Dvigalo Z Dvojnim Nosilcem (Mostno Dvigalo) nakup rabljenega (47.950)

Stanje: rabljeno, Leto izdelave: 2018, DEMAG mostno dvigalo – Nosilnost 16 ton – Letnik 2018 Proizvajalec DEMAG Cranes & Components GmbH – Nemčija Tip Industrijsko motorizirano mostno dvigalo – enojni ali dvojni nosilec Industrijska uporaba Za težka dviganja v jeklarnah, proizvodnih delavnicah, kotlarstvih, splošni strojni obdelavi in logističnih skladiščih Glavne tehnične specifikacije: - Nazivna nosilnost: 16 ton (16.000 kg) - Leto izdelave: 2018 - Proizvajalec: DEMAG – globalni vodilni v industrijskem dviganju - Motorizirano premikanje po tirnicah Ksdpfx Alsxb D Nvs Njlr - Električni vitel z jeklenico (DEMAG standard, velika nosilnost) - Napajanje: industrijski trifazni tok - Upravljanje: obesek ali radijsko daljinsko upravljanje (odvisno od konfiguracije) - Stanje: rabljeno – nedavno, robustna zasnova 🧩 Uporaba stroja DEMAG mostno dvigalo z nosilnostjo 16T je zasnovano za težka dviganja v zahtevnih industrijskih okoljih. Velika nosilnost ter sodobna konstrukcija zagotavljata učinkovitost, varnost in dolgo življenjsko dobo. ⚙️ Značilnosti / prednosti - Srednje visoka nosilnost (16T) za težje industrijske procese - Sodobna izdelava (2018) skladna z aktualnimi varnostnimi standardi - Vgrajeni DEMAG vitel in električni sistemi - Možnost integracije avtomatizacije in daljinskega upravljanja

Stanje: rabljeno, Leto izdelave: 1998, številka stroja/vozila: PS1, KONE žerjavna konstrukcija - žerjavna tirnica z dimenzijami pribl. 5 x 6 m (6 m most) Kedoxcg Nbopfx Al Nolr Nosilnost / dvižna teža: 500 kg - 0,5 t Tehnični podatki naprave: Naprava se dostavi v celoti: Tirnice, spojke tirnic, vozički, končne plošče, nosilci/obešala itd. (Pogoni vozičkov so odklopljeni, verjetno okvarjeni – ročno premikanje je brez težav možno!) Vklj. 500 kg verižni dvig – višina dviga pribl. 4,5 m Žerjav je razstavljen in takoj na voljo Rabljeno stanje, glejte slike Lokacija artikla je 75053 Gondelsheim Dostava preko špedicije ali osebni prevzem po dogovoru Demag KBK1, KBK2 in KBK3 tirnice so na zalogi! Na voljo so tudi druge KBK naprave. Nosilnost 125 kg - 1600 kg Za nezavezujočo ponudbo za žerjavno konstrukcijo z zahtevano nosilnostjo in dimenzijami nas prosim kontaktirajte.

Stanje: rabljeno, Leto izdelave: 1985, številka stroja/vozila: KA, Demag indoor crane, gantry crane, bridge crane incl. steel structure + floor control Steel structure approx. 10 x 3.5 m with Demag KBK I crane runway with one bridge Payload/lifting capacity: 1x 125 kg, incl. 1x 80 kg Demag PK Manulift chain hoist Technical data of the system: Crane runway/steel construction consisting of HEB 100 beams Length (outer edge of steel structure): approx. 9.5 m Total width (outer edge, steel structure): 3.45 m Inner edge of steel structure: 3.3 m Total height of steel structure/crane: 3 m Column height approx. 3 m with base plate Bottom edge of running rails: 2.7 m Top edge of bridge: 3.95 m Bottom edge of bridge: 2.45 m Hook height: 1.75 m (Manulift) Track gauge: approx. 3 m Rail length: approx. 10 m Column spacing: See sketch (4.75 m + 4.75 m) Ksdjw Hniyopfx Al Nslr System is delivered as a complete package: Complete steel structure with columns Demag KBK 1 system incl. chain hoist Crane is dismantled and available immediately Location: 75053 Gondelsheim Very good condition, see pictures Shipping by freight forwarder or pickup only by appointment

