Örlikon Sistem Varjenja nakup rabljenega (8.439)

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Parts cleaning system / spray cleaning system type CM13 2-tank (washing + rinsing) including air knife blow-off Basket diameter: 1,300 mm (octagonal) Maximum load weight: up to 1,000 kg Loading and unloading of the basket is performed by the operator using a supply trolley parked/positioned in front of the system (decouplable / mobile). Usable height: 800 mm Washing tank: volume: 430 liters, spray pressure: 6.0 bar Rinsing tank: volume: 280 liters, spray pressure: 4.0 bar Total connected load: approx. 52 kW Control: Siemens S7-1200 with KTP700 touch panel Including the following equipment: + automatic water top-up for both tanks + automatic chemical dosing 1-10% (Dosatron) + special spray system (can be switched as required) for small components (= E-Spray System) Dcodpfxsv Tm Ayo Ac Neh + side channel blower with height-adjustable airknife system (blow-off drying) + steam/fume extraction incl. condensate return + weekly timer for electric heating + prepared for optional oil separator retrofit + medium filtration via bag filter (manufacturer: Eaton, Topline) in both circuits (washing and rinsing) + outer cladding with stainless steel sheet + entire system fully insulated + tanks separated into two modules; fully insulated (different temperatures possible) + removable filter baskets in the return circuit + stainless steel circulation pumps incl. mechanical seal and soft starter The system is displayed at the Glogar Technology Center and is used exclusively for washing trials.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, obratovalne ure: 40 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Naprodaj je popolnoma opremljen 3D skener Keyence VL770 z velikim vrtljivim krožnikom, programsko opremo za obratni inženiring in programsko opremo za merjenje GD&T. Dcodpfx Acszab Rvo Njh Za informacije pokličite +36302632132.

Stanje: rabljeno, Leto izdelave: 2008, Maks. teža na obesitveno točko: 44 kg Djdpfx Aszbvlwsc Nech Transportna tehnika (krmiljena s frekvenco): 0,6–2,0 m/min Skupna dolžina verige: cca 40.500 mm Razmak členov verige: 270 mm Po naši oceni je lakirna naprava v dobrem rabljenem stanju. Dodatna oprema, prikazano orodje in vpenjala so vključeni le, če je to navedeno v dodatnih informacijah. Spremembe in napake v tehničnih podatkih in informacijah ter vmesna prodaja pridržane!

Stanje: rabljeno, Leto izdelave: 2019, Ogrevalna moč: 12 kW Dsdpfozbvhfox Ac Njch Temperaturno območje: 30 - 90 °C Mere (dolžina/širina/višina): 1.300 x 700 x 600 mm Največja polnilna teža mrežaste škatle: 800 kg Obratovalne ure: pribl. 100 h Dimenzije D x Š x V: 1,5 x 1,5 x 1,5 m Teža: 500 kg Po naši oceni je stroj v dobrem rabljenem stanju in ga je mogoče po predhodnem dogovoru pregledati pod napetostjo. Dodatna oprema, prikazana orodja in vpenjalni elementi so vključeni le, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih in informacijah ter vmesne prodaje!

Stanje: rabljeno, Novo: Ne Splošno stanje: zelo dobro Tehnično stanje: zelo dobro Videz: zelo dobro Država proizvodnje: CH Za več informacij se obrnite na podjetje Vink Machinery. Menzi Muck cilindri * Dvostranskega delovanja * Opremljen z dvema nepovratnima ventiloma * Premer cilindra: 60 mm Dodpex Aiy Nsfx Ac Nech * Oko cilindra: 50 mm notranji premer * Razmak osi v izvlečenem položaju: 1070 mm * Razmak osi v zaprtem položaju: 700 mm * Cena na kos!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, nosilnost: 1.400 kg, Glaslift KS Robot 1400 Dcodsyir Azspfx Ac Njh Leto izdelave: 2016 Širina: 1310 mm Dolžina: 3350 mm Višina: 1700 mm Največja nosilnost: 1400 kg z daljinskim radijskim upravljanjem DGUV pregled do julija 2025 Ponudba je namenjena izključno podjetnikom v smislu §14 BGB.

