Victor Taichung Vturn-A26Y Oś Y nakup rabljenega (29.157)

Stanje: rabljeno, prevoženi kilometri: 587.105 km, moč: 290 kW (394,29 KM), prva registracija: 05/2016, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, naslednji pregled (TÜV): 02/2027, barva: srebrn, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: klimatska naprava, parkirni grelec, * Multifunkcijski volan * Klimatska naprava * Ležišče za spanje * Hladilnik * Tempomat * Sistem za opozarjanje pri zapuščanju voznega pasu * Sistem za pomoč pri speljevanju v klanec * Listnata/zračna vzmet * Dodatni pogon * Hidravlika * Prazna teža: 7.170 kg * Tehnični pregled: 02.2027 Hodpozn Hdpefx Al Dsu * Registracija: 08.2026 -----Notranja številka vozila: 12336 Pridržana pravica do sprememb in napak.

Stanje: zelo dobro (rabljeno), Here we offer you an FRT MicroSpy Mobile. Hsdpfjzdnqcex Al Deu Device designation: FRT MicroSpy Mobile Art. No. MSP 105 00 Device number: MSP1033 FRT MicroSpy Mobile Portable Optical Profilometer for non-destructive 3D surface measurements directly on the component. The MicroSpy Mobile is ideally suited for mobile use thanks to its portability, making it perfect for onsite measurements on heavy machinery, vehicles, rollers, glass panes, or other large components. This enables high-resolution, non-destructive measurements of key surface characteristics such as roughness, contour, topography, layer thickness, wear, bearing ratio, or volume directly onsite. Smaller samples can be measured directly on the measuring table. Suitable for use on large construction and machine parts Excellent resolution values Outstanding reproducibility Non-destructive measurement Handles and adjustable support feet Low weight (approx. 5 kg) FRT Technical Specifications: Device: MicroSpy Mobile XY range: 50 x 50 mm² XY Table Type: compact XY cross table with open frame Bearing: mechanical crossed roller guide Drive: DC motor with ball screw Travel (measurement area XY): 50 x 50 mm² (or 20 x 20 mm² with CWL 3mm) Position measuring system: rotary encoder System resolution: 0.25 µm XY-repeatability: < ± 1 µm Table deviation per axis: < 2 µm / 50 mm (non-reproducible part: < 0.5 µm) XY squareness: < 4 µm / 50 mm Z-axis, motorized: Type Bearing Drive Travel Position measuring system System resolution Axis play Manual coarse adjustment: Type: dovetail guide with fine adjustment Adjustment range: 25 mm Measurement: Minimum point spacing XY: 1 µm Sample size: - Sample weight: - Minimum measuring speed: 1 µm / sec Maximum measuring speed: 50 mm / sec Complete system: Total weight: approx. 150 kg Measuring setup: approx. 5 kg System footprint: approx. 0.3 x 0.3 m² Control unit dimensions (W x D x H): approx. 0.65 x 0.65 x 1.0 (1.6) m³ Power supply EU version: 110 - 240V, 50 - 60Hz, up to 16A Power supply US version: 110 - 240V, 50 - 60Hz, up to 16A Power consumption: typically 300-400 W Compressed air supply: - Ambient temperature: 22°C ± 5°C Temperature stability: < 0.5°C/h Ambient conditions: measuring room Scope of delivery: 1 x XY table with 50 x 50 mm² travel 1 x Mobile sub-frame with electronics 1 x Chromatic sensor FRT CWL 600 µm 1 x Electronics for chromatic sensor 2 x Keys for computer 2 x Keys for back door 1 x Cold appliance cable for main supply 1 x Mouse (PS/2) 1 x Keyboard 1 x 19'' TFT monitor Type: FRT MicroSpy Mobile Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) We are happy to answer any further questions by phone.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, Zapiralec kartonov, stroj za pakiranje, stroj za zapiranje kartonov, lepilni trak stroj, stroj za lepilni trak -Proizvajalec: Soco System, zapiralec kartonov tip T-55 -Širina kartona: maks. 550 mm Hodpfxezhv Rle Al Deu -Skupne dimenzije: 1100/800/1750 mm -Teža: 150 kg Ti podatki so standardni za ta model. Prosimo, vedno dodatno preverite podrobnosti ob ogledu. Stroj za kartoniranje Soco System T-55 je sodobna rešitev za pakiranje, zasnovana za učinkovito in hitro kartoniranje različnih izdelkov. S svojo napredno tehnologijo in robustno konstrukcijo je T-55 idealen za panoge, ki zahtevajo natančno in zanesljivo kartoniranje, kot so prehrambena, farmacevtska, kozmetična industrija ter industrija potrošniškega blaga. Zaradi kompaktne in ergonomske zasnove T-55 maksimira izkoriščenost talnih površin ter omogoča enostavno upravljanje in vzdrževanje. Njegova modularna konstrukcija omogoča prilagodljivost pri konfiguraciji, kar omogoča brezhibno vgradnjo v obstoječe proizvodne linije in prilagajanje spreminjajočim se zahtevam pakiranja. Stroj T-55 omogoča vsestransko ravnanje s kartoni, saj sprejme različne velikosti in vrste kartonov, vključno z ravno zaprtimi, povratno zaprtimi in z lepilom zatesnjenimi kartoni. Uporablja napredno avtomatizacijo in servopogone za natančno oblikovanje, polnjenje in zapiranje kartonov, s čimer zmanjšuje izpade v proizvodnji ter povečuje produktivnost. Opremljen z intuitivnimi kontrolami in uporabniku prijaznim vmesnikom, T-55 omogoča operaterjem enostaven dostop do nastavitev stroja in diagnostike, kar omogoča hitro nastavitev in preklop med različnimi formati kartonov. Poleg tega stroj vključuje varnostne funkcije za zaščito operaterjev in preprečevanje poškodb izdelkov med delovanjem. Na splošno je stroj za kartoniranje Soco System T-55 zanesljiva in učinkovita rešitev za pakiranje, ki izpolnjuje zahteve sodobnih proizvodnih okolij in zagotavlja dosledno visoko kakovost kartoniranja.

