Demag Ergotech 1000/1400 - 11500 nakup rabljenega (12.173)

Stanje: dober (rabljeno), Daljinsko upravljanje žerjava, krmiljenje žerjava, krmiljenje žerjavske naprave, viseča komandna omarica, krmilno stikalo, ročna komandna enota - Proizvajalec: Demag, krmilno stikalo za daljinsko upravljanje žerjava s kablom - Tip: DST 6 - Priključek: 16-polni - Daljinsko upravljanje žerjava: posamezno 2 stopnji pod stikalom - Transportne mere: 870/360/V140 mm - Teža: 6,1 kg Gisdpfx Afoxzqp Ajwjt

Stanje: rabljeno, Daljinski upravljalnik za žerjav, krmiljenje žerjava, upravljanje žerjava, viseče stikalo, krmilno stikalo, ročna upravljalna omarica - Predaja: v obstoječem stanju, kot je bilo pregledano, glejte fotografije Gedpfx Asxzq Sqofwjit - Stanje: manjkajo preklopni elementi, glejte fotografije - Proizvajalec: Demag, krmilno stikalo daljinskega upravljanja žerjava s kablom - Tip: DSE - Priključek: 16-pinski - Transportne mere: 600/330/V140 mm - Teža: 3,5 kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2021, portalna dvigalka 2x35 ton, razpon 25 ali 28 metrov Gsdpfoggggpox Afweit

Stanje: rabljeno, Leto izdelave: 2003, Gantry crane 2x12.5 tons, 28-meter span Gisdjf Dzqyjpfx Afwst Drive and hoisting units by Demag Frequency-controlled crane travel.

Stanje: zelo dobro (rabljeno), 2 kosa enakih DEMAG dvižnih naprav / elektro verižnih dvigal P625 H8 2/1 nosilnost 5 t in P35 H8 2/1 nosilnost 5 t. Z mikrodvigom FG24 in spodnjim kavljem 5 t. Giodpfx Asv T Twkofwet Oba sta bila sočasno generalno obnovljena avgusta 2003! Od takrat skladiščena, brez dokumentacije, vendar je tip menjalnika označen na tipni ploščici.

Stanje: novo, 4 nove DEMAG vodila za vrv P200 P400 P600 Gedpfxoyyvggj Afwsit P1000 novo

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, dvižna višina: 12.000 mm, nosilnost: 25.000 kg, DEMAG dvigalo DH1063 H24 25 ton Giodpfxjyyvczj Afwet 4/1 Glavni motor za dvigovanje KBH200 B6 Glavni menjalnik DH1000 i= 50 Fini hod FG10 Dvigalo v rabljenem, dobrem stanju, preizkušeno za delovanje

Stanje: novo, Komplet 12 kosov DEMAG vodil za vrv 3x DH300 / DH400 82280233 3x DH500 / DH600 82380233 3x DH1000 / DH1200 82480233 Giodpjyyvbkjfx Afwjt 3x DH1600 / DH2000 82565033

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, dvižna višina: 6.000 mm, nosilnost: 3.200 kg, DEMAG EKDR 3 voziček popolnoma opremljen s dvižnim mehanizmom in pogonskim motorjem ter vsemi kabli / voziček za vlečno napeljavo / dovod / krmilno stikalo (zadnja slika). Letnik 2007, Navijanje 4/1 Prenos i=67 Nosilnost 3200kg 6m/min in 1m/min Gedpfxjyyu S Uo Afweit Zelo dobro stanje Veliko vozičkov na zalogi, tudi v drugih velikostih.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1980, dvižna višina: 7.000 mm, nosilnost: 3.200 kg, 2 kosa enakih DEMAG dvigal P416 H7, letnik 1980 Gisdpfxjyyum Eo Afwjt Na voljo so tudi vsi rezervni deli za P-Zug Vrsta vrvne sheme 2/1 Nosilnost 3,2 t Dvignjena višina kljuke 7 m Glavna hitrost dviganja 8 m/min Fina hitrost dviganja 0,8 m/min

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, dvižna višina: 10.000 mm, nosilnost: 5.000 kg, DEMAG enotirna vozička z dvižnim mehanizmom DH312 H12 4/1 i=65 Giedpfx Afjyyulzjwet Nosilnost 5000 kg V dobrem, rabljenem stanju