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2011, številka stroja/vozila: WIL190, Demag EEPOS Gis Overhead Crane Portal Crane Bridge Crane incl. Steel Structure + Pendant Control Steel structure approx. 15.35 x 7.2 m with EEPOS ALU crane runway, featuring two bridges each with 350kg capacity Load capacity/lifting capacity of crane: 2x 350kg Incl. 1x Gis chain hoist 500kg + 1x Demag DC chain hoist NL 250kg, year 2023! Technical data of the system: Klodpfxsxcg Dle Al Nsr Crane runway/steel construction consisting of HEA180 beams Length outer edge of steel structure approx. 15.35m Total width outer edge (steel structure): 7.2m Inner edge steel structure: 6.83m Overall height steel structure/crane approx. 5.03m Column height approx. 5.03m with base plate Underside purlin: 4.83m Top of bridge approx. 4.32m Underside bridge approx. 4.02m Hook height approx. 3.65m Track gauge approx. 5.5m Rail length approx. 17+19m Bridge length approx. 6.4m Column spacing: See drawing (6.85m + 8.5m) System is delivered complete: Steel structure including columns EEPOS aluminum crane runway incl. 2x chain hoists (profile types XL+V) Crane is dismantled and available immediately Location: 75053 Gondelsheim Very good condition, see pictures Shipping via freight carrier or pickup by appointment only.

Stanje: rabljeno, Električni verižni dvig, elektro dvigalo, žerjav STAHL tip R 12 Tovarniška št.: 3437532 Leto izdelave: 1979 Nosilnost: 1250 kg Premik kljuke: 2,4 metra Hitrost dviga pri eni verigi: 8 m/min Fina hitrost dviga pri eni verigi: 2 m/min Hitrost dviga pri dveh verigah: 4 m/min Fina hitrost dviga pri dveh verigah: 1 m/min Kledjdz Sp Ispfx Al Nor 2 verigi = 1250 kg Moč motorja: 1,25 / 0,25 kW Priključek: 380 V, 50 Hz - brez verižne vreče - Voziček za KBK 2 - dvonosilni mostni žerjav Voziček brez 4 KBK koles V dobrem stanju

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Beam Extensions for Gantry Cranes – Expand the Reach of Your Crane Beam extensions are professional accessories for gantry cranes that allow for an increase in the working width of the structure. They are used wherever the standard width of the crane is insufficient—particularly in wide halls, warehouses, and industrial facilities. Made from durable and resilient materials, they ensure reliability and long service life even in demanding work environments. Enhanced Functionality and Safety Beam extensions allow for easy adaptation of the crane to individual requirements, expanding its range of applications without the need to purchase a larger unit. The maximum lifting capacity of the crane with extensions is 800 kg. However, please note that when the extension exceeds 200 mm, the lifting capacity is further reduced. Therefore, it is crucial to follow the manufacturer’s guidelines and regularly inspect all crane components, including the extensions. Key Product Features: - Enable quick and safe increase of the crane’s working width - Simple installation – the set includes two ready-to-mount extensions - Robust construction – high-strength steel profiles - Safe operation – compliant with industrial standards and OHS regulations - Compatible with CORMAK gantry cranes and other structurally compatible models Operating Guidelines: Gantry crane extensions should be used strictly according to the manufacturer’s recommendations, particularly regarding the potential reduction in load capacity. The minimum extension width is 200 mm, and any additional increment further limits the maximum lifting capacity. Regular technical inspections and proper maintenance are necessary to ensure full operational safety. Kljdpfx Alsycqh Ns Ner Application of Beam Extensions: This product is ideally suited for industries such as logistics, industrial production, steel structure assembly, the automotive industry, and more. Its versatility, durability, and quality make it an excellent choice for companies seeking equipment flexibility and reliability. By choosing CORMAK beam extensions, you are investing in efficiency, functionality, and safety. Expand your crane’s capabilities and adapt it to evolving production or warehouse needs! Technical specifications: Length: 520 mm Width: 131 mm Height: 70 mm Quantity per set: 2 Set weight: 20 kg

Leto izdelave: 1993, stanje: rabljeno, Pressure: 63 t Stroke: 10–80 mm Stroke rate: 65–400 strokes/min Ram adjustment: 80 mm Table area: 1030x550 mm Ram area: 920x450 mm Pass-through opening in table: 700x200 mm Installation height (bottom, ram adjustment top): 420 mm Klsdpfx Aslp U E Rjl Nor Machine weight approx. 10 t Double-column design, Double connecting rod, IMCO press force measuring system, Central lubrication Automatic stroke adjustment Motorized ram adjustment Wanzke decoiler Rotary gripper feeder