Stanje: rabljeno, The plant is suitable for the agglomeration of thermoplastic films and fibers. Depending on the material, the throughput ranges between 500 kg and 1,000 kg/h. The plant consists of: • Feed conveyor belt • Load-dependent control system for the feed belt Dedpfxoy Timmj Ac Njch • Metal detector coil • HERBOLD cutting mill, type SMS 45/100-H5-3 • Pneumatic material transport to the buffer silo • Plastcompactor unit HV-70, which comprises buffer silo feed screw, plastcompactor, central blower, and cooling circuit • HERBOLD secondary cutting mill, type SML 45/100-S4-2 • Intensive cooling system • SZS II 630/200 conveying blower • Screening machine • Fines recirculation to the compactor silo • Material conveyor type MFT with Big Bag station and automatic diverter valve to on-site silo • Automatic exhaust air filter • Electrical control system • Compressor.

Stanje: rabljeno, Leto izdelave: 2010, x-axis travel: 450 mm y-axis travel: 400 mm Dedpfetqqqmjx Ac Noch z-axis travel: 320 mm Tool holder: HSK 63 Spindle speeds: 0 - 10,000 rpm Rapid traverse: 30 m/min Control: GE FANUC Series 16 i System for the machining of fittings, valve bodies, couplings, and similar components. Comprising: 1 used flexible manufacturing cell (transfer machine) by RIELLO, model VERTIFLEX VFX 450-2/1-0/1-V, year 2010, with 2 three-axis machining modules, each equipped with an 8-position tool turret. Travel ranges for Module 1: X1/Y1/Z1 = 450/400/320 mm Travel ranges for Module 2: X2/Y2/Z2 = 450/400/320 mm Tool holder for each module: HSK 63 Rotary table with two integrated workpiece holders diameter 400 mm each (B-axis for each workpiece holder: 360 x 1°), through-spindle coolant Accessories: chip conveyor, coolant system Connected by ABB handling robot with 1 used flexible manufacturing cell (transfer machine) by RIELLO, model VERTIFLEX VFX 450-2/2-0/1-V, year 2003, with 3 three-axis machining modules, each equipped with an 8-position tool turret. Travel ranges for Module 1: X1/Y1/Z1 = 450/400/320 mm Travel ranges for Module 2: X2/Y2/Z2 = 450/400/320 mm Travel ranges for Module 3: X3/Y3/Z3 = 450/400/320 mm Tool holder for each module: HSK 63 Rotary table with two integrated workpiece holders diameter 400 mm each (B-axis for each workpiece holder: 360 x 1°), through-spindle coolant Accessories: chip conveyor, coolant system youtu.be/vo4ZI_dvEZk

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, obratovalne ure: 120 h, Funkcionalnost: omejena funkcionalnost, For sale is a high-quality KEYENCE VHX-7000 digital microscope – a fully integrated system ideal for material analysis, defect analysis, quality control, research, and industrial inspection. The VHX-7000 combines ultra-high-resolution 4K imaging with intuitive operation and advanced measurement features, including automatic focus stacking, image stitching, 2D/3D measurements, and multi-angle observation. As one of the world’s first digital 4K ultra-high-precision microscopes, this system delivers exceptional, SEM-level image quality while offering the speed and user-friendliness of optical microscopy. Included configuration: Main System: KEYENCE VHX-7000 Controller Unit Camera: KEYENCE VHX-7020 High-Performance Camera Optics & Adapters: KEYENCE VH-Z20T Zoom Lens / Objective (20x–200x) KEYENCE VH-K20 360° Multi-Function Side View Adapter KEYENCE VHX-20T Stand Adapter Mechanical Components: KEYENCE VHX-S750E Motorized XYZ Stage (40 mm) Software & Accessories: KEYENCE VH-H5M 3D Measurement Software KEYENCE VHX-A70D Control Console for the VHX-7000 Swiss Power Cable/Adapter Original Manuals Dodpfx Acey U Iy Io Nsch Key Features: 4K Ultra HD Imaging Seamless magnification from 20x to 6000x Fully motorized operation Multi-directional illumination Real-time 3D and surface roughness analysis Automated focusing and positioning User-friendly touchscreen operation Ideal for industrial inspection, electronics, materials science, metallurgy, and R&D laboratories.

