Pressta Eisele Pv 8 nakup rabljenega (36.309)

Stanje: rabljeno, Leto izdelave: 1991, Premer žaginega lista: 275 mm Premer reza: 90 mm Hitrost reza: 80 m/min Kotna krožna žaga EISELE VMS 120 Ø žaginega lista: 275 mm Dcjdpfox Avtvjx Aplsg Območje reza pri 90° okroglo: 90 mm Območje reza pri 90° pravokotno: 75 x 75 mm Območje reza pri kotu 45° pravokotno: 75 x 75 mm Hitrost žaginega lista: 40/80 obr/min Pogonski motor: 380 V, 1/1,2 kW Zahtevan prostor: 700 x 600 x 1580 mm Teža: cca 180 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Manual cleaning is carried out using special gloves in the front section. The cleaning effectiveness is ensured by a washing pump (0–8 BAR) and a special spray nozzle. These units allow the cleaning fluid temperature to be set up to 60°C. The pressure is adjustable from 0 to 8 bar. Technical Data: Dcjdper Hm R Tefx Apleg Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg Spray pressure: adjustable 0–8 bar Tank volume: 75 litres / Heating power: 2 kW Standard features: • Blow-off gun inside the chamber • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel plates above the tank • Upward-opening lid with two access ports and gloves • Tempered glass viewing window • Door opening/closing system supported by gas struts • Door opening monitoring via safety limit switch • Filter on the pump intake side (500 micron) • Foot switch for operating the cleaning pump • Interior lighting • 600 mm neoprene gloves (chemical resistant) • Adjustable feet (+/- 50 mm) • Stainless steel cartridge filter with pump (10/25/50 micron) • External mini pneumatic oil separator

Stanje: rabljeno, Leto izdelave: 1979, Premer reza: 440 mm Teža stroja: cca. 780 kg +++++ Dodjf Dwa Uspfx Aplecg Upoštevajte, da je stroj razstavljen in pripravljen za nakladanje. Zaradi tega prikaz pod napetostjo ali izdelava videoposnetka nista mogoča. Naš oglas vsebuje najrelevantnejše fotografije v najboljši možni kakovosti. Pošiljanje dodatnih slik žal ni mogoče. +++++

Stanje: rabljeno, Hot runner controller PSG 8, 8 zones, 230 Volt Price: €2,250 Contact: Mr. Rainer Eckerle Dsdpfx Aewgb Ngepljcg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Behringer Eisele VMS 400 A metal circular saw for processing almost all grades of steel. Integrated coolant system and micro-spray unit, selectable via the control system as needed Hydraulic saw feed and quick-action vice with clamping pressure reduction NC control with graphic display and keypad Three selectable operating modes (manual, series, and single cuts) Convenient saw unit stroke adjustment via clamping lever Can be combined with infeed and outfeed roller conveyors Manufacturer: Behringer Eisele Model: VMS 400 A Metal circular saw Year: 2013 Condition: Used, very good Cutting capacities: Flat 90° [mm]: 200 x 120 Flat 45° [mm]: 140 x 120 Flat 30° [mm]: 100 x 100 Square 90° [mm]: 120 Square 45° [mm]: 120 Square 30° [mm]: 100 Round 90° [mm]: 140 Round 45° [mm]: 140 Round 30° [mm]: 110 Feed length: 800 mm Motor power: 2.0 / 2.6 kW Speeds: 8 / 16 / 32 / 64 rpm Saw blade diameter: 400 mm Saw blade feed: hydraulic Material feed: ball screw spindle Clamping device: hydraulic Minimum quantity lubrication Chip removal brush Machine dimensions: Length: 3,100 mm Width: 1,500 mm Height: 2,000 mm Weight: 1,350 kg Material support height: 920 mm Dcodpfx Ajxwmckoplog Scope of delivery: Documentation 4x saw blades 1x 2m infeed roller conveyor

Stanje: novo, Manufacturer: Behringer Eisele Model: VMS 350 Condition: NEW Maximum cutting section, round at 90°: 120 mm Maximum cutting section, rectangular at 90°: 170 x 100 mm Dodpfx Aexwl Rgsplecg Maximum cutting section, round at 45°: 120 mm Maximum cutting section, rectangular at 45°: 120 x 100 mm Saw blade diameter: 350 mm Saw blade thickness: 3 mm Bore diameter: 40 mm Adjustable saw blade speed: 17 rpm / 34 rpm Swiveling machine head: 45-90-45-30° Total motor power: 1.4/1.9 kW Width: 900 mm Dimensions (L x W x H): 1050 x 900 x 1900 mm

Stanje: rabljeno, Gear milling cutter Module 8 Dedpfsdklt Nsx Aplecg 20 degrees Length: 1800 mm Diameter: 120 mm Bore: 40 mm