Stanje: rabljeno, prevoženi kilometri: 105.942 km, moč: 375 kW (509,86 KM), konfiguracija osi: 6x6, barva: rjava, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, Leto izdelave: 2021, Oprema: ABS, EBS (Elektronski zavorni sistem), klimatska naprava, For inquiries regarding the vehicle, Mr. Seidel will be happy to assist you (by phone). Hsdpfx Aleyfvrxo Dju Mercedes-Benz Arocs 3351 LS Tractor Unit + Forestry Crane Crane: Palfinger S260Z96, 3,106 operating hours, A1E Front axle 9.0 t, A1W Differential lock on front axle, A2G Rear axle, ring gear 300, planetary, 13.4 t, A5Y Axle ratio i = 4.333, B1B Electronic braking system with ABS and ASR, B1Z ABS, deactivatable, B2B Drum brakes on front and rear axles, B2X Parking brake, electronic, B2Z Parking brake also on front axle, B4M Air reservoir, steel, C0G Frame overhang 1050 mm, C2I Wheelbase 4200 mm, D0E Steering wheel, diameter 500 mm, D0S Compressed air connection in cab, D1C Driver's comfort air-suspension seat, D1N Co-driver's functional seat, D2N Fold-down seat back, driver's seat, D3B Comfort bed, lower, D3Q Velour seat covers, D4T Curtain, across bed(s), D4Z Sun blinds, side, driver and passenger, D6C Electric stationary air-conditioning, D6G Automatic climate control, D6I Residual heat utilization, D6M Additional hot water heating, cab, D7A Additional thermal insulation, D7G Storage compartment lid, driver and passenger side, D7R Storage flaps above windscreen, D7V Table on passenger side, D7Y Luggage shelf, upper part of rear wall, D8N Electric lift-up roof, E4B Interface, Fleet Management System (FMS), E5H Night driving light switch, E6A Trailer interface 24 V, 15-pin, E6Z Reverse warning, E9G Preparation for electrical devices, F0G Side module, N3G Vehicle, F1W L-cab, StreamSpace, 2.30 m, tunnel 320 mm, F4X External storage compartment flap, left, F5L External sun visor, transparent, F5Y A-pillar trim, F6C Tinted windscreen, F6I Heated front mirror, F6Q Air horn, F6T MirrorCam, F7B Bumper, corners in steel, F7D Bumper middle section towing attachments, coupling jaw, F7Y Cab entry left/right, movable, F8E Locking system with central locking, F8F Comfort locking system, F8V Light sensor, F8W Rain sensor, G0A Drivetrain, 44 t to 68 t, G0R Gearbox mounting arms, optimized for removal, G0T Predictive Powertrain Control, G0W Offroad driving program, G2F Gearbox G 330-12/11.63-0.77, G4E Transfer case VG 3000-3W, 1.04 selectable, G5B Twin-plate clutch, G5G Mercedes PowerShift 3, I2H Tubeless tires, 315/80 R 22.5 rear axle, I2P Tubeless tires, 385/65 R 22.5 front/leading/non-leading axle, I4J Wheel configuration 6x6, I5H 33.0-tonner, I6I Vehicle manufacturing plant Wörth, J1O Digital tachograph, 2nd generation, ADR, J1S Tachograph manufacturer VDO, J2K Loudspeakers, 2-way system, J2U Navigation system, J3U Requirement Fleetboard Manager App, J3V Truck Data Center 7, J6C Multimedia cockpit, interactive, J6Y Remote online, J6Z Pre-installed Mercedes-Benz Truck App Portal, J8Y Pre-installed for Truck Data Center 7, J9A Pre-installation for CB radio, 12 V, DIN slot, J9D Pre-installation for toll collection, J9P Pre-installation and display for up to 4 cameras, JAAY Axle distance after moving 2nd rear axle, 1450 mm, JBWZ Adjustment AO air reservoir, JBXJ EAPU offset, to drawing number 'X', JC0E Frame overhang 950 mm, JCDA Stabilizer for conversion to air suspension, rear axle, JCMX Shortened overhang, JJ3Z Axle load measuring system, JKVT Tank, offset to dimension 1925 mm, JQ3Y Frame lowering, without residual air pressure control, JQHL Air suspension on rear axle, with ENR, K3V AdBlue tank 60 l, left, K5A Tank 290 l, left, 650 x 565 x 950 mm, steel, L1I Fog lights, LED daytime running lights, L2H Side marker lights, flashing, L9A Pre-installation for roof

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 816.107 km, moč: 411,88 kW (560,00 KM), prva registracija: 04/2016, vrsta goriva: dizel, skupna masa: 26.000 kg, velikost pnevmatike: 315/80 R22,5, konfiguracija osi: 6x2, medosna razdalja: 4.200 mm, gorivo: dizel, zavore: retarder, barva: modra, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, Leto izdelave: 2016, obratovalna teža: 26.000 kg, Kabina Hi Way z zračnim vzmetenjem, modra kovinska barva. Motor Cursor 13, 560 KM, emisije Euro 6, menjalnik Eurotronic, 12 prestav, ZF intarder, navigacija, hladilnik, stacionarna klima, medosna razdalja 4200 mm, leto registracije: 04/2016, prevoženih km: 816.107, dvigalo DN Cranes 24000, 5 izvlekov z daljinskim upravljanjem, fiksna nadgradnja 5200 mm z aluminijastimi stranicami TR1H80, vlečna kljuka, nova nadgradnja. Hjdpfx Alsxca T Ts Dju

