Safandarley E-Brake 200-4100 nakup rabljenega (84.409)

Stanje: novo, Leto izdelave: 2025, Our SAPI pressure blasting unit type "Mammut" with a 200-liter vessel capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the permanently installed pressure regulator. The blasting unit is also equipped with a permanently mounted water separator, which removes moisture from the compressed air and prevents the blasting medium from clumping due to excessive moisture. For safe operation of the sandblasting equipment, our safety shutoff is included. This starts and stops the blasting process by actuating the hand lever, which is mounted on the blasting hose. The scope of delivery includes: - SAPI pressure blasting unit "Mammut 200 L" - 1 1/4" pressure regulator, permanently installed - 1 1/4" water separator, permanently installed - SAPI safety shutoff Technical data pressure blasting unit: - Precisely adjustable from 0.1 – 12 bar - TÜV-certified with certificate - Fixed piping 1 1/4" inside and outside - Rubber-coated metal cone with rubber seal - Generously sized handhole Isdpfx Afjwc Rk Eekebb - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 200 l - Total height: 1,420 mm - Vessel diameter: 600 mm - Overall diameter: 1,000 mm - Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with Safety Shutoff - Fastest switching times while complying with trade association regulations (VBG 48) - Pressure settings can be precisely adjusted before blasting – continuously adjustable from 0.1 – 12.0 bar - Reduced blasting media consumption, as the pressure vessel remains constantly pressurized with no unnecessary run-on - Upon restarting, full blasting pressure is instantly available at the nozzle – no pressure build-up required → lower consumption & less hose wear - No condensate forms in the vessel, as it remains pressurized at all times → no venting or aeration at each start/stop - Optimal media dosing with hardened fine-dosing valve - Lower compressed air requirement → noticeably reduced diesel consumption - Single-person operation possible, as the pressure can be read and adjusted directly at the manometer – even without starting - No failure-prone components such as control valves, membranes, or seals → maintenance-friendly and reliable in operation - Only the blasting hose in the safety shutoff needs to be checked and replaced if necessary

Stanje: dober (rabljeno), Ponujam industrijsko vertikalno črpalko priznanega nemškega proizvajalca ALLWEILER GmbH – model NLT 50-200. Črpalka je namenjena za neprekinjeno obratovanje v industrijskih, vodnih in tehnoloških sistemih. Oprema je popolna z električnim motorjem. Rabljeno stanje – vidni sledovi skladiščenja in rahla površinska korozija. ⚙️ Tehnični podatki proizvajalec: ALLWEILER (Nemčija) tip: NLT 50-200 leto izdelave: 2014 zmogljivost: 75 m³/h črpalna višina: 48 m število vrtljajev: 2900 obr/min moč motorja: 11,6 kW napajanje: 400V (50 Hz) 460V (60 Hz) Iedpfeyxtfwex Afksbb premer priključka: pribl. 65 mm izvedba: vertikalna (vertical inline pump) ✅ Tehnično stanje črpalka kompletna z motorjem ni vidnih mehanskih poškodb prosto se vrti vizualno stanje kot na slikah (sledovi skladiščenja, površinska rja)

Stanje: rabljeno, Leto izdelave: 1985, skupna dolžina: 1.800 mm, skupna širina: 110 mm, skupna višina: 1.700 mm, Barva: Siva Lastna teža: 1.000 kg - Letnik: 1985 - Dokumentacija na voljo: Ne Iodpfx Aezrxgwefksbb - Certifikat CE: Ne - Serijska številka: 315.928 - Nadzor: Konvencionalen - Največja višina [mm]: 750 - Premer vrtanja [mm]: 1500 - Razdalja med konicami [mm]: 600 - Transportne mere: 1800 mm x 110 mm x 1700 mm (d x š x v) - Transportna teža [kg]: 1000 kg - Transportni paketi [kos]: 1 Finančne informacije Davek na dodano vrednost: Navedena cena je brez davka na dodano vrednost. Davek na dodano vrednost/obdavčitev razlike: Za podjetja je davek na dodano vrednost odbitljiv. Dobava in odkup so možni kadar koli za vse iz industrijskega sektorja. Lukas van Rossum

Leto izdelave: 2020, stanje: novo, Krauss Maffei touch panel, latest version for MC5/MC6, spare parts Width: 37 cm Height: 47 cm Ibedpfsqvuicsx Afkjb Depth: 8 cm

