Centauro Alfa Nc nakup rabljenega (4.553)

Stanje: dober (rabljeno), Leto izdelave: 2002, Manufacturer: PLEIGER Model: HF 75 / 115 S 30 Control: Siemens Simatic panel Year of manufacture: 2002 Stroke speed, feed step 1: 4 - 20 m/min Stroke speed, feed step 2: 0.3 - 3 m/min Chuck rotation speed step 1: 300 rpm and 320 Nm Chuck rotation speed step 2: 100 rpm and 1290 Nm Horizontal deep hole honing machine Horizontal tube honing machine Horizontal cylinder honing machine Horizontal pipe honing machine Fine finishing of cylindrical bores Specifications Metric US Standard Max. bore depth: 11,500 mm Spindle power: 55 kW Rotational speed: 300 rpm Dimensions (approx.): Length: 25,000 mm Width: 2,000 mm Height: 2,000 mm Weight: 30,000 kg Djdpfjkvnc Sjx Anqekt Please note: The information on this page has been provided to the best of our knowledge and, wherever possible, sourced from the manufacturer. The information is given in good faith, but its accuracy cannot be guaranteed. Consequently, it does not constitute any representation or contractual terms. We recommend verifying all key details.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: nepreverjeno, številka stroja/vozila: 06.E.400.020, Country of manufacture: CH Voltage: 3x400V - 24(V – DC) Dimensions: 237x206x195 cm Net weight: 5500 kg TECHNICAL DATA Control system: Fanuc 21i-MB 3 Axes U: Axis of the working grinding wheel W: Workpiece-to-workpiece / dressing axis X: Axis of the dressing wheel Working range Through-feed grinding Workpiece diameter: Ø 1.5 - 50 mm Working range Plunge grinding Workpiece diameter: Ø 1.5 - 100 mm Max. grinding length: 270 mm Grinding wheel Max. external diameter: Ø 400 mm Internal diameter: Ø 203.2 mm Max. speed: 50 m/sec. Drive power: 11 kW Optional drive power: 29 kW Regulating wheel Max. external diameter: Ø 250 mm Internal diameter: Ø 127 mm Speed: 5 - 1,000 min⁻¹ Tilt angle: +5° / -5° Drive power: 3.7 kW Positioning accuracy All 3 axes: 0.1 µm Glass scale resolution: 0.05 µm Dimensions Length: 2,060 mm Width (door open): 2,370 mm (3,120 mm) Height (safety cover open): 1,950 mm (2,100 mm) Dedpfxoiqt S Ae Anqokt Weight: 5,500 kg Compressed air Max. pressure: 16 bar Air consumption: 165 L/min Air consumption with dressing spindle: 250 L/min Temperature: +15° / +40° C Errors and omissions excepted; these technical data are provided without obligation.

Stanje: rabljeno, 2-axis extraction robot, inserter, servo robot, workpiece gripper, loading robot, extraction robot Extraction device, handling unit for presses, lathes, etc. GETECHA Type GL-20S Serial No. 13836 Year of manufacture: 10/2003 Travel path Z-axis: 1900 mm Travel path Y-axis: 250 mm Travel speed Z-axis: max. 1100 mm/sec Travel speed Y-axis: max. 227 mm/sec Infinitely variable travel speed on Y and Z axes via SMB servomotors - Precise axis movement via linear guides - episod control system - Separate control panel - Control interface for conveyor belt, gripper magnets, ejector cylinders, vacuum, gripper - External monitoring inputs for emergency stop, press open, press closed, safety doors closed, automatic operation - Mounted gripper with 3 lifting magnets, 3 pneumatic ejector cylinders (30 mm stroke), 1 pneumatic clamping cylinder (40 mm stroke) - Operating hours: 25,998 h The machine was used as a loader/unloader on a press. Required space (L x W x H): 2900 x 1800 x 2000 mm Dsdeharwyspfx Anqokt Weight: approx. 800 kg Good condition

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2006, dolžina mize: 3.500 mm, širina mize: 1.500 mm, Water Jet Sweden NC 3515 D 5-axis Images show the current condition - Two Z-axes - 1 x 45° cutting head, 1 x 2D cutting head - Control system will be renewed - Machine will be sandblasted and freshly painted - Pump available as an option - Available 12–16 weeks after order confirmation Dkodpsnab Rzofx Anqjt Special features: - Customizable to individual customer requirements - 12 months or 2,000 operating hours warranty (excluding spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us for your tailored offer!