Leto izdelave: 2019, obratovalne ure: 17.716 h, stanje: pripravljen za uporabo (rabljen), Splošni podatki Širina: 1920 cm Globina: 7750 cm Teža stroja: 26.210 kg Višina: 2410 mm Ta električni stroj za brizganje SUMITOMO SHI DEMAG El-Exis SP 350/820-920 je bil izdelan leta 2019. Robusten električni stroj za brizganje s premerom polža 40 mm in zapiralno silo 3.500 kN. Deloval je 17.716 ur in izvedel 12.440.761 ciklov, kar omogoča obsežne proizvodne zmogljivosti. Razmislite o nakupu električnega stroja za brizganje SUMITOMO SHI DEMAG El-Exis SP 350/820-920. Za več informacij nas kontaktirajte. Gisdpfox D Nx Ijx Afwst Vrsta uporabe Brizganje plastike

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, obratovalne ure: 96.986 h, vpenjalna sila: 600 kN, premer vijaka: 30 mm, This hydraulic injection moulding machine, model DEMAG ET60-200 concept, was manufactured in 2003. It features a clamping force of 600 kN and a maximum mould weight of 580 kg. The machine is equipped with a robust injection unit featuring a screw diameter of 30 mm and an injection pressure of 1900 bar. Take advantage of this opportunity to purchase the DEMAG ET60-200 concept hydraulic injection moulding machine. Contact us for further information. • Clamping unit: • Tie bar spacing (H x V): 420 x 420 mm • Platen dimensions (H x V): 530 x 540 mm • Min. mould installation height: 210 mm • Opening stroke: 400 mm • Max. mould weight: 580 kg (moving side 380 kg / fixed side 200 kg) • Ejector: • Stroke: 125 mm • Force: 41 kN • Retraction force: 15 kN • Pneumatic ejector: Yes Gjdjyg Nfujpfx Afwjit • Core pull control: Yes (2 units, on ejector side/ES) • Injection unit 1: • Unit size: 200 • Screw diameter: 30 mm • Injection pressure: 1900 bar • Shot volume: 106 ccm • Shot weight (PS): 94 g • Screw L/D ratio: 20 • Nozzle radius: 15 mm • Armoured/wear-resistant injection unit: Yes • Process control: SPC (Yes) • Note: Maximum crane load warning: 2 tonnes Additional equipment • Robot / parts removal device: W621-1381 • Strokes: Y 1200 mm, X 550 mm, Z 1500 mm • Hot runner controller: integrated 7-zone control • Tool sensors: Kistler (p=1/t=0)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, obratovalne ure: 15.642 h, premer vijaka: 45 mm, skupna višina: 2.213 mm, skupna masa: 15.750 kg, This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection molding machine, ideal for precise plastics processing. Take advantage of the opportunity to purchase this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection molding machine. Contact us for further information. Additional Equipment • Fanuc robot Machine Advantages Qualitative Machine Advantages • Process data acquisition, mold protection Technical Machine Advantages • Minimum mold height: 350 mm / maximum mold height: 745 mm • Electronic main connection: 3/400 V 50 Hz • Programmable process, high dynamic feed speed, hydraulic pressure-dependent holding pressure control, digital/wear-free position measuring system. Additional Information Standard Equipment: Support of the moving platen via linear guides/ Short/long stroke ejector/ Interface for external printer (hardcopy)/ Individual axis motion optimization (activeAdjust)/ Four-stage mold closing and four-stage mold opening process/ Increased pump drive power II (59.0 kW)/ Mains voltage 400 V ±10% / 50 Hz, 3-phase + N + PE/ Separate mains connections for drive/heating/ Color data display/ Reinforced oil cooler (cooling water supply up to 35 °C)/ Separate water connections for mold and machine cooling/ Basic version Europe/ Corrosion protection/ Paintwork: Jet black (RAL9005): machine bed with installations, lower control cabinet/ Signal white (RAL9003): clamping unit, injection unit, nozzle protection/ Signal white (RAL9003): fixed safety devices, upper control cabinet/ Signal white (RAL9003): safety doors/ Structured Surfaces: Elastic machine mounts/ Digital and wear-free position measuring system (ultrasonic/high-resolution encoder for injection, mold, and ejector movement)/ Mold connection dimensions Type E (according to EUROMAP March '96)/ Centering diameter fixed platen: 160 mm/ Centering diameter moving platen: 160 mm/ No side ejector plate/ Standard Mold Installation Height: Min: 350 mm/ Max: 745 mm/ Standard closing speed (movements only when safety door closed)/ Gsdpfex D Hntox Afwsit Ejector with position control (P/F+V independently programmable, parallel to mold movement)/ Oil lubrication of toggle lever/ Injection unit/ Optional Equipment: Speed-controlled pump Servo Technology (activeDrive)/ Emergency stop switch on operator side/ Separate opener for fine filtering in bypass (activeCool&Clean)/ Socket 1 x Schuko (230V / 10A), switchable via main switch/ Socket IECEE 3Ph / 400V-16A, switchable via main switch/ Warning light/ Operation with safety door open (operator side)/ 6 pneumatic 5/2-way valves on moving platen (programmable)/ 6 pneumatic 5/2-way valves on fixed platen (programmable)/ Central maintenance unit for pneumatic valves/ Core pull 1-circuit via proportional valve (programmable, with check valves)/ Manual pressure relief for core pull 1-circuit/ Operator-side safety guarding extended (250 mm)/ Hot runner control 12 zones, integrated (2.75 kW)/ Pneumatic hot runner nozzle control (1x 5/2-way valve)/ Clamping force regulation/ Active mold protection via sensor when closing (activeQ)/ Manually adjustable monitoring switch for mold open position/ Central grease lubrication (manual)/ Material hopper for automatic filling/ Hopper shut-off with discharge option/