Stanje: rabljeno, Double-shaft paddle mixer Mixer capacity: 1,250 L 200 mm head with material trolley entirely stainless steel Mixer dimensions (L x W x H): approx. 2,350 x 2,000 x 2,600 mm Loading height: 2,200 mm pneumatic lid Ijdpozxdrrofx Afkebb

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1990, Bobnasta sekljalnica / Sekljalni stroj / Drobilnik lesa temeljito obnovljen (obnovljen v delavnici) Proizvajalec: Rudnick & Enners Letnik: 1990 sestavljen iz: Bobnasta sekljalnica Rudnick & Enners, tip TH-200/650/3 obnovljena v delavnici (temeljito obnovljena) Ibodpfxozq Sqgs Afksb z novimi ležaji (nižnimi valjčnimi ležaji) in preverjenim rotorjem noži in proti-noži so novi Širina/višina dovodnega odprtine: 650 x 200 mm Premer rotorja: 600 mm Premer lukenj sita: 50 x 50 mm Moč pogona: 75,0 kW Pogon za dovod: 2 x 3,0 kW Teža: približno 3.500 kg Barva stroja: RAL 6011, zelenkasta brez električne instalacije in brez omarice za nadzor

Leto izdelave: 2023, stanje: novo, IMMEDIATE AVAILABILITY! Vibratory Finishing Machines with Separator Isdpfx Aon Smbrjfkebb The VKUE series machines are suitable for surface processing of metallic and non-metallic workpieces. These machines feature a large screening area, enabling easy separation of workpieces from the abrasive media. Optional Accessories - Pneumatic sound cover - Pneumatic flap control - Frequency control - Dosing pump - Magnetic valve - Basic control panel - Rinsing tube (various types available) The images are for reference only. Optional accessories are available at an additional cost.

Leto izdelave: 2017, stanje: novo, Größe: 040-200 Laufraddurchmesser: 190 mm Durchflussmenge (Q): 32 m³/h Förderhöhe (H): 51,00 m Ijdpfeh I D Dyox Afkebb

Stanje: rabljeno, prevoženi kilometri: 2.511 km, vrsta prenosa: drugo, vrsta goriva: električni, barva: rdeča, prva registracija: 08/2016, emisijski razred: noben, vzmetenje: drugo, Leto izdelave: 2016, obratovalne ure: 2.511 h, voznikova kabina: drugo, gorivo: elektrika, Naprodaj je viličar BT LPE 200/8 v rdeči barvi, prvič registriran avgusta 2016. Z 2.540 km prevoženih kilometrov je vozilo v zelo dobrem in urejenem stanju ter takoj pripravljeno za uporabo. BT LPE 200/8 prepriča s svojo zanesljivo tehnologijo in enostavnim upravljanjem – idealen za skladišča, industrijo ali logistična podjetja. Ibedpjzvhynsfx Afkeb Prodaja samo podjetjem (kmetijstvo, samozaposleni, mala in velika podjetja) ali za izvoz. Pridržujemo si pravico do spremembe cene in napake.

Stanje: zelo dobro (rabljeno), Vollrath EFC 200 Ball Mill Wet and dry grinding Iodok D Dwtopfx Afkobb Iron-free grinding with steatite balls Lining: hard porcelain Volume: 200 l Drive power: 1.4 kW Speed: 42 rpm Each unit consists of 3 ball mills mounted on a steel frame Very good, ready-to-use condition, straight from production!