Stanje: dober (rabljeno), Leto izdelave: 1995, Dvižni sistem, Kardex, dimenzija police: 1250x825 mm, višina 7 m – rabljeno - : Djdpfoyrqvfox Ac Nsch Cena na lokaciji: 13.950 € (neto), demontirano, zapakirano in naloženo, dodatno prevoz in ponovna montaža! Proizvajalec: Bellheimer / Kardex Tip: Shuttle 1250x825x10000 Številka naprave: 95.008812/001 Leto izdelave: 1995 Dimenzija police: 1250x825 mm Višina naprave: pribl. 7 m Globina: pribl. 2,70 m Širina: pribl. 1,6 m Število polic: 44 kosov Dovoljena skupna nosilnost: 2x10.000 kg Dovoljena nosilnost police: 250 kg 3x400V, A: 3x5,2, KW 3,6 Stanje: rabljeno Na voljo: od pribl. 13. tedna 2026 Lokacija: Speyer

Stanje: rabljeno, Slotted spindle 1 pc. Number of milling units: 5 pcs. Spindle diameter: 50 mm Weinig Unicontrol 11 window line including a wide range of tools ----- Optionally available (with additional charge) - Weinig Univar 6 profile beading machine (price on request!) - Götzinger PowerDrill drilling and milling center for windows and doors (price on request) Technical manufacturer description: ----- Pos. 1: Weinig Unicontrol 11 window line ----- Including existing tools - IV 67 wood and wood-aluminum - IV 77 wood and wood-aluminum - IV 90 wood Crosscut saw ----- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed electronically adjustable with brake 3,000–6,000 rpm. Max. tool swing diameter: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment pneumatically to 8 positions for top edge rounding Horizontal lower rounding unit ----- Motor with brake: 1.5 kW, spindle diameter 20 mm, clamping length 25 mm, speed 9,000 rpm Max. tool swing diameter: 130 mm Axial travel mechanically coupled with crosscut saw Radial travel pneumatically controlled Mortising and slotted spindle ----- With hydraulically clamped counter bearing Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,800 rpm Max. tool swing diameter: 400 mm Tool clamping length: 640 mm Axial travel NC axis Standard position below table: 5–10 mm Radial travel: fixed 1st profile spindle (conventional and climb milling) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool swing diameter min. 140 mm, max. 232 mm Tool clamping length: 400 mm with counter bearing Axial travel 350 mm NC axis Radial travel NC axis Standard position below table: 5–10 mm 2 feed rollers opposite the spindle, axially pneumatically controlled, 8 positions Vertical upper profile milling unit ----- Motor power with brake: 3.7 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 9,000 rpm Max. tool swing diameter: 130 mm Pneumatic adjustment to 8 axial and radial positions 2nd profile spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool swing diameter min. 140 mm, max. 232 mm Tool clamping length: 400 mm with counter bearing Axial travel 350 mm NC axis Radial travel NC axis Standard position below table: 5–10 mm Indexed guide fence at the stop with sash bar support strip 2 feed rollers opposite the spindle, axially pneumatically controlled, 8 positions Vertical right-side profile milling unit at machine end ----- Dodpey T R Tuefx Ac Nech Motor power with brake: 3.7 kW Spindle diameter: 40 mm Clamping length: 160 mm Spindle speed: 5,850 rpm Tool swing diameter min. 112 mm, max. 210 mm Pneumatic adjustment to 8 axial and radial positions Horizontal lower profile milling unit ----- Motor power with brake: 3 kW Spindle diameter: 40 mm Clamping length: 125 mm Spindle speed: 5,850 rpm Tool s...

