Comec Vertikalni Vrtalni Stroj S 3 Vreteni nakup rabljenega (113.400)

Stanje: rabljeno, Leto izdelave: 1954, Technical details: Ram stroke – max.: 220 mm Workpiece diameter – max.: 400-450 mm Total power requirement: 1.5 kW Work table: 650 x 250 mm Ram adjustment: 100 mm manual Ram strokes per minute: 45 / 78 / 125 Table adjustment, longitudinal: 400 mm Csdpfx Acev Ty R De Norc Table adjustment, lateral: 150-170 mm Table adjustment, vertical: approx. 360 mm Tool head swivels: +/- 10 degrees Total power requirement: 1.5 kW Machine weight approx.: 0.9 t Machine dimensions approx. (LxWxH): 1.2 x 0.9 x 1.8 m

Stanje: rabljeno, Technical Details: Sheet width: 1080 mm Sheet thickness: 1.25 mm Frame spacing: 1200 mm Dimensions (LxWxH): 1.9 x 0.6 x 0.9 m Additional features: 2x Bending rollers: -Ø 63 x 1080 mm -the top roller is swiveling -the bottom roller has an adjustment travel of 12 mm -manual drive via hand crank 1x Guide roller: -Ø 63 x 1080 mm -idle running Credpfxeu Icdyo Ac Nec -adjustment travel approx. 5 mm

Stanje: rabljeno, Technical Details: Drilling capacity in steel (diameter): 32 mm Throat depth: 1250 mm Max. workpiece height: - mm Distance from column to spindle center: 1250 mm Drill head horizontal travel: 980 mm Vertical adjustment of the arm: 800 mm Distance table to spindle underside: 2,05 x 9,2 x 2,85 mm Spindle taper: MT4 Drill spindle stroke: 280 mm Speed range - stepless: 28–1,195 (3 steps) rpm Arm swivel range: 90° Feed rates: 0.1/0.2/0.3/0.4/0.8/1.2 mm/rev (6 steps) Column diameter: 300 mm Clamping area of base plate: 1,370 x 750 mm Machine weight approx.: - t Machine dimensions approx. (LxWxH): 2.05 x 9.2 x 2.85 m Cjdpfjwid Ausx Ac Nerc Coolant system with supply Table with clamping area 1,370 mm x 750 mm Incl. drill cube

Stanje: rabljeno, Leto izdelave: 1977, Tehnične podrobnosti: Premer honanja: 125 mm Hod: 500 mm Razdalja: - mm Razdalja med mizo in spodnjim robom vretena: 525 mm Hitrost vretena za brušenje: 26-1200 (12 stopenj) vrt/min Premer honanja (min.): 30 mm Premer honanja (max.): 165 mm Pomik mize: 800/150 (max.) mm Vpenjalna površina mize: 500 x 1000 cm Skupna potrebna moč: 4,22 kW Teža stroja cca: 0,15 t Mere stroja (D x Š x V): 1,30 x 1,20 x 2,70 m Obstaja pomična miza, ki se pomika v vzdolžni in prečni smeri. Ročno mazanje s hlajenjem. Stroj omogoča honanje. Credpfjw Rv Taex Ac Njc Možnost nihajnega gibanja v hitrem hodu med dvema nastavljivima končnima pozicijama.

Stanje: rabljeno, Leto izdelave: 1998, Technical details: Drilling capacity in steel (diameter): 15 mm Drilling stroke: 100 mm Thread cutting: M16 Codsu Idutspfx Ac Norc Number of drilling stations: 3 Drill spindle Morse taper: 3x MT2 Spindle reach: 220 mm Distance between spindles: 335 mm Spindle head adjustment (vertical): 290 mm manual Feed: manual mm/rev Spindle speed: 220-1600 / 400-3200 / 800-6400 rpm Distance spindle/table, min./max.: 235/525 mm Table size: 1270 x 315 mm Table adjustment: fixed mm Total power requirement: not specified kW Machine weight approx.: 0.72 t Machine dimensions approx. LxWxH: 1.4 x 0.8 x 2.25 m Including coolant system Operation via hand and foot control Drill spindles are equipped as follows: 1x drill chuck 13 mm 2x keyless chuck 10 mm