Stanje: rabljeno, prevoženi kilometri: 3.547 km, vrsta prenosa: drugo, vrsta goriva: električni, barva: rdeča, prva registracija: 08/2016, emisijski razred: noben, vzmetenje: drugo, Leto izdelave: 2016, obratovalne ure: 3.547 h, voznikova kabina: drugo, gorivo: elektrika, Na prodaj je viličar BT LPE 200/8, rdeče barve, prvič registriran avgusta 2016. Ibodpfx Ajzvhyhofkob Zaradi majhne delovne ure (le 1.728 km) je vozilo v zelo dobrem in dobro vzdrževanem stanju ter je takoj pripravljeno za uporabo. BT LPE 200/8 navdušuje s svojo zanesljivo tehnologijo in enostavno uporabo – idealen za skladišča, industrijska podjetja ali logistične storitve. Prodaja samo podjetjem (kmetijstvo, samozaposleni, mala in velika podjetja) ali za izvoz. Pridržana pravica do spremembe cen in prodaje.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, obratovalne ure: 1.242 h, nosilnost: 2.000 kg, dvižna višina: 2.150 mm, vrsta goriva: električni, tip droga: dupleks, gradbena višina: 1.750 mm, Proizvajalec + model: BT SWE 200 * EX * Pyroban 2G / Cona 1 Dvižni steber: 2W2150 ID: 24110.7680 Kategorija: Demo Dvižni steber: 2W2150 Znižana višina: 1750 mm Dvižna višina: 2150 mm Nosilnost: 2000 kg Leto: 2017 Delovne ure: 1242 ur Kapaciteta: NOVA * 24v / 255Ah * letnik 11/2024 Opcije: * EX * Atex - Pyroban !!!! Ibodpfxozv H Svo Afkob Sistem = Ex - Tec 2G Plinska skupina = IIB Tip = 2G (dovoljeno v CONI 1 in 2) Temperaturni razred = T3 FEM 2 nosilna plošča vilic - nastavljive vilice

Stanje: zelo dobro (rabljeno), moč: 150 kW (203,94 KM), vrsta goriva: dizel, barva: rumena, Leto izdelave: 2012, obratovalne ure: 4.237 h, Year of manufacture: 2012 Drive: Wheel Number of cylinders: 6 Unladen weight: 17,000 kg Working width: 427 cm Technical condition: very good Isdpew Hqb Sofx Afkobb Visual condition: very good NEW HOLLAND RG 200 B MOTOR GRADER + RIPPER, YEAR 2012, 4,237 OPERATING HOURS Drive: 6x4 Engine: 6-cylinder turbocharged diesel Net Power: 200 HP (150 kW) @ 2,200 RPM Operating weight: 16,000 kg (35,274 lbs) Blade length: 4.27 m (14 ft) Maximum blade lift above ground: 450 mm (17.7 in) Maximum blade drop below ground: 725 mm (28.5 in) Hydraulic flow: 130 L/min (34.3 GPM) Transmission: Full powershift, 6 forward / 3 reverse gears Turning radius: 7.4 m (24 ft 3 in) Travel speed (forward/reverse): 45 km/h (28 mph) / 30 km/h (19 mph) Follow us on Instagram, Facebook, and TikTok for videos of our trucks and machines for sale. Wir sprechen Deutsch. We speak English. Hablamos Español.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 12 meseci, The all-rounder combines outstanding workmanship with a wide range of applications. Our machine also offers intuitive operation, optimizing your packaging processes. A high-quality material unwinder with dual automatic roll centering ensures precise material guidance. Furthermore, our active film advance system guarantees optimal web tension for flawless packaging results. The highly efficient brushless motors and the user-friendly color touchscreen control system provide maximum flexibility when changing formats, significantly simplifying your packaging operations. The machine features memory storage for machine parameter settings, allowing up to 50 different products to be stored. For this packaging line, we also offer fully and semi-automatic infeed systems, which can be retrofitted upon request. The machine is available with both left- and right-hand operation, and features a rotary end-sealing unit with electronic overload protection switch for maximum safety. Thanks to its high performance, versatility, and advanced technology, our machine is ideal for packaging food products such as brioches, cakes, candies, chocolates, as well as pharmaceuticals and a variety of gift items. Isdpewld Upjfx Afkjbb If you wish to optimize your packaging processes with strong production capacity and premium quality, Impuls Packaging is your ideal partner. Machine Features 1. Chain conveyor belt, 2.6 meters length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering system 4. Rotary end seal, single sealing jaw 5. Robust center fin seal structure 6. Four servo-driven controls - Active film advance roller - Center sealing - End sealing - Conveyor belt 7. HMI control panel 8. Three independent temperature controllers 9. Stainless steel 304 housing 10. Documentation in local language 11. Print mark control 12. Programmable bag length or fully automatic product length detection 13. Standard operating direction: left to right Technical Specifications 1. Product length: L120–500 mm 2. Product width: W30-200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 100 products/min (depending on product, bag length, and material) 5. Maximum film width: 600 mm 6. Power supply: 1Ph. 220V 50Hz 7. Overall power: approx. 4.8 kW 8. Machine weight: approx. 550 kg 9. Machine dimensions: approx. 4280 x 1200 x 1230 mm