Stanje: rabljeno, CNC control, control panel, operator console, operator unit, card slot, control cards, MC3 controller, plug-in cards, printed circuit boards, valve module, valve amplifier, circuit board, analog distribution card, load amplifier -Manufacturer: bg Bernd Grigat, load amplifier from Demag D 100-275 NC injection molding machine -Type: QVA 30/1 .: 2442/00 Dkodpen Hbcyjfx Anqjt -Quantity: 2x amplifiers available -Price: per unit -Dimensions (total): 100/40/H110 mm -Weight: 0.3 kg/unit

Stanje: rabljeno, CNC control, operating panel, control console, control unit, card slot, control cards, MC3 control, plug-in cards, PCBs, valve module, valve amplifier, circuit board, analog distributor card, distributor PCB, valve amplifier, bus PCB, bus board, processor card, interface card, temperature control card -Manufacturer: Mannesmann Demag, electronic control modules from Demag D 100-275 NC injection molding machine -Card carrier: Murrelektronik 630055 -Control card: Philips 9404 780 020 Dkjdpfon Hbc Isx Anqjt -Single components: see photos -Price/sale: as a complete set -Overall dimensions: 315/140/H215 mm -Weight: 1.4 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.100 mm, pomik po osi Z: 1.300 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 30 m/min, hitrost pomika os X: 30 m/min, hitrost podajanja osi Y: 30 m/min, hitrost podajanja os Z: 30 m/min, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 36 obr/min, dolžina mize: 4.000 mm, širina mize: 1.500 mm, kapaciteta rezervoarja: 500 l, SHW PowerSpeed 5 Axis Travels • X-axis (bed): 4,000 mm • Y-axis (vertical): 2,100 mm • Z-axis (horizontal spindle head): 1,300 mm Control System • CNC control: Heidenhain iTNC 530 Feed Rates • X, Y, and Z axes: 2 – 30,000 mm/min • Acceleration: 3.5 m/s² Universal Milling Head in Orthogonal Design • Milling head rotation range (mount): 360 x 1 degree • Milling head rotation range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 – 4,000 rpm o Temporarily 36 – 6,000 rpm Dodpfx Anjw I Rz Heqskt Automatic Tool Changer • Tool magazine for 48 tools Clamping Table • Clamping surface: 4,000 x 1,500 mm Chip Conveyor • Fork length: 4,000 mm Coolant System • Tank capacity: 500 liters Splash and Chip Guard • On one side, with 2 sliding doors, manually movable About MBM MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on milling machines. Our services include spare parts supply, on-site customer service, machine overhauls, and control system retrofits. Services: - Used machines - Spare parts - Customer service - Machine servicing - Machine overhauls - Control system modernization ----- Used machine - used milling machine - used traveling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used cnc milling machine - used drill milling machine - used metal milling machine - used metal mill - used metalworking milling machine - used cnc mill - cnc milling machines - milling machine - large workpiece machining - cnc large part machining - milling - shw - PS5 - PS 5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed - SHW Powerspeed 5 - PSZ 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, The used FANUC ALFA 1-iC wire EDM is a midsize, 5-axis CNC wire-cutting machine featuring immersion machining. Travel ranges: X 550, Y 370, Z 410 mm. Year of manufacture: 2004. CE certified. Complete with automatic wire threading, chiller, and opening roof. Technical Specifications – FANUC ROBOCUT ALPHA 1iC Wire EDM - Maximum workpiece dimensions (L x W x H): 820 x 730 x 300 mm - Maximum workpiece weight: 1,000 kg - CNC control: Fanuc Series 180is-WB - 5 axes (X, Y, Z, U, V) - Axis travel X/Y/Z/U/V: 550/370/410/120/120 mm Dsdpfsxd R Hmsx Anqokt - Rapid traverse on X/Y/Z axes: 900 mm/min - Rapid traverse on U/V axes: 450 mm/min - Table size (L x W): 780 x 600 mm - Maximum part dimensions (L x W x H): 820 x 730 x 300 mm - Maximum part weight: 1,000 kg - Maximum taper angle: 30 degrees - Automatic wire threading - Wire diameter: 0.1–0.3 mm - Electrical connection: 400 V, 50/60 Hz - Total power requirement: 13 kW - Machine weight: 3,100 kg

