Rawyler Avtomatski Odrezovalni Stroj Rawyler Awt-5 nakup rabljenega (80.742)

Stanje: dober (rabljeno), številka stroja/vozila: Blinie, BSTA 30 Strokes per minute: 600 spm Feed unit BBV 120/60 High-performance: 600 spm Press force: 30 tons Maximum strip width: 190 mm Additional high-speed presses in stock from Bruderer – models BSTA 18, 20, 30, 200, 50 – as well as presses from Schaal and Mabu. Tjdpodguhcefx Aqtjb

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 995, Avtomatski stroj za uravnavanje zob Vollmer tip AT za okvirne žage. Stroj je bil pred kratkim generalno obnovljen in deluje brezhibno. Tedpfx Aszc Hyzjqtjb

Stanje: rabljeno, Leto izdelave: 2000, Ideal machine for the production of rolling pins, turned round chair legs, and similar items. Tsdpfx Ajrmxr Asqteb

Stanje: pripravljen za uporabo (rabljen), Na voljo sta dva enaka polnilna stroja, zmogljivost 100 ml, 500 ml, 1000 ml: 17-18 kos/min, zmogljivost 5000 ml: 9-10 kos/min, transportni korak: 317,5 mm, z upravljalno ploščo, ločevalnikom pločevink, podajalnikom pokrovčkov, zapiralko pokrovčkov in dokumentacijo. Ogled na lokaciji je možen. Tjdpfezh Nh Djx Aqtsb

Stanje: rabljeno, številka stroja/vozila: 4131, Comm. No. Lg 34422 High-performance punching press BRUDERER BSTA 60 H From ongoing production. Stroke adjustment requires repair. Todpjinzdlefx Aqtsb Without soundproof enclosure and without strip feeding line. Feeder BBV 202/120

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Tsdpfxogwbbqj Aqtjb Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 150 152, skupna višina: 6.615 mm, nastavitev hidravličnega cilindra: 200 mm, vgradna višina: 800 mm, višina mize: 1.000 mm, skupna širina: 3.210 mm, skupna dolžina: 5.140 mm, dolžina mize: 3.000 mm, širina mize: 1.400 mm, stiskalna sila: 400 t, višina krmilne omare: 2.200 mm, dolžina elektro omare: 3.600 mm, širina krmilne omare: 600 mm, vrsta vhodnega toka: trifazni, razmak između stupova: 1.100 mm, razdalja med stranskimi nosilci: 1.100 mm, razdalja med stojali: 3.020 mm, skupna masa: 100.000 kg, leto zadnje generalne obnove: 2025, POZOR: Stroj je trenutno razstavljen. Komponente si lahko ogledate. Pred dostavo leta 2026/2027 bo stroj popolnoma mehansko in električno obnovljen. Sila stiskanja: 4000 kN Nastavljiva hod: 50 – 300 mm Nastavitev batnice: 200 mm Število hodov: 15 – 60/min Tjdpfxow H Ag Ts Aqteb Namestitvena višina orodja: 800 mm Dimenzije mize: 3000 x 1400 mm Dimenzije batnice: 3000 x 1200 mm Nova krmilna enota SIEMENS S7 1500 serija