Stanje: rabljeno, Tehnične podrobnosti: Sposobnost vrtanja v jeklu (premer): 32 mm Crsdpsv S Ay Sjfx Ac Noc Izravnava: 1000 Maksimalna višina obdelovanca: - mm Premer stebra: 300 mm Horizontalni pomik vrtalnega vozička: 400 mm Razdalja miza-spodaj vretena: 200 mm Vpenjalni konus vretena: MK 4 Hod vrtalnega vretena: 200 mm Območje vrtljajev - brezstopenjsko: 18 stopenj 14-710 obr/min Zasukalno območje izravnave: 360 stopinj Pomik: 0,09/0,12/0,25/0,5 mm/obrat Teža stroja pribl.: 2,0 t Dimenzije stroja pribl. DxŠxV: 2,4 x 0,9 x 2,4 m Prenosljivo! Upravljanje preko pritiskalnega stikala Podporne noge 4x D=16x30mm, po višini nastavljive 60 mm z ragljo ključem

Stanje: rabljeno, Leto izdelave: 2008, Tehnične podrobnosti: Vrtalna zmogljivost v jeklu (premer): 40 mm Razdalja med vretenom in stebrom: 350 mm Hod vretena: 120 mm Vrtalna zmogljivost v litem železu: 60 mm Vpenjalo vretena: MK 4 Izstop vretena: 350 mm Hitrost vretena: 50 - 1450 / 18 stopenj U/min Podajanje: avtomatsko/ročno mm/U Razdalja vreteno/miza max.: 25 - 705 mm Delovna površina mize: 430 x 430 mm Prilagoditev višine vrtalne mize: 680 mm Premer stebra: 150 mm Razdalja od sredine vretena do spodnje plošče: 1210 mm Skupna potrebna moč: 1,6 kW Teža stroja pribl.: 350 kg Mere stroja pribl. DxŠxV: 0,95 x 0,55 x 2,3 m Miza nastavljiva po višini (nagibna in vrtljiva) Miza vrtljiva 45° levo/desno in okoli stebra 360° Navojno rezanje do M24 Hladilni sistem * Codpfsviqybox Ac Nerc

Stanje: rabljeno, Technical details: Drilling capacity in steel (diameter): 30 mm Drilling stroke: 180 mm Drill spindle Morse taper: 4 x MT 3 Cjdpfxsu Idu Ho Ac Nsrc Spindle lateral displacement: 310 mm Spindle spacing: 490 mm Number of drilling stations: 4 Spindle head adjustment: 300 mm (manual) Feed rate: 0.08 - 0.64 mm/rev (6 steps) Spindle speed: 50 - 1,215 rpm (19 steps) Distance spindle/table: max./min.: 500 / 200 mm Table surface: 1820 x 395 mm Table adjustment: height: 300 mm (manual) Total power requirement: 4 x 1.5 kW (6.0 kW total) Machine weight approx.: 2,800 kg Machine dimensions approx. LxWxH: 2.1 x 1.1 x 2.75 m Additional technical specifications: - Spindle center distance: 490 mm - Thread cutting on drill columns 3 and 4 with automatic reversing - All drill spindles feature right- and left-hand rotation - Spindle intermediate gear and variator - Equipped with coolant system

Stanje: rabljeno, Technical details: Honing diameter: Ø 400 mm Stroke: 600 mm Throat depth: 390 mm Table size: 1,550 x 780 mm Clamping surface: 1,400 x 480 mm Table: fixed Total power requirement: 4.1 kW Machine weight approx.: 2.8 t Machine dimensions (LxWxH) approx.: 2.0 x 1.2 x 4.35 m Precision honing machine with cross table Additional technical features: Crsdpou Ngybsfx Ac Njc - Longitudinal travel of machine table approx. 500 mm - Cross travel of machine table approx. 200 mm - Working height 350 mm (not adjustable) - Distance between column/table 0 - 200 mm Equipment: - Oil tank Ø 300 x 600 mm - Control panel as per documentation.

Stanje: rabljeno, Tehnične podrobnosti: Višina konice nad ležiščem: 260 mm Premer obdelovanca nad ležiščem: 500 mm Premer obdelovanca nad suportom: 250 mm Dolžina rezkanja: 2000 mm Število zob: 2 - 50 Pomik: 0,023 - 5,17 mm/min Modul - maks.: 8 / 12 Premer vretenine izvrtine: 102 mm Obrati obdelovanca: 18 - 224 obr/min Pomik pinole konjička: 100 mm Skupna potrebna moč: 9,5 kW Teža stroja cca: 5,2 t Dimenzije stroja pribl. D x Š x V: 3,6 x 2,1 x 2,0 m Dodatni tehnični podatki: Kotalni podajalec: 0,023 - 5,17 mm/obr Credpfx Aev U T Dyoc Nec Vzdolžno rezkanje – mm/min.

