Taf Lahka Valjčna Proga, Dolžina: 1.450 Mm nakup rabljenega (81.697)

Stanje: novo, Dolžina pločevine: 2560 Debelina pločevine: 2,5 Standardna oprema: NC-krmiljenje Programirno motorizirano zadnje vodilo s hodom 750 mm Osvetlitev sence rezalne črte Lhsdpfxogiclae Al Nsf 1 kos vpenjalne roke z merilno lestvico 2 kosa podpornih roke za pločevino 1 kos dodatne podporne roke (za modele 1106-1306-1505) Zaščita za prste Kroglična miza (Ball Transfer Table) Enostavna nastavitev reže od spredaj Kroglični vreteno Števec rezov Prenosno nožno stikalo z gumbom za zaustavitev v sili Svetlobna pregrada na zadnjih varovalih

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 6.0 mm Cutting width: 3,200 mm Total power requirement: 7.5 kW Approximate weight: 6,250 kg Dimensions (LxWxH): 4,180 x 2,150 x 2,000 mm Technical Data: Lodpfx Aleh Talzo Nehf Sheet thickness: 6 mm Cut length: 3,200 mm Cutting angle: 1.30° Backgauge: motorised, 1,000 mm Motor power: 7.5 kW Length: 4,000 mm Width: 1,700 mm Height: 1,800 mm Weight: 6,250 kg Equipment: Swing beam design NC preselection control ELGO P 40 T with backgauge and cutting gap adjustment from the front via the control panel motorised backgauge up to 1,000 mm clear control panel mounted on a swing arm hydraulic hold-downs arranged close to the cutting edge foot switch cutting gap adjustment cutting line illumination wide support table with ball inserts foldable finger guard 1,000 mm 1 T-slot side stop 2 sheet support arms with T-slot simple blade change and resharpening adjustable cutting length for economic processing lower blade with four cutting edges, reversible upper blade with two cutting edges, reversible qualified customer service Operating manual in ENGLISH Machine and equipment in compliance with CE regulations

Stanje: novo, Leto izdelave: 2025, Sheet thickness: 10 mm Sheet length: 3200 mm Combination Package: CNC Press Brake & Swing Beam Shear For precise, cost-effective, and safe sheet metal processing We offer you a high-performance, complete package consisting of a CNC press brake (160 t / 3200 mm) and a swing beam shear (10 mm / 3200 mm) – optimally matched for modern sheet metalworking with high precision and efficiency. CNC Press Brake – 160 tons / 3,200 mm With 4 CNC axes (Y1, Y2, X, R) & CNC crowning system Standard features: - Robust, torsion-resistant construction for precise bending and long service life - CNC axes: Y1, Y2, X, and R – for accurate positioning and repeatability - Motorized CNC crowning system for automatic bending angle correction - CNC control ZY 68 (comparable to Delem) – intuitive, powerful, and flexible - Backgauge with linear guides & ball screw, 4 gauging fingers - 2 sheet support arms for ergonomic operation - Laser safety device on the upper beam for high operator safety - Quick clamping system for top tools - Tooling system: Promecam Amada (segmented and gooseneck) - Die system compatible with Promecam & Amada - Complete CE safety equipment Swing Beam Shear SWC 3200 x 10 mm With NC control and motorized backgauge Technical data: - Sheet thickness: up to 10 mm, cutting length: 3,200 mm - Cutting angle: 1.30°, Motor power: 15 kW - Motorized backgauge: up to 1,000 mm - Dimensions: L 3,800 × W 1,820 × H 1,920 mm - Weight: 7,700 kg Features - Swing beam design for clean cuts - NC control ELGO P40 T with front-side operation (incl. blade gap adjustment) - Hydraulic hold-downs close to the cutting line - Clear control console on swing arm - Foot switch, blade gap adjustment & cutting line illumination - Wide support table with ball transfers, 2 sheet support arms with T-slot - Folding finger guard, 1 side gauge with T-slot - Upper blade double-edged / lower blade four-edged, reversible - Adjustable cutting length for time-saving operation - Qualified customer service, English operating manual Lodpfxjwnz Aps Al Nehf - CE-compliant design Your advantage – Everything from a single source: - Perfectly coordinated machines - Time and cost savings with the combination offer - Ideal for workshops, metal fabricators & job shops Enquire now and secure a non-binding quotation!