Stanje: zelo dobro (rabljeno), RETSCH ZM 200 ultra-centrifugalni mlin s podajalnikom DR 100 Proizvajalec: RETSCH GmbH Tip: ZM 200 Vrsta stroja: ultra-centrifugalni mlin / mlin za fino mletje Dodatna oprema: RETSCH DR 100 podajalnik Na prodaj je rabljen RETSCH ZM 200 ultra-centrifugalni mlin s podajalnikom RETSCH DR 100 in obsežno dodatno opremo. ZM 200 je zasnovan za fino mletje vzorčnih materialov in se prodaja skupaj s prikazanim podajalnikom DR 100, različnimi siti, rotorji, komponentami za zbiranje in dovajanje ter dodatno opremo. Tehnični podatki: Proizvajalec: RETSCH GmbH Model: ZM 200 Vrsta naprave: ultra-centrifugalni mlin Napajanje: 1~ 200–240 V / 50–60 Hz Moč po tipski ploščici: 1.100 W Poraba toka: 12 A Upravljanje: digitalni upravljalni in prikazovalni panel Vmesniki: RS232 / RS485 Priključek za podajalnik DR 100 CE oznaka Podajalnik: Proizvajalec: RETSCH GmbH Tip: DR 100 Vrsta naprave: podajalnik / vibracijski podajalnik Digitalni upravljalni in prikazovalni panel Upravljanje z gumbom za vklop/izklop Dozirni lij in dozirni žleb, kot je prikazano na slikah Dimenzije: ZM 200 (D × Š × V): 515 × 410 × 365 mm Oprema: RETSCH DR 100 podajalnik Dozirni lij Dozirni žleb Rotor / orodje za mletje, kot je prikazano na slikah Različna obročna sita / vložki sit Zbirna posoda Komponente za doziranje in zbiranje Filtrirne vrečke Različni rezervni deli in dodatna oprema RETSCH Navodila za uporabo ZM 200 Navodila za uporabo DR 100 Dodatna oprema, kot je prikazano na slikah Transportni podatki: Dimenzije ZM 200 (D × Š × V): 515 × 410 × 365 mm Ibedpfxozxqhys Afkob Teža: ni navedena / ni ugotovljena Transport oz. pošiljanje po dogovoru Stanje: Rabljeno / Used Naprava je prikazana v vklopljenem stanju. Prikazovalnik in upravljalni panel sta aktivni. Vizualno stanje, kot je prikazano na slikah. Prisotne so sledi uporabe. Obseg dobave: 1 × RETSCH ZM 200 ultra-centrifugalni mlin 1 × RETSCH DR 100 podajalnik Dozirni lij in dozirni žleb Rotor / orodje za mletje, kot je prikazano na slikah Različna obročna sita / vložki sit Zbirna posoda in komponente za doziranje Filtrirne vrečke Navodila za uporabo ZM 200 Navodila za uporabo DR 100 Obsežna dodatna oprema, kot je prikazano na slikah Razpoložljivost: po dogovoru. Obseg dobave, kot je prikazano na slikah. Pridržujemo si pravico do sprememb, napak in medvmesne prodaje.

Leto izdelave: 1991, stanje: rabljeno, Wheel diameter - max. 0 mm Number of teeth - max. 0 Module - max. Module - min. Total power requirement kW Machine weight approx. t Space requirement approx. m CNC-controlled synchronizer ring milling machine Iedpfx Afst Hwv Hskobb ideal for synchronizer rings, BWO control 785 H

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 250 kg, Leto izdelave: 1995, Kinshofer Greiftechnik 605-200/nakladalni žerjav • Proizvajalec: Kinshofer Greiftechnik GmbH • Tip: 605-200 večnamenski ali školjkast prijemalec • Leto izdelave: 1995 • Hidravlični prijemalec za nakladalni žerjav Ibodpoy Taqiefx Afkeb • Uporablja se za prijemanje in premikanje materialov • Področja uporabe: odpadna kovina; hlodi; kamenje; rušilni material; reciklirni material • Nosilnost: 3000 kg • Teža: 250 kg • Nemški stroj • Takoj pripravljen za uporabo • Ta ponudba ni zavezujoča in je predmet sprememb. - Pridržano predhodno prodajo, - Ne izključujemo napak ali tiskarskih napak. - Prodaja po naših splošnih pogojih.