Stanje: rabljeno, Technical Details: X travel: 880 mm y travel: 300 mm z travel: 900 mm W axis: 60 mm Spindle head swivels left and right: 60° Table clamping surface: 880 x 300 mm Machine weight approx.: 1200 kg Machine dimensions approx. LxWxH: 1.3 x 1.4 x 1.9 m Codpju Ndfhofx Ac Nsrc including accessories

Stanje: rabljeno, Leto izdelave: 1976, Technical Details: Table surface: 1300 x 190 mm Speed range: 60 - 4000 rpm, infinitely variable Feed, infinitely variable quill: 0.06 / 0.12 / 0.24 mm/rev Vertical quill travel: 140 mm Spindle taper: SK 40 Spindle head swivels left and right: 90° and 45° Total power requirement: 3.0 kW Machine weight approx.: 1620 kg Machine dimensions LxWxH: 2.7 x 2.3 x 2.4 m Milling machine with universal milling head Spindle rotation right/left Table specifications: X/Y/Z travel: 860/380/460 mm Feed X/Y/Z: 40 - 400 mm/min, stepless Rapid traverse: 400 mm/min Crsdpsu Sq Emsfx Ac Njc Max. workpiece weight: 30 kg Equipment: 3-axis digital readout Mitutoyo with extension arm Machine lighting Coolant tank with pump Adjustable feed on X and Y axes Including accessories as shown in the picture

Stanje: rabljeno, Technical details: Number of spindles: 4 Drilling capacity in steel (diameter): 2–16 mm Drilling stroke: 140 mm Drill spindle taper: MT 3 Spindle outreach: 280 mm Spindle distance: 455 mm Spindle head adjustment: 250 mm via hand crank Feed rate: 0.08 – 0.12 – 0.20 – 0.31 mm/rev, 4 steps Feed: automatic + manual Spindle speed: 180 – 2000 rpm, 8 steps Distance spindle/table: min. 3x 140 mm and 1x 260 mm Distance spindle/table: max. 3x 700 mm and 1x 820 mm Table surface: 1800 x 350 mm Table adjustment: 300 mm via hand Total power requirement: 6.3 kW Cjdpfxju Idugs Ac Norc Machine weight approx.: 2.4 t Machine dimensions approx. (LxWxH): 2.1 x 0.9 x 2.2 m Application: Drilling, countersinking, reaming, and tapping. Each drill spindle is equipped with its own drive motor. Features: Foot pedal/operation Hand crank

Stanje: rabljeno, Leto izdelave: 1966, Technical Details: Drilling capacity in steel (diameter): 63 mm Arm reach: 2000 mm Max. workpiece height: 1270 mm Spindle taper MT: MT 5 Drilling depth: 400 mm (stroke) Quill travel: 400 mm Feed rate: 0.05 - 0.32 m/min Spindle speeds: 14 - 1000 rpm (40/50/63/160+200 without function) Column swiveling: 360 ° Electrical configuration - voltage/frequency: 380/50 V/Hz Base plate: 1900 x 950 mm Total power requirement: 13 kW Machine weight approx.: 7.9 t Required floor space approx. LxWxH: 3.9 x 1.5 x 3.4 m This radial drilling machine is equipped with an electric sliding table! Further features: - Distance spindle center to column: 360 - 2000 mm - Distance drill chuck to table surface: 1270 mm - Distance spindle to base plate: 1220 - 4520 mm - Drilling capacity in St 60: 63 mm at feed rate 0.32 - Drilling capacity in GG 22: 80 mm at feed rate 0.5 - Horizontal travel of drilling head: 1640 mm - Vertical travel of drilling head: 980 mm - Distance spindle nose to base plate: 430-1770 mm Equipment: - Coolant pump (not operational) Codpfx Aceu Id Dbo Nsrc - Steady rest - 1 electrically driven sliding table 1250 x 1000 mm, type TI 18 with digital display (machine interface) - incl. machine vice Currently, not all spindle speeds are selectable.