Stanje: novo, Sheet length: 1100 mm Sheet thickness: 6 mm Motor: 7.5 kW Width: 2250 mm Length: 1750 mm Height: 1400 mm Standard equipment: - NC control - Programmable motorized backgauge with 750 mm travel - Shadow line lighting - 1 piece angle stop with scale Lhsdpfxogh Ndms Al Nef - 2 sheet support arms - 1 sheet support arm (for models 1106, 1306, 1505) - Finger guard - Ball transfer table - Knife angle easily adjustable from the front - Ball screw spindle - Stroke counter - Portable foot pedal with emergency stop button - Light barrier on the rear guards

Stanje: novo, Sheet length: 1560 mm Sheet thickness: 5 mm Dimensions (LxWxH): 2250 x 2250 x 1400 mm Standard equipment: - NC control unit - Programmable motorized backgauge with 750 mm travel - Shadow line lighting - 1 piece angle gauge with scale - 2 sheet support arms - 1 sheet support arm (for models 1106, 1306, 1505) Lhedpogick Iefx Al Nsf - Finger guard - Ball transfer table - Blade angle easily adjustable from the front - Ball screw spindle - Cut counter - Portable foot pedal with emergency stop button - Light barrier on the rear safety guard

Stanje: novo, Blechlänge: 2060 Blechstärke: 3 Standardzubehör NC-Steuerung Programmierbarer, motorisierter Rückanschlag mit 750 mm Hub Schattenlinienbeleuchtung 1 Stück Anschlagschiene mit Skala 2 Stück Materialstützarme 1 Stück Materialstützarm (bei den Modellen 1103, 1303, 1503) Ledogick Sjpfx Al Nshf Fingerschutz Schneidlinienbeleuchtung Kugelgewindetrieb Schnittzähler Tragbares Fußpedal mit Not-Aus-Schalter Lichtschranke an den hinteren Schutzvorrichtungen Optionen 0–180° verstellbarer Winkelanschlag: 910 EURO Pneumatisches Blechstützsystem (hinten): 3.200 EURO Lichtschranke hinten (Sicherheit): 1.620 EURO Elgo P40T Touchscreen-Steuerung: 1.960 EURO Klinge für Edelstahl (statt Standard): 1.000 EURO Ersatzklingen (Ober- und Untermesser, 1 Satz): 2.350 EURO

Stanje: pripravljen za uporabo (rabljen), Höfler machine control panel 393 x 146 mm, used, normal signs of wear, 100% fully functional, scope of delivery as per photos. Lhsdpfx Alji Ea Nqs Nef

Stanje: novo, Leto izdelave: 2026, Delivery every Monday and Tuesday – RELIABLE! Versatile manual sheet metal guillotine shear in heavy-duty design for workshops and industry. With the manual GLT guillotine shear, you’ll achieve a perfect cut on every job. - Extension table makes it easier to handle large sheet metal panels on the table - Support table with measurement scale - Sturdy and compact steel construction - High-quality, long-lasting steel blades - Extremely stable and heavy-duty cast iron frame - Ground and hardened shear blades - Backgauge system with scale - CE marking - Declaration of conformity - Robust and stable construction - For steel sheets up to 1.2mm thickness - Working length: 2050mm - Open frame design suitable for continuous cuts - Large cast work table Lower storage shelf for offcuts available at extra charge Dimensions: Length: 2500mm Width: 750mm Height: 1150mm Weight: approx. 500 kg Throat depth: 8cm Delivery costs: 330 EUR Price: 4650 EUR Scribing template included free! Delivery time: weekly Cash payment upon delivery Lodpfscl D Hlox Al Njhf Contact via WhatsApp We look forward to hearing from you! We issue invoices with 0% VAT (intra-community delivery) as well as with 19% VAT.

Stanje: novo, Leto izdelave: 2025, Hydraulic Guillotine Shear from Prod-Masz – achieve perfect cuts on every job! High productivity, precise workmanship, and long-lasting operation! The pull-out support table makes it easier to guide large-format metal sheets. Support table with integrated measuring scale. Robust and compact steel construction. High-quality, durable steel blades. Exceptionally stable and heavy cast iron design. Precision ground and hardened shear blades. Rear gauge system with scale. CE-certified quality. Declaration of conformity included. Suitable for steel sheets up to 1.2 mm thick. Open frame design allows for continuous cutting. Max. working width: 2050 mm Motor power: 2.2 kW Hydraulic oil: HL 46 Cutting force: 4 t Operating pressure: 120-150 bar Equipped with hydraulic balancers from the cutter bar upwards. Dimensions: Length: 2500 mm / Width: 750 mm / Height: 1150 mm Ljdpfxjhuiv Ts Al Nehf Weight: approx. 600 kg Cash payment upon delivery! Weekly delivery Shipping: 300 euros nationwide within Germany We look forward to your inquiry! Invoices are issued either at 0% VAT as intra-community delivery or plus 19% German VAT.