Leto izdelave: 1978, stanje: rabljeno, Pressure 40 t Upright spacing 600 mm Stroke 150 mm Table size 600x410 mm Kedpoq Rhkwsfx Al Nslr Ram surface 220x130 mm Table height 850 mm Machine weight approx. 2.5 t BWS for protective and automatic operation Stroke/pressure cut-off Fixed stop adjustment Double-column design

Stanje: rabljeno, Leto izdelave: 1992,

Leto izdelave: 1981, stanje: rabljeno, Pressure: 20 t Stroke: 8–38 mm Strokes per minute: 100–1800 Table surface: 400 x 400 mm Kodpfx Ajlp U Nmsl Njlr Table opening: 380 x 80 mm Table height: 1000 mm Machine weight: approx. 4 t Space requirements (WxDxH): approx. 1600 x 1600 x 3100 mm Machine number: 6068

Leto izdelave: 2008, stanje: rabljeno, Pressure: 315 t Stroke: 40–200 mm Stroke rate: 20–100 strokes/min Slide adjustment: 120 mm Slide area: 2000x1100 mm Bolster area: 2000x1200 mm Die opening in table: 1700x250 mm Shut height (bottom), slide adjustment top: 500 mm Side frame window: 820x650 mm Total power requirement: 45 kW Machine weight: approx. 44 t Hydraulic clutch-brake combination Hydraulic overload protection in slide Semi-automatic stroke adjustment Motorized slide adjustment Stroke rate frequency-controlled Central grease lubrication for guides Oil circulation lubrication Slide counterbalance cylinders Safety doors front/rear Hydraulic die clamping system Extendable bolster plate Hydraulic rollblock strips in table Feed unit: Helmerding EWH800/150 (V-1341-6518) Strip width: 100–800 mm, strip thickness: 0.5–6.0 mm, max. strip cross-section: 1600 mm² Loop control, height adjustment via geared motor Straightener: R-70/800/9-S (R-1343-6518) Strip width: 100–800 mm, strip thickness: 0.5–4.0 mm, Max. strip cross-section: 1600 mm² at 450 N/mm² Straightening speed, frequency-controlled up to 25 m/min Strip introduction aid: transfer table with hydraulic separating wedge, hydraulically adjustable Hold-down hydraulically adjustable Strip edge guidance: 1 pair of lateral roller guides, adjustable via handwheel Feed rollers: 2x rollers Ø140 mm, pneumatically adjustable Straightener: 9x rollers Ø70 mm, adjustment manual via handwheel Decoiler: HE-4/800/MOT/HYD (H-1342-6518) Strip width: 100–800 mm Max. load: 4 t Coil inner diameter: Ø508 mm Coil outer diameter: Ø1000–1600 mm Drive, frequency-controlled Limiting arms Hydraulic expansion Hydraulic hold-down arm Kljdsrdi Dljpfx Al Njr

Leto izdelave: 1995, stanje: rabljeno, Pressure: 125 t Stroke: 10–80 mm Strokes per minute: 240 spm Ram adjustment: 80 mm Table surface: 850 x 600 mm Ram surface: 760 x 550 mm Kledpfslp U Nqjx Al Nor Pass-through opening in table: 850 x 130 mm, adjustable Table height: 1100 mm Pin hole in ram: Ø 50 mm Total power requirement: kW Machine weight: approx. 13 t Required space (LxWxH): approx. 3000 x 2000 x 3300 mm Pneumatic clutch-brake combination Manual ram adjustment Manual stroke adjustment Machine number: 212341 Centralized oil lubrication Roll feed: Alba GVHY300 Straightening machine: Soprem BRM 19/150/16/U

Stanje: novo, Leto izdelave: 2025, Druck 75 t Hub 8-80 mm Hubzahl 80-200 Hub/min Stößelverstellung 70 mm Tischfläche 900x600 mm Stößelfläche 900x470 mm Durchfallöffnung im Tisch 450x180 mm Durchgang zw. den Ständern - seitlich 500x350 mm Durchgang zwischen den Säulen (seitlich) 788 mm Gesamtleistungsbedarf 10 kW Maschinengewicht ca. 10 t Raumbedarf ca. BxTxH 1600x1200x2800 mm Öl-Umlaufschmierung Hydraulische Überlastsicherung, einstellbar Stößelausgleichszylinder Presskraftüberwachung, einstellbar Thermische Lagerstellenüberwachung Pneumatische Kupplungs-Bremskombination Pneumatische Schutztür, vorne Lichtvorhang Schutzbetrieb vorne Flügeltür, schwenkbar, hinten 8x Werkzeugsicherung frei programmierbar 8x elektronische Nocken frei programmierbar Förderbandansteuerung Verteilerkasten 400V/230V Arbeitsraumbeleuchtung LED Schnittstelle Bandanlage Rollblockleisten im Tisch, mechanisch Klsdpjxh Swuofx Al Nor