Stanje: novo, Pressure: 100 Cylinder: horizontally adjustable Stroke: 350 mm Stand width: 1050 mm Working speed: 2 mm/s Rapid traverse: 28 mm/s Length: 1900 mm Width: 850 mm Height: 2250 mm Dkjdewwngtjpfx Anqjt Weight approx.: 1030 kg Cylinder horizontally adjustable: 650 mm - Cylinder adjustable horizontally - 650 mm Height-adjustable work table – conveniently adjustable via chain Safe two-hand operation – convenient control via hand lever and push button Adjustable maximum pressure – individually adaptable for various applications Integrated manometer – enables precise pressure monitoring during operation CE-compliant design – manufactured according to current safety and quality standards Operating manual – detailed and easy to understand, available in German and English Two working speeds – for particularly precise and efficient work Image is a sample photo

Stanje: novo, Pressure: 100 Cylinder: horizontally adjustable Stroke: 350 Frame width: 1500 Working speed: 2 Rapid traverse: 28 Length: 2400 Width: 1000 Height: 2250 Weight approx.: 1500 Cylinder horizontally adjustable: 1150 – Cylinder horizontally adjustable – 1150 mm Height-adjustable work table – conveniently adjustable via chain Safe two-hand operation – user-friendly control via hand lever and push button Adjustable maximum pressure – individually adaptable for various applications Integrated pressure gauge – allows precise pressure monitoring during operation CE-compliant design – manufactured according to current safety and quality standards Operating manual – detailed and easy to understand, available in German and English Dsdpfjwwngyjx Anqjkt Two working speeds – for particularly precise and efficient work The image is a sample photo

Stanje: novo, Pressure: 100 Cylinder: fixed Stroke: 350 mm Frame opening: 1050 mm Working speed: 2 mm/s Dkedpfjwwng Hex Anqjt Rapid approach: 28 mm/s Length: 1900 mm Width: 850 mm Height: 2250 mm Weight approx.: 1030 kg Height-adjustable work table – easily adjustable via chain Safe two-hand operation – convenient control via hand lever and push button Adjustable maximum pressure – can be customized for a wide range of applications Integrated pressure gauge – allows precise pressure monitoring during operation CE-compliant design – manufactured according to the latest safety and quality standards Operating manual – detailed and easy to understand, available in German and English Two working speeds – for particularly precise and efficient working The photo is a sample image.

Stanje: novo, Pressure: 1500 Cylinder: fixed Stroke: 350 Column width: 1500 Working speed: 3 Rapid traverse: 22 Length: 2500 Width: 1200 Height: 2500 Approx. weight: 2450 Height-adjustable worktable – easily adjustable via chain Safe two-hand operation – convenient control using hand lever and push button Adjustable maximum pressure – can be individually set for a variety of applications Integrated pressure gauge – enables precise pressure monitoring during operation CE-compliant design – manufactured to current safety and quality standards Operating manual – detailed and easy to understand, available in German and English Two working speeds – for particularly precise and efficient operation The picture shown is for illustrative purposes only. Dkodpfx Anowwnhdjqst

Stanje: novo, Pressure: 40 Cylinder: fixed (not movable) Stroke: 350 mm Clearance between uprights: 900 mm Working speed: 4 mm/s Dodpfxjwwnhqs Anqekt Length: 1600 mm Width: 700 mm Height: 2050 mm Approx. weight: 430 kg Height-adjustable work table – conveniently adjustable via chain Safe two-hand operation – comfortable control via hand lever and push button Adjustable maximum pressure – can be individually set for various applications Integrated pressure gauge – enables precise pressure monitoring during operation CE-compliant design – manufactured in accordance with current safety and quality standards Operating manual – detailed and easy to understand, available in German and English Two working speeds – for particularly precise and efficient work The image is for illustration purposes only.

