izolacijo in alu trapezno pločevinasto oblogo Prostornina: 13.600 l Cgodpew Uc Dysfx Ahxot

Stanje: rabljeno, Leto izdelave: 2015, Elektronsko nadzorovan dvojni sistem za mehčanje vode brez delcev. Z dvema tlačnima posodama iz GFK. Prosto nastavljivi cikli z regeneracijo glede na čas ali količino. Z rezervoarjem za solnico. Stroj (dodatno): dvojni sistem z GFK-posodami, mehčanje z ionsko izmenjevalno smolo Obratovalni tlak: 8 bar Obratovalna temperatura: 40 °C Napetost: 230 V Frekvenca: 50 Hz Material: GFK-posode Oprema: predfilter, blok ventilov, vodomer, 2 x GFK-posoda, razne cevi Cgjdpfx Aow U D S Eohxet

Stanje: rabljeno, Leto izdelave: 2007, Stroj (dodatek): Zapiralec za steklenice z žico Zmogljivost: 18.000 steklenic/uro Oprema: nastavitev višine, nadzorni sistem za pritisk zapiranja, mehansko/pnevmatsko preverjanje napetosti žice, visokotlačna vbrizgalna naprava, izpiranje in spiranje. Cgsdexbpdxopfx Ahxet

Stanje: rabljeno, Leto izdelave: 1991, Machine (additional details): 50,000 bph, crown cork Rated output: 50,000 bottles/hour Formats: 0.33 l longneck, 0.5 l NRW bottles; crown cork Codpfx Ahevcqr Rjxogt Running direction: right to left Operation / Control: Siemens S5 Base design: level-controlled filler with return air tube Equipment: 120 filling stations, 24 capping stations, double pre-evacuation, high-pressure injection

Leto izdelave: 1991, stanje: rabljeno, Machine (additional): Stainless steel tanks for wheat beer fermentation Total capacity (gross): 465 hl Cgjdpfx Ahjvcq Dgoxjt Equipment: 2 upright tanks (1 x approx. 150 hl, 1 x approx. 160 hl), 1 horizontal tank (155 hl), 1 mobile yeast vat, dedicated temperature control system

Stanje: rabljeno, Leto izdelave: 1986, Fermentation cellar with 4 coolable stainless steel tanks. Tanks 1-3: C. Gresser, 1986, gross volume 20,460 liters each. Tanks are mounted on four legs and each feature two shell cooling zones, dished ends (Klöpperböden), and central outlet. Equipment per tank includes: safety valve, cleaning line, CIP spray head, sampling tap, manway in the shell, and sight glass in the tank dome. Tank 4: C. Gresser, 1986, gross volume 11,569 liters. Tank is mounted on four legs with shell cooling, dished ends, and outlet line. Equipment: cleaning line, CIP spray head, sampling tap, manway in the shell. Additional machine data: Coolable stainless steel tanks 3 tanks of 20,500 liters each 1 tank of 11,600 liters Material: stainless steel Mounting/position: standing on four legs Equipment: cooling jackets, cleaning lines, CIP spray heads, outlet lines, safety valves, sampling taps, manways, and sight glasses Cgsdpjvcq Dtofx Ahxet

Stanje: rabljeno, Leto izdelave: 2005, Shrink Tunnel Machine (additional information): with 2 parallel conveyors (including sleeve position control) Air volume: 700 m³/h Speed: 900 rpm Power: 0.25 kW Length: 3 m Cgedpsvcq E Defx Ahxot Width: 1.25 m Height: 2.1 m Operation / Control: one screen for each conveyor belt Features: Two parallel lanes running from two sleeving machines through the system, optical sleeve position monitoring with belt stop function Weight: 500 kg

Leto izdelave: 2001, stanje: rabljeno, Combined rinser and filler for 0.5 l, 1.0 l, and 1.5 l PET bottles. Capacity: 24,000 bottles/h. The rinser is connected to a chlorine dioxide dosing system and a sterile water supply. The filler is equipped with a screw capper. Filling volume is controlled via flow measurement. Liquid nitrogen dosing is possible via a mobile unit. Cgedox T Andopfx Ahxet Machine (additional info): PET bottle cleaning and filling line Capacity: 24,000 bottles/h Formats: 0.5 l, 1.0 l, and 1.5 l PET bottles Flow direction: left → right Operation / Control: Touch panel / Simatic S7 Material: predominantly stainless steel Configuration: free-standing Equipment: stainless steel enclosure, upward-opening plexiglass safety screen; 70 rinsing valves at the rinser; 80 filling valves; fill-level monitoring via IDM; Alcoa 28 mm Bericap capper; Prominent chlorine dioxide dosing; sterile water filtration unit, mobile liquid nitrogen dosing unit; pneumatic screw cap feeder (approx. 25 m); 2 basements for a total of 3 mesh box pallets.

Stanje: rabljeno, Returnable glass bottle filling line for mineral water and soft drinks, consisting of the following components: Cgodpfx Aheyxnd Ijxot - Depalletizer with pallet infeed (Schaefer, approx. 1989) - Unpacker (KHS with modification by Paxona) - Crate washer for crate rinsing - Cap remover (Adelski) - Bottle washing machine (Krones, 2001) inline machine - Empty bottle inspector (Krones) with reject system and glass crusher - Glass bottle short-tube filler (Krones, 2002) with cappers for crown corks and screw caps + closure inspection - Labeller (Krones, 2009) for cold glue application of paper labels + label inspection - Packer (KHS with modification by Paxona) - Palletizer (Schaefer, approx. 1989) - Free transport system for bottles and crates - CIP (Cleaning-In-Place) system with 3 tanks - Premix unit Machine (additional info): Returnable line; years of manufacture approx. 1989–2012 Output: 11,800 bottles/h based on 1.0 l bottles Formats: 0.33 l; 0.5 l; 0.8 l; 1.0 l; – screw caps and crown corks Operation/control: Krones Equipment: pallet infeed; depalletizer; unpacker; crate washer; cap remover; bottle washing machine; glass bottle filler and capper; closure inspection; labelling machine; label inspection; packer; palletizer; free crate and bottle conveyor; CIP system; premix unit.