Stanje: rabljeno, barva: drugo, prva registracija: 01/2006, Leto izdelave: 2005, Lastnost vozila brez tovora: 350 kg. Na zalogi imamo več kot 100 osi. Če ne najdete, kar iščete, nas kontaktirajte. Hsdpfx Aleya U Uho Deu

Leto izdelave: 2015, stanje: zelo dobro (rabljeno), Spectra-Physics Spirit dvostopenjski frekvenčni femtosekundni laser. High Q Laser GmbH, p/n: 06900 fR Rack LCR1. Rabljena naprava v zelo dobrem stanju. Odstranjena iz vodilnega farmacevtskega podjetja v Corku, Irska. Prodaja se v videnem stanju. Hodsym Dtaepfx Al Dou

Leto izdelave: 1990, stanje: rabljeno, Odmikalo Hsdpezzpw Sjfx Al Dsu

Stanje: rabljeno, prevoženi kilometri: 366.769 km, moč: 309 kW (420,12 KM), prva registracija: 10/2011, vrsta goriva: dizel, lastna masa: 9.630 kg, največja dovoljena obremenitev: 16.370 kg, skupna masa: 26.000 kg, velikost pnevmatike: 315/80 R22,5, gorivo: dizel, zavore: intarder, barva: rumena, voznikova kabina: drugo, vrsta prenosa: samodejen, emisijski razred: noben, vzmetenje: drugo, število sedežev: 2, skupna dolžina: 9.500 mm, Leto izdelave: 2011, gradbena višina: 4.000 mm, število postelj: 1, Oprema: ABS, klimatska naprava, nadzor oprijema, računalnik na krovu, spojka prikolice, Shifts up to 2nd gear. The used Iveco STRALIS AS 260 S42 is a reliable truck of emission class Euro 5, ideally suited for commercial operators in sectors such as agriculture and export. With a powerful 309 kW (420 HP) engine and a displacement of 10,308 cc, it delivers impressive performance. The truck features an automatic transmission and has a mileage of 366,769 km. Hsdpfx Aoupac Isl Deu First registered in October 2011, the vehicle is in good condition and comes with a green emissions sticker. The yellow metallic paint gives the vehicle a striking appearance. Practical features such as a steering axle, lift axle, and INTARDER system enhance handling and safety. Additionally, the built-in air conditioning ensures driving comfort. This Iveco truck has an overall height of 4,000 mm, a width of 2,500 mm, and a length of 9,500 mm, with a gross vehicle weight rating of 26,000 kg. For transportation tasks, the vehicle offers various loading options and a trailer coupling (AHK). Interested buyers can view the vehicle without an appointment from Monday to Friday or on Saturdays. Sale only to commercial customers (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Stanje: rabljeno, prevoženi kilometri: 626.986 km, moč: 338 kW (459,55 KM), prva registracija: 01/2018, vrsta goriva: dizel, velikost pnevmatike: 385/65r22,5, konfiguracija osi: 6x2, medosna razdalja: 2.650 mm, gorivo: dizel, kapaciteta rezervoarja za gorivo: 490 l, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, Leto izdelave: 2018, Oprema: električno upravljanje oken, hladilnik, klimatska naprava, Tehnične informacije Število valjev: 6 Prostornina motorja: 10.677 cm³ Pogonski sklop Pogonska vrsta: na kolesa Hsdpfx Aoztnnasl Deu Vrsta motorja: Mercedes-Benz OM470 LA Konfiguracija osi Sprednja os: Dimenzije pnevmatik: 385/65R22,5; Vzmetenje: listno vzmetenje Zadnja os 1: Dimenzije pnevmatik: 315/80R22,5; Vzmetenje: zračno vzmetenje Zadnja os 2: Dimenzije pnevmatik: 315/80R22,5; dvojne pnevmatike; Vzmetenje: zračno vzmetenje Mase Lastna teža: 8.437 kg Nosilnost: 17.563 kg Dovoljena skupna masa: 26.000 kg = Dodatne možnosti in oprema = - Hidravlični sistem za nagib - PTO (odvzemna moč)

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 529.000 km, moč: 205 kW (278,72 KM), prva registracija: 03/2006, vrsta goriva: dizel, največja dovoljena obremenitev: 4.770 kg, skupna masa: 11.990 kg, konfiguracija osi: 2 osi, gorivo: dizel, zavore: zaviranje z motorjem, barva: vijolična, voznikova kabina: spalna kabina, vrsta prenosa: mehanski, emisijski razred: noben, vzmetenje: jeklo-zrak, število sedežev: 2, skupna dolžina: 9.450 mm, skupna širina: 2.550 mm, skupna višina: 3.600 mm, prostornina tovornega prostora: 42 m³, dolžina tovornega prostora: 7.100 mm, širina tovornega prostora: 2.450 mm, Leto izdelave: 2006, Oprema: klimatska naprava, registracija tovornjaka, servovolan, tempomat, NASLOV: 13089 Berlin, Pankow Motor in menjalnik delujeta/preklapljata brezhibno. Menjalnik z 8/9 prestavami. Hjdpfx Alozwxmbo Dsu 7,1 m dolga nadgradnja z dvižno platformo (nosilnost 1,5 t). Zračno vzmetenje zadnje osi. Priklopna naprava. Zaklep diferenciala. Kabinna različica za dolge prevoze, z ležiščem. Samostojna grelna naprava. KLIMA. Kamera za vzvratno vožnjo. Možna dostava.