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Rohe & Schwarz UPV avdio analizator z naslednjimi opcijami: Dcsdpfox H Ucaex Apljg UPV-K1 UPV-K4 UPV-U2 UPV-B2 UPV-B3 UPV-B42 UPV-B48 Operacijski sistem: Windows XP #8410

Stanje: dober (rabljeno), Leto izdelave: 2009, številka stroja/vozila: 10014344, Ponudba 25481 Tehnični podatki: - Premer žaginega lista do 350 mm - Pomik žaginega lista preko ročnega ročaja - Največja odprtina pnevmatskega primeža: 205 mm - Območje rezanja - pri premeru žaginega lista 350 mm: Dcodjx Tqnfspfx Aplog - pri 90° okroglo: 120 mm - štirikotno: 110 mm - ploščato do 200 x 90 mm ali 140 x 110 mm - pri 45° okroglo: 100 mm - ploščato: 100 x 100 mm - Nastavljiv kot reza: levo do 45° - desno do 45° - 30° - 2 hitrosti vrtenja žaginega lista: 17 in 34 1/min - Pogon: 400 V / 1,4 / 1,9 kW - Priključek za zrak: 6 – 8 bar - Mikro razpršilo – naprava za hlajenje - Potreben prostor: pribl. Š 850 x V 1750 x G 950 mm - Teža: pribl. 400 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Rotation speed: 1,500/3,000 rpm Cutting speed: 2,100 – 4,200 m/min Saw height adjustment: electronic Working range (square): max. 170 x 170 mm Working range (flat): max. 300 x 150 mm Working range (round): max. 200 mm Saw feed rate: 0 – 40 mm/s, continuously adjustable Cut length: 5-950 mm (extension to 9,999 mm via multiple stroke) Feed speed (max.): 500 mm/s Weight: approx. 1,900 kg Dimensions (LxWxH): 2,200 mm x 2,700 mm x 1,950 mm The machine is in as-new technical and visual condition following a completed retrofit. Thanks to its equipment and design, the machine is highly efficient and versatile for a wide range of applications. The programmed HMI control system ensures easy and highly profitable operation of the plant. The soundproof cabin minimizes noise emissions to a very low level. The machine is fully overhauled at our premises according to customer specifications. Among others, the following components are renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Replacement of the ball screw spindle - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of valve terminal - Optimization of extraction performance - Overhaul of the minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the cabin Additional machine features: - Soundproof enclosure - Kerf expansion (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed upon, we provide a 6-month warranty for our systems on all parts overhauled or replaced by us. Labor costs and wear parts are excluded from the warranty. Optional (available on request): - Bar clamping device for parallel sawing of multiple workpieces - Flat magazine for automatic loading of pre-materials up to 6 meters in length - Roller conveyors for pre-material - Reinforced 18.0 kW (frequency-controlled) motor - Delivery and installation at your facility Dcjdpjuiy Hrofx Apljg - Training for your personnel

Stanje: novo, Mitsubishi HA300NCB-S SPEC NO 7Y018 + Encoder OSA104 J4AVP3XYPV, unused with storage marks, 100% functional, scope of delivery as shown in the photos. Dcedpfsqyrrnex Aplog

Stanje: pripravljen za uporabo (rabljen), Emod Type VKM64/23-90 3~ motor, motor no. 7885881, 0.65 kW, 8450 rpm, used, in good condition, 100% functional. Dcodpji D Huzsfx Apleg

Stanje: dober (rabljeno), Leto izdelave: 1980, številka stroja/vozila: 2038, Offer 24272 Technical Data: - Saw blade dimensions: 300 mm - Saw blade speed: 2,800 rpm - Cutting capacity: - at 90°: 160 x 20 mm 100 x 80 mm - at 45°: 100 x 40 mm - Drive: 400 V / 1.5 kW - Required space: approx. W 400 x H 800 x D 600 mm Dsdpfx Ajt H Ibmjplocg - Weight: approx. 80 kg - Table stand: W 900 x H 750 x D 500 mm

Stanje: rabljeno, Mitre saw, aluminium circular saw, semi-automatic aluminium circular saw, cross-cut saw, glazing bead saw Dcodpfxjc Ir Dvo Aplog - Processing of: flat, angle and solid material, tubes and special profiles - Saw blade: Ø 400 mm - Saw blade: tiltable - Drive: 2.5 kW - Speed: 2800 rpm - Pneumatic material clamping - Pneumatic feed - With: chip extraction - Dimensions: 1100/900/H1160 mm - Weight: 238 kg