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 4.657 h, Oprema: pogon na vsa štiri kolesa, * zaprta kabina * izklop ob preobremenitvi * kamera za vzvratno vožnjo * klimatska naprava * avtoradio s CD-predvajalnikom ----Številka vozila 12423 Iedpfx Afjzxaxbskebb ----Pridržana pravica do sprememb in napak.

Stanje: rabljeno, največja dovoljena obremenitev: 29.700 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2007, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Prikolica za les Schwarzmüller 3-osna O4 - Polprikolica Tip - Različica/Verzija: HS 3/E Fin VAVSAH3387H250852 12 štrcljev Lastna teža: 5.300 kg Nosilnost: 29.700 kg Dovoljena skupna masa: 35.000 kg Tehnično dovoljena skupna masa: 38.000 kg Obremenitev na sedlo: 11.000 kg 1. os: 8.000 kg 2. os: 8.000 kg 3. os: 8.000 kg Velikost pnevmatik: 385/65 R22.5 160J Prva registracija: 19.07.2007 Neto cena Isdpjxdqrcefx Afkjbb Vse informacije brez garancije Tel./WhatsApp:

Stanje: novo, Leto izdelave: 2022, 57 linear meters of wide-span shelving, 60 cm deep, workshop shelving, warehouse shelving, large compartment shelving, manual storage, shelving units, small parts storage, Specifications: - Height: approx. 200 cm - Depth: approx. 60 cm - Length: approx. 57 linear meters Shelving package includes: - 031 x frames approx. 200 x 60 cm, dismantled - 240 x beams approx. 185 cm - 120 x shelf panels approx. 184.5 x 59.5 cm - Including safety pins - Model: BLT, Type WR20/60 - Load capacity: 400 kg per compartment, with evenly distributed load - Levels: 4 storage levels - Chipboard shelves, natural finish - Uprights blue - New stock, available ex warehouse - Other quantities available! Pre-assembly of frames can be provided by us for a small additional charge of €6.00/net per piece. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €5,885.00 net plus applicable VAT You will receive an invoice with stated VAT. Ibsdpszy Up Rsfx Afksb Transport: Delivery can be arranged by our partner forwarding company upon request. Costs depend on postal code. Assembly: Our trained staff will be happy to assist with the professional assembly and disassembly of your equipment if required. Our recommendation: Let us know your requirements… We are happy to support you with your projects—from planning and ordering to assembly.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 12 meseci, The all-rounder combines outstanding workmanship with a wide range of applications. Our machine also features intuitive operation that optimises your packaging processes. A high-quality material unwinder with dual automatic roll centering ensures precise material guidance. In addition, our active material feed device guarantees optimal web tension for flawless packaging results. The extremely powerful brushless motors and the user-friendly colour touchscreen control system give you maximum flexibility during format changes and greatly simplify your packaging operations. The machine is equipped with memory slots for saving machine parameter settings for up to 50 different products. For this packaging line, we also offer fully and semi-automatic feeding solutions, which can be retrofitted as required. The machine is available in both running directions and features a rotary cross-sealing unit with electronic overload protection for maximum safety. Thanks to its performance, versatility, and technological advancement, our machine is ideal for packaging food items such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift articles. If you want to optimise your packaging processes with strong production capacity and high quality, we at Impuls Packaging are your ideal partner. System Features 1. Chain conveyor belt, 2.6 metres in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotary end-sealing unit, single sealing jaw 5. Robust, central fin seal structure 6. Four servo-driven control drives - Active material feed shaft - Middle seal - End seal - Conveyor belt 7. HMI operating panel Ibodpfx Afowld Tfjkeb 8. Three individual temperature controllers 9. Housing made of 304 stainless steel 10. Documentation in the national language 11. Print mark control 12. Bag length programmable or with fully automatic product length detection 13. Standard running direction: left to right Technical Parameters 1. Product length: L40–600 mm 2. Product width: W30–200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 80 products/min 5. Maximum film width: 600 mm 6. Voltage supply: 1Ph. 220V 50Hz 7. Total power: approx. 4.7 kW 8. Machine weight: approx. 550 kg 9. Machine dimensions: approx. 4300 x 1190 x 1210 mm