Stanje: rabljeno, CNC STROJ ZA OBSTRANJEVANJE TACCHI HD 3/140L – OS C – OS Y – CNC SIEMENS 840 C RAZDALJA MED VRTOVIMA: 8000 MM PREMER OBSTRANJEVANJA NA POSTELJI: 2000 MM PREMER OBSTRANJEVANJA NA PREČNI PODVOZIJU: 1550 MM Hodpfezzv Spox Al Dou HOOD OS Y: 500 MM PREMER VRTOVINE: 150 MM MOČ MOTORJA VRTOVINE ZA STROJNO OBSTRANJEVANJE: 22 kW – 1800 OBRATOV AVTOMATSKA REVOLVERNA GLAVA Z 4 POZICIJAMI

Stanje: rabljeno, prevoženi kilometri: 490 km, moč: 375 kW (509,86 KM), konfiguracija osi: 6x4, barva: zelen, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, vzmetenje: zrak, Leto izdelave: 2026, Oprema: ABS, EBS (Elektronski zavorni sistem), klimatska naprava, Za povpraševanja glede vozila vam bo pomagal gospod Seidel (telefonska številka na voljo). Hsdpfoyfpwnsx Al Dju Mercedes-Benz Arocs 2651 L 6x4, tovornjak za prevoz krajših hlodov NADVOZ SCHEMEL za krajše hlodovine, proizvajalec: EBERT, mere: pribl. 6.750 mm med čelno steno in žerjavom, 4 EXTE opore D6 – pomične z objemno pritrditvijo in zategovalnimi pasovi ali stranskim opornikom za pritrditev tovorja, z 8 EXTE prečkami D5 – teleskopsko nastavljive, s posebnim pomožnim okvirjem v obliki črke Z, 200 mm visok, v sredini okvirja, zaprt z valovito pločevino, čelna stena – varjena konstrukcija z notranjimi posebnimi aluminijastimi profili, višina pribl. 2.600 mm, 4-delna zložljiva in teleskopsko nastavljiva ponjava za prevoz lesa, kakovostne verige in cevi za transport lesa, s stopnicami za lažji dostop, montaža stranskih opozorilnih luči, dostop do žerjava, dvojni priključki za stisnjeni zrak, pokrov nad akumulatorsko škatlo in rezervoarjem zraka z aluminijasto rebrasto pločevino na obeh straneh, električni in hidravlični priključek (vklop/izklop motorja iz sedeža žerjava), s ventilom za zapiranje olja, s pokrovom za varjenje za motorno žago itd., nosilec za snežne verige, nosilec za metlo in lopato na čelni steni, nadvoz pobarvan s temeljnim premazom, črna barva šasije vozila, temeljni premaz iz epoksi smole in premaz z akrilno barvo, polnjenje z oljem, tehnični pregled – pregled za varnost in zdravje pri delu (UVV) – preizkus tahografa z: Palfinger-EPSILON žerjav, model Y CRANE ON 2 M 12 Z91 – popolnoma hidravlični žerjav za les M12Z EPSILON žerjav, žerjav je zložen na stran, oprema HIC/HD4/04, osnovna enota in stolp žerjava pobarvani v RAL 7021 črno-sivo barvo, hidravlične cevi zaščitene, vgrajeno stikalo za vklop in prikazovalnik intervalov vzdrževanja MZ91_2 Žerjav z roko v obliki črke Z, dolžina: 9,1 m, doseg: 9,1 m, neto moment upogibanja: 107 kNm, največja moč: 107 kNm HHC_2 Višinski sedež z odstranljivim ročnim upravljalnikom, vključno z mehanskim mehanizmom za obračanje na stolpu žerjava (brez vrtljivega nosilca), B1B elektronski zavorni sistem z ABS in ASR, B1F gretje, elektronska naprava za oskrbo s stisnjenim zrakom, B1H elektr. oskrba in nadzor s stisnjenim zrakom, srednja različica, B2A kolutna zavora, sprednji in zadnji osi, B2X parkirna zavora, elektronska, B2Z parkirna zavora, dodatna na prednji osi, B4A nadzor kondenzirane vode, za sistem s stisnjenim zrakom, B4M rezervoar za stisnjeni zrak, jeklen, B5A zavora prikolice, 2-žična, zavorne priključke na levi strani, C2R medosna razdalja 4800 mm, C4L previs šasije 2550 mm, C6J črpalka za pomoč pri krmiljenju, nereguliрана, C6Q stabilizator, sprednja os, C6U dodatni stabilizator, zadnja/sledilna os, D0A usnjen volan, D0S priključek za stisnjeni zrak, v kabini, D1C udoben sedež voznika, D1N funkcionalni sedež sopotnika, D2N naslon sedeža, odklepanje, sedež voznika, D3B komfortno ležišče, spodaj, D4T zavesa, prečna pred ležiščem(i), D4Y senčilo, stransko, na voznikovi strani, D5F LED ambientalna osvetlitev, D6G avtomatska klima, D6M dodatno ogrevanje z vročo vodo, kabina, D7A dodatna toplotna izolacija, D8N dvižno streho, električna, E3R vtičnica 24 V/25 A, prostor za noge sopotnika, E5H stikalo za nočno luč, E5K stikalo za MirrorCam, na ležišču, E6A vtičnica za prikolico 24 V, 15-polna, E6Z opozorilni signal za vzvratno vožnjo, E7F kabelski daljinski upravljalnik za vzmetenje z zračnimi vzmetmi, E9G priprava za električne naprave, F0F stranski modul, N3 vozilo, F0T Mercedesova zvezda, osvetljena