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 9443, skupna višina: 3.160 mm, nastavitev hidravličnega cilindra: 64 mm, skupna širina: 1.300 mm, skupna dolžina: 2.470 mm, širina transportnega traku: 160 mm, stiskalna sila: 50 t, višina krmilne omare: 1.100 mm, dolžina elektro omare: 1.250 mm, širina krmilne omare: 400 mm, vrsta vhodnega toka: Klimatska naprava, nastavitev hoda: 1.651 mm, razmak između stupova: 250 mm, delovna širina: 950 mm, vhodna napetost: 380 V, skupna masa: 8.600 kg, krmilna napetost: 24 V, debelina transportnega traku: 4 mm, pritisk: 5 letvica, priključek za stisnjen zrak: 10 letvica, vhodna frekvenca: 50 Hz, prebijalna sila: 50 t, BRUDERER BSTA 50HL (500 kN, leto izdelave 1990, št. 9443) VISOKOZMOŽEN STROJ ZA SEKANJE 100–1000 udarcev na minuto Tehnični podatki Tjdpjzq Sdysfx Aqtob Proizvajalec stroja: BRUDERER AG, Frasnacht, Švica Model stroja: BSTA 50 HL Serijska/ševalna številka: št. 9443 Leto izdelave: 1990 Skupna teža približno: 8.700 kg Kabina za zmanjšanje hrupa: Š 3.460 × D 2.331 × V 3.910 mm (neobvezna dodatna oprema) Območje giba (nastavljivo): 16 / 19 / 25 / 32 / 38 / 44 / 51 mm Območje nastavitve bata: 64 mm Širina odpiranja orodja (maks.): 950 mm Nosilna plošča – širina × globina: 940 × 650 mm Odprtina osnovne plošče Š × G: 900 × 200 mm Višina podajanja traku (nastavljivo): 60–140 mm Maks. širina podajanja traku: 250 mm Naprava za podajanje: BBV 195 - 85 Kot podajanja: 90 stopinj Maks. debelina traku: 4 mm, širina traku: 160 mm Dolžina podajanja: 0–85 mm Napetost napajanja: 3 × 380 V / 50 Hz Moč glavnega motorja: 28 kW Nadzorna napetost (DC): 24 V DC Pnevmatično napajanje: 6–10 bar (priključek R ½") Širina stroja za sekanje (s podajanjem): približno 2.471 mm Globina stroja za sekanje: približno 1.302 mm Višina stroja za sekanje: približno 3.165 mm Cena vključuje transport po Evropi Originalna tehnična dokumentacija in električna shema Neobvezno: kabina/ojačana konstrukcija za zmanjšanje hrupa

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), A fully automatic Kasto band saw system is available. Cutting range at 90°: Round material: 530mm, Square material: 530mm x 530mm, Flat material: 530mm x 640mm. Saw blade length: 7675mm, saw blade width: 54mm, saw blade thickness: 1.6mm, cutting speed: 120m/min. Overall system dimensions (X/Y): approx. 18,000mm x 4,000mm. Weight: approx. 6,000kg. Includes roller conveyors. Documentation is available. On-site inspection is possible. Tsdev S E Edepfx Aqtob

Stanje: rabljeno, Leto izdelave: 1991, Funkcionalnost: nepreverjeno, stiskalna sila: 20 t, hod: 51 mm, skupna masa: 3.600 kg, Stiskalni avtomat BSTA 200E, letnik 1991/2000, obnovljen. Podajalnik BBV 101/75 desno. Nastavljiv hod 8 do 51 mm. Nazivna pritiskalna sila 20 t. Največja širina vgradnje orodja: 420 mm. Kontaktirajte nas za dodatne informacije! Tsdpew S Hagefx Aqtjb

Stanje: rabljeno, Leto izdelave: 1985, Pressure 25 t Stroke rate 1500 strokes/min Total power requirement 20 kW O F F E R We can offer you the following ex stock, subject to prior sale and errors excepted, without obligation: BRUDERER High-speed automatic punching press with mass counterbalance Model BSTA 25 Year of manufacture 1985 _____ Nominal press force 25 t Stroke rate min. – max. 100 - 800 / 950 / 1075 / 1240 / 1350 / 1500 strokes/min Adjustable stroke lengths 13 / 16 / 19 / 25 / 32 / 38 mm Ram adjustment 51 mm Table size 530 x 530 mm Ram surface approx. 360 x 430 mm Shut height 230 - 281 mm Front opening for tool change approx. 540 mm Adjustable strip infeed height 80 – 150 mm Max. strip width / side clearance left 202 / 203 mm Max. strip stroke 120 mm Main drive approx. 18 kW Total drive approx. 20 kW - 380 V – 50 Hz Todsvu E I Djpfx Aqtsb Weight approx. 4,500 kg Accessories / Special equipment: • BRUDERER system for complete mass counterbalance using a transverse eccentric shaft and adjustable lever system. • BRUDERER strip feed unit, left-side mounted, model BBV 202/120, stroke adjustable, height-adjustable. • Continuous and single stroke modes adjustable, inching operation, piece counter, blow-out device. • Separate control cabinet and switch cabinet, vibration dampers. • Currently no decoiler available. • Large, complex soundproof cabin (disassembled). Condition: Very good condition! Previously used for precision electronic connector production. Please click here soon for a video of the machine: Delivery: ex stock, immediately available, FCA Metzingen Payment: net cash – upon receipt of invoice We look forward to receiving your order. More mechanical and hydraulic presses as well as other machine tools in stock – please check our current inventory on our website: geiger-