Stanje: novo, Leto izdelave: 2022, 57 running meters of wide-span racking, 80 cm deep, workshop racks, storage racks, large compartment shelving, manual storage, shelving systems, small parts storage. Specifications: - Height: approx. 200 cm - Depth: approx. 80 cm - Length: approx. 57 running meters Rack package includes: - 031 x frames approx. 200 x 80 cm, disassembled - 180 x beams approx. 185 cm - 090 x shelf boards approx. 184.5 x 79.5 cm - 180 x support bars / load distributors - Including safety pins - Model: BLT, Type WR20/80 Ibodszy Uqnspfx Afksb - Load capacity: 400 kg per compartment (evenly distributed load) - Levels: 3 storage levels - Chipboard shelves, natural finish - Blue uprights - Galvanised support bars - Brand new, ex-stock - Other quantities available on request! Pre-assembly of frames can be carried out by us for a small surcharge of €6 net per unit. -- AVAILABLE FOR IMMEDIATE DELIVERY IN MULTIPLE QUANTITIES -- Price: €5,737.00 net plus statutory VAT An invoice with VAT shown will be issued. Shipping: Delivery is available on request via our partner forwarding company; shipping costs depend on your postcode. Installation: Our trained staff is available to assist with the professional assembly and disassembly of your facility as needed. Our recommendation: Let us know your requirements… We are happy to support you with your project – from planning and ordering through to installation.

Stanje: novo, Leto izdelave: 2022, 57 running meters of wide-span racking, 80 cm deep, workshop racks, storage racks, large compartment shelving, manual storage, shelving systems, small parts storage. Specifications: - Height: approx. 200 cm - Depth: approx. 80 cm - Length: approx. 57 running meters Rack package includes: - 031 x frames approx. 200 x 80 cm, disassembled - 180 x beams approx. 185 cm - 090 x shelf boards approx. 184.5 x 79.5 cm - 180 x support bars / load distributors - Including safety pins - Model: BLT, Type WR20/80 - Load capacity: 400 kg per compartment (evenly distributed load) - Levels: 3 storage levels - Chipboard shelves, natural finish - Blue uprights - Galvanised support bars - Brand new, ex-stock - Other quantities available on request! Pre-assembly of frames can be carried out by us for a small surcharge of €6 net per unit. -- AVAILABLE FOR IMMEDIATE DELIVERY IN MULTIPLE QUANTITIES -- Price: €5,737.00 net plus statutory VAT Ibsdpfx Afozy Upwokob An invoice with VAT shown will be issued. Shipping: Delivery is available on request via our partner forwarding company; shipping costs depend on your postcode. Installation: Our trained staff is available to assist with the professional assembly and disassembly of your facility as needed. Our recommendation: Let us know your requirements… We are happy to support you with your project – from planning and ordering through to installation.

Stanje: novo, Leto izdelave: 2025, Weight: 340 kg Diameter: 960 mm Height: 980 mm Capacity: 219 l Isdpfjymf Raox Afkobb Vibratory finishing machines with separator The VKUE series machines can be used for surface finishing of metallic and non-metallic workpieces. These machines feature a large screening area, allowing for easy separation of workpieces from abrasive media. Optional accessories: - Pneumatic sound-dampening cover - Pneumatic flap control - Frequency control - Dosing pump - Magnetic valve - Basic control panel - Rinsing pipe (various types) Images are for reference only. Optional accessories are available at an additional cost.

Leto izdelave: 2020, stanje: kot nova (razstavni stroj), Demonstration tool: SDT 200 ASD (ATEX) Ultrasonic Multi-Function Detector Set. Includes: 1 x SDT 200 (ATEX) receiver with digital (numeric) display for static peak value detection, including rechargeable battery pack Monitoring indicators for reliable diagnostics during condition monitoring: RMS, PEAK, and Crest Factor, integrated data logger for 4000 measurements at 500 locations (grouped by sensor, date, and time) 1 x charger 1 x Peltor headphones 130 dB 1 x carrying strap 1 x directional probe (screw tip & rubber tip) 1 x plastic case with insert 1 x operating manual on USB stick 1 x USB cable for data transfer 1 x calibration certificate (dated 02/2020) 1 x flexible Atex sensor 550 mm with interchangeable sensor head 1 x spiral cable 1 x funnel directional probe for SDT200 1 x leakage tags, pack of 1000 (for marking compressed air leaks) Other leakage measuring devices available on request. Iedpfepyg Sasx Afkjbb Visit our showroom. We always have a wide selection of new and used compressors in stock!