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23NEOS06, Exhibition Unit Stretch Wrapper ATLANTA NEOS ARYA system for automatic film blowing and cutting. 99 individually programmable settings Includes 1 remote control – additional units optional Wrapping height: 2150 mm Mast height: 2050 mm (fits through almost any door) Film powerstretch: 120–400% Motorized pre-stretch system with infinitely variable adjustment Pre-stretch ratio adjustable via control panel from 120 to 400% Film tension electronically monitored via control unit Quick-loading IEF system for easy film roll change Film specification: max. external diameter Ø300 mm – height: 500 mm – core Ø76 mm Automatic film cutting unit Film tension can be saved in 4 steps TECHNICAL DETAILS: Two maintenance-free AGM batteries 12 V – 100 Ah connected in series At least 160 pallets per charge – charging time: 8–10 hours High-frequency battery charger with LED display Wrapping height: “Machine with MAST (pallet included) 2,150 mm Height detection via photo sensor or direct input on display Safety bar for emergency stop of drive unit Emergency stop switch according to CE regulations Audible warning signal and beacon when machine starts Fall protection for film carriage Push button for start & stop Machine operation according to CE standards Ø22 mm Hjdpsyktv Sefx Al Deu ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All functional parameters adjustable via display - Program change lock - Adjustable machine speed around pallet up to 80 m/min Carriage speed up and down independently adjustable - Carriage up speed: 1.3 to 5.4 m/min - Carriage down speed: 1.3 to 5.4 m/min - Number of wraps at pallet base (1–10 layers) - Number of wraps at pallet top (1–10 layers) - Adjustable pallet wrapping height - Film application tension base & top wraps / ascent & descent independently adjustable - Film pre-stretch base & top wraps / ascent & descent independently adjustable - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL: 99 savable wrapping programs for SFERA EASY - Cross wrapping (up/down) - Single wrapping (only up or down) - Wrapping cycle with defined start and stop height - Wrapping to a preset height (with photo sensor deactivated) - Wrapping cycle for large-size pallets - Wrapping cycle for top sheet film - Soft start cycle for edge protection application - Wrapping cycle with reinforcement and adjustable number of wraps Soft start for reducing film tears at sharp pallet edges Wrapping cycle with manual or motor stringing (optional) Further machines available from stock in Ludwigsburg #Atlanta #Neos #Arya #Sfera #MobileWrapping #StretchWrapper

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 56.742 km, moč: 357 kW (485,38 KM), prva registracija: 11/2024, vrsta goriva: dizel, lastna masa: 8.390 kg, največja dovoljena obremenitev: 17.610 kg, skupna masa: 26.000 kg, velikost pnevmatike: 315/70 R 22,5, konfiguracija osi: 6x2, medosna razdalja: 4.800 mm, naslednji pregled (TÜV): 11/2026, gorivo: dizel, kapaciteta rezervoarja za gorivo: 710 l, zavore: intarder, barva: bela, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: zrak, število sedežev: 2, Leto izdelave: 2024, Oprema: ABS, AdBlue, EBS (Elektronski zavorni sistem), Tahograf, asistent za ohranjanje voznega pasu, centralno zaklepanje, električno nastavljivo ogledalo, električno upravljanje oken, elektronski program stabilnosti (ESP), filter saj, greljenje sedeža, klimatska naprava, meglenke, nadzor oprijema, nadzor tlaka v pnevmatikah, navigacijski sistem, parkirni grelec, računalnik na krovu, registracija tovornjaka, retarder, servovolan, sistem za pomoč pri speljevanju v klanec, spojka prikolice, tempomat, zapora diferenciala, Vehicle number #30848 Euro VIe Active Space Intarder Wheelbase 4,800 mm Full air suspension Tyres 315/70 R 22.5 710 ltr. tank Differential lock Hedpsy Sxinofx Al Dsu Hi-Tronix Air conditioning Parking heater Cruise control Traction control Lift axle Steering axle A3 SDG BDF chassis 7.45/7.82 Twist-locks Standard and low coupling towing hitch 2 bunks Climate comfort driver's seat/heated Refrigerator Electric roof hatch DAB infotainment system Navigation system ACC adaptive cruise control Lane Assist Emergency brake assist Hill start assist ESP Cab air suspension Sun visor Central locking with remote control Full LED headlights LED daytime running lights Cornering lights Fog/work lights Light/rain sensor On-board computer Multifunction leather steering wheel Eco-Roll Tire pressure monitoring Air horn Electric windows, dual Electric/heated exterior mirrors Rollers left and right Tool box Rear underrun protection, foldable Leasing or financing available on request!!

Stanje: novo, Pressure: 200 Bending length: 3200 mm Frame width: 2700 mm Installation height: 400 mm Stroke length (max.): 200 mm Hsdpfettxh Nox Al Deu Throat depth: 350 mm Dimensions (LxWxH): 3700 x 1700 x 2700 mm Weight approx.: 14,000 kg CNC Press Brake 3200 mm x 200 t Standard equipment: ----- Robust design CNC axes: Y1, Y2, X and R axis CNC crowning device, motorized, with CNC control CNC controller Original DELEM DA-58T, 15” touchscreen Backgauge with linear guide and ballscrew, with 4 stop fingers 2 sheet support arms Laser safety device on upper beam Quick clamping system for upper tool Upper tool system: Promecam Amada segmented gooseneck die Multi-V die system; both Promecam and Amada systems possible CE safety equipment