Stanje: novo, Leto izdelave: 2026, Delivery every Monday and Tuesday – RELIABLE! The robust construction provides the ideal conditions for precise cutting of sheet metal up to 1.2 mm thickness. Universal manual sheet metal guillotine shear in a heavy-duty design, suitable for both trade and industry. With the manual GLT guillotine shear, you achieve a perfect cut every time. - The extendable table facilitates handling of large-format metal sheets on the work surface - Support table with integrated measuring scale - Sturdy and compact steel construction - High-quality, durable steel blades - Extremely stable and heavy-duty cast iron frame - Ground and hardened shear blades - Rear gauge system with scale - CE-certified quality Ljdscudlajpfx Al Njhf - Declaration of conformity - Durable and robust design - For steel sheets up to 1.2 mm - Open-frame design for endless cutting - Large cast worktable - Working length: 2050 mm Dimensions: Length: 2500 mm Width: 750 mm Height: 1150 mm Weight: approx. 500 kg Delivery costs: €330 Price: €4,650 SCRIBING TEMPLATE FREE OF CHARGE! Delivery date: Every Monday/Tuesday Cash payment upon delivery We look forward to your inquiry! We issue invoices with 0% VAT for intra-community delivery as well as with 19% VAT.

Stanje: novo, Leto izdelave: 2026, Punctual delivery, trustworthy equipment! With the aid of CNC technology, we are able to expand our product range and manufacture with much greater precision. This is demonstrated by our new product line: Manual guillotine, lever shear, plate shear GLT/R 3050\1.2: - Cutting blades: thermally treated tool steel NC10 - All base frame components: steel profiles 18G2A - Manual operation using a cam mechanism. The guillotine has been manufactured using CNC technology, which ensures precise cutting, high productivity, and years of reliable, trouble-free operation. Max. working width: 3050 mm For steel sheets: up to 1.2 mm Dimensions: L: 3500, W: 1500, H: 1000 mm Weight: approx. 600 kg Max. cutting thickness: 1.2 mm (steel) Cutting blades: NC10 Rear gauge system with scale Open design for continuous cuts Large cast working table Ljdpfxjhuiv Es Al Nshf CE-certified quality Certificate of conformity Delivery: 300 euros Cash payment upon delivery Delivery schedule: weekly We look forward to your inquiry! Invoices are issued with 0% VAT as intra-community delivery or plus 19% VAT as applicable.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Lhjdpfx Ajmhhypjl Nef Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing Lodpfxomhh Dhj Al Nehf - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg Lodpfx Alomhh Dzj Nshf - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) Ledpemhhx Isfx Al Nshf - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg Ledpfxomhhyaj Al Nshf - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg Lsdoh Ek Dajpfx Al Njhf - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times Lhsdpfx Asmhh Ansl Nsf - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Scope of delivery: - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with usable depth of 1,200 mm - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg - Includes longitudinal and diagonal braces for 1,300 mm upright spacing - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Lhsdpfxomidyfe Al Njf Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard Ljdpfx Aemkixwjl Njhf - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) Ledpemhhf Sofx Al Njhf - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section: 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Lhodpomhhl Hjfx Al Nof Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg Lhedpfx Aljmhh Dts Nof - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: rabljeno, Različni konzolni regali Lhodpfeyrq Nlsx Al Nof 7x regal: Dimenzije: 6.125 x 2.400 x 3.000 mm Teža pribl.: 8.000 kg 3x regal: Dimenzije: 5.650 x 2.400 x 3.000 mm Teža pribl.: 7.380 kg Na voljo so statični izračuni !! Slika 1 prikazuje regal v sestavljenem stanju !!

Stanje: zelo dobro (rabljeno), Professional height gauge from the renowned Japanese brand Mitutoyo. The device is designed for precise height measurements and scribing on surface plates. Model with a measuring range up to 600 mm, equipped with a dial indicator and precise micrometric adjustment, providing highly accurate dimension control. The robust construction and high manufacturing quality typical of Mitutoyo ensure repeatable and reliable measurements. — Technical data: • Manufacturer: Mitutoyo (Japan) • Measuring range: 600 mm • Mitutoyo dial indicator • Indicator graduation: 2.5 µm • Micrometric fine adjustment • Stable, heavy base • Clear measurement scale — Applications: • Height measurement of workpieces • Scribing on granite surface plates • Dimensional inspection Lsdpfx Asy Dirqol Nshf • Workshops, toolrooms, quality control departments — Condition: Used, in good technical condition. Shows normal signs of use. Sold exactly as shown in the photos. — Equipment: • Mitutoyo height gauge • Dial indicator • Micrometric adjustment mechanism