Stanje: rabljeno, Leto izdelave: 1981, Technical details: X-travel: 400 mm y-travel: 420 mm z-travel: 380 mm Table size: 710 x 400 mm Max. table load: 120 kg Spindle speed range: 45 - 2240 / 18 steps rpm Infinitely variable feed: 6.3 - 600 / 2 stepless mm/min Quill stroke vertical: 100 mm Quill stroke horizontal: 100 mm Spindle taper vertical/horizontal: SK 40/SK 40 Spindle head swivels left and right: 90° Distance table/horizontal spindle: min./max.: 200 / 325 mm Distance table/vertical head: min./max.: 150 / 730 mm Total power requirement: 5.5 kW Crodpfx Acju Nc Hks Nsc Machine weight approx.: 1,950 kg Machine dimensions LxWxH: 1.7 x 1.4 x 1.9 m Control cabinet dimensions: 850 x 500 x 1500 mm Incl. machine feet and operating manual

Stanje: rabljeno, Leto izdelave: 2011, Tehnični podatki: Zmogljivost vrtanja v jeklu (premer): 35 mm Iztek: 350 mm Hod vrtanja: 180 mm Rezanje navojev: ST M 24 mm Codpfx Aoyli Sfoc Norc Vreteno MK: MK4 Hitrost vrtenja vretena: 50 - 1450 obr/min Največja razdalja vreteno/miza: 780 mm Vpenjalna površina mize: 560 x 560 mm Teža stroja pribl.: 500 kg Pribl. dimenzije stroja (DxŠxV): 0,73 x 0,56 x 0,22 m

Stanje: rabljeno, Technical details: Cjdpfx Asyq Rpisc Nerc Drilling capacity in steel (diameter): 28 mm Throat depth: 345 mm Drilling stroke: 190 mm Drilling capacity in cast iron: Ø 35 mm Spindle taper: MT4 Spindle speed: 50 - 1280 rpm / 4-step stepless Feed: 0.1; 0.2; 0.3 mm/rev manual/automatic Maximum spindle-to-table distance: 200 - 800 mm Table clamping surface: 450 x 600 mm Table rotation: 360° Table adjustment: vertical 600 mm Column diameter: Ø 160 mm Machine weight approx.: 273 kg Machine dimensions (LxWxH) approx.: 1.0 x 0.71 x 2.0 m Tapping operation selectable for right- and left-hand rotation via foot switch and/or depth stop Table adjustment via hand crank Coolant device Machine vice Röhm Supra quick-action chuck, 3 - 16 mm Slight damage to cover as is/in current condition *

Stanje: rabljeno, Leto izdelave: 1990, Technical details: X travel: 185 mm Y travel: 95 mm Z travel: 200 mm Control: emco tronic TM02 Spindle mount: SK 30 Speed range: 10 - 4000 rpm, stepless Feed rate stepless: 1 - 2000 mm/min Rapid traverse: approx. 3.0 m/min Tool turret - number of stations: 10 Interface: R 232 Table size: approx. 420 x 125 mm Total power requirement: 0.8 kW Cedpfx Asvc Awrsc Nerc Machine dimensions (LxWxH): 2.1 x 0.9 x 2.0 m Control panel: EMCOTRONIC TM 02 Operating modes: Manual operation and/or automatic Coolant system (with supply to the milling spindle) Operation via control panel mounted on 3 swiveling wheels Pneumatic door guard

Stanje: rabljeno, Leto izdelave: 1957, Technical Details: Codpsvhbpqsfx Ac Nsrc Drilling capacity in steel (diameter): 32 mm Throat depth: 1000 mm Horizontal travel of drilling head: 700 mm Vertical adjustment of arm: 600 mm (motorized) Arm swivel range: 90° right/left Distance table to spindle nose: min./max.: 200 / 1120 mm Spindle taper: MT 4 Drill spindle stroke: 420 mm (manual/automatic) Stepless speed range: 20 - 2000 rpm / 3-step Feed: 0.1 / 0.2 / 0.3 / 0.4 / 0.8 / 1.2 mm/rev Column diameter: 250 mm Clamping surface of base plate: 1100 x 600 mm Total power requirement: 4.6 kW Approx. machine weight: 2.5 t Machine dimensions (LxWxH): approx. 1.8 x 0.8 x 2.5 m Tool ejection by drift key Equipment: Coolant system with pump (without supply lines) Drill cube: L: 760 x W: 500 x H: 510 mm / horizontal surface 760 x 500 mm and vertical surface 760 x 510 mm Machine lamp