Leto izdelave: 1981, stanje: rabljeno, Pressure: 63 t Stroke: 6–60 mm Strokes per minute: 90–550 spm Installation height (table bottom to ram adjustment top): 300 mm Table area: 780 x 600 mm Ram area: 807 x 460 mm Ram pin hole diameter: 40 mm Ram adjustment: 80 mm Total power requirement: 15 kW Machine weight approx.: 8 t Klodpfx Aslp U R Iol Nor Space requirement (WxDxH): approx. 2900 x 2000 x 3000 mm Oil central lubrication IMCO press force measuring device

Leto izdelave: 1964, stanje: rabljeno, Pressure: 40 t Gap width: 450 mm Stroke: 20–50 mm Ram adjustment: 60 mm Table surface: 370 x 400 mm Ram surface: 250 x 370 mm Through-hole in table: 120 x 280 mm Table height: 850 mm Machine weight: approx. 2.5 t Space requirements (WxDxH): approx. 1600 x 1300 x 2800 mm Kjdpfx Alelp U Exe Nslr PIV gearbox Mechanical overload protection in ram Mechanical feed

Stanje: rabljeno, Leto izdelave: 2008, stiskalna sila: 300 t, širina mize: 1.000 mm, dolžina mize: 2.000 mm, skupna dolžina: 4.000 mm, skupna širina: 3.000 mm, skupna višina: 4.000 mm, nastavitev hoda: 200 mm, Oprema: varnostna svetlobna zapora, Ponujamo rabljeno AIDA 300 ton ULX ekscentrično stiskalnico z dvojnim ogrodjem, letnik 2008. Proizvajalec: AIDA Model: 300 Ton ULX Sila stiskanja: 300 ton Leto izdelave: 2008 Stanje: rabljeno ID kategorije: 1329 Kodpfsytcwwjx Al Njlr ID tipa: 871 Tip stroja: ekscentrična stiskalnica z dvojnim ogrodjem Od prvega lastnika podjetja Stroj je v odličnem stanju in v obratovanju Vedno uporabljan pod svojo kapaciteto Uporabljen le v eni izmeni od nakupa do danes Izdelano v Aida Japonska Prva ULX stiskalnica v Evropi Dobavni pogoji: EXW Eskisehir, Turčija Plačilni pogoji: gotovina ali akreditiv Za dodatna vprašanja ali več informacij nam pišite ali nas pokličite.

Stanje: novo, Leto izdelave: 2024, Genie GS4390 diesel scissor lift with all-wheel drive, new, used, and demo machines available Klodpforh Emtsx Al Ner

Stanje: novo, Leto izdelave: 2024, Genie GS3369DC electric scissor lift, new, used, and demo machines available Kledpfx Aevm U Scel Nsr

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: omejena funkcionalnost, premer diska: 525 mm, Weight approx. 1,900 kg Dimensions (LxWxH) approx. 1,800 x 1,500 x 2,200 mm Lapping plate diameter 525 mm Kjdpfx Aljh Invro Nslr Maximum lapping ring width 175 mm Maximum workpiece size 170 mm Lapping plate speed 45/70/90/140 rpm Main drive power 4.0 kW Connection 400V/50Hz Emergency stop switch Conventional control with operator panel Full-featured lapping machine, conventional control

Stanje: novo, Leto izdelave: 2024, Pressure 75 t Stroke 8–80 mm Strokes per minute 80–200 spm Ram adjustment 70 mm Table area 900x600 mm Ram area 900x470 mm Table through-hole 450x180 mm Clearance between uprights (lateral) 500x350 mm Passage between columns (lateral) 788 mm Total power requirement 10 kW Machine weight approx. 10 t Space requirement approx. WxDxH 1600x1200x2800 mm Oil circulation lubrication Adjustable hydraulic overload protection Ram counterbalance cylinder Kedpfx Ajvfxl Rjl Nelr Adjustable press force monitoring Thermal bearing point monitoring Pneumatic clutch-brake combination Pneumatic safety door, front Light curtain safety operation, front Swing door, rear 8x programmable die protection circuits 8x programmable electronic cams Conveyor control Distribution box 400V/230V Work area LED lighting Interface for coil line Mechanical roll block rails in table Elmea coil line, consisting of: - Elmea decoiler 3 t - Elmea straightener 300x3 mm - Elmea roller feeder 300x3 mm Safety fence system for coil line