Stanje: zelo dobro (rabljeno), PC control type NC 400 (software) Feed-through motorized conveyor belts (qty.) 2 Horizontal drilling supports (qty.) 2 Drilling units per horizontal drilling support (qty.) 2 Tedpfxegk T Tto Aqtob Spindles per horizontal drilling unit (qty.) 11 Max. working width (mm) 3200 – Min. working width (mm) 205 (approx.) Lower vertical drilling supports (qty.) 6 Drilling units per lower vertical drilling support (qty.) 2 No. 4 upper vertical drilling supports Spindles per unit of upper drilling supports (qty.) 2 Upper vertical workpiece clamps (qty.) 5 Continuous screws for chip removal (qty.) 2 Digital display of position data (axis) Total connected load (kW) 48 The CNC control manages the movement (X-axis) of the horizontal drilling supports. The CNC control manages the movement (Y-axis) of the stops.

Stanje: rabljeno, Internal Thread Cutting Machine HAGEN & GOEBEL Type HG 10 Thread Cutting Machine, Vertical Tapping Machine Machine No. 4462 Year of manufacture approx. 1980 Thread cutting capacity in steel: M3 to M10 Thread cutting capacity in cast iron: M3 to M16 Thread cutting capacity in brass: M3 to M18 mm Throat depth: 250 mm Quill stroke: 80 mm Table size: 340 x 240 mm Tjdpoupbf Djfx Aqtob Spindle speed: 200-1000 rpm, 6 steps Motor power: 0.55 and 0.75 kW Power supply: 380 Volt, 50 Hz - 6 speed settings via 2 motor speeds and 3 belt stages - Thread pitch by means of guide cartridge - 2 guide cartridges included, with 1.0 mm and 1.25 mm thread pitch - Spindle mount with taper Ø 14.8 to 16 mm and 4 mm keyway - Table height adjustment with rack-and-pinion and hand crank on the round column - Quick-change tapping chuck, size 1, Ø 19 mm Required space (L x W x H): 850 x 550 x 1800 mm Weight: 255 kg Good condition

Stanje: rabljeno, Leto izdelave: 1985, številka stroja/vozila: 131 153, Press force: 40 t Tedpfx Asuqc Agoqteb Adjustable ram stroke: 8 - 50 mm Ram adjustment: 50 mm Installation height (stroke down, adjustment up): 310 mm Distance between uprights L-R: 820 mm Table clamping surface approx.: 810 x 450 mm Ram clamping surface approx.: 720 x 350 mm Through-hole in table: 600 x 110 mm Strokes per minute: 100 - 1,000 min⁻¹ Table height above floor: 1,030 mm Power requirement: 19.5 kW Machine weight approx.: 6.8 t Additional equipment

Stanje: rabljeno, Leto izdelave: 2000, Fully automatic shrink-wrapping machine with shrink tunnel - Automatic foil sealing machine Kallfass Universa 400 NT - Universal 450 N, Year 2000 - Serial no. S 04.00.9 Online video inspection via Skype video We would be pleased to welcome your visit – more machines in stock Available immediately – Can be inspected Located in Emskirchen / Nuremberg – Testing possible Tjdpfx Aqjr H N U Hotjb