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 27.551 h, vpenjalna sila: 2.200 kN, skupna višina: 2.100 mm, This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It is an electric injection moulding machine renowned for its precision and efficiency. Ideal for anyone looking to expand their production capabilities with reliable technology. Contact us for further information. Additional Equipment • Sepro robot SDR 22 Machine Advantages Technical Machine Specifications • Screw diameter: 45 mm / screw geometry: standard / l/d ratio: 20 / specific injection pressure: 2150 bar / max. shot volume: 329 cm³ / max. shot weight: 293 g / injection rate without accumulator: 254 cm³/s • Metering stroke: 207 mm / max. nozzle stroke: 450 mm / nozzle immersion depth: 20 mm / nozzle contact force: 58 kN / number of heating zones: 4 / hopper capacity: 50 l / max. injection speed: 160 mm/s • Clamping force: 2420 kN / max. opening stroke: 550 mm / min. mould height: 300 mm / max. mould height: 580 mm / max. platen distance: 1130 mm • Platen size (h x v): 880x830 mm / tie bar spacing (h x v): 610x560 mm / ejector stroke: 150 mm / ejector force: 58 kN • Dry cycle time according to Euromap 6 (stroke): 427 mm • Net weight without oil: 10,100 kg Dimensions Giedpfx Afex D Hnyewst Machine depth: 6460 mm

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 injection moulding machine was manufactured in 2005. It features a central accumulator for high-speed injection and chrome-plated tie bars. The pump drive power is 22.0 kW, operating at a mains voltage of 400 V / 50 Hz. The machine is equipped with a colour data display featuring a VGA interface, an oil cooler, and an electric screw drive. Please inquire about the possibility to purchase this hydraulic injection moulding machine SUMITOMO SHI DEMAG El-Exis S 250/630-1450. Contact us for further information. • 5 similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mould movement • Chrome-plated tie bars at the clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate power connections for drive and heating • Control system: colour data display with VGA interface and AT keyboard interface • Injection, holding pressure and back pressure via servo valve • Reinforced oil cooler Giedox D Rqropfx Afwst • Separate water connections for mould and oil cooling • Compliance: basic European version, conforms to applicable safety regulations • Paint finish: bottom anthracite grey RAL 7016; upper section blue 571C MD • Elastic machine suspension • Ultrasonic position measuring system with digital data transmission for injection, ejector, mould (M) and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centring diameter (D=100/125) for the fixed platen • Mould mounting dimensions type E (similar to EUROMAP), without side ejector plate • Standard mould installation height • Safety interlock: mould opening and ejector forward only with safety gate closed • Ejector with position control via proportional valve; pressure and speed can be programmed independently • Frequency-controlled electric screw drive