Stanje: rabljeno, Leto izdelave: 2020, številka stroja/vozila: 001646U en 001647U, For sale 2x used Demag single girder overhead cranes 13,325 mm x 10,000 kg. These two cranes have been installed together in the same hall and are equipped with tandem control. We can optionally supply the cranes including: * Installation and inspection * Conductor rails * Radio remote control * Master-master controls Jan Reiling B.V. also supplies new cranes, fully customised, at highly competitive prices. * Overhead bridge cranes * Suspension cranes * Jib cranes * KBK track cranes * Boat lifts All our new and used cranes delivered with installation come with warranty! In addition, we have our own stock of approx. 15,000 Demag spare parts. For more information, please visit the website of Jan Reiling B.V. Cranes, crane, overhead crane, workshop crane, warehouse crane, hoist, cranes, hall cranes, bridge cranes, workshop cranes, storage cranes, lifting equipment, cranes, universal crane, hoist. Klodpfxeya Ag Ss Al Nor Overhead crane, overhead travelling crane. Single girder, single-girder, single beam. Chain hoist, chain hoists.

Stanje: dober (rabljeno), Leto izdelave: 1995, Double-girder overhead crane, bridge crane, indoor crane, assembly crane, workstation crane, overhead travelling crane, travelling crane, crane system -with 2x electric wire rope hoists Klodpfx Aljb A Ny Ee Njr -Lifting capacity: 2x 1,600 kg -Bridge lifting capacity: 3.2 t -Span: 6.4 m -Floor control -Dimensions: 2000/6400/H1000 mm -Weight: approx. 2,000 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 6.400 kg, Overhead Crane – 2 x 3,200 kg – KONE – Industrial Grade For sale: a robust overhead crane from an industrial environment, suitable for heavy-duty and daily operations in workshops, production halls, steel construction, recycling, or maintenance facilities. This crane system is a double girder overhead crane, offering high lifting capacity combined with precise control. Key Features • Crane manufacturer / system: KONE Klodpfxeyffh Ao Al Nor • Type: Overhead crane (double girder) • Lifting capacity: 2 x 3,200 kg • Total possible capacity: 6,400 kg (depending on lifting equipment configuration) • Equipped with electric trolley / hoist • Controls: pendant push-button control • Application: suitable for heavy industrial use • Construction: steel crane runway with overhead configuration This crane has been used in a technical setting and is engineered for continuous industrial operation. Ideal for moving heavy machinery, steel structures, concrete elements, installations, or material flows within a hall. — Advantages ✔ Very strong and stable double girder construction ✔ Suitable for professional applications ✔ Reliable industrial quality ✔ Ready for immediate use in workshop or production setting — Further Specifications (to be updated) The following data will be added soon: • Span (crane runway width) • Runway length • Lifting height • Year of manufacture • Technical documentation / inspection • Dismantling and transport options — Viewing by appointment possible. Dismantling and transport to be arranged by agreement. Interested or have questions? Please feel free to contact us.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, 3 units complete DEMAG single-girder hoist trolleys with hoist DH316 H12 Load capacity: 6.3 t Reeving: 4/1 Hoisting motor: KBH140 B2/12 Main hoist speed: 6.3 m/min Creep hoist speed: 1.0 m/min Kedpfx Asv Uvn Ijl Njlr Hoist gearbox ratio: i=85 Trolley: Travel motor KBF80 A8/2 / Gearbox AF04 i=14.1 with DEMAG DST pendant control station and main crane connection box Price is per unit; when purchasing 3 units, each €3,900 Good condition Info: 20,000 DEMAG spare parts and components in stock! demag parts warehouse

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, GEARBOX SET Part Number 82452533 DH1000 3-stage i=112.3 4 units DEMAG DH1000 gearboxes in top, as-new condition Original price each: €21,920.00 net, now €6,900.00 net each when buying all 4 units, single unit €7,990.00 net 4 units Plug-in Shaft / Shaft DH1000, new Original price each: €1,700.00 net, now €990.00 net each when buying all 4 units, single unit €1,290.00 net Thousands of DEMAG spare parts in stock Free shipping within Germany! Info: Over 30,000 DEMAG spare parts and components in stock! DEMAG crane parts warehouse Kjdpfx Asv T Ti Tjl Nelr