Stanje: novo, Pressure: 200 Bending length: 3200 mm Frame width: 2700 mm Installation height: 400 mm Stroke length (max.): 200 mm Throat depth: 350 mm Dimensions (LxWxH): 3700 x 1700 x 2700 mm Weight approx.: 14,000 kg CNC Press Brake 3200 mm x 200 t Standard equipment: Hodpfx Alotvhxms Dju ----- Robust construction CNC axes Y1, Y2, X, and R CNC crowning device motorized with CNC control Original DELEM DA 58 T 15" touchscreen CNC control Backgauge with linear guide and ball screw, 4 stop fingers 2 sheet support arms Laser safety device on upper beam Quick clamping system for upper tooling Upper tool system: Promecam Amada segmented and gooseneck Multi-V die system compatible with both Promecam and Amada systems CE-certified safety equipment

Stanje: novo, Pressure: 220 Bending length: 6050 mm Frame width: 5100 mm Installation height: 600 mm Stroke length (max.): 350 mm Throat depth: 450 mm Dimensions (LxWxH): 6775 x 2650 x 3250 mm Approx. weight: 18,000 kg 4 axes (Y1, Y2, X, R): Yes, all axes controlled via Esa S630 controller (2D graphical control) CNC crowning via control: Yes, through CNC crowning system, Esa S630 (2D graphical control) Motor power: 22 kW Technical Specifications XL 60220 | Parameter | Value | |-----|-----| | Bending length | 6050 mm | | Bending force | 220 t | | Downstroke speed | 100 mm/s | | Bending speed | 10 mm/s | | Return speed | 100 mm/s | | Stroke | 350 mm | | Installation/clear height (E) | 600 mm | | Throat depth (D) | 450 mm | | Frame width (B) | 5100 mm | | Machine length (L) | 6825 mm | | Machine width (W) | 2300 mm | | Width without front gauge (Y) | 1760 mm | Hjdpfx Aod Ehh Usl Dsu | Maximum height | 3010 mm | | Main motor | 22 kW | | Hydraulic tank capacity | 300 l | | Machine weight | 19,000 kg | The robust EUROPA XL press brake is characterized by its high precision, accuracy, and versatile applications. The Europa XL features a large installation height, allowing for a long stroke (cylinder travel). The throat depth is also above average, minimizing limitations during operation. We emphasize quality, which is also reflected in the controller. As standard, we equip the machine with the high-quality Esa S640 (2D graphical control). Furthermore, the KKI Europa XL press brake is outfitted with CNC axes Y1, Y2, X, and R, all managed via the control system. Of course, CNC crowning with Esa S640 (2D graphical control) is included. There are no compromises regarding the upper tool and die; the KKI EUROPA XL press brake is equipped with premium tooling from EUROSTAMP Italy. Naturally, every machine is only as good as its after-sales service. That’s why we place our emphasis on highly qualified staff with long-standing experience in the CNC sheet metal processing sector. - CNC axes Y1, Y2, X, and R - Esa S640 (2D graphical control) - Back gauge with double linear guide and ball screw - Motorized CNC-controlled crowning device - Heavy-duty version with height adjustment by handwheel; from 175 to heavy-duty on linear guide - Laser safety device on upper beam - CE protective equipment - Various options available Additional controllers: - ESA 640 2D 15'' touchscreen control: €4,520 (incl.) - ESA 675 W 3D 21'' touchscreen control (Windows base): €6,485 - DELEM 66 T 2D 17'' touchscreen control (Windows base): €10,165 - DELEM 69 T 3D 17'' touchscreen control (Windows base): €16,350 KK-Industries GmbH Something for everyone!

Stanje: novo, Pressure: 400Bending length: 4050mmFrame gap: 3550mmInstallation height: 650mmStroke (max.): 400mmThroat depth: 450mmDimensions (LxWxH): 5000x2770x3560mmWeight approx.: 23,950kg4 Axes (Y1, Y2, X, R): Yes, all axes controlled via Esa S640 (2D graphic control)CNC crowning via control: Yes, with Esa S640 (2D graphic control)Motor power: 45kWTechnical specificationsXL 40320UnitBending length4050mmBending force320tLowering speed125mm/sBending speed10mm/sReturn speed120mm/sStroke400mmInstallation/clear opening (E)650mmThroat depth (D)450mmFrame gap (B)3550mmMachine length (L)4780mmMachine width (W)2290mmWidth without front stop (Y)1760mmMaximum height3100mmMain motor30kWTank capacity400lMachine weight17500kg The powerful EUROPA XL press brake stands out for its high precision, accuracy, and versatile applications. The Europa XL features an extra-large installation height with a correspondingly large stroke (cylinder travel). The throat depth is also above average, providing ample working flexibility. We focus on quality, which is reflected in the control system. As standard, we offer the high-grade Esa S640 2D graphic control system. Furthermore, the KKI Europa XL press brake comes equipped with CNC Y1, Y2, X, and R axes managed via the controller. Naturally, the CNC crowning control via Esa S640 (2D graphic control) is included as well. We make no compromises on the upper tooling and die, outfitting the CNC press brake KKI EUROPA XL with premium tools from EUROSTAMP Italy. Of course, a machine is only as good as the service it comes with. That’s why we emphasize highly qualified staff with extensive experience in CNC sheet metal processing. CNC axes Y1, Y2, X, and R Esa S640 (2D graphic control) Back gauge with double linear guides and recirculating ball screw CNC motorized crowning device Heavy-duty version height adjustment with handwheel; from 175t, heavy-duty linear guide Laser protection system on the upper beam CE safety equipment Various options available Additional controllers: ESA 640 2D 15'' touchscreen control                                                               ¤   4,520 -- incl. ESA 675 W 3D 21'' touchscreen control (Windows based)               ¤   6,485 -- DELEM 66 T 2D 17'' touchscreen control (Windows based)               ¤ 10,165 -- DELEM 69 T 3D 17'' touchscreen control (Windows based)               ¤ 16,350 -- KK-Industries GmbH Hsded Ehiajpfx Al Dsu There’s something for everyone!