Leto izdelave: 2019, stanje: pripravljen za uporabo (rabljen), This DEMAG Systec 210/580-840 was manufactured in 2019. It is a hydraulic injection moulding machine with a clamping force of 210 tons and a power rating of 60 kW. The machine has been in operation for 31,132 hours. Consider the opportunity to purchase this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Please contact us for further information. • The dosing unit (orange part) is not included. • Integrated country-specific socket combination • Can be switched off via the main switch and shutdown program • 2 x Schuko 1Ph/230V/16A; 2 x IECEE 3Ph/400V/16A residual current circuit breaker Gijdpfjx D Nluox Afwst • Pneumatic 5/2 valve no. 1 on the movable mould mounting platen; • Programmable, supplied via central air connection • Includes hoses. Inputs and outputs freely programmable; 3 inputs and 3 outputs; • Terminal point located outside the control cabinet • Interface for additional nozzle heating band; socket only • 2-circuit core pull via solenoid valve on the movable mould mounting platen; operation independent of clamping force (programmable); • With pilot-operated check valves to prevent core creep • Mould connection dimensions E (similar to Euromap March 96) • With side-mounted ejector plate, centering diameter of the fixed platen: 160 mm • Centering diameter of the moving platen: • Mold installation height increased by 100.0 mm • Min: 340 mm • Max: 790 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, obratovalne ure: 8.000 h, vpenjalna sila: 500 kN, premer vijaka: 25 mm, injekcijska masa: 46 g, skupna višina: 1.779 mm, skupna masa: 4.200 kg, This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Included with the machine are a granulate dryer, an industrial robot, a conveyor belt, and temperature control units. Ideal for high-quality injection moulding processes. Please contact us for more information about this machine. Additional Equipment • Granulate dryer • Handling system • Conveyor belt – 1400 mm x 400 mm Gisdpfx Afox D Eccowjt • Precision scale • Temperature control units – 2x HB-Therm Machine Advantages Technical Machine Advantages • Exceptional energy efficiency • Increased platen rigidity and mould safety • Fully electric direct drive • Ultra-precise direct drive motors with a response time of 0.1 ms • Displacement: 52 cm³ • Injection pressure: 2180 bar • Clamping platens: 520 x 570 mm Additional Information Control Unit Modern control system with NC5+ Automatic adjustment of mould height and clamping force Energy-saving routines Dimensions Machine depth: 4308 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 91.810 h, vpenjalna sila: 2.500 kN, premer vijaka: 60 mm, injekcijska masa: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2,500 kN and a locking force of 2,750 kN. The machine is equipped with a Wittmann linear robot and supports a maximum mould weight of 3,300 kg. It is fitted with a screw diameter of 60 mm and offers a shot volume of 636 cm³. Consider this opportunity to purchase this hydraulic injection molding machine DEMAG ET250/630-840 Concept. Contact us for further information on this machine. • Locking force: 2,750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions (H x V): 950 x 950 mm • Mould height: 330–830 mm • Opening stroke: 675 mm • Max. daylight (distance between platens): 1,505 mm • Mould weight: fixed side 1,100 kg, moving side 2,200 kg (total 3,300 kg) • Ejector: • Stroke: 200 mm • Force: 80 kN • Centring ring diameter: 200 mm • Pneumatic ejector: yes • Core pulls: 2 on moving side (AS) • Injection unit: • Unit size: 840 • L/D: 20 • Shot volume: 636 cm³ • Injection pressure: 1,351 bar • Plasticising rate (PS): 74 g/s • Screw speed: 326 rpm • Nozzle radius: 15 mm; nozzle orifice: 3 mm • Max. dosing stroke: 225 mm Godpfx Afsyfq Aljwoit • Note: Second injection unit listed without data → single-component machine • Interfaces/controls: • Printer interface: yes • Process control/SPC: yes Additional equipment • Robot/handling: Wittmann W633-961 linear robot • Travel distances: Y (vertical) 1,600 mm, X 900 mm, Z 2,500 mm • Hot runner control: 9 zones • Mould monitoring: Kistler pressure (p=1) / temperature (t=0) system • Needle shut-off control: hydraulic (not equipped for pneumatic)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, obratovalne ure: 122.158 h, vpenjalna sila: 3.300 kN, premer vijaka: 60 mm, This hydraulic injection moulding machine, DEMAG ET 330 - 1450, was manufactured in 1995. It features a clamping force of 3300 kN and a screw diameter of 60 mm, providing robust performance for a wide range of applications. The machine is equipped with a Wittmann W322-121 linear robot, enhancing automation capabilities. Take advantage of this opportunity to purchase the hydraulic injection moulding machine DEMAG ET 330 - 1450. Contact us for further details. • Clamping Unit: • Clamping force: 3630 kN • Tie bar spacing (H x V): 710 x 630 mm • Platen dimensions (H x V): 1040 x 950 mm • Mould installation height: min. 330 mm / max. 830 mm • Opening stroke: 675 mm • Platen distance (daylight): 1505 mm • Permissible mould weight: fixed side (DS) 1200 kg; moving side (AS) 2400 kg; total 3600 kg • Ejector: stroke 200 mm; force 80 kN; retraction force 35 kN • Core pull control: yes (2 units, on ejector side/AS) • Shut-off nozzle: yes (hydraulic/pneumatic 1/1) • Injection Unit 1: • Unit Code: 1450-60 • Screw diameter: 60 mm • Injection pressure: 1905 bar • Shot volume: 763 cm³ • Shot weight (PS): 695 g • Screw L/D ratio: 20 • Nozzle radius: 15 mm • Maximum dosing stroke: 270 mm • Plasticising rate: 41 g/s • Equipment/Controls: • Hardened (wear-resistant) injection unit: yes • Pneumatic ejector: yes • Process control: SPC (yes/yes) • Printer interface: integrated • Hot runner control: 0 zone (none) • Maintenance: • Hose replacement performed in 2017 Additional Equipment • Wittmann W322-121 CNC linear robot/extraction unit (included with the machine) Gjdoyg Nkwjpfx Afweit • Travel paths: Y-axis 1600 mm, X-axis 500 mm, Z-axis 2500 mm