Stanje: rabljeno, Slotted spindle 1 0 Number of milling units: 2 pcs. Spindle diameter: 40,50 mm Position 1: Okoma angle combination UF1 S and Position 2: Rebating machine UF2 EG including Position 3: Tooling IV78 wood, IV78 wood exterior doors, IV78 wood-aluminum windows Gutmann with straight and inclined cheek For sale on behalf of a customer ----- Technical manufacturer’s description: Pos. 1: Okoma UF 1 S slotting and profiling machine – Rebating machine ----- Compact, heavy-duty window processing center with cast-iron construction, consisting of: Crosscut saw with top-mounted blade, 12-position turret stops, positively guided blade guard for accident prevention Slotting spindle: 40 mm diameter x 252 mm, dual-stroke for 3 tool positions (stroke height 83 mm), 7.5 kW motor Roller table, adjustable on both sides 0-60 degrees automatic feed with various infinitely adjustable feed speeds, double pneumatic clamping, length stop LAS 3-position system, 2300 mm automatic transfer to profiling section Profiling spindle: 40 mm diameter x 252 mm pneumatic stroke 112 mm (adjustable) for 2 tool positions 7.5 kW motor, spindle horizontally adjustable to the tool’s working edge, front milling stop jaw adjustable glazing bead saw, 3 kW motor, 4-position turret head adjustment, heavy-duty articulated feed, infinitely adjustable 0-25 m/min, roller sets can swivel inwards and outwards, back gauge with 5-position turret head frame milling device ----- Pos. 2: OKOMA rebating center Model UF 2 EG ----- Energy data: - Operating voltage: 3 phase, 380 V, 50 Hz. - Compressed air: Air consumption 13 NL/cycle; operating pressure: 8 bar Conditioned air: per Pneurop 6611 1. Profiling spindle 1: - Spindle arrangement: right - Power 11 kW - Speed 7000 rpm - Direction of rotation: climb and conventional cutting - Spindle diameter 50 mm - Usable length 272 mm - Max. tool diameter 230 mm - Vertical movement of the profiling spindle Drive: pneumatic cylinder, 90 mm stroke for 3 tool positions Position sensor: limit switch - Horizontal movement Drive: pneumatic cylinder forward-backward Position sensor: limit switch - Automatic plunge-cutting: Plunge speed adjustable for splinter-free rebating - Protective and extraction hood with 140 mm connection 2. Profiling spindle 2: - Spindle arrangement: right - Power 11 kW - Speed 7000 rpm - Direction of rotation: counter-cutting - Spindle diameter 50 mm - Usable length 272 mm - Max. tool diameter 230 mm - Vertical movement of the profiling spindle Drive: pneumatic cylinder, 90 mm stroke for 3 tool positions Position sensor: limit switch - Horizontal movement Drive: pneumatic cylinder forward-backward Position sensor: limit switch - Protective and extraction hood with 140 mm connection 3. Hardware milling device EG: - Spindle arrangement: right - Drive: three-phase motor 3 kW - Speed 6000 rpm - Spindle diameter 30 mm - Usable length 47 mm - No vertical positioning - Horizontal positioning Dodsy T R Tbepfx Ac Nech Drive: pneumatic cylinder forward-backward Position sensor: limit switch (rear only) - Protective and extraction hood with 80 mm connection Stop: - 1st stop: in front of spindle 1, manual chip removal, quick adjustment via parallelogram - 2nd stop: between spin...

Stanje: rabljeno, 1 kos sistem za povezovanje CNP CANAPA 35 220V Dsdpfx Asy Tkiisc Noch Barva: kot prikazano, po slikah in ogledu Dimenzije D/Š/V: 90x60x76cm Stanje: rabljeno

Stanje: dober (rabljeno), Leto izdelave: 1999, številka stroja/vozila: 0118703/99-1, Funkcionalnost: popolnoma funkcionalen, moč: 55 kW (74,78 KM), vhodna napetost: 400 V, vrsta vhodnega toka: Enosmerni tok, volumenski pretok: 1.200 m³/h, premer sesalne cevi: 150 mm, filtrirna površina: 8 m², À vendre, une installation d’aspiration Bristol 'TF' B 250. L’appareil est en bon état et immédiatement opérationnel. Type d’appareil : installation d’aspiration Modèle : BRISTOL 'TF' B 250 Puissance moteur : 0,55 kW Débit volumique : 1 200 - 1 500 m3/h Tension d’alimentation : 400V / 50Hz Diamètre buse d’aspiration : 150 – 200 mm Domaines d’application : brouillard d’huile, brouillard d’émulsion, poussières Année / N°Série : 1999 / 0118703/99-1 Transport et chargement organisables dans toute l’Europe en supplément et sur demande. Prix hors TVA. Visite possible sur rendez-vous. N’hésitez pas à nous contacter, notre équipe se tient à votre disposition pour tout renseignement. Reprise ou échange possible ! Achat / vente de machines ACHAT / VENTE DE MACHINES DE PRODUCTION & D’USINAGE DES MÉTAUX, ETC. Vous recherchez une machine d’usinage du métal de qualité à prix avantageux pour votre production ? Ou souhaitez-vous vendre la vôtre ? Plus d’informations et de moyens de contact sur notre site internet. Dcodpfx Acjy R Ax Rj Noh

Stanje: rabljeno, Leto izdelave: 2016, merilno območje os X: 300 mm, merilno območje osi Y: 250 mm, merilno območje os Z: 150 mm, Koordinatni merilni stroj za enostaven nadzor delov neposredno v proizvodnji. Merilni postopki so lahko vizualno prikazani korak za korakom tudi za neizkušene operaterje. Naprava je bila kupljena leta 2016, v uporabi pa je bila le kratek čas, saj ni bila primerna za načrtovano uporabo. Je v skoraj novem stanju, v originalni embalaži. Znamka: Keyence Tip: XM-1000 Letnik: 2016 Merilno območje: 300 x 250 x 150 mm Ponovljivost: +- 3 µm Merilno odstopanje: +- 8 µm Oprema: - Merilni sistem XM-1000 - Merilni računalnik XM-1500 Dcedpjzbvqyjfx Ac Njh - Merilna sonda XM-P1000 - Več tipal / kroglic - Dokumentacija - Originalna embalaža