Stanje: dober (rabljeno), KEN 311-OS Laboratory Glassware Washer High-Capacity Laboratory Glassware Washer The versatile solution for laboratories with high washing demands The KEN 311-OS meets the need for high-quality washing in laboratory environments Advantages - Simultaneous washing of instruments on up to 2 levels - High throughput capacity Tjdpfjiuz Dbex Aqtjb - User-friendly, ergonomically designed front controls - Front display with plain text - Low noise level - Minimal energy and chemical consumption, benefiting both the environment and operating costs - Minimal maintenance requirements Specifications: Height: 140 cm Width: 60 cm Depth: 64 cm Electrical connection: 400 Volt 3N 50 Hz Power: 10.1 kW Condition: This unit was decommissioned in fully working condition due to a site closure and has since been in storage. It appears to be in very good condition. Unfortunately, we do not have the expertise or equipment to perform further tests, so the device is sold as seen, in the condition shown in the images. If you wish to test or inspect the device prior to purchase, please contact us at any time to arrange an appointment. For more items – new and used – please visit our shop! International shipping costs available upon request!

Stanje: zelo dobro (rabljeno), Electronic control RT 483 No. 2 motorized throughfeed conveyor belts Feed speed (approx. 55 m/min) No. 2 horizontal drilling supports No. 1 drilling unit for each horizontal drilling support (1 x 1.5 HP) No. 20 spindles for each horizontal drilling unit Max. working width (mm): 3200 Min. working width (mm): 220 No. 7 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support (2 x 1.8 HP) No. 4 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports (2 x 1.8 HP) No. 4 upper vertical workpiece clamps No. 2 continuous screws for chip removal Digital display of position data (axis) Total connected load (kW): 35.1 CNC controls the movement (X-axis) of the horizontal drilling supports CNC controls the movement (Y-axis) of the stops Tedpfx Aofz Nansqtob

Stanje: rabljeno, številka stroja/vozila: HR6-1200, Rabljeni avtomatski polirni stroj z vrtljivo mizo HR6-1200 Proizvajalec: Hau Todpfxjyntrho Aqtjb Vrtljiva miza s 6 delovnimi vreteni in 3 polirnimi postajami z visokotlačnimi pištolami, motorji 5,5 kW, Pnevmatska pritrditev s prijemali Schunk PZN 100, razdelilnik Schunk. Krmilna omara Na voljo so 3 avtomatski polirni stroji z vrtljivo mizo.