Stanje: rabljeno, Pneumatic cylinder, air cylinder, standard cylinder, clamping cylinder -Festo type: DN-80-100-PPV -Piston diameter: 80 mm -Piston rod: Ø 25 mm -Stroke: 100 mm -Max. pressure: 12 bar -Pneumatic cushioning: adjustable on both sides -Dimensions: 320/95/H125 mm -Weight: 4.8 kg Dcjdpfxsffk Iqe Apleg

Stanje: rabljeno, Pneumatic cylinder, air cylinder, standard cylinder, clamping cylinder - Manufacturer: Festo - Model: DNC-80-200-PPV-A - Piston diameter: Ø 80 mm - Stroke: 200 mm - Max. pressure: 12 bar - Dimensions: 420/95/H95 mm - Weight: 5 kg Dcsdpfxsd S Daie Aplog

Stanje: rabljeno, Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic piston, air piston - Stroke: 80 mm - Piston diameter: 50 mm Dcedpfx Apefbg Rceleg - Piston rod: 20 mm - End position cushioning: adjustable on both sides - Max. pressure: 12 bar - Dimensions: 300/64/H64 mm - Weight: 1.95 kg

Stanje: rabljeno, Pneumatic cylinder, air cylinder, standard cylinder, clamping cylinder - Manufacturer: Festo Dodjdkx Tuspfx Apljcg - Model: DN-80-25-PPV - Piston diameter: Ø 80 mm - Stroke: 25 mm - Pressure: max. 12 bar - Pneumatic cushioning: adjustable on both sides - Quantity: 2 available - Price: per unit - Dimensions: 95/95/H245 mm - Weight: 4 kg

Stanje: rabljeno, Pneumatic cylinder, air cylinder, standard cylinder, clamping cylinder - Manufacturer: Festo - Model: DN-80-400-PPV - Piston diameter: Ø 80 mm - Stroke: 400 mm - Pressure: max. 12 bar - Pneumatic cushioning: adjustable on both ends - Quantity: 1 unit available Dcedpfx Aodkzvnepleg - Price: per piece - Dimensions: 97/97/H675 mm - Weight: 8.3 kg

Stanje: rabljeno, Pneumatic cylinder, air cylinder, pneumatic piston, air piston - Manufacturer: Festo, standard cylinder type DNU-80-570-PPV-A - Stroke: 570 mm - Piston: Ø 80 mm - Piston rod: Ø 25 mm / M20x1.5 - Price: per piece Dcjdpfx Apjfw Rwxeljg - Quantity: 2 pieces - Dimensions: 840/95/H95 mm - Weight: 7.6 kg/piece

Stanje: rabljeno, Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, standard cylinder type DNC-40-80-PPV-A -Stroke: 80 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm/M12 x 1.25 Dcodpfofxrgdex Aplog -Price: per unit -Quantity: 2 units -Dimensions: 240/55/H87 mm -Weight: 1.3 kg/unit

Stanje: rabljeno, Pneumatic cylinder, air cylinder, standard cylinder, clamping cylinder - Manufacturer: Festo - Type: DKE-40-800-PPV-A - Piston diameter: Ø 40 mm Dcsdpodki Rpefx Aplog - Stroke: 800 mm - Pressure: max. 10 bar - Integrated clamping unit - PPV pneumatic cushioning: adjustable on both sides - A for proximity switch - Quantity: 1 cylinder available - Price: per piece - Weight: 18.7 kg

Stanje: rabljeno, Guide cylinder, guided pneumatic cylinder, pneumatic cylinder, compact cylinder -Type: DFM-63-80-B-PPV-A-GF Dcedpfx Aodkpa Nepleg -Piston: Ø 63 mm -Stroke: 80 mm -Pneumatic cushioning -Adjustable on both sides -Sliding guide -Weight: 7.34 kg

Stanje: rabljeno, Pneumatic cylinder, air cylinder, standard cylinder, clamping cylinder - Manufacturer: Festo, Type DNU-80-500-PPV-A - Piston diameter: 80 mm - Stroke: 500 mm Dsdpfofd Iugjx Aplscg - Max. pressure: 12 bar - Pneumatic cushioning: adjustable on both sides - Dimensions: 730/155/H95 mm - Weight: 6.9 kg

Stanje: dober (rabljeno), Pnevmatski cilinder, zračni cilinder, pnevmatski bat, zračni bat - Proizvajalec: Festo, standardni cilinder tip DSBC-80-300-PPVA-N3A2 - Hod: 300 mm - Bat: Ø 80 mm Dedpfxexwkn Rs Apljcg - Batnica: Ø 25 mm - Največji tlak: 12 bar - Količina: na voljo 4 cilindri - Cena: na kos - Dimenzije: 515/235/V95 mm - Teža: 7,0 kg/kos