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used, among others, in: • quality control (QC) • end-of-line production testing • OEM laboratory and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 Dsdpfsyc H N Nex Ac Nsch • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last ETL factory calibration: 05/2023 • Weight: 38 kg ⸻ Included equipment / scope of delivery • Main unit ATS 400 X8 with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test cables and accessories (see photos) • Manufacturer documentation • Original markings, nameplates, CE certified ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • Ready for immediate use in a production environment • No signs of tampering, all connectors and interfaces complete

Stanje: zelo dobro (rabljeno), Naprodaj profesionalni digitalni višinomerni instrument Mitutoyo (model 192-613) – japonska natančnost in zanesljivost v eni napravi. Idealen za delavnice, kontrolo kakovosti in natančne meritve. Specifikacija: • Merilno območje: 0–300 mm Dodpfxsw N Hn Se Ac Nech • LCD-zaslon – dobro berljivi prikazi tudi pri slabši svetlobi • Funkcije: ZERO/ABS, PRESET, HOLD • Napajanje: baterija CR2032 • Stabilna osnova za zanesljivo oporo in natančne meritve • Original – Izdelano na Japonskem Stanje: Naprava je popolnoma delujoča, lepo ohranjena,

Stanje: dober (rabljeno), For sale: WTW PH96 meter in good condition. Dodpfxovdxu No Ac Nech

Stanje: zelo dobro (rabljeno), HOMMEL WERKE LV-50E surface roughness measuring device. Dedpevdybdjfx Ac Njch

Stanje: zelo dobro (rabljeno), For sale: SaluTron D2 Coating Thickness Gauge. Dsdpfjvbwy Esx Ac Nsch

Stanje: dober (rabljeno), Prodajam merilnik pritisne sile HKM 5000N/500KG. Dcjdpfx Acsvbwyls Neh

Stanje: zelo dobro (rabljeno), For sale: Measuring device, Carbidoor, HSAFS. Dcodpjvdx U Njfx Ac Njh

Stanje: zelo dobro (rabljeno), For sale: WTW LF320 meter, fully functional and in good condition. We can assist in arranging a cost-effective shipping company or courier service for you. Dcedpfjvdx Nyox Ac Njh

Stanje: zelo dobro (rabljeno), Ponujamo profesionalni 3D optični merski sistem KEYENCE VL serije, namenjen hitremu in natančnemu skeniranju tehničnih delov. Komplet je idealen za kontrolo kakovosti, povratni inženiring in brezkontaktne meritve v industriji. Vključuje: – Skenirna glava VL-370 Stanje: zelo dobro, oprema vzdrževana Opomba: komplet se prodaja brez monitorja / PC enote (možnost samostojne nadgradnje) Proizvodnja: Izdelano na Japonskem Dedpfjyc H Npsx Ac Noch

Stanje: zelo dobro (rabljeno), Nudim profesionalni lepilni agregat BÜHNEN 6040, namenjen za industrijsko nanašanje lepil (npr. hot-melt). Naprava rabljena, v dobrem tehničnem stanju, z običajnimi sledmi uporabe. Zanesljiva nemška izdelava – idealno za proizvodne obrate, pakirnice, mizarje, tapetnike ipd. ⚙️ Tehnični podatki (iz tablice / vidni na fotografijah) Napajanje: 230V / 50 Hz Moč: 235 W Maks. tlak: do 160 bar Maks. temperatura: do 200°C Dcsdpfsy Aagiex Ac Neh Model: 6040 Proizvajalec: BÜHNEN GmbH (Nemčija) 📦 V kompletu: ✔️ Lepilni agregat BÜHNEN 6040 ✔️ 4 ogrevane cevi (komplet) ✔️ Kabli/priključki vidni na slikah ✔️ Krmilni in priključni elementi 🔍 Tehnično stanje: naprava rabljena vidne običajne sledi uporabe brez vidnih mehanskih poškodb notranjost rezervoarja vidna na fotografijah prodaja točno tako, kot na slikah