Stanje: rabljeno, Leto izdelave: 1987, Pressure 40 t Strokes 500 strokes/min Total power requirement 5.5 kW O F F E R We can offer you, subject to prior sale and errors, from stock, non-binding: SCHAAL High-Speed Punching Press Model: SEP 40 Year of manufacture: 1987 _____ Nominal Pressing Force: 40 t Stroke range (min – max): 100 – 500 strokes/min Adjustable stroke length: 8 – 70 mm Ram adjustment: 70 mm Table size: 550 x 580 mm Ram surface (top, approx.): 300 x 340 mm Die height: 255 mm Front opening for tool change (approx.): 560 mm Adjustable strip feed height: 120 mm Max. strip width / lateral clearance left: 260 / 260 mm Main drive approx.: 7.5 kW Total drive approx.: 10 kW - 380 V – 50 Hz Weight approx.: 4,000 kg Accessories / Special Equipment • Strip gripper feed unit, left side mounted, Type SZV 2, stroke adjustable, height adjustable • SANDER & EBERT horizontal decoiler, tension-controlled • Continuous stroke and single stroke adjustable, inching mode, piece counter, air blow-off unit • Separate free-standing control and switch cabinets, vibration dampers Tjdpfx Aqsvu E Iwjteb • Large, elaborate soundproof cabin (disassembled) Condition: Very good! Used for precision electronic connectors, regularly maintained! Please click here soon for a video of the machine: Delivery: from stock, immediate, FCA Metzingen Payment: net – upon receipt of invoice We look forward to your order. Further mechanical and hydraulic presses and other machine tools in stock – please check our inventory on our website: geiger-.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Semi- & Fully Automatic Pallet Wrapping Machine Manufacturer: Cousins Model: LPSWA-CE (“The Switch Semi2Auto”) Operating Mode: Semi-automatic & fully automatic Year of Manufacture: 2021/2022 Features and Specifications of the LP-SWA SERIES Tjdpjwb A N Refx Aqtsb Production Speed: Up to 35 loads per hour. Load Capacity: Maximum load weight: 4,500 lbs dynamic – 10,000 lbs static Maximum load size to safely clear the tower: 67" x 67" (96" load diagonal) x 80" H Maximum load size to remain within the turntable: 46" W x 46" L (65" load diagonal) x 80" H Low-Profile Turntable: 65-inch diameter, laser-cut steel plate with full perimeter deck protection. Maintenance-free 54-roller bearing support system. Turntable height 2.813 inches from the floor. ANSI No. 50 direct chain drive with chain tensioner. Turntable speed adjustable between 3 and 12 RPM, with smooth start acceleration Film Carriage Lift: 1/2 HP DC motor with variable speed ANSI No. 40 direct chain drive with shock absorber and anti-drop safety Automation Features: Fully electric Cousins Smart Engineering has developed the advanced A-Arm cutting and holding device. It provides significant productivity gains and safety advantages. This technology is exclusive to Cousins machinery. This unique method of attaching and cutting stretch film offers the following advantages: • Selectable overwrap (top banding) function • Stabilizes the load early in the wrap cycle • Places film tail at the top of the load instead of the bottom • No film clamp on the turntable that could be damaged by debris or operator error – additionally, no slip rings are needed to power the turntable, reducing maintenance • Load placement on the turntable is non-critical • No air lines or noisy compressors • New automatic load detection safety function during the first rotation: recognizes uneven or partially stacked upper layers and automatically adjusts A-Arm height to avoid obstructions • A-Arm anti-drop safety Control Features: Electronic control with LED interface Wireless start/stop remote control with one transmitter (additional transmitters available) Off – On – Reset switch and operation indicator Automatic wrap cycle start/pause with a single button Cycle pause for applying top sheets Reinforced wrap control for the middle of the load Emergency stop button Turntable jog button Buttons for lowering and raising the film carriage Film tension (force-to-load) control Separate speed controls for raising and lowering the film carriage Variable speed control for the turntable Three-beam automatic load height detection sensor for dark or glossy loads Separate controls for 1 to 12 revolutions for top and bottom wrapping Selectable parameters for reduced film tension when wrapping the top and/or bottom edges Non-proprietary UL/CSA approved components A – B – C wrap program selector with the ability to enter and store custom wrap parameters for each program Financing through our partner bank is also available. komplett-konzept.leasingo.de You can find more new and used items in our shop! International shipping costs on request!

Stanje: rabljeno, Polavtomatski stroj za pihanje PET plastenk Tjdpfxeugu E Rj Aqtjb Proizvajalec: FERENC Tip: F-1400 Leto proizvodnje: 2006 Kapaciteta: cca 800 kosov/uro Število orodij v stroju: 2 x 5 L (pokrivka 48 mm) Dimenzije peči: - dolžina: 900 mm - širina: 900 mm - višina: 1200 mm Dimenzije pihalnega stroja: - dolžina: 1800 mm - širina: 750 mm - višina: 2000 mm Teža kompleta: 1200 kg Tehnično stanje: rabljeni stroj