Stanje: novo, Leto izdelave: 2026, AREA - CARCASE PRESS GANNOMAT "CONCEPT 70 EASY 170" Complete in standard version with: - Sturdy, torsion-resistant frame made of steel, welded and bolted construction - SIDE press beam with continuous pressure surface and 25 mm thick, coated support plate - Counterpressure surfaces (side pressure wall, bottom) are 25 mm thick, coated, continuous support plates Dedpfxjw Sgnkj Anqskt - Electromotive adjustment of the press beam via precision trapezoidal-thread spindles (with increased pitch and running accuracy) and high-performance slide nuts with grease reservoir - Pressing is performed electromotively via worm gear motor (0.75 kW) - Pressing force of the press beam can be continuously adjusted electronically via potentiometer and regulated via frequency inverter, therefore press force control is completely wear-free - Press force for vertical press beam min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Press and adjustment speed of the press beams with fine positioning, via 3-position selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of the press beam, e.g., for low pressing forces such as drawers, etc. - Very easy operation via two separate pushbuttons; two motion sequences (open/close) can be selected via the controller - Freely adjustable pressing time preselection 0-30 min (switchable to seconds or hours) with individually programmable opening dimensions for both press beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Availability: short-term

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 350007, hitrost podajanja osi Y: 2 m/min, dolžina mize: 1.200 mm, obremenitev mize: 1.500 kg, širina mize: 800 mm, Aucune mise à prix – vente garantie au plus offrant ! La date limite de paiement pour la machine est fixée au 20/11/2025 ! Toute enchère implique l’obligation d’enlèvement conforme entre le 01/12/2025 et le 05/12/2025 ! DÉTAILS TECHNIQUES Longueur de table : 1 200 mm Largeur de table : 800 mm Course longitudinale de table : 1 300 mm Charge admissible sur la table : 1 500 kg Avance de table : 3–25 m/min MOUVEMENTS DE L’AXE Y Vitesse d’avance réglable : jusqu’à 2 000 mm/min Prise de passe réglable : 0,001–0,030 mm Réglage fin : 0,001 mm via volant électronique Dkedjxm R Dkjpfx Anqet AXE Z Avance transversale réglable : jusqu’à 2 000 mm/min Déplacement transversal max. : 800 mm Réglage fin : 0,001 mm via volant électronique Dimensions de l’aimant : 1 200 x 750 mm DÉTAILS MACHINE Tension d’alimentation : 400 V Fréquence : 50 Hz DIMENSIONS & POIDS Dimensions (L x l x H) : 7 000 x 2 400 x 2 600 mm Poids : 14 000 kg ÉQUIPEMENT Guides linéaires sur l’axe Y Volant électronique pour réglage fin Entraînement hydraulique de la table extérieure Meules

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, model 4060D, including: 2. Machine details: - NC 4060 D (duplex with 6 abrasive cutting heads) - 1 x Cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeat accuracy (X/Y): +/- 0.05 mm - X-axis feed rate: 10,000 mm/min - Y-axis feed rate: 10,000 mm/min - Z-axis feed rate: 4,000 mm/min Dsdjxgumcepfx Anqekt Technical data: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control features: • 15-inch color flat screen (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal softkey interface • Slim control panel with QWERTY keyboard • 40 GB program memory (hard drive) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held controller (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads, mounted on holders (2 x 3 pcs) – 6 x SM 3000 abrasive dosing units – 1 x IGEMS Standard or Professional – 1 x Documentation – 2 x abrasive storage tanks with 1,500 l capacity – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new cutting tank made of stainless steel (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS staff Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Air connection: 600 l/min Compressed air (technically dried): 6.5 bar

Leto izdelave: 2024, stanje: novo, NEW, NEVER USED Demag Panel NC3 MADE in Germany Width 30 cm Height 5 cm Length 50 cm TYPE: 6EJ5 398-0DE14 Dedjuz Uq Espfx Anqokt

Stanje: zelo dobro (rabljeno), Heidenhain TNC 124 control system Djdpfx Anjwk Edpeqekt Travel X/Y/Z 450/260/120 mm W-axis travel 450 mm Clamping surface (L x W) 770 x 320 mm Permissible table load 100 kg Distance table – spindle nose (min. – max.) 0 – 110 – 560 mm Feed rate X/Y 1 – 2000 mm/min Tool quick-change system SF 32 Infinitely variable speed range 100 – 9200 rpm Drive power 5 kW Installation dimensions (W x D x H) 1500 x 1480 x 2330 mm