Leto izdelave: 2019, obratovalne ure: 18.138 h, stanje: pripravljen za uporabo (rabljen), skupna masa: 25.340 kg, Ta stroj SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 je bil izdelan leta 2019. Gre za robusten električni stroj za brizganje plastike s premerom polža 50 mm, zapiralno silo 3.500 kN in razmakom med stebri 820 mm. Obdelal je 18.138 delovnih ur in opravil 12.875.090 ciklov. Če iščete zmogljiv in kakovosten stroj za brizganje, priporočamo, da razmislite o tem modelu SUMITOMO SHI DEMAG El-Exis SP 350/820-1600, ki je naprodaj pri nas. Dodatne informacije • Premer polža: 50 mm Gijdpox D Nxzofx Afwjt • Največji dozirni volumen: 530 cc • Število ciklov: 12.875.090 • Razmak med stebri: 820 mm • Zapiralna sila: 3.500 kN

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, APLIKATOR CAP 30 1000 ZA HELICAP 23 PRO: Leto izdelave: 2019 Giedeyynd Rjpfx Afwst Različica: 400V 9.000 delovnih ur Kot novo stanje Stroj bo v proizvodnji do 15. maja.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2004, številka stroja/vozila: LS137, Tehnični podatki: 1x Demag KBK 2 stebrni vrtljivi žerjav NL 500KG z Demag DK verižnim vitlom Nosilnost pri polnem iztegu 500KG Višina: cca 4,05 m Spodnji rob nosilca: cca 3,55 m Izteg: 4 m Višina kavlja: cca 2,8 m Skupna teža cca 1000KG vključno z osnovno ploščo 115x115 cm z 500KG Demag DK verižnim vitlom vklj. zatič, kabelski verižnik, voziček, zaključna kapica itd. Območje vrtenja 300°, priklop na 400V 16A Žerjav je razstavljen in takoj na voljo Lokacija artikla: 75053 Gondelsheim Na voljo so tudi drugi žerjavi, nosilnost 80–5000 kg, povprašajte Gisdpeywfmwsfx Afwst Glejte slike Pošiljanje preko špedicije ali osebni prevzem samo po dogovoru o terminu

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1986, številka stroja/vozila: LS14 + RIO RES, Tehnični podatki: 1x Demag KBK 2 stebrno vrtljivi žerjav, nosilnost 500 kg, z verižnim dvigalom Demag PK Žerjav je na voljo skupaj 4x! Nosilnost pri polnem iztegu: 500 kg Višina: cca 3,55 m Spodnji rob izteznega nosilca: cca 3 m Izteg: 3 m Višina kljuke: cca 2,6 m Skupna teža: cca 300 kg Z 500 kg verižnim dvigalom Demag PK Vključuje zatič, kabelsko verigo, voziček, končni pokrov itd. Območje vrtenja 300°, priklop na 400 V 16 A Žerjav je demontiran in takoj na voljo Lokacija artikla: 75053 Gondelsheim Na voljo so tudi drugi žerjavi, nosilnost 80-5000 kg, prosim povprašajte Glejte slike Giedoywfl Tspfx Afwst Pošiljanje s špedicijo ali osebni prevzem le po predhodnem dogovoru

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Kontaktirajte nas za ponudbo Gijdpfx Afsyycihewot