Stanje: rabljeno, Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 919254, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, pnevmatska povezava: 6 letvica, As part of the winding up of a jeans factory, a GLOBAL US 63900 CH-NA-AUT automatic industrial chainstitch hemming machine is available for sale, offered as a complete workstation. This modern unit (year of manufacture 2019) is specifically designed for high-quality hemming on denim, trousers, and workwear. Based on the renowned 63900 platform, it produces the classic chainstitch appearance highly sought after in professional garment manufacturing. The machine features automated functions such as thread trimming and pneumatic operation, enabling efficient and consistent production with minimal operator intervention. The unit was in ongoing production use and remained fully functional up until the factory closure. The machine was serviced on 27/02/2026 and recorded in operation on video in April 2026. Main Features: • Automatic chainstitch hemming system • High production speed • Classic 63900 chainstitch pattern (denim standard) • Automatic thread trimmer • Pneumatic presser foot lift • Consistent material feed and constant seam quality • Modern machine (2019) with low wear Scope of delivery: • GLOBAL US 63900 CH-NA-AUT sewing head • Industrial worktable • Motor and control unit • Foot pedal • Thread stand • Integrated hemming and trimming system • Visible suction system for threads and fabric remnants Technical Specifications: • Manufacturer: Global Selection (Netherlands) • Model: US 63900 CH-NA-AUT • Year of manufacture: 2019 • Stitch type: Chainstitch • Max. speed: approx. 5,000 stitches/min • Needle system: DVx57 • Power supply: 220V • Pneumatic connection required Condition: • Used, in very good production condition • Fully operational until factory closure • Serviced on 27/02/2026 • Normal signs of use • Sale as viewed, without warranty Typical Applications: • Hemming on denim (jeans) • Apparel finishing • Workwear • Chainstitch hemming operations Location: Valga, Estonia Todpfxoy Ipu Te Aqtob Dismantling & Transport: Dismantling and transport are the responsibility of the buyer.

Stanje: dober (rabljeno), Leto izdelave: 2009, 11 spindle motors. Glass thickness: 3 to 30 mm. Minimum glass size: 85 x 150 mm. Feed speed: 0.5 to 5 m/min. Equipped with water tank and pump. Working direction: from right to left. Working height: 780 mm. Total length: 8,520 mm. Depth: 1,130 mm. Total height: 4,850 mm. Tedpfjvk Ed Rsx Aqteb

Stanje: rabljeno, Automatic Multipurpose Iron Twister GLASER Type GDM 3 motorized bar twisting machine, bar twisting machine with ring bending machine attachment, profile bending machine Year of manufacture: 1977 Twisting length: 1200 mm Rotational speed (level 1): approx. 10 rpm Rotational speed (level 2): approx. 20 rpm - Spindle drive via large geared motor - Arch and ring bending machine, not complete Tsdpfx Aqow Dgi Tjtob - with HAWE hydraulic power unit up to 600 bar for auxiliary functions - Square drive for twisting tools Motor power: 3.3 kW Power supply: 380 Volt, 50 Hz Dimensions (L x W x H): 2120 x 720 x 1100 mm Weight: approx. 600 kg Good condition

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Tip: Avtomatski stroj za lepljenje list na list Proizvajalec: Lamina System AB, Švedska Model: Laminating 1420 FA Tehnične specifikacije Maksimalna velikost lista: Širina 1420 mm Minimalna velikost lista: Širina 200 mm / dolžina 350 mm Zgornji list: 130 - 450 gm/m2, 1 pts = 28,25 g/m2 Spodnji list: od 250 gm/m2 Debelina: 0,6 - 10 mm (0,016 - 0,39*) Lepilo: PVA tip ali po specifikaciji Višina podajalnika: Zgoraj: 500 mm Spodaj: 800 mm Tjdpfx Aqoxnzmfotob Natančnost registracije:* < +/- 0,50 mm Delovna hitrost:* do 3000 listov/uro Skupna instalirana moč: 4,0 kW Elektrika: 400 V, 3-fazno, nevtralni vodnik, 50/60 Hz Zahteve za zrak: 6 bar; 0,6 MPa ali 80 psi Približno 500 l/min* olje- in vodno čist zrak