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, In this offer, you are purchasing a nearly new resting ECG unit "GE CAM Connect 14". Item for sale: 1 x GE CAM Connect 14 with the following features: - Mobile, deployable resting ECG - 12 or 15 leads - Easy integration into MUSE and PACS systems - With automatic arrhythmia detection - DICOM-compatible Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been functionally tested. Packaging and shipping: You are welcome to inspect the device during our business hours. Please schedule an appointment for this! Dksdpfxowr Anbs Anqot Sea-worthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Stanje: dober (rabljeno), Leto izdelave: 2017, obratovalne ure: 14.500 h, Funkcionalnost: popolnoma funkcionalen, vrsta goriva: dizel, barva: bela, Oprema: dodatne luči, kabina, klimatska naprava, osvetlitev, Naprodaj je rabljen žični dvigalnik Syncrofalke 3t ("gorski kombajn"), izdelan podjetja Mayr Melnhof Forsttechnik GmbH za uporabo v gozdu. Letnik: 2017 Opremljen s procesorsko glavo Woody 60 (vključno z rezalnikom za veje) Povezava: Sherpa U Nosilno vozilo: MAN TGS Lahko si ga ogledate kadar koli med uporabo. Posebnosti: Idealno za strme pobočja in težko dostopno okolje! Zelo robustna konstrukcija za celovito gozdno delo. Redno vzdrževanje – takoj pripravljen za uporabo! Dodpfxewtw Aps Anqokt Stanje: Tehnično in vizualno dobro ohranjen. Pripravljen za uporabo brez potrebe po dodatnih vzdrževalnih posegih.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 6400 x 1500 x 1780 mm Total Power Requirement: 19 kW Weight: 1800 kg Optimizing Cross-Cut Saw WINTER QUICK 100 NC - Minimum workpiece length: 300 mm - Minimum / maximum workpiece width: 20–220 mm - Minimum / maximum workpiece thickness: 15–100 mm - Workpiece thickness tolerance: ±3 mm - Max. tolerance per side of workpiece: 10 mm/m - Wood type: soft or hard - Minimum trimming length: 80 mm - Max. feed speed: 180 m/min - Cutting speed: 0.15–0.3 s - Total power: 19.0 kW - Saw motor: 7.5 kW - Feed servomotor: 5.5 kW - Saw stroke servomotor: 4.5 kW - Conveyor belt motor: 0.75 kW - Beam lift motor: 0.37 kW - Extraction diameter: 2 × Ø120 mm - Table height: 900 mm - Overall dimensions: L=6400 mm, W=1500 mm, H=1780 mm - Weight: 1800 kg Dkedjwt Ua Eepfx Anqst Standard Features: - Infeed and marking station with servo drive - Infeed conveyor and saw stroke each with individual servo drive - 2.5 m discharge conveyor with fluorescence sensor and ejector - Saw blade with integrated scrap air nozzle - User-friendly 10.1'' TFT touchscreen - Air tank for stable pressing force - Powerful servomotor - Fully enclosed safety guard for quiet and safe operation - Efficient production—can replace 4–8 sets of conventional manual cross-cut saws - Saves labor and floor space - Safe operation - Can be combined with a high-speed four-side planer to form an efficient, automatic production line.