Stanje: novo, Pressure: 220 Bending Length: 4050 mm Frame Gap: 3550 mm Installation Height: 600 mm Stroke Length (max.): 350 mm Throat Depth: 450 mm Dimensions (LxWxH): 4740 x 2290 x 3050 mm Approx. Weight: 13,350 kg 4 Axes (Y1, Y2, X, R): Yes, all axes via Esa S630 (2D graphical control) CNC crowning via control: Yes, via Esa S630 (2D graphical control) Motor Power: 22 kW Technical Specifications Model: XL 40220 Unit Bending length: 4050 mm Bending force: 220 t Hedpfx Aljd Ehice Dou Approach speed: 140 mm/s Bending speed: 10 mm/s Return speed: 130 mm/s Stroke: 350 mm Installation/Daylight Height (E): 600 mm Throat Depth (D): 450 mm Frame gap (B): 3550 mm Machine Length (L): 4740 mm Machine Width (W): 2290 mm Width without front gauge (Y): 1730 mm Max. Height: 3050 mm Main Motor: 22 kW Hydraulic Tank Volume: 300 l Machine Weight: 13,200 kg Model KKI EUROPA XL The robust EUROPA XL press brake stands out for its high precision, accuracy, and versatile application possibilities. The Europa XL features a very large installation height and, as a result, a long stroke (cylinder travel). The throat depth is also exceptionally large to minimize restrictions. We focus on quality, which is also reflected in the control system. As a standard, we provide the high-quality Esa S640 (2D graphical control). Furthermore, the KKI Europa XL press brake is equipped with CNC axes Y1, Y2, X, and R via the control system. CNC crowning via Esa S640 (2D graphical control) is, of course, also included. With the top and bottom tooling, we make no compromises: the KKI EUROPA XL CNC press brake comes equipped with premium tools from EUROSTAMP Italy. Naturally, every machine is only as good as its service. For this reason, we place great importance on highly qualified personnel with many years of experience in CNC sheet metal processing. CNC Axes Y1, Y2, X, and R Esa S640 (2D graphical control) Backgauge with twin linear guides and ball screw Powered crowning device with CNC control Heavy-duty height adjustment via handwheel; heavy-duty linear guides from 175 t onwards Laser protection system on the upper beam CE-certified safety equipment Various options available Other Control Systems Available: ESA 640 2D 15'' touchscreen control — €4,520 incl. ESA 675 W 3D 21'' touchscreen control (Windows base) — €6,485 DELEM 66 T 2D 17'' touchscreen control (Windows base) — €10,165 DELEM 69 T 3D 17'' touchscreen control (Windows base) — €16,350 KK-Industries GmbH There’s something for everyone!

Stanje: novo, Pressure: 135 Bending length: 3020 mm Frame width: 2555 mm Installation height: 550 mm Max. stroke length: 320 mm Throat depth: 450 mm Dimensions (LxWxH): 3745x2250x2835 mm Weight approx.: 9300 kg 4 axes (Y1, Y2, X, R): Yes, all axes controlled via Esa S630 (2D graphic controller) CNC crowning via controller: Yes, via Esa S630 (2D graphic controller) Motor power: 15 kW Technical Specifications XL 30135 Hodpfx Aljd Ehino Dju Unit Bending length: 3020 mm Bending force: 135 t Approach speed: 160 mm/s Bending speed: 10 mm/s Return speed: 130 mm/s Stroke: 320 mm Installation / clear height (E): 550 mm Throat depth (D): 450 mm Frame gap (B): 2555 mm Machine length (L): 3745 mm Machine width (W): 2280 mm Width without front stop (Y): 1720 mm Maximum height: 2835 mm Main motor: 15 kW Oil tank volume: 190 l Machine weight: 9600 kg The robust EUROPA XL press brake stands out for its high precision, accuracy, and versatile range of applications. EUROPA XL offers an exceptionally large installation height and, as a result, a generous cylinder stroke. Likewise, the throat depth is above average to ensure minimal restriction. We focus on quality, which is also reflected in the controller. As standard, our high-quality Esa S640 (2D graphic controller) is included. Furthermore, the KKI EUROPA XL press brake is equipped with CNC axes Y1, Y2, X, and R via the controller. Naturally, CNC crowning with the Esa S640 (2D graphic controller) is also included. We make no compromises on the top tool and die, equipping the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, a machine is only as good as its service, which is why we place a strong emphasis on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2, X, and R Esa S640 (2D graphic controller) Backgauge with double linear guide and ball screw spindle Motorized crowning device with CNC control 2 heavy-duty front support arms with height adjustment via handwheel; heavy-duty linear guide version from 175 tons upward Laser safety device on upper beam CE safety equipment Various options available Other controllers: ESA 640 2D 15'' touchscreen controller – €4,520 incl. ESA 675 W 3D 21'' touchscreen controller (Windows-based) – €6,485 DELEM 66 T 2D 17'' touchscreen controller (Windows-based) – €10,165 DELEM 69 T 3D 17'' touchscreen controller (Windows-based) – €16,350 KK-Industries GmbH Something for everyone!