Stanje: rabljeno, Technical details: Z-axis travel: 400 mm Speed range: up to 3,000 rpm, stepless Feed rate, stepless: not specified Quill stroke, vertical: 100 mm Spindle taper: MT2 (Morse Taper 2) Table surface: 445 x 315 mm Crsdpfjv A S Efjx Ac Nec Distance table to lower edge of spindle: max. 520 mm Table travel, longitudinal: 250 mm Table travel, cross: 330 mm Table height above floor: 920 mm Total power requirement: 1.6 kW Approx. machine weight: 1,500 kg Machine dimensions (LxWxH): 1.3 x 1.1 x 2.0 m Application: Milling and drilling of elongated holes. The drill spindle head is equipped with a precision dial gauge for depth indication. 5x T-slots according to DIN 650: a=10; h=18; b=18; c=8 mm Features: Two-axis digital readout, ACU-RITE

Stanje: rabljeno, Tehnične podrobnosti: Z-hod: 1250 mm Premer vrtenja nad ležiščem: 260 mm Credpfx Acsv U Un Hs Noc Premer obdelovanca nad ležiščem: 500 mm Premer obdelovanca nad suportom: 250 mm Višina konice nad ležiščem: 260 mm Dolžina rezkanja: 2000 mm Maks. modul: 8 / 12 Skupna potrebna moč: 9,5 kW Približna teža stroja: 3,8 t

Stanje: rabljeno, Leto izdelave: 1980, Technical details: X-axis travel: 820 mm Y-axis travel: 300 mm Z-axis travel: 485 mm Spindle taper: ISO SK 40 Spindle head swivels left and right: 0–45° left/right Quill stroke: 80 mm Speed range: 56–355 and 450–2800 rpm Credpfxewtct To Ac Noc Feed rate X/Y: 10–80 and 80–630 mm/min Rapid traverse speed X/Y: 3150 mm/min Table size: 1700 x 400 mm Clamping surface of table: 1120 x 205 mm Total power requirement: 7.5 kW Machine weight approx.: 2120 kg Machine dimensions approx. (LxWxH): 1.7 x 1.7 x 2.5 m Additional features: - Table adjustment via machine – see X/Y and Z data - Manual table adjustment X/Y/Z: 850/330/505 mm - Arbor mounting max. Ø 40 mm - Operation via control panel - Includes 4 base plates

Leto izdelave: 1948, stanje: rabljeno, Technical Details: Maximum ram stroke: 180 mm Stroke adjustment: 100 mm Ram stroke rate: 45 / 73 / 125 strokes/min Crsdpfx Acou Ng Tnj Nec Distance table/ram: 400 mm Work table: 650 x 250 mm Total power requirement: 2.0 kW Voltage: 380 V Machine dimensions (approx. LxWxH): 1.3 x 1.0 x 1.9 m VERTICAL BROACHING MACHINE for machining keyways in flanges and/or bushings Table adjustments: longitudinal = 420 mm manual / 400 mm automatic, cross = 150 mm, vertical = 300 mm Mechanical drive Stroke adjustment via crank disc with lead screw Ram guide tilt with ram: 10° Drive pulley speed: 400 rpm The machine does not comply with statutory UVV safety regulations. Sold as is, without test.

Stanje: novo, Leto izdelave: 2025, We offer a new table blast machine – high-quality Czech manufacture, made using premium-grade materials. Model - TS 330/1. - Turntable diameter: 1000 mm - Maximum workpiece height: 550 mm - Overall machine height: 2750 mm - 1x blasting turbine – power input: 5.5 kW - Bucket elevator – power input: 0.75 kW - Table rotation – power input: 0.75 kW - Total machine power requirement: 7 kW We also produce table blast machines with a table diameter of 1500 mm. Units can be supplied with a frequency inverter for adjustable blasting turbine speed. A major advantage of this machine is the ability to reverse the turbine rotation direction for both right and left rotation. Crodpfewt T Uzjx Ac Nsc Blasting equipment is CE certified. Additional features include high blasting efficiency, quiet operation, low energy consumption, and compact footprint requirements. Within its class, this table blasting machine’s design can be considered highly advanced. (Sandblaster, sandblasting, blasting, sandblasting machine, blast machine, table blast machine).

Stanje: rabljeno, Leto izdelave: 2002, Premer honanja 200 mm Hod 600 mm 2 vretena za honanje Crjdjy Umatopfx Ac Nsc obe z dvojnim mehanskim/hidravličnim razširjanjem vrtljiva miza z razdelitvijo 2 x 180° ali 4 x 90° idealno za honanje cilindričnih puš Stroj je kot nov. Kupljen je bil za naročilo, ki po dveh letih ni bilo podaljšano.