Stanje: rabljeno, Leto izdelave: 2009, x-travel: 4000, y-travel: 2000, z-travel: 600 Dimensions (LxWxH): 6,400 x 3,200 x 3,100 mm Weight approx.: 10,500 kg Waterjet Cutting System Stein-Moser GmbH CNC 5-axis 4020 x 2020 x 600 mm Technical Data: - Working area X, Y 2D: 4,020 x 2,020 mm - Support surface X, Y: 4,400 x 2,400 mm - Z-axis: 600 mm - Swivel range A, B: +/- 46° - Rotary axis C, 360° rotation: +/- 3,600° - Positioning speed: 10 m/min - Repeat accuracy: +/- 0.1 mm - Pneumatic connection: min. 6.5 bar - Water connection: 2 – 5 bar - Machine dimensions LxWxH: 6,400 x 3,200 x 3,100 mm - Weight (with water): approx. 10,500 kg - Operating temperature: +10°C to +40°C - Max. operating pressure, high-pressure waterjet component: 4,000 bar TOOLS / SPARE PARTS WORTH approx. €25,000 INCLUDED. New price approx. EUR 300,000 for the waterjet cutting system. Includes 3 tons of cutting sand. Serial: WS2040HB/090601 Type: WS 2040 HB Tank 4.2 PC cabinet (Rittal) on castors with air conditioning unit, contains: servo controller, TYM NUM AXIUM POWER, NUM MDLU 3 drive system, control PC, monitor, splash-proof keyboard and mouse, handheld control device for manual machine operation. - Connection values: 400 V AC, 16 A - Control voltage: 24 V DC NUM AXIUM POWER servo controller: - Central unit for CNC, PLC, and communication functions - Decentralized I/O modules with 32/32 digital inputs/outputs via fiber optics MDLU 3 drive system: - Fully digital, compact, integrated power supply - Integrated position, speed, and current control - Brushless digital servomotors - High-resolution measurement system via integrated SinCos encoder - Motor rated power: 2 kW CAD/CAM software Complete package for creating or importing drawings, setting process-specific parameters for the waterjet, and controlling the machine. - Direct machine control - 32-bit Windows software - Automatic approach strategies - Automatic correction sequence Dkjdpfjwiatijx Anqet - Cutting direction freely selectable for each contour - Jet correction - Material database - Visual cut monitoring - HPGL and DXF import - Automatic pump pressure setting

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Linearni osi NC Dolžina: 1900 mm Hod: 1600 mm Dkodpfoxrb T Hex Anqet Največja nosilnost: 80–100 kg Največja hitrost: 80 m/min Motor: Siemens 1FK 60... Reduktor: I 1:5 Na voljo več kosov z različnimi dolžinami in nosilnostmi.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Demag Concept 100/420-200 Leto izdelave: 2007 Enota za brizganje: Premer polža: 25 mm Tlak brizganja: 2752 bar Prostornina hoda: 61,3 cm3 Teža brizga (PS): 54 g Najv. dozirna pot: 125 mm Enota za zapiranje: Zapiralna sila: 1000 kN Najv. hod odpiranja: 500 mm Min. vgradna višina orodja: 250 mm Najv. razdalja med pritrdilnimi ploščami: 750 mm Pritrdilne plošče: 600 x 600 mm Svetla razdalja med stebri: 420 x 420 mm Najv. teža orodja: 700 kg Dedpfx Ansx Uqb Isqjkt Oprema: Jedro vlečenja: 2x Ogrevanje orodja: 6x Zračni ventil: 1x Vmesnik za robota Stroj se dobavlja z robotom

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 850 mm, izvrtina žagine plošče: 10 mm, TECHNICAL DETAILS Saw blade diameter (without loader): 80 – 850 mm Saw blade diameter (with loader): 250 – 450 mm Bore diameter (from): 10 mm Saw blade magazine: up to 40 pieces Control and Software Control: Industrial PC with Siemens standard PLC Software: For all tooth shapes, including special profiles Grinding Process Sequence 1st step: After start, the vacuum gripper removes the top saw blade from magazine 1. Transfer to the Woodtronic NC4, the cover is opened. 2nd step: Loader returns. The Woodtronic NC4 closes and the grinding program starts. The loader removes the spacer ring from magazine 1 and transfers it to magazine 2. Wait position. 3rd step: After the grinding process and opening of the Woodtronic, the loader removes the ground saw blade and transfers it to magazine 2. Process Repetition Steps 1 to 3 are repeated until the grinding operation is complete. Pre-programming possible: The grinding operation runs continuously, even during programming of the next magazine. The Woodtronic NC4 can be pre-programmed during the day and grinds automatically at night. Measurable with WALTER Saw Check: Rake angles, Clearance angles, Diameter, Number of teeth Tooth form: manual input required MACHINE DETAILS Operating hours: 4,197 h (according to previous operator, information unverified) EQUIPMENT - Automatic loader - Walter Saw Check Djdpfx Aeypbx Esnqokt - Measuring device for carbide-tipped circular saw blades