Stanje: novo, Pressure: 220Bending length: 3020Frame gap: 2550Clear height: 600Stroke length (max.): 350Throat depth: 450Dimensions (LxWxH): 3745x2290x3055Approx. weight: 11,2504 axes (Y1, Y2, X, R): Yes, all axes controlled via Delem DA 66 (2D graphical control)CNC crowning via control: Yes, through the Delem DA 66 CNC controller (2D graphical control)Motor power: 22Technical specificationsXL 30220UnitBending length: 3020 mmBending force: 220 tLowering speed: 140 mm/sBending speed: 10 mm/sReturn speed: 130 mm/sStroke: 350 mmClear installation height / daylight (E): 600 mmThroat depth (D): 450 mmGap between frames (B): 2555 mmMachine length (L): 3745 mmMachine width (W): 2290 mmWidth without front stop (Y): 1720 mmMaximum height: 3055 mmMain motor: 22 kWOil tank capacity: 300 lMachine weight: 11,800 kg Model: KK Kletzer EUROPA XL The robust EUROPA XL press brake stands out thanks to its high precision, accuracy, and versatile application options. The EUROPA XL offers a very large clear height and, as a result, a long stroke (ram travel). The throat depth is also above average, providing maximum flexibility with minimal limitations. We focus on quality, reflected in the machine’s control system. As a standard controller, we use the high-quality Esa S640 (2D graphical control). Furthermore, the KKI Europa XL press brake is equipped with Y1, Y2, X, and R CNC axes via the controller. Naturally, CNC crowning is also integrated via the Esa S640 (2D graphical control). We make no compromises on the upper tooling and die either, equipping the KKI EUROPA XL CNC press brake with premium tools from EUROSTAMP Italy. Of course, every machine is only as good as its service support. For this reason, we put a strong emphasis on highly qualified personnel with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2, X, and R Hsdpfxod Edhlo Al Dju Esa S640 (2D graphical control) Backgauge with double linear guides and ball screw Motorized crowning system with CNC control Heavy-duty design, height adjustment via handwheel; from 175 t up, heavy version on linear guide Laser protection system on upper beam CE safety equipment Various options available Other controllers: ESA 640 2D 15" touchscreen control                                                        ¤ 4,520,-- incl. ESA 675 W 3D 21" touchscreen control (Windows based)                       ¤ 6,485,-- DELEM 66 T 2D 17" touchscreen control (Windows based)                    ¤ 10,165,-- DELEM 69 T 3D 17" touchscreen control (Windows based)                    ¤ 16,350,-- KK-Industries GmbH There is something for everyone!

Leto izdelave: 1975, stanje: rabljeno, Ponujamo rabljen stroj za pranje perila Milnor 600-0653 A CN, izdelan leta 1975. Razdeljen na dve strani, vsaka s kapaciteto 50 kg, možnost obojestranskega nalaganja in praznjenja. Proizvajalec: Milnor Model: 600-0653 A CN Hsdpfxez Egais Al Dsu Serijska številka: 25005374882 Leto izdelave: 1975 Maksimalna hitrost vrtenja: 625 vrt/min Maksimalna kapaciteta: 165 kg Para (min): 2,0 bar Para (maks): 7,8 bar Voda (min): 0,3 bar Voda (maks): 5,0 bar Zrak (min): 5,8 bar Zrak (maks): 7,5 bar Nominalni tok: 25,3 A Nominalna napetost: 380 V Število faz: 3 ~ Če imate dodatna vprašanja ali potrebujete več informacij, nam lahko pošljete sporočilo ali nas pokličete.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, lastna masa: 8.400 kg, Z oddajo ponudbe se zavezujete k pravočasnemu prevzemu v 1. ali 2. tednu 2026! Stružnica s portalnim nakladanjem! Hedpfx Ajxzubpel Dsu PODROBNOSTI O STROJU Teža: 8.400 kg

Stanje: novo, Leto izdelave: 2025, Ref. No.: 10461 Manufacturer: IGREK Type: DT 4000 Hedpfexmd Sujx Al Deu Year of manufacture: 2025 Control type: CNC control Control system: SIEMENS SINUMERIK 840D SL Location: Istanbul Country of origin: Türkiye Spindle speeds: 4,000 rpm Turning height: 2,000 mm Table diameter: 4,000 mm Spindle power: 37 kW Max. table load: 40 t Table rotation speed (turning): 60 rpm Max. turning diameter: 5,000 mm Max. turning height above faceplate: 2,000 mm Max. spindle torque: 1,200 Nm Spindle taper: ISO 50 Machine length: 7,500 mm Machine width: 12,000 mm Machine height: 9,500 mm Approx. machine weight: 125 t Additional information: RAM slide stroke: 2,100 mm RAM cross-section: 350 x 350 mm Vertical travel of movable cross rail: 2,000 mm Table drive system: Segmented direct drive motors Table torque: 8,200 Nm – 14,400 Nm max. Table guidance system: Hydrostatic bearings and guides IGREK DT 4000 – Your Solution for Precision Heavy-Duty Machining The IGREK DT 4000 is a state-of-the-art CNC vertical turning lathe designed specifically for precision machining of large components. Equipped with a 4,000 mm hydrostatic rotary table and a movable cross rail, it enables efficient machining of workpieces with a maximum turning diameter of 5,000 mm and a turning height of up to 2,000 mm. Key Features: Hydrostatic Rotary Table: The 4,000 mm hydrostatic rotary table ensures maximum precision and smooth operation when machining heavy workpieces. Movable Cross Rail: The vertically adjustable cross rail with a 2,000 mm stroke offers flexibility and enables adaptation to different workpiece heights. Powerful Spindle: With a spindle speed of up to 4,000 rpm and a power output of 37 kW, the machine is designed for demanding metal-cutting applications. High Load Capacity: The rotary table accommodates workpieces weighing up to 40 tons, making it ideal for large and heavy components. Multifunctional Machining: Thanks to the live spindle and precise C-axis positioning, milling and drilling operations are possible in addition to turning, increasing the machine’s versatility. The IGREK DT 4000 combines advanced technology with high performance and flexibility to meet the requirements of modern manufacturing processes. With its robust construction and wide range of machining capabilities, it is the ideal solution for the precise machining of large components in various industries.